Renamed as extra/Configs/Config.i386

1 files changed, 0 insertions, 157 deletions

diff --git a/extra/Configs/Config.x86 b/extra/Configs/Config.x86
deleted file mode 100644
index 1876d05a0..000000000
--- a/extra/Configs/Config.x86
+++ /dev/null
@@ -1,157 +0,0 @@
-# Library Configuration rules for uClibc
-#
-# This file contains rules which are shared between multiple Makefiles.  Feel
-# free to adjust to taste...  
-#  -Erik Andersen <andersen@lineo.com> <andersee@debian.org>
-# 
-# Copyright (C) 2000 by Lineo, inc.
-#
-# This program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU Library General Public License as published by the Free
-# Software Foundation; either version 2 of the License, or (at your option) any
-# later version.
-#
-# This program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
-# details.
-#
-# You should have received a copy of the GNU Library General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# Derived in part from the Linux-8086 C library, the GNU C Library, and several
-# other sundry sources.  Files within this library are copyright by their
-# respective copyright holders.
-
-# What arch do you want to compile for...
-#TARGET_ARCH=arm
-TARGET_ARCH=i386
-#TARGET_ARCH=m68k
-#TARGET_ARCH=powerpc
-#TARGET_ARCH=sh
-#TARGET_ARCH=sparc
-
-# If you are running a cross compiler, you may want to set this
-# to something more interesting...
-NATIVE_CC = gcc
-CROSS = #i386-linux-
-CC = $(CROSS)gcc
-AR = $(CROSS)ar
-LD = $(CROSS)ld
-NM = $(CROSS)nm
-STRIPTOOL = $(CROSS)strip
-#STRIPTOOL = /bin/true
-
-# Set the following to `true' to make a debuggable build, and `false' for
-# production builds.
-DODEBUG = false
-
-# Compiler warnings you want to see 
-WARNINGS=-Wall
-
-# Enable support for shared libraries?
-HAVE_SHARED = true
-
-# Note that the kernel source you use to compile with should be the same as the
-# Linux kernel you run your apps on.  uClibc doesn't even try to achieve binary
-# compatibility across kernel versions.  So don't expect, for example, uClibc
-# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x
-# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers,
-# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't
-# work at all.  You have been warned.
-KERNEL_SOURCE=/usr/src/linux
-
-# Set this to `false' if your CPU doesn't have a memory management unit (MMU).
-# Set it to `true' otherwise.
-HAS_MMU = true
-
-# Set this to `false' if you don't have/need basic floating point support
-# support in libc (strtod, printf, scanf).  Set it to `true' otherwise.
-# Note: If not true, Rules.mak disables libm as well.
-HAS_FLOATING_POINT = true
-
-# Set this to `false' if you don't have/need float functions in libm.
-# Set it to `true' otherwise, and make sure HAS_FLOATING_POINT is true as well.
-HAS_LIBM_FLOAT = true
-
-# Set this to `false' if you don't have/need double functions in libm.
-# Set it to `true' otherwise, and make sure HAS_FLOATING_POINT is true as well.
-HAS_LIBM_DOUBLE = true
-
-# Set this to `false' if you don't have/need long double functions in libm.
-# Set it to `true' otherwise, and make sure HAS_FLOATING_POINT is true as well.
-HAS_LIBM_LONG_DOUBLE = false
-
-# Set this to `false' if you don't have/need "(unsigned) long long int" support.
-# Set it to `true' otherwise.
-# Affects *printf and *scanf functions.
-# Also omits strto(u)ll, and (u)lltostr from the library if `false'.
-HAS_LONG_LONG = true
-
-# Set this to `false' if you don't have/need locale support; `true' otherwise.
-# Note: Currently only affects the ctype functions.  You must also generate
-# a locale file for anything but the C locale.  See directory extra/locale for
-# a utility to do so.  Also see the following option.
-HAS_LOCALE = false
-
-# Set this to the path of your uClibc locale file directory.
-# Warning!  This must be different than the glibc locale directory to avoid
-# name conflicts, as the locale files are entirely different in format!
-LOCALE_DIR = "/usr/share/uClibc-locale/"
-
-# This specifies which malloc implementation is used.
-# "malloc-simple" is very, very small, but is also very, very dumb 
-# and does not try to make good use of memory or clean up after itself.
-#
-# "malloc" on the other hand is a bit bigger, but is pretty smart thereby
-# minimizing memory wastage and reusing already allocated memory.  This 
-# can be lots faster and safer IMHO.
-#
-# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc.
-# It is actually smaller than "malloc", at least on i386.  Right now, it
-# only works on i386 (and maybe m68k) because it needs sbrk.
-#MALLOC = malloc-simple
-#MALLOC = malloc 
-MALLOC = malloc-930716
-
-# If you want to collect common syscall code into one function, set to this to
-# `true'.  Set it to false otherwise.
-# On i386 this saves about than 2.8k over all syscalls.
-# The idea came from the implementation in dietlibc.
-# At present, only affects i386.
-UNIFIED_SYSCALL = false
-
-# If you want large file summit support (greater then 2 Gib), 
-# turn this on.  This has no effect unless your kernel supports 
-# lfs.  This currently does nothing, but may someday...
-DOLFS = false
-
-# If you want to include RPC support, enable this.  RPC is almost never used 
-# for anything except NFS support, so unless you plan to use NFS, leave this
-# disabled.  This is off by default.
-INCLUDE_RPC = false
-
-# If you want to compile the library as PIC code, turn this on.
-DOPIC = false
-
-# ROOT_DIR is the base directory which will be compiled into the uClibc 
-# runtime environment.  When compiled as a shared library, the shared
-# library loader will look in <ROOT_DIR>/lib and <ROOT_DIR>/usr/lib
-# for shared libraries.
-#
-# DEVEL_PREFIX is the base directory which will be compiled into the uClibc 
-# development environment.  The uClibc development environment will
-# look for the uClibc header files under <DEVEL_PREFIX><ROOT_DIR>/usr/include,
-# and for static libs and crt0.o in <DEVEL_PREFIX><ROOT_DIR>/usr/lib.
-# Also, 'make install' will install the compiler tools to 
-# <DEVEL_PREFIX><ROOT_DIR>/bin and <DEVEL_PREFIX><ROOT_DIR>/usr/bin.
-#
-# TARGET_PREFIX is the directory under which 'make install' will install the 
-# uClibc runtime environment.   This path does not get compiled into anything,
-# and is provided simply to make it easier to build standalone target systems.
-# Note: This doesn't do anything if there are no shared libs.
-
-DEVEL_PREFIX = 
-ROOT_DIR = /usr/$(TARGET_ARCH)-linux-uclibc
-TARGET_PREFIX =