Rework malloc. The new default implementation is based on dlmalloc from Doug

Lea.  It is about 2x faster than the old malloc-930716, and behave itself much
better -- it will properly release memory back to the system, and it uses a
combination of brk() for small allocations and mmap() for larger allocations.
 -Erik

20 files changed, 3155 insertions, 807 deletions

diff --git a/debian/config b/debian/config
index b1c32ab81..487198a72 100644
--- a/debian/config
+++ b/debian/config
@@ -45,7 +45,8 @@ UCLIBC_HAS_THREADS=y
 PTHREADS_DEBUG_SUPPORT=y
 UCLIBC_HAS_LFS=y
 # MALLOC is not set
-MALLOC_930716=y
+# MALLOC_SIMPLE is not set
+MALLOC_STANDARD=y
 MALLOC_GLIBC_COMPAT=y
 UCLIBC_DYNAMIC_ATEXIT=y
 HAS_SHADOW=y
diff --git a/extra/Configs/Config.in b/extra/Configs/Config.in
index 151d60216..8f5eee439 100644
--- a/extra/Configs/Config.in
+++ b/extra/Configs/Config.in
@@ -287,24 +287,36 @@ config UCLIBC_HAS_LFS
 
 choice
 	prompt "Malloc Implementation"
-	default MALLOC_930716
+	default MALLOC if ! UCLIBC_HAS_MMU
+	default MALLOC_STANDARD if UCLIBC_HAS_MMU
 	help
 	  "malloc" use mmap for all allocations and so works very well on MMU-less
 	  systems that do not support the brk() system call.   It is pretty smart
 	  about reusing already allocated memory, and minimizing memory wastage.
+	  This is the default for uClinux MMU-less systems.
 
-	  "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call
-	  for all memory allocations.  This makes it very fast.  It is also pretty
-	  smart about reusing already allocated memory, and minimizing memory wastage.
-	  Because this uses brk() it will not work on uClinux MMU-less systems.
+	  "malloc-simple" was written from scratch for uClibc, and is the
+	  simplest possible (and therefore smallest) malloc implementation.
+	  It is rather dumb, and certainly isn't the fastest.  But it is 100%
+	  standards compliant, thread safe, and very small.
 
-	  If unsure, answer "malloc".
+	  "malloc-standard" is derived from the public domain dlmalloc
+	  implementation by Doug Lea.  It is quite fast, and is pretty smart
+	  about reusing already allocated memory, and minimizing memory
+	  wastage.  This uses brk() for small allocations, while using mmap()
+	  for larger allocations.  This is the default malloc implementation
+	  for uClibc.
+
+	  If unsure, answer "malloc-standard".
 
 config MALLOC
 	bool "malloc"
 
-config MALLOC_930716
-	bool "malloc-930716"
+config MALLOC_SIMPLE
+	bool "malloc-simple"
+
+config MALLOC_STANDARD
+	bool "malloc-standard"
 	depends on UCLIBC_HAS_MMU
 
 endchoice
diff --git a/libc/stdlib/Makefile b/libc/stdlib/Makefile
index a22a8eb0a..878d2bd03 100644
--- a/libc/stdlib/Makefile
+++ b/libc/stdlib/Makefile
@@ -28,8 +28,11 @@ DIRS:=
 ifeq ($(MALLOC),y)
     DIRS+=malloc
 endif
-ifeq ($(MALLOC_930716),y)
-    DIRS+=malloc-930716
+ifeq ($(MALLOC_SIMPLE),y)
+    DIRS+=malloc-simple
+endif
+ifeq ($(MALLOC_STANDARD),y)
+    DIRS+=malloc-standard
 endif
 
 
@@ -83,7 +86,7 @@ CSRC =	abort.c getenv.c mkdtemp.c mktemp.c realpath.c mkstemp.c mkstemp64.c \
 	ptsname.c grantpt.c unlockpt.c gcvt.c drand48-iter.c jrand48.c \
 	jrand48_r.c lrand48.c lrand48_r.c mrand48.c mrand48_r.c nrand48.c \
 	nrand48_r.c rand_r.c srand48.c srand48_r.c seed48.c seed48_r.c \
-	calloc.c valloc.c
+	valloc.c
 ifeq ($(UCLIBC_HAS_FLOATS),y)
 	CSRC += drand48.c drand48_r.c erand48.c erand48_r.c
 endif
diff --git a/libc/stdlib/malloc-930716/README b/libc/stdlib/malloc-930716/README
deleted file mode 100644
index 39c048312..000000000
--- a/libc/stdlib/malloc-930716/README
+++ /dev/null
@@ -1,40 +0,0 @@
-This is a fast malloc implementation that I wrote several years ago.
-I later used it as the basis of GNU malloc.  My version differs from
-the GNU version in that it does not support debugging hooks, and does
-not record statistics.  Therefore it is slightly faster.
-
-In order to safely link programs using this malloc with a C library
-that provides a different malloc, you need to make sure that
-malloc(), free(), and realloc() are defined in a single object file.
-Otherwise when linking you might get a combination of this malloc()
-with the library's free().  The Makefile builds such an object file,
-alloc.o.
-
-If you are using this malloc as the allocator for a C library of your
-own, and are not linking with another C library, then you don't need
-alloc.o.  If you are building a C library, you should also write a
-replacement for the file "morecore.c" that doesn't pollute the name
-space.
-
-The header file "malloc.h" in this directory is NOT intended to be a
-public header file; it is for internal use by malloc and its
-friends.  Don't install malloc.h in a public include directory!
-
-When porting this allocator to a new machine or operating system, you
-should inspect the definition of BLOCKSIZE in malloc.h to make sure
-it is greater than or equal to your target machine's virtual memory
-page size; otherwise valloc() won't work properly.  (If you don't
-care about valloc() then BLOCKSIZE doesn't matter.)
-
-You will also need to provide a machine-dependent _default_morecore()
-function; see morecore.c for a sample version that works on Unix.
-Your morecore function should return a pointer to a newly allocated
-region of the given size, aligned on the most pessimistic alignment
-boundary for the machine.  Subsequent calls to morecore should return
-contiguous memory, and calls to morecore with a negative argument
-should return memory to the system.  If no memory is available
-morecore should return NULL.
-
-Bug reports to Mike Haertel, mike@cs.uoregon.edu.
-This version is dated March 26, 1993; include this
-date with your bug report.
diff --git a/libc/stdlib/malloc-930716/malloc.c b/libc/stdlib/malloc-930716/malloc.c
deleted file mode 100644
index 14047cb02..000000000
--- a/libc/stdlib/malloc-930716/malloc.c
+++ /dev/null
@@ -1,445 +0,0 @@
-/* malloc.c - C standard library routine.
-   Copyright (c) 1989, 1993  Michael J. Haertel
-   You may redistribute this library under the terms of the
-   GNU Library General Public License (version 2 or any later
-   version) as published by the Free Software Foundation.
-   THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED
-   WARRANTY.  IN PARTICULAR, THE AUTHOR MAKES NO REPRESENTATION OR
-   WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS
-   SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE. */
-
-#define _GNU_SOURCE
-#include <features.h>
-#include <limits.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <errno.h>
-#include "malloc.h"
-
-#ifdef __UCLIBC_HAS_THREADS__
-#include <pthread.h>
-pthread_mutex_t __malloclock = PTHREAD_MUTEX_INITIALIZER;
-# define LOCK	__pthread_mutex_lock(&__malloclock)
-# define UNLOCK	__pthread_mutex_unlock(&__malloclock);
-#else
-# define LOCK
-# define UNLOCK
-#endif
-
-
-/* Stuff that is shared across .o files */
-
-/* Pointer to the base of the first block. */
-char *_heapbase;
-/* Block information table. */
-union info *_heapinfo;
-/* Search index in the info table. */
-size_t _heapindex;
-/* Limit of valid info table indices. */
-size_t _heaplimit;
-/* List of blocks allocated with memalign or valloc */
-struct alignlist *_aligned_blocks;
-
-    
-
-/* Stuff that is local to this .o file only */
-
-/* How to really get more memory. */
-static void * __morecore(long size);
-/* Number of info entries. */
-static size_t heapsize;
-/* Count of large blocks allocated for each fragment size. */
-static size_t _fragblocks[BLOCKLOG];
-/* Free lists for each fragment size. */
-static struct list _fraghead[BLOCKLOG];
-/* Are we experienced? */
-static int initialized;
-
-
-/* Aligned allocation.
- * Called within the lock in initialize() and morecore(), 
- * so no explicit locking needed... */
-static void * align(size_t size)
-{
-    void *result;
-    unsigned int adj;
-
-    result = __morecore(size);
-    adj = (unsigned int) ((char *) result - (char *) NULL) % BLOCKSIZE;
-    if (adj != 0) {
-	__morecore(adj = BLOCKSIZE - adj);
-	result = (char *) result + adj;
-    }
-    return result;
-}
-
-/* Set everything up and remember that we have. 
- * Called within the lock in malloc(), so no
- * explicit locking needed... */
-static int initialize(void)
-{
-    heapsize = HEAP / BLOCKSIZE;
-    _heapinfo = align(heapsize * sizeof (union info));
-    if (!_heapinfo) {
-	return 0;
-    }
-    memset(_heapinfo, 0, heapsize * sizeof (union info));
-    _heapinfo[0].free.size = 0;
-    _heapinfo[0].free.next = _heapinfo[0].free.prev = 0;
-    _heapindex = 0;
-    _heapbase = (char *) _heapinfo;
-    initialized = 1;
-    return 1;
-}
-
-/* Get neatly aligned memory, initializing or growing the 
- * heap info table as necessary. 
- * Called within a lock in malloc() and free(), 
- * so no explicit locking needed... */
-static void * morecore(size_t size)
-{
-    void *result;
-    union info *newinfo, *oldinfo;
-    size_t newsize;
-
-    result = align(size);
-    if (!result)
-	return NULL;
-
-    /* Check if we need to grow the info table. */
-    if (BLOCK((char *) result + size) > heapsize) {
-	newsize = heapsize;
-	while (BLOCK((char *) result + size) > newsize)
-	    newsize *= 2;
-	newinfo = align(newsize * sizeof (union info));
-	if (!newinfo) {
-	    __morecore(-size);
-	    return NULL;
-	}
-	memset(newinfo, 0, newsize * sizeof (union info));
-	memcpy(newinfo, _heapinfo, heapsize * sizeof (union info));
-	oldinfo = _heapinfo;
-	newinfo[BLOCK(oldinfo)].busy.type = 0;
-	newinfo[BLOCK(oldinfo)].busy.info.size
-	    = BLOCKIFY(heapsize * sizeof (union info));
-	_heapinfo = newinfo;
-	__free_unlocked(oldinfo);
-	heapsize = newsize;
-    }
-
-    _heaplimit = BLOCK((char *) result + size);
-    return result;
-}
-
-/* Note that morecore has to take a signed argument so
-   that negative values can return memory to the system. */
-static void * __morecore(long size)
-{
-    void *result;
-
-    result = sbrk(size);
-    if (result == (void *) -1)
-	return NULL;
-    return result;
-}
-
-/* Allocate memory from the heap. */
-void * malloc (size_t size)
-{
-    void * ptr;
-    LOCK;
-    ptr = __malloc_unlocked(size);
-    UNLOCK;
-    return(ptr);
-}
-
-void * __malloc_unlocked (size_t size)
-{
-    void *result;
-    size_t log, block, blocks, i, lastblocks, start;
-    struct list *next;
-
-#if defined(__MALLOC_GLIBC_COMPAT__)
-    if (unlikely(size == 0))
-	size++;
-#else
-    /* Some programs will call malloc (0).  Lets be strict and return NULL */
-    if (unlikely(size == 0))
-	return 0;
-#endif
-    /* Check if they are doing something dumb like malloc(-1) */
-    if (unlikely(((unsigned long)size > (unsigned long)(sizeof (struct list)*-2))))
-	goto oom;
-
-    if (unlikely(size < sizeof (struct list)))
-	size = sizeof (struct list);
-
-    if (!initialized && !initialize()) {
-	goto oom;
-    }
-
-    /* Determine the allocation policy based on the request size. */
-    if (size <= BLOCKSIZE / 2) {
-	/* Small allocation to receive a fragment of a block. Determine
-	   the logarithm to base two of the fragment size. */
-	--size;
-	for (log = 1; (size >>= 1) != 0; ++log)
-	    ;
-
-	/* Look in the fragment lists for a free fragment of the
-	   desired size. */
-	if ((next = _fraghead[log].next) != 0) {
-	    /* There are free fragments of this size.  Pop a fragment
-	       out of the fragment list and return it.  Update the block's
-	       nfree and first counters. */
-	    result = next;
-	    next->prev->next = next->next;
-	    if (next->next)
-		next->next->prev = next->prev;
-	    block = BLOCK(result);
-	    if (--_heapinfo[block].busy.info.frag.nfree)
-		_heapinfo[block].busy.info.frag.first
-		    = (unsigned int) ((char *) next->next - (char *) NULL)
-		      % BLOCKSIZE >> log;
-	} else {
-	    /* No free fragments of the desired size, so get a new block
-	       and break it into fragments, returning the first. */
-	    result = __malloc_unlocked(BLOCKSIZE);
-	    if (!result) {
-		goto oom;
-	    }
-	    ++_fragblocks[log];
-
-	    /* Link all fragments but the first into the free list. */
-	    next = (struct list *) ((char *) result + (1 << log));
-	    next->next = 0;
-	    next->prev = &_fraghead[log];
-	    _fraghead[log].next = next;
-
-	    for (i = 2; i < BLOCKSIZE >> log; ++i) {
-		next = (struct list *) ((char *) result + (i << log));
-		next->next = _fraghead[log].next;
-		next->prev = &_fraghead[log];
-		next->prev->next = next;
-		next->next->prev = next;
-	    }
-
-	    /* Initialize the nfree and first counters for this block. */
-	    block = BLOCK(result);
-	    _heapinfo[block].busy.type = log;
-	    _heapinfo[block].busy.info.frag.nfree = i - 1;
-	    _heapinfo[block].busy.info.frag.first = i - 1;
-	}
-    } else {
-	/* Large allocation to receive one or more blocks.  Search
-	   the free list in a circle starting at the last place visited.
-	   If we loop completely around without finding a large enough
-	   space we will have to get more memory from the system. */
-	blocks = BLOCKIFY(size);
-	start = block = _heapindex;
-	while (_heapinfo[block].free.size < blocks) {
-	    block = _heapinfo[block].free.next;
-	    if (block == start) {
-		/* Need to get more from the system.  Check to see if
-		   the new core will be contiguous with the final free
-		   block; if so we don't need to get as much. */
-		block = _heapinfo[0].free.prev;
-		lastblocks = _heapinfo[block].free.size;
-		if (_heaplimit && block + lastblocks == _heaplimit
-		    && __morecore(0) == ADDRESS(block + lastblocks)
-		    && morecore((blocks - lastblocks) * BLOCKSIZE)) {
-		    /* Note that morecore() can change the location of
-		       the final block if it moves the info table and the
-		       old one gets coalesced into the final block. */
-		    block = _heapinfo[0].free.prev;
-		    _heapinfo[block].free.size += blocks - lastblocks;
-		    continue;
-		}
-		result = morecore(blocks * BLOCKSIZE);
-		if (!result) {
-		    goto oom;
-		}
-		block = BLOCK(result);
-		_heapinfo[block].busy.type = 0;
-		_heapinfo[block].busy.info.size = blocks;
-		return result;
-	    }
-	}
-
-	/* At this point we have found a suitable free list entry.
-	   Figure out how to remove what we need from the list. */
-	result = ADDRESS(block);
-	if (_heapinfo[block].free.size > blocks) {
-	    /* The block we found has a bit left over, so relink the
-	       tail end back into the free list. */
-	    _heapinfo[block + blocks].free.size
-		= _heapinfo[block].free.size - blocks;
-	    _heapinfo[block + blocks].free.next
-		= _heapinfo[block].free.next;
-	    _heapinfo[block + blocks].free.prev
-		= _heapinfo[block].free.prev;
-	    _heapinfo[_heapinfo[block].free.prev].free.next
-		= _heapinfo[_heapinfo[block].free.next].free.prev
-		    = _heapindex = block + blocks;
-	} else {
-	    /* The block exactly matches our requirements, so
-	       just remove it from the list. */
-	    _heapinfo[_heapinfo[block].free.next].free.prev
-		= _heapinfo[block].free.prev;
-	    _heapinfo[_heapinfo[block].free.prev].free.next
-		= _heapindex = _heapinfo[block].free.next;
-	}
-
-	_heapinfo[block].busy.type = 0;
-	_heapinfo[block].busy.info.size = blocks;
-    }
-
-    return result;
-
-oom:
-    __set_errno(ENOMEM);
-    return NULL;
-}
-
-/* Return memory to the heap. */
-void free(void *ptr)
-{
-    struct alignlist *l;
-
-    if (ptr == NULL)
-	return;
-
-    LOCK;
-    for (l = _aligned_blocks; l != NULL; l = l->next) {
-	if (l->aligned == ptr) {
-	    /* Mark the block as free */
-	    l->aligned = NULL;
-	    ptr = l->exact;
-	    break;
-	}
-    }
-
-    __free_unlocked(ptr);
-    UNLOCK;
-}
-
-void __free_unlocked(void *ptr)
-{
-    int block, blocks, i, type;
-    struct list *prev, *next;
-
-    if (ptr == NULL)
-	return;
-
-
-    block = BLOCK(ptr);
-
-    switch (type = _heapinfo[block].busy.type) {
-	case 0:
-	    /* Find the free cluster previous to this one in the free list.
-	       Start searching at the last block referenced; this may benefit
-	       programs with locality of allocation. */
-	    i = _heapindex;
-	    if (i > block)
-		while (i > block)
-		    i = _heapinfo[i].free.prev;
-	    else {
-		do
-		    i = _heapinfo[i].free.next;
-		while (i > 0 && i < block);
-		i = _heapinfo[i].free.prev;
-	    }
-
-	    /* Determine how to link this block into the free list. */
-	    if (block == i + _heapinfo[i].free.size) {
-		/* Coalesce this block with its predecessor. */
-		_heapinfo[i].free.size += _heapinfo[block].busy.info.size;
-		block = i;
-	    } else {
-		/* Really link this block back into the free list. */
-		_heapinfo[block].free.size = _heapinfo[block].busy.info.size;
-		_heapinfo[block].free.next = _heapinfo[i].free.next;
-		_heapinfo[block].free.prev = i;
-		_heapinfo[i].free.next = block;
-		_heapinfo[_heapinfo[block].free.next].free.prev = block;
-	    }
-
-	    /* Now that the block is linked in, see if we can coalesce it
-	       with its successor (by deleting its successor from the list
-	       and adding in its size). */
-	    if (block + _heapinfo[block].free.size == _heapinfo[block].free.next) {
-		_heapinfo[block].free.size
-		    += _heapinfo[_heapinfo[block].free.next].free.size;
-		_heapinfo[block].free.next
-		    = _heapinfo[_heapinfo[block].free.next].free.next;
-		_heapinfo[_heapinfo[block].free.next].free.prev = block;
-	    }
-
-	    /* Now see if we can return stuff to the system. */
-	    blocks = _heapinfo[block].free.size;
-	    if (blocks >= FINAL_FREE_BLOCKS && block + blocks == _heaplimit
-		    && __morecore(0) == ADDRESS(block + blocks)) {
-		_heaplimit -= blocks;
-		__morecore(-blocks * BLOCKSIZE);
-		_heapinfo[_heapinfo[block].free.prev].free.next
-		    = _heapinfo[block].free.next;
-		_heapinfo[_heapinfo[block].free.next].free.prev
-		    = _heapinfo[block].free.prev;
-		block = _heapinfo[block].free.prev;
-	    }
-
-	    /* Set the next search to begin at this block. */
-	    _heapindex = block;
-	    break;
-
-	default:
-	    /* Get the address of the first free fragment in this block. */
-	    prev = (struct list *) ((char *) ADDRESS(block)
-		    + (_heapinfo[block].busy.info.frag.first
-			<< type));
-
-	    if (_heapinfo[block].busy.info.frag.nfree == (BLOCKSIZE >> type) - 1
-		    && _fragblocks[type] > 1) {
-		/* If all fragments of this block are free, remove them
-		   from the fragment list and free the whole block. */
-		--_fragblocks[type];
-		for (next = prev, i = 1; i < BLOCKSIZE >> type; ++i)
-		    next = next->next;
-		prev->prev->next = next;
-		if (next)
-		    next->prev = prev->prev;
-		_heapinfo[block].busy.type = 0;
-		_heapinfo[block].busy.info.size = 1;
-		__free_unlocked(ADDRESS(block));
-	    } else if (_heapinfo[block].busy.info.frag.nfree) {
-		/* If some fragments of this block are free, link this fragment
-		   into the fragment list after the first free fragment of
-		   this block. */
-		next = ptr;
-		next->next = prev->next;
-		next->prev = prev;
-		prev->next = next;
-		if (next->next)
-		    next->next->prev = next;
-		++_heapinfo[block].busy.info.frag.nfree;
-	    } else {
-		/* No fragments of this block are free, so link this fragment
-		   into the fragment list and announce that it is the first
-		   free fragment of this block. */
-		prev = (struct list *) ptr;
-		_heapinfo[block].busy.info.frag.nfree = 1;
-		_heapinfo[block].busy.info.frag.first
-		    = (unsigned int) ((char *) ptr - (char *) NULL) % BLOCKSIZE
-		    >> type;
-		prev->next = _fraghead[type].next;
-		prev->prev = &_fraghead[type];
-		prev->prev->next = prev;
-		if (prev->next)
-		    prev->next->prev = prev;
-	    }
-	    break;
-    }
-}
-
diff --git a/libc/stdlib/malloc-930716/malloc.h b/libc/stdlib/malloc-930716/malloc.h
deleted file mode 100644
index bd315f788..000000000
--- a/libc/stdlib/malloc-930716/malloc.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/* malloc.h - declarations for the allocator.
-   Copyright (c) 1989, 1993  Michael J. Haertel
-   You may redistribute this library under the terms of the
-   GNU Library General Public License (version 2 or any later
-   version) as published by the Free Software Foundation.
-   THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED
-   WARRANTY.  IN PARTICULAR, THE AUTHOR MAKES NO REPRESENTATION OR
-   WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS
-   SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE. */
-
-#include <sys/cdefs.h>
-
-
-#define MIN(x,y) ({ \
-	const typeof(x) _x = (x);       \
-	const typeof(y) _y = (y);       \
-	(void) (&_x == &_y);            \
-	_x < _y ? _x : _y; })
-
-
-
-/* The allocator divides the heap into blocks of fixed size; large
-   requests receive one or more whole blocks, and small requests
-   receive a fragment of a block.  Fragment sizes are powers of two,
-   and all fragments of a block are the same size.  When all the
-   fragments in a block have been freed, the block itself is freed.
-   */
-#define INT_BIT (CHAR_BIT * sizeof (size_t))
-#define BLOCKLOG (INT_BIT > 16 ? 12 : 9)
-#define BLOCKSIZE (1 << BLOCKLOG)
-#define BLOCKIFY(SIZE) (((SIZE) + BLOCKSIZE - 1) / BLOCKSIZE)
-
-/* Determine the amount of memory spanned by the initial heap table
-   (not an absolute limit). */
-#define HEAP (INT_BIT > 16 ? 4194304 : 65536)
-
-/* Number of contiguous free blocks allowed to build up at the end of
-   memory before they will be returned to the system. */
-#define FINAL_FREE_BLOCKS 8
-
-/* Data structure giving per-block information. */
-union info {
-    struct {
-	size_t type;		/* Zero for a large block, or positive
-				   giving the logarithm to the base two
-				   of the fragment size. */
-	union {
-	    struct {
-		size_t nfree;	/* Free fragments in a fragmented block. */
-		size_t first;	/* First free fragment of the block. */
-	    } frag;
-	    size_t size;	/* Size (in blocks) of a large cluster. */
-	} info;
-    } busy;
-    struct {
-	size_t size;		/* Size (in blocks) of a free cluster. */
-	size_t next;		/* Index of next free cluster. */
-	size_t prev;		/* Index of previous free cluster. */
-    } free;
-};
-
-/* Address to block number and vice versa. */
-#define BLOCK(A) (((char *) (A) - _heapbase) / BLOCKSIZE + 1)
-#define ADDRESS(B) ((void *) (((B) - 1) * BLOCKSIZE + _heapbase))
-
-/* Doubly linked lists of free fragments. */
-struct list {
-    struct list *next;
-    struct list *prev;
-};
-
-/* List of blocks allocated with memalign or valloc */
-struct alignlist
-{ 
-    struct alignlist *next;
-    __ptr_t aligned;	/* The address that memaligned returned.  */
-    __ptr_t exact;	/* The address that malloc returned.  */
-};
-extern struct alignlist *_aligned_blocks;
-extern char *_heapbase;
-extern union info *_heapinfo;
-extern size_t _heapindex;
-extern size_t _heaplimit;
-
-
-extern void *__malloc_unlocked (size_t size);
-extern void __free_unlocked(void *ptr);
-
-
diff --git a/libc/stdlib/malloc-930716/memalign.c b/libc/stdlib/malloc-930716/memalign.c
deleted file mode 100644
index b89165452..000000000
--- a/libc/stdlib/malloc-930716/memalign.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/* malloc.c - C standard library routine.
-   Copyright (c) 1989, 1993  Michael J. Haertel
-   You may redistribute this library under the terms of the
-   GNU Library General Public License (version 2 or any later
-   version) as published by the Free Software Foundation.
-   THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED
-   WARRANTY.  IN PARTICULAR, THE AUTHOR MAKES NO REPRESENTATION OR
-   WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS
-   SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE. */
-
-#define _GNU_SOURCE
-#include <features.h>
-#include <limits.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include "malloc.h"
-
-#ifdef __UCLIBC_HAS_THREADS__
-#include <pthread.h>
-extern pthread_mutex_t __malloclock;
-# define LOCK	__pthread_mutex_lock(&__malloclock)
-# define UNLOCK	__pthread_mutex_unlock(&__malloclock);
-#else
-# define LOCK
-# define UNLOCK
-#endif
-
-
-__ptr_t memalign (size_t alignment, size_t size)
-{
-    __ptr_t result;
-    unsigned long int adj;
-
-    result = malloc (size + alignment - 1);
-    if (result == NULL)
-	return NULL;
-    adj = (unsigned long int) ((unsigned long int) ((char *) result -
-		(char *) NULL)) % alignment;
-    if (adj != 0)
-    {
-	struct alignlist *l;
-	LOCK;
-	for (l = _aligned_blocks; l != NULL; l = l->next)
-	    if (l->aligned == NULL)
-		/* This slot is free.  Use it.  */
-		break;
-	if (l == NULL)
-	{
-	    l = (struct alignlist *) malloc (sizeof (struct alignlist));
-	    if (l == NULL) {
-		__free_unlocked (result);
-		UNLOCK;
-		return NULL;
-	    }
-	    l->next = _aligned_blocks;
-	    _aligned_blocks = l;
-	}
-	l->exact = result;
-	result = l->aligned = (char *) result + alignment - adj;
-	UNLOCK;
-    }
-
-    return result;
-}
-
diff --git a/libc/stdlib/malloc-930716/realloc.c b/libc/stdlib/malloc-930716/realloc.c
deleted file mode 100644
index 397534a5a..000000000
--- a/libc/stdlib/malloc-930716/realloc.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/* malloc.c - C standard library routine.
-   Copyright (c) 1989, 1993  Michael J. Haertel
-   You may redistribute this library under the terms of the
-   GNU Library General Public License (version 2 or any later
-   version) as published by the Free Software Foundation.
-   THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED
-   WARRANTY.  IN PARTICULAR, THE AUTHOR MAKES NO REPRESENTATION OR
-   WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS
-   SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE. */
-
-#define _GNU_SOURCE
-#include <features.h>
-#include <limits.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <errno.h>
-#include "malloc.h"
-
-#ifdef __UCLIBC_HAS_THREADS__
-#include <pthread.h>
-extern pthread_mutex_t __malloclock;
-# define LOCK	__pthread_mutex_lock(&__malloclock)
-# define UNLOCK	__pthread_mutex_unlock(&__malloclock);
-#else
-# define LOCK
-# define UNLOCK
-#endif
-
-/* Resize the given region to the new size, returning a pointer
-   to the (possibly moved) region.  This is optimized for speed;
-   some benchmarks seem to indicate that greater compactness is
-   achieved by unconditionally allocating and copying to a
-   new region. */
-void * realloc (void *ptr, size_t size)
-{
-    void *result, *previous;
-    size_t block, blocks, type;
-    size_t oldlimit;
-
-    if (!ptr)
-	return malloc(size);
-    if (!size) {
-	LOCK;
-	__free_unlocked(ptr);
-	result = __malloc_unlocked(0);
-	goto alldone;
-    }
-
-    LOCK;
-    block = BLOCK(ptr);
-
-    switch (type = _heapinfo[block].busy.type) {
-	case 0:
-	    /* Maybe reallocate a large block to a small fragment. */
-	    if (size <= BLOCKSIZE / 2) {
-		if ((result = __malloc_unlocked(size)) != NULL) {
-		    memcpy(result, ptr, size);
-		    __free_unlocked(ptr);
-		}
-		goto alldone;
-	    }
-
-	    /* The new size is a large allocation as well; see if
-	       we can hold it in place. */
-	    blocks = BLOCKIFY(size);
-	    if (blocks < _heapinfo[block].busy.info.size) {
-		/* The new size is smaller; return excess memory
-		   to the free list. */
-		_heapinfo[block + blocks].busy.type = 0;
-		_heapinfo[block + blocks].busy.info.size
-		    = _heapinfo[block].busy.info.size - blocks;
-		_heapinfo[block].busy.info.size = blocks;
-		__free_unlocked(ADDRESS(block + blocks));
-		result = ptr;
-		goto alldone;
-	    } else if (blocks == _heapinfo[block].busy.info.size) {
-		/* No size change necessary. */
-		result = ptr;
-		goto alldone;
-	    } else {
-		/* Won't fit, so allocate a new region that will.  Free
-		   the old region first in case there is sufficient adjacent
-		   free space to grow without moving. */
-		blocks = _heapinfo[block].busy.info.size;
-		/* Prevent free from actually returning memory to the system. */
-		oldlimit = _heaplimit;
-		_heaplimit = 0;
-		__free_unlocked(ptr);
-		_heaplimit = oldlimit;
-		result = __malloc_unlocked(size);
-		if (!result) {
-		    /* Now we're really in trouble.  We have to unfree
-		       the thing we just freed.  Unfortunately it might
-		       have been coalesced with its neighbors. */
-		    if (_heapindex == block)
-			__malloc_unlocked(blocks * BLOCKSIZE);
-		    else {
-			previous = __malloc_unlocked((block - _heapindex) * BLOCKSIZE);
-			__malloc_unlocked(blocks * BLOCKSIZE);
-			__free_unlocked(previous);
-		    }	    
-		    goto oom;
-		}
-		if (ptr != result)
-		    memmove(result, ptr, blocks * BLOCKSIZE);
-		goto alldone;
-	    }
-	    break;
-
-	default:
-	    /* Old size is a fragment; type is logarithm to base two of
-	       the fragment size. */
-	    if ((size > 1 << (type - 1)) && (size <= 1 << type)) {
-		/* New size is the same kind of fragment. */
-		result = ptr;
-		goto alldone;
-	    }
-	    else {
-		/* New size is different; allocate a new space, and copy
-		   the lesser of the new size and the old. */
-		result = __malloc_unlocked(size);
-		if (!result) {
-		    goto oom;
-		}
-		memcpy(result, ptr, MIN(size, (size_t)(1 << type)));
-		__free_unlocked(ptr);
-		goto alldone;
-	    }
-	    break;
-    }
-alldone:
-    UNLOCK;
-    return result;
-
-oom:
-    UNLOCK;
-    __set_errno(ENOMEM);
-    return NULL;
-}
-
diff --git a/libc/stdlib/malloc-simple/alloc.c b/libc/stdlib/malloc-simple/alloc.c
index ee0135581..fcac02927 100644
--- a/libc/stdlib/malloc-simple/alloc.c
+++ b/libc/stdlib/malloc-simple/alloc.c
@@ -31,14 +31,14 @@ void *malloc(size_t size)
 
