path: root/target/mips/mikrotik-rb4xx/patches/3.14.17/0001-mtd-add-rb4xx-nand-driver.patch

From 1e692cc0c53202b932eedabd0315107910c5b093 Mon Sep 17 00:00:00 2001
From: Phil Sutter <phil@nwl.cc>
Date: Tue, 13 May 2014 00:08:54 +0200
Subject: [PATCH] mtd: add rb4xx nand driver

---
 drivers/mtd/nand/Kconfig      |   4 +
 drivers/mtd/nand/Makefile     |   1 +
 drivers/mtd/nand/rb4xx_nand.c | 305 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 310 insertions(+)
 create mode 100644 drivers/mtd/nand/rb4xx_nand.c

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 90ff447..bb01309 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -510,4 +510,8 @@ config MTD_NAND_XWAY
 	  Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
 	  to the External Bus Unit (EBU).
 
+config MTD_NAND_RB4XX
+	tristate "NAND flash driver for RouterBoard 4xx series"
+	depends on MTD_NAND && ATH79_MACH_RB4XX
+
 endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 542b568..e2b5e1c 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
 obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
 obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
+obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
 obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
 obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
 obj-$(CONFIG_MTD_NAND_FSL_ELBC)		+= fsl_elbc_nand.o
diff --git a/drivers/mtd/nand/rb4xx_nand.c b/drivers/mtd/nand/rb4xx_nand.c
new file mode 100644
index 0000000..5b9841b
--- /dev/null
+++ b/drivers/mtd/nand/rb4xx_nand.c
@@ -0,0 +1,305 @@
+/*
+ *  NAND flash driver for the MikroTik RouterBoard 4xx series
+ *
+ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This file was based on the driver for Linux 2.6.22 published by
+ *  MikroTik for their RouterBoard 4xx series devices.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/rb4xx_cpld.h>
+
+#define DRV_NAME        "rb4xx-nand"
+#define DRV_VERSION     "0.2.0"
+#define DRV_DESC        "NAND flash driver for RouterBoard 4xx series"
+
+#define RB4XX_NAND_GPIO_READY	5
+#define RB4XX_NAND_GPIO_ALE	37
+#define RB4XX_NAND_GPIO_CLE	38
+#define RB4XX_NAND_GPIO_NCE	39
+
+struct rb4xx_nand_info {
+	struct nand_chip	chip;
+	struct mtd_info		mtd;
+};
+
+/*
+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
+ * will not be able to find the kernel that we load.
+ */
+static struct nand_ecclayout rb4xx_nand_ecclayout = {
+	.eccbytes	= 6,
+	.eccpos		= { 8, 9, 10, 13, 14, 15 },
+	.oobavail	= 9,
+	.oobfree	= { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
+};
+
+static struct mtd_partition rb4xx_nand_partitions[] = {
+	{
+		.name	= "booter",
+		.offset	= 0,
+		.size	= (256 * 1024),
+		.mask_flags = MTD_WRITEABLE,
+	},
+	{
+		.name	= "kernel",
+		.offset	= (256 * 1024),
+		.size	= (4 * 1024 * 1024) - (256 * 1024),
+	},
+	{
+		.name	= "rootfs",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static int rb4xx_nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value_cansleep(RB4XX_NAND_GPIO_READY);
+}
+
+static void rb4xx_nand_write_cmd(unsigned char cmd)
+{
+	unsigned char data = cmd;
+	int err;
+
+	err = rb4xx_cpld_write(&data, 1);
+	if (err)
+		pr_err("rb4xx_nand: write cmd failed, err=%d\n", err);
+}
+
+static void rb4xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+				unsigned int ctrl)
+{
+	if (ctrl & NAND_CTRL_CHANGE) {
+		gpio_set_value_cansleep(RB4XX_NAND_GPIO_CLE,
+					(ctrl & NAND_CLE) ? 1 : 0);
+		gpio_set_value_cansleep(RB4XX_NAND_GPIO_ALE,
+					(ctrl & NAND_ALE) ? 1 : 0);
+		gpio_set_value_cansleep(RB4XX_NAND_GPIO_NCE,
+					(ctrl & NAND_NCE) ? 0 : 1);
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		rb4xx_nand_write_cmd(cmd);
+}
+
+static unsigned char rb4xx_nand_read_byte(struct mtd_info *mtd)
+{
+	unsigned char data = 0;
+	int err;
+
+	err = rb4xx_cpld_read(&data, NULL, 1);
+	if (err) {
+		pr_err("rb4xx_nand: read data failed, err=%d\n", err);
+		data = 0xff;
+	}
+
+	return data;
+}
+
+static void rb4xx_nand_write_buf(struct mtd_info *mtd, const unsigned char *buf,
+				 int len)
+{
+	int err;
+
+	err = rb4xx_cpld_write(buf, len);
+	if (err)
+		pr_err("rb4xx_nand: write buf failed, err=%d\n", err);
+}
+
