pull latest kconfig from kernel

1 files changed, 278 insertions, 0 deletions

diff --git a/extra/config/Makefile.kconfig b/extra/config/Makefile.kconfig
new file mode 100644
index 000000000..e67947d53
--- /dev/null
+++ b/extra/config/Makefile.kconfig
@@ -0,0 +1,278 @@
+# ===========================================================================
+# Kernel configuration targets
+# These targets are used from top-level makefile
+
+PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config
+
+xconfig: $(obj)/qconf
+	$< arch/$(ARCH)/Kconfig
+
+gconfig: $(obj)/gconf
+	$< arch/$(ARCH)/Kconfig
+
+menuconfig: $(obj)/mconf
+	$< arch/$(ARCH)/Kconfig
+
+config: $(obj)/conf
+	$< arch/$(ARCH)/Kconfig
+
+oldconfig: $(obj)/conf
+	$< -o arch/$(ARCH)/Kconfig
+
+silentoldconfig: $(obj)/conf
+	$< -s arch/$(ARCH)/Kconfig
+
+update-po-config: $(obj)/kxgettext
+	xgettext --default-domain=linux \
+          --add-comments --keyword=_ --keyword=N_ \
+          --files-from=scripts/kconfig/POTFILES.in \
+          --output scripts/kconfig/config.pot
+	$(Q)ln -fs Kconfig_i386 arch/um/Kconfig_arch
+	$(Q)for i in `ls arch/`; \
+	do \
+	  scripts/kconfig/kxgettext arch/$$i/Kconfig \
+	    | msguniq -o scripts/kconfig/linux_$${i}.pot; \
+	done
+	$(Q)msgcat scripts/kconfig/config.pot \
+	  `find scripts/kconfig/ -type f -name linux_*.pot` \
+	  --output scripts/kconfig/linux_raw.pot
+	$(Q)msguniq --sort-by-file scripts/kconfig/linux_raw.pot \
+	    --output scripts/kconfig/linux.pot
+	$(Q)rm -f arch/um/Kconfig_arch
+	$(Q)rm -f scripts/kconfig/linux_*.pot scripts/kconfig/config.pot
+
+PHONY += randconfig allyesconfig allnoconfig allmodconfig defconfig
+
+randconfig: $(obj)/conf
+	$< -r arch/$(ARCH)/Kconfig
+
+allyesconfig: $(obj)/conf
+	$< -y arch/$(ARCH)/Kconfig
+
+allnoconfig: $(obj)/conf
+	$< -n arch/$(ARCH)/Kconfig
+
+allmodconfig: $(obj)/conf
+	$< -m arch/$(ARCH)/Kconfig
+
+defconfig: $(obj)/conf
+ifeq ($(KBUILD_DEFCONFIG),)
+	$< -d arch/$(ARCH)/Kconfig
+else
+	@echo *** Default configuration is based on '$(KBUILD_DEFCONFIG)'
+	$(Q)$< -D arch/$(ARCH)/configs/$(KBUILD_DEFCONFIG) arch/$(ARCH)/Kconfig
+endif
+
+%_defconfig: $(obj)/conf
+	$(Q)$< -D arch/$(ARCH)/configs/$@ arch/$(ARCH)/Kconfig
+
+# Help text used by make help
+help:
+	@echo  '  config	  - Update current config utilising a line-oriented program'
+	@echo  '  menuconfig	  - Update current config utilising a menu based program'
+	@echo  '  xconfig	  - Update current config utilising a QT based front-end'
+	@echo  '  gconfig	  - Update current config utilising a GTK based front-end'
+	@echo  '  oldconfig	  - Update current config utilising a provided .config as base'
+	@echo  '  silentoldconfig - Same as oldconfig, but quietly'
+	@echo  '  randconfig	  - New config with random answer to all options'
+	@echo  '  defconfig	  - New config with default answer to all options'
+	@echo  '  allmodconfig	  - New config selecting modules when possible'
+	@echo  '  allyesconfig	  - New config where all options are accepted with yes'
+	@echo  '  allnoconfig	  - New config where all options are answered with no'
+
+# lxdialog stuff
+check-lxdialog  := $(srctree)/$(src)/lxdialog/check-lxdialog.sh
+
+# Use reursively expanded variables so we do not call gcc unless
+# we really need to do so. (Do not call gcc as part of make mrproper)
+HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
+HOST_LOADLIBES   = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
+
+HOST_EXTRACFLAGS += -DLOCALE
+
+PHONY += $(obj)/dochecklxdialog
+$(obj)/dochecklxdialog:
+	$(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_LOADLIBES)
+
+always := dochecklxdialog
+
+
+# ===========================================================================
+# Shared Makefile for the various kconfig executables:
+# conf:	  Used for defconfig, oldconfig and related targets
+# mconf:  Used for the mconfig target.