 #ifdef __UCLIBC_HAS_MMU__
     result = mmap((void *) 0, size + sizeof(size_t), PROT_READ | PROT_WRITE,
-	    MAP_PRIVATE | MAP_ANONYMOUS, 0, 0);
+	    MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
     if (result == MAP_FAILED)
 	return 0;
     * (size_t *) result = size;
     return(result + sizeof(size_t));
 #else
     result = mmap((void *) 0, size, PROT_READ | PROT_WRITE,
-	    MAP_SHARED | MAP_ANONYMOUS, 0, 0);
+	    MAP_SHARED | MAP_ANONYMOUS, -1, 0);
     if (result == MAP_FAILED)
 	return 0;
     return(result);
@@ -47,12 +47,27 @@ void *malloc(size_t size)
 #endif
 
 #ifdef L_calloc
-void *calloc(size_t num, size_t size)
+void * calloc(size_t nmemb, size_t lsize)
 {
-    void *ptr = malloc(num * size);
-    if (ptr)
-	memset(ptr, 0, num * size);
-    return ptr;
+	void *result;
+	size_t size=lsize * nmemb;
+
+	/* guard vs integer overflow, but allow nmemb
+	 * to fall through and call malloc(0) */
+	if (nmemb && lsize != (size / nmemb)) {
+		__set_errno(ENOMEM);
+		return NULL;
+	}
+	result=malloc(size);
+#if 0
+	/* Standard unix mmap using /dev/zero clears memory so calloc
+	 * doesn't need to actually zero anything....
+	 */
+	if (result != NULL) {
+		memset(result, 0, size);
+	}
+#endif
+	return result;
 }
 #endif
 
diff --git a/libc/stdlib/malloc-930716/Makefile b/libc/stdlib/malloc-standard/Makefile
index bd52b21e9..2b87c5de2 100644
--- a/libc/stdlib/malloc-930716/Makefile
+++ b/libc/stdlib/malloc-standard/Makefile
@@ -24,9 +24,14 @@
 TOPDIR=../../../
 include $(TOPDIR)Rules.mak
 
