diff options
Diffstat (limited to 'target/waldux/config/Config.in.bluetooth')
| -rw-r--r-- | target/waldux/config/Config.in.bluetooth | 186 |
1 files changed, 0 insertions, 186 deletions
diff --git a/target/waldux/config/Config.in.bluetooth b/target/waldux/config/Config.in.bluetooth deleted file mode 100644 index 8c533b866..000000000 --- a/target/waldux/config/Config.in.bluetooth +++ /dev/null @@ -1,186 +0,0 @@ -# This file is part of the OpenADK project. OpenADK is copyrighted -# material, please see the LICENCE file in the top-level directory. - -menu "Bluetooth support and drivers" -depends on ADK_TARGET_WITH_USB \ - || ADK_TARGET_WITH_MINIPCI \ - || ADK_TARGET_WITH_SDIO \ - || ADK_TARGET_GENERIC - -config ADK_WALDUX_KERNEL_BT_BREDR - bool - -config ADK_WALDUX_KERNEL_BT_BCM - tristate - -config ADK_WALDUX_KERNEL_BT - tristate "Bluetooth network stack" - select ADK_WALDUX_KERNEL_BT_BREDR - default n - help - Bluetooth is low-cost, low-power, short-range wireless technology. - It was designed as a replacement for cables and other short-range - technologies like IrDA. Bluetooth operates in personal area range - that typically extends up to 10 meters. More information about - Bluetooth can be found at <http://www.bluetooth.com/>. - - Linux Bluetooth subsystem consist of several layers: - Bluetooth Core (HCI device and connection manager, scheduler) - HCI Device drivers (Interface to the hardware) - SCO Module (SCO audio links) - L2CAP Module (Logical Link Control and Adaptation Protocol) - RFCOMM Module (RFCOMM Protocol) - BNEP Module (Bluetooth Network Encapsulation Protocol) - CMTP Module (CAPI Message Transport Protocol) - HIDP Module (Human Interface Device Protocol) - -config ADK_WALDUX_KERNEL_BT_L2CAP - bool "L2CAP protocol support" - select ADK_WALDUX_KERNEL_BT - default n - help - L2CAP (Logical Link Control and Adaptation Protocol) provides - connection oriented and connection-less data transport. L2CAP - support is required for most Bluetooth applications. - -config ADK_WALDUX_KERNEL_BT_SCO - bool "SCO link support" - select ADK_WALDUX_KERNEL_BT - default n - help - SCO link provides voice transport over Bluetooth. SCO support is - required for voice applications like Headset and Audio. - -config ADK_WALDUX_KERNEL_BT_RFCOMM - tristate "RFCOMM protocol support" - select ADK_WALDUX_KERNEL_BT - depends on ADK_WALDUX_KERNEL_BT_L2CAP - default n - help - RFCOMM provides connection oriented stream transport. RFCOMM - support is required for Dialup Networking, OBEX and other Bluetooth - applications. - -config ADK_WALDUX_KERNEL_BT_BNEP - tristate "BNEP protocol support" - select ADK_WALDUX_KERNEL_BT - depends on ADK_WALDUX_KERNEL_BT_L2CAP - default n - help - BNEP (Bluetooth Network Encapsulation Protocol) is Ethernet - emulation layer on top of Bluetooth. BNEP is required for - Bluetooth PAN (Personal Area Network). - -config ADK_WALDUX_KERNEL_BT_HIDP - tristate "HIDP protocol support" - select ADK_WALDUX_KERNEL_INPUT - select ADK_WALDUX_KERNEL_HID - select ADK_WALDUX_KERNEL_BT - depends on ADK_WALDUX_KERNEL_BT_L2CAP - default n - help - HIDP (Human Interface Device Protocol) is a transport layer - for HID reports. HIDP is required for the Bluetooth Human - Interface Device Profile. - -config ADK_WALDUX_KERNEL_BT_HCIBTSDIO - tristate "HCI SDIO driver" - select ADK_WALDUX_KERNEL_BT - depends on ADK_TARGET_WITH_SDIO - default n - help - Bluetooth HCI SDIO driver. - This driver is required if you want to use Bluetooth devices with - SDIO interface. - -config ADK_WALDUX_KERNEL_BT_HCIBTUSB - tristate "HCI USB driver" - select ADK_WALDUX_KERNEL_BT - depends on ADK_TARGET_WITH_USB - default n - help - Bluetooth HCI USB driver. - This driver is required if you want to use Bluetooth devices with - USB interface. - -config ADK_WALDUX_KERNEL_BT_HCIBTUSB_BCM - bool "Broadcom protocol support" - depends on ADK_WALDUX_KERNEL_BT_HCIBTUSB - select ADK_WALDUX_KERNEL_BT_BCM - help - The Broadcom protocol support enables firmware and patchram - download support for Broadcom Bluetooth controllers. - -config ADK_WALDUX_KERNEL_BT_HCIUART - tristate "HCI UART driver" - select ADK_WALDUX_KERNEL_BT - default n - help - Bluetooth HCI UART driver. - This driver is required if you want to use Bluetooth devices with - serial port interface. You will also need this driver if you have - UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card - adapter and BrainBoxes Bluetooth PC Card. - -config ADK_WALDUX_KERNEL_BT_HCIUART_H4 - bool - depends on ADK_WALDUX_KERNEL_BT_HCIUART - default n - -config ADK_WALDUX_KERNEL_BT_HCIUART_3WIRE - bool - depends on ADK_WALDUX_KERNEL_BT_HCIUART - default n - -config ADK_WALDUX_KERNEL_BT_HCIUART_BCM - tristate "Broadcom protocol support" - select ADK_WALDUX_KERNEL_BT_HCIUART - select ADK_WALDUX_KERNEL_BT_HCIUART_3WIRE - select ADK_WALDUX_KERNEL_BT_BCM - depends on ADK_TARGET_SYSTEM_RASPBERRY_PI3 - depends on ADK_TARGET_SYSTEM_RASPBERRY_PI3P - default n - help - The Broadcom protocol support enables Bluetooth HCI over serial - port interface for Broadcom Bluetooth controllers. - -config ADK_WALDUX_KERNEL_BT_MRVL - tristate "Marvell driver" - select ADK_WALDUX_KERNEL_BT - default n - help - Bluetooth Marvell driver. - -config ADK_WALDUX_KERNEL_BT_MRVL_SDIO - tristate "Marvell SDIO driver" - select ADK_PACKAGE_BRCM_BLUETOOTH - select ADK_WALDUX_KERNEL_BT_MRVL - select ADK_WALDUX_KERNEL_BT_HCIBTSDIO - depends on ADK_TARGET_WITH_SDIO - default n - help - Bluetooth Marvell driver. - -config ADK_WALDUX_KERNEL_BT_HCIBCM203X - tristate "HCI BCM203x USB driver" - select ADK_WALDUX_KERNEL_FW_LOADER - select ADK_WALDUX_KERNEL_BT_HCIBTUSB - select ADK_WALDUX_KERNEL_BT - depends on ADK_TARGET_WITH_USB - default n - help - Bluetooth HCI BCM203x USB driver. - This driver provides the firmware loading mechanism for the Broadcom - Blutonium based devices. - -config ADK_WALDUX_KERNEL_BT_HCIBPA10X - tristate "HCI BPA10x USB driver" - select ADK_WALDUX_KERNEL_BT - select ADK_WALDUX_KERNEL_BT_HCIBTUSB - default n - help - Bluetooth HCI BPA10x USB driver. - This driver provides support for the Digianswer BPA 100/105 Bluetooth - sniffer devices. - -endmenu |