diff options
Diffstat (limited to 'target/linux/patches/2.6.30.1/ocf.patch')
| -rw-r--r-- | target/linux/patches/2.6.30.1/ocf.patch | 23653 |
1 files changed, 0 insertions, 23653 deletions
diff --git a/target/linux/patches/2.6.30.1/ocf.patch b/target/linux/patches/2.6.30.1/ocf.patch deleted file mode 100644 index 64c5eeb0f..000000000 --- a/target/linux/patches/2.6.30.1/ocf.patch +++ /dev/null @@ -1,23653 +0,0 @@ -diff -Nur linux-2.6.30.orig/crypto/Kconfig linux-2.6.30/crypto/Kconfig ---- linux-2.6.30.orig/crypto/Kconfig 2009-06-10 05:05:27.000000000 +0200 -+++ linux-2.6.30/crypto/Kconfig 2009-06-11 10:55:27.000000000 +0200 -@@ -781,3 +781,5 @@ - source "drivers/crypto/Kconfig" - - endif # if CRYPTO -+ -+source "crypto/ocf/Kconfig" -diff -Nur linux-2.6.30.orig/crypto/Makefile linux-2.6.30/crypto/Makefile ---- linux-2.6.30.orig/crypto/Makefile 2009-06-10 05:05:27.000000000 +0200 -+++ linux-2.6.30/crypto/Makefile 2009-06-11 10:55:27.000000000 +0200 -@@ -84,6 +84,8 @@ - obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_cprng.o - obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o - -+obj-$(CONFIG_OCF_OCF) += ocf/ -+ - # - # generic algorithms and the async_tx api - # -diff -Nur linux-2.6.30.orig/crypto/ocf/Config.in linux-2.6.30/crypto/ocf/Config.in ---- linux-2.6.30.orig/crypto/ocf/Config.in 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/Config.in 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,34 @@ -+############################################################################# -+ -+mainmenu_option next_comment -+comment 'OCF Configuration' -+tristate 'OCF (Open Cryptograhic Framework)' CONFIG_OCF_OCF -+dep_mbool ' enable fips RNG checks (fips check on RNG data before use)' \ -+ CONFIG_OCF_FIPS $CONFIG_OCF_OCF -+dep_mbool ' enable harvesting entropy for /dev/random' \ -+ CONFIG_OCF_RANDOMHARVEST $CONFIG_OCF_OCF -+dep_tristate ' cryptodev (user space support)' \ -+ CONFIG_OCF_CRYPTODEV $CONFIG_OCF_OCF -+dep_tristate ' cryptosoft (software crypto engine)' \ -+ CONFIG_OCF_CRYPTOSOFT $CONFIG_OCF_OCF -+dep_tristate ' safenet (HW crypto engine)' \ -+ CONFIG_OCF_SAFE $CONFIG_OCF_OCF -+dep_tristate ' IXP4xx (HW crypto engine)' \ -+ CONFIG_OCF_IXP4XX $CONFIG_OCF_OCF -+dep_mbool ' Enable IXP4xx HW to perform SHA1 and MD5 hashing (very slow)' \ -+ CONFIG_OCF_IXP4XX_SHA1_MD5 $CONFIG_OCF_IXP4XX -+dep_tristate ' hifn (HW crypto engine)' \ -+ CONFIG_OCF_HIFN $CONFIG_OCF_OCF -+dep_tristate ' talitos (HW crypto engine)' \ -+ CONFIG_OCF_TALITOS $CONFIG_OCF_OCF -+dep_tristate ' pasemi (HW crypto engine)' \ -+ CONFIG_OCF_PASEMI $CONFIG_OCF_OCF -+dep_tristate ' ep80579 (HW crypto engine)' \ -+ CONFIG_OCF_EP80579 $CONFIG_OCF_OCF -+dep_tristate ' ocfnull (does no crypto)' \ -+ CONFIG_OCF_OCFNULL $CONFIG_OCF_OCF -+dep_tristate ' ocf-bench (HW crypto in-kernel benchmark)' \ -+ CONFIG_OCF_BENCH $CONFIG_OCF_OCF -+endmenu -+ -+############################################################################# -diff -Nur linux-2.6.30.orig/crypto/ocf/criov.c linux-2.6.30/crypto/ocf/criov.c ---- linux-2.6.30.orig/crypto/ocf/criov.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/criov.c 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,215 @@ -+/* $OpenBSD: criov.c,v 1.9 2002/01/29 15:48:29 jason Exp $ */ -+ -+/* -+ * Linux port done by David McCullough <david_mccullough@securecomputing.com> -+ * Copyright (C) 2006-2007 David McCullough -+ * Copyright (C) 2004-2005 Intel Corporation. -+ * The license and original author are listed below. -+ * -+ * Copyright (c) 1999 Theo de Raadt -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The name of the author may not be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+__FBSDID("$FreeBSD: src/sys/opencrypto/criov.c,v 1.5 2006/06/04 22:15:13 pjd Exp $"); -+ */ -+ -+#ifndef AUTOCONF_INCLUDED -+#include <linux/config.h> -+#endif -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/slab.h> -+#include <linux/uio.h> -+#include <linux/skbuff.h> -+#include <linux/kernel.h> -+#include <linux/mm.h> -+#include <asm/io.h> -+ -+#include <uio.h> -+#include <cryptodev.h> -+ -+/* -+ * This macro is only for avoiding code duplication, as we need to skip -+ * given number of bytes in the same way in three functions below. -+ */ -+#define CUIO_SKIP() do { \ -+ KASSERT(off >= 0, ("%s: off %d < 0", __func__, off)); \ -+ KASSERT(len >= 0, ("%s: len %d < 0", __func__, len)); \ -+ while (off > 0) { \ -+ KASSERT(iol >= 0, ("%s: empty in skip", __func__)); \ -+ if (off < iov->iov_len) \ -+ break; \ -+ off -= iov->iov_len; \ -+ iol--; \ -+ iov++; \ -+ } \ -+} while (0) -+ -+void -+cuio_copydata(struct uio* uio, int off, int len, caddr_t cp) -+{ -+ struct iovec *iov = uio->uio_iov; -+ int iol = uio->uio_iovcnt; -+ unsigned count; -+ -+ CUIO_SKIP(); -+ while (len > 0) { -+ KASSERT(iol >= 0, ("%s: empty", __func__)); -+ count = min((int)(iov->iov_len - off), len); -+ memcpy(cp, ((caddr_t)iov->iov_base) + off, count); -+ len -= count; -+ cp += count; -+ off = 0; -+ iol--; -+ iov++; -+ } -+} -+ -+void -+cuio_copyback(struct uio* uio, int off, int len, caddr_t cp) -+{ -+ struct iovec *iov = uio->uio_iov; -+ int iol = uio->uio_iovcnt; -+ unsigned count; -+ -+ CUIO_SKIP(); -+ while (len > 0) { -+ KASSERT(iol >= 0, ("%s: empty", __func__)); -+ count = min((int)(iov->iov_len - off), len); -+ memcpy(((caddr_t)iov->iov_base) + off, cp, count); -+ len -= count; -+ cp += count; -+ off = 0; -+ iol--; -+ iov++; -+ } -+} -+ -+/* -+ * Return a pointer to iov/offset of location in iovec list. -+ */ -+struct iovec * -+cuio_getptr(struct uio *uio, int loc, int *off) -+{ -+ struct iovec *iov = uio->uio_iov; -+ int iol = uio->uio_iovcnt; -+ -+ while (loc >= 0) { -+ /* Normal end of search */ -+ if (loc < iov->iov_len) { -+ *off = loc; -+ return (iov); -+ } -+ -+ loc -= iov->iov_len; -+ if (iol == 0) { -+ if (loc == 0) { -+ /* Point at the end of valid data */ -+ *off = iov->iov_len; -+ return (iov); -+ } else -+ return (NULL); -+ } else { -+ iov++, iol--; -+ } -+ } -+ -+ return (NULL); -+} -+ -+EXPORT_SYMBOL(cuio_copyback); -+EXPORT_SYMBOL(cuio_copydata); -+EXPORT_SYMBOL(cuio_getptr); -+ -+ -+static void -+skb_copy_bits_back(struct sk_buff *skb, int offset, caddr_t cp, int len) -+{ -+ int i; -+ if (offset < skb_headlen(skb)) { -+ memcpy(skb->data + offset, cp, min_t(int, skb_headlen(skb), len)); -+ len -= skb_headlen(skb); -+ cp += skb_headlen(skb); -+ } -+ offset -= skb_headlen(skb); -+ for (i = 0; len > 0 && i < skb_shinfo(skb)->nr_frags; i++) { -+ if (offset < skb_shinfo(skb)->frags[i].size) { -+ memcpy(page_address(skb_shinfo(skb)->frags[i].page) + -+ skb_shinfo(skb)->frags[i].page_offset, -+ cp, min_t(int, skb_shinfo(skb)->frags[i].size, len)); -+ len -= skb_shinfo(skb)->frags[i].size; -+ cp += skb_shinfo(skb)->frags[i].size; -+ } -+ offset -= skb_shinfo(skb)->frags[i].size; -+ } -+} -+ -+void -+crypto_copyback(int flags, caddr_t buf, int off, int size, caddr_t in) -+{ -+ -+ if ((flags & CRYPTO_F_SKBUF) != 0) -+ skb_copy_bits_back((struct sk_buff *)buf, off, in, size); -+ else if ((flags & CRYPTO_F_IOV) != 0) -+ cuio_copyback((struct uio *)buf, off, size, in); -+ else -+ bcopy(in, buf + off, size); -+} -+ -+void -+crypto_copydata(int flags, caddr_t buf, int off, int size, caddr_t out) -+{ -+ -+ if ((flags & CRYPTO_F_SKBUF) != 0) -+ skb_copy_bits((struct sk_buff *)buf, off, out, size); -+ else if ((flags & CRYPTO_F_IOV) != 0) -+ cuio_copydata((struct uio *)buf, off, size, out); -+ else -+ bcopy(buf + off, out, size); -+} -+ -+int -+crypto_apply(int flags, caddr_t buf, int off, int len, -+ int (*f)(void *, void *, u_int), void *arg) -+{ -+#if 0 -+ int error; -+ -+ if ((flags & CRYPTO_F_SKBUF) != 0) -+ error = XXXXXX((struct mbuf *)buf, off, len, f, arg); -+ else if ((flags & CRYPTO_F_IOV) != 0) -+ error = cuio_apply((struct uio *)buf, off, len, f, arg); -+ else -+ error = (*f)(arg, buf + off, len); -+ return (error); -+#else -+ KASSERT(0, ("crypto_apply not implemented!\n")); -+#endif -+ return 0; -+} -+ -+EXPORT_SYMBOL(crypto_copyback); -+EXPORT_SYMBOL(crypto_copydata); -+EXPORT_SYMBOL(crypto_apply); -+ -diff -Nur linux-2.6.30.orig/crypto/ocf/crypto.c linux-2.6.30/crypto/ocf/crypto.c ---- linux-2.6.30.orig/crypto/ocf/crypto.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/crypto.c 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,1741 @@ -+/*- -+ * Linux port done by David McCullough <david_mccullough@securecomputing.com> -+ * Copyright (C) 2006-2007 David McCullough -+ * Copyright (C) 2004-2005 Intel Corporation. -+ * The license and original author are listed below. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * Copyright (c) 2002-2006 Sam Leffler. All rights reserved. -+ * -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+#if 0 -+#include <sys/cdefs.h> -+__FBSDID("$FreeBSD: src/sys/opencrypto/crypto.c,v 1.27 2007/03/21 03:42:51 sam Exp $"); -+#endif -+ -+/* -+ * Cryptographic Subsystem. -+ * -+ * This code is derived from the Openbsd Cryptographic Framework (OCF) -+ * that has the copyright shown below. Very little of the original -+ * code remains. -+ */ -+/*- -+ * The author of this code is Angelos D. Keromytis (angelos@cis.upenn.edu) -+ * -+ * This code was written by Angelos D. Keromytis in Athens, Greece, in -+ * February 2000. Network Security Technologies Inc. (NSTI) kindly -+ * supported the development of this code. -+ * -+ * Copyright (c) 2000, 2001 Angelos D. Keromytis -+ * -+ * Permission to use, copy, and modify this software with or without fee -+ * is hereby granted, provided that this entire notice is included in -+ * all source code copies of any software which is or includes a copy or -+ * modification of this software. -+ * -+ * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR -+ * IMPLIED WARRANTY. IN PARTICULAR, NONE OF THE AUTHORS MAKES ANY -+ * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE -+ * MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR -+ * PURPOSE. -+ * -+__FBSDID("$FreeBSD: src/sys/opencrypto/crypto.c,v 1.16 2005/01/07 02:29:16 imp Exp $"); -+ */ -+ -+ -+#ifndef AUTOCONF_INCLUDED -+#include <linux/config.h> -+#endif -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/list.h> -+#include <linux/slab.h> -+#include <linux/wait.h> -+#include <linux/sched.h> -+#include <linux/spinlock.h> -+#include <linux/version.h> -+#include <cryptodev.h> -+ -+/* -+ * keep track of whether or not we have been initialised, a big -+ * issue if we are linked into the kernel and a driver gets started before -+ * us -+ */ -+static int crypto_initted = 0; -+ -+/* -+ * Crypto drivers register themselves by allocating a slot in the -+ * crypto_drivers table with crypto_get_driverid() and then registering -+ * each algorithm they support with crypto_register() and crypto_kregister(). -+ */ -+ -+/* -+ * lock on driver table -+ * we track its state as spin_is_locked does not do anything on non-SMP boxes -+ */ -+static spinlock_t crypto_drivers_lock; -+static int crypto_drivers_locked; /* for non-SMP boxes */ -+ -+#define CRYPTO_DRIVER_LOCK() \ -+ ({ \ -+ spin_lock_irqsave(&crypto_drivers_lock, d_flags); \ -+ crypto_drivers_locked = 1; \ -+ dprintk("%s,%d: DRIVER_LOCK()\n", __FILE__, __LINE__); \ -+ }) -+#define CRYPTO_DRIVER_UNLOCK() \ -+ ({ \ -+ dprintk("%s,%d: DRIVER_UNLOCK()\n", __FILE__, __LINE__); \ -+ crypto_drivers_locked = 0; \ -+ spin_unlock_irqrestore(&crypto_drivers_lock, d_flags); \ -+ }) -+#define CRYPTO_DRIVER_ASSERT() \ -+ ({ \ -+ if (!crypto_drivers_locked) { \ -+ dprintk("%s,%d: DRIVER_ASSERT!\n", __FILE__, __LINE__); \ -+ } \ -+ }) -+ -+/* -+ * Crypto device/driver capabilities structure. -+ * -+ * Synchronization: -+ * (d) - protected by CRYPTO_DRIVER_LOCK() -+ * (q) - protected by CRYPTO_Q_LOCK() -+ * Not tagged fields are read-only. -+ */ -+struct cryptocap { -+ device_t cc_dev; /* (d) device/driver */ -+ u_int32_t cc_sessions; /* (d) # of sessions */ -+ u_int32_t cc_koperations; /* (d) # os asym operations */ -+ /* -+ * Largest possible operator length (in bits) for each type of -+ * encryption algorithm. XXX not used -+ */ -+ u_int16_t cc_max_op_len[CRYPTO_ALGORITHM_MAX + 1]; -+ u_int8_t cc_alg[CRYPTO_ALGORITHM_MAX + 1]; -+ u_int8_t cc_kalg[CRK_ALGORITHM_MAX + 1]; -+ -+ int cc_flags; /* (d) flags */ -+#define CRYPTOCAP_F_CLEANUP 0x80000000 /* needs resource cleanup */ -+ int cc_qblocked; /* (q) symmetric q blocked */ -+ int cc_kqblocked; /* (q) asymmetric q blocked */ -+}; -+static struct cryptocap *crypto_drivers = NULL; -+static int crypto_drivers_num = 0; -+ -+/* -+ * There are two queues for crypto requests; one for symmetric (e.g. -+ * cipher) operations and one for asymmetric (e.g. MOD)operations. -+ * A single mutex is used to lock access to both queues. We could -+ * have one per-queue but having one simplifies handling of block/unblock -+ * operations. -+ */ -+static int crp_sleep = 0; -+static LIST_HEAD(crp_q); /* request queues */ -+static LIST_HEAD(crp_kq); -+ -+static spinlock_t crypto_q_lock; -+ -+int crypto_all_qblocked = 0; /* protect with Q_LOCK */ -+module_param(crypto_all_qblocked, int, 0444); -+MODULE_PARM_DESC(crypto_all_qblocked, "Are all crypto queues blocked"); -+ -+int crypto_all_kqblocked = 0; /* protect with Q_LOCK */ -+module_param(crypto_all_kqblocked, int, 0444); -+MODULE_PARM_DESC(crypto_all_kqblocked, "Are all asym crypto queues blocked"); -+ -+#define CRYPTO_Q_LOCK() \ -+ ({ \ -+ spin_lock_irqsave(&crypto_q_lock, q_flags); \ -+ dprintk("%s,%d: Q_LOCK()\n", __FILE__, __LINE__); \ -+ }) -+#define CRYPTO_Q_UNLOCK() \ -+ ({ \ -+ dprintk("%s,%d: Q_UNLOCK()\n", __FILE__, __LINE__); \ -+ spin_unlock_irqrestore(&crypto_q_lock, q_flags); \ -+ }) -+ -+/* -+ * There are two queues for processing completed crypto requests; one -+ * for the symmetric and one for the asymmetric ops. We only need one -+ * but have two to avoid type futzing (cryptop vs. cryptkop). A single -+ * mutex is used to lock access to both queues. Note that this lock -+ * must be separate from the lock on request queues to insure driver -+ * callbacks don't generate lock order reversals. -+ */ -+static LIST_HEAD(crp_ret_q); /* callback queues */ -+static LIST_HEAD(crp_ret_kq); -+ -+static spinlock_t crypto_ret_q_lock; -+#define CRYPTO_RETQ_LOCK() \ -+ ({ \ -+ spin_lock_irqsave(&crypto_ret_q_lock, r_flags); \ -+ dprintk("%s,%d: RETQ_LOCK\n", __FILE__, __LINE__); \ -+ }) -+#define CRYPTO_RETQ_UNLOCK() \ -+ ({ \ -+ dprintk("%s,%d: RETQ_UNLOCK\n", __FILE__, __LINE__); \ -+ spin_unlock_irqrestore(&crypto_ret_q_lock, r_flags); \ -+ }) -+#define CRYPTO_RETQ_EMPTY() (list_empty(&crp_ret_q) && list_empty(&crp_ret_kq)) -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) -+static kmem_cache_t *cryptop_zone; -+static kmem_cache_t *cryptodesc_zone; -+#else -+static struct kmem_cache *cryptop_zone; -+static struct kmem_cache *cryptodesc_zone; -+#endif -+ -+#define debug crypto_debug -+int crypto_debug = 0; -+module_param(crypto_debug, int, 0644); -+MODULE_PARM_DESC(crypto_debug, "Enable debug"); -+EXPORT_SYMBOL(crypto_debug); -+ -+/* -+ * Maximum number of outstanding crypto requests before we start -+ * failing requests. We need this to prevent DOS when too many -+ * requests are arriving for us to keep up. Otherwise we will -+ * run the system out of memory. Since crypto is slow, we are -+ * usually the bottleneck that needs to say, enough is enough. -+ * -+ * We cannot print errors when this condition occurs, we are already too -+ * slow, printing anything will just kill us -+ */ -+ -+static int crypto_q_cnt = 0; -+module_param(crypto_q_cnt, int, 0444); -+MODULE_PARM_DESC(crypto_q_cnt, -+ "Current number of outstanding crypto requests"); -+ -+static int crypto_q_max = 1000; -+module_param(crypto_q_max, int, 0644); -+MODULE_PARM_DESC(crypto_q_max, -+ "Maximum number of outstanding crypto requests"); -+ -+#define bootverbose crypto_verbose -+static int crypto_verbose = 0; -+module_param(crypto_verbose, int, 0644); -+MODULE_PARM_DESC(crypto_verbose, -+ "Enable verbose crypto startup"); -+ -+int crypto_usercrypto = 1; /* userland may do crypto reqs */ -+module_param(crypto_usercrypto, int, 0644); -+MODULE_PARM_DESC(crypto_usercrypto, -+ "Enable/disable user-mode access to crypto support"); -+ -+int crypto_userasymcrypto = 1; /* userland may do asym crypto reqs */ -+module_param(crypto_userasymcrypto, int, 0644); -+MODULE_PARM_DESC(crypto_userasymcrypto, -+ "Enable/disable user-mode access to asymmetric crypto support"); -+ -+int crypto_devallowsoft = 0; /* only use hardware crypto */ -+module_param(crypto_devallowsoft, int, 0644); -+MODULE_PARM_DESC(crypto_devallowsoft, -+ "Enable/disable use of software crypto support"); -+ -+static pid_t cryptoproc = (pid_t) -1; -+static struct completion cryptoproc_exited; -+static DECLARE_WAIT_QUEUE_HEAD(cryptoproc_wait); -+static pid_t cryptoretproc = (pid_t) -1; -+static struct completion cryptoretproc_exited; -+static DECLARE_WAIT_QUEUE_HEAD(cryptoretproc_wait); -+ -+static int crypto_proc(void *arg); -+static int crypto_ret_proc(void *arg); -+static int crypto_invoke(struct cryptocap *cap, struct cryptop *crp, int hint); -+static int crypto_kinvoke(struct cryptkop *krp, int flags); -+static void crypto_exit(void); -+static int crypto_init(void); -+ -+static struct cryptostats cryptostats; -+ -+static struct cryptocap * -+crypto_checkdriver(u_int32_t hid) -+{ -+ if (crypto_drivers == NULL) -+ return NULL; -+ return (hid >= crypto_drivers_num ? NULL : &crypto_drivers[hid]); -+} -+ -+/* -+ * Compare a driver's list of supported algorithms against another -+ * list; return non-zero if all algorithms are supported. -+ */ -+static int -+driver_suitable(const struct cryptocap *cap, const struct cryptoini *cri) -+{ -+ const struct cryptoini *cr; -+ -+ /* See if all the algorithms are supported. */ -+ for (cr = cri; cr; cr = cr->cri_next) -+ if (cap->cc_alg[cr->cri_alg] == 0) -+ return 0; -+ return 1; -+} -+ -+/* -+ * Select a driver for a new session that supports the specified -+ * algorithms and, optionally, is constrained according to the flags. -+ * The algorithm we use here is pretty stupid; just use the -+ * first driver that supports all the algorithms we need. If there -+ * are multiple drivers we choose the driver with the fewest active -+ * sessions. We prefer hardware-backed drivers to software ones. -+ * -+ * XXX We need more smarts here (in real life too, but that's -+ * XXX another story altogether). -+ */ -+static struct cryptocap * -+crypto_select_driver(const struct cryptoini *cri, int flags) -+{ -+ struct cryptocap *cap, *best; -+ int match, hid; -+ -+ CRYPTO_DRIVER_ASSERT(); -+ -+ /* -+ * Look first for hardware crypto devices if permitted. -+ */ -+ if (flags & CRYPTOCAP_F_HARDWARE) -+ match = CRYPTOCAP_F_HARDWARE; -+ else -+ match = CRYPTOCAP_F_SOFTWARE; -+ best = NULL; -+again: -+ for (hid = 0; hid < crypto_drivers_num; hid++) { -+ cap = &crypto_drivers[hid]; -+ /* -+ * If it's not initialized, is in the process of -+ * going away, or is not appropriate (hardware -+ * or software based on match), then skip. -+ */ -+ if (cap->cc_dev == NULL || -+ (cap->cc_flags & CRYPTOCAP_F_CLEANUP) || -+ (cap->cc_flags & match) == 0) -+ continue; -+ -+ /* verify all the algorithms are supported. */ -+ if (driver_suitable(cap, cri)) { -+ if (best == NULL || -+ cap->cc_sessions < best->cc_sessions) -+ best = cap; -+ } -+ } -+ if (best != NULL) -+ return best; -+ if (match == CRYPTOCAP_F_HARDWARE && (flags & CRYPTOCAP_F_SOFTWARE)) { -+ /* sort of an Algol 68-style for loop */ -+ match = CRYPTOCAP_F_SOFTWARE; -+ goto again; -+ } -+ return best; -+} -+ -+/* -+ * Create a new session. The crid argument specifies a crypto -+ * driver to use or constraints on a driver to select (hardware -+ * only, software only, either). Whatever driver is selected -+ * must be capable of the requested crypto algorithms. -+ */ -+int -+crypto_newsession(u_int64_t *sid, struct cryptoini *cri, int crid) -+{ -+ struct cryptocap *cap; -+ u_int32_t hid, lid; -+ int err; -+ unsigned long d_flags; -+ -+ CRYPTO_DRIVER_LOCK(); -+ if ((crid & (CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE)) == 0) { -+ /* -+ * Use specified driver; verify it is capable. -+ */ -+ cap = crypto_checkdriver(crid); -+ if (cap != NULL && !driver_suitable(cap, cri)) -+ cap = NULL; -+ } else { -+ /* -+ * No requested driver; select based on crid flags. -+ */ -+ cap = crypto_select_driver(cri, crid); -+ /* -+ * if NULL then can't do everything in one session. -+ * XXX Fix this. We need to inject a "virtual" session -+ * XXX layer right about here. -+ */ -+ } -+ if (cap != NULL) { -+ /* Call the driver initialization routine. */ -+ hid = cap - crypto_drivers; -+ lid = hid; /* Pass the driver ID. */ -+ cap->cc_sessions++; -+ CRYPTO_DRIVER_UNLOCK(); -+ err = CRYPTODEV_NEWSESSION(cap->cc_dev, &lid, cri); -+ CRYPTO_DRIVER_LOCK(); -+ if (err == 0) { -+ (*sid) = (cap->cc_flags & 0xff000000) -+ | (hid & 0x00ffffff); -+ (*sid) <<= 32; -+ (*sid) |= (lid & 0xffffffff); -+ } else -+ cap->cc_sessions--; -+ } else -+ err = EINVAL; -+ CRYPTO_DRIVER_UNLOCK(); -+ return err; -+} -+ -+static void -+crypto_remove(struct cryptocap *cap) -+{ -+ CRYPTO_DRIVER_ASSERT(); -+ if (cap->cc_sessions == 0 && cap->cc_koperations == 0) -+ bzero(cap, sizeof(*cap)); -+} -+ -+/* -+ * Delete an existing session (or a reserved session on an unregistered -+ * driver). -+ */ -+int -+crypto_freesession(u_int64_t sid) -+{ -+ struct cryptocap *cap; -+ u_int32_t hid; -+ int err = 0; -+ unsigned long d_flags; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ CRYPTO_DRIVER_LOCK(); -+ -+ if (crypto_drivers == NULL) { -+ err = EINVAL; -+ goto done; -+ } -+ -+ /* Determine two IDs. */ -+ hid = CRYPTO_SESID2HID(sid); -+ -+ if (hid >= crypto_drivers_num) { -+ dprintk("%s - INVALID DRIVER NUM %d\n", __FUNCTION__, hid); -+ err = ENOENT; -+ goto done; -+ } -+ cap = &crypto_drivers[hid]; -+ -+ if (cap->cc_dev) { -+ CRYPTO_DRIVER_UNLOCK(); -+ /* Call the driver cleanup routine, if available, unlocked. */ -+ err = CRYPTODEV_FREESESSION(cap->cc_dev, sid); -+ CRYPTO_DRIVER_LOCK(); -+ } -+ -+ if (cap->cc_sessions) -+ cap->cc_sessions--; -+ -+ if (cap->cc_flags & CRYPTOCAP_F_CLEANUP) -+ crypto_remove(cap); -+ -+done: -+ CRYPTO_DRIVER_UNLOCK(); -+ return err; -+} -+ -+/* -+ * Return an unused driver id. Used by drivers prior to registering -+ * support for the algorithms they handle. -+ */ -+int32_t -+crypto_get_driverid(device_t dev, int flags) -+{ -+ struct cryptocap *newdrv; -+ int i; -+ unsigned long d_flags; -+ -+ if ((flags & (CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE)) == 0) { -+ printf("%s: no flags specified when registering driver\n", -+ device_get_nameunit(dev)); -+ return -1; -+ } -+ -+ CRYPTO_DRIVER_LOCK(); -+ -+ for (i = 0; i < crypto_drivers_num; i++) { -+ if (crypto_drivers[i].cc_dev == NULL && -+ (crypto_drivers[i].cc_flags & CRYPTOCAP_F_CLEANUP) == 0) { -+ break; -+ } -+ } -+ -+ /* Out of entries, allocate some more. */ -+ if (i == crypto_drivers_num) { -+ /* Be careful about wrap-around. */ -+ if (2 * crypto_drivers_num <= crypto_drivers_num) { -+ CRYPTO_DRIVER_UNLOCK(); -+ printk("crypto: driver count wraparound!\n"); -+ return -1; -+ } -+ -+ newdrv = kmalloc(2 * crypto_drivers_num * sizeof(struct cryptocap), -+ GFP_KERNEL); -+ if (newdrv == NULL) { -+ CRYPTO_DRIVER_UNLOCK(); -+ printk("crypto: no space to expand driver table!\n"); -+ return -1; -+ } -+ -+ memcpy(newdrv, crypto_drivers, -+ crypto_drivers_num * sizeof(struct cryptocap)); -+ memset(&newdrv[crypto_drivers_num], 0, -+ crypto_drivers_num * sizeof(struct cryptocap)); -+ -+ crypto_drivers_num *= 2; -+ -+ kfree(crypto_drivers); -+ crypto_drivers = newdrv; -+ } -+ -+ /* NB: state is zero'd on free */ -+ crypto_drivers[i].cc_sessions = 1; /* Mark */ -+ crypto_drivers[i].cc_dev = dev; -+ crypto_drivers[i].cc_flags = flags; -+ if (bootverbose) -+ printf("crypto: assign %s driver id %u, flags %u\n", -+ device_get_nameunit(dev), i, flags); -+ -+ CRYPTO_DRIVER_UNLOCK(); -+ -+ return i; -+} -+ -+/* -+ * Lookup a driver by name. We match against the full device -+ * name and unit, and against just the name. The latter gives -+ * us a simple widlcarding by device name. On success return the -+ * driver/hardware identifier; otherwise return -1. -+ */ -+int -+crypto_find_driver(const char *match) -+{ -+ int i, len = strlen(match); -+ unsigned long d_flags; -+ -+ CRYPTO_DRIVER_LOCK(); -+ for (i = 0; i < crypto_drivers_num; i++) { -+ device_t dev = crypto_drivers[i].cc_dev; -+ if (dev == NULL || -+ (crypto_drivers[i].cc_flags & CRYPTOCAP_F_CLEANUP)) -+ continue; -+ if (strncmp(match, device_get_nameunit(dev), len) == 0 || -+ strncmp(match, device_get_name(dev), len) == 0) -+ break; -+ } -+ CRYPTO_DRIVER_UNLOCK(); -+ return i < crypto_drivers_num ? i : -1; -+} -+ -+/* -+ * Return the device_t for the specified driver or NULL -+ * if the driver identifier is invalid. -+ */ -+device_t -+crypto_find_device_byhid(int hid) -+{ -+ struct cryptocap *cap = crypto_checkdriver(hid); -+ return cap != NULL ? cap->cc_dev : NULL; -+} -+ -+/* -+ * Return the device/driver capabilities. -+ */ -+int -+crypto_getcaps(int hid) -+{ -+ struct cryptocap *cap = crypto_checkdriver(hid); -+ return cap != NULL ? cap->cc_flags : 0; -+} -+ -+/* -+ * Register support for a key-related algorithm. This routine -+ * is called once for each algorithm supported a driver. -+ */ -+int -+crypto_kregister(u_int32_t driverid, int kalg, u_int32_t flags) -+{ -+ struct cryptocap *cap; -+ int err; -+ unsigned long d_flags; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ CRYPTO_DRIVER_LOCK(); -+ -+ cap = crypto_checkdriver(driverid); -+ if (cap != NULL && -+ (CRK_ALGORITM_MIN <= kalg && kalg <= CRK_ALGORITHM_MAX)) { -+ /* -+ * XXX Do some performance testing to determine placing. -+ * XXX We probably need an auxiliary data structure that -+ * XXX describes relative performances. -+ */ -+ -+ cap->cc_kalg[kalg] = flags | CRYPTO_ALG_FLAG_SUPPORTED; -+ if (bootverbose) -+ printf("crypto: %s registers key alg %u flags %u\n" -+ , device_get_nameunit(cap->cc_dev) -+ , kalg -+ , flags -+ ); -+ err = 0; -+ } else -+ err = EINVAL; -+ -+ CRYPTO_DRIVER_UNLOCK(); -+ return err; -+} -+ -+/* -+ * Register support for a non-key-related algorithm. This routine -+ * is called once for each such algorithm supported by a driver. -+ */ -+int -+crypto_register(u_int32_t driverid, int alg, u_int16_t maxoplen, -+ u_int32_t flags) -+{ -+ struct cryptocap *cap; -+ int err; -+ unsigned long d_flags; -+ -+ dprintk("%s(id=0x%x, alg=%d, maxoplen=%d, flags=0x%x)\n", __FUNCTION__, -+ driverid, alg, maxoplen, flags); -+ -+ CRYPTO_DRIVER_LOCK(); -+ -+ cap = crypto_checkdriver(driverid); -+ /* NB: algorithms are in the range [1..max] */ -+ if (cap != NULL && -+ (CRYPTO_ALGORITHM_MIN <= alg && alg <= CRYPTO_ALGORITHM_MAX)) { -+ /* -+ * XXX Do some performance testing to determine placing. -+ * XXX We probably need an auxiliary data structure that -+ * XXX describes relative performances. -+ */ -+ -+ cap->cc_alg[alg] = flags | CRYPTO_ALG_FLAG_SUPPORTED; -+ cap->cc_max_op_len[alg] = maxoplen; -+ if (bootverbose) -+ printf("crypto: %s registers alg %u flags %u maxoplen %u\n" -+ , device_get_nameunit(cap->cc_dev) -+ , alg -+ , flags -+ , maxoplen -+ ); -+ cap->cc_sessions = 0; /* Unmark */ -+ err = 0; -+ } else -+ err = EINVAL; -+ -+ CRYPTO_DRIVER_UNLOCK(); -+ return err; -+} -+ -+static void -+driver_finis(struct cryptocap *cap) -+{ -+ u_int32_t ses, kops; -+ -+ CRYPTO_DRIVER_ASSERT(); -+ -+ ses = cap->cc_sessions; -+ kops = cap->cc_koperations; -+ bzero(cap, sizeof(*cap)); -+ if (ses != 0 || kops != 0) { -+ /* -+ * If there are pending sessions, -+ * just mark as invalid. -+ */ -+ cap->cc_flags |= CRYPTOCAP_F_CLEANUP; -+ cap->cc_sessions = ses; -+ cap->cc_koperations = kops; -+ } -+} -+ -+/* -+ * Unregister a crypto driver. If there are pending sessions using it, -+ * leave enough information around so that subsequent calls using those -+ * sessions will correctly detect the driver has been unregistered and -+ * reroute requests. -+ */ -+int -+crypto_unregister(u_int32_t driverid, int alg) -+{ -+ struct cryptocap *cap; -+ int i, err; -+ unsigned long d_flags; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ CRYPTO_DRIVER_LOCK(); -+ -+ cap = crypto_checkdriver(driverid); -+ if (cap != NULL && -+ (CRYPTO_ALGORITHM_MIN <= alg && alg <= CRYPTO_ALGORITHM_MAX) && -+ cap->cc_alg[alg] != 0) { -+ cap->cc_alg[alg] = 0; -+ cap->cc_max_op_len[alg] = 0; -+ -+ /* Was this the last algorithm ? */ -+ for (i = 1; i <= CRYPTO_ALGORITHM_MAX; i++) -+ if (cap->cc_alg[i] != 0) -+ break; -+ -+ if (i == CRYPTO_ALGORITHM_MAX + 1) -+ driver_finis(cap); -+ err = 0; -+ } else -+ err = EINVAL; -+ CRYPTO_DRIVER_UNLOCK(); -+ return err; -+} -+ -+/* -+ * Unregister all algorithms associated with a crypto driver. -+ * If there are pending sessions using it, leave enough information -+ * around so that subsequent calls using those sessions will -+ * correctly detect the driver has been unregistered and reroute -+ * requests. -+ */ -+int -+crypto_unregister_all(u_int32_t driverid) -+{ -+ struct cryptocap *cap; -+ int err; -+ unsigned long d_flags; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ CRYPTO_DRIVER_LOCK(); -+ cap = crypto_checkdriver(driverid); -+ if (cap != NULL) { -+ driver_finis(cap); -+ err = 0; -+ } else -+ err = EINVAL; -+ CRYPTO_DRIVER_UNLOCK(); -+ -+ return err; -+} -+ -+/* -+ * Clear blockage on a driver. The what parameter indicates whether -+ * the driver is now ready for cryptop's and/or cryptokop's. -+ */ -+int -+crypto_unblock(u_int32_t driverid, int what) -+{ -+ struct cryptocap *cap; -+ int err; -+ unsigned long q_flags; -+ -+ CRYPTO_Q_LOCK(); -+ cap = crypto_checkdriver(driverid); -+ if (cap != NULL) { -+ if (what & CRYPTO_SYMQ) { -+ cap->cc_qblocked = 0; -+ crypto_all_qblocked = 0; -+ } -+ if (what & CRYPTO_ASYMQ) { -+ cap->cc_kqblocked = 0; -+ crypto_all_kqblocked = 0; -+ } -+ if (crp_sleep) -+ wake_up_interruptible(&cryptoproc_wait); -+ err = 0; -+ } else -+ err = EINVAL; -+ CRYPTO_Q_UNLOCK(); //DAVIDM should this be a driver lock -+ -+ return err; -+} -+ -+/* -+ * Add a crypto request to a queue, to be processed by the kernel thread. -+ */ -+int -+crypto_dispatch(struct cryptop *crp) -+{ -+ struct cryptocap *cap; -+ int result = -1; -+ unsigned long q_flags; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ -+ cryptostats.cs_ops++; -+ -+ CRYPTO_Q_LOCK(); -+ if (crypto_q_cnt >= crypto_q_max) { -+ CRYPTO_Q_UNLOCK(); -+ cryptostats.cs_drops++; -+ return ENOMEM; -+ } -+ crypto_q_cnt++; -+ -+ /* -+ * Caller marked the request to be processed immediately; dispatch -+ * it directly to the driver unless the driver is currently blocked. -+ */ -+ if ((crp->crp_flags & CRYPTO_F_BATCH) == 0) { -+ int hid = CRYPTO_SESID2HID(crp->crp_sid); -+ cap = crypto_checkdriver(hid); -+ /* Driver cannot disappear when there is an active session. */ -+ KASSERT(cap != NULL, ("%s: Driver disappeared.", __func__)); -+ if (!cap->cc_qblocked) { -+ crypto_all_qblocked = 0; -+ crypto_drivers[hid].cc_qblocked = 1; -+ CRYPTO_Q_UNLOCK(); -+ result = crypto_invoke(cap, crp, 0); -+ CRYPTO_Q_LOCK(); -+ if (result != ERESTART) -+ crypto_drivers[hid].cc_qblocked = 0; -+ } -+ } -+ if (result == ERESTART) { -+ /* -+ * The driver ran out of resources, mark the -+ * driver ``blocked'' for cryptop's and put -+ * the request back in the queue. It would -+ * best to put the request back where we got -+ * it but that's hard so for now we put it -+ * at the front. This should be ok; putting -+ * it at the end does not work. -+ */ -+ list_add(&crp->crp_next, &crp_q); -+ cryptostats.cs_blocks++; -+ } else if (result == -1) { -+ TAILQ_INSERT_TAIL(&crp_q, crp, crp_next); -+ } -+ if (crp_sleep) -+ wake_up_interruptible(&cryptoproc_wait); -+ CRYPTO_Q_UNLOCK(); -+ return 0; -+} -+ -+/* -+ * Add an asymetric crypto request to a queue, -+ * to be processed by the kernel thread. -+ */ -+int -+crypto_kdispatch(struct cryptkop *krp) -+{ -+ int error; -+ unsigned long q_flags; -+ -+ cryptostats.cs_kops++; -+ -+ error = crypto_kinvoke(krp, krp->krp_crid); -+ if (error == ERESTART) { -+ CRYPTO_Q_LOCK(); -+ TAILQ_INSERT_TAIL(&crp_kq, krp, krp_next); -+ if (crp_sleep) -+ wake_up_interruptible(&cryptoproc_wait); -+ CRYPTO_Q_UNLOCK(); -+ error = 0; -+ } -+ return error; -+} -+ -+/* -+ * Verify a driver is suitable for the specified operation. -+ */ -+static __inline int -+kdriver_suitable(const struct cryptocap *cap, const struct cryptkop *krp) -+{ -+ return (cap->cc_kalg[krp->krp_op] & CRYPTO_ALG_FLAG_SUPPORTED) != 0; -+} -+ -+/* -+ * Select a driver for an asym operation. The driver must -+ * support the necessary algorithm. The caller can constrain -+ * which device is selected with the flags parameter. The -+ * algorithm we use here is pretty stupid; just use the first -+ * driver that supports the algorithms we need. If there are -+ * multiple suitable drivers we choose the driver with the -+ * fewest active operations. We prefer hardware-backed -+ * drivers to software ones when either may be used. -+ */ -+static struct cryptocap * -+crypto_select_kdriver(const struct cryptkop *krp, int flags) -+{ -+ struct cryptocap *cap, *best, *blocked; -+ int match, hid; -+ -+ CRYPTO_DRIVER_ASSERT(); -+ -+ /* -+ * Look first for hardware crypto devices if permitted. -+ */ -+ if (flags & CRYPTOCAP_F_HARDWARE) -+ match = CRYPTOCAP_F_HARDWARE; -+ else -+ match = CRYPTOCAP_F_SOFTWARE; -+ best = NULL; -+ blocked = NULL; -+again: -+ for (hid = 0; hid < crypto_drivers_num; hid++) { -+ cap = &crypto_drivers[hid]; -+ /* -+ * If it's not initialized, is in the process of -+ * going away, or is not appropriate (hardware -+ * or software based on match), then skip. -+ */ -+ if (cap->cc_dev == NULL || -+ (cap->cc_flags & CRYPTOCAP_F_CLEANUP) || -+ (cap->cc_flags & match) == 0) -+ continue; -+ -+ /* verify all the algorithms are supported. */ -+ if (kdriver_suitable(cap, krp)) { -+ if (best == NULL || -+ cap->cc_koperations < best->cc_koperations) -+ best = cap; -+ } -+ } -+ if (best != NULL) -+ return best; -+ if (match == CRYPTOCAP_F_HARDWARE && (flags & CRYPTOCAP_F_SOFTWARE)) { -+ /* sort of an Algol 68-style for loop */ -+ match = CRYPTOCAP_F_SOFTWARE; -+ goto again; -+ } -+ return best; -+} -+ -+/* -+ * Dispatch an assymetric crypto request. -+ */ -+static int -+crypto_kinvoke(struct cryptkop *krp, int crid) -+{ -+ struct cryptocap *cap = NULL; -+ int error; -+ unsigned long d_flags; -+ -+ KASSERT(krp != NULL, ("%s: krp == NULL", __func__)); -+ KASSERT(krp->krp_callback != NULL, -+ ("%s: krp->crp_callback == NULL", __func__)); -+ -+ CRYPTO_DRIVER_LOCK(); -+ if ((crid & (CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE)) == 0) { -+ cap = crypto_checkdriver(crid); -+ if (cap != NULL) { -+ /* -+ * Driver present, it must support the necessary -+ * algorithm and, if s/w drivers are excluded, -+ * it must be registered as hardware-backed. -+ */ -+ if (!kdriver_suitable(cap, krp) || -+ (!crypto_devallowsoft && -+ (cap->cc_flags & CRYPTOCAP_F_HARDWARE) == 0)) -+ cap = NULL; -+ } -+ } else { -+ /* -+ * No requested driver; select based on crid flags. -+ */ -+ if (!crypto_devallowsoft) /* NB: disallow s/w drivers */ -+ crid &= ~CRYPTOCAP_F_SOFTWARE; -+ cap = crypto_select_kdriver(krp, crid); -+ } -+ if (cap != NULL && !cap->cc_kqblocked) { -+ krp->krp_hid = cap - crypto_drivers; -+ cap->cc_koperations++; -+ CRYPTO_DRIVER_UNLOCK(); -+ error = CRYPTODEV_KPROCESS(cap->cc_dev, krp, 0); -+ CRYPTO_DRIVER_LOCK(); -+ if (error == ERESTART) { -+ cap->cc_koperations--; -+ CRYPTO_DRIVER_UNLOCK(); -+ return (error); -+ } -+ /* return the actual device used */ -+ krp->krp_crid = krp->krp_hid; -+ } else { -+ /* -+ * NB: cap is !NULL if device is blocked; in -+ * that case return ERESTART so the operation -+ * is resubmitted if possible. -+ */ -+ error = (cap == NULL) ? ENODEV : ERESTART; -+ } -+ CRYPTO_DRIVER_UNLOCK(); -+ -+ if (error) { -+ krp->krp_status = error; -+ crypto_kdone(krp); -+ } -+ return 0; -+} -+ -+ -+/* -+ * Dispatch a crypto request to the appropriate crypto devices. -+ */ -+static int -+crypto_invoke(struct cryptocap *cap, struct cryptop *crp, int hint) -+{ -+ KASSERT(crp != NULL, ("%s: crp == NULL", __func__)); -+ KASSERT(crp->crp_callback != NULL, -+ ("%s: crp->crp_callback == NULL", __func__)); -+ KASSERT(crp->crp_desc != NULL, ("%s: crp->crp_desc == NULL", __func__)); -+ -+ dprintk("%s()\n", __FUNCTION__); -+ -+#ifdef CRYPTO_TIMING -+ if (crypto_timing) -+ crypto_tstat(&cryptostats.cs_invoke, &crp->crp_tstamp); -+#endif -+ if (cap->cc_flags & CRYPTOCAP_F_CLEANUP) { -+ struct cryptodesc *crd; -+ u_int64_t nid; -+ -+ /* -+ * Driver has unregistered; migrate the session and return -+ * an error to the caller so they'll resubmit the op. -+ * -+ * XXX: What if there are more already queued requests for this -+ * session? -+ */ -+ crypto_freesession(crp->crp_sid); -+ -+ for (crd = crp->crp_desc; crd->crd_next; crd = crd->crd_next) -+ crd->CRD_INI.cri_next = &(crd->crd_next->CRD_INI); -+ -+ /* XXX propagate flags from initial session? */ -+ if (crypto_newsession(&nid, &(crp->crp_desc->CRD_INI), -+ CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE) == 0) -+ crp->crp_sid = nid; -+ -+ crp->crp_etype = EAGAIN; -+ crypto_done(crp); -+ return 0; -+ } else { -+ /* -+ * Invoke the driver to process the request. -+ */ -+ return CRYPTODEV_PROCESS(cap->cc_dev, crp, hint); -+ } -+} -+ -+/* -+ * Release a set of crypto descriptors. -+ */ -+void -+crypto_freereq(struct cryptop *crp) -+{ -+ struct cryptodesc *crd; -+ -+ if (crp == NULL) -+ return; -+ -+#ifdef DIAGNOSTIC -+ { -+ struct cryptop *crp2; -+ unsigned long q_flags; -+ -+ CRYPTO_Q_LOCK(); -+ TAILQ_FOREACH(crp2, &crp_q, crp_next) { -+ KASSERT(crp2 != crp, -+ ("Freeing cryptop from the crypto queue (%p).", -+ crp)); -+ } -+ CRYPTO_Q_UNLOCK(); -+ CRYPTO_RETQ_LOCK(); -+ TAILQ_FOREACH(crp2, &crp_ret_q, crp_next) { -+ KASSERT(crp2 != crp, -+ ("Freeing cryptop from the return queue (%p).", -+ crp)); -+ } -+ CRYPTO_RETQ_UNLOCK(); -+ } -+#endif -+ -+ while ((crd = crp->crp_desc) != NULL) { -+ crp->crp_desc = crd->crd_next; -+ kmem_cache_free(cryptodesc_zone, crd); -+ } -+ kmem_cache_free(cryptop_zone, crp); -+} -+ -+/* -+ * Acquire a set of crypto descriptors. -+ */ -+struct cryptop * -+crypto_getreq(int num) -+{ -+ struct cryptodesc *crd; -+ struct cryptop *crp; -+ -+ crp = kmem_cache_alloc(cryptop_zone, SLAB_ATOMIC); -+ if (crp != NULL) { -+ memset(crp, 0, sizeof(*crp)); -+ INIT_LIST_HEAD(&crp->crp_next); -+ init_waitqueue_head(&crp->crp_waitq); -+ while (num--) { -+ crd = kmem_cache_alloc(cryptodesc_zone, SLAB_ATOMIC); -+ if (crd == NULL) { -+ crypto_freereq(crp); -+ return NULL; -+ } -+ memset(crd, 0, sizeof(*crd)); -+ crd->crd_next = crp->crp_desc; -+ crp->crp_desc = crd; -+ } -+ } -+ return crp; -+} -+ -+/* -+ * Invoke the callback on behalf of the driver. -+ */ -+void -+crypto_done(struct cryptop *crp) -+{ -+ unsigned long q_flags; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ if ((crp->crp_flags & CRYPTO_F_DONE) == 0) { -+ crp->crp_flags |= CRYPTO_F_DONE; -+ CRYPTO_Q_LOCK(); -+ crypto_q_cnt--; -+ CRYPTO_Q_UNLOCK(); -+ } else -+ printk("crypto: crypto_done op already done, flags 0x%x", -+ crp->crp_flags); -+ if (crp->crp_etype != 0) -+ cryptostats.cs_errs++; -+ /* -+ * CBIMM means unconditionally do the callback immediately; -+ * CBIFSYNC means do the callback immediately only if the -+ * operation was done synchronously. Both are used to avoid -+ * doing extraneous context switches; the latter is mostly -+ * used with the software crypto driver. -+ */ -+ if ((crp->crp_flags & CRYPTO_F_CBIMM) || -+ ((crp->crp_flags & CRYPTO_F_CBIFSYNC) && -+ (CRYPTO_SESID2CAPS(crp->crp_sid) & CRYPTOCAP_F_SYNC))) { -+ /* -+ * Do the callback directly. This is ok when the -+ * callback routine does very little (e.g. the -+ * /dev/crypto callback method just does a wakeup). -+ */ -+ crp->crp_callback(crp); -+ } else { -+ unsigned long r_flags; -+ /* -+ * Normal case; queue the callback for the thread. -+ */ -+ CRYPTO_RETQ_LOCK(); -+ if (CRYPTO_RETQ_EMPTY()) -+ wake_up_interruptible(&cryptoretproc_wait);/* shared wait channel */ -+ TAILQ_INSERT_TAIL(&crp_ret_q, crp, crp_next); -+ CRYPTO_RETQ_UNLOCK(); -+ } -+} -+ -+/* -+ * Invoke the callback on behalf of the driver. -+ */ -+void -+crypto_kdone(struct cryptkop *krp) -+{ -+ struct cryptocap *cap; -+ unsigned long d_flags; -+ -+ if ((krp->krp_flags & CRYPTO_KF_DONE) != 0) -+ printk("crypto: crypto_kdone op already done, flags 0x%x", -+ krp->krp_flags); -+ krp->krp_flags |= CRYPTO_KF_DONE; -+ if (krp->krp_status != 0) -+ cryptostats.cs_kerrs++; -+ -+ CRYPTO_DRIVER_LOCK(); -+ /* XXX: What if driver is loaded in the meantime? */ -+ if (krp->krp_hid < crypto_drivers_num) { -+ cap = &crypto_drivers[krp->krp_hid]; -+ cap->cc_koperations--; -+ KASSERT(cap->cc_koperations >= 0, ("cc_koperations < 0")); -+ if (cap->cc_flags & CRYPTOCAP_F_CLEANUP) -+ crypto_remove(cap); -+ } -+ CRYPTO_DRIVER_UNLOCK(); -+ -+ /* -+ * CBIMM means unconditionally do the callback immediately; -+ * This is used to avoid doing extraneous context switches -+ */ -+ if ((krp->krp_flags & CRYPTO_KF_CBIMM)) { -+ /* -+ * Do the callback directly. This is ok when the -+ * callback routine does very little (e.g. the -+ * /dev/crypto callback method just does a wakeup). -+ */ -+ krp->krp_callback(krp); -+ } else { -+ unsigned long r_flags; -+ /* -+ * Normal case; queue the callback for the thread. -+ */ -+ CRYPTO_RETQ_LOCK(); -+ if (CRYPTO_RETQ_EMPTY()) -+ wake_up_interruptible(&cryptoretproc_wait);/* shared wait channel */ -+ TAILQ_INSERT_TAIL(&crp_ret_kq, krp, krp_next); -+ CRYPTO_RETQ_UNLOCK(); -+ } -+} -+ -+int -+crypto_getfeat(int *featp) -+{ -+ int hid, kalg, feat = 0; -+ unsigned long d_flags; -+ -+ CRYPTO_DRIVER_LOCK(); -+ for (hid = 0; hid < crypto_drivers_num; hid++) { -+ const struct cryptocap *cap = &crypto_drivers[hid]; -+ -+ if ((cap->cc_flags & CRYPTOCAP_F_SOFTWARE) && -+ !crypto_devallowsoft) { -+ continue; -+ } -+ for (kalg = 0; kalg < CRK_ALGORITHM_MAX; kalg++) -+ if (cap->cc_kalg[kalg] & CRYPTO_ALG_FLAG_SUPPORTED) -+ feat |= 1 << kalg; -+ } -+ CRYPTO_DRIVER_UNLOCK(); -+ *featp = feat; -+ return (0); -+} -+ -+/* -+ * Crypto thread, dispatches crypto requests. -+ */ -+static int -+crypto_proc(void *arg) -+{ -+ struct cryptop *crp, *submit; -+ struct cryptkop *krp, *krpp; -+ struct cryptocap *cap; -+ u_int32_t hid; -+ int result, hint; -+ unsigned long q_flags; -+ -+ ocf_daemonize("crypto"); -+ -+ CRYPTO_Q_LOCK(); -+ for (;;) { -+ /* -+ * we need to make sure we don't get into a busy loop with nothing -+ * to do, the two crypto_all_*blocked vars help us find out when -+ * we are all full and can do nothing on any driver or Q. If so we -+ * wait for an unblock. -+ */ -+ crypto_all_qblocked = !list_empty(&crp_q); -+ -+ /* -+ * Find the first element in the queue that can be -+ * processed and look-ahead to see if multiple ops -+ * are ready for the same driver. -+ */ -+ submit = NULL; -+ hint = 0; -+ list_for_each_entry(crp, &crp_q, crp_next) { -+ hid = CRYPTO_SESID2HID(crp->crp_sid); -+ cap = crypto_checkdriver(hid); -+ /* -+ * Driver cannot disappear when there is an active -+ * session. -+ */ -+ KASSERT(cap != NULL, ("%s:%u Driver disappeared.", -+ __func__, __LINE__)); -+ if (cap == NULL || cap->cc_dev == NULL) { -+ /* Op needs to be migrated, process it. */ -+ if (submit == NULL) -+ submit = crp; -+ break; -+ } -+ if (!cap->cc_qblocked) { -+ if (submit != NULL) { -+ /* -+ * We stop on finding another op, -+ * regardless whether its for the same -+ * driver or not. We could keep -+ * searching the queue but it might be -+ * better to just use a per-driver -+ * queue instead. -+ */ -+ if (CRYPTO_SESID2HID(submit->crp_sid) == hid) -+ hint = CRYPTO_HINT_MORE; -+ break; -+ } else { -+ submit = crp; -+ if ((submit->crp_flags & CRYPTO_F_BATCH) == 0) -+ break; -+ /* keep scanning for more are q'd */ -+ } -+ } -+ } -+ if (submit != NULL) { -+ hid = CRYPTO_SESID2HID(submit->crp_sid); -+ crypto_all_qblocked = 0; -+ list_del(&submit->crp_next); -+ crypto_drivers[hid].cc_qblocked = 1; -+ cap = crypto_checkdriver(hid); -+ CRYPTO_Q_UNLOCK(); -+ KASSERT(cap != NULL, ("%s:%u Driver disappeared.", -+ __func__, __LINE__)); -+ result = crypto_invoke(cap, submit, hint); -+ CRYPTO_Q_LOCK(); -+ if (result == ERESTART) { -+ /* -+ * The driver ran out of resources, mark the -+ * driver ``blocked'' for cryptop's and put -+ * the request back in the queue. It would -+ * best to put the request back where we got -+ * it but that's hard so for now we put it -+ * at the front. This should be ok; putting -+ * it at the end does not work. -+ */ -+ /* XXX validate sid again? */ -+ list_add(&submit->crp_next, &crp_q); -+ cryptostats.cs_blocks++; -+ } else -+ crypto_drivers[hid].cc_qblocked=0; -+ } -+ -+ crypto_all_kqblocked = !list_empty(&crp_kq); -+ -+ /* As above, but for key ops */ -+ krp = NULL; -+ list_for_each_entry(krpp, &crp_kq, krp_next) { -+ cap = crypto_checkdriver(krpp->krp_hid); -+ if (cap == NULL || cap->cc_dev == NULL) { -+ /* -+ * Operation needs to be migrated, invalidate -+ * the assigned device so it will reselect a -+ * new one below. Propagate the original -+ * crid selection flags if supplied. -+ */ -+ krp->krp_hid = krp->krp_crid & -+ (CRYPTOCAP_F_SOFTWARE|CRYPTOCAP_F_HARDWARE); -+ if (krp->krp_hid == 0) -+ krp->krp_hid = -+ CRYPTOCAP_F_SOFTWARE|CRYPTOCAP_F_HARDWARE; -+ break; -+ } -+ if (!cap->cc_kqblocked) { -+ krp = krpp; -+ break; -+ } -+ } -+ if (krp != NULL) { -+ crypto_all_kqblocked = 0; -+ list_del(&krp->krp_next); -+ crypto_drivers[krp->krp_hid].cc_kqblocked = 1; -+ CRYPTO_Q_UNLOCK(); -+ result = crypto_kinvoke(krp, krp->krp_hid); -+ CRYPTO_Q_LOCK(); -+ if (result == ERESTART) { -+ /* -+ * The driver ran out of resources, mark the -+ * driver ``blocked'' for cryptkop's and put -+ * the request back in the queue. It would -+ * best to put the request back where we got -+ * it but that's hard so for now we put it -+ * at the front. This should be ok; putting -+ * it at the end does not work. -+ */ -+ /* XXX validate sid again? */ -+ list_add(&krp->krp_next, &crp_kq); -+ cryptostats.cs_kblocks++; -+ } else -+ crypto_drivers[krp->krp_hid].cc_kqblocked = 0; -+ } -+ -+ if (submit == NULL && krp == NULL) { -+ /* -+ * Nothing more to be processed. Sleep until we're -+ * woken because there are more ops to process. -+ * This happens either by submission or by a driver -+ * becoming unblocked and notifying us through -+ * crypto_unblock. Note that when we wakeup we -+ * start processing each queue again from the -+ * front. It's not clear that it's important to -+ * preserve this ordering since ops may finish -+ * out of order if dispatched to different devices -+ * and some become blocked while others do not. -+ */ -+ dprintk("%s - sleeping (qe=%d qb=%d kqe=%d kqb=%d)\n", -+ __FUNCTION__, -+ list_empty(&crp_q), crypto_all_qblocked, -+ list_empty(&crp_kq), crypto_all_kqblocked); -+ CRYPTO_Q_UNLOCK(); -+ crp_sleep = 1; -+ wait_event_interruptible(cryptoproc_wait, -+ !