-# calloc.c can be found at uClibc/libc/stdlib/calloc.c 
-# valloc.c can be found at uClibc/libc/stdlib/valloc.c 
-CSRC=malloc.c memalign.c realloc.c
+# Turn on malloc debugging if requested
+ifeq ($(UCLIBC_MALLOC_DEBUGGING),y)
+CFLAGS += -D__MALLOC_DEBUGGING
+endif
+
+# calloc.c can be found at uClibc/libc/stdlib/calloc.c
+# valloc.c can be found at uClibc/libc/stdlib/valloc.c
+CSRC=malloc.c calloc.c realloc.c free.c memalign.c mallopt.c mallinfo.c
 COBJS=$(patsubst %.c,%.o, $(CSRC))
 OBJS=$(COBJS)
 
diff --git a/libc/stdlib/malloc-standard/calloc.c b/libc/stdlib/malloc-standard/calloc.c
new file mode 100644
index 000000000..cff0adab8
--- /dev/null
+++ b/libc/stdlib/malloc-standard/calloc.c
@@ -0,0 +1,93 @@
+/*
+  This is a version (aka dlmalloc) of malloc/free/realloc written by
+  Doug Lea and released to the public domain.  Use, modify, and
+  redistribute this code without permission or acknowledgement in any
+  way you wish.  Send questions, comments, complaints, performance
+  data, etc to dl@cs.oswego.edu
+
+  VERSION 2.7.2 Sat Aug 17 09:07:30 2002  Doug Lea  (dl at gee)
+
+  Note: There may be an updated version of this malloc obtainable at
+           ftp://gee.cs.oswego.edu/pub/misc/malloc.c
+  Check before installing!
+
+  Hacked up for uClibc by Erik Andersen <andersen@codepoet.org>
+*/
+
+#include "malloc.h"
+
+
+/* ------------------------------ calloc ------------------------------ */
+void* calloc(size_t n_elements, size_t elem_size)
+{
+    mchunkptr p;
+    unsigned long  clearsize;
+    unsigned long  nclears;
+    size_t size, *d;
+    void* mem;
+
+
+    /* guard vs integer overflow, but allow nmemb
+     * to fall through and call malloc(0) */
+    size=lsize * nmemb;
+    if (n_elements && elem_size != (size / n_elements)) {
+	__set_errno(ENOMEM);
+	return NULL;
+    }
+
+    LOCK;
+    mem = malloc(size);
+    if (mem != 0) {
+	p = mem2chunk(mem);
+
+	if (!chunk_is_mmapped(p))
+	{
+	    /*
+	       Unroll clear of <= 36 bytes (72 if 8byte sizes)
+	       We know that contents have an odd number of
+	       size_t-sized words; minimally 3.
+	       */
+
+	    d = (size_t*)mem;
+	    clearsize = chunksize(p) - (sizeof(size_t));
+	    nclears = clearsize / sizeof(size_t);
+	    assert(nclears >= 3);
+
+	    if (nclears > 9)
+		memset(d, 0, clearsize);
+
+	    else {
+		*(d+0) = 0;
+		*(d+1) = 0;
+		*(d+2) = 0;
+		if (nclears > 4) {
+		    *(d+3) = 0;
+		    *(d+4) = 0;
+		    if (nclears > 6) {
+			*(d+5) = 0;
+			*(d+6) = 0;
+			if (nclears > 8) {
+			    *(d+7) = 0;
+			    *(d+8) = 0;
+			}
+		    }
+		}
+	    }
+	}
+#if 0
+	else
+	{
+	/* Standard unix mmap using /dev/zero clears memory so calloc
+	 * doesn't need to actually zero anything....
+	 */
+	    d = (size_t*)mem;
+	    /* Note the additional (sizeof(size_t)) */
+	    clearsize = chunksize(p) - 2*(sizeof(size_t));
+	    memset(d, 0, clearsize);
+	}
+#endif
+    }
+    UNLOCK;
+    return mem;
+}
+
diff --git a/libc/stdlib/malloc-standard/free.c b/libc/stdlib/malloc-standard/free.c
new file mode 100644
index 000000000..4277767fa
--- /dev/null
+++ b/libc/stdlib/malloc-standard/free.c
@@ -0,0 +1,382 @@
+/*
+  This is a version (aka dlmalloc) of malloc/free/realloc written by
+  Doug Lea and released to the public domain.  Use, modify, and
+  redistribute this code without permission or acknowledgement in any
+  way you wish.  Send questions, comments, complaints, performance
+  data, etc to dl@cs.oswego.edu
+
+  VERSION 2.7.2 Sat Aug 17 09:07:30 2002  Doug Lea  (dl at gee)
+
+  Note: There may be an updated version of this malloc obtainable at
+           ftp://gee.cs.oswego.edu/pub/misc/malloc.c
+  Check before installing!
+
+  Hacked up for uClibc by Erik Andersen <andersen@codepoet.org>
+*/
+
+#include "malloc.h"
+
+
+/* ------------------------- __malloc_trim -------------------------
+   __malloc_trim is an inverse of sorts to __malloc_alloc.  It gives memory
+   back to the system (via negative arguments to sbrk) if there is unused
+   memory at the `high' end of the malloc pool. It is called automatically by
+   free() when top space exceeds the trim threshold. It is also called by the
+   public malloc_trim routine.  It returns 1 if it actually released any
+   memory, else 0.
+*/
+static int __malloc_trim(size_t pad, mstate av)
+{
+    long  top_size;        /* Amount of top-most memory */
+    long  extra;           /* Amount to release */
+    long  released;        /* Amount actually released */
+    char* current_brk;     /* address returned by pre-check sbrk call */
+    char* new_brk;         /* address returned by post-check sbrk call */
+    size_t pagesz;
+
+    pagesz = av->pagesize;
+    top_size = chunksize(av->top);
+
+    /* Release in pagesize units, keeping at least one page */
+    extra = ((top_size - pad - MINSIZE + (pagesz-1)) / pagesz - 1) * pagesz;
+
+    if (extra > 0) {
+
+	/*
+	   Only proceed if end of memory is where we last set it.
+	   This avoids problems if there were foreign sbrk calls.
+	   */
+	current_brk = (char*)(MORECORE(0));
+	if (current_brk == (char*)(av->top) + top_size) {
+
+	    /*
+	       Attempt to release memory. We ignore MORECORE return value,
+	       and instead call again to find out where new end of memory is.
+	       This avoids problems if first call releases less than we asked,
+	       of if failure somehow altered brk value. (We could still
+	       encounter problems if it altered brk in some very bad way,
+	       but the only thing we can do is adjust anyway, which will cause
+	       some downstream failure.)
+	       */
+
+	    MORECORE(-extra);
+	    new_brk = (char*)(MORECORE(0));
+
+	    if (new_brk != (char*)MORECORE_FAILURE) {
+		released = (long)(current_brk - new_brk);
+
+		if (released != 0) {
+		    /* Success. Adjust top. */
+		    av->sbrked_mem -= released;
+		    set_head(av->top, (top_size - released) | PREV_INUSE);
+		    check_malloc_state();
+		    return 1;
+		}
+	    }
+	}
+    }
+    return 0;
+}
+
+/*
+  Initialize a malloc_state struct.
+
+  This is called only from within __malloc_consolidate, which needs
+  be called in the same contexts anyway.  It is never called directly
+  outside of __malloc_consolidate because some optimizing compilers try
+  to inline it at all call points, which turns out not to be an
+  optimization at all. (Inlining it in __malloc_consolidate is fine though.)
+*/
+static void malloc_init_state(mstate av)
+{
+    int     i;
+    mbinptr bin;
+
+    /* Establish circular links for normal bins */
+    for (i = 1; i < NBINS; ++i) {
+	bin = bin_at(av,i);
+	bin->fd = bin->bk = bin;
+    }
+
+    av->top_pad        = DEFAULT_TOP_PAD;
+    av->n_mmaps_max    = DEFAULT_MMAP_MAX;
+    av->mmap_threshold = DEFAULT_MMAP_THRESHOLD;
+    av->trim_threshold = DEFAULT_TRIM_THRESHOLD;
+
+#if MORECORE_CONTIGUOUS
+    set_contiguous(av);
+#else
+    set_noncontiguous(av);
+#endif
+
+
+    set_max_fast(av, DEFAULT_MXFAST);
+
+    av->top            = initial_top(av);
+    av->pagesize       = malloc_getpagesize;
+}
+
+
+/* ----------------------------------------------------------------------
+ *
+ * PUBLIC STUFF
+ *
+ * ----------------------------------------------------------------------*/
+
+
+/* ------------------------- __malloc_consolidate -------------------------
+
+  __malloc_consolidate is a specialized version of free() that tears
+  down chunks held in fastbins.  Free itself cannot be used for this
+  purpose since, among other things, it might place chunks back onto
+  fastbins.  So, instead, we need to use a minor variant of the same
+  code.
+
+  Also, because this routine needs to be called the first time through
+  malloc anyway, it turns out to be the perfect place to trigger
+  initialization code.
+*/
+void __malloc_consolidate(mstate av)
+{
+    mfastbinptr*    fb;                 /* current fastbin being consolidated */
+    mfastbinptr*    maxfb;              /* last fastbin (for loop control) */
+    mchunkptr       p;                  /* current chunk being consolidated */
+    mchunkptr       nextp;              /* next chunk to consolidate */
+    mchunkptr       unsorted_bin;       /* bin header */
+    mchunkptr       first_unsorted;     /* chunk to link to */
+
+    /* These have same use as in free() */
+    mchunkptr       nextchunk;
+    size_t size;
+    size_t nextsize;
+    size_t prevsize;
+    int             nextinuse;
+    mchunkptr       bck;
+    mchunkptr       fwd;
+
+    /*
+       If max_fast is 0, we know that av hasn't
+       yet been initialized, in which case do so below
+       */
+
+    if (av->max_fast != 0) {
+	clear_fastchunks(av);
+
+	unsorted_bin = unsorted_chunks(av);
+
+	/*
+	   Remove each chunk from fast bin and consolidate it, placing it
+	   then in unsorted bin. Among other reasons for doing this,
+	   placing in unsorted bin avoids needing to calculate actual bins
+	   until malloc is sure that chunks aren't immediately going to be
+	   reused anyway.
+	   */
+
+	maxfb = &(av->fastbins[fastbin_index(av->max_fast)]);
+	fb = &(av->fastbins[0]);
+	do {
+	    if ( (p = *fb) != 0) {
+		*fb = 0;
+
+		do {
+		    check_inuse_chunk(p);
+		    nextp = p->fd;
+
+		    /* Slightly streamlined version of consolidation code in free() */
+		    size = p->size & ~PREV_INUSE;
+		    nextchunk = chunk_at_offset(p, size);
+		    nextsize = chunksize(nextchunk);
+
+		    if (!prev_inuse(p)) {
+			prevsize = p->prev_size;
+			size += prevsize;
+			p = chunk_at_offset(p, -((long) prevsize));
+			unlink(p, bck, fwd);
+		    }
+
+		    if (nextchunk != av->top) {
+			nextinuse = inuse_bit_at_offset(nextchunk, nextsize);
+			set_head(nextchunk, nextsize);
+
+			if (!nextinuse) {
+			    size += nextsize;
+			    unlink(nextchunk, bck, fwd);
+			}
+
+			first_unsorted = unsorted_bin->fd;
+			unsorted_bin->fd = p;
+			first_unsorted->bk = p;
+
+			set_head(p, size | PREV_INUSE);
+			p->bk = unsorted_bin;
+			p->fd = first_unsorted;
+			set_foot(p, size);
+		    }
+
+		    else {
+			size += nextsize;
+			set_head(p, size | PREV_INUSE);
+			av->top = p;
+		    }
+
+		} while ( (p = nextp) != 0);
+
+	    }
+	} while (fb++ != maxfb);
+    }
+    else {
+	malloc_init_state(av);
+	check_malloc_state();
+    }
+}
+
+
+/* ------------------------------ free ------------------------------ */
+void free(void* mem)
+{
+    mstate av;
+
+    mchunkptr       p;           /* chunk corresponding to mem */
+    size_t size;        /* its size */
+    mfastbinptr*    fb;          /* associated fastbin */
+    mchunkptr       nextchunk;   /* next contiguous chunk */
+    size_t nextsize;    /* its size */
+    int             nextinuse;   /* true if nextchunk is used */
+    size_t prevsize;    /* size of previous contiguous chunk */
+    mchunkptr       bck;         /* misc temp for linking */
+    mchunkptr       fwd;         /* misc temp for linking */
+
+    /* free(0) has no effect */
+    if (mem == NULL)
+	return;
+
+    LOCK;
+    av = get_malloc_state();
+    p = mem2chunk(mem);
+    size = chunksize(p);
+
+    check_inuse_chunk(p);
+
+    /*
+       If eligible, place chunk on a fastbin so it can be found
+       and used quickly in malloc.
+       */
+
+    if ((unsigned long)(size) <= (unsigned long)(av->max_fast)
+
+#if TRIM_FASTBINS
+	    /* If TRIM_FASTBINS set, don't place chunks
+	       bordering top into fastbins */
+	    && (chunk_at_offset(p, size) != av->top)
+#endif
+       ) {
+
+	set_fastchunks(av);
+	fb = &(av->fastbins[fastbin_index(size)]);
+	p->fd = *fb;
+	*fb = p;
+    }
+
+    /*
+       Consolidate other non-mmapped chunks as they arrive.
+       */
+
+    else if (!chunk_is_mmapped(p)) {
+	set_anychunks(av);
+
+	nextchunk = chunk_at_offset(p, size);
+	nextsize = chunksize(nextchunk);
+
+	/* consolidate backward */
+	if (!prev_inuse(p)) {
+	    prevsize = p->prev_size;
+	    size += prevsize;
+	    p = chunk_at_offset(p, -((long) prevsize));
+	    unlink(p, bck, fwd);
+	}
+
+	if (nextchunk != av->top) {
+	    /* get and clear inuse bit */
+	    nextinuse = inuse_bit_at_offset(nextchunk, nextsize);
+	    set_head(nextchunk, nextsize);
+
+	    /* consolidate forward */
+	    if (!nextinuse) {
+		unlink(nextchunk, bck, fwd);
+		size += nextsize;
+	    }
+
+	    /*
+	       Place the chunk in unsorted chunk list. Chunks are
+	       not placed into regular bins until after they have
+	       been given one chance to be used in malloc.
+	       */
+
+	    bck = unsorted_chunks(av);
+	    fwd = bck->fd;
+	    p->bk = bck;
+	    p->fd = fwd;
+	    bck->fd = p;
+	    fwd->bk = p;
+
+	    set_head(p, size | PREV_INUSE);
+	    set_foot(p, size);
+
+	    check_free_chunk(p);
+	}
+
+	/*
+	   If the chunk borders the current high end of memory,
+	   consolidate into top
+	   */
+
+	else {
+	    size += nextsize;
+	    set_head(p, size | PREV_INUSE);
+	    av->top = p;
+	    check_chunk(p);
+	}
+
+	/*
+	   If freeing a large space, consolidate possibly-surrounding
+	   chunks. Then, if the total unused topmost memory exceeds trim
+	   threshold, ask malloc_trim to reduce top.
+
+	   Unless max_fast is 0, we don't know if there are fastbins
+	   bordering top, so we cannot tell for sure whether threshold
+	   has been reached unless fastbins are consolidated.  But we
+	   don't want to consolidate on each free.  As a compromise,
+	   consolidation is performed if FASTBIN_CONSOLIDATION_THRESHOLD
+	   is reached.
+	   */
+
+	if ((unsigned long)(size) >= FASTBIN_CONSOLIDATION_THRESHOLD) {
+	    if (have_fastchunks(av))
+		__malloc_consolidate(av);
+
+	    if ((unsigned long)(chunksize(av->top)) >=
+		    (unsigned long)(av->trim_threshold))
+		__malloc_trim(av->top_pad, av);
+	}
+
+    }
+    /*
+       If the chunk was allocated via mmap, release via munmap()
+       Note that if HAVE_MMAP is false but chunk_is_mmapped is
+       true, then user must have overwritten memory. There's nothing
+       we can do to catch this error unless DEBUG is set, in which case
+       check_inuse_chunk (above) will have triggered error.
+       */
+
+    else {
+	int ret;
+	size_t offset = p->prev_size;
+	av->n_mmaps--;
+	av->mmapped_mem -= (size + offset);
+	ret = munmap((char*)p - offset, size + offset);
+	/* munmap returns non-zero on failure */
+	assert(ret == 0);
+    }
+    UNLOCK;
+}
+
diff --git a/libc/stdlib/malloc-standard/mallinfo.c b/libc/stdlib/malloc-standard/mallinfo.c
new file mode 100644
index 000000000..89d6b68e1
--- /dev/null
+++ b/libc/stdlib/malloc-standard/mallinfo.c
@@ -0,0 +1,81 @@
+/*
+  This is a version (aka dlmalloc) of malloc/free/realloc written by
+  Doug Lea and released to the public domain.  Use, modify, and
+  redistribute this code without permission or acknowledgement in any
+  way you wish.  Send questions, comments, complaints, performance
+  data, etc to dl@cs.oswego.edu
+
+  VERSION 2.7.2 Sat Aug 17 09:07:30 2002  Doug Lea  (dl at gee)
+
+  Note: There may be an updated version of this malloc obtainable at
+           ftp://gee.cs.oswego.edu/pub/misc/malloc.c
+  Check before installing!
+
+  Hacked up for uClibc by Erik Andersen <andersen@codepoet.org>
+*/
+
+#include "malloc.h"
+
+
+/* ------------------------------ mallinfo ------------------------------ */
+struct mallinfo mallinfo(void)
+{
+    mstate av;
+    struct mallinfo mi;
+    int i;
+    mbinptr b;
+    mchunkptr p;
+    size_t avail;
+    size_t fastavail;
+    int nblocks;
+    int nfastblocks;
+
+    LOCK;
+    av = get_malloc_state();
+    /* Ensure initialization */
+    if (av->top == 0)  {
+	__malloc_consolidate(av);
+    }
+
+    check_malloc_state();
+
+    /* Account for top */
+    avail = chunksize(av->top);
+    nblocks = 1;  /* top always exists */
+
+    /* traverse fastbins */
+    nfastblocks = 0;
+    fastavail = 0;
+
+    for (i = 0; i < NFASTBINS; ++i) {
+	for (p = av->fastbins[i]; p != 0; p = p->fd) {
+	    ++nfastblocks;
+	    fastavail += chunksize(p);
+	}
+    }
+
+    avail += fastavail;
+
+    /* traverse regular bins */
+    for (i = 1; i < NBINS; ++i) {
+	b = bin_at(av, i);
+	for (p = last(b); p != b; p = p->bk) {
+	    ++nblocks;
+	    avail += chunksize(p);
+	}
+    }
+
+    mi.smblks = nfastblocks;
+    mi.ordblks = nblocks;
+    mi.fordblks = avail;
+    mi.uordblks = av->sbrked_mem - avail;
+    mi.arena = av->sbrked_mem;
+    mi.hblks = av->n_mmaps;
+    mi.hblkhd = av->mmapped_mem;
+    mi.fsmblks = fastavail;
+    mi.keepcost = chunksize(av->top);
+    mi.usmblks = av->max_total_mem;
+    UNLOCK;
+    return mi;
+}
+
diff --git a/libc/stdlib/malloc-standard/malloc.c b/libc/stdlib/malloc-standard/malloc.c
new file mode 100644
index 000000000..8d132a43e
--- /dev/null
+++ b/libc/stdlib/malloc-standard/malloc.c
@@ -0,0 +1,1160 @@
+/*
+  This is a version (aka dlmalloc) of malloc/free/realloc written by
+  Doug Lea and released to the public domain.  Use, modify, and
+  redistribute this code without permission or acknowledgement in any
+  way you wish.  Send questions, comments, complaints, performance
+  data, etc to dl@cs.oswego.edu
+
+  VERSION 2.7.2 Sat Aug 17 09:07:30 2002  Doug Lea  (dl at gee)
+
+  Note: There may be an updated version of this malloc obtainable at
+           ftp://gee.cs.oswego.edu/pub/misc/malloc.c
