good by nios

Get rid of NIOS support. We try to support NIOSII.

1 files changed, 0 insertions, 473 deletions

diff --git a/libc/sysdeps/linux/nios/NM_Macros.S b/libc/sysdeps/linux/nios/NM_Macros.S
deleted file mode 100644
index da6136593..000000000
--- a/libc/sysdeps/linux/nios/NM_Macros.S
+++ /dev/null
@@ -1,473 +0,0 @@
-
-;------------------------------
-; Macros I: Faux Instructions
-;
-; The following "faux instructions" are
-; implemented here as macros:
-;
-; MOVIP register,constant		MOVI with optional PFX & MOVHI, or BGEN
-; ADDIP register,constant		PFX and ADDI with optional PFX
-; SUBIP register,constant		PFX and SUBI with optional PFX
-; CMPIP register,constant		PFX and CMPI with optional PFX
-;
-; MOVI16 register,constant		PFX and MOVI
-; MOVI32 register,constant		PFX, MOVI, PFX, and MOVHI
-; MOVIA  register,constant		PFX and MOVHI on Nios32, and PFX and MOVI
-;
-; ANDIP register,constant		PFX and ANDI
-; ANDNIP register,constant		PFX and ANDN
-; ORIP register,constant		PFX and ORI
-; XORIP register,constant		PFX and XORI
-;
-; _BSR address						MOVIP address to %g7, and CALL
-; _BR address						MOVIP address to %g7, and JMP
-;
-; BEQ address						SKPS cc_nz and BR, has delay slot
-; BNE address						SKPS cc_z and BR, has delay slot
-; BLE address						SKPS cc_gt and BR, has delay slot
-; BLT address						SKPS cc_ge and BR, has delay slot
-; RESTRET							RESTORE and JMP %i7 
-;
-;-------------------------------
-; Macros II: Printing
-;
-; These macros are guaranteed *not*
-; to have branch delay slot after them.
-;
-; NM_PrintChar char
-; NM_Print "string"
-; NM_PrintLn "string"			Follows it with a carriage return
-; NM_PrintRegister reg			For debugging, prints register name & value
-;
-;-------------------------------
-; Macros III: Inline Debugging
-;
-; These macros print various information
-; using large sections of expanded inline code.
-; They each use either few or no registers.
-; Thus, they may be safely used in interrupt handlers.
-;
-; NM_D_TxChar char			print char to UART, affects no registers
-; NM_D_TxRegister char,char,register	prints the two characters, and the hex register value
-
-; --------------------------------------
-
-
-		.macro	_pfx_op	OP,reg,val,pForce=0
-		.if		(\pForce) || ((\val) > (31)) || ((\val) < (0))
-		PFX		%hi(\val)
-		.endif
-		\OP		\reg,%lo(\val)
-		.endm
-
-		.macro	_bgen reg,val,bit
-		.if ((\val)==(1<<\bit))
-		BGEN	\reg,\bit
-		.equ	_bgenBit,1
-		.endif
-		.endm
-
-	;------------------------
-	; MOVIP %reg,32-bit-value
-		.macro	MOVIP reg,val
-		; Methodically test every BGEN possibility...
-		.equ	_bgenBit,0
-.if 1
-		_bgen \reg,\val,0
-		_bgen \reg,\val,1
-		_bgen \reg,\val,2
-		_bgen \reg,\val,3
-		_bgen \reg,\val,4
-		_bgen \reg,\val,5
-		_bgen \reg,\val,6
-		_bgen \reg,\val,7
-		_bgen \reg,\val,8
-		_bgen \reg,\val,9
-		_bgen \reg,\val,10
-		_bgen \reg,\val,11
-		_bgen \reg,\val,12
-		_bgen \reg,\val,13
-		_bgen \reg,\val,14
-		_bgen \reg,\val,15
-		_bgen \reg,\val,16
-		_bgen \reg,\val,17
-		_bgen \reg,\val,18
-		_bgen \reg,\val,19
-		_bgen \reg,\val,20
-		_bgen \reg,\val,21
-		_bgen \reg,\val,22
-		_bgen \reg,\val,23
-		_bgen \reg,\val,24
-		_bgen \reg,\val,25
-		_bgen \reg,\val,26
-		_bgen \reg,\val,27
-		_bgen \reg,\val,28
-		_bgen \reg,\val,29
-		_bgen \reg,\val,30
-		_bgen \reg,\val,31
-
-		; If no bgen fit...