(list_empty(&crp_q) || crypto_all_qblocked) || -+ !(list_empty(&crp_kq) || crypto_all_kqblocked) || -+ cryptoproc == (pid_t) -1); -+ crp_sleep = 0; -+ if (signal_pending (current)) { -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ spin_lock_irq(¤t->sigmask_lock); -+#endif -+ flush_signals(current); -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ spin_unlock_irq(¤t->sigmask_lock); -+#endif -+ } -+ CRYPTO_Q_LOCK(); -+ dprintk("%s - awake\n", __FUNCTION__); -+ if (cryptoproc == (pid_t) -1) -+ break; -+ cryptostats.cs_intrs++; -+ } -+ } -+ CRYPTO_Q_UNLOCK(); -+ complete_and_exit(&cryptoproc_exited, 0); -+} -+ -+/* -+ * Crypto returns thread, does callbacks for processed crypto requests. -+ * Callbacks are done here, rather than in the crypto drivers, because -+ * callbacks typically are expensive and would slow interrupt handling. -+ */ -+static int -+crypto_ret_proc(void *arg) -+{ -+ struct cryptop *crpt; -+ struct cryptkop *krpt; -+ unsigned long r_flags; -+ -+ ocf_daemonize("crypto_ret"); -+ -+ CRYPTO_RETQ_LOCK(); -+ for (;;) { -+ /* Harvest return q's for completed ops */ -+ crpt = NULL; -+ if (!list_empty(&crp_ret_q)) -+ crpt = list_entry(crp_ret_q.next, typeof(*crpt), crp_next); -+ if (crpt != NULL) -+ list_del(&crpt->crp_next); -+ -+ krpt = NULL; -+ if (!list_empty(&crp_ret_kq)) -+ krpt = list_entry(crp_ret_kq.next, typeof(*krpt), krp_next); -+ if (krpt != NULL) -+ list_del(&krpt->krp_next); -+ -+ if (crpt != NULL || krpt != NULL) { -+ CRYPTO_RETQ_UNLOCK(); -+ /* -+ * Run callbacks unlocked. -+ */ -+ if (crpt != NULL) -+ crpt->crp_callback(crpt); -+ if (krpt != NULL) -+ krpt->krp_callback(krpt); -+ CRYPTO_RETQ_LOCK(); -+ } else { -+ /* -+ * Nothing more to be processed. Sleep until we're -+ * woken because there are more returns to process. -+ */ -+ dprintk("%s - sleeping\n", __FUNCTION__); -+ CRYPTO_RETQ_UNLOCK(); -+ wait_event_interruptible(cryptoretproc_wait, -+ cryptoretproc == (pid_t) -1 || -+ !list_empty(&crp_ret_q) || -+ !list_empty(&crp_ret_kq)); -+ if (signal_pending (current)) { -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ spin_lock_irq(¤t->sigmask_lock); -+#endif -+ flush_signals(current); -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ spin_unlock_irq(¤t->sigmask_lock); -+#endif -+ } -+ CRYPTO_RETQ_LOCK(); -+ dprintk("%s - awake\n", __FUNCTION__); -+ if (cryptoretproc == (pid_t) -1) { -+ dprintk("%s - EXITING!\n", __FUNCTION__); -+ break; -+ } -+ cryptostats.cs_rets++; -+ } -+ } -+ CRYPTO_RETQ_UNLOCK(); -+ complete_and_exit(&cryptoretproc_exited, 0); -+} -+ -+ -+#if 0 /* should put this into /proc or something */ -+static void -+db_show_drivers(void) -+{ -+ int hid; -+ -+ db_printf("%12s %4s %4s %8s %2s %2s\n" -+ , "Device" -+ , "Ses" -+ , "Kops" -+ , "Flags" -+ , "QB" -+ , "KB" -+ ); -+ for (hid = 0; hid < crypto_drivers_num; hid++) { -+ const struct cryptocap *cap = &crypto_drivers[hid]; -+ if (cap->cc_dev == NULL) -+ continue; -+ db_printf("%-12s %4u %4u %08x %2u %2u\n" -+ , device_get_nameunit(cap->cc_dev) -+ , cap->cc_sessions -+ , cap->cc_koperations -+ , cap->cc_flags -+ , cap->cc_qblocked -+ , cap->cc_kqblocked -+ ); -+ } -+} -+ -+DB_SHOW_COMMAND(crypto, db_show_crypto) -+{ -+ struct cryptop *crp; -+ -+ db_show_drivers(); -+ db_printf("\n"); -+ -+ db_printf("%4s %8s %4s %4s %4s %4s %8s %8s\n", -+ "HID", "Caps", "Ilen", "Olen", "Etype", "Flags", -+ "Desc", "Callback"); -+ TAILQ_FOREACH(crp, &crp_q, crp_next) { -+ db_printf("%4u %08x %4u %4u %4u %04x %8p %8p\n" -+ , (int) CRYPTO_SESID2HID(crp->crp_sid) -+ , (int) CRYPTO_SESID2CAPS(crp->crp_sid) -+ , crp->crp_ilen, crp->crp_olen -+ , crp->crp_etype -+ , crp->crp_flags -+ , crp->crp_desc -+ , crp->crp_callback -+ ); -+ } -+ if (!TAILQ_EMPTY(&crp_ret_q)) { -+ db_printf("\n%4s %4s %4s %8s\n", -+ "HID", "Etype", "Flags", "Callback"); -+ TAILQ_FOREACH(crp, &crp_ret_q, crp_next) { -+ db_printf("%4u %4u %04x %8p\n" -+ , (int) CRYPTO_SESID2HID(crp->crp_sid) -+ , crp->crp_etype -+ , crp->crp_flags -+ , crp->crp_callback -+ ); -+ } -+ } -+} -+ -+DB_SHOW_COMMAND(kcrypto, db_show_kcrypto) -+{ -+ struct cryptkop *krp; -+ -+ db_show_drivers(); -+ db_printf("\n"); -+ -+ db_printf("%4s %5s %4s %4s %8s %4s %8s\n", -+ "Op", "Status", "#IP", "#OP", "CRID", "HID", "Callback"); -+ TAILQ_FOREACH(krp, &crp_kq, krp_next) { -+ db_printf("%4u %5u %4u %4u %08x %4u %8p\n" -+ , krp->krp_op -+ , krp->krp_status -+ , krp->krp_iparams, krp->krp_oparams -+ , krp->krp_crid, krp->krp_hid -+ , krp->krp_callback -+ ); -+ } -+ if (!TAILQ_EMPTY(&crp_ret_q)) { -+ db_printf("%4s %5s %8s %4s %8s\n", -+ "Op", "Status", "CRID", "HID", "Callback"); -+ TAILQ_FOREACH(krp, &crp_ret_kq, krp_next) { -+ db_printf("%4u %5u %08x %4u %8p\n" -+ , krp->krp_op -+ , krp->krp_status -+ , krp->krp_crid, krp->krp_hid -+ , krp->krp_callback -+ ); -+ } -+ } -+} -+#endif -+ -+ -+static int -+crypto_init(void) -+{ -+ int error; -+ -+ dprintk("%s(0x%x)\n", __FUNCTION__, (int) crypto_init); -+ -+ if (crypto_initted) -+ return 0; -+ crypto_initted = 1; -+ -+ spin_lock_init(&crypto_drivers_lock); -+ spin_lock_init(&crypto_q_lock); -+ spin_lock_init(&crypto_ret_q_lock); -+ -+ cryptop_zone = kmem_cache_create("cryptop", sizeof(struct cryptop), -+ 0, SLAB_HWCACHE_ALIGN, NULL -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) -+ , NULL -+#endif -+ ); -+ -+ cryptodesc_zone = kmem_cache_create("cryptodesc", sizeof(struct cryptodesc), -+ 0, SLAB_HWCACHE_ALIGN, NULL -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) -+ , NULL -+#endif -+ ); -+ -+ if (cryptodesc_zone == NULL || cryptop_zone == NULL) { -+ printk("crypto: crypto_init cannot setup crypto zones\n"); -+ error = ENOMEM; -+ goto bad; -+ } -+ -+ crypto_drivers_num = CRYPTO_DRIVERS_INITIAL; -+ crypto_drivers = kmalloc(crypto_drivers_num * sizeof(struct cryptocap), -+ GFP_KERNEL); -+ if (crypto_drivers == NULL) { -+ printk("crypto: crypto_init cannot setup crypto drivers\n"); -+ error = ENOMEM; -+ goto bad; -+ } -+ -+ memset(crypto_drivers, 0, crypto_drivers_num * sizeof(struct cryptocap)); -+ -+ init_completion(&cryptoproc_exited); -+ init_completion(&cryptoretproc_exited); -+ -+ cryptoproc = 0; /* to avoid race condition where proc runs first */ -+ cryptoproc = kernel_thread(crypto_proc, NULL, CLONE_FS|CLONE_FILES); -+ if (cryptoproc < 0) { -+ error = cryptoproc; -+ printk("crypto: crypto_init cannot start crypto thread; error %d", -+ error); -+ goto bad; -+ } -+ -+ cryptoretproc = 0; /* to avoid race condition where proc runs first */ -+ cryptoretproc = kernel_thread(crypto_ret_proc, NULL, CLONE_FS|CLONE_FILES); -+ if (cryptoretproc < 0) { -+ error = cryptoretproc; -+ printk("crypto: crypto_init cannot start cryptoret thread; error %d", -+ error); -+ goto bad; -+ } -+ -+ return 0; -+bad: -+ crypto_exit(); -+ return error; -+} -+ -+ -+static void -+crypto_exit(void) -+{ -+ pid_t p; -+ unsigned long d_flags; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ -+ /* -+ * Terminate any crypto threads. -+ */ -+ -+ CRYPTO_DRIVER_LOCK(); -+ p = cryptoproc; -+ cryptoproc = (pid_t) -1; -+ kill_pid(p, SIGTERM, 1); -+ wake_up_interruptible(&cryptoproc_wait); -+ CRYPTO_DRIVER_UNLOCK(); -+ -+ wait_for_completion(&cryptoproc_exited); -+ -+ CRYPTO_DRIVER_LOCK(); -+ p = cryptoretproc; -+ cryptoretproc = (pid_t) -1; -+ kill_pid(p, SIGTERM, 1); -+ wake_up_interruptible(&cryptoretproc_wait); -+ CRYPTO_DRIVER_UNLOCK(); -+ -+ wait_for_completion(&cryptoretproc_exited); -+ -+ /* XXX flush queues??? */ -+ -+ /* -+ * Reclaim dynamically allocated resources. -+ */ -+ if (crypto_drivers != NULL) -+ kfree(crypto_drivers); -+ -+ if (cryptodesc_zone != NULL) -+ kmem_cache_destroy(cryptodesc_zone); -+ if (cryptop_zone != NULL) -+ kmem_cache_destroy(cryptop_zone); -+} -+ -+ -+EXPORT_SYMBOL(crypto_newsession); -+EXPORT_SYMBOL(crypto_freesession); -+EXPORT_SYMBOL(crypto_get_driverid); -+EXPORT_SYMBOL(crypto_kregister); -+EXPORT_SYMBOL(crypto_register); -+EXPORT_SYMBOL(crypto_unregister); -+EXPORT_SYMBOL(crypto_unregister_all); -+EXPORT_SYMBOL(crypto_unblock); -+EXPORT_SYMBOL(crypto_dispatch); -+EXPORT_SYMBOL(crypto_kdispatch); -+EXPORT_SYMBOL(crypto_freereq); -+EXPORT_SYMBOL(crypto_getreq); -+EXPORT_SYMBOL(crypto_done); -+EXPORT_SYMBOL(crypto_kdone); -+EXPORT_SYMBOL(crypto_getfeat); -+EXPORT_SYMBOL(crypto_userasymcrypto); -+EXPORT_SYMBOL(crypto_getcaps); -+EXPORT_SYMBOL(crypto_find_driver); -+EXPORT_SYMBOL(crypto_find_device_byhid); -+ -+module_init(crypto_init); -+module_exit(crypto_exit); -+ -+MODULE_LICENSE("BSD"); -+MODULE_AUTHOR("David McCullough <david_mccullough@securecomputing.com>"); -+MODULE_DESCRIPTION("OCF (OpenBSD Cryptographic Framework)"); -diff -Nur linux-2.6.30.orig/crypto/ocf/cryptodev.c linux-2.6.30/crypto/ocf/cryptodev.c ---- linux-2.6.30.orig/crypto/ocf/cryptodev.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/cryptodev.c 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,1048 @@ -+/* $OpenBSD: cryptodev.c,v 1.52 2002/06/19 07:22:46 deraadt Exp $ */ -+ -+/*- -+ * Linux port done by David McCullough <david_mccullough@securecomputing.com> -+ * Copyright (C) 2006-2007 David McCullough -+ * Copyright (C) 2004-2005 Intel Corporation. -+ * The license and original author are listed below. -+ * -+ * Copyright (c) 2001 Theo de Raadt -+ * Copyright (c) 2002-2006 Sam Leffler, Errno Consulting -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The name of the author may not be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * Effort sponsored in part by the Defense Advanced Research Projects -+ * Agency (DARPA) and Air Force Research Laboratory, Air Force -+ * Materiel Command, USAF, under agreement number F30602-01-2-0537. -+ * -+__FBSDID("$FreeBSD: src/sys/opencrypto/cryptodev.c,v 1.34 2007/05/09 19:37:02 gnn Exp $"); -+ */ -+ -+#ifndef AUTOCONF_INCLUDED -+#include <linux/config.h> -+#endif -+#include <linux/types.h> -+#include <linux/time.h> -+#include <linux/delay.h> -+#include <linux/list.h> -+#include <linux/init.h> -+#include <linux/sched.h> -+#include <linux/unistd.h> -+#include <linux/module.h> -+#include <linux/wait.h> -+#include <linux/slab.h> -+#include <linux/fs.h> -+#include <linux/dcache.h> -+#include <linux/file.h> -+#include <linux/mount.h> -+#include <linux/miscdevice.h> -+#include <linux/version.h> -+#include <asm/uaccess.h> -+ -+#include <cryptodev.h> -+#include <uio.h> -+ -+extern asmlinkage long sys_dup(unsigned int fildes); -+ -+#define debug cryptodev_debug -+int cryptodev_debug = 0; -+module_param(cryptodev_debug, int, 0644); -+MODULE_PARM_DESC(cryptodev_debug, "Enable cryptodev debug"); -+ -+struct csession_info { -+ u_int16_t blocksize; -+ u_int16_t minkey, maxkey; -+ -+ u_int16_t keysize; -+ /* u_int16_t hashsize; */ -+ u_int16_t authsize; -+ /* u_int16_t ctxsize; */ -+}; -+ -+struct csession { -+ struct list_head list; -+ u_int64_t sid; -+ u_int32_t ses; -+ -+ wait_queue_head_t waitq; -+ -+ u_int32_t cipher; -+ -+ u_int32_t mac; -+ -+ caddr_t key; -+ int keylen; -+ u_char tmp_iv[EALG_MAX_BLOCK_LEN]; -+ -+ caddr_t mackey; -+ int mackeylen; -+ -+ struct csession_info info; -+ -+ struct iovec iovec; -+ struct uio uio; -+ int error; -+}; -+ -+struct fcrypt { -+ struct list_head csessions; -+ int sesn; -+}; -+ -+static struct csession *csefind(struct fcrypt *, u_int); -+static int csedelete(struct fcrypt *, struct csession *); -+static struct csession *cseadd(struct fcrypt *, struct csession *); -+static struct csession *csecreate(struct fcrypt *, u_int64_t, -+ struct cryptoini *crie, struct cryptoini *cria, struct csession_info *); -+static int csefree(struct csession *); -+ -+static int cryptodev_op(struct csession *, struct crypt_op *); -+static int cryptodev_key(struct crypt_kop *); -+static int cryptodev_find(struct crypt_find_op *); -+ -+static int cryptodev_cb(void *); -+static int cryptodev_open(struct inode *inode, struct file *filp); -+ -+/* -+ * Check a crypto identifier to see if it requested -+ * a valid crid and it's capabilities match. -+ */ -+static int -+checkcrid(int crid) -+{ -+ int hid = crid & ~(CRYPTOCAP_F_SOFTWARE | CRYPTOCAP_F_HARDWARE); -+ int typ = crid & (CRYPTOCAP_F_SOFTWARE | CRYPTOCAP_F_HARDWARE); -+ int caps = 0; -+ -+ /* if the user hasn't selected a driver, then just call newsession */ -+ if (hid == 0 && typ != 0) -+ return 0; -+ -+ caps = crypto_getcaps(hid); -+ -+ /* didn't find anything with capabilities */ -+ if (caps == 0) { -+ dprintk("%s: hid=%x typ=%x not matched\n", __FUNCTION__, hid, typ); -+ return EINVAL; -+ } -+ -+ /* the user didn't specify SW or HW, so the driver is ok */ -+ if (typ == 0) -+ return 0; -+ -+ /* if the type specified didn't match */ -+ if (typ != (caps & (CRYPTOCAP_F_SOFTWARE | CRYPTOCAP_F_HARDWARE))) { -+ dprintk("%s: hid=%x typ=%x caps=%x not matched\n", __FUNCTION__, -+ hid, typ, caps); -+ return EINVAL; -+ } -+ -+ return 0; -+} -+ -+static int -+cryptodev_op(struct csession *cse, struct crypt_op *cop) -+{ -+ struct cryptop *crp = NULL; -+ struct cryptodesc *crde = NULL, *crda = NULL; -+ int error = 0; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ if (cop->len > CRYPTO_MAX_DATA_LEN) { -+ dprintk("%s: %d > %d\n", __FUNCTION__, cop->len, CRYPTO_MAX_DATA_LEN); -+ return (E2BIG); -+ } -+ -+ if (cse->info.blocksize && (cop->len % cse->info.blocksize) != 0) { -+ dprintk("%s: blocksize=%d len=%d\n", __FUNCTION__, cse->info.blocksize, -+ cop->len); -+ return (EINVAL); -+ } -+ -+ cse->uio.uio_iov = &cse->iovec; -+ cse->uio.uio_iovcnt = 1; -+ cse->uio.uio_offset = 0; -+#if 0 -+ cse->uio.uio_resid = cop->len; -+ cse->uio.uio_segflg = UIO_SYSSPACE; -+ cse->uio.uio_rw = UIO_WRITE; -+ cse->uio.uio_td = td; -+#endif -+ cse->uio.uio_iov[0].iov_len = cop->len; -+ if (cse->info.authsize) -+ cse->uio.uio_iov[0].iov_len += cse->info.authsize; -+ cse->uio.uio_iov[0].iov_base = kmalloc(cse->uio.uio_iov[0].iov_len, -+ GFP_KERNEL); -+ -+ if (cse->uio.uio_iov[0].iov_base == NULL) { -+ dprintk("%s: iov_base kmalloc(%d) failed\n", __FUNCTION__, -+ cse->uio.uio_iov[0].iov_len); -+ return (ENOMEM); -+ } -+ -+ crp = crypto_getreq((cse->info.blocksize != 0) + (cse->info.authsize != 0)); -+ if (crp == NULL) { -+ dprintk("%s: ENOMEM\n", __FUNCTION__); -+ error = ENOMEM; -+ goto bail; -+ } -+ -+ if (cse->info.authsize) { -+ crda = crp->crp_desc; -+ if (cse->info.blocksize) -+ crde = crda->crd_next; -+ } else { -+ if (cse->info.blocksize) -+ crde = crp->crp_desc; -+ else { -+ dprintk("%s: bad request\n", __FUNCTION__); -+ error = EINVAL; -+ goto bail; -+ } -+ } -+ -+ if ((error = copy_from_user(cse->uio.uio_iov[0].iov_base, cop->src, -+ cop->len))) { -+ dprintk("%s: bad copy\n", __FUNCTION__); -+ goto bail; -+ } -+ -+ if (crda) { -+ crda->crd_skip = 0; -+ crda->crd_len = cop->len; -+ crda->crd_inject = cop->len; -+ -+ crda->crd_alg = cse->mac; -+ crda->crd_key = cse->mackey; -+ crda->crd_klen = cse->mackeylen * 8; -+ } -+ -+ if (crde) { -+ if (cop->op == COP_ENCRYPT) -+ crde->crd_flags |= CRD_F_ENCRYPT; -+ else -+ crde->crd_flags &= ~CRD_F_ENCRYPT; -+ crde->crd_len = cop->len; -+ crde->crd_inject = 0; -+ -+ crde->crd_alg = cse->cipher; -+ crde->crd_key = cse->key; -+ crde->crd_klen = cse->keylen * 8; -+ } -+ -+ crp->crp_ilen = cse->uio.uio_iov[0].iov_len; -+ crp->crp_flags = CRYPTO_F_IOV | CRYPTO_F_CBIMM -+ | (cop->flags & COP_F_BATCH); -+ crp->crp_buf = (caddr_t)&cse->uio; -+ crp->crp_callback = (int (*) (struct cryptop *)) cryptodev_cb; -+ crp->crp_sid = cse->sid; -+ crp->crp_opaque = (void *)cse; -+ -+ if (cop->iv) { -+ if (crde == NULL) { -+ error = EINVAL; -+ dprintk("%s no crde\n", __FUNCTION__); -+ goto bail; -+ } -+ if (cse->cipher == CRYPTO_ARC4) { /* XXX use flag? */ -+ error = EINVAL; -+ dprintk("%s arc4 with IV\n", __FUNCTION__); -+ goto bail; -+ } -+ if ((error = copy_from_user(cse->tmp_iv, cop->iv, -+ cse->info.blocksize))) { -+ dprintk("%s bad iv copy\n", __FUNCTION__); -+ goto bail; -+ } -+ memcpy(crde->crd_iv, cse->tmp_iv, cse->info.blocksize); -+ crde->crd_flags |= CRD_F_IV_EXPLICIT | CRD_F_IV_PRESENT; -+ crde->crd_skip = 0; -+ } else if (cse->cipher == CRYPTO_ARC4) { /* XXX use flag? */ -+ crde->crd_skip = 0; -+ } else if (crde) { -+ crde->crd_flags |= CRD_F_IV_PRESENT; -+ crde->crd_skip = cse->info.blocksize; -+ crde->crd_len -= cse->info.blocksize; -+ } -+ -+ if (cop->mac && crda == NULL) { -+ error = EINVAL; -+ dprintk("%s no crda\n", __FUNCTION__); -+ goto bail; -+ } -+ -+ /* -+ * Let the dispatch run unlocked, then, interlock against the -+ * callback before checking if the operation completed and going -+ * to sleep. This insures drivers don't inherit our lock which -+ * results in a lock order reversal between crypto_dispatch forced -+ * entry and the crypto_done callback into us. -+ */ -+ error = crypto_dispatch(crp); -+ if (error == 0) { -+ dprintk("%s about to WAIT\n", __FUNCTION__); -+ /* -+ * we really need to wait for driver to complete to maintain -+ * state, luckily interrupts will be remembered -+ */ -+ do { -+ error = wait_event_interruptible(crp->crp_waitq, -+ ((crp->crp_flags & CRYPTO_F_DONE) != 0)); -+ /* -+ * we can't break out of this loop or we will leave behind -+ * a huge mess, however, staying here means if your driver -+ * is broken user applications can hang and not be killed. -+ * The solution, fix your driver :-) -+ */ -+ if (error) { -+ schedule(); -+ error = 0; -+ } -+ } while ((crp->crp_flags & CRYPTO_F_DONE) == 0); -+ dprintk("%s finished WAITING error=%d\n", __FUNCTION__, error); -+ } -+ -+ if (crp->crp_etype != 0) { -+ error = crp->crp_etype; -+ dprintk("%s error in crp processing\n", __FUNCTION__); -+ goto bail; -+ } -+ -+ if (cse->error) { -+ error = cse->error; -+ dprintk("%s error in cse processing\n", __FUNCTION__); -+ goto bail; -+ } -+ -+ if (cop->dst && (error = copy_to_user(cop->dst, -+ cse->uio.uio_iov[0].iov_base, cop->len))) { -+ dprintk("%s bad dst copy\n", __FUNCTION__); -+ goto bail; -+ } -+ -+ if (cop->mac && -+ (error=copy_to_user(cop->mac, -+ (caddr_t)cse->uio.uio_iov[0].iov_base + cop->len, -+ cse->info.authsize))) { -+ dprintk("%s bad mac copy\n", __FUNCTION__); -+ goto bail; -+ } -+ -+bail: -+ if (crp) -+ crypto_freereq(crp); -+ if (cse->uio.uio_iov[0].iov_base) -+ kfree(cse->uio.uio_iov[0].iov_base); -+ -+ return (error); -+} -+ -+static int -+cryptodev_cb(void *op) -+{ -+ struct cryptop *crp = (struct cryptop *) op; -+ struct csession *cse = (struct csession *)crp->crp_opaque; -+ int error; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ error = crp->crp_etype; -+ if (error == EAGAIN) { -+ crp->crp_flags &= ~CRYPTO_F_DONE; -+#ifdef NOTYET -+ /* -+ * DAVIDM I am fairly sure that we should turn this into a batch -+ * request to stop bad karma/lockup, revisit -+ */ -+ crp->crp_flags |= CRYPTO_F_BATCH; -+#endif -+ return crypto_dispatch(crp); -+ } -+ if (error != 0 || (crp->crp_flags & CRYPTO_F_DONE)) { -+ cse->error = error; -+ wake_up_interruptible(&crp->crp_waitq); -+ } -+ return (0); -+} -+ -+static int -+cryptodevkey_cb(void *op) -+{ -+ struct cryptkop *krp = (struct cryptkop *) op; -+ dprintk("%s()\n", __FUNCTION__); -+ wake_up_interruptible(&krp->krp_waitq); -+ return (0); -+} -+ -+static int -+cryptodev_key(struct crypt_kop *kop) -+{ -+ struct cryptkop *krp = NULL; -+ int error = EINVAL; -+ int in, out, size, i; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ if (kop->crk_iparams + kop->crk_oparams > CRK_MAXPARAM) { -+ dprintk("%s params too big\n", __FUNCTION__); -+ return (EFBIG); -+ } -+ -+ in = kop->crk_iparams; -+ out = kop->crk_oparams; -+ switch (kop->crk_op) { -+ case CRK_MOD_EXP: -+ if (in == 3 && out == 1) -+ break; -+ return (EINVAL); -+ case CRK_MOD_EXP_CRT: -+ if (in == 6 && out == 1) -+ break; -+ return (EINVAL); -+ case CRK_DSA_SIGN: -+ if (in == 5 && out == 2) -+ break; -+ return (EINVAL); -+ case CRK_DSA_VERIFY: -+ if (in == 7 && out == 0) -+ break; -+ return (EINVAL); -+ case CRK_DH_COMPUTE_KEY: -+ if (in == 3 && out == 1) -+ break; -+ return (EINVAL); -+ default: -+ return (EINVAL); -+ } -+ -+ krp = (struct cryptkop *)kmalloc(sizeof *krp, GFP_KERNEL); -+ if (!krp) -+ return (ENOMEM); -+ bzero(krp, sizeof *krp); -+ krp->krp_op = kop->crk_op; -+ krp->krp_status = kop->crk_status; -+ krp->krp_iparams = kop->crk_iparams; -+ krp->krp_oparams = kop->crk_oparams; -+ krp->krp_crid = kop->crk_crid; -+ krp->krp_status = 0; -+ krp->krp_flags = CRYPTO_KF_CBIMM; -+ krp->krp_callback = (int (*) (struct cryptkop *)) cryptodevkey_cb; -+ init_waitqueue_head(&krp->krp_waitq); -+ -+ for (i = 0; i < CRK_MAXPARAM; i++) -+ krp->krp_param[i].crp_nbits = kop->crk_param[i].crp_nbits; -+ for (i = 0; i < krp->krp_iparams + krp->krp_oparams; i++) { -+ size = (krp->krp_param[i].crp_nbits + 7) / 8; -+ if (size == 0) -+ continue; -+ krp->krp_param[i].crp_p = (caddr_t) kmalloc(size, GFP_KERNEL); -+ if (i >= krp->krp_iparams) -+ continue; -+ error = copy_from_user(krp->krp_param[i].crp_p, -+ kop->crk_param[i].crp_p, size); -+ if (error) -+ goto fail; -+ } -+ -+ error = crypto_kdispatch(krp); -+ if (error) -+ goto fail; -+ -+ do { -+ error = wait_event_interruptible(krp->krp_waitq, -+ ((krp->krp_flags & CRYPTO_KF_DONE) != 0)); -+ /* -+ * we can't break out of this loop or we will leave behind -+ * a huge mess, however, staying here means if your driver -+ * is broken user applications can hang and not be killed. -+ * The solution, fix your driver :-) -+ */ -+ if (error) { -+ schedule(); -+ error = 0; -+ } -+ } while ((krp->krp_flags & CRYPTO_KF_DONE) == 0); -+ -+ dprintk("%s finished WAITING error=%d\n", __FUNCTION__, error); -+ -+ kop->crk_crid = krp->krp_crid; /* device that did the work */ -+ if (krp->krp_status != 0) { -+ error = krp->krp_status; -+ goto fail; -+ } -+ -+ for (i = krp->krp_iparams; i < krp->krp_iparams + krp->krp_oparams; i++) { -+ size = (krp->krp_param[i].crp_nbits + 7) / 8; -+ if (size == 0) -+ continue; -+ error = copy_to_user(kop->crk_param[i].crp_p, krp->krp_param[i].crp_p, -+ size); -+ if (error) -+ goto fail; -+ } -+ -+fail: -+ if (krp) { -+ kop->crk_status = krp->krp_status; -+ for (i = 0; i < CRK_MAXPARAM; i++) { -+ if (krp->krp_param[i].crp_p) -+ kfree(krp->krp_param[i].crp_p); -+ } -+ kfree(krp); -+ } -+ return (error); -+} -+ -+static int -+cryptodev_find(struct crypt_find_op *find) -+{ -+ device_t dev; -+ -+ if (find->crid != -1) { -+ dev = crypto_find_device_byhid(find->crid); -+ if (dev == NULL) -+ return (ENOENT); -+ strlcpy(find->name, device_get_nameunit(dev), -+ sizeof(find->name)); -+ } else { -+ find->crid = crypto_find_driver(find->name); -+ if (find->crid == -1) -+ return (ENOENT); -+ } -+ return (0); -+} -+ -+static struct csession * -+csefind(struct fcrypt *fcr, u_int ses) -+{ -+ struct csession *cse; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ list_for_each_entry(cse, &fcr->csessions, list) -+ if (cse->ses == ses) -+ return (cse); -+ return (NULL); -+} -+ -+static int -+csedelete(struct fcrypt *fcr, struct csession *cse_del) -+{ -+ struct csession *cse; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ list_for_each_entry(cse, &fcr->csessions, list) { -+ if (cse == cse_del) { -+ list_del(&cse->list); -+ return (1); -+ } -+ } -+ return (0); -+} -+ -+static struct csession * -+cseadd(struct fcrypt *fcr, struct csession *cse) -+{ -+ dprintk("%s()\n", __FUNCTION__); -+ list_add_tail(&cse->list, &fcr->csessions); -+ cse->ses = fcr->sesn++; -+ return (cse); -+} -+ -+static struct csession * -+csecreate(struct fcrypt *fcr, u_int64_t sid, struct cryptoini *crie, -+ struct cryptoini *cria, struct csession_info *info) -+{ -+ struct csession *cse; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ cse = (struct csession *) kmalloc(sizeof(struct csession), GFP_KERNEL); -+ if (cse == NULL) -+ return NULL; -+ memset(cse, 0, sizeof(struct csession)); -+ -+ INIT_LIST_HEAD(&cse->list); -+ init_waitqueue_head(&cse->waitq); -+ -+ cse->key = crie->cri_key; -+ cse->keylen = crie->cri_klen/8; -+ cse->mackey = cria->cri_key; -+ cse->mackeylen = cria->cri_klen/8; -+ cse->sid = sid; -+ cse->cipher = crie->cri_alg; -+ cse->mac = cria->cri_alg; -+ cse->info = *info; -+ cseadd(fcr, cse); -+ return (cse); -+} -+ -+static int -+csefree(struct csession *cse) -+{ -+ int error; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ error = crypto_freesession(cse->sid); -+ if (cse->key) -+ kfree(cse->key); -+ if (cse->mackey) -+ kfree(cse->mackey); -+ kfree(cse); -+ return(error); -+} -+ -+static int -+cryptodev_ioctl( -+ struct inode *inode, -+ struct file *filp, -+ unsigned int cmd, -+ unsigned long arg) -+{ -+ struct cryptoini cria, crie; -+ struct fcrypt *fcr = filp->private_data; -+ struct csession *cse; -+ struct csession_info info; -+ struct session2_op sop; -+ struct crypt_op cop; -+ struct crypt_kop kop; -+ struct crypt_find_op fop; -+ u_int64_t sid; -+ u_int32_t ses; -+ int feat, fd, error = 0, crid; -+ mm_segment_t fs; -+ -+ dprintk("%s(cmd=%x arg=%lx)\n", __FUNCTION__, cmd, arg); -+ -+ switch (cmd) { -+ -+ case CRIOGET: { -+ dprintk("%s(CRIOGET)\n", __FUNCTION__); -+ fs = get_fs(); -+ set_fs(get_ds()); -+ for (fd = 0; fd < files_fdtable(current->files)->max_fds; fd++) -+ if (files_fdtable(current->files)->fd[fd] == filp) -+ break; -+ fd = sys_dup(fd); -+ set_fs(fs); -+ put_user(fd, (int *) arg); -+ return IS_ERR_VALUE(fd) ? fd : 0; -+ } -+ -+#define CIOCGSESSSTR (cmd == CIOCGSESSION ? "CIOCGSESSION" : "CIOCGSESSION2") -+ case CIOCGSESSION: -+ case CIOCGSESSION2: -+ dprintk("%s(%s)\n", __FUNCTION__, CIOCGSESSSTR); -+ memset(&crie, 0, sizeof(crie)); -+ memset(&cria, 0, sizeof(cria)); -+ memset(&info, 0, sizeof(info)); -+ memset(&sop, 0, sizeof(sop)); -+ -+ if (copy_from_user(&sop, (void*)arg, (cmd == CIOCGSESSION) ? -+ sizeof(struct session_op) : sizeof(sop))) { -+ dprintk("%s(%s) - bad copy\n", __FUNCTION__, CIOCGSESSSTR); -+ error = EFAULT; -+ goto bail; -+ } -+ -+ switch (sop.cipher) { -+ case 0: -+ dprintk("%s(%s) - no cipher\n", __FUNCTION__, CIOCGSESSSTR); -+ break; -+ case CRYPTO_NULL_CBC: -+ info.blocksize = NULL_BLOCK_LEN; -+ info.minkey = NULL_MIN_KEY_LEN; -+ info.maxkey = NULL_MAX_KEY_LEN; -+ break; -+ case CRYPTO_DES_CBC: -+ info.blocksize = DES_BLOCK_LEN; -+ info.minkey = DES_MIN_KEY_LEN; -+ info.maxkey = DES_MAX_KEY_LEN; -+ break; -+ case CRYPTO_3DES_CBC: -+ info.blocksize = DES3_BLOCK_LEN; -+ info.minkey = DES3_MIN_KEY_LEN; -+ info.maxkey = DES3_MAX_KEY_LEN; -+ break; -+ case CRYPTO_BLF_CBC: -+ info.blocksize = BLOWFISH_BLOCK_LEN; -+ info.minkey = BLOWFISH_MIN_KEY_LEN; -+ info.maxkey = BLOWFISH_MAX_KEY_LEN; -+ break; -+ case CRYPTO_CAST_CBC: -+ info.blocksize = CAST128_BLOCK_LEN; -+ info.minkey = CAST128_MIN_KEY_LEN; -+ info.maxkey = CAST128_MAX_KEY_LEN; -+ break; -+ case CRYPTO_SKIPJACK_CBC: -+ info.blocksize = SKIPJACK_BLOCK_LEN; -+ info.minkey = SKIPJACK_MIN_KEY_LEN; -+ info.maxkey = SKIPJACK_MAX_KEY_LEN; -+ break; -+ case CRYPTO_AES_CBC: -+ info.blocksize = AES_BLOCK_LEN; -+ info.minkey = AES_MIN_KEY_LEN; -+ info.maxkey = AES_MAX_KEY_LEN; -+ break; -+ case CRYPTO_ARC4: -+ info.blocksize = ARC4_BLOCK_LEN; -+ info.minkey = ARC4_MIN_KEY_LEN; -+ info.maxkey = ARC4_MAX_KEY_LEN; -+ break; -+ case CRYPTO_CAMELLIA_CBC: -+ info.blocksize = CAMELLIA_BLOCK_LEN; -+ info.minkey = CAMELLIA_MIN_KEY_LEN; -+ info.maxkey = CAMELLIA_MAX_KEY_LEN; -+ break; -+ default: -+ dprintk("%s(%s) - bad cipher\n", __FUNCTION__, CIOCGSESSSTR); -+ error = EINVAL; -+ goto bail; -+ } -+ -+ switch (sop.mac) { -+ case 0: -+ dprintk("%s(%s) - no mac\n", __FUNCTION__, CIOCGSESSSTR); -+ break; -+ case CRYPTO_NULL_HMAC: -+ info.authsize = NULL_HASH_LEN; -+ break; -+ case CRYPTO_MD5: -+ info.authsize = MD5_HASH_LEN; -+ break; -+ case CRYPTO_SHA1: -+ info.authsize = SHA1_HASH_LEN; -+ break; -+ case CRYPTO_SHA2_256: -+ info.authsize = SHA2_256_HASH_LEN; -+ break; -+ case CRYPTO_SHA2_384: -+ info.authsize = SHA2_384_HASH_LEN; -+ break; -+ case CRYPTO_SHA2_512: -+ info.authsize = SHA2_512_HASH_LEN; -+ break; -+ case CRYPTO_RIPEMD160: -+ info.authsize = RIPEMD160_HASH_LEN; -+ break; -+ case CRYPTO_MD5_HMAC: -+ info.authsize = MD5_HASH_LEN; -+ break; -+ case CRYPTO_SHA1_HMAC: -+ info.authsize = SHA1_HASH_LEN; -+ break; -+ case CRYPTO_SHA2_256_HMAC: -+ info.authsize = SHA2_256_HASH_LEN; -+ break; -+ case CRYPTO_SHA2_384_HMAC: -+ info.authsize = SHA2_384_HASH_LEN; -+ break; -+ case CRYPTO_SHA2_512_HMAC: -+ info.authsize = SHA2_512_HASH_LEN; -+ break; -+ case CRYPTO_RIPEMD160_HMAC: -+ info.authsize = RIPEMD160_HASH_LEN; -+ break; -+ default: -+ dprintk("%s(%s) - bad mac\n", __FUNCTION__, CIOCGSESSSTR); -+ error = EINVAL; -+ goto bail; -+ } -+ -+ if (info.blocksize) { -+ crie.cri_alg = sop.cipher; -+ crie.cri_klen = sop.keylen * 8; -+ if ((info.maxkey && sop.keylen > info.maxkey) || -+ sop.keylen < info.minkey) { -+ dprintk("%s(%s) - bad key\n", __FUNCTION__, CIOCGSESSSTR); -+ error = EINVAL; -+ goto bail; -+ } -+ -+ crie.cri_key = (u_int8_t *) kmalloc(crie.cri_klen/8+1, GFP_KERNEL); -+ if (copy_from_user(crie.cri_key, sop.key, -+ crie.cri_klen/8)) { -+ dprintk("%s(%s) - bad copy\n", __FUNCTION__, CIOCGSESSSTR); -+ error = EFAULT; -+ goto bail; -+ } -+ if (info.authsize) -+ crie.cri_next = &cria; -+ } -+ -+ if (info.authsize) { -+ cria.cri_alg = sop.mac; -+ cria.cri_klen = sop.mackeylen * 8; -+ if ((info.maxkey && sop.mackeylen > info.maxkey) || -+ sop.keylen < info.minkey) { -+ dprintk("%s(%s) - mackeylen %d\n", __FUNCTION__, CIOCGSESSSTR, -+ sop.mackeylen); -+ error = EINVAL; -+ goto bail; -+ } -+ -+ if (cria.cri_klen) { -+ cria.cri_key = (u_int8_t *) kmalloc(cria.cri_klen/8,GFP_KERNEL); -+ if (copy_from_user(cria.cri_key, sop.mackey, -+ cria.cri_klen / 8)) { -+ dprintk("%s(%s) - bad copy\n", __FUNCTION__, CIOCGSESSSTR); -+ error = EFAULT; -+ goto bail; -+ } -+ } -+ } -+ -+ /* NB: CIOGSESSION2 has the crid */ -+ if (cmd == CIOCGSESSION2) { -+ crid = sop.crid; -+ error = checkcrid(crid); -+ if (error) { -+ dprintk("%s(%s) - checkcrid %x\n", __FUNCTION__, -+ CIOCGSESSSTR, error); -+ goto bail; -+ } -+ } else { -+ /* allow either HW or SW to be used */ -+ crid = CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE; -+ } -+ error = crypto_newsession(&sid, (info.blocksize ? &crie : &cria), crid); -+ if (error) { -+ dprintk("%s(%s) - newsession %d\n",__FUNCTION__,CIOCGSESSSTR,error); -+ goto bail; -+ } -+ -+ cse = csecreate(fcr, sid, &crie, &cria, &info); -+ if (cse == NULL) { -+ crypto_freesession(sid); -+ error = EINVAL; -+ dprintk("%s(%s) - csecreate failed\n", __FUNCTION__, CIOCGSESSSTR); -+ goto bail; -+ } -+ sop.ses = cse->ses; -+ -+ if (cmd == CIOCGSESSION2) { -+ /* return hardware/driver id */ -+ sop.crid = CRYPTO_SESID2HID(cse->sid); -+ } -+ -+ if (copy_to_user((void*)arg, &sop, (cmd == CIOCGSESSION) ? -+ sizeof(struct session_op) : sizeof(sop))) { -+ dprintk("%s(%s) - bad copy\n", __FUNCTION__, CIOCGSESSSTR); -+ error = EFAULT; -+ } -+bail: -+ if (error) { -+ dprintk("%s(%s) - bail %d\n", __FUNCTION__, CIOCGSESSSTR, error); -+ if (crie.cri_key) -+ kfree(crie.cri_key); -+ if (cria.cri_key) -+ kfree(cria.cri_key); -+ } -+ break; -+ case CIOCFSESSION: -+ dprintk("%s(CIOCFSESSION)\n", __FUNCTION__); -+ get_user(ses, (uint32_t*)arg); -+ cse = csefind(fcr, ses); -+ if (cse == NULL) { -+ error = EINVAL; -+ dprintk("%s(CIOCFSESSION) - Fail %d\n", __FUNCTION__, error); -+ break; -+ } -+ csedelete(fcr, cse); -+ error = csefree(cse); -+ break; -+ case CIOCCRYPT: -+ dprintk("%s(CIOCCRYPT)\n", __FUNCTION__); -+ if(copy_from_user(&cop, (void*)arg, sizeof(cop))) { -+ dprintk("%s(CIOCCRYPT) - bad copy\n", __FUNCTION__); -+ error = EFAULT; -+ goto bail; -+ } -+ cse = csefind(fcr, cop.ses); -+ if (cse == NULL) { -+ error = EINVAL; -+ dprintk("%s(CIOCCRYPT) - Fail %d\n", __FUNCTION__, error); -+ break; -+ } -+ error = cryptodev_op(cse, &cop); -+ if(copy_to_user((void*)arg, &cop, sizeof(cop))) { -+ dprintk("%s(CIOCCRYPT) - bad return copy\n", __FUNCTION__); -+ error = EFAULT; -+ goto bail; -+ } -+ break; -+ case CIOCKEY: -+ case CIOCKEY2: -+ dprintk("%s(CIOCKEY)\n", __FUNCTION__); -+ if (!crypto_userasymcrypto) -+ return (EPERM); /* XXX compat? */ -+ if(copy_from_user(&kop, (void*)arg, sizeof(kop))) { -+ dprintk("%s(CIOCKEY) - bad copy\n", __FUNCTION__); -+ error = EFAULT; -+ goto bail; -+ } -+ if (cmd == CIOCKEY) { -+ /* NB: crypto core enforces s/w driver use */ -+ kop.crk_crid = -+ CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE; -+ } -+ error = cryptodev_key(&kop); -+ if(copy_to_user((void*)arg, &kop, sizeof(kop))) { -+ dprintk("%s(CIOCGKEY) - bad return copy\n", __FUNCTION__); -+ error = EFAULT; -+ goto bail; -+ } -+ break; -+ case CIOCASYMFEAT: -+ dprintk("%s(CIOCASYMFEAT)\n", __FUNCTION__); -+ if (!crypto_userasymcrypto) { -+ /* -+ * NB: if user asym crypto operations are -+ * not permitted return "no algorithms" -+ * so well-behaved applications will just -+ * fallback to doing them in software. -+ */ -+ feat = 0; -+ } else -+ error = crypto_getfeat(&feat); -+ if (!error) { -+ error = copy_to_user((void*)arg, &feat, sizeof(feat)); -+ } -+ break; -+ case CIOCFINDDEV: -+ if (copy_from_user(&fop, (void*)arg, sizeof(fop))) { -+ dprintk("%s(CIOCFINDDEV) - bad copy\n", __FUNCTION__); -+ error = EFAULT; -+ goto bail; -+ } -+ error = cryptodev_find(&fop); -+ if (copy_to_user((void*)arg, &fop, sizeof(fop))) { -+ dprintk("%s(CIOCFINDDEV) - bad return copy\n", __FUNCTION__); -+ error = EFAULT; -+ goto bail; -+ } -+ break; -+ default: -+ dprintk("%s(unknown ioctl 0x%x)\n", __FUNCTION__, cmd); -+ error = EINVAL; -+ break; -+ } -+ return(-error); -+} -+ -+#ifdef HAVE_UNLOCKED_IOCTL -+static long -+cryptodev_unlocked_ioctl( -+ struct file *filp, -+ unsigned int cmd, -+ unsigned long arg) -+{ -+ return cryptodev_ioctl(NULL, filp, cmd, arg); -+} -+#endif -+ -+static int -+cryptodev_open(struct inode *inode, struct file *filp) -+{ -+ struct fcrypt *fcr; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ if (filp->private_data) { -+ printk("cryptodev: Private data already exists !\n"); -+ return(0); -+ } -+ -+ fcr = kmalloc(sizeof(*fcr), GFP_KERNEL); -+ if (!fcr) { -+ dprintk("%s() - malloc failed\n", __FUNCTION__); -+ return(-ENOMEM); -+ } -+ memset(fcr, 0, sizeof(*fcr)); -+ -+ INIT_LIST_HEAD(&fcr->csessions); -+ filp->private_data = fcr; -+ return(0); -+} -+ -+static int -+cryptodev_release(struct inode *inode, struct file *filp) -+{ -+ struct fcrypt *fcr = filp->private_data; -+ struct csession *cse, *tmp; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ if (!filp) { -+ printk("cryptodev: No private data on release\n"); -+ return(0); -+ } -+ -+ list_for_each_entry_safe(cse, tmp, &fcr->csessions, list) { -+ list_del(&cse->list); -+ (void)csefree(cse); -+ } -+ filp->private_data = NULL; -+ kfree(fcr); -+ return(0); -+} -+ -+static struct file_operations cryptodev_fops = { -+ .owner = THIS_MODULE, -+ .open = cryptodev_open, -+ .release = cryptodev_release, -+ .ioctl = cryptodev_ioctl, -+#ifdef HAVE_UNLOCKED_IOCTL -+ .unlocked_ioctl = cryptodev_unlocked_ioctl, -+#endif -+}; -+ -+static struct miscdevice cryptodev = { -+ .minor = CRYPTODEV_MINOR, -+ .name = "crypto", -+ .fops = &cryptodev_fops, -+}; -+ -+static int __init -+cryptodev_init(void) -+{ -+ int rc; -+ -+ dprintk("%s(%p)\n", __FUNCTION__, cryptodev_init); -+ rc = misc_register(&cryptodev); -+ if (rc) { -+ printk(KERN_ERR "cryptodev: registration of /dev/crypto failed\n"); -+ return(rc); -+ } -+ -+ return(0); -+} -+ -+static void __exit -+cryptodev_exit(void) -+{ -+ dprintk("%s()\n", __FUNCTION__); -+ misc_deregister(&cryptodev); -+} -+ -+module_init(cryptodev_init); -+module_exit(cryptodev_exit); -+ -+MODULE_LICENSE("BSD"); -+MODULE_AUTHOR("David McCullough <david_mccullough@securecomputing.com>"); -+MODULE_DESCRIPTION("Cryptodev (user interface to OCF)"); -diff -Nur linux-2.6.30.orig/crypto/ocf/cryptodev.h linux-2.6.30/crypto/ocf/cryptodev.h ---- linux-2.6.30.orig/crypto/ocf/cryptodev.