+  Check before installing!
+
+  Hacked up for uClibc by Erik Andersen <andersen@codepoet.org>
+*/
+
+#define _GNU_SOURCE
+#include "malloc.h"
+
+
+#ifdef __UCLIBC_HAS_THREADS__
+pthread_mutex_t __malloc_lock = PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP;
+#endif
+
+/*
+   There is exactly one instance of this struct in this malloc.
+   If you are adapting this malloc in a way that does NOT use a static
+   malloc_state, you MUST explicitly zero-fill it before using. This
+   malloc relies on the property that malloc_state is initialized to
+   all zeroes (as is true of C statics).
+*/
+struct malloc_state __malloc_state;  /* never directly referenced */
+
+/* forward declaration */
+static int __malloc_largebin_index(unsigned int sz);
+
+#ifdef __MALLOC_DEBUGGING
+
+/*
+  Debugging support
+
+  Because freed chunks may be overwritten with bookkeeping fields, this
+  malloc will often die when freed memory is overwritten by user
+  programs.  This can be very effective (albeit in an annoying way)
+  in helping track down dangling pointers.
+
+  If you compile with -D__MALLOC_DEBUGGING, a number of assertion checks are
+  enabled that will catch more memory errors. You probably won't be
+  able to make much sense of the actual assertion errors, but they
+  should help you locate incorrectly overwritten memory.  The
+  checking is fairly extensive, and will slow down execution
+  noticeably. Calling malloc_stats or mallinfo with __MALLOC_DEBUGGING set will
+  attempt to check every non-mmapped allocated and free chunk in the
+  course of computing the summmaries. (By nature, mmapped regions
+  cannot be checked very much automatically.)
+
+  Setting __MALLOC_DEBUGGING may also be helpful if you are trying to modify
+  this code. The assertions in the check routines spell out in more
+  detail the assumptions and invariants underlying the algorithms.
+
+  Setting __MALLOC_DEBUGGING does NOT provide an automated mechanism for checking
+  that all accesses to malloced memory stay within their
+  bounds. However, there are several add-ons and adaptations of this
+  or other mallocs available that do this.
+*/
+
+/* Properties of all chunks */
+void __do_check_chunk(mchunkptr p)
+{
+    mstate av = get_malloc_state();
+#ifdef __DOASSERTS__
+    /* min and max possible addresses assuming contiguous allocation */
+    char* max_address = (char*)(av->top) + chunksize(av->top);
+    char* min_address = max_address - av->sbrked_mem;
+    unsigned long  sz = chunksize(p);
+#endif
+
+    if (!chunk_is_mmapped(p)) {
+
+	/* Has legal address ... */
+	if (p != av->top) {
+	    if (contiguous(av)) {
+		assert(((char*)p) >= min_address);
+		assert(((char*)p + sz) <= ((char*)(av->top)));
+	    }
+	}
+	else {
+	    /* top size is always at least MINSIZE */
+	    assert((unsigned long)(sz) >= MINSIZE);
+	    /* top predecessor always marked inuse */
+	    assert(prev_inuse(p));
+	}
+
+    }
+    else {
+	/* address is outside main heap  */
+	if (contiguous(av) && av->top != initial_top(av)) {
+	    assert(((char*)p) < min_address || ((char*)p) > max_address);
+	}
+	/* chunk is page-aligned */
+	assert(((p->prev_size + sz) & (av->pagesize-1)) == 0);
+	/* mem is aligned */
+	assert(aligned_OK(chunk2mem(p)));
+    }
+}
+
+/* Properties of free chunks */
+void __do_check_free_chunk(mchunkptr p)
+{
+    size_t sz = p->size & ~PREV_INUSE;
+#ifdef __DOASSERTS__
+    mstate av = get_malloc_state();
+    mchunkptr next = chunk_at_offset(p, sz);
+#endif
+
+    __do_check_chunk(p);
+
+    /* Chunk must claim to be free ... */
+    assert(!inuse(p));
+    assert (!chunk_is_mmapped(p));
+
+    /* Unless a special marker, must have OK fields */
+    if ((unsigned long)(sz) >= MINSIZE)
+    {
+	assert((sz & MALLOC_ALIGN_MASK) == 0);
+	assert(aligned_OK(chunk2mem(p)));
+	/* ... matching footer field */
+	assert(next->prev_size == sz);
+	/* ... and is fully consolidated */
+	assert(prev_inuse(p));
+	assert (next == av->top || inuse(next));
+
+	/* ... and has minimally sane links */
+	assert(p->fd->bk == p);
+	assert(p->bk->fd == p);
+    }
+    else /* markers are always of size (sizeof(size_t)) */
+	assert(sz == (sizeof(size_t)));
+}
+
+/* Properties of inuse chunks */
+void __do_check_inuse_chunk(mchunkptr p)
+{
+    mstate av = get_malloc_state();
+    mchunkptr next;
+    __do_check_chunk(p);
+
+    if (chunk_is_mmapped(p))
+	return; /* mmapped chunks have no next/prev */
+
+    /* Check whether it claims to be in use ... */
+    assert(inuse(p));
+
+    next = next_chunk(p);
+
+    /* ... and is surrounded by OK chunks.
+       Since more things can be checked with free chunks than inuse ones,
+       if an inuse chunk borders them and debug is on, it's worth doing them.
+       */
+    if (!prev_inuse(p))  {
+	/* Note that we cannot even look at prev unless it is not inuse */
+	mchunkptr prv = prev_chunk(p);
+	assert(next_chunk(prv) == p);
+	__do_check_free_chunk(prv);
+    }
+
+    if (next == av->top) {
+	assert(prev_inuse(next));
+	assert(chunksize(next) >= MINSIZE);
+    }
+    else if (!inuse(next))
+	__do_check_free_chunk(next);
+}
+
+/* Properties of chunks recycled from fastbins */
+void __do_check_remalloced_chunk(mchunkptr p, size_t s)
+{
+#ifdef __DOASSERTS__
+    size_t sz = p->size & ~PREV_INUSE;
+#endif
+
+    __do_check_inuse_chunk(p);
+
+    /* Legal size ... */
+    assert((sz & MALLOC_ALIGN_MASK) == 0);
+    assert((unsigned long)(sz) >= MINSIZE);
+    /* ... and alignment */
+    assert(aligned_OK(chunk2mem(p)));
+    /* chunk is less than MINSIZE more than request */
+    assert((long)(sz) - (long)(s) >= 0);
+    assert((long)(sz) - (long)(s + MINSIZE) < 0);
+}
+
+/* Properties of nonrecycled chunks at the point they are malloced */
+void __do_check_malloced_chunk(mchunkptr p, size_t s)
+{
+    /* same as recycled case ... */
+    __do_check_remalloced_chunk(p, s);
+
+    /*
+       ... plus,  must obey implementation invariant that prev_inuse is
+       always true of any allocated chunk; i.e., that each allocated
+       chunk borders either a previously allocated and still in-use
+       chunk, or the base of its memory arena. This is ensured
+       by making all allocations from the the `lowest' part of any found
+       chunk.  This does not necessarily hold however for chunks
+       recycled via fastbins.
+       */
+
+    assert(prev_inuse(p));
+}
+
+
+/*
+  Properties of malloc_state.
+
+  This may be useful for debugging malloc, as well as detecting user
+  programmer errors that somehow write into malloc_state.
+
+  If you are extending or experimenting with this malloc, you can
+  probably figure out how to hack this routine to print out or
+  display chunk addresses, sizes, bins, and other instrumentation.
+*/
+void __do_check_malloc_state(void)
+{
+    mstate av = get_malloc_state();
+    int i;
+    mchunkptr p;
+    mchunkptr q;
+    mbinptr b;
+    unsigned int binbit;
+    int empty;
+    unsigned int idx;
+    size_t size;
+    unsigned long  total = 0;
+    int max_fast_bin;
+
+    /* internal size_t must be no wider than pointer type */
+    assert(sizeof(size_t) <= sizeof(char*));
+
+    /* alignment is a power of 2 */
+    assert((MALLOC_ALIGNMENT & (MALLOC_ALIGNMENT-1)) == 0);
+
+    /* cannot run remaining checks until fully initialized */
+    if (av->top == 0 || av->top == initial_top(av))
+	return;
+
+    /* pagesize is a power of 2 */
+    assert((av->pagesize & (av->pagesize-1)) == 0);
+
+    /* properties of fastbins */
+
+    /* max_fast is in allowed range */
+    assert(get_max_fast(av) <= request2size(MAX_FAST_SIZE));
+
+    max_fast_bin = fastbin_index(av->max_fast);
+
+    for (i = 0; i < NFASTBINS; ++i) {
+	p = av->fastbins[i];
+
+	/* all bins past max_fast are empty */
+	if (i > max_fast_bin)
+	    assert(p == 0);
+
+	while (p != 0) {
+	    /* each chunk claims to be inuse */
+	    __do_check_inuse_chunk(p);
+	    total += chunksize(p);
+	    /* chunk belongs in this bin */
+	    assert(fastbin_index(chunksize(p)) == i);
+	    p = p->fd;
+	}
+    }
+
+    if (total != 0)
+	assert(have_fastchunks(av));
+    else if (!have_fastchunks(av))
+	assert(total == 0);
+
+    /* check normal bins */
+    for (i = 1; i < NBINS; ++i) {
+	b = bin_at(av,i);
+
+	/* binmap is accurate (except for bin 1 == unsorted_chunks) */
+	if (i >= 2) {
+	    binbit = get_binmap(av,i);
+	    empty = last(b) == b;
+	    if (!binbit)
+		assert(empty);
+	    else if (!empty)
+		assert(binbit);
+	}
+
+	for (p = last(b); p != b; p = p->bk) {
+	    /* each chunk claims to be free */
+	    __do_check_free_chunk(p);
+	    size = chunksize(p);
+	    total += size;
+	    if (i >= 2) {
+		/* chunk belongs in bin */
+		idx = bin_index(size);
+		assert(idx == i);
+		/* lists are sorted */
+		if ((unsigned long) size >= (unsigned long)(FIRST_SORTED_BIN_SIZE)) {
+		    assert(p->bk == b ||
+			    (unsigned long)chunksize(p->bk) >=
+			    (unsigned long)chunksize(p));
+		}
+	    }
+	    /* chunk is followed by a legal chain of inuse chunks */
+	    for (q = next_chunk(p);
+		    (q != av->top && inuse(q) &&
+		     (unsigned long)(chunksize(q)) >= MINSIZE);
+		    q = next_chunk(q))
+		__do_check_inuse_chunk(q);
+	}
+    }
+
+    /* top chunk is OK */
+    __do_check_chunk(av->top);
+
+    /* sanity checks for statistics */
+
+    assert(total <= (unsigned long)(av->max_total_mem));
+    assert(av->n_mmaps >= 0);
+    assert(av->n_mmaps <= av->max_n_mmaps);
+
+    assert((unsigned long)(av->sbrked_mem) <=
+	    (unsigned long)(av->max_sbrked_mem));
+
+    assert((unsigned long)(av->mmapped_mem) <=
+	    (unsigned long)(av->max_mmapped_mem));
+
+    assert((unsigned long)(av->max_total_mem) >=
+	    (unsigned long)(av->mmapped_mem) + (unsigned long)(av->sbrked_mem));
+}
+#endif
+
+
+/* ----------- Routines dealing with system allocation -------------- */
+
+/*
+  sysmalloc handles malloc cases requiring more memory from the system.
+  On entry, it is assumed that av->top does not have enough
+  space to service request for nb bytes, thus requiring that av->top
+  be extended or replaced.
+*/
+static void* __malloc_alloc(size_t nb, mstate av)
+{
+    mchunkptr       old_top;        /* incoming value of av->top */
+    size_t old_size;       /* its size */
+    char*           old_end;        /* its end address */
+
+    long            size;           /* arg to first MORECORE or mmap call */
+    char*           brk;            /* return value from MORECORE */
+
+    long            correction;     /* arg to 2nd MORECORE call */
+    char*           snd_brk;        /* 2nd return val */
+
+    size_t front_misalign; /* unusable bytes at front of new space */
+    size_t end_misalign;   /* partial page left at end of new space */
+    char*           aligned_brk;    /* aligned offset into brk */
+
+    mchunkptr       p;              /* the allocated/returned chunk */
+    mchunkptr       remainder;      /* remainder from allocation */
+    unsigned long    remainder_size; /* its size */
+
+    unsigned long    sum;            /* for updating stats */
+
+    size_t          pagemask  = av->pagesize - 1;
+
+    /*
+       If there is space available in fastbins, consolidate and retry
+       malloc from scratch rather than getting memory from system.  This
+       can occur only if nb is in smallbin range so we didn't consolidate
+       upon entry to malloc. It is much easier to handle this case here
+       than in malloc proper.
+       */
+
+    if (have_fastchunks(av)) {
+	assert(in_smallbin_range(nb));
+	__malloc_consolidate(av);
+	return malloc(nb - MALLOC_ALIGN_MASK);
+    }
+
+
+    /*
+       If have mmap, and the request size meets the mmap threshold, and
+       the system supports mmap, and there are few enough currently
+       allocated mmapped regions, try to directly map this request
+       rather than expanding top.
+       */
+
+    if ((unsigned long)(nb) >= (unsigned long)(av->mmap_threshold) &&
+	    (av->n_mmaps < av->n_mmaps_max)) {
+
+	char* mm;             /* return value from mmap call*/
+
+	/*
+	   Round up size to nearest page.  For mmapped chunks, the overhead
+	   is one (sizeof(size_t)) unit larger than for normal chunks, because there
+	   is no following chunk whose prev_size field could be used.
+	   */
+	size = (nb + (sizeof(size_t)) + MALLOC_ALIGN_MASK + pagemask) & ~pagemask;
+
+	/* Don't try if size wraps around 0 */
+	if ((unsigned long)(size) > (unsigned long)(nb)) {
+
+	    mm = (char*)(MMAP(0, size, PROT_READ|PROT_WRITE, MAP_PRIVATE));
+
+	    if (mm != (char*)(MORECORE_FAILURE)) {
+
+		/*
+		   The offset to the start of the mmapped region is stored
+		   in the prev_size field of the chunk. This allows us to adjust
+		   returned start address to meet alignment requirements here
+		   and in memalign(), and still be able to compute proper
+		   address argument for later munmap in free() and realloc().
+		   */
+
+		front_misalign = (size_t)chunk2mem(mm) & MALLOC_ALIGN_MASK;
+		if (front_misalign > 0) {
+		    correction = MALLOC_ALIGNMENT - front_misalign;
+		    p = (mchunkptr)(mm + correction);
+		    p->prev_size = correction;
+		    set_head(p, (size - correction) |IS_MMAPPED);
+		}
+		else {
+		    p = (mchunkptr)mm;
+		    p->prev_size = 0;
+		    set_head(p, size|IS_MMAPPED);
+		}
+
+		/* update statistics */
+
+		if (++av->n_mmaps > av->max_n_mmaps)
+		    av->max_n_mmaps = av->n_mmaps;
+
+		sum = av->mmapped_mem += size;
+		if (sum > (unsigned long)(av->max_mmapped_mem))
+		    av->max_mmapped_mem = sum;
+		sum += av->sbrked_mem;
+		if (sum > (unsigned long)(av->max_total_mem))
+		    av->max_total_mem = sum;
+
+		check_chunk(p);
+
+		return chunk2mem(p);
+	    }
+	}
+    }
+
+    /* Record incoming configuration of top */
+
+    old_top  = av->top;
+    old_size = chunksize(old_top);
+    old_end  = (char*)(chunk_at_offset(old_top, old_size));
+
+    brk = snd_brk = (char*)(MORECORE_FAILURE);
+
+    /* If not the first time through, we require old_size to
+     * be at least MINSIZE and to have prev_inuse set.  */
+
+    assert((old_top == initial_top(av) && old_size == 0) ||
+	    ((unsigned long) (old_size) >= MINSIZE &&
+	     prev_inuse(old_top)));
+
+    /* Precondition: not enough current space to satisfy nb request */
+    assert((unsigned long)(old_size) < (unsigned long)(nb + MINSIZE));
+
+    /* Precondition: all fastbins are consolidated */
+    assert(!have_fastchunks(av));
+
+
+    /* Request enough space for nb + pad + overhead */
+
+    size = nb + av->top_pad + MINSIZE;
+
+    /*
+       If contiguous, we can subtract out existing space that we hope to
+       combine with new space. We add it back later only if
+       we don't actually get contiguous space.
+       */
+
+    if (contiguous(av))
+	size -= old_size;
+
+    /*
+       Round to a multiple of page size.
+       If MORECORE is not contiguous, this ensures that we only call it
+       with whole-page arguments.  And if MORECORE is contiguous and
+       this is not first time through, this preserves page-alignment of
+       previous calls. Otherwise, we correct to page-align below.
+       */
+
+    size = (size + pagemask) & ~pagemask;
+
+    /*
+       Don't try to call MORECORE if argument is so big as to appear
+       negative. Note that since mmap takes size_t arg, it may succeed
+       below even if we cannot call MORECORE.
+       */
+
+    if (size > 0)
+	brk = (char*)(MORECORE(size));
+
+    /*
+       If have mmap, try using it as a backup when MORECORE fails or
+       cannot be used. This is worth doing on systems that have "holes" in
+       address space, so sbrk cannot extend to give contiguous space, but
+       space is available elsewhere.  Note that we ignore mmap max count
+       and threshold limits, since the space will not be used as a
+       segregated mmap region.
+       */
+
+    if (brk == (char*)(MORECORE_FAILURE)) {
+
+	/* Cannot merge with old top, so add its size back in */
+	if (contiguous(av))
+	    size = (size + old_size + pagemask) & ~pagemask;
+
+	/* If we are relying on mmap as backup, then use larger units */
+	if ((unsigned long)(size) < (unsigned long)(MMAP_AS_MORECORE_SIZE))
+	    size = MMAP_AS_MORECORE_SIZE;
+
+	/* Don't try if size wraps around 0 */
+	if ((unsigned long)(size) > (unsigned long)(nb)) {
+
+	    brk = (char*)(MMAP(0, size, PROT_READ|PROT_WRITE, MAP_PRIVATE));
+
+	    if (brk != (char*)(MORECORE_FAILURE)) {
+
+		/* We do not need, and cannot use, another sbrk call to find end */
+		snd_brk = brk + size;
+
+		/* Record that we no longer have a contiguous sbrk region.
+		   After the first time mmap is used as backup, we do not
+		   ever rely on contiguous space since this could incorrectly
+		   bridge regions.
+		   */
+		set_noncontiguous(av);
+	    }
+	}
+    }
+
+    if (brk != (char*)(MORECORE_FAILURE)) {
+	av->sbrked_mem += size;
+
+	/*
+	   If MORECORE extends previous space, we can likewise extend top size.
+	   */
+
+	if (brk == old_end && snd_brk == (char*)(MORECORE_FAILURE)) {
+	    set_head(old_top, (size + old_size) | PREV_INUSE);
+	}
+
+	/*
+	   Otherwise, make adjustments:
+
+	 * If the first time through or noncontiguous, we need to call sbrk