-.endif
-		.if !_bgenBit
-			.if ((\val) & 0xFFE0)
-				PFX %hi(\val)
-			.endif
-			MOVI \reg,%lo(\val)
-			.if __nios32__
-				.if ((\val) & 0xffff0000)
-					.if ((\val) & 0xFFE00000)
-						PFX %xhi(\val)
-					.endif
-					MOVHI \reg,%xlo(\val)
-				.endif
-			.endif
-		.endif
-
-		.endm
-
-	; ADDIP %reg,16-bit-value
-		.macro	ADDIP reg,val
-		_pfx_op	ADDI,\reg,\val
-		.endm
-
-	; SUBIP %reg,16-bit-value
-		.macro	SUBIP reg,val
-		_pfx_op	SUBI,\reg,\val
-		.endm
-
-	; CMPIP %reg,16-bit-value
-		.macro	CMPIP reg,val
-		_pfx_op	CMPI,\reg,\val
-		.endm
-
-	; ANDIP %reg,16-bit-value
-		.macro	ANDIP reg,val
-		PFX		%hi(\val)
-		AND		\reg,%lo(\val)
-		.endm
-
-	; ANDNIP %reg,16-bit-value
-		.macro	ANDNIP reg,val
-		PFX		%hi(\val)
-		ANDN		\reg,%lo(\val)
-		.endm
-
-	; ORIP %reg,16-bit-value
-		.macro	ORIP reg,val
-		PFX		%hi(\val)
-		OR			\reg,%lo(\val)
-		.endm
-
-	; XORIP %reg,16-bit-value
-		.macro	XORIP reg,val
-		PFX		%hi(\val)
-		XOR		\reg,%lo(\val)
-		.endm
-
-	; BEQ addr
-		.macro	BEQ addr
-		IFS		cc_eq
-		BR			\addr
-		.endm
-
-	; BNE addr
-		.macro	BNE addr
-		IFS		cc_ne
-		BR			\addr
-		.endm
-
-	; BLE addr
-		.macro	BLE addr
-		SKPS		cc_gt
-		BR			\addr
-		.endm
-
-	; BLT addr
-		.macro	BLT addr
-		SKPS		cc_ge
-		BR			\addr
-		.endm
-
-		.macro	digitToChar reg
-		ANDIP	\reg,0x000f
-		CMPI	\reg,10
-		SKPS	cc_lt
-		ADDI	\reg,'A'-'0'-10
-		PFX		%hi('0')
-		ADDI	\reg,%lo('0')
-		.endm
-
-; PUSHRET == dec sp, and stash return addr
-	.macro	PUSHRET
-	SUBI		%sp,2
-	ST			[%sp],%o7
-	.endm
-; POPRET == pop and jump
-	.macro	POPRET
-	LD			%o7,[%sp]
-	JMP		%o7
-	ADDI		%sp,2		; branch delay slot
-	.endm
-
-; RESTRET = restore & return
-	.macro	RESTRET
-	JMP		%i7
-	RESTORE
-	.endm
-
-	;--------------------
-	; MOVI16 %reg,Address
-	;
-	.macro	MOVI16	reg,val
-	PFX	%hi(\val)
-	MOVI	\reg,%lo(\val)
-	.endm
-
-	;--------------------
-	; MOVI32 %reg,Address
-	;
-	.macro	MOVI32	reg,val
-	PFX	%hi(\val)
-	MOVI	\reg,%lo(\val)
-	PFX	%xhi(\val)
-	MOVHI	\reg,%xlo(\val)
-	.endm
-
-	;--------------------
-	; MOVIA %reg,Address
-	;
-	.macro	MOVIA		reg,val
-	.if __nios32__
-		MOVI32 \reg,\val
-	.else
-		MOVI16 \reg,\val
-	.endif
-	.endm
-
-	;--------------------
-	; _BR
-
-	.macro _BR target,viaRegister=%g7
-	MOVIA	\viaRegister,\target@h
-	JMP	\viaRegister
-	.endm
-
-	;--------------------
-	; _BSR
-
-	.macro _BSR target,viaRegister=%g7
-	MOVIA	\viaRegister,\target@h
-	CALL	\viaRegister
-	.endm
-
-	;---------------------
-	; NM_Print "Your String Here"
-	;
-	.macro	NM_Print	string
-
-	BR		pastStringData\@
-	NOP
-
-stringData\@:
-	.asciz	"\string"
-	.align 1		; aligns by 2^n
-pastStringData\@:
-	MOVIA		%o0,stringData\@
-	_BSR		NR_TxString
-	NOP
-	.endm
-
-	.macro	NM_PrintLn string
-	NM_Print	"\string"
-	_BSR		NR_TxCR
-	NOP
-	.endm
-
-	.macro	NM_PrintRegister reg	; affects %g0 & %g1 & %g7, but thrashes the CWP a bit
-	SAVE		%sp,-16
-	NM_Print	"\reg = "
-	RESTORE
-	MOV		%g0,\reg
-	SAVE		%sp,-16
-	MOV		%o0,%g0
-	_BSR		NR_TxHex
-	NOP
-	_BSR		NR_TxCR
-	NOP
-	RESTORE
-	.endm
-
-	.macro	NM_PrintChar char
-	MOVIP		%o0,\char
-	_BSR		NR_TxChar
-	NOP
-	.endm
-
-	.macro	NM_Print2Chars char1,char2
-	MOVIP		%o0,(\char2<<8)+\char1
-	_BSR		NR_TxChar
-	NOP
-	_BSR		NR_TxChar
-	LSRI		%o0,8
-	.endm
-
-
-
-; ---------------------------
-; Completely inline UART sends
-; Send the char, or %g7 if not there.