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/cryptodev.h 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,478 @@ -+/* $FreeBSD: src/sys/opencrypto/cryptodev.h,v 1.25 2007/05/09 19:37:02 gnn Exp $ */ -+/* $OpenBSD: cryptodev.h,v 1.31 2002/06/11 11:14:29 beck Exp $ */ -+ -+/*- -+ * Linux port done by David McCullough <david_mccullough@securecomputing.com> -+ * Copyright (C) 2006-2007 David McCullough -+ * Copyright (C) 2004-2005 Intel Corporation. -+ * The license and original author are listed below. -+ * -+ * The author of this code is Angelos D. Keromytis (angelos@cis.upenn.edu) -+ * Copyright (c) 2002-2006 Sam Leffler, Errno Consulting -+ * -+ * This code was written by Angelos D. Keromytis in Athens, Greece, in -+ * February 2000. Network Security Technologies Inc. (NSTI) kindly -+ * supported the development of this code. -+ * -+ * Copyright (c) 2000 Angelos D. Keromytis -+ * -+ * Permission to use, copy, and modify this software with or without fee -+ * is hereby granted, provided that this entire notice is included in -+ * all source code copies of any software which is or includes a copy or -+ * modification of this software. -+ * -+ * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR -+ * IMPLIED WARRANTY. IN PARTICULAR, NONE OF THE AUTHORS MAKES ANY -+ * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE -+ * MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR -+ * PURPOSE. -+ * -+ * Copyright (c) 2001 Theo de Raadt -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The name of the author may not be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * Effort sponsored in part by the Defense Advanced Research Projects -+ * Agency (DARPA) and Air Force Research Laboratory, Air Force -+ * Materiel Command, USAF, under agreement number F30602-01-2-0537. -+ * -+ */ -+ -+#ifndef _CRYPTO_CRYPTO_H_ -+#define _CRYPTO_CRYPTO_H_ -+ -+/* Some initial values */ -+#define CRYPTO_DRIVERS_INITIAL 4 -+#define CRYPTO_SW_SESSIONS 32 -+ -+/* Hash values */ -+#define NULL_HASH_LEN 0 -+#define MD5_HASH_LEN 16 -+#define SHA1_HASH_LEN 20 -+#define RIPEMD160_HASH_LEN 20 -+#define SHA2_256_HASH_LEN 32 -+#define SHA2_384_HASH_LEN 48 -+#define SHA2_512_HASH_LEN 64 -+#define MD5_KPDK_HASH_LEN 16 -+#define SHA1_KPDK_HASH_LEN 20 -+/* Maximum hash algorithm result length */ -+#define HASH_MAX_LEN SHA2_512_HASH_LEN /* Keep this updated */ -+ -+/* HMAC values */ -+#define NULL_HMAC_BLOCK_LEN 1 -+#define MD5_HMAC_BLOCK_LEN 64 -+#define SHA1_HMAC_BLOCK_LEN 64 -+#define RIPEMD160_HMAC_BLOCK_LEN 64 -+#define SHA2_256_HMAC_BLOCK_LEN 64 -+#define SHA2_384_HMAC_BLOCK_LEN 128 -+#define SHA2_512_HMAC_BLOCK_LEN 128 -+/* Maximum HMAC block length */ -+#define HMAC_MAX_BLOCK_LEN SHA2_512_HMAC_BLOCK_LEN /* Keep this updated */ -+#define HMAC_IPAD_VAL 0x36 -+#define HMAC_OPAD_VAL 0x5C -+ -+/* Encryption algorithm block sizes */ -+#define NULL_BLOCK_LEN 1 -+#define DES_BLOCK_LEN 8 -+#define DES3_BLOCK_LEN 8 -+#define BLOWFISH_BLOCK_LEN 8 -+#define SKIPJACK_BLOCK_LEN 8 -+#define CAST128_BLOCK_LEN 8 -+#define RIJNDAEL128_BLOCK_LEN 16 -+#define AES_BLOCK_LEN RIJNDAEL128_BLOCK_LEN -+#define CAMELLIA_BLOCK_LEN 16 -+#define ARC4_BLOCK_LEN 1 -+#define EALG_MAX_BLOCK_LEN AES_BLOCK_LEN /* Keep this updated */ -+ -+/* Encryption algorithm min and max key sizes */ -+#define NULL_MIN_KEY_LEN 0 -+#define NULL_MAX_KEY_LEN 0 -+#define DES_MIN_KEY_LEN 8 -+#define DES_MAX_KEY_LEN 8 -+#define DES3_MIN_KEY_LEN 24 -+#define DES3_MAX_KEY_LEN 24 -+#define BLOWFISH_MIN_KEY_LEN 4 -+#define BLOWFISH_MAX_KEY_LEN 56 -+#define SKIPJACK_MIN_KEY_LEN 10 -+#define SKIPJACK_MAX_KEY_LEN 10 -+#define CAST128_MIN_KEY_LEN 5 -+#define CAST128_MAX_KEY_LEN 16 -+#define RIJNDAEL128_MIN_KEY_LEN 16 -+#define RIJNDAEL128_MAX_KEY_LEN 32 -+#define AES_MIN_KEY_LEN RIJNDAEL128_MIN_KEY_LEN -+#define AES_MAX_KEY_LEN RIJNDAEL128_MAX_KEY_LEN -+#define CAMELLIA_MIN_KEY_LEN 16 -+#define CAMELLIA_MAX_KEY_LEN 32 -+#define ARC4_MIN_KEY_LEN 1 -+#define ARC4_MAX_KEY_LEN 256 -+ -+/* Max size of data that can be processed */ -+#define CRYPTO_MAX_DATA_LEN 64*1024 - 1 -+ -+#define CRYPTO_ALGORITHM_MIN 1 -+#define CRYPTO_DES_CBC 1 -+#define CRYPTO_3DES_CBC 2 -+#define CRYPTO_BLF_CBC 3 -+#define CRYPTO_CAST_CBC 4 -+#define CRYPTO_SKIPJACK_CBC 5 -+#define CRYPTO_MD5_HMAC 6 -+#define CRYPTO_SHA1_HMAC 7 -+#define CRYPTO_RIPEMD160_HMAC 8 -+#define CRYPTO_MD5_KPDK 9 -+#define CRYPTO_SHA1_KPDK 10 -+#define CRYPTO_RIJNDAEL128_CBC 11 /* 128 bit blocksize */ -+#define CRYPTO_AES_CBC 11 /* 128 bit blocksize -- the same as above */ -+#define CRYPTO_ARC4 12 -+#define CRYPTO_MD5 13 -+#define CRYPTO_SHA1 14 -+#define CRYPTO_NULL_HMAC 15 -+#define CRYPTO_NULL_CBC 16 -+#define CRYPTO_DEFLATE_COMP 17 /* Deflate compression algorithm */ -+#define CRYPTO_SHA2_256_HMAC 18 -+#define CRYPTO_SHA2_384_HMAC 19 -+#define CRYPTO_SHA2_512_HMAC 20 -+#define CRYPTO_CAMELLIA_CBC 21 -+#define CRYPTO_SHA2_256 22 -+#define CRYPTO_SHA2_384 23 -+#define CRYPTO_SHA2_512 24 -+#define CRYPTO_RIPEMD160 25 -+#define CRYPTO_ALGORITHM_MAX 25 /* Keep updated - see below */ -+ -+/* Algorithm flags */ -+#define CRYPTO_ALG_FLAG_SUPPORTED 0x01 /* Algorithm is supported */ -+#define CRYPTO_ALG_FLAG_RNG_ENABLE 0x02 /* Has HW RNG for DH/DSA */ -+#define CRYPTO_ALG_FLAG_DSA_SHA 0x04 /* Can do SHA on msg */ -+ -+/* -+ * Crypto driver/device flags. They can set in the crid -+ * parameter when creating a session or submitting a key -+ * op to affect the device/driver assigned. If neither -+ * of these are specified then the crid is assumed to hold -+ * the driver id of an existing (and suitable) device that -+ * must be used to satisfy the request. -+ */ -+#define CRYPTO_FLAG_HARDWARE 0x01000000 /* hardware accelerated */ -+#define CRYPTO_FLAG_SOFTWARE 0x02000000 /* software implementation */ -+ -+/* NB: deprecated */ -+struct session_op { -+ u_int32_t cipher; /* ie. CRYPTO_DES_CBC */ -+ u_int32_t mac; /* ie. CRYPTO_MD5_HMAC */ -+ -+ u_int32_t keylen; /* cipher key */ -+ caddr_t key; -+ int mackeylen; /* mac key */ -+ caddr_t mackey; -+ -+ u_int32_t ses; /* returns: session # */ -+}; -+ -+struct session2_op { -+ u_int32_t cipher; /* ie. CRYPTO_DES_CBC */ -+ u_int32_t mac; /* ie. CRYPTO_MD5_HMAC */ -+ -+ u_int32_t keylen; /* cipher key */ -+ caddr_t key; -+ int mackeylen; /* mac key */ -+ caddr_t mackey; -+ -+ u_int32_t ses; /* returns: session # */ -+ int crid; /* driver id + flags (rw) */ -+ int pad[4]; /* for future expansion */ -+}; -+ -+struct crypt_op { -+ u_int32_t ses; -+ u_int16_t op; /* i.e. COP_ENCRYPT */ -+#define COP_NONE 0 -+#define COP_ENCRYPT 1 -+#define COP_DECRYPT 2 -+ u_int16_t flags; -+#define COP_F_BATCH 0x0008 /* Batch op if possible */ -+ u_int len; -+ caddr_t src, dst; /* become iov[] inside kernel */ -+ caddr_t mac; /* must be big enough for chosen MAC */ -+ caddr_t iv; -+}; -+ -+/* -+ * Parameters for looking up a crypto driver/device by -+ * device name or by id. The latter are returned for -+ * created sessions (crid) and completed key operations. -+ */ -+struct crypt_find_op { -+ int crid; /* driver id + flags */ -+ char name[32]; /* device/driver name */ -+}; -+ -+/* bignum parameter, in packed bytes, ... */ -+struct crparam { -+ caddr_t crp_p; -+ u_int crp_nbits; -+}; -+ -+#define CRK_MAXPARAM 8 -+ -+struct crypt_kop { -+ u_int crk_op; /* ie. CRK_MOD_EXP or other */ -+ u_int crk_status; /* return status */ -+ u_short crk_iparams; /* # of input parameters */ -+ u_short crk_oparams; /* # of output parameters */ -+ u_int crk_crid; /* NB: only used by CIOCKEY2 (rw) */ -+ struct crparam crk_param[CRK_MAXPARAM]; -+}; -+#define CRK_ALGORITM_MIN 0 -+#define CRK_MOD_EXP 0 -+#define CRK_MOD_EXP_CRT 1 -+#define CRK_DSA_SIGN 2 -+#define CRK_DSA_VERIFY 3 -+#define CRK_DH_COMPUTE_KEY 4 -+#define CRK_ALGORITHM_MAX 4 /* Keep updated - see below */ -+ -+#define CRF_MOD_EXP (1 << CRK_MOD_EXP) -+#define CRF_MOD_EXP_CRT (1 << CRK_MOD_EXP_CRT) -+#define CRF_DSA_SIGN (1 << CRK_DSA_SIGN) -+#define CRF_DSA_VERIFY (1 << CRK_DSA_VERIFY) -+#define CRF_DH_COMPUTE_KEY (1 << CRK_DH_COMPUTE_KEY) -+ -+/* -+ * done against open of /dev/crypto, to get a cloned descriptor. -+ * Please use F_SETFD against the cloned descriptor. -+ */ -+#define CRIOGET _IOWR('c', 100, u_int32_t) -+#define CRIOASYMFEAT CIOCASYMFEAT -+#define CRIOFINDDEV CIOCFINDDEV -+ -+/* the following are done against the cloned descriptor */ -+#define CIOCGSESSION _IOWR('c', 101, struct session_op) -+#define CIOCFSESSION _IOW('c', 102, u_int32_t) -+#define CIOCCRYPT _IOWR('c', 103, struct crypt_op) -+#define CIOCKEY _IOWR('c', 104, struct crypt_kop) -+#define CIOCASYMFEAT _IOR('c', 105, u_int32_t) -+#define CIOCGSESSION2 _IOWR('c', 106, struct session2_op) -+#define CIOCKEY2 _IOWR('c', 107, struct crypt_kop) -+#define CIOCFINDDEV _IOWR('c', 108, struct crypt_find_op) -+ -+struct cryptotstat { -+ struct timespec acc; /* total accumulated time */ -+ struct timespec min; /* min time */ -+ struct timespec max; /* max time */ -+ u_int32_t count; /* number of observations */ -+}; -+ -+struct cryptostats { -+ u_int32_t cs_ops; /* symmetric crypto ops submitted */ -+ u_int32_t cs_errs; /* symmetric crypto ops that failed */ -+ u_int32_t cs_kops; /* asymetric/key ops submitted */ -+ u_int32_t cs_kerrs; /* asymetric/key ops that failed */ -+ u_int32_t cs_intrs; /* crypto swi thread activations */ -+ u_int32_t cs_rets; /* crypto return thread activations */ -+ u_int32_t cs_blocks; /* symmetric op driver block */ -+ u_int32_t cs_kblocks; /* symmetric op driver block */ -+ /* -+ * When CRYPTO_TIMING is defined at compile time and the -+ * sysctl debug.crypto is set to 1, the crypto system will -+ * accumulate statistics about how long it takes to process -+ * crypto requests at various points during processing. -+ */ -+ struct cryptotstat cs_invoke; /* crypto_dipsatch -> crypto_invoke */ -+ struct cryptotstat cs_done; /* crypto_invoke -> crypto_done */ -+ struct cryptotstat cs_cb; /* crypto_done -> callback */ -+ struct cryptotstat cs_finis; /* callback -> callback return */ -+ -+ u_int32_t cs_drops; /* crypto ops dropped due to congestion */ -+}; -+ -+#ifdef __KERNEL__ -+ -+/* Standard initialization structure beginning */ -+struct cryptoini { -+ int cri_alg; /* Algorithm to use */ -+ int cri_klen; /* Key length, in bits */ -+ int cri_mlen; /* Number of bytes we want from the -+ entire hash. 0 means all. */ -+ caddr_t cri_key; /* key to use */ -+ u_int8_t cri_iv[EALG_MAX_BLOCK_LEN]; /* IV to use */ -+ struct cryptoini *cri_next; -+}; -+ -+/* Describe boundaries of a single crypto operation */ -+struct cryptodesc { -+ int crd_skip; /* How many bytes to ignore from start */ -+ int crd_len; /* How many bytes to process */ -+ int crd_inject; /* Where to inject results, if applicable */ -+ int crd_flags; -+ -+#define CRD_F_ENCRYPT 0x01 /* Set when doing encryption */ -+#define CRD_F_IV_PRESENT 0x02 /* When encrypting, IV is already in -+ place, so don't copy. */ -+#define CRD_F_IV_EXPLICIT 0x04 /* IV explicitly provided */ -+#define CRD_F_DSA_SHA_NEEDED 0x08 /* Compute SHA-1 of buffer for DSA */ -+#define CRD_F_KEY_EXPLICIT 0x10 /* Key explicitly provided */ -+#define CRD_F_COMP 0x0f /* Set when doing compression */ -+ -+ struct cryptoini CRD_INI; /* Initialization/context data */ -+#define crd_iv CRD_INI.cri_iv -+#define crd_key CRD_INI.cri_key -+#define crd_alg CRD_INI.cri_alg -+#define crd_klen CRD_INI.cri_klen -+ -+ struct cryptodesc *crd_next; -+}; -+ -+/* Structure describing complete operation */ -+struct cryptop { -+ struct list_head crp_next; -+ wait_queue_head_t crp_waitq; -+ -+ u_int64_t crp_sid; /* Session ID */ -+ int crp_ilen; /* Input data total length */ -+ int crp_olen; /* Result total length */ -+ -+ int crp_etype; /* -+ * Error type (zero means no error). -+ * All error codes except EAGAIN -+ * indicate possible data corruption (as in, -+ * the data have been touched). On all -+ * errors, the crp_sid may have changed -+ * (reset to a new one), so the caller -+ * should always check and use the new -+ * value on future requests. -+ */ -+ int crp_flags; -+ -+#define CRYPTO_F_SKBUF 0x0001 /* Input/output are skbuf chains */ -+#define CRYPTO_F_IOV 0x0002 /* Input/output are uio */ -+#define CRYPTO_F_REL 0x0004 /* Must return data in same place */ -+#define CRYPTO_F_BATCH 0x0008 /* Batch op if possible */ -+#define CRYPTO_F_CBIMM 0x0010 /* Do callback immediately */ -+#define CRYPTO_F_DONE 0x0020 /* Operation completed */ -+#define CRYPTO_F_CBIFSYNC 0x0040 /* Do CBIMM if op is synchronous */ -+ -+ caddr_t crp_buf; /* Data to be processed */ -+ caddr_t crp_opaque; /* Opaque pointer, passed along */ -+ struct cryptodesc *crp_desc; /* Linked list of processing descriptors */ -+ -+ int (*crp_callback)(struct cryptop *); /* Callback function */ -+}; -+ -+#define CRYPTO_BUF_CONTIG 0x0 -+#define CRYPTO_BUF_IOV 0x1 -+#define CRYPTO_BUF_SKBUF 0x2 -+ -+#define CRYPTO_OP_DECRYPT 0x0 -+#define CRYPTO_OP_ENCRYPT 0x1 -+ -+/* -+ * Hints passed to process methods. -+ */ -+#define CRYPTO_HINT_MORE 0x1 /* more ops coming shortly */ -+ -+struct cryptkop { -+ struct list_head krp_next; -+ wait_queue_head_t krp_waitq; -+ -+ int krp_flags; -+#define CRYPTO_KF_DONE 0x0001 /* Operation completed */ -+#define CRYPTO_KF_CBIMM 0x0002 /* Do callback immediately */ -+ -+ u_int krp_op; /* ie. CRK_MOD_EXP or other */ -+ u_int krp_status; /* return status */ -+ u_short krp_iparams; /* # of input parameters */ -+ u_short krp_oparams; /* # of output parameters */ -+ u_int krp_crid; /* desired device, etc. */ -+ u_int32_t krp_hid; -+ struct crparam krp_param[CRK_MAXPARAM]; /* kvm */ -+ int (*krp_callback)(struct cryptkop *); -+}; -+ -+#include <ocf-compat.h> -+ -+/* -+ * Session ids are 64 bits. The lower 32 bits contain a "local id" which -+ * is a driver-private session identifier. The upper 32 bits contain a -+ * "hardware id" used by the core crypto code to identify the driver and -+ * a copy of the driver's capabilities that can be used by client code to -+ * optimize operation. -+ */ -+#define CRYPTO_SESID2HID(_sid) (((_sid) >> 32) & 0x00ffffff) -+#define CRYPTO_SESID2CAPS(_sid) (((_sid) >> 32) & 0xff000000) -+#define CRYPTO_SESID2LID(_sid) (((u_int32_t) (_sid)) & 0xffffffff) -+ -+extern int crypto_newsession(u_int64_t *sid, struct cryptoini *cri, int hard); -+extern int crypto_freesession(u_int64_t sid); -+#define CRYPTOCAP_F_HARDWARE CRYPTO_FLAG_HARDWARE -+#define CRYPTOCAP_F_SOFTWARE CRYPTO_FLAG_SOFTWARE -+#define CRYPTOCAP_F_SYNC 0x04000000 /* operates synchronously */ -+extern int32_t crypto_get_driverid(device_t dev, int flags); -+extern int crypto_find_driver(const char *); -+extern device_t crypto_find_device_byhid(int hid); -+extern int crypto_getcaps(int hid); -+extern int crypto_register(u_int32_t driverid, int alg, u_int16_t maxoplen, -+ u_int32_t flags); -+extern int crypto_kregister(u_int32_t, int, u_int32_t); -+extern int crypto_unregister(u_int32_t driverid, int alg); -+extern int crypto_unregister_all(u_int32_t driverid); -+extern int crypto_dispatch(struct cryptop *crp); -+extern int crypto_kdispatch(struct cryptkop *); -+#define CRYPTO_SYMQ 0x1 -+#define CRYPTO_ASYMQ 0x2 -+extern int crypto_unblock(u_int32_t, int); -+extern void crypto_done(struct cryptop *crp); -+extern void crypto_kdone(struct cryptkop *); -+extern int crypto_getfeat(int *); -+ -+extern void crypto_freereq(struct cryptop *crp); -+extern struct cryptop *crypto_getreq(int num); -+ -+extern int crypto_usercrypto; /* userland may do crypto requests */ -+extern int crypto_userasymcrypto; /* userland may do asym crypto reqs */ -+extern int crypto_devallowsoft; /* only use hardware crypto */ -+ -+/* -+ * random number support, crypto_unregister_all will unregister -+ */ -+extern int crypto_rregister(u_int32_t driverid, -+ int (*read_random)(void *arg, u_int32_t *buf, int len), void *arg); -+extern int crypto_runregister_all(u_int32_t driverid); -+ -+/* -+ * Crypto-related utility routines used mainly by drivers. -+ * -+ * XXX these don't really belong here; but for now they're -+ * kept apart from the rest of the system. -+ */ -+struct uio; -+extern void cuio_copydata(struct uio* uio, int off, int len, caddr_t cp); -+extern void cuio_copyback(struct uio* uio, int off, int len, caddr_t cp); -+extern struct iovec *cuio_getptr(struct uio *uio, int loc, int *off); -+ -+extern void crypto_copyback(int flags, caddr_t buf, int off, int size, -+ caddr_t in); -+extern void crypto_copydata(int flags, caddr_t buf, int off, int size, -+ caddr_t out); -+extern int crypto_apply(int flags, caddr_t buf, int off, int len, -+ int (*f)(void *, void *, u_int), void *arg); -+ -+#endif /* __KERNEL__ */ -+#endif /* _CRYPTO_CRYPTO_H_ */ -diff -Nur linux-2.6.30.orig/crypto/ocf/cryptosoft.c linux-2.6.30/crypto/ocf/cryptosoft.c ---- linux-2.6.30.orig/crypto/ocf/cryptosoft.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/cryptosoft.c 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,898 @@ -+/* -+ * An OCF module that uses the linux kernel cryptoapi, based on the -+ * original cryptosoft for BSD by Angelos D. Keromytis (angelos@cis.upenn.edu) -+ * but is mostly unrecognisable, -+ * -+ * Written by David McCullough <david_mccullough@securecomputing.com> -+ * Copyright (C) 2004-2007 David McCullough -+ * Copyright (C) 2004-2005 Intel Corporation. -+ * -+ * LICENSE TERMS -+ * -+ * The free distribution and use of this software in both source and binary -+ * form is allowed (with or without changes) provided that: -+ * -+ * 1. distributions of this source code include the above copyright -+ * notice, this list of conditions and the following disclaimer; -+ * -+ * 2. distributions in binary form include the above copyright -+ * notice, this list of conditions and the following disclaimer -+ * in the documentation and/or other associated materials; -+ * -+ * 3. the copyright holder's name is not used to endorse products -+ * built using this software without specific written permission. -+ * -+ * ALTERNATIVELY, provided that this notice is retained in full, this product -+ * may be distributed under the terms of the GNU General Public License (GPL), -+ * in which case the provisions of the GPL apply INSTEAD OF those given above. -+ * -+ * DISCLAIMER -+ * -+ * This software is provided 'as is' with no explicit or implied warranties -+ * in respect of its properties, including, but not limited to, correctness -+ * and/or fitness for purpose. -+ * --------------------------------------------------------------------------- -+ */ -+ -+#ifndef AUTOCONF_INCLUDED -+#include <linux/config.h> -+#endif -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/list.h> -+#include <linux/slab.h> -+#include <linux/sched.h> -+#include <linux/wait.h> -+#include <linux/crypto.h> -+#include <linux/mm.h> -+#include <linux/skbuff.h> -+#include <linux/random.h> -+#include <linux/scatterlist.h> -+ -+#include <cryptodev.h> -+#include <uio.h> -+ -+struct { -+ softc_device_decl sc_dev; -+} swcr_softc; -+ -+#define offset_in_page(p) ((unsigned long)(p) & ~PAGE_MASK) -+ -+/* Software session entry */ -+ -+#define SW_TYPE_CIPHER 0 -+#define SW_TYPE_HMAC 1 -+#define SW_TYPE_AUTH2 2 -+#define SW_TYPE_HASH 3 -+#define SW_TYPE_COMP 4 -+#define SW_TYPE_BLKCIPHER 5 -+ -+struct swcr_data { -+ int sw_type; -+ int sw_alg; -+ struct crypto_tfm *sw_tfm; -+ union { -+ struct { -+ char *sw_key; -+ int sw_klen; -+ int sw_mlen; -+ } hmac; -+ void *sw_comp_buf; -+ } u; -+ struct swcr_data *sw_next; -+}; -+ -+#ifndef CRYPTO_TFM_MODE_CBC -+/* -+ * As of linux-2.6.21 this is no longer defined, and presumably no longer -+ * needed to be passed into the crypto core code. -+ */ -+#define CRYPTO_TFM_MODE_CBC 0 -+#define CRYPTO_TFM_MODE_ECB 0 -+#endif -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) -+ /* -+ * Linux 2.6.19 introduced a new Crypto API, setup macro's to convert new -+ * API into old API. -+ */ -+ -+ /* Symmetric/Block Cipher */ -+ struct blkcipher_desc -+ { -+ struct crypto_tfm *tfm; -+ void *info; -+ }; -+ #define ecb(X) #X -+ #define cbc(X) #X -+ #define crypto_has_blkcipher(X, Y, Z) crypto_alg_available(X, 0) -+ #define crypto_blkcipher_cast(X) X -+ #define crypto_blkcipher_tfm(X) X -+ #define crypto_alloc_blkcipher(X, Y, Z) crypto_alloc_tfm(X, mode) -+ #define crypto_blkcipher_ivsize(X) crypto_tfm_alg_ivsize(X) -+ #define crypto_blkcipher_blocksize(X) crypto_tfm_alg_blocksize(X) -+ #define crypto_blkcipher_setkey(X, Y, Z) crypto_cipher_setkey(X, Y, Z) -+ #define crypto_blkcipher_encrypt_iv(W, X, Y, Z) \ -+ crypto_cipher_encrypt_iv((W)->tfm, X, Y, Z, (u8 *)((W)->info)) -+ #define crypto_blkcipher_decrypt_iv(W, X, Y, Z) \ -+ crypto_cipher_decrypt_iv((W)->tfm, X, Y, Z, (u8 *)((W)->info)) -+ -+ /* Hash/HMAC/Digest */ -+ struct hash_desc -+ { -+ struct crypto_tfm *tfm; -+ }; -+ #define hmac(X) #X -+ #define crypto_has_hash(X, Y, Z) crypto_alg_available(X, 0) -+ #define crypto_hash_cast(X) X -+ #define crypto_hash_tfm(X) X -+ #define crypto_alloc_hash(X, Y, Z) crypto_alloc_tfm(X, mode) -+ #define crypto_hash_digestsize(X) crypto_tfm_alg_digestsize(X) -+ #define crypto_hash_digest(W, X, Y, Z) \ -+ crypto_digest_digest((W)->tfm, X, sg_num, Z) -+ -+ /* Asymmetric Cipher */ -+ #define crypto_has_cipher(X, Y, Z) crypto_alg_available(X, 0) -+ -+ /* Compression */ -+ #define crypto_has_comp(X, Y, Z) crypto_alg_available(X, 0) -+ #define crypto_comp_tfm(X) X -+ #define crypto_comp_cast(X) X -+ #define crypto_alloc_comp(X, Y, Z) crypto_alloc_tfm(X, mode) -+#else -+ #define ecb(X) "ecb(" #X ")" -+ #define cbc(X) "cbc(" #X ")" -+ #define hmac(X) "hmac(" #X ")" -+#endif /* if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) */ -+ -+struct crypto_details -+{ -+ char *alg_name; -+ int mode; -+ int sw_type; -+}; -+ -+/* -+ * This needs to be kept updated with CRYPTO_xxx list (cryptodev.h). -+ * If the Algorithm is not supported, then insert a {NULL, 0, 0} entry. -+ * -+ * IMPORTANT: The index to the array IS CRYPTO_xxx. -+ */ -+static struct crypto_details crypto_details[CRYPTO_ALGORITHM_MAX + 1] = { -+ { NULL, 0, 0 }, -+ /* CRYPTO_xxx index starts at 1 */ -+ { cbc(des), CRYPTO_TFM_MODE_CBC, SW_TYPE_BLKCIPHER }, -+ { cbc(des3_ede), CRYPTO_TFM_MODE_CBC, SW_TYPE_BLKCIPHER }, -+ { cbc(blowfish), CRYPTO_TFM_MODE_CBC, SW_TYPE_BLKCIPHER }, -+ { cbc(cast5), CRYPTO_TFM_MODE_CBC, SW_TYPE_BLKCIPHER }, -+ { cbc(skipjack), CRYPTO_TFM_MODE_CBC, SW_TYPE_BLKCIPHER }, -+ { hmac(md5), 0, SW_TYPE_HMAC }, -+ { hmac(sha1), 0, SW_TYPE_HMAC }, -+ { hmac(ripemd160), 0, SW_TYPE_HMAC }, -+ { "md5-kpdk??", 0, SW_TYPE_HASH }, -+ { "sha1-kpdk??", 0, SW_TYPE_HASH }, -+ { cbc(aes), CRYPTO_TFM_MODE_CBC, SW_TYPE_BLKCIPHER }, -+ { ecb(arc4), CRYPTO_TFM_MODE_ECB, SW_TYPE_BLKCIPHER }, -+ { "md5", 0, SW_TYPE_HASH }, -+ { "sha1", 0, SW_TYPE_HASH }, -+ { hmac(digest_null), 0, SW_TYPE_HMAC }, -+ { cbc(cipher_null), CRYPTO_TFM_MODE_CBC, SW_TYPE_BLKCIPHER }, -+ { "deflate", 0, SW_TYPE_COMP }, -+ { hmac(sha256), 0, SW_TYPE_HMAC }, -+ { hmac(sha384), 0, SW_TYPE_HMAC }, -+ { hmac(sha512), 0, SW_TYPE_HMAC }, -+ { cbc(camellia), CRYPTO_TFM_MODE_CBC, SW_TYPE_BLKCIPHER }, -+ { "sha256", 0, SW_TYPE_HASH }, -+ { "sha384", 0, SW_TYPE_HASH }, -+ { "sha512", 0, SW_TYPE_HASH }, -+ { "ripemd160", 0, SW_TYPE_HASH }, -+}; -+ -+int32_t swcr_id = -1; -+module_param(swcr_id, int, 0444); -+MODULE_PARM_DESC(swcr_id, "Read-Only OCF ID for cryptosoft driver"); -+ -+int swcr_fail_if_compression_grows = 1; -+module_param(swcr_fail_if_compression_grows, int, 0644); -+MODULE_PARM_DESC(swcr_fail_if_compression_grows, -+ "Treat compression that results in more data as a failure"); -+ -+static struct swcr_data **swcr_sessions = NULL; -+static u_int32_t swcr_sesnum = 0; -+ -+static int swcr_process(device_t, struct cryptop *, int); -+static int swcr_newsession(device_t, u_int32_t *, struct cryptoini *); -+static int swcr_freesession(device_t, u_int64_t); -+ -+static device_method_t swcr_methods = { -+ /* crypto device methods */ -+ DEVMETHOD(cryptodev_newsession, swcr_newsession), -+ DEVMETHOD(cryptodev_freesession,swcr_freesession), -+ DEVMETHOD(cryptodev_process, swcr_process), -+}; -+ -+#define debug swcr_debug -+int swcr_debug = 0; -+module_param(swcr_debug, int, 0644); -+MODULE_PARM_DESC(swcr_debug, "Enable debug"); -+ -+/* -+ * Generate a new software session. -+ */ -+static int -+swcr_newsession(device_t dev, u_int32_t *sid, struct cryptoini *cri) -+{ -+ struct swcr_data **swd; -+ u_int32_t i; -+ int error; -+ char *algo; -+ int mode, sw_type; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ if (sid == NULL || cri == NULL) { -+ dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__); -+ return EINVAL; -+ } -+ -+ if (swcr_sessions) { -+ for (i = 1; i < swcr_sesnum; i++) -+ if (swcr_sessions[i] == NULL) -+ break; -+ } else -+ i = 1; /* NB: to silence compiler warning */ -+ -+ if (swcr_sessions == NULL || i == swcr_sesnum) { -+ if (swcr_sessions == NULL) { -+ i = 1; /* We leave swcr_sessions[0] empty */ -+ swcr_sesnum = CRYPTO_SW_SESSIONS; -+ } else -+ swcr_sesnum *= 2; -+ -+ swd = kmalloc(swcr_sesnum * sizeof(struct swcr_data *), SLAB_ATOMIC); -+ if (swd == NULL) { -+ /* Reset session number */ -+ if (swcr_sesnum == CRYPTO_SW_SESSIONS) -+ swcr_sesnum = 0; -+ else -+ swcr_sesnum /= 2; -+ dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); -+ return ENOBUFS; -+ } -+ memset(swd, 0, swcr_sesnum * sizeof(struct swcr_data *)); -+ -+ /* Copy existing sessions */ -+ if (swcr_sessions) { -+ memcpy(swd, swcr_sessions, -+ (swcr_sesnum / 2) * sizeof(struct swcr_data *)); -+ kfree(swcr_sessions); -+ } -+ -+ swcr_sessions = swd; -+ } -+ -+ swd = &swcr_sessions[i]; -+ *sid = i; -+ -+ while (cri) { -+ *swd = (struct swcr_data *) kmalloc(sizeof(struct swcr_data), -+ SLAB_ATOMIC); -+ if (*swd == NULL) { -+ swcr_freesession(NULL, i); -+ dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); -+ return ENOBUFS; -+ } -+ memset(*swd, 0, sizeof(struct swcr_data)); -+ -+ if (cri->cri_alg > CRYPTO_ALGORITHM_MAX) { -+ printk("cryptosoft: Unknown algorithm 0x%x\n", cri->cri_alg); -+ swcr_freesession(NULL, i); -+ return EINVAL; -+ } -+ -+ algo = crypto_details[cri->cri_alg].alg_name; -+ if (!algo || !*algo) { -+ printk("cryptosoft: Unsupported algorithm 0x%x\n", cri->cri_alg); -+ swcr_freesession(NULL, i); -+ return EINVAL; -+ } -+ -+ mode = crypto_details[cri->cri_alg].mode; -+ sw_type = crypto_details[cri->cri_alg].sw_type; -+ -+ /* Algorithm specific configuration */ -+ switch (cri->cri_alg) { -+ case CRYPTO_NULL_CBC: -+ cri->cri_klen = 0; /* make it work with crypto API */ -+ break; -+ default: -+ break; -+ } -+ -+ if (sw_type == SW_TYPE_BLKCIPHER) { -+ dprintk("%s crypto_alloc_blkcipher(%s, 0x%x)\n", __FUNCTION__, -+ algo, mode); -+ -+ (*swd)->sw_tfm = crypto_blkcipher_tfm( -+ crypto_alloc_blkcipher(algo, 0, -+ CRYPTO_ALG_ASYNC)); -+ if (!(*swd)->sw_tfm) { -+ dprintk("cryptosoft: crypto_alloc_blkcipher failed(%s,0x%x)\n", -+ algo,mode); -+ swcr_freesession(NULL, i); -+ return EINVAL; -+ } -+ -+ if (debug) { -+ dprintk("%s key:cri->cri_klen=%d,(cri->cri_klen + 7)/8=%d", -+ __FUNCTION__,cri->cri_klen,(cri->cri_klen + 7)/8); -+ for (i = 0; i < (cri->cri_klen + 7) / 8; i++) -+ { -+ dprintk("%s0x%x", (i % 8) ? " " : "\n ",cri->cri_key[i]); -+ } -+ dprintk("\n"); -+ } -+ error = crypto_blkcipher_setkey( -+ crypto_blkcipher_cast((*swd)->sw_tfm), cri->cri_key, -+ (cri->cri_klen + 7) / 8); -+ if (error) { -+ printk("cryptosoft: setkey failed %d (crt_flags=0x%x)\n", error, -+ (*swd)->sw_tfm->crt_flags); -+ swcr_freesession(NULL, i); -+ return error; -+ } -+ } else if (sw_type == SW_TYPE_HMAC || sw_type == SW_TYPE_HASH) { -+ dprintk("%s crypto_alloc_hash(%s, 0x%x)\n", __FUNCTION__, -+ algo, mode); -+ -+ (*swd)->sw_tfm = crypto_hash_tfm( -+ crypto_alloc_hash(algo, 0, CRYPTO_ALG_ASYNC)); -+ -+ if (!(*swd)->sw_tfm) { -+ dprintk("cryptosoft: crypto_alloc_hash failed(%s,0x%x)\n", -+ algo, mode); -+ swcr_freesession(NULL, i); -+ return EINVAL; -+ } -+ -+ (*swd)->u.hmac.sw_klen = (cri->cri_klen + 7) / 8; -+ (*swd)->u.hmac.sw_key = (char *)kmalloc((*swd)->u.hmac.sw_klen, -+ SLAB_ATOMIC); -+ if ((*swd)->u.hmac.sw_key == NULL) { -+ swcr_freesession(NULL, i); -+ dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); -+ return ENOBUFS; -+ } -+ memcpy((*swd)->u.hmac.sw_key, cri->cri_key, (*swd)->u.hmac.sw_klen); -+ if (cri->cri_mlen) { -+ (*swd)->u.hmac.sw_mlen = cri->cri_mlen; -+ } else { -+ (*swd)->u.hmac.sw_mlen = -+ crypto_hash_digestsize( -+ crypto_hash_cast((*swd)->sw_tfm)); -+ } -+ } else if (sw_type == SW_TYPE_COMP) { -+ (*swd)->sw_tfm = crypto_comp_tfm( -+ crypto_alloc_comp(algo, 0, CRYPTO_ALG_ASYNC)); -+ if (!(*swd)->sw_tfm) { -+ dprintk("cryptosoft: crypto_alloc_comp failed(%s,0x%x)\n", -+ algo, mode); -+ swcr_freesession(NULL, i); -+ return EINVAL; -+ } -+ (*swd)->u.sw_comp_buf = kmalloc(CRYPTO_MAX_DATA_LEN, SLAB_ATOMIC); -+ if ((*swd)->u.sw_comp_buf == NULL) { -+ swcr_freesession(NULL, i); -+ dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); -+ return ENOBUFS; -+ } -+ } else { -+ printk("cryptosoft: Unhandled sw_type %d\n", sw_type); -+ swcr_freesession(NULL, i); -+ return EINVAL; -+ } -+ -+ (*swd)->sw_alg = cri->cri_alg; -+ (*swd)->sw_type = sw_type; -+ -+ cri = cri->cri_next; -+ swd = &((*swd)->sw_next); -+ } -+ return 0; -+} -+ -+/* -+ * Free a session. -+ */ -+static int -+swcr_freesession(device_t dev, u_int64_t tid) -+{ -+ struct swcr_data *swd; -+ u_int32_t sid = CRYPTO_SESID2LID(tid); -+ -+ dprintk("%s()\n", __FUNCTION__); -+ if (sid > swcr_sesnum || swcr_sessions == NULL || -+ swcr_sessions[sid] == NULL) { -+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); -+ return(EINVAL); -+ } -+ -+ /* Silently accept and return */ -+ if (sid == 0) -+ return(0); -+ -+ while ((swd = swcr_sessions[sid]) != NULL) { -+ swcr_sessions[sid] = swd->sw_next; -+ if (swd->sw_tfm) -+ crypto_free_tfm(swd->sw_tfm); -+ if (swd->sw_type == SW_TYPE_COMP) { -+ if (swd->u.sw_comp_buf) -+ kfree(swd->u.sw_comp_buf); -+ } else { -+ if (swd->u.hmac.sw_key) -+ kfree(swd->u.hmac.sw_key); -+ } -+ kfree(swd); -+ } -+ return 0; -+} -+ -+/* -+ * Process a software request. -+ */ -+static int -+swcr_process(device_t dev, struct cryptop *crp, int hint) -+{ -+ struct cryptodesc *crd; -+ struct swcr_data *sw; -+ u_int32_t lid; -+#define SCATTERLIST_MAX 16 -+ struct scatterlist sg[SCATTERLIST_MAX]; -+ int sg_num, sg_len, skip; -+ struct sk_buff *skb = NULL; -+ struct uio *uiop = NULL; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ /* Sanity check */ -+ if (crp == NULL) { -+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); -+ return EINVAL; -+ } -+ -+ crp->crp_etype = 0; -+ -+ if (crp->crp_desc == NULL || crp->crp_buf == NULL) { -+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); -+ crp->crp_etype = EINVAL; -+ goto done; -+ } -+ -+ lid = crp->crp_sid & 0xffffffff; -+ if (lid >= swcr_sesnum || lid == 0 || swcr_sessions == NULL || -+ swcr_sessions[lid] == NULL) { -+ crp->crp_etype = ENOENT; -+ dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__); -+ goto done; -+ } -+ -+ /* -+ * do some error checking outside of the loop for SKB and IOV processing -+ * this leaves us with valid skb or uiop pointers for later -+ */ -+ if (crp->crp_flags & CRYPTO_F_SKBUF) { -+ skb = (struct sk_buff *) crp->crp_buf; -+ if (skb_shinfo(skb)->nr_frags >= SCATTERLIST_MAX) { -+ printk("%s,%d: %d nr_frags > SCATTERLIST_MAX", __FILE__, __LINE__, -+ skb_shinfo(skb)->nr_frags); -+ goto done; -+ } -+ } else if (crp->crp_flags & CRYPTO_F_IOV) { -+ uiop = (struct uio *) crp->crp_buf; -+ if (uiop->uio_iovcnt > SCATTERLIST_MAX) { -+ printk("%s,%d: %d uio_iovcnt > SCATTERLIST_MAX", __FILE__, __LINE__, -+ uiop->uio_iovcnt); -+ goto done; -+ } -+ } -+ -+ /* Go through crypto descriptors, processing as we go */ -+ for (crd = crp->crp_desc; crd; crd = crd->crd_next) { -+ /* -+ * Find the crypto context. -+ * -+ * XXX Note that the logic here prevents us from having -+ * XXX the same algorithm multiple times in a session -+ * XXX (or rather, we can but it won't give us the right -+ * XXX results). To do that, we'd need some way of differentiating -+ * XXX between the various instances of an algorithm (so we can -+ * XXX locate the correct crypto context). -+ */ -+ for (sw = swcr_sessions[lid]; sw && sw->sw_alg != crd->crd_alg; -+ sw = sw->sw_next) -+ ; -+ -+ /* No such context ? */ -+ if (sw == NULL) { -+ crp->crp_etype = EINVAL; -+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); -+ goto done; -+ } -+ -+ skip = crd->crd_skip; -+ -+ /* -+ * setup the SG list skip from the start of the buffer -+ */ -+ memset(sg, 0, sizeof(sg)); -+ if (crp->crp_flags & CRYPTO_F_SKBUF) { -+ int i, len; -+ -+ sg_num = 0; -+ sg_len = 0; -+ -+ if (skip < skb_headlen(skb)) { -+ len = skb_headlen(skb) - skip; -+ if (len + sg_len > crd->crd_len) -+ len = crd->crd_len - sg_len; -+ sg_set_page(&sg[sg_num], -+ virt_to_page(skb->data + skip), len, -+ offset_in_page(skb->data + skip)); -+ sg_len += len; -+ sg_num++; -+ skip = 0; -+ } else -+ skip -= skb_headlen(skb); -+ -+ for (i = 0; sg_len < crd->crd_len && -+ i < skb_shinfo(skb)->nr_frags && -+ sg_num < SCATTERLIST_MAX; i++) { -+ if (skip < skb_shinfo(skb)->frags[i].size) { -+ len = skb_shinfo(skb)->frags[i].size - skip; -+ if (len + sg_len > crd->crd_len) -+ len = crd->crd_len - sg_len; -+ sg_set_page(&sg[sg_num], -+ skb_shinfo(skb)->frags[i].page, -+ len, -+ skb_shinfo(skb)->frags[i].page_offset + skip); -+ sg_len += len; -+ sg_num++; -+ skip = 0; -+ } else -+ skip -= skb_shinfo(skb)->frags[i].size; -+ } -+ } else if (crp->crp_flags & CRYPTO_F_IOV) { -+ int len; -+ -+ sg_len = 0; -+ for (sg_num = 0; sg_len <= crd->crd_len && -+ sg_num < uiop->uio_iovcnt && -+ sg_num < SCATTERLIST_MAX; sg_num++) { -+ if (skip <= uiop->uio_iov[sg_num].iov_len) { -+ len = uiop->uio_iov[sg_num].iov_len - skip; -+ if (len + sg_len > crd->crd_len) -+ len = crd->crd_len - sg_len; -+ sg_set_page(&sg[sg_num], -+ virt_to_page(uiop->uio_iov[sg_num].iov_base+skip), -+ len, -+ offset_in_page(uiop->uio_iov[sg_num].iov_base+skip)); -+ sg_len += len; -+ skip = 0; -+ } else -+ skip -= uiop->uio_iov[sg_num].iov_len; -+ } -+ } else { -+ sg_len = (crp->crp_ilen - skip); -+ if (sg_len > crd->crd_len) -+ sg_len = crd->crd_len; -+ sg_set_page(&sg[0], virt_to_page(crp->crp_buf + skip), -+ sg_len, offset_in_page(crp->crp_buf + skip)); -+ sg_num = 1; -+ } -+ -+ -+ switch (sw->sw_type) { -+ case SW_TYPE_BLKCIPHER: { -+ unsigned char iv[EALG_MAX_BLOCK_LEN]; -+ unsigned char *ivp = iv; -+ int ivsize = -+ crypto_blkcipher_ivsize(crypto_blkcipher_cast(sw->sw_tfm)); -+ struct blkcipher_desc desc; -+ -+ if (sg_len < crypto_blkcipher_blocksize( -+ crypto_blkcipher_cast(sw->sw_tfm))) { -+ crp->crp_etype = EINVAL; -+ dprintk("%s,%d: EINVAL len %d < %d\n", __FILE__, __LINE__, -+ sg_len, crypto_blkcipher_blocksize( -+ crypto_blkcipher_cast(sw->sw_tfm))); -+ goto done; -+ } -+ -+ if (ivsize > sizeof(iv)) { -+ crp->crp_etype = EINVAL; -+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); -+ goto done; -+ } -+ -+ if (crd->crd_flags & CRD_F_KEY_EXPLICIT) { -+ int i, error; -+ -+ if (debug) { -+ dprintk("%s key:", __FUNCTION__); -+ for (i = 0; i < (crd->crd_klen + 7) / 8; i++) -+ dprintk("%s0x%x", (i % 8) ? " " : "\n ", -+ crd->crd_key[i]); -+ dprintk("\n"); -+ } -+ error = crypto_blkcipher_setkey( -+ crypto_blkcipher_cast(sw->sw_tfm), crd->crd_key, -+ (crd->crd_klen + 7) / 8); -+ if (error) { -+ dprintk("cryptosoft: setkey failed %d (crt_flags=0x%x)\n", -+ error, sw->sw_tfm->crt_flags); -+ crp->crp_etype = -error; -+ } -+ } -+ -+ memset(&desc, 0, sizeof(desc)); -+ desc.tfm = crypto_blkcipher_cast(sw->sw_tfm); -+ -+ if (crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */ -+ -+ if (crd->crd_flags & CRD_F_IV_EXPLICIT) { -+ ivp = crd->crd_iv; -+ } else { -+ get_random_bytes(ivp, ivsize); -+ } -+ /* -+ * do we have to copy the IV back to the buffer ? -+ */ -+ if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) { -+ crypto_copyback(crp->crp_flags, crp->crp_buf, -+ crd->crd_inject, ivsize, (caddr_t)ivp); -+ } -+ desc.info = ivp; -+ crypto_blkcipher_encrypt_iv(&desc, sg, sg, sg_len); -+ -+ } else { /*decrypt */ -+ -+ if (crd->crd_flags & CRD_F_IV_EXPLICIT) { -+ ivp = crd->crd_iv; -+ } else { -+ crypto_copydata(crp->crp_flags, crp->crp_buf, -+ crd->crd_inject, ivsize, (caddr_t)ivp); -+ } -+ desc.info = ivp; -+ crypto_blkcipher_decrypt_iv(&desc, sg, sg, sg_len); -+ } -+ } break; -+ case SW_TYPE_HMAC: -+ case SW_TYPE_HASH: -+ { -+ char result[HASH_MAX_LEN]; -+ struct hash_desc desc; -+ -+ /* check we have room for the result */ -+ if (crp->crp_ilen - crd->crd_inject < sw->u.hmac.sw_mlen) { -+ dprintk( -+ "cryptosoft: EINVAL crp_ilen=%d, len=%d, inject=%d digestsize=%d\n", -+ crp->crp_ilen, crd->crd_skip + sg_len, crd->crd_inject, -+ sw->u.hmac.sw_mlen); -+ crp->crp_etype = EINVAL; -+ goto done; -+ } -+ -+ memset(&desc, 0, sizeof(desc)); -+ desc.tfm = crypto_hash_cast(sw->sw_tfm); -+ -+ memset(result, 0, sizeof(result)); -+ -+ if (sw->sw_type == SW_TYPE_HMAC) { -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) -+ crypto_hmac(sw->sw_tfm, sw->u.hmac.sw_key, &sw->u.hmac.sw_klen, -+ sg, sg_num, result); -+#else -+ crypto_hash_setkey(desc.tfm, sw->u.hmac.sw_key, -+ sw->u.hmac.sw_klen); -+ crypto_hash_digest(&desc, sg, sg_len, result); -+#endif /* #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) */ -+ -+ } else { /* SW_TYPE_HASH */ -+ crypto_hash_digest(&desc, sg, sg_len, result); -+ } -+ -+ crypto_copyback(crp->crp_flags, crp->crp_buf, -+ crd->crd_inject, sw->u.hmac.sw_mlen, result); -+ } -+ break; -+ -+ case SW_TYPE_COMP: { -+ void *ibuf = NULL; -+ void *obuf = sw->u.sw_comp_buf; -+ int ilen = sg_len, olen = CRYPTO_MAX_DATA_LEN; -+ int ret = 0; -+ -+ /* -+ * we need to use an additional copy if there is more than one -+ * input chunk since the kernel comp routines do not handle -+ * SG yet. Otherwise we just use the input buffer as is. -+ * Rather than allocate another buffer we just split the tmp -+ * buffer we already have. -+ * Perhaps we should just use zlib directly ? -+ */ -+ if (sg_num > 1) { -+ int blk; -+ -+ ibuf = obuf; -+ for (blk = 0; blk < sg_num; blk++) { -+ memcpy(obuf, sg_virt(&sg[blk]), -+ sg[blk].length); -+ obuf += sg[blk].length; -+ } -+ olen -= sg_len; -+ } else -+ ibuf = sg_virt(&sg[0]); -+ -+ if (crd->crd_flags & CRD_F_ENCRYPT) { /* compress */ -+ ret = crypto_comp_compress(crypto_comp_cast(sw->sw_tfm), -+ ibuf, ilen, obuf, &olen); -+ if (!ret && olen > crd->crd_len) { -+ dprintk("cryptosoft: ERANGE compress %d into %d\n", -+ crd->crd_len, olen); -+ if (swcr_fail_if_compression_grows) -+ ret = ERANGE; -+ } -+ } else { /* decompress */ -+ ret = crypto_comp_decompress(crypto_comp_cast(sw->sw_tfm), -+ ibuf, ilen, obuf, &olen); -+ if (!ret && (olen + crd->crd_inject) > crp->crp_olen) { -+ dprintk("cryptosoft: ETOOSMALL decompress %d into %d, " -+ "space for %d,at offset %d\n", -+ crd->crd_len, olen, crp->crp_olen, crd->crd_inject); -+ ret = ETOOSMALL; -+ } -+ } -+ if (ret) -+ dprintk("%s,%d: ret = %d\n", __FILE__, __LINE__, ret); -+ -+ /* -+ * on success copy result back, -+ * linux crpyto API returns -errno, we need to fix that -+ */ -+ crp->crp_etype = ret < 0 ? -ret : ret; -+ if (ret == 0) { -+ /* copy back the result and return it's size */ -+ crypto_copyback(crp->crp_flags, crp->crp_buf, -+ crd->crd_inject, olen, obuf); -+ crp->crp_olen = olen; -+ } -+ -+ -+ } break; -+ -+ default: -+ /* Unknown/unsupported algorithm */ -+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); -+ crp->crp_etype = EINVAL; -+ goto done; -+ } -+ } -+ -+done: -+ crypto_done(crp); -+ return 0; -+} -+ -+static int -+cryptosoft_init(void) -+{ -+ int i, sw_type, mode; -+ char *algo; -+ -+ dprintk("%s(%p)\n", __FUNCTION__, cryptosoft_init); -+ -+ softc_device_init(&swcr_softc, "cryptosoft", 0, swcr_methods); -+ -+ swcr_id = crypto_get_driverid(softc_get_device(&swcr_softc), -+ CRYPTOCAP_F_SOFTWARE | CRYPTOCAP_F_SYNC); -+ if (swcr_id < 0) { -+ printk("Software crypto device cannot initialize!"); -+ return -ENODEV; -+ } -+ -+#define REGISTER(alg) \ -+ crypto_register(swcr_id, alg, 0,0); -+ -+ for (i = CRYPTO_ALGORITHM_MIN; i <= CRYPTO_ALGORITHM_MAX; ++i) -+ { -+ -+ algo = crypto_details[i].alg_name; -+ if (!algo || !*algo) -+ { -+ dprintk("%s:Algorithm %d not supported\n", __FUNCTION__, i); -+ continue; -+ } -+ -+ mode = crypto_details[i].mode; -+ sw_type = crypto_details[i].sw_type; -+ -+ switch (sw_type) -+ { -+ case SW_TYPE_CIPHER: -+ if (crypto_has_cipher(algo, 0, CRYPTO_ALG_ASYNC)) -+ { -+ REGISTER(i); -+ } -+ else -+ { -+ dprintk("%s:CIPHER algorithm %d:'%s' not supported\n", -+ __FUNCTION__, i, algo); -+ } -+ break; -+ case SW_TYPE_HMAC: -+ if (crypto_has_hash(algo, 0, CRYPTO_ALG_ASYNC)) -+ { -+ REGISTER(i); -+ } -+ else -+ { -+ dprintk("%s:HMAC algorithm %d:'%s' not supported\n", -+ __FUNCTION__, i, algo); -+ } -+ break; -+ case SW_TYPE_HASH: -+ if (crypto_has_hash(algo, 0, CRYPTO_ALG_ASYNC)) -+ { -+ REGISTER(i); -+ } -+ else -+ { -+ dprintk("%s:HASH algorithm %d:'%s' not supported\n", -+ __FUNCTION__, i, algo); -+ } -+ break; -+ case SW_TYPE_COMP: -+ if (crypto_has_comp(algo, 0, CRYPTO_ALG_ASYNC)) -+ { -+ REGISTER(i); -+ } -+ else -+ { -+ dprintk("%s:COMP algorithm %d:'%s' not supported\n", -+ __FUNCTION__, i, algo); -+ } -+ break; -+ case SW_TYPE_BLKCIPHER: -+ if (crypto_has_blkcipher(algo, 0, CRYPTO_ALG_ASYNC)) -+ { -+ REGISTER(i); -+ } -+ else -+ { -+ dprintk("%s:BLKCIPHER algorithm %d:'%s' not supported\n", -+ __FUNCTION__, i, algo); -+ } -+ break; -+ default: -+ dprintk( -+ "%s:Algorithm Type %d not supported (algorithm %d:'%s')\n", -+ __FUNCTION__, sw_type, i, algo); -+ break; -+ } -+ } -+ -+ return(0); -+} -+ -+static void -+cryptosoft_exit(void) -+{ -+ dprintk("%s()\n", __FUNCTION__); -+ crypto_unregister_all(swcr_id); -+ swcr_id = -1; -+} -+ -+module_init(cryptosoft_init); -+module_exit(cryptosoft_exit); -+ -+MODULE_LICENSE("Dual BSD/GPL"); -+MODULE_AUTHOR("David McCullough <david_mccullough@securecomputing.com>"); -+MODULE_DESCRIPTION("Cryptosoft (OCF module for kernel crypto)"); -diff -Nur linux-2.6.30.orig/crypto/ocf/ep80579/icp_asym.c linux-2.6.30/crypto/ocf/ep80579/icp_asym.c ---- linux-2.6.30.orig/crypto/ocf/ep80579/icp_asym.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/ep80579/icp_asym.c 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,1375 @@ -+/*************************************************************************** -+ * -+ * This file is provided under a dual BSD/GPLv2 license. When using or -+ * redistributing this file, you may do so under either license. -+ * -+ * GPL LICENSE SUMMARY -+ * -+ * Copyright(c) 2007,2008 Intel Corporation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of version 2 of the GNU General Public License as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. -+ * The full GNU General Public License is included in this distribution -+ * in the file called LICENSE.GPL. -+ * -+ * Contact Information: -+ * Intel Corporation -+ * -+ * BSD LICENSE -+ * -+ * Copyright(c) 2007,2008 Intel Corporation. All rights reserved. -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * -+ * * Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * * Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in -+ * the documentation and/or other materials provided with the -+ * distribution. -+ * * Neither the name of Intel Corporation nor the names of its -+ * contributors may be used to endorse or promote products derived -+ * from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * -+ * version: Security.L.1.0.130 -+ * -+ ***************************************************************************/ -+ -+#include "icp_ocf.h" -+ -+/*The following define values (containing the word 'INDEX') are used to find -+the index of each input buffer of the crypto_kop struct (see OCF cryptodev.h). -+These values were found through analysis of the OCF OpenSSL patch. If the -+calling program uses different input buffer positions, these defines will have -+to be changed.