+	 just to find out where the end of memory lies.
+
+	 * We need to ensure that all returned chunks from malloc will meet
+	 MALLOC_ALIGNMENT
+
+	 * If there was an intervening foreign sbrk, we need to adjust sbrk
+	 request size to account for fact that we will not be able to
+	 combine new space with existing space in old_top.
+
+	 * Almost all systems internally allocate whole pages at a time, in
+	 which case we might as well use the whole last page of request.
+	 So we allocate enough more memory to hit a page boundary now,
+	 which in turn causes future contiguous calls to page-align.
+	 */
+
+	else {
+	    front_misalign = 0;
+	    end_misalign = 0;
+	    correction = 0;
+	    aligned_brk = brk;
+
+	    /*
+	       If MORECORE returns an address lower than we have seen before,
+	       we know it isn't really contiguous.  This and some subsequent
+	       checks help cope with non-conforming MORECORE functions and
+	       the presence of "foreign" calls to MORECORE from outside of
+	       malloc or by other threads.  We cannot guarantee to detect
+	       these in all cases, but cope with the ones we do detect.
+	       */
+	    if (contiguous(av) && old_size != 0 && brk < old_end) {
+		set_noncontiguous(av);
+	    }
+
+	    /* handle contiguous cases */
+	    if (contiguous(av)) {
+
+		/* We can tolerate forward non-contiguities here (usually due
+		   to foreign calls) but treat them as part of our space for
+		   stats reporting.  */
+		if (old_size != 0)
+		    av->sbrked_mem += brk - old_end;
+
+		/* Guarantee alignment of first new chunk made from this space */
+
+		front_misalign = (size_t)chunk2mem(brk) & MALLOC_ALIGN_MASK;
+		if (front_misalign > 0) {
+
+		    /*
+		       Skip over some bytes to arrive at an aligned position.
+		       We don't need to specially mark these wasted front bytes.
+		       They will never be accessed anyway because
+		       prev_inuse of av->top (and any chunk created from its start)
+		       is always true after initialization.
+		       */
+
+		    correction = MALLOC_ALIGNMENT - front_misalign;
+		    aligned_brk += correction;
+		}
+
+		/*
+		   If this isn't adjacent to existing space, then we will not
+		   be able to merge with old_top space, so must add to 2nd request.
+		   */
+
+		correction += old_size;
+
+		/* Extend the end address to hit a page boundary */
+		end_misalign = (size_t)(brk + size + correction);
+		correction += ((end_misalign + pagemask) & ~pagemask) - end_misalign;
+
+		assert(correction >= 0);
+		snd_brk = (char*)(MORECORE(correction));
+
+		if (snd_brk == (char*)(MORECORE_FAILURE)) {
+		    /*
+		       If can't allocate correction, try to at least find out current
+		       brk.  It might be enough to proceed without failing.
+		       */
+		    correction = 0;
+		    snd_brk = (char*)(MORECORE(0));
+		}
+		else if (snd_brk < brk) {
+		    /*
+		       If the second call gives noncontiguous space even though
+		       it says it won't, the only course of action is to ignore
+		       results of second call, and conservatively estimate where
+		       the first call left us. Also set noncontiguous, so this
+		       won't happen again, leaving at most one hole.
+
+		       Note that this check is intrinsically incomplete.  Because
+		       MORECORE is allowed to give more space than we ask for,
+		       there is no reliable way to detect a noncontiguity
+		       producing a forward gap for the second call.
+		       */
+		    snd_brk = brk + size;
+		    correction = 0;
+		    set_noncontiguous(av);
+		}
+
+	    }
+
+	    /* handle non-contiguous cases */
+	    else {
+		/* MORECORE/mmap must correctly align */
+		assert(aligned_OK(chunk2mem(brk)));
+
+		/* Find out current end of memory */
+		if (snd_brk == (char*)(MORECORE_FAILURE)) {
+		    snd_brk = (char*)(MORECORE(0));
+		    av->sbrked_mem += snd_brk - brk - size;
+		}
+	    }
+
+	    /* Adjust top based on results of second sbrk */
+	    if (snd_brk != (char*)(MORECORE_FAILURE)) {
+		av->top = (mchunkptr)aligned_brk;
+		set_head(av->top, (snd_brk - aligned_brk + correction) | PREV_INUSE);
+		av->sbrked_mem += correction;
+
+		/*
+		   If not the first time through, we either have a
+		   gap due to foreign sbrk or a non-contiguous region.  Insert a
+		   double fencepost at old_top to prevent consolidation with space
+		   we don't own. These fenceposts are artificial chunks that are
+		   marked as inuse and are in any case too small to use.  We need
+		   two to make sizes and alignments work out.
+		   */
+
+		if (old_size != 0) {
+		    /* Shrink old_top to insert fenceposts, keeping size a
+		       multiple of MALLOC_ALIGNMENT. We know there is at least
+		       enough space in old_top to do this.
+		       */
+		    old_size = (old_size - 3*(sizeof(size_t))) & ~MALLOC_ALIGN_MASK;
+		    set_head(old_top, old_size | PREV_INUSE);
+
+		    /*
+		       Note that the following assignments completely overwrite
+		       old_top when old_size was previously MINSIZE.  This is
+		       intentional. We need the fencepost, even if old_top otherwise gets
+		       lost.
+		       */
+		    chunk_at_offset(old_top, old_size          )->size =
+			(sizeof(size_t))|PREV_INUSE;
+
+		    chunk_at_offset(old_top, old_size + (sizeof(size_t)))->size =
+			(sizeof(size_t))|PREV_INUSE;
+
+		    /* If possible, release the rest, suppressing trimming.  */
+		    if (old_size >= MINSIZE) {
+			size_t tt = av->trim_threshold;
+			av->trim_threshold = (size_t)(-1);
+			free(chunk2mem(old_top));
+			av->trim_threshold = tt;
+		    }
+		}
+	    }
+	}
+
+	/* Update statistics */
+	sum = av->sbrked_mem;
+	if (sum > (unsigned long)(av->max_sbrked_mem))
+	    av->max_sbrked_mem = sum;
+
+	sum += av->mmapped_mem;
+	if (sum > (unsigned long)(av->max_total_mem))
+	    av->max_total_mem = sum;
+
+	check_malloc_state();
+
+	/* finally, do the allocation */
+
+	p = av->top;
+	size = chunksize(p);
+
+	/* check that one of the above allocation paths succeeded */
+	if ((unsigned long)(size) >= (unsigned long)(nb + MINSIZE)) {
+	    remainder_size = size - nb;
+	    remainder = chunk_at_offset(p, nb);
+	    av->top = remainder;
+	    set_head(p, nb | PREV_INUSE);
+	    set_head(remainder, remainder_size | PREV_INUSE);
+	    check_malloced_chunk(p, nb);
+	    return chunk2mem(p);
+	}
+
+    }
+
+    /* catch all failure paths */
+    errno = ENOMEM;
+    return 0;
+}
+
+
+/*
+  Compute index for size. We expect this to be inlined when
+  compiled with optimization, else not, which works out well.
+*/
+static int __malloc_largebin_index(unsigned int sz)
+{
+    unsigned int  x = sz >> SMALLBIN_WIDTH;
+    unsigned int m;            /* bit position of highest set bit of m */
+
+    if (x >= 0x10000) return NBINS-1;
+
+    /* On intel, use BSRL instruction to find highest bit */
+#if defined(__GNUC__) && defined(i386)
+
+    __asm__("bsrl %1,%0\n\t"
+	    : "=r" (m)
+	    : "g"  (x));
+
+#else
+    {
+	/*
+	   Based on branch-free nlz algorithm in chapter 5 of Henry
+	   S. Warren Jr's book "Hacker's Delight".
+	   */
+
+	unsigned int n = ((x - 0x100) >> 16) & 8;
+	x <<= n;
+	m = ((x - 0x1000) >> 16) & 4;
+	n += m;
+	x <<= m;
+	m = ((x - 0x4000) >> 16) & 2;
+	n += m;
+	x = (x << m) >> 14;
+	m = 13 - n + (x & ~(x>>1));
+    }
+#endif
+
+    /* Use next 2 bits to create finer-granularity bins */
+    return NSMALLBINS + (m << 2) + ((sz >> (m + 6)) & 3);
+}
+
+
+
+/* ----------------------------------------------------------------------
+ *
+ * PUBLIC STUFF
+ *
+ * ----------------------------------------------------------------------*/
+
+
+/* ------------------------------ malloc ------------------------------ */
+void* malloc(size_t bytes)
+{
+    mstate av;
+
+    size_t nb;               /* normalized request size */
+    unsigned int    idx;              /* associated bin index */
+    mbinptr         bin;              /* associated bin */
+    mfastbinptr*    fb;               /* associated fastbin */
+
+    mchunkptr       victim;           /* inspected/selected chunk */
+    size_t size;             /* its size */
+    int             victim_index;     /* its bin index */
+
+    mchunkptr       remainder;        /* remainder from a split */
+    unsigned long    remainder_size;   /* its size */
+
+    unsigned int    block;            /* bit map traverser */
+    unsigned int    bit;              /* bit map traverser */
+    unsigned int    map;              /* current word of binmap */
+
+    mchunkptr       fwd;              /* misc temp for linking */
+    mchunkptr       bck;              /* misc temp for linking */
+    void *          sysmem;
+
+    LOCK;
+    av = get_malloc_state();
+    /*
+       Convert request size to internal form by adding (sizeof(size_t)) bytes
+       overhead plus possibly more to obtain necessary alignment and/or
+       to obtain a size of at least MINSIZE, the smallest allocatable
+       size. Also, checked_request2size traps (returning 0) request sizes
+       that are so large that they wrap around zero when padded and
+       aligned.
+       */
+
+    checked_request2size(bytes, nb);
+
+    /*
+       Bypass search if no frees yet
+       */
+    if (!have_anychunks(av)) {
+	if (av->max_fast == 0) /* initialization check */
+	    __malloc_consolidate(av);
+	goto use_top;
+    }
+
+    /*
+       If the size qualifies as a fastbin, first check corresponding bin.
+       */
+
+    if ((unsigned long)(nb) <= (unsigned long)(av->max_fast)) {
+	fb = &(av->fastbins[(fastbin_index(nb))]);
+	if ( (victim = *fb) != 0) {
+	    *fb = victim->fd;
+	    check_remalloced_chunk(victim, nb);
+	    UNLOCK;
+	    return chunk2mem(victim);
+	}
+    }
+
+    /*
+       If a small request, check regular bin.  Since these "smallbins"
+       hold one size each, no searching within bins is necessary.
+       (For a large request, we need to wait until unsorted chunks are
+       processed to find best fit. But for small ones, fits are exact
+       anyway, so we can check now, which is faster.)
+       */
+
+    if (in_smallbin_range(nb)) {
+	idx = smallbin_index(nb);
+	bin = bin_at(av,idx);
+
+	if ( (victim = last(bin)) != bin) {
+	    bck = victim->bk;
+	    set_inuse_bit_at_offset(victim, nb);
+	    bin->bk = bck;
+	    bck->fd = bin;
+
+	    check_malloced_chunk(victim, nb);
+	    UNLOCK;
+	    return chunk2mem(victim);
+	}
+    }
+
+    /* If this is a large request, consolidate fastbins before continuing.
+       While it might look excessive to kill all fastbins before
+       even seeing if there is space available, this avoids
+       fragmentation problems normally associated with fastbins.
+       Also, in practice, programs tend to have runs of either small or
+       large requests, but less often mixtures, so consolidation is not
+       invoked all that often in most programs. And the programs that
+       it is called frequently in otherwise tend to fragment.
+       */
+
+    else {
+	idx = __malloc_largebin_index(nb);
+	if (have_fastchunks(av)) 
+	    __malloc_consolidate(av);
+    }
+
+    /*
+       Process recently freed or remaindered chunks, taking one only if
+       it is exact fit, or, if this a small request, the chunk is remainder from
+       the most recent non-exact fit.  Place other traversed chunks in
+       bins.  Note that this step is the only place in any routine where
+       chunks are placed in bins.
+       */
+
+    while ( (victim = unsorted_chunks(av)->bk) != unsorted_chunks(av)) {
+	bck = victim->bk;
+	size = chunksize(victim);
+
+	/* If a small request, try to use last remainder if it is the
+	   only chunk in unsorted bin.  This helps promote locality for
+	   runs of consecutive small requests. This is the only
+	   exception to best-fit, and applies only when there is
+	   no exact fit for a small chunk.
+	   */
+
+	if (in_smallbin_range(nb) &&
+		bck == unsorted_chunks(av) &&
+		victim == av->last_remainder &&
+		(unsigned long)(size) > (unsigned long)(nb + MINSIZE)) {
+
+	    /* split and reattach remainder */
+	    remainder_size = size - nb;
+	    remainder = chunk_at_offset(victim, nb);
+	    unsorted_chunks(av)->bk = unsorted_chunks(av)->fd = remainder;
+	    av->last_remainder = remainder;
+	    remainder->bk = remainder->fd = unsorted_chunks(av);
+
+	    set_head(victim, nb | PREV_INUSE);
+	    set_head(remainder, remainder_size | PREV_INUSE);
+	    set_foot(remainder, remainder_size);
+
+	    check_malloced_chunk(victim, nb);
+	    UNLOCK;
+	    return chunk2mem(victim);
+	}
+
+	/* remove from unsorted list */
+	unsorted_chunks(av)->bk = bck;
+	bck->fd = unsorted_chunks(av);
+
+	/* Take now instead of binning if exact fit */
+
+	if (size == nb) {
+	    set_inuse_bit_at_offset(victim, size);
+	    check_malloced_chunk(victim, nb);
+	    UNLOCK;
+	    return chunk2mem(victim);
+	}
+
+	/* place chunk in bin */
+
+	if (in_smallbin_range(size)) {
+	    victim_index = smallbin_index(size);
+	    bck = bin_at(av, victim_index);
+	    fwd = bck->fd;
+	}
+	else {
+	    victim_index = __malloc_largebin_index(size);
+	    bck = bin_at(av, victim_index);
+	    fwd = bck->fd;
+
+	    if (fwd != bck) {
+		/* if smaller than smallest, place first */
+		if ((unsigned long)(size) < (unsigned long)(bck->bk->size)) {
+		    fwd = bck;
+		    bck = bck->bk;
+		}
+		else if ((unsigned long)(size) >=
+			(unsigned long)(FIRST_SORTED_BIN_SIZE)) {
+
+		    /* maintain large bins in sorted order */
+		    size |= PREV_INUSE; /* Or with inuse bit to speed comparisons */
+		    while ((unsigned long)(size) < (unsigned long)(fwd->size))
+			fwd = fwd->fd;
+		    bck = fwd->bk;
+		}
+	    }
+	}
+
+	mark_bin(av, victim_index);
+	victim->bk = bck;
+	victim->fd = fwd;
+	fwd->bk = victim;
+	bck->fd = victim;
+    }
+
+    /*
+       If a large request, scan through the chunks of current bin to
+       find one that fits.  (This will be the smallest that fits unless
+       FIRST_SORTED_BIN_SIZE has been changed from default.)  This is
+       the only step where an unbounded number of chunks might be
+       scanned without doing anything useful with them. However the
+       lists tend to be short.
+       */
+
+    if (!in_smallbin_range(nb)) {
+	bin = bin_at(av, idx);
+
+	for (victim = last(bin); victim != bin; victim = victim->bk) {
+	    size = chunksize(victim);
+
+	    if ((unsigned long)(size) >= (unsigned long)(nb)) {
+		remainder_size = size - nb;
+		unlink(victim, bck, fwd);
+
+		/* Exhaust */
+		if (remainder_size < MINSIZE)  {
+		    set_inuse_bit_at_offset(victim, size);
+		    check_malloced_chunk(victim, nb);
+		    UNLOCK;
+		    return chunk2mem(victim);
+		}
+		/* Split */
+		else {
+		    remainder = chunk_at_offset(victim, nb);
+		    unsorted_chunks(av)->bk = unsorted_chunks(av)->fd = remainder;
+		    remainder->bk = remainder->fd = unsorted_chunks(av);
+		    set_head(victim, nb | PREV_INUSE);
+		    set_head(remainder, remainder_size | PREV_INUSE);
+		    set_foot(remainder, remainder_size);
+		    check_malloced_chunk(victim, nb);
+		    UNLOCK;
+		    return chunk2mem(victim);
+		}
+	    }
+	}
+    }
+
+    /*
+       Search for a chunk by scanning bins, starting with next largest
+       bin. This search is strictly by best-fit; i.e., the smallest
+       (with ties going to approximately the least recently used) chunk
+       that fits is selected.
+
+       The bitmap avoids needing to check that most blocks are nonempty.
+       */
+
+    ++idx;
+    bin = bin_at(av,idx);
+    block = idx2block(idx);
+    map = av->binmap[block];
+    bit = idx2bit(idx);
+
+    for (;;) {
+
+	/* Skip rest of block if there are no more set bits in this block.  */
+	if (bit > map || bit == 0) {
+	    do {
+		if (++block >= BINMAPSIZE)  /* out of bins */
+		    goto use_top;
+	    } while ( (map = av->binmap[block]) == 0);
+
+	    bin = bin_at(av, (block << BINMAPSHIFT));
+	    bit = 1;
+	}
+
+	/* Advance to bin with set bit. There must be one. */
+	while ((bit & map) == 0) {
+	    bin = next_bin(bin);
+	    bit <<= 1;
+	    assert(bit != 0);
+	}
+
+	/* Inspect the bin. It is likely to be non-empty */
+	victim = last(bin);
+
+	/*  If a false alarm (empty bin), clear the bit. */
+	if (victim == bin) {
+	    av->binmap[block] = map &= ~bit; /* Write through */
+	    bin = next_bin(bin);
+	    bit <<= 1;
+	}
+
+	else {
+	    size = chunksize(victim);
+
+	    /*  We know the first chunk in this bin is big enough to use. */
+	    assert((unsigned long)(size) >= (unsigned long)(nb));
+
+	    remainder_size = size - nb;
+
+	    /* unlink */
+	    bck = victim->bk;
+	    bin->bk = bck;
+	    bck->fd = bin;
+
+	    /* Exhaust */
+	    if (remainder_size < MINSIZE) {
+		set_inuse_bit_at_offset(victim, size);
+		check_malloced_chunk(victim, nb);
+		UNLOCK;
+		return chunk2mem(victim);
+	    }
+
+	    /* Split */
+	    else {
+		remainder = chunk_at_offset(victim, nb);
+
+		unsorted_chunks(av)->bk = unsorted_chunks(av)->fd = remainder;
+		remainder->bk = remainder->fd = unsorted_chunks(av);
+		/* advertise as last remainder */
+		if (in_smallbin_range(nb))
+		    av->last_remainder = remainder;
+
+		set_head(victim, nb | PREV_INUSE);
+		set_head(remainder, remainder_size | PREV_INUSE);