+static void rb4xx_nand_read_buf(struct mtd_info *mtd, unsigned char *buf,
+				int len)
+{
+	int err;
+
+	err = rb4xx_cpld_read(buf, NULL, len);
+	if (err)
+		pr_err("rb4xx_nand: read buf failed, err=%d\n", err);
+}
+
+static int rb4xx_nand_probe(struct platform_device *pdev)
+{
+	struct rb4xx_nand_info	*info;
+	int ret;
+
+	printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
+
+	ret = gpio_request(RB4XX_NAND_GPIO_READY, "NAND RDY");
+	if (ret) {
+		dev_err(&pdev->dev, "unable to request gpio %d\n",
+			RB4XX_NAND_GPIO_READY);
+		goto err;
+	}
+
+	ret = gpio_direction_input(RB4XX_NAND_GPIO_READY);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to set input mode on gpio %d\n",
+			RB4XX_NAND_GPIO_READY);
+		goto err_free_gpio_ready;
+	}
+
+	ret = gpio_request(RB4XX_NAND_GPIO_ALE, "NAND ALE");
+	if (ret) {
+		dev_err(&pdev->dev, "unable to request gpio %d\n",
+			RB4XX_NAND_GPIO_ALE);
+		goto err_free_gpio_ready;
+	}
+
+	ret = gpio_direction_output(RB4XX_NAND_GPIO_ALE, 0);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to set output mode on gpio %d\n",
+			RB4XX_NAND_GPIO_ALE);
+		goto err_free_gpio_ale;
+	}
+
+	ret = gpio_request(RB4XX_NAND_GPIO_CLE, "NAND CLE");
+	if (ret) {
+		dev_err(&pdev->dev, "unable to request gpio %d\n",
+			RB4XX_NAND_GPIO_CLE);
+		goto err_free_gpio_ale;
+	}
+
+	ret = gpio_direction_output(RB4XX_NAND_GPIO_CLE, 0);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to set output mode on gpio %d\n",
+			RB4XX_NAND_GPIO_CLE);
+		goto err_free_gpio_cle;
+	}
+
+	ret = gpio_request(RB4XX_NAND_GPIO_NCE, "NAND NCE");
+	if (ret) {
+		dev_err(&pdev->dev, "unable to request gpio %d\n",
+			RB4XX_NAND_GPIO_NCE);
+		goto err_free_gpio_cle;
+	}
+
+	ret = gpio_direction_output(RB4XX_NAND_GPIO_NCE, 1);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to set output mode on gpio %d\n",
+			RB4XX_NAND_GPIO_ALE);
+		goto err_free_gpio_nce;
+	}
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		dev_err(&pdev->dev, "rb4xx-nand: no memory for private data\n");
+		ret = -ENOMEM;
+		goto err_free_gpio_nce;
+	}
+
+	info->chip.priv	= &info;
+	info->mtd.priv	= &info->chip;
+	info->mtd.owner	= THIS_MODULE;
+
+	info->chip.cmd_ctrl	= rb4xx_nand_cmd_ctrl;
+	info->chip.dev_ready	= rb4xx_nand_dev_ready;
+	info->chip.read_byte	= rb4xx_nand_read_byte;
+	info->chip.write_buf	= rb4xx_nand_write_buf;
+	info->chip.read_buf	= rb4xx_nand_read_buf;
+
+	info->chip.chip_delay	= 25;
+	info->chip.ecc.mode	= NAND_ECC_SOFT;
+
+	platform_set_drvdata(pdev, info);
+
+	ret = nand_scan_ident(&info->mtd, 1, NULL);
+	if (ret) {
+		ret = -ENXIO;
+		goto err_free_info;
+	}
+
+	if (info->mtd.writesize == 512)
+		info->chip.ecc.layout = &rb4xx_nand_ecclayout;
+
+	ret = nand_scan_tail(&info->mtd);
+	if (ret) {
+		return -ENXIO;
+		goto err_set_drvdata;
+	}
+
+	mtd_device_register(&info->mtd, rb4xx_nand_partitions,
+				ARRAY_SIZE(rb4xx_nand_partitions));
+	if (ret)
+		goto err_release_nand;
+
+	return 0;
+
+err_release_nand:
+	nand_release(&info->mtd);
+err_set_drvdata:
+	platform_set_drvdata(pdev, NULL);
+err_free_info:
+	kfree(info);
+err_free_gpio_nce:
+	gpio_free(RB4XX_NAND_GPIO_NCE);
+err_free_gpio_cle:
+	gpio_free(RB4XX_NAND_GPIO_CLE);
+err_free_gpio_ale:
+	gpio_free(RB4XX_NAND_GPIO_ALE);
+err_free_gpio_ready:
+	gpio_free(RB4XX_NAND_GPIO_READY);
+err:
+	return ret;
+}
+
+static int rb4xx_nand_remove(struct platform_device *pdev)
+{
+	struct rb4xx_nand_info *info = platform_get_drvdata(pdev);
+
+	nand_release(&info->mtd);
+	platform_set_drvdata(pdev, NULL);
+	kfree(info);
+	gpio_free(RB4XX_NAND_GPIO_NCE);
+	gpio_free(RB4XX_NAND_GPIO_CLE);
+	gpio_free(RB4XX_NAND_GPIO_ALE);
+	gpio_free(RB4XX_NAND_GPIO_READY);
+
+	return 0;
+}
+
+static struct platform_driver rb4xx_nand_driver = {
+	.probe	= rb4xx_nand_probe,
+	.remove	= rb4xx_nand_remove,
+	.driver	= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init rb4xx_nand_init(void)
+{
+	return platform_driver_register(&rb4xx_nand_driver);
+}
+
+static void __exit rb4xx_nand_exit(void)
+{
+	platform_driver_unregister(&rb4xx_nand_driver);
+}
+
+module_init(rb4xx_nand_init);
+module_exit(rb4xx_nand_exit);
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
+MODULE_LICENSE("GPL v2");
-- 
1.8.5.3