*/ -+ -+/*DIFFIE HELLMAN buffer index values*/ -+#define ICP_DH_KRP_PARAM_PRIME_INDEX (0) -+#define ICP_DH_KRP_PARAM_BASE_INDEX (1) -+#define ICP_DH_KRP_PARAM_PRIVATE_VALUE_INDEX (2) -+#define ICP_DH_KRP_PARAM_RESULT_INDEX (3) -+ -+/*MOD EXP buffer index values*/ -+#define ICP_MOD_EXP_KRP_PARAM_BASE_INDEX (0) -+#define ICP_MOD_EXP_KRP_PARAM_EXPONENT_INDEX (1) -+#define ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX (2) -+#define ICP_MOD_EXP_KRP_PARAM_RESULT_INDEX (3) -+ -+#define SINGLE_BYTE_VALUE (4) -+ -+/*MOD EXP CRT buffer index values*/ -+#define ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_P_INDEX (0) -+#define ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_Q_INDEX (1) -+#define ICP_MOD_EXP_CRT_KRP_PARAM_I_INDEX (2) -+#define ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DP_INDEX (3) -+#define ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DQ_INDEX (4) -+#define ICP_MOD_EXP_CRT_KRP_PARAM_COEFF_QINV_INDEX (5) -+#define ICP_MOD_EXP_CRT_KRP_PARAM_RESULT_INDEX (6) -+ -+/*DSA sign buffer index values*/ -+#define ICP_DSA_SIGN_KRP_PARAM_DGST_INDEX (0) -+#define ICP_DSA_SIGN_KRP_PARAM_PRIME_P_INDEX (1) -+#define ICP_DSA_SIGN_KRP_PARAM_PRIME_Q_INDEX (2) -+#define ICP_DSA_SIGN_KRP_PARAM_G_INDEX (3) -+#define ICP_DSA_SIGN_KRP_PARAM_X_INDEX (4) -+#define ICP_DSA_SIGN_KRP_PARAM_R_RESULT_INDEX (5) -+#define ICP_DSA_SIGN_KRP_PARAM_S_RESULT_INDEX (6) -+ -+/*DSA verify buffer index values*/ -+#define ICP_DSA_VERIFY_KRP_PARAM_DGST_INDEX (0) -+#define ICP_DSA_VERIFY_KRP_PARAM_PRIME_P_INDEX (1) -+#define ICP_DSA_VERIFY_KRP_PARAM_PRIME_Q_INDEX (2) -+#define ICP_DSA_VERIFY_KRP_PARAM_G_INDEX (3) -+#define ICP_DSA_VERIFY_KRP_PARAM_PUBKEY_INDEX (4) -+#define ICP_DSA_VERIFY_KRP_PARAM_SIG_R_INDEX (5) -+#define ICP_DSA_VERIFY_KRP_PARAM_SIG_S_INDEX (6) -+ -+/*DSA sign prime Q vs random number K size check values*/ -+#define DONT_RUN_LESS_THAN_CHECK (0) -+#define FAIL_A_IS_GREATER_THAN_B (1) -+#define FAIL_A_IS_EQUAL_TO_B (1) -+#define SUCCESS_A_IS_LESS_THAN_B (0) -+#define DSA_SIGN_RAND_GEN_VAL_CHECK_MAX_ITERATIONS (500) -+ -+/* We need to set a cryptokp success value just in case it is set or allocated -+ and not set to zero outside of this module */ -+#define CRYPTO_OP_SUCCESS (0) -+ -+static int icp_ocfDrvDHComputeKey(struct cryptkop *krp); -+ -+static int icp_ocfDrvModExp(struct cryptkop *krp); -+ -+static int icp_ocfDrvModExpCRT(struct cryptkop *krp); -+ -+static int -+icp_ocfDrvCheckALessThanB(CpaFlatBuffer * pK, CpaFlatBuffer * pQ, int *doCheck); -+ -+static int icp_ocfDrvDsaSign(struct cryptkop *krp); -+ -+static int icp_ocfDrvDsaVerify(struct cryptkop *krp); -+ -+static void -+icp_ocfDrvDhP1CallBack(void *callbackTag, -+ CpaStatus status, -+ void *pOpData, CpaFlatBuffer * pLocalOctetStringPV); -+ -+static void -+icp_ocfDrvModExpCallBack(void *callbackTag, -+ CpaStatus status, -+ void *pOpData, CpaFlatBuffer * pResult); -+ -+static void -+icp_ocfDrvModExpCRTCallBack(void *callbackTag, -+ CpaStatus status, -+ void *pOpData, CpaFlatBuffer * pOutputData); -+ -+static void -+icp_ocfDrvDsaVerifyCallBack(void *callbackTag, -+ CpaStatus status, -+ void *pOpData, CpaBoolean verifyStatus); -+ -+static void -+icp_ocfDrvDsaRSSignCallBack(void *callbackTag, -+ CpaStatus status, -+ void *pOpData, -+ CpaBoolean protocolStatus, -+ CpaFlatBuffer * pR, CpaFlatBuffer * pS); -+ -+/* Name : icp_ocfDrvPkeProcess -+ * -+ * Description : This function will choose which PKE process to follow -+ * based on the input arguments -+ */ -+int icp_ocfDrvPkeProcess(device_t dev, struct cryptkop *krp, int hint) -+{ -+ CpaStatus lacStatus = CPA_STATUS_SUCCESS; -+ -+ if (NULL == krp) { -+ DPRINTK("%s(): Invalid input parameters, cryptkop = %p\n", -+ __FUNCTION__, krp); -+ return EINVAL; -+ } -+ -+ if (CPA_TRUE == atomic_read(&icp_ocfDrvIsExiting)) { -+ krp->krp_status = ECANCELED; -+ return ECANCELED; -+ } -+ -+ switch (krp->krp_op) { -+ case CRK_DH_COMPUTE_KEY: -+ DPRINTK("%s() doing DH_COMPUTE_KEY\n", __FUNCTION__); -+ lacStatus = icp_ocfDrvDHComputeKey(krp); -+ if (CPA_STATUS_SUCCESS != lacStatus) { -+ EPRINTK("%s(): icp_ocfDrvDHComputeKey failed " -+ "(%d).\n", __FUNCTION__, lacStatus); -+ krp->krp_status = ECANCELED; -+ return ECANCELED; -+ } -+ -+ break; -+ -+ case CRK_MOD_EXP: -+ DPRINTK("%s() doing MOD_EXP \n", __FUNCTION__); -+ lacStatus = icp_ocfDrvModExp(krp); -+ if (CPA_STATUS_SUCCESS != lacStatus) { -+ EPRINTK("%s(): icp_ocfDrvModExp failed (%d).\n", -+ __FUNCTION__, lacStatus); -+ krp->krp_status = ECANCELED; -+ return ECANCELED; -+ } -+ -+ break; -+ -+ case CRK_MOD_EXP_CRT: -+ DPRINTK("%s() doing MOD_EXP_CRT \n", __FUNCTION__); -+ lacStatus = icp_ocfDrvModExpCRT(krp); -+ if (CPA_STATUS_SUCCESS != lacStatus) { -+ EPRINTK("%s(): icp_ocfDrvModExpCRT " -+ "failed (%d).\n", __FUNCTION__, lacStatus); -+ krp->krp_status = ECANCELED; -+ return ECANCELED; -+ } -+ -+ break; -+ -+ case CRK_DSA_SIGN: -+ DPRINTK("%s() doing DSA_SIGN \n", __FUNCTION__); -+ lacStatus = icp_ocfDrvDsaSign(krp); -+ if (CPA_STATUS_SUCCESS != lacStatus) { -+ EPRINTK("%s(): icp_ocfDrvDsaSign " -+ "failed (%d).\n", __FUNCTION__, lacStatus); -+ krp->krp_status = ECANCELED; -+ return ECANCELED; -+ } -+ -+ break; -+ -+ case CRK_DSA_VERIFY: -+ DPRINTK("%s() doing DSA_VERIFY \n", __FUNCTION__); -+ lacStatus = icp_ocfDrvDsaVerify(krp); -+ if (CPA_STATUS_SUCCESS != lacStatus) { -+ EPRINTK("%s(): icp_ocfDrvDsaVerify " -+ "failed (%d).\n", __FUNCTION__, lacStatus); -+ krp->krp_status = ECANCELED; -+ return ECANCELED; -+ } -+ -+ break; -+ -+ default: -+ EPRINTK("%s(): Asymettric function not " -+ "supported (%d).\n", __FUNCTION__, krp->krp_op); -+ krp->krp_status = EOPNOTSUPP; -+ return EOPNOTSUPP; -+ } -+ -+ return ICP_OCF_DRV_STATUS_SUCCESS; -+} -+ -+/* Name : icp_ocfDrvSwapBytes -+ * -+ * Description : This function is used to swap the byte order of a buffer. -+ * It has been seen that in general we are passed little endian byte order -+ * buffers, but LAC only accepts big endian byte order buffers. -+ */ -+static void inline -+icp_ocfDrvSwapBytes(u_int8_t * num, u_int32_t buff_len_bytes) -+{ -+ -+ int i; -+ u_int8_t *end_ptr; -+ u_int8_t hold_val; -+ -+ end_ptr = num + (buff_len_bytes - 1); -+ buff_len_bytes = buff_len_bytes >> 1; -+ for (i = 0; i < buff_len_bytes; i++) { -+ hold_val = *num; -+ *num = *end_ptr; -+ num++; -+ *end_ptr = hold_val; -+ end_ptr--; -+ } -+} -+ -+/* Name : icp_ocfDrvDHComputeKey -+ * -+ * Description : This function will map Diffie Hellman calls from OCF -+ * to the LAC API. OCF uses this function for Diffie Hellman Phase1 and -+ * Phase2. LAC has a separate Diffie Hellman Phase2 call, however both phases -+ * break down to a modular exponentiation. -+ */ -+static int icp_ocfDrvDHComputeKey(struct cryptkop *krp) -+{ -+ CpaStatus lacStatus = CPA_STATUS_SUCCESS; -+ void *callbackTag = NULL; -+ CpaCyDhPhase1KeyGenOpData *pPhase1OpData = NULL; -+ CpaFlatBuffer *pLocalOctetStringPV = NULL; -+ uint32_t dh_prime_len_bytes = 0, dh_prime_len_bits = 0; -+ -+ /* Input checks - check prime is a multiple of 8 bits to allow for -+ allocation later */ -+ dh_prime_len_bits = -+ (krp->krp_param[ICP_DH_KRP_PARAM_PRIME_INDEX].crp_nbits); -+ -+ /* LAC can reject prime lengths based on prime key sizes, we just -+ need to make sure we can allocate space for the base and -+ exponent buffers correctly */ -+ if ((dh_prime_len_bits % NUM_BITS_IN_BYTE) != 0) { -+ APRINTK("%s(): Warning Prime number buffer size is not a " -+ "multiple of 8 bits\n", __FUNCTION__); -+ } -+ -+ /* Result storage space should be the same size as the prime as this -+ value can take up the same amount of storage space */ -+ if (dh_prime_len_bits != -+ krp->krp_param[ICP_DH_KRP_PARAM_RESULT_INDEX].crp_nbits) { -+ DPRINTK("%s(): Return Buffer must be the same size " -+ "as the Prime buffer\n", __FUNCTION__); -+ krp->krp_status = EINVAL; -+ return EINVAL; -+ } -+ /* Switch to size in bytes */ -+ BITS_TO_BYTES(dh_prime_len_bytes, dh_prime_len_bits); -+ -+ callbackTag = krp; -+ -+ pPhase1OpData = kmem_cache_zalloc(drvDH_zone, GFP_KERNEL); -+ if (NULL == pPhase1OpData) { -+ APRINTK("%s():Failed to get memory for key gen data\n", -+ __FUNCTION__); -+ krp->krp_status = ENOMEM; -+ return ENOMEM; -+ } -+ -+ pLocalOctetStringPV = kmem_cache_zalloc(drvFlatBuffer_zone, GFP_KERNEL); -+ if (NULL == pLocalOctetStringPV) { -+ APRINTK("%s():Failed to get memory for pLocalOctetStringPV\n", -+ __FUNCTION__); -+ kmem_cache_free(drvDH_zone, pPhase1OpData); -+ krp->krp_status = ENOMEM; -+ return ENOMEM; -+ } -+ -+ /* Link parameters */ -+ pPhase1OpData->primeP.pData = -+ krp->krp_param[ICP_DH_KRP_PARAM_PRIME_INDEX].crp_p; -+ -+ pPhase1OpData->primeP.dataLenInBytes = dh_prime_len_bytes; -+ -+ icp_ocfDrvSwapBytes(pPhase1OpData->primeP.pData, dh_prime_len_bytes); -+ -+ pPhase1OpData->baseG.pData = -+ krp->krp_param[ICP_DH_KRP_PARAM_BASE_INDEX].crp_p; -+ -+ BITS_TO_BYTES(pPhase1OpData->baseG.dataLenInBytes, -+ krp->krp_param[ICP_DH_KRP_PARAM_BASE_INDEX].crp_nbits); -+ -+ icp_ocfDrvSwapBytes(pPhase1OpData->baseG.pData, -+ pPhase1OpData->baseG.dataLenInBytes); -+ -+ pPhase1OpData->privateValueX.pData = -+ krp->krp_param[ICP_DH_KRP_PARAM_PRIVATE_VALUE_INDEX].crp_p; -+ -+ BITS_TO_BYTES(pPhase1OpData->privateValueX.dataLenInBytes, -+ krp->krp_param[ICP_DH_KRP_PARAM_PRIVATE_VALUE_INDEX]. -+ crp_nbits); -+ -+ icp_ocfDrvSwapBytes(pPhase1OpData->privateValueX.pData, -+ pPhase1OpData->privateValueX.dataLenInBytes); -+ -+ /* Output parameters */ -+ pLocalOctetStringPV->pData = -+ krp->krp_param[ICP_DH_KRP_PARAM_RESULT_INDEX].crp_p; -+ -+ BITS_TO_BYTES(pLocalOctetStringPV->dataLenInBytes, -+ krp->krp_param[ICP_DH_KRP_PARAM_RESULT_INDEX].crp_nbits); -+ -+ lacStatus = cpaCyDhKeyGenPhase1(CPA_INSTANCE_HANDLE_SINGLE, -+ icp_ocfDrvDhP1CallBack, -+ callbackTag, pPhase1OpData, -+ pLocalOctetStringPV); -+ -+ if (CPA_STATUS_SUCCESS != lacStatus) { -+ EPRINTK("%s(): DH Phase 1 Key Gen failed (%d).\n", -+ __FUNCTION__, lacStatus); -+ icp_ocfDrvFreeFlatBuffer(pLocalOctetStringPV); -+ kmem_cache_free(drvDH_zone, pPhase1OpData); -+ } -+ -+ return lacStatus; -+} -+ -+/* Name : icp_ocfDrvModExp -+ * -+ * Description : This function will map ordinary Modular Exponentiation calls -+ * from OCF to the LAC API. -+ * -+ */ -+static int icp_ocfDrvModExp(struct cryptkop *krp) -+{ -+ CpaStatus lacStatus = CPA_STATUS_SUCCESS; -+ void *callbackTag = NULL; -+ CpaCyLnModExpOpData *pModExpOpData = NULL; -+ CpaFlatBuffer *pResult = NULL; -+ -+ if ((krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX].crp_nbits % -+ NUM_BITS_IN_BYTE) != 0) { -+ DPRINTK("%s(): Warning - modulus buffer size (%d) is not a " -+ "multiple of 8 bits\n", __FUNCTION__, -+ krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX]. -+ crp_nbits); -+ } -+ -+ /* Result storage space should be the same size as the prime as this -+ value can take up the same amount of storage space */ -+ if (krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX].crp_nbits > -+ krp->krp_param[ICP_MOD_EXP_KRP_PARAM_RESULT_INDEX].crp_nbits) { -+ APRINTK("%s(): Return Buffer size must be the same or" -+ " greater than the Modulus buffer\n", __FUNCTION__); -+ krp->krp_status = EINVAL; -+ return EINVAL; -+ } -+ -+ callbackTag = krp; -+ -+ pModExpOpData = kmem_cache_zalloc(drvLnModExp_zone, GFP_KERNEL); -+ if (NULL == pModExpOpData) { -+ APRINTK("%s():Failed to get memory for key gen data\n", -+ __FUNCTION__); -+ krp->krp_status = ENOMEM; -+ return ENOMEM; -+ } -+ -+ pResult = kmem_cache_zalloc(drvFlatBuffer_zone, GFP_KERNEL); -+ if (NULL == pResult) { -+ APRINTK("%s():Failed to get memory for ModExp result\n", -+ __FUNCTION__); -+ kmem_cache_free(drvLnModExp_zone, pModExpOpData); -+ krp->krp_status = ENOMEM; -+ return ENOMEM; -+ } -+ -+ /* Link parameters */ -+ pModExpOpData->modulus.pData = -+ krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX].crp_p; -+ BITS_TO_BYTES(pModExpOpData->modulus.dataLenInBytes, -+ krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX]. -+ crp_nbits); -+ -+ icp_ocfDrvSwapBytes(pModExpOpData->modulus.pData, -+ pModExpOpData->modulus.dataLenInBytes); -+ -+ /*OCF patch to Openswan Pluto regularly sends the base value as 2 -+ bits in size. In this case, it has been found it is better to -+ use the base size memory space as the input buffer (if the number -+ is in bits is less than a byte, the number of bits is the input -+ value) */ -+ if (krp->krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].crp_nbits < -+ NUM_BITS_IN_BYTE) { -+ DPRINTK("%s : base is small (%d)\n", __FUNCTION__, krp-> -+ krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].crp_nbits); -+ pModExpOpData->base.dataLenInBytes = SINGLE_BYTE_VALUE; -+ pModExpOpData->base.pData = -+ (uint8_t *) & (krp-> -+ krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX]. -+ crp_nbits); -+ *((uint32_t *) pModExpOpData->base.pData) = -+ htonl(*((uint32_t *) pModExpOpData->base.pData)); -+ -+ } else { -+ -+ DPRINTK("%s : base is big (%d)\n", __FUNCTION__, krp-> -+ krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].crp_nbits); -+ pModExpOpData->base.pData = -+ krp->krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].crp_p; -+ BITS_TO_BYTES(pModExpOpData->base.dataLenInBytes, -+ krp->krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX]. -+ crp_nbits); -+ icp_ocfDrvSwapBytes(pModExpOpData->base.pData, -+ pModExpOpData->base.dataLenInBytes); -+ } -+ -+ pModExpOpData->exponent.pData = -+ krp->krp_param[ICP_MOD_EXP_KRP_PARAM_EXPONENT_INDEX].crp_p; -+ BITS_TO_BYTES(pModExpOpData->exponent.dataLenInBytes, -+ krp->krp_param[ICP_MOD_EXP_KRP_PARAM_EXPONENT_INDEX]. -+ crp_nbits); -+ -+ icp_ocfDrvSwapBytes(pModExpOpData->exponent.pData, -+ pModExpOpData->exponent.dataLenInBytes); -+ /* Output parameters */ -+ pResult->pData = -+ krp->krp_param[ICP_MOD_EXP_KRP_PARAM_RESULT_INDEX].crp_p, -+ BITS_TO_BYTES(pResult->dataLenInBytes, -+ krp->krp_param[ICP_MOD_EXP_KRP_PARAM_RESULT_INDEX]. -+ crp_nbits); -+ -+ lacStatus = cpaCyLnModExp(CPA_INSTANCE_HANDLE_SINGLE, -+ icp_ocfDrvModExpCallBack, -+ callbackTag, pModExpOpData, pResult); -+ -+ if (CPA_STATUS_SUCCESS != lacStatus) { -+ EPRINTK("%s(): Mod Exp Operation failed (%d).\n", -+ __FUNCTION__, lacStatus); -+ krp->krp_status = ECANCELED; -+ icp_ocfDrvFreeFlatBuffer(pResult); -+ kmem_cache_free(drvLnModExp_zone, pModExpOpData); -+ } -+ -+ return lacStatus; -+} -+ -+/* Name : icp_ocfDrvModExpCRT -+ * -+ * Description : This function will map ordinary Modular Exponentiation Chinese -+ * Remainder Theorem implementaion calls from OCF to the LAC API. -+ * -+ * Note : Mod Exp CRT for this driver is accelerated through LAC RSA type 2 -+ * decrypt operation. Therefore P and Q input values must always be prime -+ * numbers. Although basic primality checks are done in LAC, it is up to the -+ * user to do any correct prime number checking before passing the inputs. -+ */ -+ -+static int icp_ocfDrvModExpCRT(struct cryptkop *krp) -+{ -+ CpaStatus lacStatus = CPA_STATUS_SUCCESS; -+ CpaCyRsaDecryptOpData *rsaDecryptOpData = NULL; -+ void *callbackTag = NULL; -+ CpaFlatBuffer *pOutputData = NULL; -+ -+ /*Parameter input checks are all done by LAC, no need to repeat -+ them here. */ -+ callbackTag = krp; -+ -+ rsaDecryptOpData = kmem_cache_zalloc(drvRSADecrypt_zone, GFP_KERNEL); -+ if (NULL == rsaDecryptOpData) { -+ APRINTK("%s():Failed to get memory" -+ " for MOD EXP CRT Op data struct\n", __FUNCTION__); -+ krp->krp_status = ENOMEM; -+ return ENOMEM; -+ } -+ -+ rsaDecryptOpData->pRecipientPrivateKey -+ = kmem_cache_zalloc(drvRSAPrivateKey_zone, GFP_KERNEL); -+ if (NULL == rsaDecryptOpData->pRecipientPrivateKey) { -+ APRINTK("%s():Failed to get memory for MOD EXP CRT" -+ " private key values struct\n", __FUNCTION__); -+ kmem_cache_free(drvRSADecrypt_zone, rsaDecryptOpData); -+ krp->krp_status = ENOMEM; -+ return ENOMEM; -+ } -+ -+ rsaDecryptOpData->pRecipientPrivateKey-> -+ version = CPA_CY_RSA_VERSION_TWO_PRIME; -+ rsaDecryptOpData->pRecipientPrivateKey-> -+ privateKeyRepType = CPA_CY_RSA_PRIVATE_KEY_REP_TYPE_2; -+ -+ pOutputData = kmem_cache_zalloc(drvFlatBuffer_zone, GFP_KERNEL); -+ if (NULL == pOutputData) { -+ APRINTK("%s():Failed to get memory" -+ " for MOD EXP CRT output data\n", __FUNCTION__); -+ kmem_cache_free(drvRSAPrivateKey_zone, -+ rsaDecryptOpData->pRecipientPrivateKey); -+ kmem_cache_free(drvRSADecrypt_zone, rsaDecryptOpData); -+ krp->krp_status = ENOMEM; -+ return ENOMEM; -+ } -+ -+ rsaDecryptOpData->pRecipientPrivateKey-> -+ version = CPA_CY_RSA_VERSION_TWO_PRIME; -+ rsaDecryptOpData->pRecipientPrivateKey-> -+ privateKeyRepType = CPA_CY_RSA_PRIVATE_KEY_REP_TYPE_2; -+ -+ /* Link parameters */ -+ rsaDecryptOpData->inputData.pData = -+ krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_I_INDEX].crp_p; -+ BITS_TO_BYTES(rsaDecryptOpData->inputData.dataLenInBytes, -+ krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_I_INDEX]. -+ crp_nbits); -+ -+ icp_ocfDrvSwapBytes(rsaDecryptOpData->inputData.pData, -+ rsaDecryptOpData->inputData.dataLenInBytes); -+ -+ rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2.prime1P.pData = -+ krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_P_INDEX].crp_p; -+ BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2. -+ prime1P.dataLenInBytes, -+ krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_P_INDEX]. -+ crp_nbits); -+ -+ icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey-> -+ privateKeyRep2.prime1P.pData, -+ rsaDecryptOpData->pRecipientPrivateKey-> -+ privateKeyRep2.prime1P.dataLenInBytes); -+ -+ rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2.prime2Q.pData = -+ krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_Q_INDEX].crp_p; -+ BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2. -+ prime2Q.dataLenInBytes, -+ krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_Q_INDEX]. -+ crp_nbits); -+ -+ icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey-> -+ privateKeyRep2.prime2Q.pData, -+ rsaDecryptOpData->pRecipientPrivateKey-> -+ privateKeyRep2.prime2Q.dataLenInBytes); -+ -+ rsaDecryptOpData->pRecipientPrivateKey-> -+ privateKeyRep2.exponent1Dp.pData = -+ krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DP_INDEX].crp_p; -+ BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2. -+ exponent1Dp.dataLenInBytes, -+ krp-> -+ krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DP_INDEX]. -+ crp_nbits); -+ -+ icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey-> -+ privateKeyRep2.exponent1Dp.pData, -+ rsaDecryptOpData->pRecipientPrivateKey-> -+ privateKeyRep2.exponent1Dp.dataLenInBytes); -+ -+ rsaDecryptOpData->pRecipientPrivateKey-> -+ privateKeyRep2.exponent2Dq.pData = -+ krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DQ_INDEX].crp_p; -+ BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey-> -+ privateKeyRep2.exponent2Dq.dataLenInBytes, -+ krp-> -+ krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DQ_INDEX]. -+ crp_nbits); -+ -+ icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey-> -+ privateKeyRep2.exponent2Dq.pData, -+ rsaDecryptOpData->pRecipientPrivateKey-> -+ privateKeyRep2.exponent2Dq.dataLenInBytes); -+ -+ rsaDecryptOpData->pRecipientPrivateKey-> -+ privateKeyRep2.coefficientQInv.pData = -+ krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_COEFF_QINV_INDEX].crp_p; -+ BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey-> -+ privateKeyRep2.coefficientQInv.dataLenInBytes, -+ krp-> -+ krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_COEFF_QINV_INDEX]. -+ crp_nbits); -+ -+ icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey-> -+ privateKeyRep2.coefficientQInv.pData, -+ rsaDecryptOpData->pRecipientPrivateKey-> -+ privateKeyRep2.coefficientQInv.dataLenInBytes); -+ -+ /* Output Parameter */ -+ pOutputData->pData = -+ krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_RESULT_INDEX].crp_p; -+ BITS_TO_BYTES(pOutputData->dataLenInBytes, -+ krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_RESULT_INDEX]. -+ crp_nbits); -+ -+ lacStatus = cpaCyRsaDecrypt(CPA_INSTANCE_HANDLE_SINGLE, -+ icp_ocfDrvModExpCRTCallBack, -+ callbackTag, rsaDecryptOpData, pOutputData); -+ -+ if (CPA_STATUS_SUCCESS != lacStatus) { -+ EPRINTK("%s(): Mod Exp CRT Operation failed (%d).\n", -+ __FUNCTION__, lacStatus); -+ krp->krp_status = ECANCELED; -+ icp_ocfDrvFreeFlatBuffer(pOutputData); -+ kmem_cache_free(drvRSAPrivateKey_zone, -+ rsaDecryptOpData->pRecipientPrivateKey); -+ kmem_cache_free(drvRSADecrypt_zone, rsaDecryptOpData); -+ } -+ -+ return lacStatus; -+} -+ -+/* Name : icp_ocfDrvCheckALessThanB -+ * -+ * Description : This function will check whether the first argument is less -+ * than the second. It is used to check whether the DSA RS sign Random K -+ * value is less than the Prime Q value (as defined in the specification) -+ * -+ */ -+static int -+icp_ocfDrvCheckALessThanB(CpaFlatBuffer * pK, CpaFlatBuffer * pQ, int *doCheck) -+{ -+ -+ uint8_t *MSB_K = pK->pData; -+ uint8_t *MSB_Q = pQ->pData; -+ uint32_t buffer_lengths_in_bytes = pQ->dataLenInBytes; -+ -+ if (DONT_RUN_LESS_THAN_CHECK == *doCheck) { -+ return FAIL_A_IS_GREATER_THAN_B; -+ } -+ -+/*Check MSBs -+if A == B, check next MSB -+if A > B, return A_IS_GREATER_THAN_B -+if A < B, return A_IS_LESS_THAN_B (success) -+*/ -+ while (*MSB_K == *MSB_Q) { -+ MSB_K++; -+ MSB_Q++; -+ -+ buffer_lengths_in_bytes--; -+ if (0 == buffer_lengths_in_bytes) { -+ DPRINTK("%s() Buffers have equal value!!\n", -+ __FUNCTION__); -+ return FAIL_A_IS_EQUAL_TO_B; -+ } -+ -+ } -+ -+ if (*MSB_K < *MSB_Q) { -+ return SUCCESS_A_IS_LESS_THAN_B; -+ } else { -+ return FAIL_A_IS_GREATER_THAN_B; -+ } -+ -+} -+ -+/* Name : icp_ocfDrvDsaSign -+ * -+ * Description : This function will map DSA RS Sign from OCF to the LAC API. -+ * -+ * NOTE: From looking at OCF patch to OpenSSL and even the number of input -+ * parameters, OCF expects us to generate the random seed value. This value -+ * is generated and passed to LAC, however the number is discared in the -+ * callback and not returned to the user. -+ */ -+static int icp_ocfDrvDsaSign(struct cryptkop *krp) -+{ -+ CpaStatus lacStatus = CPA_STATUS_SUCCESS; -+ CpaCyDsaRSSignOpData *dsaRsSignOpData = NULL; -+ void *callbackTag = NULL; -+ CpaCyRandGenOpData randGenOpData; -+ int primeQSizeInBytes = 0; -+ int doCheck = 0; -+ CpaFlatBuffer randData; -+ CpaBoolean protocolStatus = CPA_FALSE; -+ CpaFlatBuffer *pR = NULL; -+ CpaFlatBuffer *pS = NULL; -+ -+ callbackTag = krp; -+ -+ BITS_TO_BYTES(primeQSizeInBytes, -+ krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_Q_INDEX]. -+ crp_nbits); -+ -+ if (DSA_RS_SIGN_PRIMEQ_SIZE_IN_BYTES != primeQSizeInBytes) { -+ APRINTK("%s(): DSA PRIME Q size not equal to the " -+ "FIPS defined 20bytes, = %d\n", -+ __FUNCTION__, primeQSizeInBytes); -+ krp->krp_status = EDOM; -+ return EDOM; -+ } -+ -+ dsaRsSignOpData = kmem_cache_zalloc(drvDSARSSign_zone, GFP_KERNEL); -+ if (NULL == dsaRsSignOpData) { -+ APRINTK("%s():Failed to get memory" -+ " for DSA RS Sign Op data struct\n", __FUNCTION__); -+ krp->krp_status = ENOMEM; -+ return ENOMEM; -+ } -+ -+ dsaRsSignOpData->K.pData = -+ kmem_cache_alloc(drvDSARSSignKValue_zone, GFP_ATOMIC); -+ -+ if (NULL == dsaRsSignOpData->K.pData) { -+ APRINTK("%s():Failed to get memory" -+ " for DSA RS Sign Op Random value\n", __FUNCTION__); -+ kmem_cache_free(drvDSARSSign_zone, dsaRsSignOpData); -+ krp->krp_status = ENOMEM; -+ return ENOMEM; -+ } -+ -+ pR = kmem_cache_zalloc(drvFlatBuffer_zone, GFP_KERNEL); -+ if (NULL == pR) { -+ APRINTK("%s():Failed to get memory" -+ " for DSA signature R\n", __FUNCTION__); -+ kmem_cache_free(drvDSARSSignKValue_zone, -+ dsaRsSignOpData->K.pData); -+ kmem_cache_free(drvDSARSSign_zone, dsaRsSignOpData); -+ krp->krp_status = ENOMEM; -+ return ENOMEM; -+ } -+ -+ pS = kmem_cache_zalloc(drvFlatBuffer_zone, GFP_KERNEL); -+ if (NULL == pS) { -+ APRINTK("%s():Failed to get memory" -+ " for DSA signature S\n", __FUNCTION__); -+ icp_ocfDrvFreeFlatBuffer(pR); -+ kmem_cache_free(drvDSARSSignKValue_zone, -+ dsaRsSignOpData->K.pData); -+ kmem_cache_free(drvDSARSSign_zone, dsaRsSignOpData); -+ krp->krp_status = ENOMEM; -+ return ENOMEM; -+ } -+ -+ /*link prime number parameter for ease of processing */ -+ dsaRsSignOpData->P.pData = -+ krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_P_INDEX].crp_p; -+ BITS_TO_BYTES(dsaRsSignOpData->P.dataLenInBytes, -+ krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_P_INDEX]. -+ crp_nbits); -+ -+ icp_ocfDrvSwapBytes(dsaRsSignOpData->P.pData, -+ dsaRsSignOpData->P.dataLenInBytes); -+ -+ dsaRsSignOpData->Q.pData = -+ krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_Q_INDEX].crp_p; -+ BITS_TO_BYTES(dsaRsSignOpData->Q.dataLenInBytes, -+ krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_Q_INDEX]. -+ crp_nbits); -+ -+ icp_ocfDrvSwapBytes(dsaRsSignOpData->Q.pData, -+ dsaRsSignOpData->Q.dataLenInBytes); -+ -+ /*generate random number with equal buffer size to Prime value Q, -+ but value less than Q */ -+ dsaRsSignOpData->K.dataLenInBytes = dsaRsSignOpData->Q.dataLenInBytes; -+ -+ randGenOpData.generateBits = CPA_TRUE; -+ randGenOpData.lenInBytes = dsaRsSignOpData->K.dataLenInBytes; -+ -+ icp_ocfDrvPtrAndLenToFlatBuffer(dsaRsSignOpData->K.pData, -+ dsaRsSignOpData->K.dataLenInBytes, -+ &randData); -+ -+ doCheck = 0; -+ while (icp_ocfDrvCheckALessThanB(&(dsaRsSignOpData->K), -+ &(dsaRsSignOpData->Q), &doCheck)) { -+ -+ if (CPA_STATUS_SUCCESS -+ != cpaCyRandGen(CPA_INSTANCE_HANDLE_SINGLE, -+ NULL, NULL, &randGenOpData, &randData)) { -+ APRINTK("%s(): ERROR - Failed to generate DSA RS Sign K" -+ "value\n", __FUNCTION__); -+ icp_ocfDrvFreeFlatBuffer(pS); -+ icp_ocfDrvFreeFlatBuffer(pR); -+ kmem_cache_free(drvDSARSSignKValue_zone, -+ dsaRsSignOpData->K.pData); -+ kmem_cache_free(drvDSARSSign_zone, dsaRsSignOpData); -+ krp->krp_status = EAGAIN; -+ return EAGAIN; -+ } -+ -+ doCheck++; -+ if (DSA_SIGN_RAND_GEN_VAL_CHECK_MAX_ITERATIONS == doCheck) { -+ APRINTK("%s(): ERROR - Failed to find DSA RS Sign K " -+ "value less than Q value\n", __FUNCTION__); -+ icp_ocfDrvFreeFlatBuffer(pS); -+ icp_ocfDrvFreeFlatBuffer(pR); -+ kmem_cache_free(drvDSARSSignKValue_zone, -+ dsaRsSignOpData->K.pData); -+ kmem_cache_free(drvDSARSSign_zone, dsaRsSignOpData); -+ krp->krp_status = EAGAIN; -+ return EAGAIN; -+ } -+ -+ } -+ /*Rand Data - no need to swap bytes for pK */ -+ -+ /* Link parameters */ -+ dsaRsSignOpData->G.pData = -+ krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_G_INDEX].crp_p; -+ BITS_TO_BYTES(dsaRsSignOpData->G.dataLenInBytes, -+ krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_G_INDEX].crp_nbits); -+ -+ icp_ocfDrvSwapBytes(dsaRsSignOpData->G.pData, -+ dsaRsSignOpData->G.dataLenInBytes); -+ -+ dsaRsSignOpData->X.pData = -+ krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_X_INDEX].crp_p; -+ BITS_TO_BYTES(dsaRsSignOpData->X.dataLenInBytes, -+ krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_X_INDEX].crp_nbits); -+ icp_ocfDrvSwapBytes(dsaRsSignOpData->X.pData, -+ dsaRsSignOpData->X.dataLenInBytes); -+ -+ dsaRsSignOpData->M.pData = -+ krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_DGST_INDEX].crp_p; -+ BITS_TO_BYTES(dsaRsSignOpData->M.dataLenInBytes, -+ krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_DGST_INDEX]. -+ crp_nbits); -+ icp_ocfDrvSwapBytes(dsaRsSignOpData->M.pData, -+ dsaRsSignOpData->M.dataLenInBytes); -+ -+ /* Output Parameters */ -+ pS->pData = krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_S_RESULT_INDEX].crp_p; -+ BITS_TO_BYTES(pS->dataLenInBytes, -+ krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_S_RESULT_INDEX]. -+ crp_nbits); -+ -+ pR->pData = krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_R_RESULT_INDEX].crp_p; -+ BITS_TO_BYTES(pR->dataLenInBytes, -+ krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_R_RESULT_INDEX]. -+ crp_nbits); -+ -+ lacStatus = cpaCyDsaSignRS(CPA_INSTANCE_HANDLE_SINGLE, -+ icp_ocfDrvDsaRSSignCallBack, -+ callbackTag, dsaRsSignOpData, -+ &protocolStatus, pR, pS); -+ -+ if (CPA_STATUS_SUCCESS != lacStatus) { -+ EPRINTK("%s(): DSA RS Sign Operation failed (%d).\n", -+ __FUNCTION__, lacStatus); -+ krp->krp_status = ECANCELED; -+ icp_ocfDrvFreeFlatBuffer(pS); -+ icp_ocfDrvFreeFlatBuffer(pR); -+ kmem_cache_free(drvDSARSSignKValue_zone, -+ dsaRsSignOpData->K.pData); -+ kmem_cache_free(drvDSARSSign_zone, dsaRsSignOpData); -+ } -+ -+ return lacStatus; -+} -+ -+/* Name : icp_ocfDrvDsaVerify -+ * -+ * Description : This function will map DSA RS Verify from OCF to the LAC API. -+ * -+ */ -+static int icp_ocfDrvDsaVerify(struct cryptkop *krp) -+{ -+ CpaStatus lacStatus = CPA_STATUS_SUCCESS; -+ CpaCyDsaVerifyOpData *dsaVerifyOpData = NULL; -+ void *callbackTag = NULL; -+ CpaBoolean verifyStatus = CPA_FALSE; -+ -+ callbackTag = krp; -+ -+ dsaVerifyOpData = kmem_cache_zalloc(drvDSAVerify_zone, GFP_KERNEL); -+ if (NULL == dsaVerifyOpData) { -+ APRINTK("%s():Failed to get memory" -+ " for DSA Verify Op data struct\n", __FUNCTION__); -+ krp->krp_status = ENOMEM; -+ return ENOMEM; -+ } -+ -+ /* Link parameters */ -+ dsaVerifyOpData->P.pData = -+ krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PRIME_P_INDEX].crp_p; -+ BITS_TO_BYTES(dsaVerifyOpData->P.dataLenInBytes, -+ krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PRIME_P_INDEX]. -+ crp_nbits); -+ icp_ocfDrvSwapBytes(dsaVerifyOpData->P.pData, -+ dsaVerifyOpData->P.dataLenInBytes); -+ -+ dsaVerifyOpData->Q.pData = -+ krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PRIME_Q_INDEX].crp_p; -+ BITS_TO_BYTES(dsaVerifyOpData->Q.dataLenInBytes, -+ krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PRIME_Q_INDEX]. -+ crp_nbits); -+ icp_ocfDrvSwapBytes(dsaVerifyOpData->Q.pData, -+ dsaVerifyOpData->Q.dataLenInBytes); -+ -+ dsaVerifyOpData->G.pData = -+ krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_G_INDEX].crp_p; -+ BITS_TO_BYTES(dsaVerifyOpData->G.dataLenInBytes, -+ krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_G_INDEX]. -+ crp_nbits); -+ icp_ocfDrvSwapBytes(dsaVerifyOpData->G.pData, -+ dsaVerifyOpData->G.dataLenInBytes); -+ -+ dsaVerifyOpData->Y.pData = -+ krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PUBKEY_INDEX].crp_p; -+ BITS_TO_BYTES(dsaVerifyOpData->Y.dataLenInBytes, -+ krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PUBKEY_INDEX]. -+ crp_nbits); -+ icp_ocfDrvSwapBytes(dsaVerifyOpData->Y.pData, -+ dsaVerifyOpData->Y.dataLenInBytes); -+ -+ dsaVerifyOpData->M.pData = -+ krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_DGST_INDEX].crp_p; -+ BITS_TO_BYTES(dsaVerifyOpData->M.dataLenInBytes, -+ krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_DGST_INDEX]. -+ crp_nbits); -+ icp_ocfDrvSwapBytes(dsaVerifyOpData->M.pData, -+ dsaVerifyOpData->M.dataLenInBytes); -+ -+ dsaVerifyOpData->R.pData = -+ krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_SIG_R_INDEX].crp_p; -+ BITS_TO_BYTES(dsaVerifyOpData->R.dataLenInBytes, -+ krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_SIG_R_INDEX]. -+ crp_nbits); -+ icp_ocfDrvSwapBytes(dsaVerifyOpData->R.pData, -+ dsaVerifyOpData->R.dataLenInBytes); -+ -+ dsaVerifyOpData->S.pData = -+ krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_SIG_S_INDEX].crp_p; -+ BITS_TO_BYTES(dsaVerifyOpData->S.dataLenInBytes, -+ krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_SIG_S_INDEX]. -+ crp_nbits); -+ icp_ocfDrvSwapBytes(dsaVerifyOpData->S.pData, -+ dsaVerifyOpData->S.dataLenInBytes); -+ -+ lacStatus = cpaCyDsaVerify(CPA_INSTANCE_HANDLE_SINGLE, -+ icp_ocfDrvDsaVerifyCallBack, -+ callbackTag, dsaVerifyOpData, &verifyStatus); -+ -+ if (CPA_STATUS_SUCCESS != lacStatus) { -+ EPRINTK("%s(): DSA Verify Operation failed (%d).\n", -+ __FUNCTION__, lacStatus); -+ kmem_cache_free(drvDSAVerify_zone, dsaVerifyOpData); -+ krp->krp_status = ECANCELED; -+ } -+ -+ return lacStatus; -+} -+ -+/* Name : icp_ocfDrvReadRandom -+ * -+ * Description : This function will map RNG functionality calls from OCF -+ * to the LAC API. -+ */ -+int icp_ocfDrvReadRandom(void *arg, uint32_t * buf, int maxwords) -+{ -+ CpaStatus lacStatus = CPA_STATUS_SUCCESS; -+ CpaCyRandGenOpData randGenOpData; -+ CpaFlatBuffer randData; -+ -+ if (NULL == buf) { -+ APRINTK("%s(): Invalid input parameters\n", __FUNCTION__); -+ return EINVAL; -+ } -+ -+ /* maxwords here is number of integers to generate data for */ -+ randGenOpData.generateBits = CPA_TRUE; -+ -+ randGenOpData.lenInBytes = maxwords * sizeof(uint32_t); -+ -+ icp_ocfDrvPtrAndLenToFlatBuffer((Cpa8U *) buf, -+ randGenOpData.lenInBytes, &randData); -+ -+ lacStatus = cpaCyRandGen(CPA_INSTANCE_HANDLE_SINGLE, -+ NULL, NULL, &randGenOpData, &randData); -+ if (CPA_STATUS_SUCCESS != lacStatus) { -+ EPRINTK("%s(): icp_LacSymRandGen failed (%d). \n", -+ __FUNCTION__, lacStatus); -+ return RETURN_RAND_NUM_GEN_FAILED; -+ } -+ -+ return randGenOpData.lenInBytes / sizeof(uint32_t); -+} -+ -+/* Name : icp_ocfDrvDhP1Callback -+ * -+ * Description : When this function returns it signifies that the LAC -+ * component has completed the DH operation. -+ */ -+static void -+icp_ocfDrvDhP1CallBack(void *callbackTag, -+ CpaStatus status, -+ void *pOpData, CpaFlatBuffer * pLocalOctetStringPV) -+{ -+ struct cryptkop *krp = NULL; -+ CpaCyDhPhase1KeyGenOpData *pPhase1OpData = NULL; -+ -+ if (NULL == callbackTag) { -+ DPRINTK("%s(): Invalid input parameters - " -+ "callbackTag data is NULL\n", __FUNCTION__); -+ return; -+ } -+ krp = (struct cryptkop *)callbackTag; -+ -+ if (NULL == pOpData) { -+ DPRINTK("%s(): Invalid input parameters - " -+ "Operation Data is NULL\n", __FUNCTION__); -+ krp->krp_status = ECANCELED; -+ crypto_kdone(krp); -+ return; -+ } -+ pPhase1OpData = (CpaCyDhPhase1KeyGenOpData *) pOpData; -+ -+ if (NULL == pLocalOctetStringPV) { -+ DPRINTK("%s(): Invalid input parameters - " -+ "pLocalOctetStringPV Data is NULL\n", __FUNCTION__); -+ memset(pPhase1OpData, 0, sizeof(CpaCyDhPhase1KeyGenOpData)); -+ kmem_cache_free(drvDH_zone, pPhase1OpData); -+ krp->krp_status = ECANCELED; -+ crypto_kdone(krp); -+ return; -+ } -+ -+ if (CPA_STATUS_SUCCESS == status) { -+ krp->krp_status = CRYPTO_OP_SUCCESS; -+ } else { -+ APRINTK("%s(): Diffie Hellman Phase1 Key Gen failed - " -+ "Operation Status = %d\n", __FUNCTION__, status); -+ krp->krp_status = ECANCELED; -+ } -+ -+ icp_ocfDrvSwapBytes(pLocalOctetStringPV->pData, -+ pLocalOctetStringPV->dataLenInBytes); -+ -+ icp_ocfDrvFreeFlatBuffer(pLocalOctetStringPV); -+ memset(pPhase1OpData, 0, sizeof(CpaCyDhPhase1KeyGenOpData)); -+ kmem_cache_free(drvDH_zone, pPhase1OpData); -+ -+ crypto_kdone(krp); -+ -+ return; -+} -+ -+/* Name : icp_ocfDrvModExpCallBack -+ * -+ * Description : When this function returns it signifies that the LAC -+ * component has completed the Mod Exp operation. -+ */ -+static void -+icp_ocfDrvModExpCallBack(void *callbackTag, -+ CpaStatus status, -+ void *pOpdata, CpaFlatBuffer * pResult) -+{ -+ struct cryptkop *krp = NULL; -+ CpaCyLnModExpOpData *pLnModExpOpData = NULL; -+ -+ if (NULL == callbackTag) { -+ DPRINTK("%s(): Invalid input parameters - " -+ "callbackTag data is NULL\n", __FUNCTION__); -+ return; -+ } -+ krp = (struct cryptkop *)callbackTag; -+ -+ if (NULL == pOpdata) { -+ DPRINTK("%s(): Invalid Mod Exp input parameters - " -+ "Operation Data is NULL\n", __FUNCTION__); -+ krp->krp_status = ECANCELED; -+ crypto_kdone(krp); -+ return; -+ } -+ pLnModExpOpData = (CpaCyLnModExpOpData *) pOpdata; -+ -+ if (NULL == pResult) { -+ DPRINTK("%s(): Invalid input parameters - " -+ "pResult data is NULL\n", __FUNCTION__); -+ krp->krp_status = ECANCELED; -+ memset(pLnModExpOpData, 0, sizeof(CpaCyLnModExpOpData)); -+ kmem_cache_free(drvLnModExp_zone, pLnModExpOpData); -+ crypto_kdone(krp); -+ return; -+ } -+ -+ if (CPA_STATUS_SUCCESS == status) { -+ krp->krp_status = CRYPTO_OP_SUCCESS; -+ } else { -+ APRINTK("%s(): LAC Mod Exp Operation failed - " -+ "Operation Status = %d\n", __FUNCTION__, status); -+ krp->krp_status = ECANCELED; -+ } -+ -+ icp_ocfDrvSwapBytes(pResult->pData, pResult->dataLenInBytes); -+ -+ /*switch base size value back to original */ -+ if (pLnModExpOpData->base.pData == -+ (uint8_t *) & (krp-> -+ krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX]. -+ crp_nbits)) { -+ *((uint32_t *) pLnModExpOpData->base.pData) = -+ ntohl(*((uint32_t *) pLnModExpOpData->base.pData)); -+ } -+ icp_ocfDrvFreeFlatBuffer(pResult); -+ memset(pLnModExpOpData, 0, sizeof(CpaCyLnModExpOpData)); -+ kmem_cache_free(drvLnModExp_zone, pLnModExpOpData); -+ -+ crypto_kdone(krp); -+ -+ return; -+ -+} -+ -+/* Name : icp_ocfDrvModExpCRTCallBack -+ * -+ * Description : When this function returns it signifies that the LAC -+ * component has completed the Mod Exp CRT operation. -+ */ -+static void -+icp_ocfDrvModExpCRTCallBack(void *callbackTag, -+ CpaStatus status, -+ void *pOpData, CpaFlatBuffer * pOutputData) -+{ -+ struct cryptkop *krp = NULL; -+ CpaCyRsaDecryptOpData *pDecryptData = NULL; -+ -+ if (NULL == callbackTag) { -+ DPRINTK("%s(): Invalid input parameters - " -+ "callbackTag data is NULL\n", __FUNCTION__); -+ return; -+ } -+ -+ krp = (struct cryptkop *)callbackTag; -+ -+ if (NULL == pOpData) { -+ DPRINTK("%s(): Invalid input parameters - " -+ "Operation Data is NULL\n", __FUNCTION__); -+ krp->krp_status = ECANCELED; -+ crypto_kdone(krp); -+ return; -+ } -+ pDecryptData = (CpaCyRsaDecryptOpData *) pOpData; -+ -+ if (NULL == pOutputData) { -+ DPRINTK("%s(): Invalid input parameter - " -+ "pOutputData is NULL\n", __FUNCTION__); -+ memset(pDecryptData->pRecipientPrivateKey, 0, -+ sizeof(CpaCyRsaPrivateKey)); -+ kmem_cache_free(drvRSAPrivateKey_zone, -+ pDecryptData->pRecipientPrivateKey); -+ memset(pDecryptData, 0, sizeof(CpaCyRsaDecryptOpData)); -+ kmem_cache_free(drvRSADecrypt_zone, pDecryptData); -+ krp->krp_status = ECANCELED; -+ crypto_kdone(krp); -+ return; -+ } -+ -+ if (CPA_STATUS_SUCCESS == status) { -+ krp->krp_status = CRYPTO_OP_SUCCESS; -+ } else { -+ APRINTK("%s(): LAC Mod Exp CRT operation failed - " -+ "Operation Status = %d\n", __FUNCTION__, status); -+ krp->krp_status = ECANCELED; -+ } -+ -+ icp_ocfDrvSwapBytes(pOutputData->pData, pOutputData->dataLenInBytes); -+ -+ icp_ocfDrvFreeFlatBuffer(pOutputData); -+ memset(pDecryptData->pRecipientPrivateKey, 0, -+ sizeof(CpaCyRsaPrivateKey)); -+ kmem_cache_free(drvRSAPrivateKey_zone, -+ pDecryptData->pRecipientPrivateKey); -+ memset(pDecryptData, 0, sizeof(CpaCyRsaDecryptOpData)); -+ kmem_cache_free(drvRSADecrypt_zone, pDecryptData); -+ -+ crypto_kdone(krp); -+ -+ return; -+} -+ -+/* Name : icp_ocfDrvDsaRSSignCallBack -+ * -+ * Description : When this function returns it signifies that the LAC -+ * component has completed the DSA RS sign operation. -+ */ -+static void -+icp_ocfDrvDsaRSSignCallBack(void *callbackTag, -+ CpaStatus status, -+ void *pOpData, -+ CpaBoolean protocolStatus, -+ CpaFlatBuffer * pR, CpaFlatBuffer * pS) -+{ -+ struct cryptkop *krp = NULL; -+ CpaCyDsaRSSignOpData *pSignData = NULL; -+ -+ if (NULL == callbackTag) { -+ DPRINTK("%s(): Invalid input parameters - " -+ "callbackTag data is NULL\n", __FUNCTION__); -+ return; -+ } -+ -+ krp = (struct cryptkop *)callbackTag; -+ -+ if (NULL == pOpData) { -+ DPRINTK("%s(): Invalid input parameters - " -+ "Operation Data is NULL\n", __FUNCTION__); -+ krp->krp_status = ECANCELED; -+ crypto_kdone(krp); -+ return; -+ } -+ pSignData = (CpaCyDsaRSSignOpData *) pOpData; -+ -+ if (NULL == pR) { -+ DPRINTK("%s(): Invalid input parameter - " -+ "pR sign is NULL\n", __FUNCTION__); -+ icp_ocfDrvFreeFlatBuffer(pS); -+ kmem_cache_free(drvDSARSSign_zone, pSignData); -+ krp->krp_status = ECANCELED; -+ crypto_kdone(krp); -+ return; -+ } -+ -+ if (NULL == pS) { -+ DPRINTK("%s(): Invalid input parameter - " -+ "pS sign is NULL\n", __FUNCTION__); -+ icp_ocfDrvFreeFlatBuffer(pR); -+ kmem_cache_free(drvDSARSSign_zone, pSignData); -+ krp->krp_status = ECANCELED; -+ crypto_kdone(krp); -+ return; -+ } -+ -+ if (CPA_STATUS_SUCCESS != status) { -+ APRINTK("%s(): LAC DSA RS Sign operation failed - " -+ "Operation Status = %d\n", __FUNCTION__, status); -+ krp->krp_status = ECANCELED; -+ } else { -+ krp->krp_status = CRYPTO_OP_SUCCESS; -+ -+ if (CPA_TRUE != protocolStatus) { -+ DPRINTK("%s(): LAC DSA RS Sign operation failed due " -+ "to protocol error\n", __FUNCTION__); -+ krp->krp_status = EIO; -+ } -+ } -+ -+ /* Swap bytes only when the callback status is successful and -+ protocolStatus is set to true */ -+ if (CPA_STATUS_SUCCESS == status && CPA_TRUE == protocolStatus) { -+ icp_ocfDrvSwapBytes(pR->pData, pR->dataLenInBytes); -+ icp_ocfDrvSwapBytes(pS->pData, pS->dataLenInBytes); -+ } -+ -+ icp_ocfDrvFreeFlatBuffer(pR); -+ icp_ocfDrvFreeFlatBuffer(pS); -+ memset(pSignData->K.pData, 0, pSignData->K.dataLenInBytes); -+ kmem_cache_free(drvDSARSSignKValue_zone, pSignData->K.pData); -+ memset(pSignData, 0, sizeof(CpaCyDsaRSSignOpData)); -+ kmem_cache_free(drvDSARSSign_zone, pSignData); -+ crypto_kdone(krp); -+ -+ return; -+} -+ -+/* Name : icp_ocfDrvDsaVerifyCallback -+ * -+ * Description : When this function returns it signifies that the LAC -+ * component has completed the DSA Verify operation. -+ */ -+static void -+icp_ocfDrvDsaVerifyCallBack(void *callbackTag, -+ CpaStatus status, -+ void *pOpData, CpaBoolean verifyStatus) -+{ -+ -+ struct cryptkop *krp = NULL; -+ CpaCyDsaVerifyOpData *pVerData = NULL; -+ -+ if (NULL == callbackTag) { -+ DPRINTK("%s(): Invalid input parameters - " -+ "callbackTag data is NULL\n", __FUNCTION__); -+ return; -+ } -+ -+ krp = (struct cryptkop *)callbackTag; -+ -+ if (NULL == pOpData) { -+ DPRINTK("%s(): Invalid input parameters - " -+ "Operation Data is NULL\n", __FUNCTION__); -+ krp->krp_status = ECANCELED; -+ crypto_kdone(krp); -+ return; -+ } -+ pVerData = (CpaCyDsaVerifyOpData *) pOpData; -+ -+ if (CPA_STATUS_SUCCESS != status) { -+ APRINTK("%s(): LAC DSA Verify operation failed - " -+ "Operation Status = %d\n", __FUNCTION__, status); -+ krp->krp_status = ECANCELED; -+ } else { -+ krp->krp_status = CRYPTO_OP_SUCCESS; -+ -+ if (CPA_TRUE != verifyStatus) { -+ DPRINTK("%s(): DSA signature invalid\n", __FUNCTION__); -+ krp->krp_status = EIO; -+ } -+ } -+ -+ /* Swap bytes only when the callback status is successful and -+ verifyStatus is set to true */ -+ /*Just swapping back the key values for now. Possibly all -+ swapped buffers need to be reverted */ -+ if (CPA_STATUS_SUCCESS == status && CPA_TRUE == verifyStatus) { -+ icp_ocfDrvSwapBytes(pVerData->R.pData, -+ pVerData->R.dataLenInBytes); -+ icp_ocfDrvSwapBytes(pVerData->S.pData, -+ pVerData->S.dataLenInBytes); -+ } -+ -+ memset(pVerData, 0, sizeof(CpaCyDsaVerifyOpData)); -+ kmem_cache_free(drvDSAVerify_zone, pVerData); -+ crypto_kdone(krp); -+ -+ return; -+} -diff -Nur linux-2.6.30.orig/crypto/ocf/ep80579/icp_common.c linux-2.6.30/crypto/ocf/ep80579/icp_common.c ---- linux-2.6.30.orig/crypto/ocf/ep80579/icp_common.