+		set_foot(remainder, remainder_size);
+		check_malloced_chunk(victim, nb);
+		UNLOCK;
+		return chunk2mem(victim);
+	    }
+	}
+    }
+
+use_top:
+    /*
+       If large enough, split off the chunk bordering the end of memory
+       (held in av->top). Note that this is in accord with the best-fit
+       search rule.  In effect, av->top is treated as larger (and thus
+       less well fitting) than any other available chunk since it can
+       be extended to be as large as necessary (up to system
+       limitations).
+
+       We require that av->top always exists (i.e., has size >=
+       MINSIZE) after initialization, so if it would otherwise be
+       exhuasted by current request, it is replenished. (The main
+       reason for ensuring it exists is that we may need MINSIZE space
+       to put in fenceposts in sysmalloc.)
+       */
+
+    victim = av->top;
+    size = chunksize(victim);
+
+    if ((unsigned long)(size) >= (unsigned long)(nb + MINSIZE)) {
+	remainder_size = size - nb;
+	remainder = chunk_at_offset(victim, nb);
+	av->top = remainder;
+	set_head(victim, nb | PREV_INUSE);
+	set_head(remainder, remainder_size | PREV_INUSE);
+
+	check_malloced_chunk(victim, nb);
+	UNLOCK;
+	return chunk2mem(victim);
+    }
+
+    /* If no space in top, relay to handle system-dependent cases */
+    sysmem = __malloc_alloc(nb, av);
+    UNLOCK;
+    return sysmem;
+}
+
diff --git a/libc/stdlib/malloc-standard/malloc.h b/libc/stdlib/malloc-standard/malloc.h
new file mode 100644
index 000000000..46858332d
--- /dev/null
+++ b/libc/stdlib/malloc-standard/malloc.h
@@ -0,0 +1,953 @@
+/*
+  This is a version (aka dlmalloc) of malloc/free/realloc written by
+  Doug Lea and released to the public domain.  Use, modify, and
+  redistribute this code without permission or acknowledgement in any
+  way you wish.  Send questions, comments, complaints, performance
+  data, etc to dl@cs.oswego.edu
+
+  VERSION 2.7.2 Sat Aug 17 09:07:30 2002  Doug Lea  (dl at gee)
+
+  Note: There may be an updated version of this malloc obtainable at
+           ftp://gee.cs.oswego.edu/pub/misc/malloc.c
+  Check before installing!
+
+  Hacked up for uClibc by Erik Andersen <andersen@codepoet.org>
+*/
+
+#include <features.h>
+#include <stddef.h>
+#include <unistd.h>
+#include <errno.h>
+#include <string.h>
+#include <malloc.h>
+
+
+#ifdef __UCLIBC_HAS_THREADS__
+#include <pthread.h>
+extern pthread_mutex_t __malloc_lock;
+# define LOCK	__pthread_mutex_lock(&__malloc_lock)
+# define UNLOCK	__pthread_mutex_unlock(&__malloc_lock);
+#else
+# define LOCK
+# define UNLOCK
+#endif
+
+
+
+/*
+  MALLOC_ALIGNMENT is the minimum alignment for malloc'ed chunks.
+  It must be a power of two at least 2 * (sizeof(size_t)), even on machines
+  for which smaller alignments would suffice. It may be defined as
+  larger than this though. Note however that code and data structures
+  are optimized for the case of 8-byte alignment.
+*/
+#ifndef MALLOC_ALIGNMENT
+#define MALLOC_ALIGNMENT       (2 * (sizeof(size_t)))
+#endif
+
+/* The corresponding bit mask value */
+#define MALLOC_ALIGN_MASK      (MALLOC_ALIGNMENT - 1)
+
+/*
+  TRIM_FASTBINS controls whether free() of a very small chunk can
+  immediately lead to trimming. Setting to true (1) can reduce memory
+  footprint, but will almost always slow down programs that use a lot
+  of small chunks.
+
+  Define this only if you are willing to give up some speed to more
+  aggressively reduce system-level memory footprint when releasing
+  memory in programs that use many small chunks.  You can get
+  essentially the same effect by setting MXFAST to 0, but this can
+  lead to even greater slowdowns in programs using many small chunks.
+  TRIM_FASTBINS is an in-between compile-time option, that disables
+  only those chunks bordering topmost memory from being placed in
+  fastbins.
+*/
+#ifndef TRIM_FASTBINS
+#define TRIM_FASTBINS  0
+#endif
+
+
+/*
+  MORECORE-related declarations. By default, rely on sbrk
+*/
+
+
+/*
+  MORECORE is the name of the routine to call to obtain more memory
+  from the system.  See below for general guidance on writing
+  alternative MORECORE functions, as well as a version for WIN32 and a
+  sample version for pre-OSX macos.
+*/
+#ifndef MORECORE
+#define MORECORE sbrk
+#endif
+
+/*
+  MORECORE_FAILURE is the value returned upon failure of MORECORE
+  as well as mmap. Since it cannot be an otherwise valid memory address,
+  and must reflect values of standard sys calls, you probably ought not
+  try to redefine it.
+*/
+#ifndef MORECORE_FAILURE
+#define MORECORE_FAILURE (-1)
+#endif
+
+/*
+  If MORECORE_CONTIGUOUS is true, take advantage of fact that
+  consecutive calls to MORECORE with positive arguments always return
+  contiguous increasing addresses.  This is true of unix sbrk.  Even
+  if not defined, when regions happen to be contiguous, malloc will
+  permit allocations spanning regions obtained from different
+  calls. But defining this when applicable enables some stronger
+  consistency checks and space efficiencies.
+*/
+#ifndef MORECORE_CONTIGUOUS
+#define MORECORE_CONTIGUOUS 1
+#endif
+
+/*
+   MMAP_AS_MORECORE_SIZE is the minimum mmap size argument to use if
+   sbrk fails, and mmap is used as a backup (which is done only if
+   HAVE_MMAP).  The value must be a multiple of page size.  This
+   backup strategy generally applies only when systems have "holes" in
+   address space, so sbrk cannot perform contiguous expansion, but
+   there is still space available on system.  On systems for which
+   this is known to be useful (i.e. most linux kernels), this occurs
+   only when programs allocate huge amounts of memory.  Between this,
+   and the fact that mmap regions tend to be limited, the size should
+   be large, to avoid too many mmap calls and thus avoid running out
+   of kernel resources.
+*/
+#ifndef MMAP_AS_MORECORE_SIZE
+#define MMAP_AS_MORECORE_SIZE (1024 * 1024)
+#endif
+
+/*
+  The system page size. To the extent possible, this malloc manages
+  memory from the system in page-size units.  Note that this value is
+  cached during initialization into a field of malloc_state. So even
+  if malloc_getpagesize is a function, it is only called once.
+
+  The following mechanics for getpagesize were adapted from bsd/gnu
+  getpagesize.h. If none of the system-probes here apply, a value of
+  4096 is used, which should be OK: If they don't apply, then using
+  the actual value probably doesn't impact performance.
+*/
+#ifndef malloc_getpagesize
+#  include <unistd.h>
+#  define malloc_getpagesize sysconf(_SC_PAGE_SIZE)
+#else /* just guess */
+#  define malloc_getpagesize (4096)
+#endif
+
+
+/* mallopt tuning options */
+
+/*
+  M_MXFAST is the maximum request size used for "fastbins", special bins
+  that hold returned chunks without consolidating their spaces. This
+  enables future requests for chunks of the same size to be handled
+  very quickly, but can increase fragmentation, and thus increase the
+  overall memory footprint of a program.
+
+  This malloc manages fastbins very conservatively yet still
+  efficiently, so fragmentation is rarely a problem for values less
+  than or equal to the default.  The maximum supported value of MXFAST
+  is 80. You wouldn't want it any higher than this anyway.  Fastbins
+  are designed especially for use with many small structs, objects or
+  strings -- the default handles structs/objects/arrays with sizes up
+  to 16 4byte fields, or small strings representing words, tokens,
+  etc. Using fastbins for larger objects normally worsens
+  fragmentation without improving speed.
+
+  M_MXFAST is set in REQUEST size units. It is internally used in
+  chunksize units, which adds padding and alignment.  You can reduce
+  M_MXFAST to 0 to disable all use of fastbins.  This causes the malloc
+  algorithm to be a closer approximation of fifo-best-fit in all cases,
+  not just for larger requests, but will generally cause it to be
+  slower.
+*/
+
+
+/* M_MXFAST is a standard SVID/XPG tuning option, usually listed in malloc.h */
+#ifndef M_MXFAST
+#define M_MXFAST            1
+#endif
+
+#ifndef DEFAULT_MXFAST
+#define DEFAULT_MXFAST     64
+#endif
+
+
+/*
+  M_TRIM_THRESHOLD is the maximum amount of unused top-most memory
+  to keep before releasing via malloc_trim in free().
+
+  Automatic trimming is mainly useful in long-lived programs.
+  Because trimming via sbrk can be slow on some systems, and can
+  sometimes be wasteful (in cases where programs immediately
+  afterward allocate more large chunks) the value should be high
+  enough so that your overall system performance would improve by
+  releasing this much memory.
+
+  The trim threshold and the mmap control parameters (see below)
+  can be traded off with one another. Trimming and mmapping are
+  two different ways of releasing unused memory back to the
+  system. Between these two, it is often possible to keep
+  system-level demands of a long-lived program down to a bare
+  minimum. For example, in one test suite of sessions measuring
+  the XF86 X server on Linux, using a trim threshold of 128K and a
+  mmap threshold of 192K led to near-minimal long term resource
+  consumption.
+
+  If you are using this malloc in a long-lived program, it should
+  pay to experiment with these values.  As a rough guide, you
+  might set to a value close to the average size of a process
+  (program) running on your system.  Releasing this much memory
+  would allow such a process to run in memory.  Generally, it's
+  worth it to tune for trimming rather tham memory mapping when a
+  program undergoes phases where several large chunks are
+  allocated and released in ways that can reuse each other's
+  storage, perhaps mixed with phases where there are no such
+  chunks at all.  And in well-behaved long-lived programs,
+  controlling release of large blocks via trimming versus mapping
+  is usually faster.
+
+  However, in most programs, these parameters serve mainly as
+  protection against the system-level effects of carrying around
+  massive amounts of unneeded memory. Since frequent calls to
+  sbrk, mmap, and munmap otherwise degrade performance, the default
+  parameters are set to relatively high values that serve only as
+  safeguards.
+
+  The trim value must be greater than page size to have any useful
+  effect.  To disable trimming completely, you can set to
+  (unsigned long)(-1)
+
+  Trim settings interact with fastbin (MXFAST) settings: Unless
+  TRIM_FASTBINS is defined, automatic trimming never takes place upon
+  freeing a chunk with size less than or equal to MXFAST. Trimming is
+  instead delayed until subsequent freeing of larger chunks. However,
+  you can still force an attempted trim by calling malloc_trim.
+
+  Also, trimming is not generally possible in cases where
+  the main arena is obtained via mmap.
+
+  Note that the trick some people use of mallocing a huge space and
+  then freeing it at program startup, in an attempt to reserve system
+  memory, doesn't have the intended effect under automatic trimming,
+  since that memory will immediately be returned to the system.
+*/
+#define M_TRIM_THRESHOLD       -1
+
+#ifndef DEFAULT_TRIM_THRESHOLD
+#define DEFAULT_TRIM_THRESHOLD (256 * 1024)
+#endif
+
+/*
+  M_TOP_PAD is the amount of extra `padding' space to allocate or
+  retain whenever sbrk is called. It is used in two ways internally:
+
+  * When sbrk is called to extend the top of the arena to satisfy
+  a new malloc request, this much padding is added to the sbrk
+  request.
+
+  * When malloc_trim is called automatically from free(),
+  it is used as the `pad' argument.
+
+  In both cases, the actual amount of padding is rounded
+  so that the end of the arena is always a system page boundary.
+
+  The main reason for using padding is to avoid calling sbrk so
+  often. Having even a small pad greatly reduces the likelihood
+  that nearly every malloc request during program start-up (or
+  after trimming) will invoke sbrk, which needlessly wastes
+  time.
+
+  Automatic rounding-up to page-size units is normally sufficient
+  to avoid measurable overhead, so the default is 0.  However, in
+  systems where sbrk is relatively slow, it can pay to increase
+  this value, at the expense of carrying around more memory than
+  the program needs.
+*/
+#define M_TOP_PAD              -2
+
+#ifndef DEFAULT_TOP_PAD
+#define DEFAULT_TOP_PAD        (0)
+#endif
+
+/*
+  M_MMAP_THRESHOLD is the request size threshold for using mmap()
+  to service a request. Requests of at least this size that cannot
+  be allocated using already-existing space will be serviced via mmap.
+  (If enough normal freed space already exists it is used instead.)
+
+  Using mmap segregates relatively large chunks of memory so that
+  they can be individually obtained and released from the host
+  system. A request serviced through mmap is never reused by any
+  other request (at least not directly; the system may just so
+  happen to remap successive requests to the same locations).
+
+  Segregating space in this way has the benefits that:
+
+   1. Mmapped space can ALWAYS be individually released back
+      to the system, which helps keep the system level memory
+      demands of a long-lived program low.
+   2. Mapped memory can never become `locked' between
+      other chunks, as can happen with normally allocated chunks, which
+      means that even trimming via malloc_trim would not release them.
+   3. On some systems with "holes" in address spaces, mmap can obtain
+      memory that sbrk cannot.
+
+  However, it has the disadvantages that:
+
+   1. The space cannot be reclaimed, consolidated, and then
+      used to service later requests, as happens with normal chunks.
+   2. It can lead to more wastage because of mmap page alignment
+      requirements
+   3. It causes malloc performance to be more dependent on host
+      system memory management support routines which may vary in
+      implementation quality and may impose arbitrary
+      limitations. Generally, servicing a request via normal
+      malloc steps is faster than going through a system's mmap.
+
+  The advantages of mmap nearly always outweigh disadvantages for
+  "large" chunks, but the value of "large" varies across systems.  The
+  default is an empirically derived value that works well in most
+  systems.
+*/
+#define M_MMAP_THRESHOLD      -3
+
+#ifndef DEFAULT_MMAP_THRESHOLD
+#define DEFAULT_MMAP_THRESHOLD (256 * 1024)
+#endif
+
+/*
+  M_MMAP_MAX is the maximum number of requests to simultaneously
+  service using mmap. This parameter exists because
+. Some systems have a limited number of internal tables for
+  use by mmap, and using more than a few of them may degrade
+  performance.
+
+  The default is set to a value that serves only as a safeguard.
+  Setting to 0 disables use of mmap for servicing large requests.  If
+  HAVE_MMAP is not set, the default value is 0, and attempts to set it
+  to non-zero values in mallopt will fail.
+*/
+#define M_MMAP_MAX             -4
+
+#ifndef DEFAULT_MMAP_MAX
+#define DEFAULT_MMAP_MAX       (65536)
+#endif
+
+
+/* ------------------ MMAP support ------------------  */
+#include <fcntl.h>
+#include <sys/mman.h>
+
+#if !defined(MAP_ANONYMOUS) && defined(MAP_ANON)
+#define MAP_ANONYMOUS MAP_ANON
+#endif
+
+#define MMAP(addr, size, prot, flags) \
+ (mmap((addr), (size), (prot), (flags)|MAP_ANONYMOUS, -1, 0))
+
+
+/* -----------------------  Chunk representations ----------------------- */
+
+
+/*
+  This struct declaration is misleading (but accurate and necessary).
+  It declares a "view" into memory allowing access to necessary
+  fields at known offsets from a given base. See explanation below.
+*/
+
+struct malloc_chunk {
+
+  size_t      prev_size;  /* Size of previous chunk (if free).  */
+  size_t      size;       /* Size in bytes, including overhead. */
+
+  struct malloc_chunk* fd;         /* double links -- used only if free. */
+  struct malloc_chunk* bk;
+};
+
+
+typedef struct malloc_chunk* mchunkptr;
+
+/*
+   malloc_chunk details:
+
+    (The following includes lightly edited explanations by Colin Plumb.)
+
+    Chunks of memory are maintained using a `boundary tag' method as
+    described in e.g., Knuth or Standish.  (See the paper by Paul
+    Wilson ftp://ftp.cs.utexas.edu/pub/garbage/allocsrv.ps for a
+    survey of such techniques.)  Sizes of free chunks are stored both
+    in the front of each chunk and at the end.  This makes
+    consolidating fragmented chunks into bigger chunks very fast.  The
+    size fields also hold bits representing whether chunks are free or
+    in use.
+
+    An allocated chunk looks like this:
+
+
+    chunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+            |             Size of previous chunk, if allocated            | |
+            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+            |             Size of chunk, in bytes                         |P|
+      mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+            |             User data starts here...                          .