-; Trashes %g5 and %g6 and %g7...
-
-	.macro	NM_TxChar char=0
-;NM_D_Delay 1000
-	MOVIA	%g6,NA_UARTBase
-txCharLoop\@:
-	PFX	2
-.if \char
-	LD	%g7,[%g6]
-	SKP1	%g7,6
-.else
-	LD	%g5,[%g6]
-	SKP1	%g5,6
-.endif
-	BR	txCharLoop\@
-	NOP
-.if \char
-	MOVIP	%g7,\char
-.endif
-	PFX	1
-	ST	[%g6],%g7
-;NM_D_Delay 4
-	.endm
-
-		.macro NM_TxCR
-		NM_TxChar 13
-		NM_TxChar 10
-		.endm
-
-		.macro NM_TxHexDigit,reg,shift
-		MOV		%g7,\reg
-		LSRI		%g7,\shift
-		ANDIP		%g7,0x000f
-		CMPI		%g7,10
-		SKPS		cc_lt
-		ADDIP		%g7,'A'-'0'-10
-		ADDIP		%g7,'0'
-		NM_TxChar
-		.endm
-
-		.macro NM_TxHex
-
-	.if __nios32__
-		NM_TxHexDigit %g0,28
-		NM_TxHexDigit %g0,24
-		NM_TxHexDigit %g0,20
-		NM_TxHexDigit %g0,16
-	.endif
-
-		NM_TxHexDigit %g0,12
-		NM_TxHexDigit %g0,8
-		NM_TxHexDigit %g0,4
-		NM_TxHexDigit %g0,0
-		.endm
-
-
-
-
-
-
-
-
-
-
-; ----------------------
-; The following macros are
-; rather mighty. They expand
-; to large inline code for
-; printing various things to
-; the serial port. They are
-; useful for debugging
-; trap handlers, where you
-; can't just go and call
-; NR_TxChar and such, because,
-; well, the CWP might be
-; off limits!
-;
-; They do, however, presume
-; that the stack is in good
-; working order.
-
-
-.macro NM_D_PushGRegisters
- 	SUBIP %sp,16+69				; oddball number so if we accidentally see it, it looks funny.
-	STS	[%sp,16+0],%g0
-	STS	[%sp,16+1],%g1
-	STS	[%sp,16+2],%g2
-	STS	[%sp,16+3],%g3
-	STS	[%sp,16+4],%g4
-	STS	[%sp,16+5],%g5
-	STS	[%sp,16+6],%g6
-	STS	[%sp,16+7],%g7
-	.endm
-
-.macro NM_D_PopGRegisters
-	LDS	%g0,[%sp,16+0]
-	LDS	%g1,[%sp,16+1]
-	LDS	%g2,[%sp,16+2]
-	LDS	%g3,[%sp,16+3]
-	LDS	%g4,[%sp,16+4]
-	LDS	%g5,[%sp,16+5]
-	LDS	%g6,[%sp,16+6]
-	LDS	%g7,[%sp,16+7]
-	ADDIP	%sp,16+69				; must match the push
-	.endm
-
-
-.macro NM_D_TxChar	c
-	SUBI	%sp,16+8		; 32 or 16 bit, that's enough space
-	STS	[%sp,16+0],%g6
-	STS	[%sp,16+0],%g7
-	NM_TxChar \c
-	LDS	%g6,[%sp,16+0]
-	LDS	%g7,[%sp,16+1]
-	ADDI	%sp,16+8
-	.endm
-
-.macro NM_D_TxChar3 c1,c2,c3
- NM_D_TxChar '<'
- NM_D_TxChar \c1
- NM_D_TxChar \c2
- NM_D_TxChar \c3
- NM_D_TxChar '>'
-.endm
-
-.macro NM_D_TxRegister r,n,reg
- NM_D_PushGRegisters
- NM_TxChar '('
- NM_TxChar \r
- NM_TxChar \n
- NM_TxChar ':'
- MOV		%g0,\reg
- NM_TxHex
- NM_TxChar ')'
- NM_D_PopGRegisters
-.endm
-
-.macro NM_D_TxReg r,n,reg
-	NM_D_TxRegister \r,\n,\reg
-.endm
-
-; Do a delay loop, affects no registers.
-
-.macro NM_D_Delay d
-	SUBI	%sp,16+4
-	STS	[%sp,16+0],%g0
-	MOVIP	%g0,\d
-NM_D_DelayLoop\@:
-	IFRnz	%g0
-	 BR	NM_D_DelayLoop\@
-	SUBI	%g0,1
-	LDS	%g0,[%sp,16+0]
-	ADDI	%sp,16+4
-.endm
-