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/ep80579/icp_common.c 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,891 @@ -+/*************************************************************************** -+ * -+ * This file is provided under a dual BSD/GPLv2 license. When using or -+ * redistributing this file, you may do so under either license. -+ * -+ * GPL LICENSE SUMMARY -+ * -+ * Copyright(c) 2007,2008 Intel Corporation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of version 2 of the GNU General Public License as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. -+ * The full GNU General Public License is included in this distribution -+ * in the file called LICENSE.GPL. -+ * -+ * Contact Information: -+ * Intel Corporation -+ * -+ * BSD LICENSE -+ * -+ * Copyright(c) 2007,2008 Intel Corporation. All rights reserved. -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * -+ * * Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * * Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in -+ * the documentation and/or other materials provided with the -+ * distribution. -+ * * Neither the name of Intel Corporation nor the names of its -+ * contributors may be used to endorse or promote products derived -+ * from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * -+ * version: Security.L.1.0.130 -+ * -+ ***************************************************************************/ -+ -+/* -+ * An OCF module that uses Intel® QuickAssist Integrated Accelerator to do the -+ * crypto. -+ * -+ * This driver requires the ICP Access Library that is available from Intel in -+ * order to operate. -+ */ -+ -+#include "icp_ocf.h" -+ -+#define ICP_OCF_COMP_NAME "ICP_OCF" -+#define ICP_OCF_VER_MAIN (2) -+#define ICP_OCF_VER_MJR (0) -+#define ICP_OCF_VER_MNR (0) -+ -+#define MAX_DEREG_RETRIES (100) -+#define DEFAULT_DEREG_RETRIES (10) -+#define DEFAULT_DEREG_DELAY_IN_JIFFIES (10) -+ -+/* This defines the maximum number of sessions possible between OCF -+ and the OCF Tolapai Driver. If set to zero, there is no limit. */ -+#define DEFAULT_OCF_TO_DRV_MAX_SESSION_COUNT (0) -+#define NUM_SUPPORTED_CAPABILITIES (21) -+ -+/*Slabs zones*/ -+struct kmem_cache *drvSessionData_zone = NULL; -+struct kmem_cache *drvOpData_zone = NULL; -+struct kmem_cache *drvDH_zone = NULL; -+struct kmem_cache *drvLnModExp_zone = NULL; -+struct kmem_cache *drvRSADecrypt_zone = NULL; -+struct kmem_cache *drvRSAPrivateKey_zone = NULL; -+struct kmem_cache *drvDSARSSign_zone = NULL; -+struct kmem_cache *drvDSARSSignKValue_zone = NULL; -+struct kmem_cache *drvDSAVerify_zone = NULL; -+ -+/*Slab zones for flatbuffers and bufferlist*/ -+struct kmem_cache *drvFlatBuffer_zone = NULL; -+ -+static int icp_ocfDrvInit(void); -+static void icp_ocfDrvExit(void); -+static void icp_ocfDrvFreeCaches(void); -+static void icp_ocfDrvDeferedFreeLacSessionProcess(void *arg); -+ -+int32_t icp_ocfDrvDriverId = INVALID_DRIVER_ID; -+ -+/* Module parameter - gives the number of times LAC deregistration shall be -+ re-tried */ -+int num_dereg_retries = DEFAULT_DEREG_RETRIES; -+ -+/* Module parameter - gives the delay time in jiffies before a LAC session -+ shall be attempted to be deregistered again */ -+int dereg_retry_delay_in_jiffies = DEFAULT_DEREG_DELAY_IN_JIFFIES; -+ -+/* Module parameter - gives the maximum number of sessions possible between -+ OCF and the OCF Tolapai Driver. If set to zero, there is no limit.*/ -+int max_sessions = DEFAULT_OCF_TO_DRV_MAX_SESSION_COUNT; -+ -+/* This is set when the module is removed from the system, no further -+ processing can take place if this is set */ -+atomic_t icp_ocfDrvIsExiting = ATOMIC_INIT(0); -+ -+/* This is used to show how many lac sessions were not deregistered*/ -+atomic_t lac_session_failed_dereg_count = ATOMIC_INIT(0); -+ -+/* This is used to track the number of registered sessions between OCF and -+ * and the OCF Tolapai driver, when max_session is set to value other than -+ * zero. This ensures that the max_session set for the OCF and the driver -+ * is equal to the LAC registered sessions */ -+atomic_t num_ocf_to_drv_registered_sessions = ATOMIC_INIT(0); -+ -+/* Head of linked list used to store session data */ -+struct list_head icp_ocfDrvGlobalSymListHead; -+struct list_head icp_ocfDrvGlobalSymListHead_FreeMemList; -+ -+spinlock_t icp_ocfDrvSymSessInfoListSpinlock = SPIN_LOCK_UNLOCKED; -+rwlock_t icp_kmem_cache_destroy_alloc_lock = RW_LOCK_UNLOCKED; -+ -+struct workqueue_struct *icp_ocfDrvFreeLacSessionWorkQ; -+ -+struct icp_drvBuffListInfo defBuffListInfo; -+ -+static struct { -+ softc_device_decl sc_dev; -+} icpDev; -+ -+static device_method_t icp_methods = { -+ /* crypto device methods */ -+ DEVMETHOD(cryptodev_newsession, icp_ocfDrvNewSession), -+ DEVMETHOD(cryptodev_freesession, icp_ocfDrvFreeLACSession), -+ DEVMETHOD(cryptodev_process, icp_ocfDrvSymProcess), -+ DEVMETHOD(cryptodev_kprocess, icp_ocfDrvPkeProcess), -+}; -+ -+module_param(num_dereg_retries, int, S_IRUGO); -+module_param(dereg_retry_delay_in_jiffies, int, S_IRUGO); -+module_param(max_sessions, int, S_IRUGO); -+ -+MODULE_PARM_DESC(num_dereg_retries, -+ "Number of times to retry LAC Sym Session Deregistration. " -+ "Default 10, Max 100"); -+MODULE_PARM_DESC(dereg_retry_delay_in_jiffies, "Delay in jiffies " -+ "(added to a schedule() function call) before a LAC Sym " -+ "Session Dereg is retried. Default 10"); -+MODULE_PARM_DESC(max_sessions, "This sets the maximum number of sessions " -+ "between OCF and this driver. If this value is set to zero, " -+ "max session count checking is disabled. Default is zero(0)"); -+ -+/* Name : icp_ocfDrvInit -+ * -+ * Description : This function will register all the symmetric and asymmetric -+ * functionality that will be accelerated by the hardware. It will also -+ * get a unique driver ID from the OCF and initialise all slab caches -+ */ -+static int __init icp_ocfDrvInit(void) -+{ -+ int ocfStatus = 0; -+ -+ IPRINTK("=== %s ver %d.%d.%d ===\n", ICP_OCF_COMP_NAME, -+ ICP_OCF_VER_MAIN, ICP_OCF_VER_MJR, ICP_OCF_VER_MNR); -+ -+ if (MAX_DEREG_RETRIES < num_dereg_retries) { -+ EPRINTK("Session deregistration retry count set to greater " -+ "than %d", MAX_DEREG_RETRIES); -+ return -1; -+ } -+ -+ /* Initialize and Start the Cryptographic component */ -+ if (CPA_STATUS_SUCCESS != -+ cpaCyStartInstance(CPA_INSTANCE_HANDLE_SINGLE)) { -+ EPRINTK("Failed to initialize and start the instance " -+ "of the Cryptographic component.\n"); -+ return -1; -+ } -+ -+ /* Set the default size of BufferList to allocate */ -+ memset(&defBuffListInfo, 0, sizeof(struct icp_drvBuffListInfo)); -+ if (ICP_OCF_DRV_STATUS_SUCCESS != -+ icp_ocfDrvBufferListMemInfo(ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS, -+ &defBuffListInfo)) { -+ EPRINTK("Failed to get bufferlist memory info.\n"); -+ return -1; -+ } -+ -+ /*Register OCF Tolapai Driver with OCF */ -+ memset(&icpDev, 0, sizeof(icpDev)); -+ softc_device_init(&icpDev, "icp", 0, icp_methods); -+ -+ icp_ocfDrvDriverId = crypto_get_driverid(softc_get_device(&icpDev), -+ CRYPTOCAP_F_HARDWARE); -+ -+ if (icp_ocfDrvDriverId < 0) { -+ EPRINTK("%s : ICP driver failed to register with OCF!\n", -+ __FUNCTION__); -+ return -ENODEV; -+ } -+ -+ /*Create all the slab caches used by the OCF Tolapai Driver */ -+ drvSessionData_zone = -+ ICP_CACHE_CREATE("ICP Session Data", struct icp_drvSessionData); -+ ICP_CACHE_NULL_CHECK(drvSessionData_zone); -+ -+ /* -+ * Allocation of the OpData includes the allocation space for meta data. -+ * The memory after the opData structure is reserved for this meta data. -+ */ -+ drvOpData_zone = -+ kmem_cache_create("ICP Op Data", sizeof(struct icp_drvOpData) + -+ defBuffListInfo.metaSize ,0, SLAB_HWCACHE_ALIGN, NULL, NULL); -+ -+ -+ ICP_CACHE_NULL_CHECK(drvOpData_zone); -+ -+ drvDH_zone = ICP_CACHE_CREATE("ICP DH data", CpaCyDhPhase1KeyGenOpData); -+ ICP_CACHE_NULL_CHECK(drvDH_zone); -+ -+ drvLnModExp_zone = -+ ICP_CACHE_CREATE("ICP ModExp data", CpaCyLnModExpOpData); -+ ICP_CACHE_NULL_CHECK(drvLnModExp_zone); -+ -+ drvRSADecrypt_zone = -+ ICP_CACHE_CREATE("ICP RSA decrypt data", CpaCyRsaDecryptOpData); -+ ICP_CACHE_NULL_CHECK(drvRSADecrypt_zone); -+ -+ drvRSAPrivateKey_zone = -+ ICP_CACHE_CREATE("ICP RSA private key data", CpaCyRsaPrivateKey); -+ ICP_CACHE_NULL_CHECK(drvRSAPrivateKey_zone); -+ -+ drvDSARSSign_zone = -+ ICP_CACHE_CREATE("ICP DSA Sign", CpaCyDsaRSSignOpData); -+ ICP_CACHE_NULL_CHECK(drvDSARSSign_zone); -+ -+ /*too awkward to use a macro here */ -+ drvDSARSSignKValue_zone = -+ kmem_cache_create("ICP DSA Sign Rand Val", -+ DSA_RS_SIGN_PRIMEQ_SIZE_IN_BYTES, 0, -+ SLAB_HWCACHE_ALIGN, NULL, NULL); -+ ICP_CACHE_NULL_CHECK(drvDSARSSignKValue_zone); -+ -+ drvDSAVerify_zone = -+ ICP_CACHE_CREATE("ICP DSA Verify", CpaCyDsaVerifyOpData); -+ ICP_CACHE_NULL_CHECK(drvDSAVerify_zone); -+ -+ drvFlatBuffer_zone = -+ ICP_CACHE_CREATE("ICP Flat Buffers", CpaFlatBuffer); -+ ICP_CACHE_NULL_CHECK(drvFlatBuffer_zone); -+ -+ /* Register the ICP symmetric crypto support. */ -+ ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_NULL_CBC); -+ ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_DES_CBC); -+ ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_3DES_CBC); -+ ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_AES_CBC); -+ ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_ARC4); -+ ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_MD5); -+ ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_MD5_HMAC); -+ ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_SHA1); -+ ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_SHA1_HMAC); -+ ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_SHA2_256); -+ ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_SHA2_256_HMAC); -+ ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_SHA2_384); -+ ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_SHA2_384_HMAC); -+ ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_SHA2_512); -+ ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_SHA2_512_HMAC); -+ -+ /* Register the ICP asymmetric algorithm support */ -+ ICP_REGISTER_ASYM_FUNCTIONALITY_WITH_OCF(CRK_DH_COMPUTE_KEY); -+ ICP_REGISTER_ASYM_FUNCTIONALITY_WITH_OCF(CRK_MOD_EXP); -+ ICP_REGISTER_ASYM_FUNCTIONALITY_WITH_OCF(CRK_MOD_EXP_CRT); -+ ICP_REGISTER_ASYM_FUNCTIONALITY_WITH_OCF(CRK_DSA_SIGN); -+ ICP_REGISTER_ASYM_FUNCTIONALITY_WITH_OCF(CRK_DSA_VERIFY); -+ -+ /* Register the ICP random number generator support */ -+ if (OCF_REGISTRATION_STATUS_SUCCESS == -+ crypto_rregister(icp_ocfDrvDriverId, icp_ocfDrvReadRandom, NULL)) { -+ ocfStatus++; -+ } -+ -+ if (OCF_ZERO_FUNCTIONALITY_REGISTERED == ocfStatus) { -+ DPRINTK("%s: Failed to register any device capabilities\n", -+ __FUNCTION__); -+ icp_ocfDrvFreeCaches(); -+ icp_ocfDrvDriverId = INVALID_DRIVER_ID; -+ return -ECANCELED; -+ } -+ -+ DPRINTK("%s: Registered %d of %d device capabilities\n", -+ __FUNCTION__, ocfStatus, NUM_SUPPORTED_CAPABILITIES); -+ -+/*Session data linked list used during module exit*/ -+ INIT_LIST_HEAD(&icp_ocfDrvGlobalSymListHead); -+ INIT_LIST_HEAD(&icp_ocfDrvGlobalSymListHead_FreeMemList); -+ -+ icp_ocfDrvFreeLacSessionWorkQ = -+ create_singlethread_workqueue("ocfLacDeregWorkQueue"); -+ -+ return 0; -+} -+ -+/* Name : icp_ocfDrvExit -+ * -+ * Description : This function will deregister all the symmetric sessions -+ * registered with the LAC component. It will also deregister all symmetric -+ * and asymmetric functionality that can be accelerated by the hardware via OCF -+ * and random number generation if it is enabled. -+ */ -+static void icp_ocfDrvExit(void) -+{ -+ CpaStatus lacStatus = CPA_STATUS_SUCCESS; -+ struct icp_drvSessionData *sessionData = NULL; -+ struct icp_drvSessionData *tempSessionData = NULL; -+ int i, remaining_delay_time_in_jiffies = 0; -+ /* There is a possibility of a process or new session command being */ -+ /* sent before this variable is incremented. The aim of this variable */ -+ /* is to stop a loop of calls creating a deadlock situation which */ -+ /* would prevent the driver from exiting. */ -+ -+ atomic_inc(&icp_ocfDrvIsExiting); -+ -+ /*Existing sessions will be routed to another driver after these calls */ -+ crypto_unregister_all(icp_ocfDrvDriverId); -+ crypto_runregister_all(icp_ocfDrvDriverId); -+ -+ /*If any sessions are waiting to be deregistered, do that. This also -+ flushes the work queue */ -+ destroy_workqueue(icp_ocfDrvFreeLacSessionWorkQ); -+ -+ /*ENTER CRITICAL SECTION */ -+ spin_lock_bh(&icp_ocfDrvSymSessInfoListSpinlock); -+ list_for_each_entry_safe(tempSessionData, sessionData, -+ &icp_ocfDrvGlobalSymListHead, listNode) { -+ for (i = 0; i < num_dereg_retries; i++) { -+ /*No harm if bad input - LAC will handle error cases */ -+ if (ICP_SESSION_RUNNING == tempSessionData->inUse) { -+ lacStatus = -+ cpaCySymRemoveSession -+ (CPA_INSTANCE_HANDLE_SINGLE, -+ tempSessionData->sessHandle); -+ if (CPA_STATUS_SUCCESS == lacStatus) { -+ /* Succesfully deregistered */ -+ break; -+ } else if (CPA_STATUS_RETRY != lacStatus) { -+ atomic_inc -+ (&lac_session_failed_dereg_count); -+ break; -+ } -+ -+ /*schedule_timout returns the time left for completion if -+ * this task is set to TASK_INTERRUPTIBLE */ -+ remaining_delay_time_in_jiffies = -+ dereg_retry_delay_in_jiffies; -+ while (0 > remaining_delay_time_in_jiffies) { -+ remaining_delay_time_in_jiffies = -+ schedule_timeout -+ (remaining_delay_time_in_jiffies); -+ } -+ -+ DPRINTK -+ ("%s(): Retry %d to deregistrate the session\n", -+ __FUNCTION__, i); -+ } -+ } -+ -+ /*remove from current list */ -+ list_del(&(tempSessionData->listNode)); -+ /*add to free mem linked list */ -+ list_add(&(tempSessionData->listNode), -+ &icp_ocfDrvGlobalSymListHead_FreeMemList); -+ -+ } -+ -+ /*EXIT CRITICAL SECTION */ -+ spin_unlock_bh(&icp_ocfDrvSymSessInfoListSpinlock); -+ -+ /*set back to initial values */ -+ sessionData = NULL; -+ /*still have a reference in our list! */ -+ tempSessionData = NULL; -+ /*free memory */ -+ list_for_each_entry_safe(tempSessionData, sessionData, -+ &icp_ocfDrvGlobalSymListHead_FreeMemList, -+ listNode) { -+ -+ list_del(&(tempSessionData->listNode)); -+ /* Free allocated CpaCySymSessionCtx */ -+ if (NULL != tempSessionData->sessHandle) { -+ kfree(tempSessionData->sessHandle); -+ } -+ memset(tempSessionData, 0, sizeof(struct icp_drvSessionData)); -+ kmem_cache_free(drvSessionData_zone, tempSessionData); -+ } -+ -+ if (0 != atomic_read(&lac_session_failed_dereg_count)) { -+ DPRINTK("%s(): %d LAC sessions were not deregistered " -+ "correctly. This is not a clean exit! \n", -+ __FUNCTION__, -+ atomic_read(&lac_session_failed_dereg_count)); -+ } -+ -+ icp_ocfDrvFreeCaches(); -+ icp_ocfDrvDriverId = INVALID_DRIVER_ID; -+ -+ /* Shutdown the Cryptographic component */ -+ lacStatus = cpaCyStopInstance(CPA_INSTANCE_HANDLE_SINGLE); -+ if (CPA_STATUS_SUCCESS != lacStatus) { -+ DPRINTK("%s(): Failed to stop instance of the " -+ "Cryptographic component.(status == %d)\n", -+ __FUNCTION__, lacStatus); -+ } -+ -+} -+ -+/* Name : icp_ocfDrvFreeCaches -+ * -+ * Description : This function deregisters all slab caches -+ */ -+static void icp_ocfDrvFreeCaches(void) -+{ -+ if (atomic_read(&icp_ocfDrvIsExiting) != CPA_TRUE) { -+ atomic_set(&icp_ocfDrvIsExiting, 1); -+ } -+ -+ /*Sym Zones */ -+ ICP_CACHE_DESTROY(drvSessionData_zone); -+ ICP_CACHE_DESTROY(drvOpData_zone); -+ -+ /*Asym zones */ -+ ICP_CACHE_DESTROY(drvDH_zone); -+ ICP_CACHE_DESTROY(drvLnModExp_zone); -+ ICP_CACHE_DESTROY(drvRSADecrypt_zone); -+ ICP_CACHE_DESTROY(drvRSAPrivateKey_zone); -+ ICP_CACHE_DESTROY(drvDSARSSignKValue_zone); -+ ICP_CACHE_DESTROY(drvDSARSSign_zone); -+ ICP_CACHE_DESTROY(drvDSAVerify_zone); -+ -+ /*FlatBuffer and BufferList Zones */ -+ ICP_CACHE_DESTROY(drvFlatBuffer_zone); -+ -+} -+ -+/* Name : icp_ocfDrvDeregRetry -+ * -+ * Description : This function will try to farm the session deregistration -+ * off to a work queue. If it fails, nothing more can be done and it -+ * returns an error -+ */ -+ -+int icp_ocfDrvDeregRetry(CpaCySymSessionCtx sessionToDeregister) -+{ -+ struct icp_ocfDrvFreeLacSession *workstore = NULL; -+ -+ DPRINTK("%s(): Retry - Deregistering session (%p)\n", -+ __FUNCTION__, sessionToDeregister); -+ -+ /*make sure the session is not available to be allocated during this -+ process */ -+ atomic_inc(&lac_session_failed_dereg_count); -+ -+ /*Farm off to work queue */ -+ workstore = -+ kmalloc(sizeof(struct icp_ocfDrvFreeLacSession), GFP_ATOMIC); -+ if (NULL == workstore) { -+ DPRINTK("%s(): unable to free session - no memory available " -+ "for work queue\n", __FUNCTION__); -+ return ENOMEM; -+ } -+ -+ workstore->sessionToDeregister = sessionToDeregister; -+ -+ INIT_WORK(&(workstore->work), icp_ocfDrvDeferedFreeLacSessionProcess, -+ workstore); -+ queue_work(icp_ocfDrvFreeLacSessionWorkQ, &(workstore->work)); -+ -+ return ICP_OCF_DRV_STATUS_SUCCESS; -+ -+} -+ -+/* Name : icp_ocfDrvDeferedFreeLacSessionProcess -+ * -+ * Description : This function will retry (module input parameter) -+ * 'num_dereg_retries' times to deregister any symmetric session that recieves a -+ * CPA_STATUS_RETRY message from the LAC component. This function is run in -+ * Thread context because it is called from a worker thread -+ */ -+static void icp_ocfDrvDeferedFreeLacSessionProcess(void *arg) -+{ -+ struct icp_ocfDrvFreeLacSession *workstore = NULL; -+ CpaCySymSessionCtx sessionToDeregister = NULL; -+ int i = 0; -+ int remaining_delay_time_in_jiffies = 0; -+ CpaStatus lacStatus = CPA_STATUS_SUCCESS; -+ -+ workstore = (struct icp_ocfDrvFreeLacSession *)arg; -+ if (NULL == workstore) { -+ DPRINTK("%s() function called with null parameter \n", -+ __FUNCTION__); -+ return; -+ } -+ -+ sessionToDeregister = workstore->sessionToDeregister; -+ kfree(workstore); -+ -+ /*if exiting, give deregistration one more blast only */ -+ if (atomic_read(&icp_ocfDrvIsExiting) == CPA_TRUE) { -+ lacStatus = cpaCySymRemoveSession(CPA_INSTANCE_HANDLE_SINGLE, -+ sessionToDeregister); -+ -+ if (lacStatus != CPA_STATUS_SUCCESS) { -+ DPRINTK("%s() Failed to Dereg LAC session %p " -+ "during module exit\n", __FUNCTION__, -+ sessionToDeregister); -+ return; -+ } -+ -+ atomic_dec(&lac_session_failed_dereg_count); -+ return; -+ } -+ -+ for (i = 0; i <= num_dereg_retries; i++) { -+ lacStatus = cpaCySymRemoveSession(CPA_INSTANCE_HANDLE_SINGLE, -+ sessionToDeregister); -+ -+ if (lacStatus == CPA_STATUS_SUCCESS) { -+ atomic_dec(&lac_session_failed_dereg_count); -+ return; -+ } -+ if (lacStatus != CPA_STATUS_RETRY) { -+ DPRINTK("%s() Failed to deregister session - lacStatus " -+ " = %d", __FUNCTION__, lacStatus); -+ break; -+ } -+ -+ /*schedule_timout returns the time left for completion if this -+ task is set to TASK_INTERRUPTIBLE */ -+ remaining_delay_time_in_jiffies = dereg_retry_delay_in_jiffies; -+ while (0 > remaining_delay_time_in_jiffies) { -+ remaining_delay_time_in_jiffies = -+ schedule_timeout(remaining_delay_time_in_jiffies); -+ } -+ -+ } -+ -+ DPRINTK("%s(): Unable to deregister session\n", __FUNCTION__); -+ DPRINTK("%s(): Number of unavailable LAC sessions = %d\n", __FUNCTION__, -+ atomic_read(&lac_session_failed_dereg_count)); -+} -+ -+/* Name : icp_ocfDrvPtrAndLenToFlatBuffer -+ * -+ * Description : This function converts a "pointer and length" buffer -+ * structure to Fredericksburg Flat Buffer (CpaFlatBuffer) format. -+ * -+ * This function assumes that the data passed in are valid. -+ */ -+inline void -+icp_ocfDrvPtrAndLenToFlatBuffer(void *pData, uint32_t len, -+ CpaFlatBuffer * pFlatBuffer) -+{ -+ pFlatBuffer->pData = pData; -+ pFlatBuffer->dataLenInBytes = len; -+} -+ -+/* Name : icp_ocfDrvSingleSkBuffToFlatBuffer -+ * -+ * Description : This function converts a single socket buffer (sk_buff) -+ * structure to a Fredericksburg Flat Buffer (CpaFlatBuffer) format. -+ * -+ * This function assumes that the data passed in are valid. -+ */ -+static inline void -+icp_ocfDrvSingleSkBuffToFlatBuffer(struct sk_buff *pSkb, -+ CpaFlatBuffer * pFlatBuffer) -+{ -+ pFlatBuffer->pData = pSkb->data; -+ pFlatBuffer->dataLenInBytes = skb_headlen(pSkb); -+} -+ -+/* Name : icp_ocfDrvSkBuffToBufferList -+ * -+ * Description : This function converts a socket buffer (sk_buff) structure to -+ * Fredericksburg Scatter/Gather (CpaBufferList) buffer format. -+ * -+ * This function assumes that the bufferlist has been allocated with the correct -+ * number of buffer arrays. -+ * -+ */ -+inline int -+icp_ocfDrvSkBuffToBufferList(struct sk_buff *pSkb, CpaBufferList * bufferList) -+{ -+ CpaFlatBuffer *curFlatBuffer = NULL; -+ char *skbuffPageAddr = NULL; -+ struct sk_buff *pCurFrag = NULL; -+ struct skb_shared_info *pShInfo = NULL; -+ uint32_t page_offset = 0, i = 0; -+ -+ DPRINTK("%s(): Entry Point\n", __FUNCTION__); -+ -+ /* -+ * In all cases, the first skb needs to be translated to FlatBuffer. -+ * Perform a buffer translation for the first skbuff -+ */ -+ curFlatBuffer = bufferList->pBuffers; -+ icp_ocfDrvSingleSkBuffToFlatBuffer(pSkb, curFlatBuffer); -+ -+ /* Set the userData to point to the original sk_buff */ -+ bufferList->pUserData = (void *)pSkb; -+ -+ /* We now know we'll have at least one element in the SGL */ -+ bufferList->numBuffers = 1; -+ -+ if (0 == skb_is_nonlinear(pSkb)) { -+ /* Is a linear buffer - therefore it's a single skbuff */ -+ DPRINTK("%s(): Exit Point\n", __FUNCTION__); -+ return ICP_OCF_DRV_STATUS_SUCCESS; -+ } -+ -+ curFlatBuffer++; -+ pShInfo = skb_shinfo(pSkb); -+ if (pShInfo->frag_list != NULL && pShInfo->nr_frags != 0) { -+ EPRINTK("%s():" -+ "Translation for a combination of frag_list " -+ "and frags[] array not supported!\n", __FUNCTION__); -+ return ICP_OCF_DRV_STATUS_FAIL; -+ } else if (pShInfo->frag_list != NULL) { -+ /* -+ * Non linear skbuff supported through frag_list -+ * Perform translation for each fragment (sk_buff) -+ * in the frag_list of the first sk_buff. -+ */ -+ for (pCurFrag = pShInfo->frag_list; -+ pCurFrag != NULL; pCurFrag = pCurFrag->next) { -+ icp_ocfDrvSingleSkBuffToFlatBuffer(pCurFrag, -+ curFlatBuffer); -+ curFlatBuffer++; -+ bufferList->numBuffers++; -+ } -+ } else if (pShInfo->nr_frags != 0) { -+ /* -+ * Perform translation for each fragment in frags array -+ * and add to the BufferList -+ */ -+ for (i = 0; i < pShInfo->nr_frags; i++) { -+ /* Get the page address and offset of this frag */ -+ skbuffPageAddr = (char *)pShInfo->frags[i].page; -+ page_offset = pShInfo->frags[i].page_offset; -+ -+ /* Convert a pointer and length to a flat buffer */ -+ icp_ocfDrvPtrAndLenToFlatBuffer(skbuffPageAddr + -+ page_offset, -+ pShInfo->frags[i].size, -+ curFlatBuffer); -+ curFlatBuffer++; -+ bufferList->numBuffers++; -+ } -+ } else { -+ EPRINTK("%s():" "Could not recognize skbuff fragments!\n", -+ __FUNCTION__); -+ return ICP_OCF_DRV_STATUS_FAIL; -+ } -+ -+ DPRINTK("%s(): Exit Point\n", __FUNCTION__); -+ return ICP_OCF_DRV_STATUS_SUCCESS; -+} -+ -+/* Name : icp_ocfDrvBufferListToSkBuff -+ * -+ * Description : This function converts a Fredericksburg Scatter/Gather -+ * (CpaBufferList) buffer format to socket buffer structure. -+ */ -+inline int -+icp_ocfDrvBufferListToSkBuff(CpaBufferList * bufferList, struct sk_buff **skb) -+{ -+ DPRINTK("%s(): Entry Point\n", __FUNCTION__); -+ -+ /* Retrieve the orignal skbuff */ -+ *skb = (struct sk_buff *)bufferList->pUserData; -+ if (NULL == *skb) { -+ EPRINTK("%s():" -+ "Error on converting from a BufferList. " -+ "The BufferList does not contain an sk_buff.\n", -+ __FUNCTION__); -+ return ICP_OCF_DRV_STATUS_FAIL; -+ } -+ DPRINTK("%s(): Exit Point\n", __FUNCTION__); -+ return ICP_OCF_DRV_STATUS_SUCCESS; -+} -+ -+/* Name : icp_ocfDrvPtrAndLenToBufferList -+ * -+ * Description : This function converts a "pointer and length" buffer -+ * structure to Fredericksburg Scatter/Gather Buffer (CpaBufferList) format. -+ * -+ * This function assumes that the data passed in are valid. -+ */ -+inline void -+icp_ocfDrvPtrAndLenToBufferList(void *pDataIn, uint32_t length, -+ CpaBufferList * pBufferList) -+{ -+ pBufferList->numBuffers = 1; -+ pBufferList->pBuffers->pData = pDataIn; -+ pBufferList->pBuffers->dataLenInBytes = length; -+} -+ -+/* Name : icp_ocfDrvBufferListToPtrAndLen -+ * -+ * Description : This function converts Fredericksburg Scatter/Gather Buffer -+ * (CpaBufferList) format to a "pointer and length" buffer structure. -+ * -+ * This function assumes that the data passed in are valid. -+ */ -+inline void -+icp_ocfDrvBufferListToPtrAndLen(CpaBufferList * pBufferList, -+ void **ppDataOut, uint32_t * pLength) -+{ -+ *ppDataOut = pBufferList->pBuffers->pData; -+ *pLength = pBufferList->pBuffers->dataLenInBytes; -+} -+ -+/* Name : icp_ocfDrvBufferListMemInfo -+ * -+ * Description : This function will set the number of flat buffers in -+ * bufferlist, the size of memory to allocate for the pPrivateMetaData -+ * member of the CpaBufferList. -+ */ -+int -+icp_ocfDrvBufferListMemInfo(uint16_t numBuffers, -+ struct icp_drvBuffListInfo *buffListInfo) -+{ -+ buffListInfo->numBuffers = numBuffers; -+ -+ if (CPA_STATUS_SUCCESS != -+ cpaCyBufferListGetMetaSize(CPA_INSTANCE_HANDLE_SINGLE, -+ buffListInfo->numBuffers, -+ &(buffListInfo->metaSize))) { -+ EPRINTK("%s() Failed to get buffer list meta size.\n", -+ __FUNCTION__); -+ return ICP_OCF_DRV_STATUS_FAIL; -+ } -+ -+ return ICP_OCF_DRV_STATUS_SUCCESS; -+} -+ -+/* Name : icp_ocfDrvGetSkBuffFrags -+ * -+ * Description : This function will determine the number of -+ * fragments in a socket buffer(sk_buff). -+ */ -+inline uint16_t icp_ocfDrvGetSkBuffFrags(struct sk_buff * pSkb) -+{ -+ uint16_t numFrags = 0; -+ struct sk_buff *pCurFrag = NULL; -+ struct skb_shared_info *pShInfo = NULL; -+ -+ if (NULL == pSkb) -+ return 0; -+ -+ numFrags = 1; -+ if (0 == skb_is_nonlinear(pSkb)) { -+ /* Linear buffer - it's a single skbuff */ -+ return numFrags; -+ } -+ -+ pShInfo = skb_shinfo(pSkb); -+ if (NULL != pShInfo->frag_list && 0 != pShInfo->nr_frags) { -+ EPRINTK("%s(): Combination of frag_list " -+ "and frags[] array not supported!\n", __FUNCTION__); -+ return 0; -+ } else if (0 != pShInfo->nr_frags) { -+ numFrags += pShInfo->nr_frags; -+ return numFrags; -+ } else if (NULL != pShInfo->frag_list) { -+ for (pCurFrag = pShInfo->frag_list; -+ pCurFrag != NULL; pCurFrag = pCurFrag->next) { -+ numFrags++; -+ } -+ return numFrags; -+ } else { -+ return 0; -+ } -+} -+ -+/* Name : icp_ocfDrvFreeFlatBuffer -+ * -+ * Description : This function will deallocate flat buffer. -+ */ -+inline void icp_ocfDrvFreeFlatBuffer(CpaFlatBuffer * pFlatBuffer) -+{ -+ if (pFlatBuffer != NULL) { -+ memset(pFlatBuffer, 0, sizeof(CpaFlatBuffer)); -+ kmem_cache_free(drvFlatBuffer_zone, pFlatBuffer); -+ } -+} -+ -+/* Name : icp_ocfDrvAllocMetaData -+ * -+ * Description : This function will allocate memory for the -+ * pPrivateMetaData member of CpaBufferList. -+ */ -+inline int -+icp_ocfDrvAllocMetaData(CpaBufferList * pBufferList, -+ const struct icp_drvOpData *pOpData) -+{ -+ Cpa32U metaSize = 0; -+ -+ if (pBufferList->numBuffers <= ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS){ -+ void *pOpDataStartAddr = (void *)pOpData; -+ -+ if (0 == defBuffListInfo.metaSize) { -+ pBufferList->pPrivateMetaData = NULL; -+ return ICP_OCF_DRV_STATUS_SUCCESS; -+ } -+ /* -+ * The meta data allocation has been included as part of the -+ * op data. It has been pre-allocated in memory just after the -+ * icp_drvOpData structure. -+ */ -+ pBufferList->pPrivateMetaData = pOpDataStartAddr + -+ sizeof(struct icp_drvOpData); -+ } else { -+ if (CPA_STATUS_SUCCESS != -+ cpaCyBufferListGetMetaSize(CPA_INSTANCE_HANDLE_SINGLE, -+ pBufferList->numBuffers, -+ &metaSize)) { -+ EPRINTK("%s() Failed to get buffer list meta size.\n", -+ __FUNCTION__); -+ return ICP_OCF_DRV_STATUS_FAIL; -+ } -+ -+ if (0 == metaSize) { -+ pBufferList->pPrivateMetaData = NULL; -+ return ICP_OCF_DRV_STATUS_SUCCESS; -+ } -+ -+ pBufferList->pPrivateMetaData = kmalloc(metaSize, GFP_ATOMIC); -+ } -+ if (NULL == pBufferList->pPrivateMetaData) { -+ EPRINTK("%s() Failed to allocate pPrivateMetaData.\n", -+ __FUNCTION__); -+ return ICP_OCF_DRV_STATUS_FAIL; -+ } -+ -+ return ICP_OCF_DRV_STATUS_SUCCESS; -+} -+ -+/* Name : icp_ocfDrvFreeMetaData -+ * -+ * Description : This function will deallocate pPrivateMetaData memory. -+ */ -+inline void icp_ocfDrvFreeMetaData(CpaBufferList * pBufferList) -+{ -+ if (NULL == pBufferList->pPrivateMetaData) { -+ return; -+ } -+ -+ /* -+ * Only free the meta data if the BufferList has more than -+ * ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS number of buffers. -+ * Otherwise, the meta data shall be freed when the icp_drvOpData is -+ * freed. -+ */ -+ if (ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS < pBufferList->numBuffers){ -+ kfree(pBufferList->pPrivateMetaData); -+ } -+} -+ -+module_init(icp_ocfDrvInit); -+module_exit(icp_ocfDrvExit); -+MODULE_LICENSE("Dual BSD/GPL"); -+MODULE_AUTHOR("Intel"); -+MODULE_DESCRIPTION("OCF Driver for Intel Quick Assist crypto acceleration"); -diff -Nur linux-2.6.30.orig/crypto/ocf/ep80579/icp_ocf.h linux-2.6.30/crypto/ocf/ep80579/icp_ocf.h ---- linux-2.6.30.orig/crypto/ocf/ep80579/icp_ocf.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/ep80579/icp_ocf.h 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,363 @@ -+/*************************************************************************** -+ * -+ * This file is provided under a dual BSD/GPLv2 license. When using or -+ * redistributing this file, you may do so under either license. -+ * -+ * GPL LICENSE SUMMARY -+ * -+ * Copyright(c) 2007,2008 Intel Corporation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of version 2 of the GNU General Public License as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. -+ * The full GNU General Public License is included in this distribution -+ * in the file called LICENSE.GPL. -+ * -+ * Contact Information: -+ * Intel Corporation -+ * -+ * BSD LICENSE -+ * -+ * Copyright(c) 2007,2008 Intel Corporation. All rights reserved. -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * -+ * * Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * * Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in -+ * the documentation and/or other materials provided with the -+ * distribution. -+ * * Neither the name of Intel Corporation nor the names of its -+ * contributors may be used to endorse or promote products derived -+ * from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * -+ * version: Security.L.1.0.130 -+ * -+ ***************************************************************************/ -+ -+/* -+ * OCF drv driver header file for the Intel ICP processor. -+ */ -+ -+#ifndef ICP_OCF_H -+#define ICP_OCF_H -+ -+#include <linux/crypto.h> -+#include <linux/delay.h> -+#include <linux/skbuff.h> -+ -+#include "cryptodev.h" -+#include "uio.h" -+ -+#include "cpa.h" -+#include "cpa_cy_im.h" -+#include "cpa_cy_sym.h" -+#include "cpa_cy_rand.h" -+#include "cpa_cy_dh.h" -+#include "cpa_cy_rsa.h" -+#include "cpa_cy_ln.h" -+#include "cpa_cy_common.h" -+#include "cpa_cy_dsa.h" -+ -+#define NUM_BITS_IN_BYTE (8) -+#define NUM_BITS_IN_BYTE_MINUS_ONE (NUM_BITS_IN_BYTE -1) -+#define INVALID_DRIVER_ID (-1) -+#define RETURN_RAND_NUM_GEN_FAILED (-1) -+ -+/*This is define means only one operation can be chained to another -+(resulting in one chain of two operations)*/ -+#define MAX_NUM_OF_CHAINED_OPS (1) -+/*This is the max block cipher initialisation vector*/ -+#define MAX_IV_LEN_IN_BYTES (20) -+/*This is used to check whether the OCF to this driver session limit has -+ been disabled*/ -+#define NO_OCF_TO_DRV_MAX_SESSIONS (0) -+ -+/*OCF values mapped here*/ -+#define ICP_SHA1_DIGEST_SIZE_IN_BYTES (SHA1_HASH_LEN) -+#define ICP_SHA256_DIGEST_SIZE_IN_BYTES (SHA2_256_HASH_LEN) -+#define ICP_SHA384_DIGEST_SIZE_IN_BYTES (SHA2_384_HASH_LEN) -+#define ICP_SHA512_DIGEST_SIZE_IN_BYTES (SHA2_512_HASH_LEN) -+#define ICP_MD5_DIGEST_SIZE_IN_BYTES (MD5_HASH_LEN) -+#define ARC4_COUNTER_LEN (ARC4_BLOCK_LEN) -+ -+#define OCF_REGISTRATION_STATUS_SUCCESS (0) -+#define OCF_ZERO_FUNCTIONALITY_REGISTERED (0) -+#define ICP_OCF_DRV_NO_CRYPTO_PROCESS_ERROR (0) -+#define ICP_OCF_DRV_STATUS_SUCCESS (0) -+#define ICP_OCF_DRV_STATUS_FAIL (1) -+ -+/*Turn on/off debug options*/ -+#define ICP_OCF_PRINT_DEBUG_MESSAGES (0) -+#define ICP_OCF_PRINT_KERN_ALERT (1) -+#define ICP_OCF_PRINT_KERN_ERRS (1) -+ -+/*DSA Prime Q size in bytes (as defined in the standard) */ -+#define DSA_RS_SIGN_PRIMEQ_SIZE_IN_BYTES (20) -+ -+/*MACRO DEFINITIONS*/ -+ -+#define BITS_TO_BYTES(bytes, bits) \ -+ bytes = (bits + NUM_BITS_IN_BYTE_MINUS_ONE) / NUM_BITS_IN_BYTE -+ -+#define ICP_CACHE_CREATE(cache_ID, cache_name) \ -+ kmem_cache_create(cache_ID, sizeof(cache_name),0, \ -+ SLAB_HWCACHE_ALIGN, NULL, NULL); -+ -+#define ICP_CACHE_NULL_CHECK(slab_zone) \ -+{ \ -+ if(NULL == slab_zone){ \ -+ icp_ocfDrvFreeCaches(); \ -+ EPRINTK("%s() line %d: Not enough memory!\n", \ -+ __FUNCTION__, __LINE__); \ -+ return ENOMEM; \ -+ } \ -+} -+ -+#define ICP_CACHE_DESTROY(slab_zone) \ -+{ \ -+ if(NULL != slab_zone){ \ -+ kmem_cache_destroy(slab_zone); \ -+ slab_zone = NULL; \ -+ } \ -+} -+ -+#define ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(alg) \ -+{ \ -+ if(OCF_REGISTRATION_STATUS_SUCCESS == \ -+ crypto_register(icp_ocfDrvDriverId, \ -+ alg, \ -+ 0, \ -+ 0)) { \ -+ ocfStatus++; \ -+ } \ -+} -+ -+#define ICP_REGISTER_ASYM_FUNCTIONALITY_WITH_OCF(alg) \ -+{ \ -+ if(OCF_REGISTRATION_STATUS_SUCCESS == \ -+ crypto_kregister(icp_ocfDrvDriverId, \ -+ alg, \ -+ 0)){ \ -+ ocfStatus++; \ -+ } \ -+} -+ -+#if ICP_OCF_PRINT_DEBUG_MESSAGES == 1 -+#define DPRINTK(args...) \ -+{ \ -+ printk(args); \ -+} -+ -+#else //ICP_OCF_PRINT_DEBUG_MESSAGES == 1 -+ -+#define DPRINTK(args...) -+ -+#endif //ICP_OCF_PRINT_DEBUG_MESSAGES == 1 -+ -+#if ICP_OCF_PRINT_KERN_ALERT == 1 -+#define APRINTK(args...) \ -+{ \ -+ printk(KERN_ALERT args); \ -+} -+ -+#else //ICP_OCF_PRINT_KERN_ALERT == 1 -+ -+#define APRINTK(args...) -+ -+#endif //ICP_OCF_PRINT_KERN_ALERT == 1 -+ -+#if ICP_OCF_PRINT_KERN_ERRS == 1 -+#define EPRINTK(args...) \ -+{ \ -+ printk(KERN_ERR args); \ -+} -+ -+#else //ICP_OCF_PRINT_KERN_ERRS == 1 -+ -+#define EPRINTK(args...) -+ -+#endif //ICP_OCF_PRINT_KERN_ERRS == 1 -+ -+#define IPRINTK(args...) \ -+{ \ -+ printk(KERN_INFO args); \ -+} -+ -+/*END OF MACRO DEFINITIONS*/ -+ -+typedef enum { -+ ICP_OCF_DRV_ALG_CIPHER = 0, -+ ICP_OCF_DRV_ALG_HASH -+} icp_ocf_drv_alg_type_t; -+ -+/* These are all defined in icp_common.c */ -+extern atomic_t lac_session_failed_dereg_count; -+extern atomic_t icp_ocfDrvIsExiting; -+extern atomic_t num_ocf_to_drv_registered_sessions; -+ -+/*These are use inputs used in icp_sym.c and icp_common.c -+ They are instantiated in icp_common.c*/ -+extern int max_sessions; -+ -+extern int32_t icp_ocfDrvDriverId; -+extern struct list_head icp_ocfDrvGlobalSymListHead; -+extern struct list_head icp_ocfDrvGlobalSymListHead_FreeMemList; -+extern struct workqueue_struct *icp_ocfDrvFreeLacSessionWorkQ; -+extern spinlock_t icp_ocfDrvSymSessInfoListSpinlock; -+extern rwlock_t icp_kmem_cache_destroy_alloc_lock; -+ -+/*Slab zones for symettric functionality, instantiated in icp_common.c*/ -+extern struct kmem_cache *drvSessionData_zone; -+extern struct kmem_cache *drvOpData_zone; -+ -+/*Slabs zones for asymettric functionality, instantiated in icp_common.c*/ -+extern struct kmem_cache *drvDH_zone; -+extern struct kmem_cache *drvLnModExp_zone; -+extern struct kmem_cache *drvRSADecrypt_zone; -+extern struct kmem_cache *drvRSAPrivateKey_zone; -+extern struct kmem_cache *drvDSARSSign_zone; -+extern struct kmem_cache *drvDSARSSignKValue_zone; -+extern struct kmem_cache *drvDSAVerify_zone; -+ -+/*Slab zones for flatbuffers and bufferlist*/ -+extern struct kmem_cache *drvFlatBuffer_zone; -+ -+#define ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS (16) -+ -+struct icp_drvBuffListInfo { -+ Cpa16U numBuffers; -+ Cpa32U metaSize; -+ Cpa32U metaOffset; -+ Cpa32U buffListSize; -+}; -+extern struct icp_drvBuffListInfo defBuffListInfo; -+ -+/* -+* This struct is used to keep a reference to the relevant node in the list -+* of sessionData structs, to the buffer type required by OCF and to the OCF -+* provided crp struct that needs to be returned. All this info is needed in -+* the callback function. -+* -+* IV can sometimes be stored in non-contiguous memory (e.g. skbuff -+* linked/frag list, therefore a contiguous memory space for the IV data must be -+* created and passed to LAC -+* -+*/ -+struct icp_drvOpData { -+ CpaCySymOpData lacOpData; -+ uint32_t digestSizeInBytes; -+ struct cryptop *crp; -+ uint8_t bufferType; -+ uint8_t ivData[MAX_IV_LEN_IN_BYTES]; -+ uint16_t numBufferListArray; -+ CpaBufferList srcBuffer; -+ CpaFlatBuffer bufferListArray[ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS]; -+ CpaBoolean verifyResult; -+}; -+/*Values used to derisk chances of performs being called against -+deregistered sessions (for which the slab page has been reclaimed) -+This is not a fix - since page frames are reclaimed from a slab, one cannot -+rely on that memory not being re-used by another app.*/ -+typedef enum { -+ ICP_SESSION_INITIALISED = 0x5C5C5C, -+ ICP_SESSION_RUNNING = 0x005C00, -+ ICP_SESSION_DEREGISTERED = 0xC5C5C5 -+} usage_derisk; -+ -+/* -+This is the OCF<->OCF_DRV session object: -+ -+1.The first member is a listNode. These session objects are added to a linked -+ list in order to make it easier to remove them all at session exit time. -+2.The second member is used to give the session object state and derisk the -+ possibility of OCF batch calls executing against a deregistered session (as -+ described above). -+3.The third member is a LAC<->OCF_DRV session handle (initialised with the first -+ perform request for that session). -+4.The fourth is the LAC session context. All the parameters for this structure -+ are only known when the first perform request for this session occurs. That is -+ why the OCF Tolapai Driver only registers a new LAC session at perform time -+*/ -+struct icp_drvSessionData { -+ struct list_head listNode; -+ usage_derisk inUse; -+ CpaCySymSessionCtx sessHandle; -+ CpaCySymSessionSetupData lacSessCtx; -+}; -+ -+/* This struct is required for deferred session -+ deregistration as a work queue function can -+ only have one argument*/ -+struct icp_ocfDrvFreeLacSession { -+ CpaCySymSessionCtx sessionToDeregister; -+ struct work_struct work; -+}; -+ -+int icp_ocfDrvNewSession(device_t dev, uint32_t * sild, struct cryptoini *cri); -+ -+int icp_ocfDrvFreeLACSession(device_t dev, uint64_t sid); -+ -+int icp_ocfDrvSymProcess(device_t dev, struct cryptop *crp, int hint); -+ -+int icp_ocfDrvPkeProcess(device_t dev, struct cryptkop *krp, int hint); -+ -+int icp_ocfDrvReadRandom(void *arg, uint32_t * buf, int maxwords); -+ -+int icp_ocfDrvDeregRetry(CpaCySymSessionCtx sessionToDeregister); -+ -+int icp_ocfDrvSkBuffToBufferList(struct sk_buff *skb, -+ CpaBufferList * bufferList); -+ -+int icp_ocfDrvBufferListToSkBuff(CpaBufferList * bufferList, -+ struct sk_buff **skb); -+ -+void icp_ocfDrvPtrAndLenToFlatBuffer(void *pData, uint32_t len, -+ CpaFlatBuffer * pFlatBuffer); -+ -+void icp_ocfDrvPtrAndLenToBufferList(void *pDataIn, uint32_t length, -+ CpaBufferList * pBufferList); -+ -+void icp_ocfDrvBufferListToPtrAndLen(CpaBufferList * pBufferList, -+ void **ppDataOut, uint32_t * pLength); -+ -+int icp_ocfDrvBufferListMemInfo(uint16_t numBuffers, -+ struct icp_drvBuffListInfo *buffListInfo); -+ -+uint16_t icp_ocfDrvGetSkBuffFrags(struct sk_buff *pSkb); -+ -+void icp_ocfDrvFreeFlatBuffer(CpaFlatBuffer * pFlatBuffer); -+ -+int icp_ocfDrvAllocMetaData(CpaBufferList * pBufferList, -+ const struct icp_drvOpData *pOpData); -+ -+void icp_ocfDrvFreeMetaData(CpaBufferList * pBufferList); -+ -+#endif -+/* ICP_OCF_H */ -diff -Nur linux-2.6.30.orig/crypto/ocf/ep80579/icp_sym.c linux-2.6.30/crypto/ocf/ep80579/icp_sym.c ---- linux-2.6.30.orig/crypto/ocf/ep80579/icp_sym.