+            .                                                               .
+            .             (malloc_usable_space() bytes)                     .
+            .                                                               |
+nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+            |             Size of chunk                                     |
+            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+
+    Where "chunk" is the front of the chunk for the purpose of most of
+    the malloc code, but "mem" is the pointer that is returned to the
+    user.  "Nextchunk" is the beginning of the next contiguous chunk.
+
+    Chunks always begin on even word boundries, so the mem portion
+    (which is returned to the user) is also on an even word boundary, and
+    thus at least double-word aligned.
+
+    Free chunks are stored in circular doubly-linked lists, and look like this:
+
+    chunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+            |             Size of previous chunk                            |
+            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+    `head:' |             Size of chunk, in bytes                         |P|
+      mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+            |             Forward pointer to next chunk in list             |
+            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+            |             Back pointer to previous chunk in list            |
+            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+            |             Unused space (may be 0 bytes long)                .
+            .                                                               .
+            .                                                               |
+nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+    `foot:' |             Size of chunk, in bytes                           |
+            +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+    The P (PREV_INUSE) bit, stored in the unused low-order bit of the
+    chunk size (which is always a multiple of two words), is an in-use
+    bit for the *previous* chunk.  If that bit is *clear*, then the
+    word before the current chunk size contains the previous chunk
+    size, and can be used to find the front of the previous chunk.
+    The very first chunk allocated always has this bit set,
+    preventing access to non-existent (or non-owned) memory. If
+    prev_inuse is set for any given chunk, then you CANNOT determine
+    the size of the previous chunk, and might even get a memory
+    addressing fault when trying to do so.
+
+    Note that the `foot' of the current chunk is actually represented
+    as the prev_size of the NEXT chunk. This makes it easier to
+    deal with alignments etc but can be very confusing when trying
+    to extend or adapt this code.
+
+    The two exceptions to all this are
+
+     1. The special chunk `top' doesn't bother using the
+        trailing size field since there is no next contiguous chunk
+        that would have to index off it. After initialization, `top'
+        is forced to always exist.  If it would become less than
+        MINSIZE bytes long, it is replenished.
+
+     2. Chunks allocated via mmap, which have the second-lowest-order
+        bit (IS_MMAPPED) set in their size fields.  Because they are
+        allocated one-by-one, each must contain its own trailing size field.
+
+*/
+
+/*
+  ---------- Size and alignment checks and conversions ----------
+*/
+
+/* conversion from malloc headers to user pointers, and back */
+
+#define chunk2mem(p)   ((void*)((char*)(p) + 2*(sizeof(size_t))))
+#define mem2chunk(mem) ((mchunkptr)((char*)(mem) - 2*(sizeof(size_t))))
+
+/* The smallest possible chunk */
+#define MIN_CHUNK_SIZE        (sizeof(struct malloc_chunk))
+
+/* The smallest size we can malloc is an aligned minimal chunk */
+
+#define MINSIZE  \
+  (unsigned long)(((MIN_CHUNK_SIZE+MALLOC_ALIGN_MASK) & ~MALLOC_ALIGN_MASK))
+
+/* Check if m has acceptable alignment */
+
+#define aligned_OK(m)  (((unsigned long)((m)) & (MALLOC_ALIGN_MASK)) == 0)
+
+
+/* Check if a request is so large that it would wrap around zero when
+   padded and aligned. To simplify some other code, the bound is made
+   low enough so that adding MINSIZE will also not wrap around sero.
+*/
+
+#define REQUEST_OUT_OF_RANGE(req)                                 \
+  ((unsigned long)(req) >=                                        \
+   (unsigned long)(size_t)(-2 * MINSIZE))
+
+/* pad request bytes into a usable size -- internal version */
+
+#define request2size(req)                                         \
+  (((req) + (sizeof(size_t)) + MALLOC_ALIGN_MASK < MINSIZE)  ?             \
+   MINSIZE :                                                      \
+   ((req) + (sizeof(size_t)) + MALLOC_ALIGN_MASK) & ~MALLOC_ALIGN_MASK)
+
+/*  Same, except also perform argument check */
+
+#define checked_request2size(req, sz)                             \
+  if (REQUEST_OUT_OF_RANGE(req)) {                                \
+    errno = ENOMEM;                                               \
+    return 0;                                                     \
+  }                                                               \
+  (sz) = request2size(req);
+
+/*
+  --------------- Physical chunk operations ---------------
+*/
+
+
+/* size field is or'ed with PREV_INUSE when previous adjacent chunk in use */
+#define PREV_INUSE 0x1
+
+/* extract inuse bit of previous chunk */
+#define prev_inuse(p)       ((p)->size & PREV_INUSE)
+
+
+/* size field is or'ed with IS_MMAPPED if the chunk was obtained with mmap() */
+#define IS_MMAPPED 0x2
+
+/* check for mmap()'ed chunk */
+#define chunk_is_mmapped(p) ((p)->size & IS_MMAPPED)
+
+/* Bits to mask off when extracting size
+
+  Note: IS_MMAPPED is intentionally not masked off from size field in
+  macros for which mmapped chunks should never be seen. This should
+  cause helpful core dumps to occur if it is tried by accident by
+  people extending or adapting this malloc.
+*/
+#define SIZE_BITS (PREV_INUSE|IS_MMAPPED)
+
+/* Get size, ignoring use bits */
+#define chunksize(p)         ((p)->size & ~(SIZE_BITS))
+
+
+/* Ptr to next physical malloc_chunk. */
+#define next_chunk(p) ((mchunkptr)( ((char*)(p)) + ((p)->size & ~PREV_INUSE) ))
+
+/* Ptr to previous physical malloc_chunk */
+#define prev_chunk(p) ((mchunkptr)( ((char*)(p)) - ((p)->prev_size) ))
+
+/* Treat space at ptr + offset as a chunk */
+#define chunk_at_offset(p, s)  ((mchunkptr)(((char*)(p)) + (s)))
+
+/* extract p's inuse bit */
+#define inuse(p)\
+((((mchunkptr)(((char*)(p))+((p)->size & ~PREV_INUSE)))->size) & PREV_INUSE)
+
+/* set/clear chunk as being inuse without otherwise disturbing */
+#define set_inuse(p)\
+((mchunkptr)(((char*)(p)) + ((p)->size & ~PREV_INUSE)))->size |= PREV_INUSE
+
+#define clear_inuse(p)\
+((mchunkptr)(((char*)(p)) + ((p)->size & ~PREV_INUSE)))->size &= ~(PREV_INUSE)
+
+
+/* check/set/clear inuse bits in known places */
+#define inuse_bit_at_offset(p, s)\
+ (((mchunkptr)(((char*)(p)) + (s)))->size & PREV_INUSE)
+
+#define set_inuse_bit_at_offset(p, s)\
+ (((mchunkptr)(((char*)(p)) + (s)))->size |= PREV_INUSE)
+
+#define clear_inuse_bit_at_offset(p, s)\
+ (((mchunkptr)(((char*)(p)) + (s)))->size &= ~(PREV_INUSE))
+
+
+/* Set size at head, without disturbing its use bit */
+#define set_head_size(p, s)  ((p)->size = (((p)->size & PREV_INUSE) | (s)))
+
+/* Set size/use field */
+#define set_head(p, s)       ((p)->size = (s))
+
+/* Set size at footer (only when chunk is not in use) */
+#define set_foot(p, s)       (((mchunkptr)((char*)(p) + (s)))->prev_size = (s))
+
+
+/* -------------------- Internal data structures -------------------- */
+
+/*
+  Bins
+
+    An array of bin headers for free chunks. Each bin is doubly
+    linked.  The bins are approximately proportionally (log) spaced.
+    There are a lot of these bins (128). This may look excessive, but
+    works very well in practice.  Most bins hold sizes that are
+    unusual as malloc request sizes, but are more usual for fragments
+    and consolidated sets of chunks, which is what these bins hold, so
+    they can be found quickly.  All procedures maintain the invariant
+    that no consolidated chunk physically borders another one, so each
+    chunk in a list is known to be preceeded and followed by either
+    inuse chunks or the ends of memory.
+
+    Chunks in bins are kept in size order, with ties going to the
+    approximately least recently used chunk. Ordering isn't needed
+    for the small bins, which all contain the same-sized chunks, but
+    facilitates best-fit allocation for larger chunks. These lists
+    are just sequential. Keeping them in order almost never requires
+    enough traversal to warrant using fancier ordered data
+    structures.
+
+    Chunks of the same size are linked with the most
+    recently freed at the front, and allocations are taken from the
+    back.  This results in LRU (FIFO) allocation order, which tends
+    to give each chunk an equal opportunity to be consolidated with
+    adjacent freed chunks, resulting in larger free chunks and less
+    fragmentation.
+
+    To simplify use in double-linked lists, each bin header acts
+    as a malloc_chunk. This avoids special-casing for headers.
+    But to conserve space and improve locality, we allocate
+    only the fd/bk pointers of bins, and then use repositioning tricks
+    to treat these as the fields of a malloc_chunk*.  
+*/
+
+typedef struct malloc_chunk* mbinptr;
+
+/* addressing -- note that bin_at(0) does not exist */
+#define bin_at(m, i) ((mbinptr)((char*)&((m)->bins[(i)<<1]) - ((sizeof(size_t))<<1)))
+
+/* analog of ++bin */
+#define next_bin(b)  ((mbinptr)((char*)(b) + (sizeof(mchunkptr)<<1)))
+
+/* Reminders about list directionality within bins */
+#define first(b)     ((b)->fd)
+#define last(b)      ((b)->bk)
+
+/* Take a chunk off a bin list */
+#define unlink(P, BK, FD) {                                            \
+  FD = P->fd;                                                          \
+  BK = P->bk;                                                          \
+  FD->bk = BK;                                                         \
+  BK->fd = FD;                                                         \
+}
+
+/*
+  Indexing
+
+    Bins for sizes < 512 bytes contain chunks of all the same size, spaced
+    8 bytes apart. Larger bins are approximately logarithmically spaced:
+
+    64 bins of size       8
+    32 bins of size      64
+    16 bins of size     512
+     8 bins of size    4096
+     4 bins of size   32768
+     2 bins of size  262144
+     1 bin  of size what's left
+
+    The bins top out around 1MB because we expect to service large
+    requests via mmap.
+*/
+
+#define NBINS              96
+#define NSMALLBINS         32
+#define SMALLBIN_WIDTH      8
+#define MIN_LARGE_SIZE    256
+
+#define in_smallbin_range(sz)  \
+  ((unsigned long)(sz) < (unsigned long)MIN_LARGE_SIZE)
+
+#define smallbin_index(sz)     (((unsigned)(sz)) >> 3)
+
+#define bin_index(sz) \
+ ((in_smallbin_range(sz)) ? smallbin_index(sz) : __malloc_largebin_index(sz))
+
+/*
+  FIRST_SORTED_BIN_SIZE is the chunk size corresponding to the
+  first bin that is maintained in sorted order. This must
+  be the smallest size corresponding to a given bin.
+
+  Normally, this should be MIN_LARGE_SIZE. But you can weaken
+  best fit guarantees to sometimes speed up malloc by increasing value.
+  Doing this means that malloc may choose a chunk that is
+  non-best-fitting by up to the width of the bin.
+
+  Some useful cutoff values:
+      512 - all bins sorted
+     2560 - leaves bins <=     64 bytes wide unsorted
+    12288 - leaves bins <=    512 bytes wide unsorted
+    65536 - leaves bins <=   4096 bytes wide unsorted
+   262144 - leaves bins <=  32768 bytes wide unsorted
+       -1 - no bins sorted (not recommended!)
+*/
+
+#define FIRST_SORTED_BIN_SIZE MIN_LARGE_SIZE
+/* #define FIRST_SORTED_BIN_SIZE 65536 */
+
+/*
+  Unsorted chunks
+
+    All remainders from chunk splits, as well as all returned chunks,
+    are first placed in the "unsorted" bin. They are then placed
+    in regular bins after malloc gives them ONE chance to be used before
+    binning. So, basically, the unsorted_chunks list acts as a queue,
+    with chunks being placed on it in free (and __malloc_consolidate),
+    and taken off (to be either used or placed in bins) in malloc.
+*/
+
+/* The otherwise unindexable 1-bin is used to hold unsorted chunks. */
+#define unsorted_chunks(M)          (bin_at(M, 1))
+
+/*
+  Top
+
+    The top-most available chunk (i.e., the one bordering the end of
+    available memory) is treated specially. It is never included in
+    any bin, is used only if no other chunk is available, and is
+    released back to the system if it is very large (see
+    M_TRIM_THRESHOLD).  Because top initially
+    points to its own bin with initial zero size, thus forcing
+    extension on the first malloc request, we avoid having any special
+    code in malloc to check whether it even exists yet. But we still
+    need to do so when getting memory from system, so we make
+    initial_top treat the bin as a legal but unusable chunk during the
+    interval between initialization and the first call to
+    __malloc_alloc. (This is somewhat delicate, since it relies on
+    the 2 preceding words to be zero during this interval as well.)
+*/
+
+/* Conveniently, the unsorted bin can be used as dummy top on first call */
+#define initial_top(M)              (unsorted_chunks(M))
+
+/*
+  Binmap
+
+    To help compensate for the large number of bins, a one-level index
+    structure is used for bin-by-bin searching.  `binmap' is a
+    bitvector recording whether bins are definitely empty so they can
+    be skipped over during during traversals.  The bits are NOT always
+    cleared as soon as bins are empty, but instead only
+    when they are noticed to be empty during traversal in malloc.
+*/
+
+/* Conservatively use 32 bits per map word, even if on 64bit system */
+#define BINMAPSHIFT      5
+#define BITSPERMAP       (1U << BINMAPSHIFT)
+#define BINMAPSIZE       (NBINS / BITSPERMAP)
+
+#define idx2block(i)     ((i) >> BINMAPSHIFT)
+#define idx2bit(i)       ((1U << ((i) & ((1U << BINMAPSHIFT)-1))))
+
+#define mark_bin(m,i)    ((m)->binmap[idx2block(i)] |=  idx2bit(i))
+#define unmark_bin(m,i)  ((m)->binmap[idx2block(i)] &= ~(idx2bit(i)))
+#define get_binmap(m,i)  ((m)->binmap[idx2block(i)] &   idx2bit(i))
+
+/*
+  Fastbins
+
+    An array of lists holding recently freed small chunks.  Fastbins
+    are not doubly linked.  It is faster to single-link them, and
+    since chunks are never removed from the middles of these lists,
+    double linking is not necessary. Also, unlike regular bins, they
+    are not even processed in FIFO order (they use faster LIFO) since
+    ordering doesn't much matter in the transient contexts in which
+    fastbins are normally used.
+
+    Chunks in fastbins keep their inuse bit set, so they cannot
+    be consolidated with other free chunks. __malloc_consolidate
+    releases all chunks in fastbins and consolidates them with
+    other free chunks.
+*/
+
+typedef struct malloc_chunk* mfastbinptr;
+
+/* offset 2 to use otherwise unindexable first 2 bins */
+#define fastbin_index(sz)        ((((unsigned int)(sz)) >> 3) - 2)
+
+/* The maximum fastbin request size we support */
+#define MAX_FAST_SIZE     80
+
+#define NFASTBINS  (fastbin_index(request2size(MAX_FAST_SIZE))+1)
+
+/*
+  FASTBIN_CONSOLIDATION_THRESHOLD is the size of a chunk in free()
+  that triggers automatic consolidation of possibly-surrounding
+  fastbin chunks. This is a heuristic, so the exact value should not
+  matter too much. It is defined at half the default trim threshold as a
+  compromise heuristic to only attempt consolidation if it is likely
+  to lead to trimming. However, it is not dynamically tunable, since
+  consolidation reduces fragmentation surrounding loarge chunks even
+  if trimming is not used.
+*/
+
+#define FASTBIN_CONSOLIDATION_THRESHOLD  \
+  ((unsigned long)(DEFAULT_TRIM_THRESHOLD) >> 1)
+
+/*
+  Since the lowest 2 bits in max_fast don't matter in size comparisons,
+  they are used as flags.
+*/
+
+/*
+  ANYCHUNKS_BIT held in max_fast indicates that there may be any
+  freed chunks at all. It is set true when entering a chunk into any
+  bin.
+*/
+
+#define ANYCHUNKS_BIT        (1U)
+
+#define have_anychunks(M)     (((M)->max_fast &  ANYCHUNKS_BIT))
+#define set_anychunks(M)      ((M)->max_fast |=  ANYCHUNKS_BIT)
+#define clear_anychunks(M)    ((M)->max_fast &= ~ANYCHUNKS_BIT)
+
+/*
+  FASTCHUNKS_BIT held in max_fast indicates that there are probably
+  some fastbin chunks. It is set true on entering a chunk into any
+  fastbin, and cleared only in __malloc_consolidate.
+*/
+
+#define FASTCHUNKS_BIT        (2U)
+
+#define have_fastchunks(M)   (((M)->max_fast &  FASTCHUNKS_BIT))
+#define set_fastchunks(M)    ((M)->max_fast |=  (FASTCHUNKS_BIT|ANYCHUNKS_BIT))