+#         Utilizes the lxdialog package
+# qconf:  Used for the xconfig target
+#         Based on QT which needs to be installed to compile it
+# gconf:  Used for the gconfig target
+#         Based on GTK which needs to be installed to compile it
+# object files used by all kconfig flavours
+
+lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o
+lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o
+
+conf-objs	:= conf.o  zconf.tab.o
+mconf-objs	:= mconf.o zconf.tab.o $(lxdialog)
+kxgettext-objs	:= kxgettext.o zconf.tab.o
+
+hostprogs-y := conf qconf gconf kxgettext
+
+#ifeq ($(MAKECMDGOALS),menuconfig)
+	hostprogs-y += mconf
+#endif
+
+ifeq ($(MAKECMDGOALS),xconfig)
+	qconf-target := 1
+endif
+ifeq ($(MAKECMDGOALS),gconfig)
+	gconf-target := 1
+endif
+
+
+ifeq ($(qconf-target),1)
+qconf-cxxobjs	:= qconf.o
+qconf-objs	:= kconfig_load.o zconf.tab.o
+endif
+
+ifeq ($(gconf-target),1)
+gconf-objs	:= gconf.o kconfig_load.o zconf.tab.o
+endif
+
+clean-files	:= lkc_defs.h qconf.moc .tmp_qtcheck \
+		   .tmp_gtkcheck zconf.tab.c lex.zconf.c zconf.hash.c
+
+# Needed for systems without gettext
+KBUILD_HAVE_NLS := $(shell \
+     if echo "\#include <libintl.h>" | $(HOSTCC) $(HOSTCFLAGS) -E - > /dev/null 2>&1 ; \
+     then echo yes ; \
+     else echo no ; fi)
+ifeq ($(KBUILD_HAVE_NLS),no)
+HOSTCFLAGS	+= -DKBUILD_NO_NLS
+endif
+
+# generated files seem to need this to find local include files
+HOSTCFLAGS_lex.zconf.o	:= -I$(src)
+HOSTCFLAGS_zconf.tab.o	:= -I$(src)
+
+HOSTLOADLIBES_qconf	= $(KC_QT_LIBS) -ldl
+HOSTCXXFLAGS_qconf.o	= $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK
+
+HOSTLOADLIBES_gconf	= `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
+HOSTCFLAGS_gconf.o	= `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
+                          -D LKC_DIRECT_LINK
+
+$(obj)/qconf.o: $(obj)/.tmp_qtcheck
+
+ifeq ($(qconf-target),1)
+$(obj)/.tmp_qtcheck: $(src)/Makefile
+-include $(obj)/.tmp_qtcheck
+
+# QT needs some extra effort...
+$(obj)/.tmp_qtcheck:
+	@set -e; echo "  CHECK   qt"; dir=""; pkg=""; \
+	pkg-config --exists qt 2> /dev/null && pkg=qt; \
+	pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
+	if [ -n "$$pkg" ]; then \
+	  cflags="\$$(shell pkg-config $$pkg --cflags)"; \
+	  libs="\$$(shell pkg-config $$pkg --libs)"; \
+	  moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
+	  dir="$$(pkg-config $$pkg --variable=prefix)"; \
+	else \
+	  for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
+	    if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
+	  done; \
+	  if [ -z "$$dir" ]; then \
+	    echo "*"; \
+	    echo "* Unable to find the QT installation. Please make sure that"; \
+	    echo "* the QT development package is correctly installed and"; \
+	    echo "* either install pkg-config or set the QTDIR environment"; \
+	    echo "* variable to the correct location."; \
+	    echo "*"; \
+	    false; \
+	  fi; \
+	  libpath=$$dir/lib; lib=qt; osdir=""; \
+	  $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
+	    osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
+	  test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
+	  test -f $$libpath/libqt-mt.so && lib=qt-mt; \
+	  cflags="-I$$dir/include"; \
+	  libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
+	  moc="$$dir/bin/moc"; \
+	fi; \
+	if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
+	  echo "*"; \
+	  echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
+	  echo "*"; \
+	  moc="/usr/bin/moc"; \
+	fi; \
+	echo "KC_QT_CFLAGS=$$cflags" > $@; \
+	echo "KC_QT_LIBS=$$libs" >> $@; \
+	echo "KC_QT_MOC=$$moc" >> $@
+endif
+
+$(obj)/gconf.o: $(obj)/.tmp_gtkcheck
+
+ifeq ($(gconf-target),1)
+-include $(obj)/.tmp_gtkcheck
+
+# GTK needs some extra effort, too...
+$(obj)/.tmp_gtkcheck:
+	@if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then		\
+		if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then			\
+			touch $@;								\
+		else									\
+			echo "*"; 							\
+			echo "* GTK+ is present but version >= 2.0.0 is required.";	\
+			echo "*";							\
+			false;								\
+		fi									\
+	else										\
+		echo "*"; 								\
+		echo "* Unable to find the GTK+ installation. Please make sure that"; 	\
+		echo "* the GTK+ 2.0 development package is correctly installed..."; 	\
+		echo "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; 		\
+		echo "*"; 								\
+		false;									\
+	fi
+endif
+
+$(obj)/zconf.tab.o: $(obj)/lex.zconf.c $(obj)/zconf.hash.c
+
+$(obj)/kconfig_load.o: $(obj)/lkc_defs.h
+
+$(obj)/qconf.o: $(obj)/qconf.moc $(obj)/lkc_defs.h
+
+$(obj)/gconf.o: $(obj)/lkc_defs.h
+
+$(obj)/%.moc: $(src)/%.h
+	$(KC_QT_MOC) -i $< -o $@
+
+$(obj)/lkc_defs.h: $(src)/lkc_proto.h
+	sed < $< > $@ 's/P(\([^,]*\),.*/#define \1 (\*\1_p)/'
+
+
+###
+# The following requires flex/bison/gperf
+# By default we use the _shipped versions, uncomment the following line if
+# you are modifying the flex/bison src.
+# LKC_GENPARSER := 1
+
+ifdef LKC_GENPARSER
+
+$(obj)/zconf.tab.c: $(src)/zconf.y
+$(obj)/lex.zconf.c: $(src)/zconf.l
+$(obj)/zconf.hash.c: $(src)/zconf.gperf
+
+%.tab.c: %.y
+	bison -l -b $* -p $(notdir $*) $<
+	cp $@ $@_shipped
+
+lex.%.c: %.l
+	flex -L -P$(notdir $*) -o$@ $<
+	cp $@ $@_shipped
+
+%.hash.c: %.gperf
+	gperf < $< > $@
+	cp $@ $@_shipped
+
+endif