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/ep80579/icp_sym.c 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,1382 @@ -+/*************************************************************************** -+ * -+ * This file is provided under a dual BSD/GPLv2 license. When using or -+ * redistributing this file, you may do so under either license. -+ * -+ * GPL LICENSE SUMMARY -+ * -+ * Copyright(c) 2007,2008 Intel Corporation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of version 2 of the GNU General Public License as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. -+ * The full GNU General Public License is included in this distribution -+ * in the file called LICENSE.GPL. -+ * -+ * Contact Information: -+ * Intel Corporation -+ * -+ * BSD LICENSE -+ * -+ * Copyright(c) 2007,2008 Intel Corporation. All rights reserved. -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * -+ * * Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * * Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in -+ * the documentation and/or other materials provided with the -+ * distribution. -+ * * Neither the name of Intel Corporation nor the names of its -+ * contributors may be used to endorse or promote products derived -+ * from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * -+ * version: Security.L.1.0.130 -+ * -+ ***************************************************************************/ -+/* -+ * An OCF module that uses the API for Intel® QuickAssist Technology to do the -+ * cryptography. -+ * -+ * This driver requires the ICP Access Library that is available from Intel in -+ * order to operate. -+ */ -+ -+#include "icp_ocf.h" -+ -+/*This is the call back function for all symmetric cryptographic processes. -+ Its main functionality is to free driver crypto operation structure and to -+ call back to OCF*/ -+static void -+icp_ocfDrvSymCallBack(void *callbackTag, -+ CpaStatus status, -+ const CpaCySymOp operationType, -+ void *pOpData, -+ CpaBufferList * pDstBuffer, CpaBoolean verifyResult); -+ -+/*This function is used to extract crypto processing information from the OCF -+ inputs, so as that it may be passed onto LAC*/ -+static int -+icp_ocfDrvProcessDataSetup(struct icp_drvOpData *drvOpData, -+ struct cryptodesc *crp_desc); -+ -+/*This function checks whether the crp_desc argument pertains to a digest or a -+ cipher operation*/ -+static int icp_ocfDrvAlgCheck(struct cryptodesc *crp_desc); -+ -+/*This function copies all the passed in session context information and stores -+ it in a LAC context structure*/ -+static int -+icp_ocfDrvAlgorithmSetup(struct cryptoini *cri, -+ CpaCySymSessionSetupData * lacSessCtx); -+ -+/*This top level function is used to find a pointer to where a digest is -+ stored/needs to be inserted. */ -+static uint8_t *icp_ocfDrvDigestPointerFind(struct icp_drvOpData *drvOpData, -+ struct cryptodesc *crp_desc); -+ -+/*This function is called when a digest pointer has to be found within a -+ SKBUFF.*/ -+static inline uint8_t *icp_ocfDrvSkbuffDigestPointerFind(struct icp_drvOpData -+ *drvOpData, -+ int offsetInBytes, -+ uint32_t -+ digestSizeInBytes); -+ -+/*The following two functions are called if the SKBUFF digest pointer is not -+ positioned in the linear portion of the buffer (i.e. it is in a linked SKBUFF -+ or page fragment).*/ -+/*This function takes care of the page fragment case.*/ -+static inline uint8_t *icp_ocfDrvDigestSkbNRFragsCheck(struct sk_buff *skb, -+ struct skb_shared_info -+ *skb_shared, -+ int offsetInBytes, -+ uint32_t -+ digestSizeInBytes); -+ -+/*This function takes care of the linked list case.*/ -+static inline uint8_t *icp_ocfDrvDigestSkbFragListCheck(struct sk_buff *skb, -+ struct skb_shared_info -+ *skb_shared, -+ int offsetInBytes, -+ uint32_t -+ digestSizeInBytes); -+ -+/*This function is used to free an OCF->OCF_DRV session object*/ -+static void icp_ocfDrvFreeOCFSession(struct icp_drvSessionData *sessionData); -+ -+/*max IOV buffs supported in a UIO structure*/ -+#define NUM_IOV_SUPPORTED (1) -+ -+/* Name : icp_ocfDrvSymCallBack -+ * -+ * Description : When this function returns it signifies that the LAC -+ * component has completed the relevant symmetric operation. -+ * -+ * Notes : The callbackTag is a pointer to an icp_drvOpData. This memory -+ * object was passed to LAC for the cryptographic processing and contains all -+ * the relevant information for cleaning up buffer handles etc. so that the -+ * OCF Tolapai Driver portion of this crypto operation can be fully completed. -+ */ -+static void -+icp_ocfDrvSymCallBack(void *callbackTag, -+ CpaStatus status, -+ const CpaCySymOp operationType, -+ void *pOpData, -+ CpaBufferList * pDstBuffer, CpaBoolean verifyResult) -+{ -+ struct cryptop *crp = NULL; -+ struct icp_drvOpData *temp_drvOpData = -+ (struct icp_drvOpData *)callbackTag; -+ uint64_t *tempBasePtr = NULL; -+ uint32_t tempLen = 0; -+ -+ if (NULL == temp_drvOpData) { -+ DPRINTK("%s(): The callback from the LAC component" -+ " has failed due to Null userOpaque data" -+ "(status == %d).\n", __FUNCTION__, status); -+ DPRINTK("%s(): Unable to call OCF back! \n", __FUNCTION__); -+ return; -+ } -+ -+ crp = temp_drvOpData->crp; -+ crp->crp_etype = ICP_OCF_DRV_NO_CRYPTO_PROCESS_ERROR; -+ -+ if (NULL == pOpData) { -+ DPRINTK("%s(): The callback from the LAC component" -+ " has failed due to Null Symmetric Op data" -+ "(status == %d).\n", __FUNCTION__, status); -+ crp->crp_etype = ECANCELED; -+ crypto_done(crp); -+ return; -+ } -+ -+ if (NULL == pDstBuffer) { -+ DPRINTK("%s(): The callback from the LAC component" -+ " has failed due to Null Dst Bufferlist data" -+ "(status == %d).\n", __FUNCTION__, status); -+ crp->crp_etype = ECANCELED; -+ crypto_done(crp); -+ return; -+ } -+ -+ if (CPA_STATUS_SUCCESS == status) { -+ -+ if (temp_drvOpData->bufferType == CRYPTO_F_SKBUF) { -+ if (ICP_OCF_DRV_STATUS_SUCCESS != -+ icp_ocfDrvBufferListToSkBuff(pDstBuffer, -+ (struct sk_buff **) -+ &(crp->crp_buf))) { -+ EPRINTK("%s(): BufferList to SkBuff " -+ "conversion error.\n", __FUNCTION__); -+ crp->crp_etype = EPERM; -+ } -+ } else { -+ icp_ocfDrvBufferListToPtrAndLen(pDstBuffer, -+ (void **)&tempBasePtr, -+ &tempLen); -+ crp->crp_olen = (int)tempLen; -+ } -+ -+ } else { -+ DPRINTK("%s(): The callback from the LAC component has failed" -+ "(status == %d).\n", __FUNCTION__, status); -+ -+ crp->crp_etype = ECANCELED; -+ } -+ -+ if (temp_drvOpData->numBufferListArray > -+ ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS) { -+ kfree(pDstBuffer->pBuffers); -+ } -+ icp_ocfDrvFreeMetaData(pDstBuffer); -+ kmem_cache_free(drvOpData_zone, temp_drvOpData); -+ -+ /* Invoke the OCF callback function */ -+ crypto_done(crp); -+ -+ return; -+} -+ -+/* Name : icp_ocfDrvNewSession -+ * -+ * Description : This function will create a new Driver<->OCF session -+ * -+ * Notes : LAC session registration happens during the first perform call. -+ * That is the first time we know all information about a given session. -+ */ -+int icp_ocfDrvNewSession(device_t dev, uint32_t * sid, struct cryptoini *cri) -+{ -+ struct icp_drvSessionData *sessionData = NULL; -+ uint32_t delete_session = 0; -+ -+ /* The SID passed in should be our driver ID. We can return the */ -+ /* local ID (LID) which is a unique identifier which we can use */ -+ /* to differentiate between the encrypt/decrypt LAC session handles */ -+ if (NULL == sid) { -+ EPRINTK("%s(): Invalid input parameters - NULL sid.\n", -+ __FUNCTION__); -+ return EINVAL; -+ } -+ -+ if (NULL == cri) { -+ EPRINTK("%s(): Invalid input parameters - NULL cryptoini.\n", -+ __FUNCTION__); -+ return EINVAL; -+ } -+ -+ if (icp_ocfDrvDriverId != *sid) { -+ EPRINTK("%s(): Invalid input parameters - bad driver ID\n", -+ __FUNCTION__); -+ EPRINTK("\t sid = 0x08%p \n \t cri = 0x08%p \n", sid, cri); -+ return EINVAL; -+ } -+ -+ sessionData = kmem_cache_zalloc(drvSessionData_zone, GFP_ATOMIC); -+ if (NULL == sessionData) { -+ DPRINTK("%s():No memory for Session Data\n", __FUNCTION__); -+ return ENOMEM; -+ } -+ -+ /*ENTER CRITICAL SECTION */ -+ spin_lock_bh(&icp_ocfDrvSymSessInfoListSpinlock); -+ /*put this check in the spinlock so no new sessions can be added to the -+ linked list when we are exiting */ -+ if (CPA_TRUE == atomic_read(&icp_ocfDrvIsExiting)) { -+ delete_session++; -+ -+ } else if (NO_OCF_TO_DRV_MAX_SESSIONS != max_sessions) { -+ if (atomic_read(&num_ocf_to_drv_registered_sessions) >= -+ (max_sessions - -+ atomic_read(&lac_session_failed_dereg_count))) { -+ delete_session++; -+ } else { -+ atomic_inc(&num_ocf_to_drv_registered_sessions); -+ /* Add to session data linked list */ -+ list_add(&(sessionData->listNode), -+ &icp_ocfDrvGlobalSymListHead); -+ } -+ -+ } else if (NO_OCF_TO_DRV_MAX_SESSIONS == max_sessions) { -+ list_add(&(sessionData->listNode), -+ &icp_ocfDrvGlobalSymListHead); -+ } -+ -+ sessionData->inUse = ICP_SESSION_INITIALISED; -+ -+ /*EXIT CRITICAL SECTION */ -+ spin_unlock_bh(&icp_ocfDrvSymSessInfoListSpinlock); -+ -+ if (delete_session) { -+ DPRINTK("%s():No Session handles available\n", __FUNCTION__); -+ kmem_cache_free(drvSessionData_zone, sessionData); -+ return EPERM; -+ } -+ -+ if (ICP_OCF_DRV_STATUS_SUCCESS != -+ icp_ocfDrvAlgorithmSetup(cri, &(sessionData->lacSessCtx))) { -+ DPRINTK("%s():algorithm not supported\n", __FUNCTION__); -+ icp_ocfDrvFreeOCFSession(sessionData); -+ return EINVAL; -+ } -+ -+ if (cri->cri_next) { -+ if (cri->cri_next->cri_next != NULL) { -+ DPRINTK("%s():only two chained algorithms supported\n", -+ __FUNCTION__); -+ icp_ocfDrvFreeOCFSession(sessionData); -+ return EPERM; -+ } -+ -+ if (ICP_OCF_DRV_STATUS_SUCCESS != -+ icp_ocfDrvAlgorithmSetup(cri->cri_next, -+ &(sessionData->lacSessCtx))) { -+ DPRINTK("%s():second algorithm not supported\n", -+ __FUNCTION__); -+ icp_ocfDrvFreeOCFSession(sessionData); -+ return EINVAL; -+ } -+ -+ sessionData->lacSessCtx.symOperation = -+ CPA_CY_SYM_OP_ALGORITHM_CHAINING; -+ } -+ -+ *sid = (uint32_t) sessionData; -+ -+ return ICP_OCF_DRV_STATUS_SUCCESS; -+} -+ -+/* Name : icp_ocfDrvAlgorithmSetup -+ * -+ * Description : This function builds the session context data from the -+ * information supplied through OCF. Algorithm chain order and whether the -+ * session is Encrypt/Decrypt can only be found out at perform time however, so -+ * the session is registered with LAC at that time. -+ */ -+static int -+icp_ocfDrvAlgorithmSetup(struct cryptoini *cri, -+ CpaCySymSessionSetupData * lacSessCtx) -+{ -+ -+ lacSessCtx->sessionPriority = CPA_CY_PRIORITY_NORMAL; -+ -+ switch (cri->cri_alg) { -+ -+ case CRYPTO_NULL_CBC: -+ DPRINTK("%s(): NULL CBC\n", __FUNCTION__); -+ lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER; -+ lacSessCtx->cipherSetupData.cipherAlgorithm = -+ CPA_CY_SYM_CIPHER_NULL; -+ lacSessCtx->cipherSetupData.cipherKeyLenInBytes = -+ cri->cri_klen / NUM_BITS_IN_BYTE; -+ lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key; -+ break; -+ -+ case CRYPTO_DES_CBC: -+ DPRINTK("%s(): DES CBC\n", __FUNCTION__); -+ lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER; -+ lacSessCtx->cipherSetupData.cipherAlgorithm = -+ CPA_CY_SYM_CIPHER_DES_CBC; -+ lacSessCtx->cipherSetupData.cipherKeyLenInBytes = -+ cri->cri_klen / NUM_BITS_IN_BYTE; -+ lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key; -+ break; -+ -+ case CRYPTO_3DES_CBC: -+ DPRINTK("%s(): 3DES CBC\n", __FUNCTION__); -+ lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER; -+ lacSessCtx->cipherSetupData.cipherAlgorithm = -+ CPA_CY_SYM_CIPHER_3DES_CBC; -+ lacSessCtx->cipherSetupData.cipherKeyLenInBytes = -+ cri->cri_klen / NUM_BITS_IN_BYTE; -+ lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key; -+ break; -+ -+ case CRYPTO_AES_CBC: -+ DPRINTK("%s(): AES CBC\n", __FUNCTION__); -+ lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER; -+ lacSessCtx->cipherSetupData.cipherAlgorithm = -+ CPA_CY_SYM_CIPHER_AES_CBC; -+ lacSessCtx->cipherSetupData.cipherKeyLenInBytes = -+ cri->cri_klen / NUM_BITS_IN_BYTE; -+ lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key; -+ break; -+ -+ case CRYPTO_ARC4: -+ DPRINTK("%s(): ARC4\n", __FUNCTION__); -+ lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER; -+ lacSessCtx->cipherSetupData.cipherAlgorithm = -+ CPA_CY_SYM_CIPHER_ARC4; -+ lacSessCtx->cipherSetupData.cipherKeyLenInBytes = -+ cri->cri_klen / NUM_BITS_IN_BYTE; -+ lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key; -+ break; -+ -+ case CRYPTO_SHA1: -+ DPRINTK("%s(): SHA1\n", __FUNCTION__); -+ lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; -+ lacSessCtx->hashSetupData.hashAlgorithm = CPA_CY_SYM_HASH_SHA1; -+ lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN; -+ lacSessCtx->hashSetupData.digestResultLenInBytes = -+ (cri->cri_mlen ? -+ cri->cri_mlen : ICP_SHA1_DIGEST_SIZE_IN_BYTES); -+ -+ break; -+ -+ case CRYPTO_SHA1_HMAC: -+ DPRINTK("%s(): SHA1_HMAC\n", __FUNCTION__); -+ lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; -+ lacSessCtx->hashSetupData.hashAlgorithm = CPA_CY_SYM_HASH_SHA1; -+ lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH; -+ lacSessCtx->hashSetupData.digestResultLenInBytes = -+ (cri->cri_mlen ? -+ cri->cri_mlen : ICP_SHA1_DIGEST_SIZE_IN_BYTES); -+ lacSessCtx->hashSetupData.authModeSetupData.authKey = -+ cri->cri_key; -+ lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes = -+ cri->cri_klen / NUM_BITS_IN_BYTE; -+ lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0; -+ -+ break; -+ -+ case CRYPTO_SHA2_256: -+ DPRINTK("%s(): SHA256\n", __FUNCTION__); -+ lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; -+ lacSessCtx->hashSetupData.hashAlgorithm = -+ CPA_CY_SYM_HASH_SHA256; -+ lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN; -+ lacSessCtx->hashSetupData.digestResultLenInBytes = -+ (cri->cri_mlen ? -+ cri->cri_mlen : ICP_SHA256_DIGEST_SIZE_IN_BYTES); -+ -+ break; -+ -+ case CRYPTO_SHA2_256_HMAC: -+ DPRINTK("%s(): SHA256_HMAC\n", __FUNCTION__); -+ lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; -+ lacSessCtx->hashSetupData.hashAlgorithm = -+ CPA_CY_SYM_HASH_SHA256; -+ lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH; -+ lacSessCtx->hashSetupData.digestResultLenInBytes = -+ (cri->cri_mlen ? -+ cri->cri_mlen : ICP_SHA256_DIGEST_SIZE_IN_BYTES); -+ lacSessCtx->hashSetupData.authModeSetupData.authKey = -+ cri->cri_key; -+ lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes = -+ cri->cri_klen / NUM_BITS_IN_BYTE; -+ lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0; -+ -+ break; -+ -+ case CRYPTO_SHA2_384: -+ DPRINTK("%s(): SHA384\n", __FUNCTION__); -+ lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; -+ lacSessCtx->hashSetupData.hashAlgorithm = -+ CPA_CY_SYM_HASH_SHA384; -+ lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN; -+ lacSessCtx->hashSetupData.digestResultLenInBytes = -+ (cri->cri_mlen ? -+ cri->cri_mlen : ICP_SHA384_DIGEST_SIZE_IN_BYTES); -+ -+ break; -+ -+ case CRYPTO_SHA2_384_HMAC: -+ DPRINTK("%s(): SHA384_HMAC\n", __FUNCTION__); -+ lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; -+ lacSessCtx->hashSetupData.hashAlgorithm = -+ CPA_CY_SYM_HASH_SHA384; -+ lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH; -+ lacSessCtx->hashSetupData.digestResultLenInBytes = -+ (cri->cri_mlen ? -+ cri->cri_mlen : ICP_SHA384_DIGEST_SIZE_IN_BYTES); -+ lacSessCtx->hashSetupData.authModeSetupData.authKey = -+ cri->cri_key; -+ lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes = -+ cri->cri_klen / NUM_BITS_IN_BYTE; -+ lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0; -+ -+ break; -+ -+ case CRYPTO_SHA2_512: -+ DPRINTK("%s(): SHA512\n", __FUNCTION__); -+ lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; -+ lacSessCtx->hashSetupData.hashAlgorithm = -+ CPA_CY_SYM_HASH_SHA512; -+ lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN; -+ lacSessCtx->hashSetupData.digestResultLenInBytes = -+ (cri->cri_mlen ? -+ cri->cri_mlen : ICP_SHA512_DIGEST_SIZE_IN_BYTES); -+ -+ break; -+ -+ case CRYPTO_SHA2_512_HMAC: -+ DPRINTK("%s(): SHA512_HMAC\n", __FUNCTION__); -+ lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; -+ lacSessCtx->hashSetupData.hashAlgorithm = -+ CPA_CY_SYM_HASH_SHA512; -+ lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH; -+ lacSessCtx->hashSetupData.digestResultLenInBytes = -+ (cri->cri_mlen ? -+ cri->cri_mlen : ICP_SHA512_DIGEST_SIZE_IN_BYTES); -+ lacSessCtx->hashSetupData.authModeSetupData.authKey = -+ cri->cri_key; -+ lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes = -+ cri->cri_klen / NUM_BITS_IN_BYTE; -+ lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0; -+ -+ break; -+ -+ case CRYPTO_MD5: -+ DPRINTK("%s(): MD5\n", __FUNCTION__); -+ lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; -+ lacSessCtx->hashSetupData.hashAlgorithm = CPA_CY_SYM_HASH_MD5; -+ lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN; -+ lacSessCtx->hashSetupData.digestResultLenInBytes = -+ (cri->cri_mlen ? -+ cri->cri_mlen : ICP_MD5_DIGEST_SIZE_IN_BYTES); -+ -+ break; -+ -+ case CRYPTO_MD5_HMAC: -+ DPRINTK("%s(): MD5_HMAC\n", __FUNCTION__); -+ lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; -+ lacSessCtx->hashSetupData.hashAlgorithm = CPA_CY_SYM_HASH_MD5; -+ lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH; -+ lacSessCtx->hashSetupData.digestResultLenInBytes = -+ (cri->cri_mlen ? -+ cri->cri_mlen : ICP_MD5_DIGEST_SIZE_IN_BYTES); -+ lacSessCtx->hashSetupData.authModeSetupData.authKey = -+ cri->cri_key; -+ lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes = -+ cri->cri_klen / NUM_BITS_IN_BYTE; -+ lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0; -+ -+ break; -+ -+ default: -+ DPRINTK("%s(): ALG Setup FAIL\n", __FUNCTION__); -+ return ICP_OCF_DRV_STATUS_FAIL; -+ } -+ -+ return ICP_OCF_DRV_STATUS_SUCCESS; -+} -+ -+/* Name : icp_ocfDrvFreeOCFSession -+ * -+ * Description : This function deletes all existing Session data representing -+ * the Cryptographic session established between OCF and this driver. This -+ * also includes freeing the memory allocated for the session context. The -+ * session object is also removed from the session linked list. -+ */ -+static void icp_ocfDrvFreeOCFSession(struct icp_drvSessionData *sessionData) -+{ -+ -+ sessionData->inUse = ICP_SESSION_DEREGISTERED; -+ -+ /*ENTER CRITICAL SECTION */ -+ spin_lock_bh(&icp_ocfDrvSymSessInfoListSpinlock); -+ -+ if (CPA_TRUE == atomic_read(&icp_ocfDrvIsExiting)) { -+ /*If the Driver is exiting, allow that process to -+ handle any deletions */ -+ /*EXIT CRITICAL SECTION */ -+ spin_unlock_bh(&icp_ocfDrvSymSessInfoListSpinlock); -+ return; -+ } -+ -+ atomic_dec(&num_ocf_to_drv_registered_sessions); -+ -+ list_del(&(sessionData->listNode)); -+ -+ /*EXIT CRITICAL SECTION */ -+ spin_unlock_bh(&icp_ocfDrvSymSessInfoListSpinlock); -+ -+ if (NULL != sessionData->sessHandle) { -+ kfree(sessionData->sessHandle); -+ } -+ kmem_cache_free(drvSessionData_zone, sessionData); -+} -+ -+/* Name : icp_ocfDrvFreeLACSession -+ * -+ * Description : This attempts to deregister a LAC session. If it fails, the -+ * deregistation retry function is called. -+ */ -+int icp_ocfDrvFreeLACSession(device_t dev, uint64_t sid) -+{ -+ CpaCySymSessionCtx sessionToDeregister = NULL; -+ struct icp_drvSessionData *sessionData = NULL; -+ CpaStatus lacStatus = CPA_STATUS_SUCCESS; -+ int retval = 0; -+ -+ sessionData = (struct icp_drvSessionData *)CRYPTO_SESID2LID(sid); -+ if (NULL == sessionData) { -+ EPRINTK("%s(): OCF Free session called with Null Session ID.\n", -+ __FUNCTION__); -+ return EINVAL; -+ } -+ -+ sessionToDeregister = sessionData->sessHandle; -+ -+ if (ICP_SESSION_INITIALISED == sessionData->inUse) { -+ DPRINTK("%s() Session not registered with LAC\n", __FUNCTION__); -+ } else if (NULL == sessionData->sessHandle) { -+ EPRINTK -+ ("%s(): OCF Free session called with Null Session Handle.\n", -+ __FUNCTION__); -+ return EINVAL; -+ } else { -+ lacStatus = cpaCySymRemoveSession(CPA_INSTANCE_HANDLE_SINGLE, -+ sessionToDeregister); -+ if (CPA_STATUS_RETRY == lacStatus) { -+ if (ICP_OCF_DRV_STATUS_SUCCESS != -+ icp_ocfDrvDeregRetry(&sessionToDeregister)) { -+ /* the retry function increments the -+ dereg failed count */ -+ DPRINTK("%s(): LAC failed to deregister the " -+ "session. (localSessionId= %p)\n", -+ __FUNCTION__, sessionToDeregister); -+ retval = EPERM; -+ } -+ -+ } else if (CPA_STATUS_SUCCESS != lacStatus) { -+ DPRINTK("%s(): LAC failed to deregister the session. " -+ "localSessionId= %p, lacStatus = %d\n", -+ __FUNCTION__, sessionToDeregister, lacStatus); -+ atomic_inc(&lac_session_failed_dereg_count); -+ retval = EPERM; -+ } -+ } -+ -+ icp_ocfDrvFreeOCFSession(sessionData); -+ return retval; -+ -+} -+ -+/* Name : icp_ocfDrvAlgCheck -+ * -+ * Description : This function checks whether the cryptodesc argument pertains -+ * to a sym or hash function -+ */ -+static int icp_ocfDrvAlgCheck(struct cryptodesc *crp_desc) -+{ -+ -+ if (crp_desc->crd_alg == CRYPTO_3DES_CBC || -+ crp_desc->crd_alg == CRYPTO_AES_CBC || -+ crp_desc->crd_alg == CRYPTO_DES_CBC || -+ crp_desc->crd_alg == CRYPTO_NULL_CBC || -+ crp_desc->crd_alg == CRYPTO_ARC4) { -+ return ICP_OCF_DRV_ALG_CIPHER; -+ } -+ -+ return ICP_OCF_DRV_ALG_HASH; -+} -+ -+/* Name : icp_ocfDrvSymProcess -+ * -+ * Description : This function will map symmetric functionality calls from OCF -+ * to the LAC API. It will also allocate memory to store the session context. -+ * -+ * Notes: If it is the first perform call for a given session, then a LAC -+ * session is registered. After the session is registered, no checks as -+ * to whether session paramaters have changed (e.g. alg chain order) are -+ * done. -+ */ -+int icp_ocfDrvSymProcess(device_t dev, struct cryptop *crp, int hint) -+{ -+ struct icp_drvSessionData *sessionData = NULL; -+ struct icp_drvOpData *drvOpData = NULL; -+ CpaStatus lacStatus = CPA_STATUS_SUCCESS; -+ Cpa32U sessionCtxSizeInBytes = 0; -+ uint16_t numBufferListArray = 0; -+ -+ if (NULL == crp) { -+ DPRINTK("%s(): Invalid input parameters, cryptop is NULL\n", -+ __FUNCTION__); -+ return EINVAL; -+ } -+ -+ if (NULL == crp->crp_desc) { -+ DPRINTK("%s(): Invalid input parameters, no crp_desc attached " -+ "to crp\n", __FUNCTION__); -+ crp->crp_etype = EINVAL; -+ return EINVAL; -+ } -+ -+ if (NULL == crp->crp_buf) { -+ DPRINTK("%s(): Invalid input parameters, no buffer attached " -+ "to crp\n", __FUNCTION__); -+ crp->crp_etype = EINVAL; -+ return EINVAL; -+ } -+ -+ if (CPA_TRUE == atomic_read(&icp_ocfDrvIsExiting)) { -+ crp->crp_etype = EFAULT; -+ return EFAULT; -+ } -+ -+ sessionData = (struct icp_drvSessionData *) -+ (CRYPTO_SESID2LID(crp->crp_sid)); -+ if (NULL == sessionData) { -+ DPRINTK("%s(): Invalid input parameters, Null Session ID \n", -+ __FUNCTION__); -+ crp->crp_etype = EINVAL; -+ return EINVAL; -+ } -+ -+/*If we get a request against a deregisted session, cancel operation*/ -+ if (ICP_SESSION_DEREGISTERED == sessionData->inUse) { -+ DPRINTK("%s(): Session ID %d was deregistered \n", -+ __FUNCTION__, (int)(CRYPTO_SESID2LID(crp->crp_sid))); -+ crp->crp_etype = EFAULT; -+ return EFAULT; -+ } -+ -+/*If none of the session states are set, then the session structure was either -+ not initialised properly or we are reading from a freed memory area (possible -+ due to OCF batch mode not removing queued requests against deregistered -+ sessions*/ -+ if (ICP_SESSION_INITIALISED != sessionData->inUse && -+ ICP_SESSION_RUNNING != sessionData->inUse) { -+ DPRINTK("%s(): Session - ID %d - not properly initialised or " -+ "memory freed back to the kernel \n", -+ __FUNCTION__, (int)(CRYPTO_SESID2LID(crp->crp_sid))); -+ crp->crp_etype = EINVAL; -+ return EINVAL; -+ } -+ -+ /*For the below checks, remember error checking is already done in LAC. -+ We're not validating inputs subsequent to registration */ -+ if (sessionData->inUse == ICP_SESSION_INITIALISED) { -+ DPRINTK("%s(): Initialising session\n", __FUNCTION__); -+ -+ if (NULL != crp->crp_desc->crd_next) { -+ if (ICP_OCF_DRV_ALG_CIPHER == -+ icp_ocfDrvAlgCheck(crp->crp_desc)) { -+ -+ sessionData->lacSessCtx.algChainOrder = -+ CPA_CY_SYM_ALG_CHAIN_ORDER_CIPHER_THEN_HASH; -+ -+ if (crp->crp_desc->crd_flags & CRD_F_ENCRYPT) { -+ sessionData->lacSessCtx.cipherSetupData. -+ cipherDirection = -+ CPA_CY_SYM_CIPHER_DIRECTION_ENCRYPT; -+ } else { -+ sessionData->lacSessCtx.cipherSetupData. -+ cipherDirection = -+ CPA_CY_SYM_CIPHER_DIRECTION_DECRYPT; -+ } -+ } else { -+ sessionData->lacSessCtx.algChainOrder = -+ CPA_CY_SYM_ALG_CHAIN_ORDER_HASH_THEN_CIPHER; -+ -+ if (crp->crp_desc->crd_next->crd_flags & -+ CRD_F_ENCRYPT) { -+ sessionData->lacSessCtx.cipherSetupData. -+ cipherDirection = -+ CPA_CY_SYM_CIPHER_DIRECTION_ENCRYPT; -+ } else { -+ sessionData->lacSessCtx.cipherSetupData. -+ cipherDirection = -+ CPA_CY_SYM_CIPHER_DIRECTION_DECRYPT; -+ } -+ -+ } -+ -+ } else if (ICP_OCF_DRV_ALG_CIPHER == -+ icp_ocfDrvAlgCheck(crp->crp_desc)) { -+ if (crp->crp_desc->crd_flags & CRD_F_ENCRYPT) { -+ sessionData->lacSessCtx.cipherSetupData. -+ cipherDirection = -+ CPA_CY_SYM_CIPHER_DIRECTION_ENCRYPT; -+ } else { -+ sessionData->lacSessCtx.cipherSetupData. -+ cipherDirection = -+ CPA_CY_SYM_CIPHER_DIRECTION_DECRYPT; -+ } -+ -+ } -+ -+ /*No action required for standalone Auth here */ -+ -+ /* Allocate memory for SymSessionCtx before the Session Registration */ -+ lacStatus = -+ cpaCySymSessionCtxGetSize(CPA_INSTANCE_HANDLE_SINGLE, -+ &(sessionData->lacSessCtx), -+ &sessionCtxSizeInBytes); -+ if (CPA_STATUS_SUCCESS != lacStatus) { -+ EPRINTK("%s(): cpaCySymSessionCtxGetSize failed - %d\n", -+ __FUNCTION__, lacStatus); -+ return EINVAL; -+ } -+ sessionData->sessHandle = -+ kmalloc(sessionCtxSizeInBytes, GFP_ATOMIC); -+ if (NULL == sessionData->sessHandle) { -+ EPRINTK -+ ("%s(): Failed to get memory for SymSessionCtx\n", -+ __FUNCTION__); -+ return ENOMEM; -+ } -+ -+ lacStatus = cpaCySymInitSession(CPA_INSTANCE_HANDLE_SINGLE, -+ icp_ocfDrvSymCallBack, -+ &(sessionData->lacSessCtx), -+ sessionData->sessHandle); -+ -+ if (CPA_STATUS_SUCCESS != lacStatus) { -+ EPRINTK("%s(): cpaCySymInitSession failed -%d \n", -+ __FUNCTION__, lacStatus); -+ return EFAULT; -+ } -+ -+ sessionData->inUse = ICP_SESSION_RUNNING; -+ } -+ -+ drvOpData = kmem_cache_zalloc(drvOpData_zone, GFP_ATOMIC); -+ if (NULL == drvOpData) { -+ EPRINTK("%s():Failed to get memory for drvOpData\n", -+ __FUNCTION__); -+ crp->crp_etype = ENOMEM; -+ return ENOMEM; -+ } -+ -+ drvOpData->lacOpData.pSessionCtx = sessionData->sessHandle; -+ drvOpData->digestSizeInBytes = sessionData->lacSessCtx.hashSetupData. -+ digestResultLenInBytes; -+ drvOpData->crp = crp; -+ -+ /* Set the default buffer list array memory allocation */ -+ drvOpData->srcBuffer.pBuffers = drvOpData->bufferListArray; -+ drvOpData->numBufferListArray = ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS; -+ -+ /* -+ * Allocate buffer list array memory allocation if the -+ * data fragment is more than the default allocation -+ */ -+ if (crp->crp_flags & CRYPTO_F_SKBUF) { -+ numBufferListArray = icp_ocfDrvGetSkBuffFrags((struct sk_buff *) -+ crp->crp_buf); -+ if (ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS < numBufferListArray) { -+ DPRINTK("%s() numBufferListArray more than default\n", -+ __FUNCTION__); -+ drvOpData->srcBuffer.pBuffers = NULL; -+ drvOpData->srcBuffer.pBuffers = -+ kmalloc(numBufferListArray * -+ sizeof(CpaFlatBuffer), GFP_ATOMIC); -+ if (NULL == drvOpData->srcBuffer.pBuffers) { -+ EPRINTK("%s() Failed to get memory for " -+ "pBuffers\n", __FUNCTION__); -+ kmem_cache_free(drvOpData_zone, drvOpData); -+ crp->crp_etype = ENOMEM; -+ return ENOMEM; -+ } -+ drvOpData->numBufferListArray = numBufferListArray; -+ } -+ } -+ -+ /* -+ * Check the type of buffer structure we got and convert it into -+ * CpaBufferList format. -+ */ -+ if (crp->crp_flags & CRYPTO_F_SKBUF) { -+ if (ICP_OCF_DRV_STATUS_SUCCESS != -+ icp_ocfDrvSkBuffToBufferList((struct sk_buff *)crp->crp_buf, -+ &(drvOpData->srcBuffer))) { -+ EPRINTK("%s():Failed to translate from SK_BUF " -+ "to bufferlist\n", __FUNCTION__); -+ crp->crp_etype = EINVAL; -+ goto err; -+ } -+ -+ drvOpData->bufferType = CRYPTO_F_SKBUF; -+ } else if (crp->crp_flags & CRYPTO_F_IOV) { -+ /* OCF only supports IOV of one entry. */ -+ if (NUM_IOV_SUPPORTED == -+ ((struct uio *)(crp->crp_buf))->uio_iovcnt) { -+ -+ icp_ocfDrvPtrAndLenToBufferList(((struct uio *)(crp-> -+ crp_buf))-> -+ uio_iov[0].iov_base, -+ ((struct uio *)(crp-> -+ crp_buf))-> -+ uio_iov[0].iov_len, -+ &(drvOpData-> -+ srcBuffer)); -+ -+ drvOpData->bufferType = CRYPTO_F_IOV; -+ -+ } else { -+ DPRINTK("%s():Unable to handle IOVs with lengths of " -+ "greater than one!\n", __FUNCTION__); -+ crp->crp_etype = EINVAL; -+ goto err; -+ } -+ -+ } else { -+ icp_ocfDrvPtrAndLenToBufferList(crp->crp_buf, -+ crp->crp_ilen, -+ &(drvOpData->srcBuffer)); -+ -+ drvOpData->bufferType = CRYPTO_BUF_CONTIG; -+ } -+ -+ if (ICP_OCF_DRV_STATUS_SUCCESS != -+ icp_ocfDrvProcessDataSetup(drvOpData, drvOpData->crp->crp_desc)) { -+ crp->crp_etype = EINVAL; -+ goto err; -+ } -+ -+ if (drvOpData->crp->crp_desc->crd_next != NULL) { -+ if (icp_ocfDrvProcessDataSetup(drvOpData, drvOpData->crp-> -+ crp_desc->crd_next)) { -+ crp->crp_etype = EINVAL; -+ goto err; -+ } -+ -+ } -+ -+ /* Allocate srcBuffer's private meta data */ -+ if (ICP_OCF_DRV_STATUS_SUCCESS != -+ icp_ocfDrvAllocMetaData(&(drvOpData->srcBuffer), drvOpData)) { -+ EPRINTK("%s() icp_ocfDrvAllocMetaData failed\n", __FUNCTION__); -+ memset(&(drvOpData->lacOpData), 0, sizeof(CpaCySymOpData)); -+ crp->crp_etype = EINVAL; -+ goto err; -+ } -+ -+ /* Perform "in-place" crypto operation */ -+ lacStatus = cpaCySymPerformOp(CPA_INSTANCE_HANDLE_SINGLE, -+ (void *)drvOpData, -+ &(drvOpData->lacOpData), -+ &(drvOpData->srcBuffer), -+ &(drvOpData->srcBuffer), -+ &(drvOpData->verifyResult)); -+ if (CPA_STATUS_RETRY == lacStatus) { -+ DPRINTK("%s(): cpaCySymPerformOp retry, lacStatus = %d\n", -+ __FUNCTION__, lacStatus); -+ memset(&(drvOpData->lacOpData), 0, sizeof(CpaCySymOpData)); -+ crp->crp_etype = EINVAL; -+ goto err; -+ } -+ if (CPA_STATUS_SUCCESS != lacStatus) { -+ EPRINTK("%s(): cpaCySymPerformOp failed, lacStatus = %d\n", -+ __FUNCTION__, lacStatus); -+ memset(&(drvOpData->lacOpData), 0, sizeof(CpaCySymOpData)); -+ crp->crp_etype = EINVAL; -+ goto err; -+ } -+ -+ return 0; //OCF success status value -+ -+ err: -+ if (drvOpData->numBufferListArray > ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS) { -+ kfree(drvOpData->srcBuffer.pBuffers); -+ } -+ icp_ocfDrvFreeMetaData(&(drvOpData->srcBuffer)); -+ kmem_cache_free(drvOpData_zone, drvOpData); -+ -+ return crp->crp_etype; -+} -+ -+/* Name : icp_ocfDrvProcessDataSetup -+ * -+ * Description : This function will setup all the cryptographic operation data -+ * that is required by LAC to execute the operation. -+ */ -+static int icp_ocfDrvProcessDataSetup(struct icp_drvOpData *drvOpData, -+ struct cryptodesc *crp_desc) -+{ -+ CpaCyRandGenOpData randGenOpData; -+ CpaFlatBuffer randData; -+ -+ drvOpData->lacOpData.packetType = CPA_CY_SYM_PACKET_TYPE_FULL; -+ -+ /* Convert from the cryptop to the ICP LAC crypto parameters */ -+ switch (crp_desc->crd_alg) { -+ case CRYPTO_NULL_CBC: -+ drvOpData->lacOpData. -+ cryptoStartSrcOffsetInBytes = crp_desc->crd_skip; -+ drvOpData->lacOpData. -+ messageLenToCipherInBytes = crp_desc->crd_len; -+ drvOpData->verifyResult = CPA_FALSE; -+ drvOpData->lacOpData.ivLenInBytes = NULL_BLOCK_LEN; -+ break; -+ case CRYPTO_DES_CBC: -+ drvOpData->lacOpData. -+ cryptoStartSrcOffsetInBytes = crp_desc->crd_skip; -+ drvOpData->lacOpData. -+ messageLenToCipherInBytes = crp_desc->crd_len; -+ drvOpData->verifyResult = CPA_FALSE; -+ drvOpData->lacOpData.ivLenInBytes = DES_BLOCK_LEN; -+ break; -+ case CRYPTO_3DES_CBC: -+ drvOpData->lacOpData. -+ cryptoStartSrcOffsetInBytes = crp_desc->crd_skip; -+ drvOpData->lacOpData. -+ messageLenToCipherInBytes = crp_desc->crd_len; -+ drvOpData->verifyResult = CPA_FALSE; -+ drvOpData->lacOpData.ivLenInBytes = DES3_BLOCK_LEN; -+ break; -+ case CRYPTO_ARC4: -+ drvOpData->lacOpData. -+ cryptoStartSrcOffsetInBytes = crp_desc->crd_skip; -+ drvOpData->lacOpData. -+ messageLenToCipherInBytes = crp_desc->crd_len; -+ drvOpData->verifyResult = CPA_FALSE; -+ drvOpData->lacOpData.ivLenInBytes = ARC4_COUNTER_LEN; -+ break; -+ case CRYPTO_AES_CBC: -+ drvOpData->lacOpData. -+ cryptoStartSrcOffsetInBytes = crp_desc->crd_skip; -+ drvOpData->lacOpData. -+ messageLenToCipherInBytes = crp_desc->crd_len; -+ drvOpData->verifyResult = CPA_FALSE; -+ drvOpData->lacOpData.ivLenInBytes = RIJNDAEL128_BLOCK_LEN; -+ break; -+ case CRYPTO_SHA1: -+ case CRYPTO_SHA1_HMAC: -+ case CRYPTO_SHA2_256: -+ case CRYPTO_SHA2_256_HMAC: -+ case CRYPTO_SHA2_384: -+ case CRYPTO_SHA2_384_HMAC: -+ case CRYPTO_SHA2_512: -+ case CRYPTO_SHA2_512_HMAC: -+ case CRYPTO_MD5: -+ case CRYPTO_MD5_HMAC: -+ drvOpData->lacOpData. -+ hashStartSrcOffsetInBytes = crp_desc->crd_skip; -+ drvOpData->lacOpData. -+ messageLenToHashInBytes = crp_desc->crd_len; -+ drvOpData->lacOpData. -+ pDigestResult = -+ icp_ocfDrvDigestPointerFind(drvOpData, crp_desc); -+ -+ if (NULL == drvOpData->lacOpData.pDigestResult) { -+ DPRINTK("%s(): ERROR - could not calculate " -+ "Digest Result memory address\n", __FUNCTION__); -+ return ICP_OCF_DRV_STATUS_FAIL; -+ } -+ -+ drvOpData->lacOpData.digestVerify = CPA_FALSE; -+ break; -+ default: -+ DPRINTK("%s(): Crypto process error - algorithm not " -+ "found \n", __FUNCTION__); -+ return ICP_OCF_DRV_STATUS_FAIL; -+ } -+ -+ /* Figure out what the IV is supposed to be */ -+ if ((crp_desc->crd_alg == CRYPTO_DES_CBC) || -+ (crp_desc->crd_alg == CRYPTO_3DES_CBC) || -+ (crp_desc->crd_alg == CRYPTO_AES_CBC)) { -+ /*ARC4 doesn't use an IV */ -+ if (crp_desc->crd_flags & CRD_F_IV_EXPLICIT) { -+ /* Explicit IV provided to OCF */ -+ drvOpData->lacOpData.pIv = crp_desc->crd_iv; -+ } else { -+ /* IV is not explicitly provided to OCF */ -+ -+ /* Point the LAC OP Data IV pointer to our allocated -+ storage location for this session. */ -+ drvOpData->lacOpData.pIv = drvOpData->ivData; -+ -+ if ((crp_desc->crd_flags & CRD_F_ENCRYPT) && -+ ((crp_desc->crd_flags & CRD_F_IV_PRESENT) == 0)) { -+ -+ /* Encrypting - need to create IV */ -+ randGenOpData.generateBits = CPA_TRUE; -+ randGenOpData.lenInBytes = MAX_IV_LEN_IN_BYTES; -+ -+ icp_ocfDrvPtrAndLenToFlatBuffer((Cpa8U *) -+ drvOpData-> -+ ivData, -+ MAX_IV_LEN_IN_BYTES, -+ &randData); -+ -+ if (CPA_STATUS_SUCCESS != -+ cpaCyRandGen(CPA_INSTANCE_HANDLE_SINGLE, -+ NULL, NULL, -+ &randGenOpData, &randData)) { -+ DPRINTK("%s(): ERROR - Failed to" -+ " generate" -+ " Initialisation Vector\n", -+ __FUNCTION__); -+ return ICP_OCF_DRV_STATUS_FAIL; -+ } -+ -+ crypto_copyback(drvOpData->crp-> -+ crp_flags, -+ drvOpData->crp->crp_buf, -+ crp_desc->crd_inject, -+ drvOpData->lacOpData. -+ ivLenInBytes, -+ (caddr_t) (drvOpData->lacOpData. -+ pIv)); -+ } else { -+ /* Reading IV from buffer */ -+ crypto_copydata(drvOpData->crp-> -+ crp_flags, -+ drvOpData->crp->crp_buf, -+ crp_desc->crd_inject, -+ drvOpData->lacOpData. -+ ivLenInBytes, -+ (caddr_t) (drvOpData->lacOpData. -+ pIv)); -+ } -+ -+ } -+ -+ } -+ -+ return ICP_OCF_DRV_STATUS_SUCCESS; -+} -+ -+/* Name : icp_ocfDrvDigestPointerFind -+ * -+ * Description : This function is used to find the memory address of where the -+ * digest information shall be stored in. Input buffer types are an skbuff, iov -+ * or flat buffer. The address is found using the buffer data start address and -+ * an offset. -+ * -+ * Note: In the case of a linux skbuff, the digest address may exist within -+ * a memory space linked to from the start buffer. These linked memory spaces -+ * must be traversed by the data length offset in order to find the digest start -+ * address. Whether there is enough space for the digest must also be checked. -+ */ -+ -+static uint8_t *icp_ocfDrvDigestPointerFind(struct icp_drvOpData *drvOpData, -+ struct cryptodesc *crp_desc) -+{ -+ -+ int offsetInBytes = crp_desc->crd_inject; -+ uint32_t digestSizeInBytes = drvOpData->digestSizeInBytes; -+ uint8_t *flat_buffer_base = NULL; -+ int flat_buffer_length = 0; -+ struct sk_buff *skb; -+ -+ if (drvOpData->crp->crp_flags & CRYPTO_F_SKBUF) { -+ /*check if enough overall space to store hash */ -+ skb = (struct sk_buff *)(drvOpData->crp->crp_buf); -+ -+ if (skb->len < (offsetInBytes + digestSizeInBytes)) { -+ DPRINTK("%s() Not enough space for Digest" -+ " payload after the offset (%d), " -+ "digest size (%d) \n", __FUNCTION__, -+ offsetInBytes, digestSizeInBytes); -+ return NULL; -+ } -+ -+ return icp_ocfDrvSkbuffDigestPointerFind(drvOpData, -+ offsetInBytes, -+ digestSizeInBytes); -+ -+ } else { -+ /* IOV or flat buffer */ -+ if (drvOpData->crp->crp_flags & CRYPTO_F_IOV) { -+ /*single IOV check has already been done */ -+ flat_buffer_base = ((struct uio *) -+ (drvOpData->crp->crp_buf))-> -+ uio_iov[0].iov_base; -+ flat_buffer_length = ((struct uio *) -+ (drvOpData->crp->crp_buf))-> -+ uio_iov[0].iov_len; -+ } else { -+ flat_buffer_base = (uint8_t *) drvOpData->crp->crp_buf; -+ flat_buffer_length = drvOpData->crp->crp_ilen; -+ } -+ -+ if (flat_buffer_length < (offsetInBytes + digestSizeInBytes)) { -+ DPRINTK("%s() Not enough space for Digest " -+ "(IOV/Flat Buffer) \n", __FUNCTION__); -+ return NULL; -+ } else { -+ return (uint8_t *) (flat_buffer_base + offsetInBytes); -+ } -+ } -+ DPRINTK("%s() Should not reach this point\n", __FUNCTION__); -+ return NULL; -+} -+ -+/* Name : icp_ocfDrvSkbuffDigestPointerFind -+ * -+ * Description : This function is used by icp_ocfDrvDigestPointerFind to process -+ * the non-linear portion of the skbuff if the fragmentation type is a linked -+ * list (frag_list is not NULL in the skb_shared_info structure) -+ */ -+static inline uint8_t *icp_ocfDrvSkbuffDigestPointerFind(struct icp_drvOpData -+ *drvOpData, -+ int offsetInBytes, -+ uint32_t -+ digestSizeInBytes) -+{ -+ -+ struct sk_buff *skb = NULL; -+ struct skb_shared_info *skb_shared = NULL; -+ -+ uint32_t skbuffisnonlinear = 0; -+ -+ uint32_t skbheadlen = 0; -+ -+ skb = (struct sk_buff *)(drvOpData->crp->crp_buf); -+ skbuffisnonlinear = skb_is_nonlinear(skb); -+ -+ skbheadlen = skb_headlen(skb); -+ -+ /*Linear skb checks */ -+ if (skbheadlen > offsetInBytes) { -+ -+ if (skbheadlen >= (offsetInBytes + digestSizeInBytes)) { -+ return (uint8_t *) (skb->data + offsetInBytes); -+ } else { -+ DPRINTK("%s() Auth payload stretches " -+ "accross contiguous memory\n", __FUNCTION__); -+ return NULL; -+ } -+ } else { -+ if (skbuffisnonlinear) { -+ offsetInBytes -= skbheadlen; -+ } else { -+ DPRINTK("%s() Offset outside of buffer boundaries\n", -+ __FUNCTION__); -+ return NULL; -+ } -+ } -+ -+ /*Non Linear checks */ -+ skb_shared = (struct skb_shared_info *)(skb->end); -+ if (unlikely(NULL == skb_shared)) { -+ DPRINTK("%s() skbuff shared info stucture is NULL! \n", -+ __FUNCTION__); -+ return NULL; -+ } else if ((0 != skb_shared->nr_frags) && -+ (skb_shared->frag_list != NULL)) { -+ DPRINTK("%s() skbuff nr_frags AND " -+ "frag_list not supported \n", __FUNCTION__); -+ return NULL; -+ } -+ -+ /*TCP segmentation more likely than IP fragmentation */ -+ if (likely(0 != skb_shared->nr_frags)) { -+ return icp_ocfDrvDigestSkbNRFragsCheck(skb, skb_shared, -+ offsetInBytes, -+ digestSizeInBytes); -+ } else if (skb_shared->frag_list != NULL) { -+ return icp_ocfDrvDigestSkbFragListCheck(skb, skb_shared, -+ offsetInBytes, -+ digestSizeInBytes); -+ } else { -+ DPRINTK("%s() skbuff is non-linear but does not show any " -+ "linked data\n", __FUNCTION__); -+ return NULL; -+ } -+ -+} -+ -+/* Name : icp_ocfDrvDigestSkbNRFragsCheck -+ * -+ * Description : This function is used by icp_ocfDrvSkbuffDigestPointerFind to -+ * process the non-linear portion of the skbuff, if the fragmentation type is -+ * page fragments -+ */ -+static inline uint8_t *icp_ocfDrvDigestSkbNRFragsCheck(struct sk_buff *skb, -+ struct skb_shared_info -+ *skb_shared, -+ int offsetInBytes, -+ uint32_t -+ digestSizeInBytes) -+{ -+ int i = 0; -+ /*nr_frags starts from 1 */ -+ if (MAX_SKB_FRAGS < skb_shared->nr_frags) { -+ DPRINTK("%s error processing skbuff " -+ "page frame -- MAX FRAGS exceeded \n", __FUNCTION__); -+ return NULL; -+ } -+ -+ for (i = 0; i < skb_shared->nr_frags; i++) { -+ -+ if (offsetInBytes >= skb_shared->frags[i].size) { -+ /*offset still greater than data position */ -+ offsetInBytes -= skb_shared->frags[i].size; -+ } else { -+ /* found the page containing start of hash */ -+ -+ if (NULL == skb_shared->frags[i].page) { -+ DPRINTK("%s() Linked page is NULL!\n", -+ __FUNCTION__); -+ return NULL; -+ } -+ -+ if (offsetInBytes + digestSizeInBytes > -+ skb_shared->frags[i].size) { -+ DPRINTK("%s() Auth payload stretches accross " -+ "contiguous memory\n", __FUNCTION__); -+ return NULL; -+ } else { -+ return (uint8_t *) (skb_shared->frags[i].page + -+ skb_shared->frags[i]. -+ page_offset + -+ offsetInBytes); -+ } -+ } -+ /*only possible if internal page sizes are set wrong */ -+ if (offsetInBytes < 0) { -+ DPRINTK("%s error processing skbuff page frame " -+ "-- offset calculation \n", __FUNCTION__); -+ return NULL; -+ } -+ } -+ /*only possible if internal page sizes are set wrong */ -+ DPRINTK("%s error processing skbuff page frame " -+ "-- ran out of page fragments, remaining offset = %d \n", -+ __FUNCTION__, offsetInBytes); -+ return NULL; -+ -+} -+ -+/* Name : icp_ocfDrvDigestSkbFragListCheck -+ * -+ * Description : This function is used by icp_ocfDrvSkbuffDigestPointerFind to -+ * process the non-linear portion of the skbuff, if the fragmentation type is -+ * a linked list -+ * -+ */ -+static inline uint8_t *icp_ocfDrvDigestSkbFragListCheck(struct sk_buff *skb, -+ struct skb_shared_info -+ *skb_shared, -+ int offsetInBytes, -+ uint32_t -+ digestSizeInBytes) -+{ -+ -+ struct sk_buff *skb_list = skb_shared->frag_list; -+ /*check added for readability */ -+ if (NULL == skb_list) { -+ DPRINTK("%s error processing skbuff " -+ "-- no more list! \n", __FUNCTION__); -+ return NULL; -+ } -+ -+ for (; skb_list; skb_list = skb_list->next) { -+ if (NULL == skb_list) { -+ DPRINTK("%s error processing skbuff " -+ "-- no more list! \n", __FUNCTION__); -+ return NULL; -+ } -+ -+ if (offsetInBytes >= skb_list->len) { -+ offsetInBytes -= skb_list->len; -+ -+ } else { -+ if (offsetInBytes + digestSizeInBytes > skb_list->len) { -+ DPRINTK("%s() Auth payload stretches accross " -+ "contiguous memory\n", __FUNCTION__); -+ return NULL; -+ } else { -+ return (uint8_t *) -+ (skb_list->data + offsetInBytes); -+ } -+ -+ } -+ -+ /*This check is only needed if internal skb_list length values -+ are set wrong. */ -+ if (0 > offsetInBytes) { -+ DPRINTK("%s() error processing skbuff object -- offset " -+ "calculation \n", __FUNCTION__); -+ return NULL; -+ } -+ -+ } -+ -+ /*catch all for unusual for-loop exit. -+ This code should never be reached */ -+ DPRINTK("%s() Catch-All hit! Process error.