+#define clear_fastchunks(M)  ((M)->max_fast &= ~(FASTCHUNKS_BIT))
+
+/* Set value of max_fast.  Use impossibly small value if 0.  */
+#define set_max_fast(M, s) \
+  (M)->max_fast = (((s) == 0)? SMALLBIN_WIDTH: request2size(s)) | \
+  ((M)->max_fast &  (FASTCHUNKS_BIT|ANYCHUNKS_BIT))
+
+#define get_max_fast(M) \
+  ((M)->max_fast & ~(FASTCHUNKS_BIT | ANYCHUNKS_BIT))
+
+
+/*
+  morecore_properties is a status word holding dynamically discovered
+  or controlled properties of the morecore function
+*/
+
+#define MORECORE_CONTIGUOUS_BIT  (1U)
+
+#define contiguous(M) \
+        (((M)->morecore_properties &  MORECORE_CONTIGUOUS_BIT))
+#define noncontiguous(M) \
+        (((M)->morecore_properties &  MORECORE_CONTIGUOUS_BIT) == 0)
+#define set_contiguous(M) \
+        ((M)->morecore_properties |=  MORECORE_CONTIGUOUS_BIT)
+#define set_noncontiguous(M) \
+        ((M)->morecore_properties &= ~MORECORE_CONTIGUOUS_BIT)
+
+
+/*
+   ----------- Internal state representation and initialization -----------
+*/
+
+struct malloc_state {
+
+  /* The maximum chunk size to be eligible for fastbin */
+  size_t  max_fast;   /* low 2 bits used as flags */
+
+  /* Fastbins */
+  mfastbinptr      fastbins[NFASTBINS];
+
+  /* Base of the topmost chunk -- not otherwise kept in a bin */
+  mchunkptr        top;
+
+  /* The remainder from the most recent split of a small request */
+  mchunkptr        last_remainder;
+
+  /* Normal bins packed as described above */
+  mchunkptr        bins[NBINS * 2];
+
+  /* Bitmap of bins. Trailing zero map handles cases of largest binned size */
+  unsigned int     binmap[BINMAPSIZE+1];
+
+  /* Tunable parameters */
+  unsigned long     trim_threshold;
+  size_t  top_pad;
+  size_t  mmap_threshold;
+
+  /* Memory map support */
+  int              n_mmaps;
+  int              n_mmaps_max;
+  int              max_n_mmaps;
+
+  /* Cache malloc_getpagesize */
+  unsigned int     pagesize;
+
+  /* Track properties of MORECORE */
+  unsigned int     morecore_properties;
+
+  /* Statistics */
+  size_t  mmapped_mem;
+  size_t  sbrked_mem;
+  size_t  max_sbrked_mem;
+  size_t  max_mmapped_mem;
+  size_t  max_total_mem;
+};
+
+typedef struct malloc_state *mstate;
+
+/*
+   There is exactly one instance of this struct in this malloc.
+   If you are adapting this malloc in a way that does NOT use a static
+   malloc_state, you MUST explicitly zero-fill it before using. This
+   malloc relies on the property that malloc_state is initialized to
+   all zeroes (as is true of C statics).
+*/
+extern struct malloc_state __malloc_state;  /* never directly referenced */
+
+/*
+   All uses of av_ are via get_malloc_state().
+   At most one "call" to get_malloc_state is made per invocation of
+   the public versions of malloc and free, but other routines
+   that in turn invoke malloc and/or free may call more then once.
+   Also, it is called in check* routines if __MALLOC_DEBUGGING is set.
+*/
+
+#define get_malloc_state() (&(__malloc_state))
+
+/* External internal utilities operating on mstates */
+void   __malloc_consolidate(mstate);
+
+
+/* Debugging support */
+#if ! __MALLOC_DEBUGGING
+
+#define check_chunk(P)
+#define check_free_chunk(P)
+#define check_inuse_chunk(P)
+#define check_remalloced_chunk(P,N)
+#define check_malloced_chunk(P,N)
+#define check_malloc_state()
+#define assert(x) ((void)0)
+
+
+#else
+
+#define check_chunk(P)              __do_check_chunk(P)
+#define check_free_chunk(P)         __do_check_free_chunk(P)
+#define check_inuse_chunk(P)        __do_check_inuse_chunk(P)
+#define check_remalloced_chunk(P,N) __do_check_remalloced_chunk(P,N)
+#define check_malloced_chunk(P,N)   __do_check_malloced_chunk(P,N)
+#define check_malloc_state()        __do_check_malloc_state()
+
+extern void __do_check_chunk(mchunkptr p);
+extern void __do_check_free_chunk(mchunkptr p);
+extern void __do_check_inuse_chunk(mchunkptr p);
+extern void __do_check_remalloced_chunk(mchunkptr p, size_t s);
+extern void __do_check_malloced_chunk(mchunkptr p, size_t s);
+extern void __do_check_malloc_state(void);
+
+#include <assert.h>
+
+#endif
diff --git a/libc/stdlib/malloc-standard/mallopt.c b/libc/stdlib/malloc-standard/mallopt.c
new file mode 100644
index 000000000..e28792099
--- /dev/null
+++ b/libc/stdlib/malloc-standard/mallopt.c
@@ -0,0 +1,64 @@
+/*
+  This is a version (aka dlmalloc) of malloc/free/realloc written by
+  Doug Lea and released to the public domain.  Use, modify, and
+  redistribute this code without permission or acknowledgement in any
+  way you wish.  Send questions, comments, complaints, performance
+  data, etc to dl@cs.oswego.edu
+
+  VERSION 2.7.2 Sat Aug 17 09:07:30 2002  Doug Lea  (dl at gee)
+
+  Note: There may be an updated version of this malloc obtainable at
+           ftp://gee.cs.oswego.edu/pub/misc/malloc.c
+  Check before installing!
+
+  Hacked up for uClibc by Erik Andersen <andersen@codepoet.org>
+*/
+
+#include "malloc.h"
+
+
+/* ------------------------------ mallopt ------------------------------ */
+int mallopt(int param_number, int value)
+{
+    int ret;
+    mstate av;
+
+    ret = 0;
+
+    LOCK;
+    av = get_malloc_state();
+    /* Ensure initialization/consolidation */
+    __malloc_consolidate(av);
+
+    switch(param_number) {
+	case M_MXFAST:
+	    if (value >= 0 && value <= MAX_FAST_SIZE) {
+		set_max_fast(av, value);
+		ret = 1;
+	    }
+	    break;
+
+	case M_TRIM_THRESHOLD:
+	    av->trim_threshold = value;
+	    ret = 1;
+	    break;
+
+	case M_TOP_PAD:
+	    av->top_pad = value;
+	    ret = 1;
+	    break;
+
+	case M_MMAP_THRESHOLD:
+	    av->mmap_threshold = value;
+	    ret = 1;
+	    break;
+
+	case M_MMAP_MAX:
+	    av->n_mmaps_max = value;
+	    ret = 1;
+	    break;
+    }
+    UNLOCK;
+    return ret;
+}
+
diff --git a/libc/stdlib/malloc-standard/memalign.c b/libc/stdlib/malloc-standard/memalign.c
new file mode 100644
index 000000000..bd9536272
--- /dev/null
+++ b/libc/stdlib/malloc-standard/memalign.c
@@ -0,0 +1,126 @@
+/*
+  This is a version (aka dlmalloc) of malloc/free/realloc written by
+  Doug Lea and released to the public domain.  Use, modify, and
+  redistribute this code without permission or acknowledgement in any
+  way you wish.  Send questions, comments, complaints, performance
+  data, etc to dl@cs.oswego.edu
+
+  VERSION 2.7.2 Sat Aug 17 09:07:30 2002  Doug Lea  (dl at gee)
+
+  Note: There may be an updated version of this malloc obtainable at
+           ftp://gee.cs.oswego.edu/pub/misc/malloc.c
+  Check before installing!
+
+  Hacked up for uClibc by Erik Andersen <andersen@codepoet.org>
+*/
+
+#include <features.h>
+#include <stddef.h>
+#include <unistd.h>
+#include <errno.h>
+#include <string.h>
+#include "malloc.h"
+
+
+/* ------------------------------ memalign ------------------------------ */
+void* memalign(size_t alignment, size_t bytes)
+{
+    size_t nb;             /* padded  request size */
+    char*           m;              /* memory returned by malloc call */
+    mchunkptr       p;              /* corresponding chunk */
+    char*           brk;            /* alignment point within p */
+    mchunkptr       newp;           /* chunk to return */
+    size_t newsize;        /* its size */
+    size_t leadsize;       /* leading space before alignment point */
+    mchunkptr       remainder;      /* spare room at end to split off */
+    unsigned long    remainder_size; /* its size */
+    size_t size;
+
+    /* If need less alignment than we give anyway, just relay to malloc */
+
+    if (alignment <= MALLOC_ALIGNMENT) return malloc(bytes);
+
+    /* Otherwise, ensure that it is at least a minimum chunk size */
+
+    if (alignment <  MINSIZE) alignment = MINSIZE;
+
+    /* Make sure alignment is power of 2 (in case MINSIZE is not).  */
+    if ((alignment & (alignment - 1)) != 0) {
+	size_t a = MALLOC_ALIGNMENT * 2;
+	while ((unsigned long)a < (unsigned long)alignment) a <<= 1;
+	alignment = a;
+    }
+
+    LOCK;
+    checked_request2size(bytes, nb);
+
+    /* Strategy: find a spot within that chunk that meets the alignment
+     * request, and then possibly free the leading and trailing space.  */
+
+
+    /* Call malloc with worst case padding to hit alignment. */
+
+    m  = (char*)(malloc(nb + alignment + MINSIZE));
+
+    if (m == 0) {
+	UNLOCK;
+	return 0; /* propagate failure */
+    }
+
+    p = mem2chunk(m);
+
+    if ((((unsigned long)(m)) % alignment) != 0) { /* misaligned */
+
+	/*
+	   Find an aligned spot inside chunk.  Since we need to give back
+	   leading space in a chunk of at least MINSIZE, if the first
+	   calculation places us at a spot with less than MINSIZE leader,
+	   we can move to the next aligned spot -- we've allocated enough
+	   total room so that this is always possible.
+	   */
+
+	brk = (char*)mem2chunk((unsigned long)(((unsigned long)(m + alignment - 1)) &
+		    -((signed long) alignment)));
+	if ((unsigned long)(brk - (char*)(p)) < MINSIZE)
+	    brk += alignment;
+
+	newp = (mchunkptr)brk;
+	leadsize = brk - (char*)(p);
+	newsize = chunksize(p) - leadsize;
+
+	/* For mmapped chunks, just adjust offset */
+	if (chunk_is_mmapped(p)) {
+	    newp->prev_size = p->prev_size + leadsize;
+	    set_head(newp, newsize|IS_MMAPPED);
+	    UNLOCK;
+	    return chunk2mem(newp);
+	}
+
+	/* Otherwise, give back leader, use the rest */
+	set_head(newp, newsize | PREV_INUSE);
+	set_inuse_bit_at_offset(newp, newsize);
+	set_head_size(p, leadsize);
+	free(chunk2mem(p));
+	p = newp;
+
+	assert (newsize >= nb &&
+		(((unsigned long)(chunk2mem(p))) % alignment) == 0);
+    }
+
+    /* Also give back spare room at the end */
+    if (!chunk_is_mmapped(p)) {
+	size = chunksize(p);
+	if ((unsigned long)(size) > (unsigned long)(nb + MINSIZE)) {
+	    remainder_size = size - nb;
+	    remainder = chunk_at_offset(p, nb);
+	    set_head(remainder, remainder_size | PREV_INUSE);
+	    set_head_size(p, nb);
+	    free(chunk2mem(remainder));
+	}
+    }
+
+    check_inuse_chunk(p);
+    UNLOCK;
+    return chunk2mem(p);
+}
+
diff --git a/libc/stdlib/malloc-standard/realloc.c b/libc/stdlib/malloc-standard/realloc.c
new file mode 100644
index 000000000..195013095
--- /dev/null
+++ b/libc/stdlib/malloc-standard/realloc.c
@@ -0,0 +1,237 @@
+/*
+  This is a version (aka dlmalloc) of malloc/free/realloc written by
+  Doug Lea and released to the public domain.  Use, modify, and
+  redistribute this code without permission or acknowledgement in any
+  way you wish.  Send questions, comments, complaints, performance
+  data, etc to dl@cs.oswego.edu
+
+  VERSION 2.7.2 Sat Aug 17 09:07:30 2002  Doug Lea  (dl at gee)
+
+  Note: There may be an updated version of this malloc obtainable at
+           ftp://gee.cs.oswego.edu/pub/misc/malloc.c
+  Check before installing!
+
+  Hacked up for uClibc by Erik Andersen <andersen@codepoet.org>
+*/
+
+#include "malloc.h"
+
+
+
+/* ------------------------------ realloc ------------------------------ */
+void* realloc(void* oldmem, size_t bytes)
+{
+    mstate av;
+
+    size_t  nb;              /* padded request size */
+
+    mchunkptr        oldp;            /* chunk corresponding to oldmem */
+    size_t  oldsize;         /* its size */
+
+    mchunkptr        newp;            /* chunk to return */
+    size_t  newsize;         /* its size */
+    void*          newmem;          /* corresponding user mem */
+
+    mchunkptr        next;            /* next contiguous chunk after oldp */
+
+    mchunkptr        remainder;       /* extra space at end of newp */
+    unsigned long     remainder_size;  /* its size */
+
+    mchunkptr        bck;             /* misc temp for linking */
+    mchunkptr        fwd;             /* misc temp for linking */
+
+    unsigned long     copysize;        /* bytes to copy */
+    unsigned int     ncopies;         /* size_t words to copy */
+    size_t* s;               /* copy source */
+    size_t* d;               /* copy destination */
+
+
+    /* Check for special cases.  */
+    if (! oldmem)
+	return malloc(bytes);
+    if (! bytes) {
+	free (oldmem);
+	return malloc(bytes);
+    }
+
+    LOCK;
+    av = get_malloc_state();
+    checked_request2size(bytes, nb);
+
+    oldp    = mem2chunk(oldmem);
+    oldsize = chunksize(oldp);
+
+    check_inuse_chunk(oldp);
+
+    if (!chunk_is_mmapped(oldp)) {
+
+	if ((unsigned long)(oldsize) >= (unsigned long)(nb)) {
+	    /* already big enough; split below */
+	    newp = oldp;
+	    newsize = oldsize;
+	}
+
+	else {
+	    next = chunk_at_offset(oldp, oldsize);
+
+	    /* Try to expand forward into top */
+	    if (next == av->top &&
+		    (unsigned long)(newsize = oldsize + chunksize(next)) >=
+		    (unsigned long)(nb + MINSIZE)) {
+		set_head_size(oldp, nb);
+		av->top = chunk_at_offset(oldp, nb);
+		set_head(av->top, (newsize - nb) | PREV_INUSE);
+		UNLOCK;
+		return chunk2mem(oldp);
+	    }
+
+	    /* Try to expand forward into next chunk;  split off remainder below */
+	    else if (next != av->top &&
+		    !inuse(next) &&
+		    (unsigned long)(newsize = oldsize + chunksize(next)) >=
+		    (unsigned long)(nb)) {
+		newp = oldp;
+		unlink(next, bck, fwd);
+	    }
+
+	    /* allocate, copy, free */
+	    else {
+		newmem = malloc(nb - MALLOC_ALIGN_MASK);
+		if (newmem == 0) {
+		    UNLOCK;
+		    return 0; /* propagate failure */
+		}
+
+		newp = mem2chunk(newmem);
+		newsize = chunksize(newp);
+
+		/*
+		   Avoid copy if newp is next chunk after oldp.
+		   */
+		if (newp == next) {
+		    newsize += oldsize;
+		    newp = oldp;
+		}
+		else {
+		    /*
+		       Unroll copy of <= 36 bytes (72 if 8byte sizes)
+		       We know that contents have an odd number of
+		       size_t-sized words; minimally 3.
+		       */
+
+		    copysize = oldsize - (sizeof(size_t));
+		    s = (size_t*)(oldmem);
+		    d = (size_t*)(newmem);
+		    ncopies = copysize / sizeof(size_t);
+		    assert(ncopies >= 3);
+
+		    if (ncopies > 9)
+			memcpy(d, s, copysize);
+
+		    else {
+			*(d+0) = *(s+0);
+			*(d+1) = *(s+1);
+			*(d+2) = *(s+2);
+			if (ncopies > 4) {
+			    *(d+3) = *(s+3);
+			    *(d+4) = *(s+4);
+			    if (ncopies > 6) {
+				*(d+5) = *(s+5);
+				*(d+6) = *(s+6);
+				if (ncopies > 8) {
+				    *(d+7) = *(s+7);
+				    *(d+8) = *(s+8);
+				}
+			    }
+			}
+		    }
+
+		    free(oldmem);
+		    check_inuse_chunk(newp);
+		    UNLOCK;
+		    return chunk2mem(newp);
+		}
+	    }
+	}
+
+	/* If possible, free extra space in old or extended chunk */
+
+	assert((unsigned long)(newsize) >= (unsigned long)(nb));
+
+	remainder_size = newsize - nb;
+
+	if (remainder_size < MINSIZE) { /* not enough extra to split off */
+	    set_head_size(newp, newsize);
+	    set_inuse_bit_at_offset(newp, newsize);
+	}
+	else { /* split remainder */
+	    remainder = chunk_at_offset(newp, nb);
+	    set_head_size(newp, nb);
+	    set_head(remainder, remainder_size | PREV_INUSE);
+	    /* Mark remainder as inuse so free() won't complain */
+	    set_inuse_bit_at_offset(remainder, remainder_size);
+	    free(chunk2mem(remainder));
+	}
+
+	check_inuse_chunk(newp);
+	UNLOCK;
+	return chunk2mem(newp);
+    }
+
+    /*
+       Handle mmap cases
+       */
+
+    else {
+	size_t offset = oldp->prev_size;
+	size_t pagemask = av->pagesize - 1;
+	char *cp;
+	unsigned long  sum;
+
+	/* Note the extra (sizeof(size_t)) overhead */
+	newsize = (nb + offset + (sizeof(size_t)) + pagemask) & ~pagemask;
+
+	/* don't need to remap if still within same page */
+	if (oldsize == newsize - offset) {
+	    UNLOCK;
+	    return oldmem;
+	}
+
+	cp = (char*)mremap((char*)oldp - offset, oldsize + offset, newsize, 1);
+
+	if (cp != (char*)MORECORE_FAILURE) {
+
+	    newp = (mchunkptr)(cp + offset);
+	    set_head(newp, (newsize - offset)|IS_MMAPPED);
+
+	    assert(aligned_OK(chunk2mem(newp)));
+	    assert((newp->prev_size == offset));
+
+	    /* update statistics */
+	    sum = av->mmapped_mem += newsize - oldsize;
+	    if (sum > (unsigned long)(av->max_mmapped_mem))
+		av->max_mmapped_mem = sum;
+	    sum += av->sbrked_mem;
+	    if (sum > (unsigned long)(av->max_total_mem))
+		av->max_total_mem = sum;
+
+	    UNLOCK;
+	    return chunk2mem(newp);
+	}
+
+	/* Note the extra (sizeof(size_t)) overhead. */
+	if ((unsigned long)(oldsize) >= (unsigned long)(nb + (sizeof(size_t))))
+	    newmem = oldmem; /* do nothing */
+	else {
+	    /* Must alloc, copy, free. */
+	    newmem = malloc(nb - MALLOC_ALIGN_MASK);
+	    if (newmem != 0) {
+		memcpy(newmem, oldmem, oldsize - 2*(sizeof(size_t)));
+		free(oldmem);
+	    }
+	}
+	UNLOCK;
+	return newmem;
+    }
+}
+
diff --git a/libc/stdlib/malloc/Makefile b/libc/stdlib/malloc/Makefile
index 7172198f2..ce789f8e8 100644
--- a/libc/stdlib/malloc/Makefile
+++ b/libc/stdlib/malloc/Makefile
@@ -24,8 +24,7 @@
 TOPDIR=../../../
 include $(TOPDIR)Rules.mak
 
-# calloc.c can be found at uClibc/libc/stdlib/calloc.c 
-CSRC = malloc.c free.c realloc.c memalign.c \
+CSRC = malloc.c calloc.c free.c realloc.c memalign.c \
 	heap_alloc.c heap_alloc_at.c heap_free.c
 
 # Turn on malloc debugging if requested
diff --git a/libc/stdlib/calloc.c b/libc/stdlib/malloc/calloc.c
index 15281a97f..15281a97f 100644
--- a/libc/stdlib/calloc.c
+++ b/libc/stdlib/malloc/calloc.c