\n", __FUNCTION__); -+ return NULL; -+} -diff -Nur linux-2.6.30.orig/crypto/ocf/ep80579/Makefile linux-2.6.30/crypto/ocf/ep80579/Makefile ---- linux-2.6.30.orig/crypto/ocf/ep80579/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/ep80579/Makefile 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,107 @@ -+######################################################################### -+# -+# Targets supported -+# all - builds everything and installs -+# install - identical to all -+# depend - build dependencies -+# clean - clears derived objects except the .depend files -+# distclean- clears all derived objects and the .depend file -+# -+# @par -+# This file is provided under a dual BSD/GPLv2 license. When using or -+# redistributing this file, you may do so under either license. -+# -+# GPL LICENSE SUMMARY -+# -+# Copyright(c) 2007,2008 Intel Corporation. All rights reserved. -+# -+# This program is free software; you can redistribute it and/or modify -+# it under the terms of version 2 of the GNU General Public License as -+# published by the Free Software Foundation. -+# -+# This program is distributed in the hope that it will be useful, but -+# WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+# General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. -+# The full GNU General Public License is included in this distribution -+# in the file called LICENSE.GPL. -+# -+# Contact Information: -+# Intel Corporation -+# -+# BSD LICENSE -+# -+# Copyright(c) 2007,2008 Intel Corporation. All rights reserved. -+# All rights reserved. -+# -+# Redistribution and use in source and binary forms, with or without -+# modification, are permitted provided that the following conditions -+# are met: -+# -+# * Redistributions of source code must retain the above copyright -+# notice, this list of conditions and the following disclaimer. -+# * Redistributions in binary form must reproduce the above copyright -+# notice, this list of conditions and the following disclaimer in -+# the documentation and/or other materials provided with the -+# distribution. -+# * Neither the name of Intel Corporation nor the names of its -+# contributors may be used to endorse or promote products derived -+# from this software without specific prior written permission. -+# -+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+# -+# -+# version: Security.L.1.0.130 -+############################################################################ -+ -+ -+####################Common variables and definitions######################## -+ -+# Ensure The ENV_DIR environmental var is defined. -+ifndef ICP_ENV_DIR -+$(error ICP_ENV_DIR is undefined. Please set the path to your environment makefile \ -+ "-> setenv ICP_ENV_DIR <path>") -+endif -+ -+#Add your project environment Makefile -+include $(ICP_ENV_DIR)/environment.mk -+ -+#include the makefile with all the default and common Make variable definitions -+include $(ICP_BUILDSYSTEM_PATH)/build_files/common.mk -+ -+#Add the name for the executable, Library or Module output definitions -+OUTPUT_NAME= icp_ocf -+ -+# List of Source Files to be compiled -+SOURCES= icp_common.c icp_sym.c icp_asym.c -+ -+#common includes between all supported OSes -+INCLUDES= -I $(ICP_API_DIR) -I$(ICP_LAC_API) \ -+-I$(ICP_OCF_SRC_DIR) -+ -+# The location of the os level makefile needs to be changed. -+include $(ICP_ENV_DIR)/$(ICP_OS)_$(ICP_OS_LEVEL).mk -+ -+# On the line directly below list the outputs you wish to build for, -+# e.g "lib_static lib_shared exe module" as show below -+install: module -+ -+###################Include rules makefiles######################## -+include $(ICP_BUILDSYSTEM_PATH)/build_files/rules.mk -+###################End of Rules inclusion######################### -+ -+ -diff -Nur linux-2.6.30.orig/crypto/ocf/hifn/hifn7751.c linux-2.6.30/crypto/ocf/hifn/hifn7751.c ---- linux-2.6.30.orig/crypto/ocf/hifn/hifn7751.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/hifn/hifn7751.c 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,2970 @@ -+/* $OpenBSD: hifn7751.c,v 1.120 2002/05/17 00:33:34 deraadt Exp $ */ -+ -+/*- -+ * Invertex AEON / Hifn 7751 driver -+ * Copyright (c) 1999 Invertex Inc. All rights reserved. -+ * Copyright (c) 1999 Theo de Raadt -+ * Copyright (c) 2000-2001 Network Security Technologies, Inc. -+ * http://www.netsec.net -+ * Copyright (c) 2003 Hifn Inc. -+ * -+ * This driver is based on a previous driver by Invertex, for which they -+ * requested: Please send any comments, feedback, bug-fixes, or feature -+ * requests to software@invertex.com. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The name of the author may not be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * Effort sponsored in part by the Defense Advanced Research Projects -+ * Agency (DARPA) and Air Force Research Laboratory, Air Force -+ * Materiel Command, USAF, under agreement number F30602-01-2-0537. -+ * -+ * -+__FBSDID("$FreeBSD: src/sys/dev/hifn/hifn7751.c,v 1.40 2007/03/21 03:42:49 sam Exp $"); -+ */ -+ -+/* -+ * Driver for various Hifn encryption processors. -+ */ -+#ifndef AUTOCONF_INCLUDED -+#include <linux/config.h> -+#endif -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/list.h> -+#include <linux/slab.h> -+#include <linux/wait.h> -+#include <linux/sched.h> -+#include <linux/pci.h> -+#include <linux/delay.h> -+#include <linux/interrupt.h> -+#include <linux/spinlock.h> -+#include <linux/random.h> -+#include <linux/version.h> -+#include <linux/skbuff.h> -+#include <asm/io.h> -+ -+#include <cryptodev.h> -+#include <uio.h> -+#include <hifn/hifn7751reg.h> -+#include <hifn/hifn7751var.h> -+ -+#if 1 -+#define DPRINTF(a...) if (hifn_debug) { \ -+ printk("%s: ", sc ? \ -+ device_get_nameunit(sc->sc_dev) : "hifn"); \ -+ printk(a); \ -+ } else -+#else -+#define DPRINTF(a...) -+#endif -+ -+static inline int -+pci_get_revid(struct pci_dev *dev) -+{ -+ u8 rid = 0; -+ pci_read_config_byte(dev, PCI_REVISION_ID, &rid); -+ return rid; -+} -+ -+static struct hifn_stats hifnstats; -+ -+#define debug hifn_debug -+int hifn_debug = 0; -+module_param(hifn_debug, int, 0644); -+MODULE_PARM_DESC(hifn_debug, "Enable debug"); -+ -+int hifn_maxbatch = 1; -+module_param(hifn_maxbatch, int, 0644); -+MODULE_PARM_DESC(hifn_maxbatch, "max ops to batch w/o interrupt"); -+ -+#ifdef MODULE_PARM -+char *hifn_pllconfig = NULL; -+MODULE_PARM(hifn_pllconfig, "s"); -+#else -+char hifn_pllconfig[32]; /* This setting is RO after loading */ -+module_param_string(hifn_pllconfig, hifn_pllconfig, 32, 0444); -+#endif -+MODULE_PARM_DESC(hifn_pllconfig, "PLL config, ie., pci66, ext33, ..."); -+ -+#ifdef HIFN_VULCANDEV -+#include <sys/conf.h> -+#include <sys/uio.h> -+ -+static struct cdevsw vulcanpk_cdevsw; /* forward declaration */ -+#endif -+ -+/* -+ * Prototypes and count for the pci_device structure -+ */ -+static int hifn_probe(struct pci_dev *dev, const struct pci_device_id *ent); -+static void hifn_remove(struct pci_dev *dev); -+ -+static int hifn_newsession(device_t, u_int32_t *, struct cryptoini *); -+static int hifn_freesession(device_t, u_int64_t); -+static int hifn_process(device_t, struct cryptop *, int); -+ -+static device_method_t hifn_methods = { -+ /* crypto device methods */ -+ DEVMETHOD(cryptodev_newsession, hifn_newsession), -+ DEVMETHOD(cryptodev_freesession,hifn_freesession), -+ DEVMETHOD(cryptodev_process, hifn_process), -+}; -+ -+static void hifn_reset_board(struct hifn_softc *, int); -+static void hifn_reset_puc(struct hifn_softc *); -+static void hifn_puc_wait(struct hifn_softc *); -+static int hifn_enable_crypto(struct hifn_softc *); -+static void hifn_set_retry(struct hifn_softc *sc); -+static void hifn_init_dma(struct hifn_softc *); -+static void hifn_init_pci_registers(struct hifn_softc *); -+static int hifn_sramsize(struct hifn_softc *); -+static int hifn_dramsize(struct hifn_softc *); -+static int hifn_ramtype(struct hifn_softc *); -+static void hifn_sessions(struct hifn_softc *); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) -+static irqreturn_t hifn_intr(int irq, void *arg); -+#else -+static irqreturn_t hifn_intr(int irq, void *arg, struct pt_regs *regs); -+#endif -+static u_int hifn_write_command(struct hifn_command *, u_int8_t *); -+static u_int32_t hifn_next_signature(u_int32_t a, u_int cnt); -+static void hifn_callback(struct hifn_softc *, struct hifn_command *, u_int8_t *); -+static int hifn_crypto(struct hifn_softc *, struct hifn_command *, struct cryptop *, int); -+static int hifn_readramaddr(struct hifn_softc *, int, u_int8_t *); -+static int hifn_writeramaddr(struct hifn_softc *, int, u_int8_t *); -+static int hifn_dmamap_load_src(struct hifn_softc *, struct hifn_command *); -+static int hifn_dmamap_load_dst(struct hifn_softc *, struct hifn_command *); -+static int hifn_init_pubrng(struct hifn_softc *); -+static void hifn_tick(unsigned long arg); -+static void hifn_abort(struct hifn_softc *); -+static void hifn_alloc_slot(struct hifn_softc *, int *, int *, int *, int *); -+ -+static void hifn_write_reg_0(struct hifn_softc *, bus_size_t, u_int32_t); -+static void hifn_write_reg_1(struct hifn_softc *, bus_size_t, u_int32_t); -+ -+#ifdef CONFIG_OCF_RANDOMHARVEST -+static int hifn_read_random(void *arg, u_int32_t *buf, int len); -+#endif -+ -+#define HIFN_MAX_CHIPS 8 -+static struct hifn_softc *hifn_chip_idx[HIFN_MAX_CHIPS]; -+ -+static __inline u_int32_t -+READ_REG_0(struct hifn_softc *sc, bus_size_t reg) -+{ -+ u_int32_t v = readl(sc->sc_bar0 + reg); -+ sc->sc_bar0_lastreg = (bus_size_t) -1; -+ return (v); -+} -+#define WRITE_REG_0(sc, reg, val) hifn_write_reg_0(sc, reg, val) -+ -+static __inline u_int32_t -+READ_REG_1(struct hifn_softc *sc, bus_size_t reg) -+{ -+ u_int32_t v = readl(sc->sc_bar1 + reg); -+ sc->sc_bar1_lastreg = (bus_size_t) -1; -+ return (v); -+} -+#define WRITE_REG_1(sc, reg, val) hifn_write_reg_1(sc, reg, val) -+ -+/* -+ * map in a given buffer (great on some arches :-) -+ */ -+ -+static int -+pci_map_uio(struct hifn_softc *sc, struct hifn_operand *buf, struct uio *uio) -+{ -+ struct iovec *iov = uio->uio_iov; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ buf->mapsize = 0; -+ for (buf->nsegs = 0; buf->nsegs < uio->uio_iovcnt; ) { -+ buf->segs[buf->nsegs].ds_addr = pci_map_single(sc->sc_pcidev, -+ iov->iov_base, iov->iov_len, -+ PCI_DMA_BIDIRECTIONAL); -+ buf->segs[buf->nsegs].ds_len = iov->iov_len; -+ buf->mapsize += iov->iov_len; -+ iov++; -+ buf->nsegs++; -+ } -+ /* identify this buffer by the first segment */ -+ buf->map = (void *) buf->segs[0].ds_addr; -+ return(0); -+} -+ -+/* -+ * map in a given sk_buff -+ */ -+ -+static int -+pci_map_skb(struct hifn_softc *sc,struct hifn_operand *buf,struct sk_buff *skb) -+{ -+ int i; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ buf->mapsize = 0; -+ -+ buf->segs[0].ds_addr = pci_map_single(sc->sc_pcidev, -+ skb->data, skb_headlen(skb), PCI_DMA_BIDIRECTIONAL); -+ buf->segs[0].ds_len = skb_headlen(skb); -+ buf->mapsize += buf->segs[0].ds_len; -+ -+ buf->nsegs = 1; -+ -+ for (i = 0; i < skb_shinfo(skb)->nr_frags; ) { -+ buf->segs[buf->nsegs].ds_len = skb_shinfo(skb)->frags[i].size; -+ buf->segs[buf->nsegs].ds_addr = pci_map_single(sc->sc_pcidev, -+ page_address(skb_shinfo(skb)->frags[i].page) + -+ skb_shinfo(skb)->frags[i].page_offset, -+ buf->segs[buf->nsegs].ds_len, PCI_DMA_BIDIRECTIONAL); -+ buf->mapsize += buf->segs[buf->nsegs].ds_len; -+ buf->nsegs++; -+ } -+ -+ /* identify this buffer by the first segment */ -+ buf->map = (void *) buf->segs[0].ds_addr; -+ return(0); -+} -+ -+/* -+ * map in a given contiguous buffer -+ */ -+ -+static int -+pci_map_buf(struct hifn_softc *sc,struct hifn_operand *buf, void *b, int len) -+{ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ buf->mapsize = 0; -+ buf->segs[0].ds_addr = pci_map_single(sc->sc_pcidev, -+ b, len, PCI_DMA_BIDIRECTIONAL); -+ buf->segs[0].ds_len = len; -+ buf->mapsize += buf->segs[0].ds_len; -+ buf->nsegs = 1; -+ -+ /* identify this buffer by the first segment */ -+ buf->map = (void *) buf->segs[0].ds_addr; -+ return(0); -+} -+ -+#if 0 /* not needed at this time */ -+static void -+pci_sync_iov(struct hifn_softc *sc, struct hifn_operand *buf) -+{ -+ int i; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ for (i = 0; i < buf->nsegs; i++) -+ pci_dma_sync_single_for_cpu(sc->sc_pcidev, buf->segs[i].ds_addr, -+ buf->segs[i].ds_len, PCI_DMA_BIDIRECTIONAL); -+} -+#endif -+ -+static void -+pci_unmap_buf(struct hifn_softc *sc, struct hifn_operand *buf) -+{ -+ int i; -+ DPRINTF("%s()\n", __FUNCTION__); -+ for (i = 0; i < buf->nsegs; i++) { -+ pci_unmap_single(sc->sc_pcidev, buf->segs[i].ds_addr, -+ buf->segs[i].ds_len, PCI_DMA_BIDIRECTIONAL); -+ buf->segs[i].ds_addr = 0; -+ buf->segs[i].ds_len = 0; -+ } -+ buf->nsegs = 0; -+ buf->mapsize = 0; -+ buf->map = 0; -+} -+ -+static const char* -+hifn_partname(struct hifn_softc *sc) -+{ -+ /* XXX sprintf numbers when not decoded */ -+ switch (pci_get_vendor(sc->sc_pcidev)) { -+ case PCI_VENDOR_HIFN: -+ switch (pci_get_device(sc->sc_pcidev)) { -+ case PCI_PRODUCT_HIFN_6500: return "Hifn 6500"; -+ case PCI_PRODUCT_HIFN_7751: return "Hifn 7751"; -+ case PCI_PRODUCT_HIFN_7811: return "Hifn 7811"; -+ case PCI_PRODUCT_HIFN_7951: return "Hifn 7951"; -+ case PCI_PRODUCT_HIFN_7955: return "Hifn 7955"; -+ case PCI_PRODUCT_HIFN_7956: return "Hifn 7956"; -+ } -+ return "Hifn unknown-part"; -+ case PCI_VENDOR_INVERTEX: -+ switch (pci_get_device(sc->sc_pcidev)) { -+ case PCI_PRODUCT_INVERTEX_AEON: return "Invertex AEON"; -+ } -+ return "Invertex unknown-part"; -+ case PCI_VENDOR_NETSEC: -+ switch (pci_get_device(sc->sc_pcidev)) { -+ case PCI_PRODUCT_NETSEC_7751: return "NetSec 7751"; -+ } -+ return "NetSec unknown-part"; -+ } -+ return "Unknown-vendor unknown-part"; -+} -+ -+static u_int -+checkmaxmin(struct pci_dev *dev, const char *what, u_int v, u_int min, u_int max) -+{ -+ struct hifn_softc *sc = pci_get_drvdata(dev); -+ if (v > max) { -+ device_printf(sc->sc_dev, "Warning, %s %u out of range, " -+ "using max %u\n", what, v, max); -+ v = max; -+ } else if (v < min) { -+ device_printf(sc->sc_dev, "Warning, %s %u out of range, " -+ "using min %u\n", what, v, min); -+ v = min; -+ } -+ return v; -+} -+ -+/* -+ * Select PLL configuration for 795x parts. This is complicated in -+ * that we cannot determine the optimal parameters without user input. -+ * The reference clock is derived from an external clock through a -+ * multiplier. The external clock is either the host bus (i.e. PCI) -+ * or an external clock generator. When using the PCI bus we assume -+ * the clock is either 33 or 66 MHz; for an external source we cannot -+ * tell the speed. -+ * -+ * PLL configuration is done with a string: "pci" for PCI bus, or "ext" -+ * for an external source, followed by the frequency. We calculate -+ * the appropriate multiplier and PLL register contents accordingly. -+ * When no configuration is given we default to "pci66" since that -+ * always will allow the card to work. If a card is using the PCI -+ * bus clock and in a 33MHz slot then it will be operating at half -+ * speed until the correct information is provided. -+ * -+ * We use a default setting of "ext66" because according to Mike Ham -+ * of HiFn, almost every board in existence has an external crystal -+ * populated at 66Mhz. Using PCI can be a problem on modern motherboards, -+ * because PCI33 can have clocks from 0 to 33Mhz, and some have -+ * non-PCI-compliant spread-spectrum clocks, which can confuse the pll. -+ */ -+static void -+hifn_getpllconfig(struct pci_dev *dev, u_int *pll) -+{ -+ const char *pllspec = hifn_pllconfig; -+ u_int freq, mul, fl, fh; -+ u_int32_t pllconfig; -+ char *nxt; -+ -+ if (pllspec == NULL) -+ pllspec = "ext66"; -+ fl = 33, fh = 66; -+ pllconfig = 0; -+ if (strncmp(pllspec, "ext", 3) == 0) { -+ pllspec += 3; -+ pllconfig |= HIFN_PLL_REF_SEL; -+ switch (pci_get_device(dev)) { -+ case PCI_PRODUCT_HIFN_7955: -+ case PCI_PRODUCT_HIFN_7956: -+ fl = 20, fh = 100; -+ break; -+#ifdef notyet -+ case PCI_PRODUCT_HIFN_7954: -+ fl = 20, fh = 66; -+ break; -+#endif -+ } -+ } else if (strncmp(pllspec, "pci", 3) == 0) -+ pllspec += 3; -+ freq = strtoul(pllspec, &nxt, 10); -+ if (nxt == pllspec) -+ freq = 66; -+ else -+ freq = checkmaxmin(dev, "frequency", freq, fl, fh); -+ /* -+ * Calculate multiplier. We target a Fck of 266 MHz, -+ * allowing only even values, possibly rounded down. -+ * Multipliers > 8 must set the charge pump current. -+ */ -+ mul = checkmaxmin(dev, "PLL divisor", (266 / freq) &~ 1, 2, 12); -+ pllconfig |= (mul / 2 - 1) << HIFN_PLL_ND_SHIFT; -+ if (mul > 8) -+ pllconfig |= HIFN_PLL_IS; -+ *pll = pllconfig; -+} -+ -+/* -+ * Attach an interface that successfully probed. -+ */ -+static int -+hifn_probe(struct pci_dev *dev, const struct pci_device_id *ent) -+{ -+ struct hifn_softc *sc = NULL; -+ char rbase; -+ u_int16_t ena, rev; -+ int rseg, rc; -+ unsigned long mem_start, mem_len; -+ static int num_chips = 0; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ if (pci_enable_device(dev) < 0) -+ return(-ENODEV); -+ -+ if (pci_set_mwi(dev)) -+ return(-ENODEV); -+ -+ if (!dev->irq) { -+ printk("hifn: found device with no IRQ assigned. check BIOS settings!"); -+ pci_disable_device(dev); -+ return(-ENODEV); -+ } -+ -+ sc = (struct hifn_softc *) kmalloc(sizeof(*sc), GFP_KERNEL); -+ if (!sc) -+ return(-ENOMEM); -+ memset(sc, 0, sizeof(*sc)); -+ -+ softc_device_init(sc, "hifn", num_chips, hifn_methods); -+ -+ sc->sc_pcidev = dev; -+ sc->sc_irq = -1; -+ sc->sc_cid = -1; -+ sc->sc_num = num_chips++; -+ if (sc->sc_num < HIFN_MAX_CHIPS) -+ hifn_chip_idx[sc->sc_num] = sc; -+ -+ pci_set_drvdata(sc->sc_pcidev, sc); -+ -+ spin_lock_init(&sc->sc_mtx); -+ -+ /* XXX handle power management */ -+ -+ /* -+ * The 7951 and 795x have a random number generator and -+ * public key support; note this. -+ */ -+ if (pci_get_vendor(dev) == PCI_VENDOR_HIFN && -+ (pci_get_device(dev) == PCI_PRODUCT_HIFN_7951 || -+ pci_get_device(dev) == PCI_PRODUCT_HIFN_7955 || -+ pci_get_device(dev) == PCI_PRODUCT_HIFN_7956)) -+ sc->sc_flags = HIFN_HAS_RNG | HIFN_HAS_PUBLIC; -+ /* -+ * The 7811 has a random number generator and -+ * we also note it's identity 'cuz of some quirks. -+ */ -+ if (pci_get_vendor(dev) == PCI_VENDOR_HIFN && -+ pci_get_device(dev) == PCI_PRODUCT_HIFN_7811) -+ sc->sc_flags |= HIFN_IS_7811 | HIFN_HAS_RNG; -+ -+ /* -+ * The 795x parts support AES. -+ */ -+ if (pci_get_vendor(dev) == PCI_VENDOR_HIFN && -+ (pci_get_device(dev) == PCI_PRODUCT_HIFN_7955 || -+ pci_get_device(dev) == PCI_PRODUCT_HIFN_7956)) { -+ sc->sc_flags |= HIFN_IS_7956 | HIFN_HAS_AES; -+ /* -+ * Select PLL configuration. This depends on the -+ * bus and board design and must be manually configured -+ * if the default setting is unacceptable. -+ */ -+ hifn_getpllconfig(dev, &sc->sc_pllconfig); -+ } -+ -+ /* -+ * Setup PCI resources. Note that we record the bus -+ * tag and handle for each register mapping, this is -+ * used by the READ_REG_0, WRITE_REG_0, READ_REG_1, -+ * and WRITE_REG_1 macros throughout the driver. -+ */ -+ mem_start = pci_resource_start(sc->sc_pcidev, 0); -+ mem_len = pci_resource_len(sc->sc_pcidev, 0); -+ sc->sc_bar0 = (ocf_iomem_t) ioremap(mem_start, mem_len); -+ if (!sc->sc_bar0) { -+ device_printf(sc->sc_dev, "cannot map bar%d register space\n", 0); -+ goto fail; -+ } -+ sc->sc_bar0_lastreg = (bus_size_t) -1; -+ -+ mem_start = pci_resource_start(sc->sc_pcidev, 1); -+ mem_len = pci_resource_len(sc->sc_pcidev, 1); -+ sc->sc_bar1 = (ocf_iomem_t) ioremap(mem_start, mem_len); -+ if (!sc->sc_bar1) { -+ device_printf(sc->sc_dev, "cannot map bar%d register space\n", 1); -+ goto fail; -+ } -+ sc->sc_bar1_lastreg = (bus_size_t) -1; -+ -+ /* fix up the bus size */ -+ if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) { -+ device_printf(sc->sc_dev, "No usable DMA configuration, aborting.\n"); -+ goto fail; -+ } -+ if (pci_set_consistent_dma_mask(dev, DMA_32BIT_MASK)) { -+ device_printf(sc->sc_dev, -+ "No usable consistent DMA configuration, aborting.\n"); -+ goto fail; -+ } -+ -+ hifn_set_retry(sc); -+ -+ /* -+ * Setup the area where the Hifn DMA's descriptors -+ * and associated data structures. -+ */ -+ sc->sc_dma = (struct hifn_dma *) pci_alloc_consistent(dev, -+ sizeof(*sc->sc_dma), -+ &sc->sc_dma_physaddr); -+ if (!sc->sc_dma) { -+ device_printf(sc->sc_dev, "cannot alloc sc_dma\n"); -+ goto fail; -+ } -+ bzero(sc->sc_dma, sizeof(*sc->sc_dma)); -+ -+ /* -+ * Reset the board and do the ``secret handshake'' -+ * to enable the crypto support. Then complete the -+ * initialization procedure by setting up the interrupt -+ * and hooking in to the system crypto support so we'll -+ * get used for system services like the crypto device, -+ * IPsec, RNG device, etc. -+ */ -+ hifn_reset_board(sc, 0); -+ -+ if (hifn_enable_crypto(sc) != 0) { -+ device_printf(sc->sc_dev, "crypto enabling failed\n"); -+ goto fail; -+ } -+ hifn_reset_puc(sc); -+ -+ hifn_init_dma(sc); -+ hifn_init_pci_registers(sc); -+ -+ pci_set_master(sc->sc_pcidev); -+ -+ /* XXX can't dynamically determine ram type for 795x; force dram */ -+ if (sc->sc_flags & HIFN_IS_7956) -+ sc->sc_drammodel = 1; -+ else if (hifn_ramtype(sc)) -+ goto fail; -+ -+ if (sc->sc_drammodel == 0) -+ hifn_sramsize(sc); -+ else -+ hifn_dramsize(sc); -+ -+ /* -+ * Workaround for NetSec 7751 rev A: half ram size because two -+ * of the address lines were left floating -+ */ -+ if (pci_get_vendor(dev) == PCI_VENDOR_NETSEC && -+ pci_get_device(dev) == PCI_PRODUCT_NETSEC_7751 && -+ pci_get_revid(dev) == 0x61) /*XXX???*/ -+ sc->sc_ramsize >>= 1; -+ -+ /* -+ * Arrange the interrupt line. -+ */ -+ rc = request_irq(dev->irq, hifn_intr, IRQF_SHARED, "hifn", sc); -+ if (rc) { -+ device_printf(sc->sc_dev, "could not map interrupt: %d\n", rc); -+ goto fail; -+ } -+ sc->sc_irq = dev->irq; -+ -+ hifn_sessions(sc); -+ -+ /* -+ * NB: Keep only the low 16 bits; this masks the chip id -+ * from the 7951. -+ */ -+ rev = READ_REG_1(sc, HIFN_1_REVID) & 0xffff; -+ -+ rseg = sc->sc_ramsize / 1024; -+ rbase = 'K'; -+ if (sc->sc_ramsize >= (1024 * 1024)) { -+ rbase = 'M'; -+ rseg /= 1024; -+ } -+ device_printf(sc->sc_dev, "%s, rev %u, %d%cB %cram", -+ hifn_partname(sc), rev, -+ rseg, rbase, sc->sc_drammodel ? 'd' : 's'); -+ if (sc->sc_flags & HIFN_IS_7956) -+ printf(", pll=0x%x<%s clk, %ux mult>", -+ sc->sc_pllconfig, -+ sc->sc_pllconfig & HIFN_PLL_REF_SEL ? "ext" : "pci", -+ 2 + 2*((sc->sc_pllconfig & HIFN_PLL_ND) >> 11)); -+ printf("\n"); -+ -+ sc->sc_cid = crypto_get_driverid(softc_get_device(sc),CRYPTOCAP_F_HARDWARE); -+ if (sc->sc_cid < 0) { -+ device_printf(sc->sc_dev, "could not get crypto driver id\n"); -+ goto fail; -+ } -+ -+ WRITE_REG_0(sc, HIFN_0_PUCNFG, -+ READ_REG_0(sc, HIFN_0_PUCNFG) | HIFN_PUCNFG_CHIPID); -+ ena = READ_REG_0(sc, HIFN_0_PUSTAT) & HIFN_PUSTAT_CHIPENA; -+ -+ switch (ena) { -+ case HIFN_PUSTAT_ENA_2: -+ crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0); -+ crypto_register(sc->sc_cid, CRYPTO_ARC4, 0, 0); -+ if (sc->sc_flags & HIFN_HAS_AES) -+ crypto_register(sc->sc_cid, CRYPTO_AES_CBC, 0, 0); -+ /*FALLTHROUGH*/ -+ case HIFN_PUSTAT_ENA_1: -+ crypto_register(sc->sc_cid, CRYPTO_MD5, 0, 0); -+ crypto_register(sc->sc_cid, CRYPTO_SHA1, 0, 0); -+ crypto_register(sc->sc_cid, CRYPTO_MD5_HMAC, 0, 0); -+ crypto_register(sc->sc_cid, CRYPTO_SHA1_HMAC, 0, 0); -+ crypto_register(sc->sc_cid, CRYPTO_DES_CBC, 0, 0); -+ break; -+ } -+ -+ if (sc->sc_flags & (HIFN_HAS_PUBLIC | HIFN_HAS_RNG)) -+ hifn_init_pubrng(sc); -+ -+ init_timer(&sc->sc_tickto); -+ sc->sc_tickto.function = hifn_tick; -+ sc->sc_tickto.data = (unsigned long) sc->sc_num; -+ mod_timer(&sc->sc_tickto, jiffies + HZ); -+ -+ return (0); -+ -+fail: -+ if (sc->sc_cid >= 0) -+ crypto_unregister_all(sc->sc_cid); -+ if (sc->sc_irq != -1) -+ free_irq(sc->sc_irq, sc); -+ if (sc->sc_dma) { -+ /* Turn off DMA polling */ -+ WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | -+ HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); -+ -+ pci_free_consistent(sc->sc_pcidev, -+ sizeof(*sc->sc_dma), -+ sc->sc_dma, sc->sc_dma_physaddr); -+ } -+ kfree(sc); -+ return (-ENXIO); -+} -+ -+/* -+ * Detach an interface that successfully probed. -+ */ -+static void -+hifn_remove(struct pci_dev *dev) -+{ -+ struct hifn_softc *sc = pci_get_drvdata(dev); -+ unsigned long l_flags; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ KASSERT(sc != NULL, ("hifn_detach: null software carrier!")); -+ -+ /* disable interrupts */ -+ HIFN_LOCK(sc); -+ WRITE_REG_1(sc, HIFN_1_DMA_IER, 0); -+ HIFN_UNLOCK(sc); -+ -+ /*XXX other resources */ -+ del_timer_sync(&sc->sc_tickto); -+ -+ /* Turn off DMA polling */ -+ WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | -+ HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); -+ -+ crypto_unregister_all(sc->sc_cid); -+ -+ free_irq(sc->sc_irq, sc); -+ -+ pci_free_consistent(sc->sc_pcidev, sizeof(*sc->sc_dma), -+ sc->sc_dma, sc->sc_dma_physaddr); -+} -+ -+ -+static int -+hifn_init_pubrng(struct hifn_softc *sc) -+{ -+ int i; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ if ((sc->sc_flags & HIFN_IS_7811) == 0) { -+ /* Reset 7951 public key/rng engine */ -+ WRITE_REG_1(sc, HIFN_1_PUB_RESET, -+ READ_REG_1(sc, HIFN_1_PUB_RESET) | HIFN_PUBRST_RESET); -+ -+ for (i = 0; i < 100; i++) { -+ DELAY(1000); -+ if ((READ_REG_1(sc, HIFN_1_PUB_RESET) & -+ HIFN_PUBRST_RESET) == 0) -+ break; -+ } -+ -+ if (i == 100) { -+ device_printf(sc->sc_dev, "public key init failed\n"); -+ return (1); -+ } -+ } -+ -+ /* Enable the rng, if available */ -+#ifdef CONFIG_OCF_RANDOMHARVEST -+ if (sc->sc_flags & HIFN_HAS_RNG) { -+ if (sc->sc_flags & HIFN_IS_7811) { -+ u_int32_t r; -+ r = READ_REG_1(sc, HIFN_1_7811_RNGENA); -+ if (r & HIFN_7811_RNGENA_ENA) { -+ r &= ~HIFN_7811_RNGENA_ENA; -+ WRITE_REG_1(sc, HIFN_1_7811_RNGENA, r); -+ } -+ WRITE_REG_1(sc, HIFN_1_7811_RNGCFG, -+ HIFN_7811_RNGCFG_DEFL); -+ r |= HIFN_7811_RNGENA_ENA; -+ WRITE_REG_1(sc, HIFN_1_7811_RNGENA, r); -+ } else -+ WRITE_REG_1(sc, HIFN_1_RNG_CONFIG, -+ READ_REG_1(sc, HIFN_1_RNG_CONFIG) | -+ HIFN_RNGCFG_ENA); -+ -+ sc->sc_rngfirst = 1; -+ crypto_rregister(sc->sc_cid, hifn_read_random, sc); -+ } -+#endif -+ -+ /* Enable public key engine, if available */ -+ if (sc->sc_flags & HIFN_HAS_PUBLIC) { -+ WRITE_REG_1(sc, HIFN_1_PUB_IEN, HIFN_PUBIEN_DONE); -+ sc->sc_dmaier |= HIFN_DMAIER_PUBDONE; -+ WRITE_REG_1(sc, HIFN_1_DMA_IER, sc->sc_dmaier); -+#ifdef HIFN_VULCANDEV -+ sc->sc_pkdev = make_dev(&vulcanpk_cdevsw, 0, -+ UID_ROOT, GID_WHEEL, 0666, -+ "vulcanpk"); -+ sc->sc_pkdev->si_drv1 = sc; -+#endif -+ } -+ -+ return (0); -+} -+ -+#ifdef CONFIG_OCF_RANDOMHARVEST -+static int -+hifn_read_random(void *arg, u_int32_t *buf, int len) -+{ -+ struct hifn_softc *sc = (struct hifn_softc *) arg; -+ u_int32_t sts; -+ int i, rc = 0; -+ -+ if (len <= 0) -+ return rc; -+ -+ if (sc->sc_flags & HIFN_IS_7811) { -+ /* ONLY VALID ON 7811!!!! */ -+ for (i = 0; i < 5; i++) { -+ sts = READ_REG_1(sc, HIFN_1_7811_RNGSTS); -+ if (sts & HIFN_7811_RNGSTS_UFL) { -+ device_printf(sc->sc_dev, -+ "RNG underflow: disabling\n"); -+ /* DAVIDM perhaps return -1 */ -+ break; -+ } -+ if ((sts & HIFN_7811_RNGSTS_RDY) == 0) -+ break; -+ -+ /* -+ * There are at least two words in the RNG FIFO -+ * at this point. -+ */ -+ if (rc < len) -+ buf[rc++] = READ_REG_1(sc, HIFN_1_7811_RNGDAT); -+ if (rc < len) -+ buf[rc++] = READ_REG_1(sc, HIFN_1_7811_RNGDAT); -+ } -+ } else -+ buf[rc++] = READ_REG_1(sc, HIFN_1_RNG_DATA); -+ -+ /* NB: discard first data read */ -+ if (sc->sc_rngfirst) { -+ sc->sc_rngfirst = 0; -+ rc = 0; -+ } -+ -+ return(rc); -+} -+#endif /* CONFIG_OCF_RANDOMHARVEST */ -+ -+static void -+hifn_puc_wait(struct hifn_softc *sc) -+{ -+ int i; -+ int reg = HIFN_0_PUCTRL; -+ -+ if (sc->sc_flags & HIFN_IS_7956) { -+ reg = HIFN_0_PUCTRL2; -+ } -+ -+ for (i = 5000; i > 0; i--) { -+ DELAY(1); -+ if (!(READ_REG_0(sc, reg) & HIFN_PUCTRL_RESET)) -+ break; -+ } -+ if (!i) -+ device_printf(sc->sc_dev, "proc unit did not reset(0x%x)\n", -+ READ_REG_0(sc, HIFN_0_PUCTRL)); -+} -+ -+/* -+ * Reset the processing unit. -+ */ -+static void -+hifn_reset_puc(struct hifn_softc *sc) -+{ -+ /* Reset processing unit */ -+ int reg = HIFN_0_PUCTRL; -+ -+ if (sc->sc_flags & HIFN_IS_7956) { -+ reg = HIFN_0_PUCTRL2; -+ } -+ WRITE_REG_0(sc, reg, HIFN_PUCTRL_DMAENA); -+ -+ hifn_puc_wait(sc); -+} -+ -+/* -+ * Set the Retry and TRDY registers; note that we set them to -+ * zero because the 7811 locks up when forced to retry (section -+ * 3.6 of "Specification Update SU-0014-04". Not clear if we -+ * should do this for all Hifn parts, but it doesn't seem to hurt. -+ */ -+static void -+hifn_set_retry(struct hifn_softc *sc) -+{ -+ DPRINTF("%s()\n", __FUNCTION__); -+ /* NB: RETRY only responds to 8-bit reads/writes */ -+ pci_write_config_byte(sc->sc_pcidev, HIFN_RETRY_TIMEOUT, 0); -+ pci_write_config_dword(sc->sc_pcidev, HIFN_TRDY_TIMEOUT, 0); -+} -+ -+/* -+ * Resets the board. Values in the regesters are left as is -+ * from the reset (i.e. initial values are assigned elsewhere). -+ */ -+static void -+hifn_reset_board(struct hifn_softc *sc, int full) -+{ -+ u_int32_t reg; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ /* -+ * Set polling in the DMA configuration register to zero. 0x7 avoids -+ * resetting the board and zeros out the other fields. -+ */ -+ WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | -+ HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); -+ -+ /* -+ * Now that polling has been disabled, we have to wait 1 ms -+ * before resetting the board. -+ */ -+ DELAY(1000); -+ -+ /* Reset the DMA unit */ -+ if (full) { -+ WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MODE); -+ DELAY(1000); -+ } else { -+ WRITE_REG_1(sc, HIFN_1_DMA_CNFG, -+ HIFN_DMACNFG_MODE | HIFN_DMACNFG_MSTRESET); -+ hifn_reset_puc(sc); -+ } -+ -+ KASSERT(sc->sc_dma != NULL, ("hifn_reset_board: null DMA tag!")); -+ bzero(sc->sc_dma, sizeof(*sc->sc_dma)); -+ -+ /* Bring dma unit out of reset */ -+ WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | -+ HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); -+ -+ hifn_puc_wait(sc); -+ hifn_set_retry(sc); -+ -+ if (sc->sc_flags & HIFN_IS_7811) { -+ for (reg = 0; reg < 1000; reg++) { -+ if (READ_REG_1(sc, HIFN_1_7811_MIPSRST) & -+ HIFN_MIPSRST_CRAMINIT) -+ break; -+ DELAY(1000); -+ } -+ if (reg == 1000) -+ device_printf(sc->sc_dev, ": cram init timeout\n"); -+ } else { -+ /* set up DMA configuration register #2 */ -+ /* turn off all PK and BAR0 swaps */ -+ WRITE_REG_1(sc, HIFN_1_DMA_CNFG2, -+ (3 << HIFN_DMACNFG2_INIT_WRITE_BURST_SHIFT)| -+ (3 << HIFN_DMACNFG2_INIT_READ_BURST_SHIFT)| -+ (2 << HIFN_DMACNFG2_TGT_WRITE_BURST_SHIFT)| -+ (2 << HIFN_DMACNFG2_TGT_READ_BURST_SHIFT)); -+ } -+} -+ -+static u_int32_t -+hifn_next_signature(u_int32_t a, u_int cnt) -+{ -+ int i; -+ u_int32_t v; -+ -+ for (i = 0; i < cnt; i++) { -+ -+ /* get the parity */ -+ v = a & 0x80080125; -+ v ^= v >> 16; -+ v ^= v >> 8; -+ v ^= v >> 4; -+ v ^= v >> 2; -+ v ^= v >> 1; -+ -+ a = (v & 1) ^ (a << 1); -+ } -+ -+ return a; -+} -+ -+ -+/* -+ * Checks to see if crypto is already enabled. If crypto isn't enable, -+ * "hifn_enable_crypto" is called to enable it. The check is important, -+ * as enabling crypto twice will lock the board. -+ */ -+static int -+hifn_enable_crypto(struct hifn_softc *sc) -+{ -+ u_int32_t dmacfg, ramcfg, encl, addr, i; -+ char offtbl[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -+ 0x00, 0x00, 0x00, 0x00 }; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ ramcfg = READ_REG_0(sc, HIFN_0_PUCNFG); -+ dmacfg = READ_REG_1(sc, HIFN_1_DMA_CNFG); -+ -+ /* -+ * The RAM config register's encrypt level bit needs to be set before -+ * every read performed on the encryption level register. -+ */ -+ WRITE_REG_0(sc, HIFN_0_PUCNFG, ramcfg | HIFN_PUCNFG_CHIPID); -+ -+ encl = READ_REG_0(sc, HIFN_0_PUSTAT) & HIFN_PUSTAT_CHIPENA; -+ -+ /* -+ * Make sure we don't re-unlock. Two unlocks kills chip until the -+ * next reboot. -+ */ -+ if (encl == HIFN_PUSTAT_ENA_1 || encl == HIFN_PUSTAT_ENA_2) { -+#ifdef HIFN_DEBUG -+ if (hifn_debug) -+ device_printf(sc->sc_dev, -+ "Strong crypto already enabled!\n"); -+#endif -+ goto report; -+ } -+ -+ if (encl != 0 && encl != HIFN_PUSTAT_ENA_0) { -+#ifdef HIFN_DEBUG -+ if (hifn_debug) -+ device_printf(sc->sc_dev, -+ "Unknown encryption level 0x%x\n", encl); -+#endif -+ return 1; -+ } -+ -+ WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_UNLOCK | -+ HIFN_DMACNFG_MSTRESET | HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); -+ DELAY(1000); -+ addr = READ_REG_1(sc, HIFN_UNLOCK_SECRET1); -+ DELAY(1000); -+ WRITE_REG_1(sc, HIFN_UNLOCK_SECRET2, 0); -+ DELAY(1000); -+ -+ for (i = 0; i <= 12; i++) { -+ addr = hifn_next_signature(addr, offtbl[i] + 0x101); -+ WRITE_REG_1(sc, HIFN_UNLOCK_SECRET2, addr); -+ -+ DELAY(1000); -+ } -+ -+ WRITE_REG_0(sc, HIFN_0_PUCNFG, ramcfg | HIFN_PUCNFG_CHIPID); -+ encl = READ_REG_0(sc, HIFN_0_PUSTAT) & HIFN_PUSTAT_CHIPENA; -+ -+#ifdef HIFN_DEBUG -+ if (hifn_debug) { -+ if (encl != HIFN_PUSTAT_ENA_1 && encl != HIFN_PUSTAT_ENA_2) -+ device_printf(sc->sc_dev, "Engine is permanently " -+ "locked until next system reset!\n"); -+ else -+ device_printf(sc->sc_dev, "Engine enabled " -+ "successfully!\n"); -+ } -+#endif -+ -+report: -+ WRITE_REG_0(sc, HIFN_0_PUCNFG, ramcfg); -+ WRITE_REG_1(sc, HIFN_1_DMA_CNFG, dmacfg); -+ -+ switch (encl) { -+ case HIFN_PUSTAT_ENA_1: -+ case HIFN_PUSTAT_ENA_2: -+ break; -+ case HIFN_PUSTAT_ENA_0: -+ default: -+ device_printf(sc->sc_dev, "disabled\n"); -+ break; -+ } -+ -+ return 0; -+} -+ -+/* -+ * Give initial values to the registers listed in the "Register Space" -+ * section of the HIFN Software Development reference manual. -+ */ -+static void -+hifn_init_pci_registers(struct hifn_softc *sc) -+{ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ /* write fixed values needed by the Initialization registers */ -+ WRITE_REG_0(sc, HIFN_0_PUCTRL, HIFN_PUCTRL_DMAENA); -+ WRITE_REG_0(sc, HIFN_0_FIFOCNFG, HIFN_FIFOCNFG_THRESHOLD); -+ WRITE_REG_0(sc, HIFN_0_PUIER, HIFN_PUIER_DSTOVER); -+ -+ /* write all 4 ring address registers */ -+ WRITE_REG_1(sc, HIFN_1_DMA_CRAR, sc->sc_dma_physaddr + -+ offsetof(struct hifn_dma, cmdr[0])); -+ WRITE_REG_1(sc, HIFN_1_DMA_SRAR, sc->sc_dma_physaddr + -+ offsetof(struct hifn_dma, srcr[0])); -+ WRITE_REG_1(sc, HIFN_1_DMA_DRAR, sc->sc_dma_physaddr + -+ offsetof(struct hifn_dma, dstr[0])); -+ WRITE_REG_1(sc, HIFN_1_DMA_RRAR, sc->sc_dma_physaddr + -+ offsetof(struct hifn_dma, resr[0])); -+ -+ DELAY(2000); -+ -+ /* write status register */ -+ WRITE_REG_1(sc, HIFN_1_DMA_CSR, -+ HIFN_DMACSR_D_CTRL_DIS | HIFN_DMACSR_R_CTRL_DIS | -+ HIFN_DMACSR_S_CTRL_DIS | HIFN_DMACSR_C_CTRL_DIS | -+ HIFN_DMACSR_D_ABORT | HIFN_DMACSR_D_DONE | HIFN_DMACSR_D_LAST | -+ HIFN_DMACSR_D_WAIT | HIFN_DMACSR_D_OVER | -+ HIFN_DMACSR_R_ABORT | HIFN_DMACSR_R_DONE | HIFN_DMACSR_R_LAST | -+ HIFN_DMACSR_R_WAIT | HIFN_DMACSR_R_OVER | -+ HIFN_DMACSR_S_ABORT | HIFN_DMACSR_S_DONE | HIFN_DMACSR_S_LAST | -+ HIFN_DMACSR_S_WAIT | -+ HIFN_DMACSR_C_ABORT | HIFN_DMACSR_C_DONE | HIFN_DMACSR_C_LAST | -+ HIFN_DMACSR_C_WAIT | -+ HIFN_DMACSR_ENGINE | -+ ((sc->sc_flags & HIFN_HAS_PUBLIC) ? -+ HIFN_DMACSR_PUBDONE : 0) | -+ ((sc->sc_flags & HIFN_IS_7811) ? -+ HIFN_DMACSR_ILLW | HIFN_DMACSR_ILLR : 0)); -+ -+ sc->sc_d_busy = sc->sc_r_busy = sc->sc_s_busy = sc->sc_c_busy = 0; -+ sc->sc_dmaier |= HIFN_DMAIER_R_DONE | HIFN_DMAIER_C_ABORT | -+ HIFN_DMAIER_D_OVER | HIFN_DMAIER_R_OVER | -+ HIFN_DMAIER_S_ABORT | HIFN_DMAIER_D_ABORT | HIFN_DMAIER_R_ABORT | -+ ((sc->sc_flags & HIFN_IS_7811) ? -+ HIFN_DMAIER_ILLW | HIFN_DMAIER_ILLR : 0); -+ sc->sc_dmaier &= ~HIFN_DMAIER_C_WAIT; -+ WRITE_REG_1(sc, HIFN_1_DMA_IER, sc->sc_dmaier); -+ -+ -+ if (sc->sc_flags & HIFN_IS_7956) { -+ u_int32_t pll; -+ -+ WRITE_REG_0(sc, HIFN_0_PUCNFG, HIFN_PUCNFG_COMPSING | -+ HIFN_PUCNFG_TCALLPHASES | -+ HIFN_PUCNFG_TCDRVTOTEM | HIFN_PUCNFG_BUS32); -+ -+ /* turn off the clocks and insure bypass is set */ -+ pll = READ_REG_1(sc, HIFN_1_PLL); -+ pll = (pll &~ (HIFN_PLL_PK_CLK_SEL | HIFN_PLL_PE_CLK_SEL)) -+ | HIFN_PLL_BP | HIFN_PLL_MBSET; -+ WRITE_REG_1(sc, HIFN_1_PLL, pll); -+ DELAY(10*1000); /* 10ms */ -+ -+ /* change configuration */ -+ pll = (pll &~ HIFN_PLL_CONFIG) | sc->sc_pllconfig; -+ WRITE_REG_1(sc, HIFN_1_PLL, pll); -+ DELAY(10*1000); /* 10ms */ -+ -+ /* disable bypass */ -+ pll &= ~HIFN_PLL_BP; -+ WRITE_REG_1(sc, HIFN_1_PLL, pll); -+ /* enable clocks with new configuration */ -+ pll |= HIFN_PLL_PK_CLK_SEL | HIFN_PLL_PE_CLK_SEL; -+ WRITE_REG_1(sc, HIFN_1_PLL, pll); -+ } else { -+ WRITE_REG_0(sc, HIFN_0_PUCNFG, HIFN_PUCNFG_COMPSING | -+ HIFN_PUCNFG_DRFR_128 | HIFN_PUCNFG_TCALLPHASES | -+ HIFN_PUCNFG_TCDRVTOTEM | HIFN_PUCNFG_BUS32 | -+ (sc->sc_drammodel ? HIFN_PUCNFG_DRAM : HIFN_PUCNFG_SRAM)); -+ } -+ -+ WRITE_REG_0(sc, HIFN_0_PUISR, HIFN_PUISR_DSTOVER); -+ WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | -+ HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE | HIFN_DMACNFG_LAST | -+ ((HIFN_POLL_FREQUENCY << 16 ) & HIFN_DMACNFG_POLLFREQ) | -+ ((HIFN_POLL_SCALAR << 8) & HIFN_DMACNFG_POLLINVAL)); -+} -+ -+/* -+ * The maximum number of sessions supported by the card -+ * is dependent on the amount of context ram, which -+ * encryption algorithms are enabled, and how compression -+ * is configured. This should be configured before this -+ * routine is called. -+ */ -+static void -+hifn_sessions(struct hifn_softc *sc) -+{ -+ u_int32_t pucnfg; -+ int ctxsize; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ pucnfg = READ_REG_0(sc, HIFN_0_PUCNFG); -+ -+ if (pucnfg & HIFN_PUCNFG_COMPSING) { -+ if (pucnfg & HIFN_PUCNFG_ENCCNFG) -+ ctxsize = 128; -+ else -+ ctxsize = 512; -+ /* -+ * 7955/7956 has internal context memory of 32K -+ */ -+ if (sc->sc_flags & HIFN_IS_7956) -+ sc->sc_maxses = 32768 / ctxsize; -+ else -+ sc->sc_maxses = 1 + -+ ((sc->sc_ramsize - 32768) / ctxsize); -+ } else -+ sc->sc_maxses = sc->sc_ramsize / 16384; -+ -+ if (sc->sc_maxses > 2048) -+ sc->sc_maxses = 2048; -+} -+ -+/* -+ * Determine ram type (sram or dram). Board should be just out of a reset -+ * state when this is called. -+ */ -+static int -+hifn_ramtype(struct hifn_softc *sc) -+{ -+ u_int8_t data[8], dataexpect[8]; -+ int i; -+ -+ for (i = 0; i < sizeof(data); i++) -+ data[i] = dataexpect[i] = 0x55; -+ if (hifn_writeramaddr(sc, 0, data)) -+ return (-1); -+ if (hifn_readramaddr(sc, 0, data)) -+ return (-1); -+ if (bcmp(data, dataexpect, sizeof(data)) != 0) { -+ sc->sc_drammodel = 1; -+ return (0); -+ } -+ -+ for (i = 0; i < sizeof(data); i++) -+ data[i] = dataexpect[i] = 0xaa; -+ if (hifn_writeramaddr(sc, 0, data)) -+ return (-1); -+ if (hifn_readramaddr(sc, 0, data)) -+ return (-1); -+ if (bcmp(data, dataexpect, sizeof(data)) != 0) { -+ sc->sc_drammodel = 1; -+ return (0); -+ } -+ -+ return (0); -+} -+ -+#define HIFN_SRAM_MAX (32 << 20) -+#define HIFN_SRAM_STEP_SIZE 16384 -+#define HIFN_SRAM_GRANULARITY (HIFN_SRAM_MAX / HIFN_SRAM_STEP_SIZE) -+ -+static int -+hifn_sramsize(struct hifn_softc *sc) -+{ -+ u_int32_t a; -+ u_int8_t data[8]; -+ u_int8_t dataexpect[sizeof(data)]; -+ int32_t i; -+ -+ for (i = 0; i < sizeof(data); i++) -+ data[i] = dataexpect[i] = i ^ 0x5a; -+ -+ for (i = HIFN_SRAM_GRANULARITY - 1; i >= 0; i--) { -+ a = i * HIFN_SRAM_STEP_SIZE; -+ bcopy(&i, data, sizeof(i)); -+ hifn_writeramaddr(sc, a, data); -+ } -+ -+ for (i = 0; i < HIFN_SRAM_GRANULARITY; i++) { -+ a = i * HIFN_SRAM_STEP_SIZE; -+ bcopy(&i, dataexpect, sizeof(i)); -+ if (hifn_readramaddr(sc, a, data) < 0) -+ return (0); -+ if (bcmp(data, dataexpect, sizeof(data)) != 0) -+ return (0); -+ sc->sc_ramsize = a + HIFN_SRAM_STEP_SIZE; -+ } -+ -+ return (0); -+} -+ -+/* -+ * XXX For dram boards, one should really try all of the -+ * HIFN_PUCNFG_DSZ_*'s. This just assumes that PUCNFG -+ * is already set up correctly. -+ */ -+static int -+hifn_dramsize(struct hifn_softc *sc) -+{ -+ u_int32_t cnfg; -+ -+ if (sc->sc_flags & HIFN_IS_7956) { -+ /* -+ * 7955/7956 have a fixed internal ram of only 32K. -+ */ -+ sc->sc_ramsize = 32768; -+ } else { -+ cnfg = READ_REG_0(sc, HIFN_0_PUCNFG) & -+ HIFN_PUCNFG_DRAMMASK; -+ sc->sc_ramsize = 1 << ((cnfg >> 13) + 18); -+ } -+ return (0); -+} -+ -+static void -+hifn_alloc_slot(struct hifn_softc *sc, int *cmdp, int *srcp, int *dstp, int *resp) -+{ -+ struct hifn_dma *dma = sc->sc_dma; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ if (dma->cmdi == HIFN_D_CMD_RSIZE) { -+ dma->cmdi = 0; -+ dma->cmdr[HIFN_D_CMD_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ); -+ wmb(); -+ dma->cmdr[HIFN_D_CMD_RSIZE].l |= htole32(HIFN_D_VALID); -+ HIFN_CMDR_SYNC(sc, HIFN_D_CMD_RSIZE, -+ BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); -+ } -+ *cmdp = dma->cmdi++; -+ dma->cmdk = dma->cmdi; -+ -+ if (dma->srci == HIFN_D_SRC_RSIZE) { -+ dma->srci = 0; -+ dma->srcr[HIFN_D_SRC_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ); -+ wmb(); -+ dma->srcr[HIFN_D_SRC_RSIZE].l |= htole32(HIFN_D_VALID); -+ HIFN_SRCR_SYNC(sc, HIFN_D_SRC_RSIZE, -+ BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); -+ } -+ *srcp = dma->srci++; -+ dma->srck = dma->srci; -+ -+ if (dma->dsti == HIFN_D_DST_RSIZE) { -+ dma->dsti = 0; -+ dma->dstr[HIFN_D_DST_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ); -+ wmb(); -+ dma->dstr[HIFN_D_DST_RSIZE].l |= htole32(HIFN_D_VALID); -+ HIFN_DSTR_SYNC(sc, HIFN_D_DST_RSIZE, -+ BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); -+ } -+ *dstp = dma->dsti++; -+ dma->dstk = dma->dsti; -+ -+ if (dma->resi == HIFN_D_RES_RSIZE) { -+ dma->resi = 0; -+ dma->resr[HIFN_D_RES_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ); -+ wmb(); -+ dma->resr[HIFN_D_RES_RSIZE].l |= htole32(HIFN_D_VALID); -+ HIFN_RESR_SYNC(sc, HIFN_D_RES_RSIZE, -+ BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); -+ } -+ *resp = dma->resi++; -+ dma->resk = dma->resi; -+} -+ -+static int -+hifn_writeramaddr(struct hifn_softc *sc, int addr, u_int8_t *data) -+{ -+ struct hifn_dma *dma = sc->sc_dma; -+ hifn_base_command_t wc; -+ const u_int32_t masks = HIFN_D_VALID | HIFN_D_LAST | HIFN_D_MASKDONEIRQ; -+ int r, cmdi, resi, srci, dsti; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ wc.masks = htole16(3 << 13); -+ wc.session_num = htole16(addr >> 14); -+ wc.total_source_count = htole16(8); -+ wc.total_dest_count = htole16(addr & 0x3fff); -+ -+ hifn_alloc_slot(sc, &cmdi, &srci, &dsti, &resi); -+ -+ WRITE_REG_1(sc, HIFN_1_DMA_CSR, -+ HIFN_DMACSR_C_CTRL_ENA | HIFN_DMACSR_S_CTRL_ENA | -+ HIFN_DMACSR_D_CTRL_ENA | HIFN_DMACSR_R_CTRL_ENA); -+ -+ /* build write command */ -+ bzero(dma->command_bufs[cmdi], HIFN_MAX_COMMAND); -+ *(hifn_base_command_t *)dma->command_bufs[cmdi] = wc; -+ bcopy(data, &dma->test_src, sizeof(dma->test_src)); -+ -+ dma->srcr[srci].p = htole32(sc->sc_dma_physaddr -+ + offsetof(struct hifn_dma, test_src)); -+ dma->dstr[dsti].p = htole32(sc->sc_dma_physaddr -+ + offsetof(struct hifn_dma, test_dst)); -+ -+ dma->cmdr[cmdi].l = htole32(16 | masks); -+ dma->srcr[srci].l = htole32(8 | masks); -+ dma->dstr[dsti].l = htole32(4 | masks); -+ dma->resr[resi].l = htole32(4 | masks); -+ -+ for (r = 10000; r >= 0; r--) { -+ DELAY(10); -+ if ((dma->resr[resi].l & htole32(HIFN_D_VALID)) == 0) -+ break; -+ } -+ if (r == 0) { -+ device_printf(sc->sc_dev, "writeramaddr -- " -+ "result[%d](addr %d) still valid\n", resi, addr); -+ r = -1; -+ return (-1); -+ } else -+ r = 0; -+ -+ WRITE_REG_1(sc, HIFN_1_DMA_CSR, -+ HIFN_DMACSR_C_CTRL_DIS | HIFN_DMACSR_S_CTRL_DIS | -+ HIFN_DMACSR_D_CTRL_DIS | HIFN_DMACSR_R_CTRL_DIS); -+ -+ return (r); -+} -+ -+static int -+hifn_readramaddr(struct hifn_softc *sc, int addr, u_int8_t *data) -+{ -+ struct hifn_dma *dma = sc->sc_dma; -+ hifn_base_command_t rc; -+ const u_int32_t masks = HIFN_D_VALID | HIFN_D_LAST | HIFN_D_MASKDONEIRQ; -+ int r, cmdi, srci, dsti, resi; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ rc.masks = htole16(2 << 13); -+ rc.session_num = htole16(addr >> 14); -+ rc.total_source_count = htole16(addr & 0x3fff); -+ rc.total_dest_count = htole16(8); -+ -+ hifn_alloc_slot(sc, &cmdi, &srci, &dsti, &resi); -+ -+ WRITE_REG_1(sc, HIFN_1_DMA_CSR, -+ HIFN_DMACSR_C_CTRL_ENA | HIFN_DMACSR_S_CTRL_ENA | -+ HIFN_DMACSR_D_CTRL_ENA | HIFN_DMACSR_R_CTRL_ENA); -+ -+ bzero(dma->command_bufs[cmdi], HIFN_MAX_COMMAND); -+ *(hifn_base_command_t *)dma->command_bufs[cmdi] = rc; -+ -+ dma->srcr[srci].p = htole32(sc->sc_dma_physaddr + -+ offsetof(struct hifn_dma, test_src)); -+ dma->test_src = 0; -+ dma->dstr[dsti].p = htole32(sc->sc_dma_physaddr + -+ offsetof(struct hifn_dma, test_dst)); -+ dma->test_dst = 0; -+ dma->cmdr[cmdi].l = htole32(8 | masks); -+ dma->srcr[srci].l = htole32(8 | masks); -+ dma->dstr[dsti].l = htole32(8 | masks); -+ dma->resr[resi].l = htole32(HIFN_MAX_RESULT | masks); -+ -+ for (r = 10000; r >= 0; r--) { -+ DELAY(10); -+ if ((dma->resr[resi].l & htole32(HIFN_D_VALID)) == 0) -+ break; -+ } -+ if (r == 0) { -+ device_printf(sc->sc_dev, "readramaddr -- " -+ "result[%d](addr %d) still valid\n", resi, addr); -+ r = -1; -+ } else { -+ r = 0; -+ bcopy(&dma->test_dst, data, sizeof(dma->test_dst)); -+ } -+ -+ WRITE_REG_1(sc, HIFN_1_DMA_CSR, -+ HIFN_DMACSR_C_CTRL_DIS | HIFN_DMACSR_S_CTRL_DIS | -+ HIFN_DMACSR_D_CTRL_DIS | HIFN_DMACSR_R_CTRL_DIS); -+ -+ return (r); -+} -+ -+/* -+ * Initialize the descriptor rings. -+ */ -+static void -+hifn_init_dma(struct hifn_softc *sc) -+{ -+ struct hifn_dma *dma = sc->sc_dma; -+ int i; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ hifn_set_retry(sc); -+ -+ /* initialize static pointer values */ -+ for (i = 0; i < HIFN_D_CMD_RSIZE; i++) -+ dma->cmdr[i].p = htole32(sc->sc_dma_physaddr + -+ offsetof(struct hifn_dma, command_bufs[i][0])); -+ for (i = 0; i < HIFN_D_RES_RSIZE; i++) -+ dma->resr[i].p = htole32(sc->sc_dma_physaddr + -+ offsetof(struct hifn_dma, result_bufs[i][0])); -+ -+ dma->cmdr[HIFN_D_CMD_RSIZE].p = -+ htole32(sc->sc_dma_physaddr + offsetof(struct hifn_dma, cmdr[0])); -+ dma->srcr[HIFN_D_SRC_RSIZE].p = -+ htole32(sc->sc_dma_physaddr + offsetof(struct hifn_dma, srcr[0])); -+ dma->dstr[HIFN_D_DST_RSIZE].p = -+ htole32(sc->sc_dma_physaddr + offsetof(struct hifn_dma, dstr[0])); -+ dma->resr[HIFN_D_RES_RSIZE].p = -+ htole32(sc->sc_dma_physaddr + offsetof(struct hifn_dma, resr[0])); -+ -+ dma->cmdu = dma->srcu = dma->dstu = dma->resu = 0; -+ dma->cmdi = dma->srci = dma->dsti = dma->resi = 0; -+ dma->cmdk = dma->srck = dma->dstk = dma->resk = 0; -+} -+ -+/* -+ * Writes out the raw command buffer space. Returns the -+ * command buffer size. -+ */ -+static u_int -+hifn_write_command(struct hifn_command *cmd, u_int8_t *buf) -+{ -+ struct hifn_softc *sc = NULL; -+ u_int8_t *buf_pos; -+ hifn_base_command_t *base_cmd; -+ hifn_mac_command_t *mac_cmd; -+ hifn_crypt_command_t *cry_cmd; -+ int using_mac, using_crypt, len, ivlen; -+ u_int32_t dlen, slen; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ buf_pos = buf; -+ using_mac = cmd->base_masks & HIFN_BASE_CMD_MAC; -+ using_crypt = cmd->base_masks & HIFN_BASE_CMD_CRYPT; -+ -+ base_cmd = (hifn_base_command_t *)buf_pos; -+ base_cmd->masks = htole16(cmd->base_masks); -+ slen = cmd->src_mapsize; -+ if (cmd->sloplen) -+ dlen = cmd->dst_mapsize - cmd->sloplen + sizeof(u_int32_t); -+ else -+ dlen = cmd->dst_mapsize; -+ base_cmd->total_source_count = htole16(slen & HIFN_BASE_CMD_LENMASK_LO); -+ base_cmd->total_dest_count = htole16(dlen & HIFN_BASE_CMD_LENMASK_LO); -+ dlen >>= 16; -+ slen >>= 16; -+ base_cmd->session_num = htole16( -+ ((slen << HIFN_BASE_CMD_SRCLEN_S) & HIFN_BASE_CMD_SRCLEN_M) | -+ ((dlen << HIFN_BASE_CMD_DSTLEN_S) & HIFN_BASE_CMD_DSTLEN_M)); -+ buf_pos += sizeof(hifn_base_command_t); -+ -+ if (using_mac) { -+ mac_cmd = (hifn_mac_command_t *)buf_pos; -+ dlen = cmd->maccrd->crd_len; -+ mac_cmd->source_count = htole16(dlen & 0xffff); -+ dlen >>= 16; -+ mac_cmd->masks = htole16(cmd->mac_masks | -+ ((dlen << HIFN_MAC_CMD_SRCLEN_S) & HIFN_MAC_CMD_SRCLEN_M)); -+ mac_cmd->header_skip = htole16(cmd->maccrd->crd_skip); -+ mac_cmd->reserved = 0; -+ buf_pos += sizeof(hifn_mac_command_t); -+ } -+ -+ if (using_crypt) { -+ cry_cmd = (hifn_crypt_command_t *)buf_pos; -+ dlen = cmd->enccrd->crd_len; -+ cry_cmd->source_count = htole16(dlen & 0xffff); -+ dlen >>= 16; -+ cry_cmd->masks = htole16(cmd->cry_masks | -+ ((dlen << HIFN_CRYPT_CMD_SRCLEN_S) & HIFN_CRYPT_CMD_SRCLEN_M)); -+ cry_cmd->header_skip = htole16(cmd->enccrd->crd_skip); -+ cry_cmd->reserved = 0; -+ buf_pos += sizeof(hifn_crypt_command_t); -+ } -+ -+ if (using_mac && cmd->mac_masks & HIFN_MAC_CMD_NEW_KEY) { -+ bcopy(cmd->mac, buf_pos, HIFN_MAC_KEY_LENGTH); -+ buf_pos += HIFN_MAC_KEY_LENGTH; -+ } -+ -+ if (using_crypt && cmd->cry_masks & HIFN_CRYPT_CMD_NEW_KEY) { -+ switch (cmd->cry_masks & HIFN_CRYPT_CMD_ALG_MASK) { -+ case HIFN_CRYPT_CMD_ALG_3DES: -+ bcopy(cmd->ck, buf_pos, HIFN_3DES_KEY_LENGTH); -+ buf_pos += HIFN_3DES_KEY_LENGTH; -+ break; -+ case HIFN_CRYPT_CMD_ALG_DES: -+ bcopy(cmd->ck, buf_pos, HIFN_DES_KEY_LENGTH); -+ buf_pos += HIFN_DES_KEY_LENGTH; -+ break; -+ case HIFN_CRYPT_CMD_ALG_RC4: -+ len = 256; -+ do { -+ int clen; -+ -+ clen = MIN(cmd->cklen, len); -+ bcopy(cmd->ck, buf_pos, clen); -+ len -= clen; -+ buf_pos += clen; -+ } while (len > 0); -+ bzero(buf_pos, 4); -+ buf_pos += 4; -+ break; -+ case HIFN_CRYPT_CMD_ALG_AES: -+ /* -+ * AES keys are variable 128, 192 and -+ * 256 bits (16, 24 and 32 bytes). -+ */ -+ bcopy(cmd->ck, buf_pos, cmd->cklen); -+ buf_pos += cmd->cklen; -+ break; -+ } -+ } -+ -+ if (using_crypt && cmd->cry_masks & HIFN_CRYPT_CMD_NEW_IV) { -+ switch (cmd->cry_masks & HIFN_CRYPT_CMD_ALG_MASK) { -+ case HIFN_CRYPT_CMD_ALG_AES: -+ ivlen = HIFN_AES_IV_LENGTH; -+ break; -+ default: -+ ivlen = HIFN_IV_LENGTH; -+ break; -+ } -+ bcopy(cmd->iv, buf_pos, ivlen); -+ buf_pos += ivlen; -+ } -+ -+ if ((cmd->base_masks & (HIFN_BASE_CMD_MAC|HIFN_BASE_CMD_CRYPT)) == 0) { -+ bzero(buf_pos, 8); -+ buf_pos += 8; -+ } -+ -+ return (buf_pos - buf); -+} -+ -+static int -+hifn_dmamap_aligned(struct hifn_operand *op) -+{ -+ struct hifn_softc *sc = NULL; -+ int i; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ for (i = 0; i < op->nsegs; i++) { -+ if (op->segs[i].ds_addr & 3) -+ return (0); -+ if ((i != (op->nsegs - 1)) && (op->segs[i].ds_len & 3)) -+ return (0); -+ } -+ return (1); -+} -+ -+static __inline int -+hifn_dmamap_dstwrap(struct hifn_softc *sc, int idx) -+{ -+ struct hifn_dma *dma = sc->sc_dma; -+ -+ if (++idx == HIFN_D_DST_RSIZE) { -+ dma->dstr[idx].l = htole32(HIFN_D_VALID | HIFN_D_JUMP | -+ HIFN_D_MASKDONEIRQ); -+ HIFN_DSTR_SYNC(sc, idx, -+ BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); -+ idx = 0; -+ } -+ return (idx); -+} -+ -+static int -+hifn_dmamap_load_dst(struct hifn_softc *sc, struct hifn_command *cmd) -+{ -+ struct hifn_dma *dma = sc->sc_dma; -+ struct hifn_operand *dst = &cmd->dst; -+ u_int32_t p, l; -+ int idx, used = 0, i; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ idx = dma->dsti; -+ for (i = 0; i < dst->nsegs - 1; i++) { -+ dma->dstr[idx].p = htole32(dst->segs[i].ds_addr); -+ dma->dstr[idx].l = htole32(HIFN_D_MASKDONEIRQ | dst->segs[i].ds_len); -+ wmb(); -+ dma->dstr[idx].l |= htole32(HIFN_D_VALID); -+ HIFN_DSTR_SYNC(sc, idx, -+ BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); -+ used++; -+ -+ idx = hifn_dmamap_dstwrap(sc, idx); -+ } -+ -+ if (cmd->sloplen == 0) { -+ p = dst->segs[i].ds_addr; -+ l = HIFN_D_MASKDONEIRQ | HIFN_D_LAST | -+ dst->segs[i].ds_len; -+ } else { -+ p = sc->sc_dma_physaddr + -+ offsetof(struct hifn_dma, slop[cmd->slopidx]); -+ l = HIFN_D_MASKDONEIRQ | HIFN_D_LAST | -+ sizeof(u_int32_t); -+ -+ if ((dst->segs[i].ds_len - cmd->sloplen) != 0) { -+ dma->dstr[idx].p = htole32(dst->segs[i].ds_addr); -+ dma->dstr[idx].l = htole32(HIFN_D_MASKDONEIRQ | -+ (dst->segs[i].ds_len - cmd->sloplen)); -+ wmb(); -+ dma->dstr[idx].l |= htole32(HIFN_D_VALID); -+ HIFN_DSTR_SYNC(sc, idx, -+ BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); -+ used++; -+ -+ idx = hifn_dmamap_dstwrap(sc, idx); -+ } -+ } -+ dma->dstr[idx].p = htole32(p); -+ dma->dstr[idx].l = htole32(l); -+ wmb(); -+ dma->dstr[idx].l |= htole32(HIFN_D_VALID); -+ HIFN_DSTR_SYNC(sc, idx, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); -+ used++; -+ -+ idx = hifn_dmamap_dstwrap(sc, idx); -+ -+ dma->dsti = idx; -+ dma->dstu += used; -+ return (idx); -+} -+ -+static __inline int -+hifn_dmamap_srcwrap(struct hifn_softc *sc, int idx) -+{ -+ struct hifn_dma *dma = sc->sc_dma; -+ -+ if (++idx == HIFN_D_SRC_RSIZE) { -+ dma->srcr[idx].l = htole32(HIFN_D_VALID | -+ HIFN_D_JUMP | HIFN_D_MASKDONEIRQ); -+ HIFN_SRCR_SYNC(sc, HIFN_D_SRC_RSIZE, -+ BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); -+ idx = 0; -+ } -+ return (idx); -+} -+ -+static int -+hifn_dmamap_load_src(struct hifn_softc *sc, struct hifn_command *cmd) -+{ -+ struct hifn_dma *dma = sc->sc_dma; -+ struct hifn_operand *src = &cmd->src; -+ int idx, i; -+ u_int32_t last = 0; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ idx = dma->srci; -+ for (i = 0; i < src->nsegs; i++) { -+ if (i == src->nsegs - 1) -+ last = HIFN_D_LAST; -+ -+ dma->srcr[idx].p = htole32(src->segs[i].ds_addr); -+ dma->srcr[idx].l = htole32(src->segs[i].ds_len | -+ HIFN_D_MASKDONEIRQ | last); -+ wmb(); -+ dma->srcr[idx].l |= htole32(HIFN_D_VALID); -+ HIFN_SRCR_SYNC(sc, idx, -+ BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); -+ -+ idx = hifn_dmamap_srcwrap(sc, idx); -+ } -+ dma->srci = idx; -+ dma->srcu += src->nsegs; -+ return (idx); -+} -+ -+ -+static int -+hifn_crypto( -+ struct hifn_softc *sc, -+ struct hifn_command *cmd, -+ struct cryptop *crp, -+ int hint) -+{ -+ struct hifn_dma *dma = sc->sc_dma; -+ u_int32_t cmdlen, csr; -+ int cmdi, resi, err = 0; -+ unsigned long l_flags; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ /* -+ * need 1 cmd, and 1 res -+ * -+ * NB: check this first since it's easy. -+ */ -+ HIFN_LOCK(sc); -+ if ((dma->cmdu + 1) > HIFN_D_CMD_RSIZE || -+ (dma->resu + 1) > HIFN_D_RES_RSIZE) { -+#ifdef HIFN_DEBUG -+ if (hifn_debug) { -+ device_printf(sc->sc_dev, -+ "cmd/result exhaustion, cmdu %u resu %u\n", -+ dma->cmdu, dma->resu); -+ } -+#endif -+ hifnstats.hst_nomem_cr++; -+ sc->sc_needwakeup |= CRYPTO_SYMQ; -+ HIFN_UNLOCK(sc); -+ return (ERESTART); -+ } -+ -+ if (crp->crp_flags & CRYPTO_F_SKBUF) { -+ if (pci_map_skb(sc, &cmd->src, cmd->src_skb)) { -+ hifnstats.hst_nomem_load++; -+ err = ENOMEM; -+ goto err_srcmap1; -+ } -+ } else if (crp->crp_flags & CRYPTO_F_IOV) { -+ if (pci_map_uio(sc, &cmd->src, cmd->src_io)) { -+ hifnstats.hst_nomem_load++; -+ err = ENOMEM; -+ goto err_srcmap1; -+ } -+ } else { -+ if (pci_map_buf(sc, &cmd->src, cmd->src_buf, crp->crp_ilen)) { -+ hifnstats.hst_nomem_load++; -+ err = ENOMEM; -+ goto err_srcmap1; -+ } -+ } -+ -+ if (hifn_dmamap_aligned(&cmd->src)) { -+ cmd->sloplen = cmd->src_mapsize & 3; -+ cmd->dst = cmd->src; -+ } else { -+ if (crp->crp_flags & CRYPTO_F_IOV) { -+ DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); -+ err = EINVAL; -+ goto err_srcmap; -+ } else if (crp->crp_flags & CRYPTO_F_SKBUF) { -+#ifdef NOTYET -+ int totlen, len; -+ struct mbuf *m, *m0, *mlast; -+ -+ KASSERT(cmd->dst_m == cmd->src_m, -+ ("hifn_crypto: dst_m initialized improperly")); -+ hifnstats.hst_unaligned++; -+ /* -+ * Source is not aligned on a longword boundary. -+ * Copy the data to insure alignment. If we fail -+ * to allocate mbufs or clusters while doing this -+ * we return ERESTART so the operation is requeued -+ * at the crypto later, but only if there are -+ * ops already posted to the hardware; otherwise we -+ * have no guarantee that we'll be re-entered. -+ */ -+ totlen = cmd->src_mapsize; -+ if (cmd->src_m->m_flags & M_PKTHDR) { -+ len = MHLEN; -+ MGETHDR(m0, M_DONTWAIT, MT_DATA); -+ if (m0 && !m_dup_pkthdr(m0, cmd->src_m, M_DONTWAIT)) { -+ m_free(m0); -+ m0 = NULL; -+ } -+ } else { -+ len = MLEN; -+ MGET(m0, M_DONTWAIT, MT_DATA); -+ } -+ if (m0 == NULL) { -+ hifnstats.hst_nomem_mbuf++; -+ err = dma->cmdu ? ERESTART : ENOMEM; -+ goto err_srcmap; -+ } -+ if (totlen >= MINCLSIZE) { -+ MCLGET(m0, M_DONTWAIT); -+ if ((m0->m_flags & M_EXT) == 0) { -+ hifnstats.hst_nomem_mcl++; -+ err = dma->cmdu ? ERESTART : ENOMEM; -+ m_freem(m0); -+ goto err_srcmap; -+ } -+ len = MCLBYTES; -+ } -+ totlen -= len; -+ m0->m_pkthdr.len = m0->m_len = len; -+ mlast = m0; -+ -+ while (totlen > 0) { -+ MGET(m, M_DONTWAIT, MT_DATA); -+ if (m == NULL) { -+ hifnstats.hst_nomem_mbuf++; -+ err = dma->cmdu ? ERESTART : ENOMEM; -+ m_freem(m0); -+ goto err_srcmap; -+ } -+ len = MLEN; -+ if (totlen >= MINCLSIZE) { -+ MCLGET(m, M_DONTWAIT); -+ if ((m->m_flags & M_EXT) == 0) { -+ hifnstats.hst_nomem_mcl++; -+ err = dma->cmdu ? ERESTART : ENOMEM; -+ mlast->m_next = m; -+ m_freem(m0); -+ goto err_srcmap; -+ } -+ len = MCLBYTES; -+ } -+ -+ m->m_len = len; -+ m0->m_pkthdr.len += len; -+ totlen -= len; -+ -+ mlast->m_next = m; -+ mlast = m; -+ } -+ cmd->dst_m = m0; -+#else -+ device_printf(sc->sc_dev, -+ "%s,%d: CRYPTO_F_SKBUF unaligned not implemented\n", -+ __FILE__, __LINE__); -+ err = EINVAL; -+ goto err_srcmap; -+#endif -+ } else { -+ device_printf(sc->sc_dev, -+ "%s,%d: unaligned contig buffers not implemented\n", -+ __FILE__, __LINE__); -+ err = EINVAL; -+ goto err_srcmap; -+ } -+ } -+ -+ if (cmd->dst_map == NULL) { -+ if (crp->crp_flags & CRYPTO_F_SKBUF) { -+ if (pci_map_skb(sc, &cmd->dst, cmd->dst_skb)) { -+ hifnstats.hst_nomem_map++; -+ err = ENOMEM; -+ goto err_dstmap1; -+ } -+ } else if (crp->crp_flags & CRYPTO_F_IOV) { -+ if (pci_map_uio(sc, &cmd->dst, cmd->dst_io)) { -+ hifnstats.hst_nomem_load++; -+ err = ENOMEM; -+ goto err_dstmap1; -+ } -+ } else { -+ if (pci_map_buf(sc, &cmd->dst, cmd->dst_buf, crp->crp_ilen)) { -+ hifnstats.hst_nomem_load++; -+ err = ENOMEM; -+ goto err_dstmap1; -+ } -+ } -+ } -+ -+#ifdef HIFN_DEBUG -+ if (hifn_debug) { -+ device_printf(sc->sc_dev, -+ "Entering cmd: stat %8x ien %8x u %d/%d/%d/%d n %d/%d\n", -+ READ_REG_1(sc, HIFN_1_DMA_CSR), -+ READ_REG_1(sc, HIFN_1_DMA_IER), -+ dma->cmdu, dma->srcu, dma->dstu, dma->resu, -+ cmd->src_nsegs, cmd->dst_nsegs); -+ } -+#endif -+ -+#if 0 -+ if (cmd->src_map == cmd->dst_map) { -+ bus_dmamap_sync(sc->sc_dmat, cmd->src_map, -+ BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD); -+ } else { -+ bus_dmamap_sync(sc->sc_dmat, cmd->src_map, -+ BUS_DMASYNC_PREWRITE); -+ bus_dmamap_sync(sc->sc_dmat, cmd->dst_map, -+ BUS_DMASYNC_PREREAD); -+ } -+#endif -+ -+ /* -+ * need N src, and N dst -+ */ -+ if ((dma->srcu + cmd->src_nsegs) > HIFN_D_SRC_RSIZE || -+ (dma->dstu + cmd->dst_nsegs + 1) > HIFN_D_DST_RSIZE) { -+#ifdef HIFN_DEBUG -+ if (hifn_debug) { -+ device_printf(sc->sc_dev, -+ "src/dst exhaustion, srcu %u+%u dstu %u+%u\n", -+ dma->srcu, cmd->src_nsegs, -+ dma->dstu, cmd->dst_nsegs); -+ } -+#endif -+ hifnstats.hst_nomem_sd++; -+ err = ERESTART; -+ goto err_dstmap; -+ } -+ -+ if (dma->cmdi == HIFN_D_CMD_RSIZE) { -+ dma->cmdi = 0; -+ dma->cmdr[HIFN_D_CMD_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ); -+ wmb(); -+ dma->cmdr[HIFN_D_CMD_RSIZE].l |= htole32(HIFN_D_VALID); -+ HIFN_CMDR_SYNC(sc, HIFN_D_CMD_RSIZE, -+ BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); -+ } -+ cmdi = dma->cmdi++; -+ cmdlen = hifn_write_command(cmd, dma->command_bufs[cmdi]); -+ HIFN_CMD_SYNC(sc, cmdi, BUS_DMASYNC_PREWRITE); -+ -+ /* .p for command/result already set */ -+ dma->cmdr[cmdi].l = htole32(cmdlen | HIFN_D_LAST | -+ HIFN_D_MASKDONEIRQ); -+ wmb(); -+ dma->cmdr[cmdi].l |= htole32(HIFN_D_VALID); -+ HIFN_CMDR_SYNC(sc, cmdi, -+ BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); -+ dma->cmdu++; -+ -+ /* -+ * We don't worry about missing an interrupt (which a "command wait" -+ * interrupt salvages us from), unless there is more than one command -+ * in the queue. -+ */ -+ if (dma->cmdu > 1) { -+ sc->sc_dmaier |= HIFN_DMAIER_C_WAIT; -+ WRITE_REG_1(sc, HIFN_1_DMA_IER, sc->sc_dmaier); -+ } -+ -+ hifnstats.hst_ipackets++; -+ hifnstats.hst_ibytes += cmd->src_mapsize; -+ -+ hifn_dmamap_load_src(sc, cmd); -+ -+ /* -+ * Unlike other descriptors, we don't mask done interrupt from -+ * result descriptor. -+ */ -+#ifdef HIFN_DEBUG -+ if (hifn_debug) -+ device_printf(sc->sc_dev, "load res\n"); -+#endif -+ if (dma->resi == HIFN_D_RES_RSIZE) { -+ dma->resi = 0; -+ dma->resr[HIFN_D_RES_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ); -+ wmb(); -+ dma->resr[HIFN_D_RES_RSIZE].l |= htole32(HIFN_D_VALID); -+ HIFN_RESR_SYNC(sc, HIFN_D_RES_RSIZE, -+ BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); -+ } -+ resi = dma->resi++; -+ KASSERT(dma->hifn_commands[resi] == NULL, -+ ("hifn_crypto: command slot %u busy", resi)); -+ dma->hifn_commands[resi] = cmd; -+ HIFN_RES_SYNC(sc, resi, BUS_DMASYNC_PREREAD); -+ if ((hint & CRYPTO_HINT_MORE) && sc->sc_curbatch < hifn_maxbatch) { -+ dma->resr[resi].l = htole32(HIFN_MAX_RESULT | -+ HIFN_D_LAST | HIFN_D_MASKDONEIRQ); -+ wmb(); -+ dma->resr[resi].l |= htole32(HIFN_D_VALID); -+ sc->sc_curbatch++; -+ if (sc->sc_curbatch > hifnstats.hst_maxbatch) -+ hifnstats.hst_maxbatch = sc->sc_curbatch; -+ hifnstats.hst_totbatch++; -+ } else { -+ dma->resr[resi].l = htole32(HIFN_MAX_RESULT | HIFN_D_LAST); -+ wmb(); -+ dma->resr[resi].l |= htole32(HIFN_D_VALID); -+ sc->sc_curbatch = 0; -+ } -+ HIFN_RESR_SYNC(sc, resi, -+ BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); -+ dma->resu++; -+ -+ if (cmd->sloplen) -+ cmd->slopidx = resi; -+ -+ hifn_dmamap_load_dst(sc, cmd); -+ -+ csr = 0; -+ if (sc->sc_c_busy == 0) { -+ csr |= HIFN_DMACSR_C_CTRL_ENA; -+ sc->sc_c_busy = 1; -+ } -+ if (sc->sc_s_busy == 0) { -+ csr |= HIFN_DMACSR_S_CTRL_ENA; -+ sc->sc_s_busy = 1; -+ } -+ if (sc->sc_r_busy == 0) { -+ csr |= HIFN_DMACSR_R_CTRL_ENA; -+ sc->sc_r_busy = 1; -+ } -+ if (sc->sc_d_busy == 0) { -+ csr |= HIFN_DMACSR_D_CTRL_ENA; -+ sc->sc_d_busy = 1; -+ } -+ if (csr) -+ WRITE_REG_1(sc, HIFN_1_DMA_CSR, csr); -+ -+#ifdef HIFN_DEBUG -+ if (hifn_debug) { -+ device_printf(sc->sc_dev, "command: stat %8x ier %8x\n", -+ READ_REG_1(sc, HIFN_1_DMA_CSR), -+ READ_REG_1(sc, HIFN_1_DMA_IER)); -+ } -+#endif -+ -+ sc->sc_active = 5; -+ HIFN_UNLOCK(sc); -+ KASSERT(err == 0, ("hifn_crypto: success with error %u", err)); -+ return (err); /* success */ -+ -+err_dstmap: -+ if (cmd->src_map != cmd->dst_map) -+ pci_unmap_buf(sc, &cmd->dst); -+err_dstmap1: -+err_srcmap: -+ if (crp->crp_flags & CRYPTO_F_SKBUF) { -+ if (cmd->src_skb != cmd->dst_skb) -+#ifdef NOTYET -+ m_freem(cmd->dst_m); -+#else -+ device_printf(sc->sc_dev, -+ "%s,%d: CRYPTO_F_SKBUF src != dst not implemented\n", -+ __FILE__, __LINE__); -+#endif -+ } -+ pci_unmap_buf(sc, &cmd->src); -+err_srcmap1: -+ HIFN_UNLOCK(sc); -+ return (err); -+} -+ -+static void -+hifn_tick(unsigned long arg) -+{ -+ struct hifn_softc *sc; -+ unsigned long l_flags; -+ -+ if (arg >= HIFN_MAX_CHIPS) -+ return; -+ sc = hifn_chip_idx[arg]; -+ if (!sc) -+ return; -+ -+ HIFN_LOCK(sc); -+ if (sc->sc_active == 0) { -+ struct hifn_dma *dma = sc->sc_dma; -+ u_int32_t r = 0; -+ -+ if (dma->cmdu == 0 && sc->sc_c_busy) { -+ sc->sc_c_busy = 0; -+ r |= HIFN_DMACSR_C_CTRL_DIS; -+ } -+ if (dma->srcu == 0 && sc->sc_s_busy) { -+ sc->sc_s_busy = 0; -+ r |= HIFN_DMACSR_S_CTRL_DIS; -+ } -+ if (dma->dstu == 0 && sc->sc_d_busy) { -+ sc->sc_d_busy = 0; -+ r |= HIFN_DMACSR_D_CTRL_DIS; -+ } -+ if (dma->resu == 0 && sc->sc_r_busy) { -+ sc->sc_r_busy = 0; -+ r |= HIFN_DMACSR_R_CTRL_DIS; -+ } -+ if (r) -+ WRITE_REG_1(sc, HIFN_1_DMA_CSR, r); -+ } else -+ sc->sc_active--; -+ HIFN_UNLOCK(sc); -+ mod_timer(&sc->sc_tickto, jiffies + HZ); -+} -+ -+static irqreturn_t -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) -+hifn_intr(int irq, void *arg) -+#else -+hifn_intr(int irq, void *arg, struct pt_regs *regs) -+#endif -+{ -+ struct hifn_softc *sc = arg; -+ struct hifn_dma *dma; -+ u_int32_t dmacsr, restart; -+ int i, u; -+ unsigned long l_flags; -+ -+ dmacsr = READ_REG_1(sc, HIFN_1_DMA_CSR); -+ -+ /* Nothing in the DMA unit interrupted */ -+ if ((dmacsr & sc->sc_dmaier) == 0) -+ return IRQ_NONE; -+ -+ HIFN_LOCK(sc); -+ -+ dma = sc->sc_dma; -+ -+#ifdef HIFN_DEBUG -+ if (hifn_debug) { -+ device_printf(sc->sc_dev, -+ "irq: stat %08x ien %08x damier %08x i %d/%d/%d/%d k %d/%d/%d/%d u %d/%d/%d/%d\n", -+ dmacsr, READ_REG_1(sc, HIFN_1_DMA_IER), sc->sc_dmaier, -+ dma->cmdi, dma->srci, dma->dsti, dma->resi, -+ dma->cmdk, dma->srck, dma->dstk, dma->resk, -+ dma->cmdu, dma->srcu, dma->dstu, dma->resu); -+ } -+#endif -+ -+ WRITE_REG_1(sc, HIFN_1_DMA_CSR, dmacsr & sc->sc_dmaier); -+ -+ if ((sc->sc_flags & HIFN_HAS_PUBLIC) && -+ (dmacsr & HIFN_DMACSR_PUBDONE)) -+ WRITE_REG_1(sc, HIFN_1_PUB_STATUS, -+ READ_REG_1(sc, HIFN_1_PUB_STATUS) | HIFN_PUBSTS_DONE); -+ -+ restart = dmacsr & (HIFN_DMACSR_D_OVER | HIFN_DMACSR_R_OVER); -+ if (restart) -+ device_printf(sc->sc_dev, "overrun %x\n", dmacsr); -+ -+ if (sc->sc_flags & HIFN_IS_7811) { -+ if (dmacsr & HIFN_DMACSR_ILLR) -+ device_printf(sc->sc_dev, "illegal read\n"); -+ if (dmacsr & HIFN_DMACSR_ILLW) -+ device_printf(sc->sc_dev, "illegal write\n"); -+ } -+ -+ restart = dmacsr & (HIFN_DMACSR_C_ABORT | HIFN_DMACSR_S_ABORT | -+ HIFN_DMACSR_D_ABORT | HIFN_DMACSR_R_ABORT); -+ if (restart) { -+ device_printf(sc->sc_dev, "abort, resetting.\n"); -+ hifnstats.hst_abort++; -+ hifn_abort(sc); -+ HIFN_UNLOCK(sc); -+ return IRQ_HANDLED; -+ } -+ -+ if ((dmacsr & HIFN_DMACSR_C_WAIT) && (dma->cmdu == 0)) { -+ /* -+ * If no slots to process and we receive a "waiting on -+ * command" interrupt, we disable the "waiting on command" -+ * (by clearing it). -+ */ -+ sc->sc_dmaier &= ~HIFN_DMAIER_C_WAIT; -+ WRITE_REG_1(sc, HIFN_1_DMA_IER, sc->sc_dmaier); -+ } -+ -+ /* clear the rings */ -+ i = dma->resk; u = dma->resu; -+ while (u != 0) { -+ HIFN_RESR_SYNC(sc, i, -+ BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); -+ if (dma->resr[i].l & htole32(HIFN_D_VALID)) { -+ HIFN_RESR_SYNC(sc, i, -+ BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); -+ break; -+ } -+ -+ if (i != HIFN_D_RES_RSIZE) { -+ struct hifn_command *cmd; -+ u_int8_t *macbuf = NULL; -+ -+ HIFN_RES_SYNC(sc, i, BUS_DMASYNC_POSTREAD); -+ cmd = dma->hifn_commands[i]; -+ KASSERT(cmd != NULL, -+ ("hifn_intr: null command slot %u", i)); -+ dma->hifn_commands[i] = NULL; -+ -+ if (cmd->base_masks & HIFN_BASE_CMD_MAC) { -+ macbuf = dma->result_bufs[i]; -+ macbuf += 12; -+ } -+ -+ hifn_callback(sc, cmd, macbuf); -+ hifnstats.hst_opackets++; -+ u--; -+ } -+ -+ if (++i == (HIFN_D_RES_RSIZE + 1)) -+ i = 0; -+ } -+ dma->resk = i; dma->resu = u; -+ -+ i = dma->srck; u = dma->srcu; -+ while (u != 0) { -+ if (i == HIFN_D_SRC_RSIZE) -+ i = 0; -+ HIFN_SRCR_SYNC(sc, i, -+ BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); -+ if (dma->srcr[i].l & htole32(HIFN_D_VALID)) { -+ HIFN_SRCR_SYNC(sc, i, -+ BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); -+ break; -+ } -+ i++, u--; -+ } -+ dma->srck = i; dma->srcu = u; -+ -+ i = dma->cmdk; u = dma->cmdu; -+ while (u != 0) { -+ HIFN_CMDR_SYNC(sc, i, -+ BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); -+ if (dma->cmdr[i].l & htole32(HIFN_D_VALID)) { -+ HIFN_CMDR_SYNC(sc, i, -+ BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); -+ break; -+ } -+ if (i != HIFN_D_CMD_RSIZE) { -+ u--; -+ HIFN_CMD_SYNC(sc, i, BUS_DMASYNC_POSTWRITE); -+ } -+ if (++i == (HIFN_D_CMD_RSIZE + 1)) -+ i = 0; -+ } -+ dma->cmdk = i; dma->cmdu = u; -+ -+ HIFN_UNLOCK(sc); -+ -+ if (sc->sc_needwakeup) { /* XXX check high watermark */ -+ int wakeup = sc->sc_needwakeup & (CRYPTO_SYMQ|CRYPTO_ASYMQ); -+#ifdef HIFN_DEBUG -+ if (hifn_debug) -+ device_printf(sc->sc_dev, -+ "wakeup crypto (%x) u %d/%d/%d/%d\n", -+ sc->sc_needwakeup, -+ dma->cmdu, dma->srcu, dma->dstu, dma->resu); -+#endif -+ sc->sc_needwakeup &= ~wakeup; -+ crypto_unblock(sc->sc_cid, wakeup); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+/* -+ * Allocate a new 'session' and return an encoded session id. 'sidp' -+ * contains our registration id, and should contain an encoded session -+ * id on successful allocation. -+ */ -+static int -+hifn_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri) -+{ -+ struct hifn_softc *sc = device_get_softc(dev); -+ struct cryptoini *c; -+ int mac = 0, cry = 0, sesn; -+ struct hifn_session *ses = NULL; -+ unsigned long l_flags; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ KASSERT(sc != NULL, ("hifn_newsession: null softc")); -+ if (sidp == NULL || cri == NULL || sc == NULL) { -+ DPRINTF("%s,%d: %s - EINVAL\n", __FILE__, __LINE__, __FUNCTION__); -+ return (EINVAL); -+ } -+ -+ HIFN_LOCK(sc); -+ if (sc->sc_sessions == NULL) { -+ ses = sc->sc_sessions = (struct hifn_session *)kmalloc(sizeof(*ses), -+ SLAB_ATOMIC); -+ if (ses == NULL) { -+ HIFN_UNLOCK(sc); -+ return (ENOMEM); -+ } -+ sesn = 0; -+ sc->sc_nsessions = 1; -+ } else { -+ for (sesn = 0; sesn < sc->sc_nsessions; sesn++) { -+ if (!sc->sc_sessions[sesn].hs_used) { -+ ses = &sc->sc_sessions[sesn]; -+ break; -+ } -+ } -+ -+ if (ses == NULL) { -+ sesn = sc->sc_nsessions; -+ ses = (struct hifn_session *)kmalloc((sesn + 1) * sizeof(*ses), -+ SLAB_ATOMIC); -+ if (ses == NULL) { -+ HIFN_UNLOCK(sc); -+ return (ENOMEM); -+ } -+ bcopy(sc->sc_sessions, ses, sesn * sizeof(*ses)); -+ bzero(sc->sc_sessions, sesn * sizeof(*ses)); -+ kfree(sc->sc_sessions); -+ sc->sc_sessions = ses; -+ ses = &sc->sc_sessions[sesn]; -+ sc->sc_nsessions++; -+ } -+ } -+ HIFN_UNLOCK(sc); -+ -+ bzero(ses, sizeof(*ses)); -+ ses->hs_used = 1; -+ -+ for (c = cri; c != NULL; c = c->cri_next) { -+ switch (c->cri_alg) { -+ case CRYPTO_MD5: -+ case CRYPTO_SHA1: -+ case CRYPTO_MD5_HMAC: -+ case CRYPTO_SHA1_HMAC: -+ if (mac) { -+ DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); -+ return (EINVAL); -+ } -+ mac = 1; -+ ses->hs_mlen = c->cri_mlen; -+ if (ses->hs_mlen == 0) { -+ switch (c->cri_alg) { -+ case CRYPTO_MD5: -+ case CRYPTO_MD5_HMAC: -+ ses->hs_mlen = 16; -+ break; -+ case CRYPTO_SHA1: -+ case CRYPTO_SHA1_HMAC: -+ ses->hs_mlen = 20; -+ break; -+ } -+ } -+ break; -+ case CRYPTO_DES_CBC: -+ case CRYPTO_3DES_CBC: -+ case CRYPTO_AES_CBC: -+ /* XXX this may read fewer, does it matter? */ -+ read_random(ses->hs_iv, -+ c->cri_alg == CRYPTO_AES_CBC ? -+ HIFN_AES_IV_LENGTH : HIFN_IV_LENGTH); -+ /*FALLTHROUGH*/ -+ case CRYPTO_ARC4: -+ if (cry) { -+ DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); -+ return (EINVAL); -+ } -+ cry = 1; -+ break; -+ default: -+ DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); -+ return (EINVAL); -+ } -+ } -+ if (mac == 0 && cry == 0) { -+ DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); -+ return (EINVAL); -+ } -+ -+ *sidp = HIFN_SID(device_get_unit(sc->sc_dev), sesn); -+ -+ return (0); -+} -+ -+/* -+ * Deallocate a session. -+ * XXX this routine should run a zero'd mac/encrypt key into context ram. -+ * XXX to blow away any keys already stored there. -+ */ -+static int -+hifn_freesession(device_t dev, u_int64_t tid) -+{ -+ struct hifn_softc *sc = device_get_softc(dev); -+ int session, error; -+ u_int32_t sid = CRYPTO_SESID2LID(tid); -+ unsigned long l_flags; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ KASSERT(sc != NULL, ("hifn_freesession: null softc")); -+ if (sc == NULL) { -+ DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); -+ return (EINVAL); -+ } -+ -+ HIFN_LOCK(sc); -+ session = HIFN_SESSION(sid); -+ if (session < sc->sc_nsessions) { -+ bzero(&sc->sc_sessions[session], sizeof(struct hifn_session)); -+ error = 0; -+ } else { -+ DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); -+ error = EINVAL; -+ } -+ HIFN_UNLOCK(sc); -+ -+ return (error); -+} -+ -+static int -+hifn_process(device_t dev, struct cryptop *crp, int hint) -+{ -+ struct hifn_softc *sc = device_get_softc(dev); -+ struct hifn_command *cmd = NULL; -+ int session, err, ivlen; -+ struct cryptodesc *crd1, *crd2, *maccrd, *enccrd; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ if (crp == NULL || crp->crp_callback == NULL) { -+ hifnstats.hst_invalid++; -+ DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); -+ return (EINVAL); -+ } -+ session = HIFN_SESSION(crp->crp_sid); -+ -+ if (sc == NULL || session >= sc->sc_nsessions) { -+ DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); -+ err = EINVAL; -+ goto errout; -+ } -+ -+ cmd = kmalloc(sizeof(struct hifn_command), SLAB_ATOMIC); -+ if (cmd == NULL) { -+ hifnstats.hst_nomem++; -+ err = ENOMEM; -+ goto errout; -+ } -+ memset(cmd, 0, sizeof(*cmd)); -+ -+ if (crp->crp_flags & CRYPTO_F_SKBUF) { -+ cmd->src_skb = (struct sk_buff *)crp->crp_buf; -+ cmd->dst_skb = (struct sk_buff *)crp->crp_buf; -+ } else if (crp->crp_flags & CRYPTO_F_IOV) { -+ cmd->src_io = (struct uio *)crp->crp_buf; -+ cmd->dst_io = (struct uio *)crp->crp_buf; -+ } else { -+ cmd->src_buf = crp->crp_buf; -+ cmd->dst_buf = crp->crp_buf; -+ } -+ -+ crd1 = crp->crp_desc; -+ if (crd1 == NULL) { -+ DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); -+ err = EINVAL; -+ goto errout; -+ } -+ crd2 = crd1->crd_next; -+ -+ if (crd2 == NULL) { -+ if (crd1->crd_alg == CRYPTO_MD5_HMAC || -+ crd1->crd_alg == CRYPTO_SHA1_HMAC || -+ crd1->crd_alg == CRYPTO_SHA1 || -+ crd1->crd_alg == CRYPTO_MD5) { -+ maccrd = crd1; -+ enccrd = NULL; -+ } else if (crd1->crd_alg == CRYPTO_DES_CBC || -+ crd1->crd_alg == CRYPTO_3DES_CBC || -+ crd1->crd_alg == CRYPTO_AES_CBC || -+ crd1->crd_alg == CRYPTO_ARC4) { -+ if ((crd1->crd_flags & CRD_F_ENCRYPT) == 0) -+ cmd->base_masks |= HIFN_BASE_CMD_DECODE; -+ maccrd = NULL; -+ enccrd = crd1; -+ } else { -+ DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); -+ err = EINVAL; -+ goto errout; -+ } -+ } else { -+ if ((crd1->crd_alg == CRYPTO_MD5_HMAC || -+ crd1->crd_alg == CRYPTO_SHA1_HMAC || -+ crd1->crd_alg == CRYPTO_MD5 || -+ crd1->crd_alg == CRYPTO_SHA1) && -+ (crd2->crd_alg == CRYPTO_DES_CBC || -+ crd2->crd_alg == CRYPTO_3DES_CBC || -+ crd2->crd_alg == CRYPTO_AES_CBC || -+ crd2->crd_alg == CRYPTO_ARC4) && -+ ((crd2->crd_flags & CRD_F_ENCRYPT) == 0)) { -+ cmd->base_masks = HIFN_BASE_CMD_DECODE; -+ maccrd = crd1; -+ enccrd = crd2; -+ } else if ((crd1->crd_alg == CRYPTO_DES_CBC || -+ crd1->crd_alg == CRYPTO_ARC4 || -+ crd1->crd_alg == CRYPTO_3DES_CBC || -+ crd1->crd_alg == CRYPTO_AES_CBC) && -+ (crd2->crd_alg == CRYPTO_MD5_HMAC || -+ crd2->crd_alg == CRYPTO_SHA1_HMAC || -+ crd2->crd_alg == CRYPTO_MD5 || -+ crd2->crd_alg == CRYPTO_SHA1) && -+ (crd1->crd_flags & CRD_F_ENCRYPT)) { -+ enccrd = crd1; -+ maccrd = crd2; -+ } else { -+ /* -+ * We cannot order the 7751 as requested -+ */ -+ DPRINTF("%s,%d: %s %d,%d,%d - EINVAL\n",__FILE__,__LINE__,__FUNCTION__, crd1->crd_alg, crd2->crd_alg, crd1->crd_flags & CRD_F_ENCRYPT); -+ err = EINVAL; -+ goto errout; -+ } -+ } -+ -+ if (enccrd) { -+ cmd->enccrd = enccrd; -+ cmd->base_masks |= HIFN_BASE_CMD_CRYPT; -+ switch (enccrd->crd_alg) { -+ case CRYPTO_ARC4: -+ cmd->cry_masks |= HIFN_CRYPT_CMD_ALG_RC4; -+ break; -+ case CRYPTO_DES_CBC: -+ cmd->cry_masks |= HIFN_CRYPT_CMD_ALG_DES | -+ HIFN_CRYPT_CMD_MODE_CBC | -+ HIFN_CRYPT_CMD_NEW_IV; -+ break; -+ case CRYPTO_3DES_CBC: -+ cmd->cry_masks |= HIFN_CRYPT_CMD_ALG_3DES | -+ HIFN_CRYPT_CMD_MODE_CBC | -+ HIFN_CRYPT_CMD_NEW_IV; -+ break; -+ case CRYPTO_AES_CBC: -+ cmd->cry_masks |= HIFN_CRYPT_CMD_ALG_AES | -+ HIFN_CRYPT_CMD_MODE_CBC | -+ HIFN_CRYPT_CMD_NEW_IV; -+ break; -+ default: -+ DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); -+ err = EINVAL; -+ goto errout; -+ } -+ if (enccrd->crd_alg != CRYPTO_ARC4) { -+ ivlen = ((enccrd->crd_alg == CRYPTO_AES_CBC) ? -+ HIFN_AES_IV_LENGTH : HIFN_IV_LENGTH); -+ if (enccrd->crd_flags & CRD_F_ENCRYPT) { -+ if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) -+ bcopy(enccrd->crd_iv, cmd->iv, ivlen); -+ else -+ bcopy(sc->sc_sessions[session].hs_iv, -+ cmd->iv, ivlen); -+ -+ if ((enccrd->crd_flags & CRD_F_IV_PRESENT) -+ == 0) { -+ crypto_copyback(crp->crp_flags, -+ crp->crp_buf, enccrd->crd_inject, -+ ivlen, cmd->iv); -+ } -+ } else { -+ if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) -+ bcopy(enccrd->crd_iv, cmd->iv, ivlen); -+ else { -+ crypto_copydata(crp->crp_flags, -+ crp->crp_buf, enccrd->crd_inject, -+ ivlen, cmd->iv); -+ } -+ } -+ } -+ -+ if (enccrd->crd_flags & CRD_F_KEY_EXPLICIT) -+ cmd->cry_masks |= HIFN_CRYPT_CMD_NEW_KEY; -+ cmd->ck = enccrd->crd_key; -+ cmd->cklen = enccrd->crd_klen >> 3; -+ cmd->cry_masks |= HIFN_CRYPT_CMD_NEW_KEY; -+ -+ /* -+ * Need to specify the size for the AES key in the masks. -+ */ -+ if ((cmd->cry_masks & HIFN_CRYPT_CMD_ALG_MASK) == -+ HIFN_CRYPT_CMD_ALG_AES) { -+ switch (cmd->cklen) { -+ case 16: -+ cmd->cry_masks |= HIFN_CRYPT_CMD_KSZ_128; -+ break; -+ case 24: -+ cmd->cry_masks |= HIFN_CRYPT_CMD_KSZ_192; -+ break; -+ case 32: -+ cmd->cry_masks |= HIFN_CRYPT_CMD_KSZ_256; -+ break; -+ default: -+ DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); -+ err = EINVAL; -+ goto errout; -+ } -+ } -+ } -+ -+ if (maccrd) { -+ cmd->maccrd = maccrd; -+ cmd->base_masks |= HIFN_BASE_CMD_MAC; -+ -+ switch (maccrd->crd_alg) { -+ case CRYPTO_MD5: -+ cmd->mac_masks |= HIFN_MAC_CMD_ALG_MD5 | -+ HIFN_MAC_CMD_RESULT | HIFN_MAC_CMD_MODE_HASH | -+ HIFN_MAC_CMD_POS_IPSEC; -+ break; -+ case CRYPTO_MD5_HMAC: -+ cmd->mac_masks |= HIFN_MAC_CMD_ALG_MD5 | -+ HIFN_MAC_CMD_RESULT | HIFN_MAC_CMD_MODE_HMAC | -+ HIFN_MAC_CMD_POS_IPSEC | HIFN_MAC_CMD_TRUNC; -+ break; -+ case CRYPTO_SHA1: -+ cmd->mac_masks |= HIFN_MAC_CMD_ALG_SHA1 | -+ HIFN_MAC_CMD_RESULT | HIFN_MAC_CMD_MODE_HASH | -+ HIFN_MAC_CMD_POS_IPSEC; -+ break; -+ case CRYPTO_SHA1_HMAC: -+ cmd->mac_masks |= HIFN_MAC_CMD_ALG_SHA1 | -+ HIFN_MAC_CMD_RESULT | HIFN_MAC_CMD_MODE_HMAC | -+ HIFN_MAC_CMD_POS_IPSEC | HIFN_MAC_CMD_TRUNC; -+ break; -+ } -+ -+ if (maccrd->crd_alg == CRYPTO_SHA1_HMAC || -+ maccrd->crd_alg == CRYPTO_MD5_HMAC) { -+ cmd->mac_masks |= HIFN_MAC_CMD_NEW_KEY; -+ bcopy(maccrd->crd_key, cmd->mac, maccrd->crd_klen >> 3); -+ bzero(cmd->mac + (maccrd->crd_klen >> 3), -+ HIFN_MAC_KEY_LENGTH - (maccrd->crd_klen >> 3)); -+ } -+ } -+ -+ cmd->crp = crp; -+ cmd->session_num = session; -+ cmd->softc = sc; -+ -+ err = hifn_crypto(sc, cmd, crp, hint); -+ if (!err) { -+ return 0; -+ } else if (err == ERESTART) { -+ /* -+ * There weren't enough resources to dispatch the request -+ * to the part. Notify the caller so they'll requeue this -+ * request and resubmit it again soon. -+ */ -+#ifdef HIFN_DEBUG -+ if (hifn_debug) -+ device_printf(sc->sc_dev, "requeue request\n"); -+#endif -+ kfree(cmd); -+ sc->sc_needwakeup |= CRYPTO_SYMQ; -+ return (err); -+ } -+ -+errout: -+ if (cmd != NULL) -+ kfree(cmd); -+ if (err == EINVAL) -+ hifnstats.hst_invalid++; -+ else -+ hifnstats.hst_nomem++; -+ crp->crp_etype = err; -+ crypto_done(crp); -+ return (err); -+} -+ -+static void -+hifn_abort(struct hifn_softc *sc) -+{ -+ struct hifn_dma *dma = sc->sc_dma; -+ struct hifn_command *cmd; -+ struct cryptop *crp; -+ int i, u; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ i = dma->resk; u = dma->resu; -+ while (u != 0) { -+ cmd = dma->hifn_commands[i]; -+ KASSERT(cmd != NULL, ("hifn_abort: null command slot %u", i)); -+ dma->hifn_commands[i] = NULL; -+ crp = cmd->crp; -+ -+ if ((dma->resr[i].l & htole32(HIFN_D_VALID)) == 0) { -+ /* Salvage what we can. */ -+ u_int8_t *macbuf; -+ -+ if (cmd->base_masks & HIFN_BASE_CMD_MAC) { -+ macbuf = dma->result_bufs[i]; -+ macbuf += 12; -+ } else -+ macbuf = NULL; -+ hifnstats.hst_opackets++; -+ hifn_callback(sc, cmd, macbuf); -+ } else { -+#if 0 -+ if (cmd->src_map == cmd->dst_map) { -+ bus_dmamap_sync(sc->sc_dmat, cmd->src_map, -+ BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); -+ } else { -+ bus_dmamap_sync(sc->sc_dmat, cmd->src_map, -+ BUS_DMASYNC_POSTWRITE); -+ bus_dmamap_sync(sc->sc_dmat, cmd->dst_map, -+ BUS_DMASYNC_POSTREAD); -+ } -+#endif -+ -+ if (cmd->src_skb != cmd->dst_skb) { -+#ifdef NOTYET -+ m_freem(cmd->src_m); -+ crp->crp_buf = (caddr_t)cmd->dst_m; -+#else -+ device_printf(sc->sc_dev, -+ "%s,%d: CRYPTO_F_SKBUF src != dst not implemented\n", -+ __FILE__, __LINE__); -+#endif -+ } -+ -+ /* non-shared buffers cannot be restarted */ -+ if (cmd->src_map != cmd->dst_map) { -+ /* -+ * XXX should be EAGAIN, delayed until -+ * after the reset. -+ */ -+ crp->crp_etype = ENOMEM; -+ pci_unmap_buf(sc, &cmd->dst); -+ } else -+ crp->crp_etype = ENOMEM; -+ -+ pci_unmap_buf(sc, &cmd->src); -+ -+ kfree(cmd); -+ if (crp->crp_etype != EAGAIN) -+ crypto_done(crp); -+ } -+ -+ if (++i == HIFN_D_RES_RSIZE) -+ i = 0; -+ u--; -+ } -+ dma->resk = i; dma->resu = u; -+ -+ hifn_reset_board(sc, 1); -+ hifn_init_dma(sc); -+ hifn_init_pci_registers(sc); -+} -+ -+static void -+hifn_callback(struct hifn_softc *sc, struct hifn_command *cmd, u_int8_t *macbuf) -+{ -+ struct hifn_dma *dma = sc->sc_dma; -+ struct cryptop *crp = cmd->crp; -+ struct cryptodesc *crd; -+ int i, u, ivlen; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+#if 0 -+ if (cmd->src_map == cmd->dst_map) { -+ bus_dmamap_sync(sc->sc_dmat, cmd->src_map, -+ BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); -+ } else { -+ bus_dmamap_sync(sc->sc_dmat, cmd->src_map, -+ BUS_DMASYNC_POSTWRITE); -+ bus_dmamap_sync(sc->sc_dmat, cmd->dst_map, -+ BUS_DMASYNC_POSTREAD); -+ } -+#endif -+ -+ if (crp->crp_flags & CRYPTO_F_SKBUF) { -+ if (cmd->src_skb != cmd->dst_skb) { -+#ifdef NOTYET -+ crp->crp_buf = (caddr_t)cmd->dst_m; -+ totlen = cmd->src_mapsize; -+ for (m = cmd->dst_m; m != NULL; m = m->m_next) { -+ if (totlen < m->m_len) { -+ m->m_len = totlen; -+ totlen = 0; -+ } else -+ totlen -= m->m_len; -+ } -+ cmd->dst_m->m_pkthdr.len = cmd->src_m->m_pkthdr.len; -+ m_freem(cmd->src_m); -+#else -+ device_printf(sc->sc_dev, -+ "%s,%d: CRYPTO_F_SKBUF src != dst not implemented\n", -+ __FILE__, __LINE__); -+#endif -+ } -+ } -+ -+ if (cmd->sloplen != 0) { -+ crypto_copyback(crp->crp_flags, crp->crp_buf, -+ cmd->src_mapsize - cmd->sloplen, cmd->sloplen, -+ (caddr_t)&dma->slop[cmd->slopidx]); -+ } -+ -+ i = dma->dstk; u = dma->dstu; -+ while (u != 0) { -+ if (i == HIFN_D_DST_RSIZE) -+ i = 0; -+#if 0 -+ bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap, -+ BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); -+#endif -+ if (dma->dstr[i].l & htole32(HIFN_D_VALID)) { -+#if 0 -+ bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap, -+ BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); -+#endif -+ break; -+ } -+ i++, u--; -+ } -+ dma->dstk = i; dma->dstu = u; -+ -+ hifnstats.hst_obytes += cmd->dst_mapsize; -+ -+ if ((cmd->base_masks & (HIFN_BASE_CMD_CRYPT | HIFN_BASE_CMD_DECODE)) == -+ HIFN_BASE_CMD_CRYPT) { -+ for (crd = crp->crp_desc; crd; crd = crd->crd_next) { -+ if (crd->crd_alg != CRYPTO_DES_CBC && -+ crd->crd_alg != CRYPTO_3DES_CBC && -+ crd->crd_alg != CRYPTO_AES_CBC) -+ continue; -+ ivlen = ((crd->crd_alg == CRYPTO_AES_CBC) ? -+ HIFN_AES_IV_LENGTH : HIFN_IV_LENGTH); -+ crypto_copydata(crp->crp_flags, crp->crp_buf, -+ crd->crd_skip + crd->crd_len - ivlen, ivlen, -+ cmd->softc->sc_sessions[cmd->session_num].hs_iv); -+ break; -+ } -+ } -+ -+ if (macbuf != NULL) { -+ for (crd = crp->crp_desc; crd; crd = crd->crd_next) { -+ int len; -+ -+ if (crd->crd_alg != CRYPTO_MD5 && -+ crd->crd_alg != CRYPTO_SHA1 && -+ crd->crd_alg != CRYPTO_MD5_HMAC && -+ crd->crd_alg != CRYPTO_SHA1_HMAC) { -+ continue; -+ } -+ len = cmd->softc->sc_sessions[cmd->session_num].hs_mlen; -+ crypto_copyback(crp->crp_flags, crp->crp_buf, -+ crd->crd_inject, len, macbuf); -+ break; -+ } -+ } -+ -+ if (cmd->src_map != cmd->dst_map) -+ pci_unmap_buf(sc, &cmd->dst); -+ pci_unmap_buf(sc, &cmd->src); -+ kfree(cmd); -+ crypto_done(crp); -+} -+ -+/* -+ * 7811 PB3 rev/2 parts lock-up on burst writes to Group 0 -+ * and Group 1 registers; avoid conditions that could create -+ * burst writes by doing a read in between the writes. -+ * -+ * NB: The read we interpose is always to the same register; -+ * we do this because reading from an arbitrary (e.g. last) -+ * register may not always work. -+ */ -+static void -+hifn_write_reg_0(struct hifn_softc *sc, bus_size_t reg, u_int32_t val) -+{ -+ if (sc->sc_flags & HIFN_IS_7811) { -+ if (sc->sc_bar0_lastreg == reg - 4) -+ readl(sc->sc_bar0 + HIFN_0_PUCNFG); -+ sc->sc_bar0_lastreg = reg; -+ } -+ writel(val, sc->sc_bar0 + reg); -+} -+ -+static void -+hifn_write_reg_1(struct hifn_softc *sc, bus_size_t reg, u_int32_t val) -+{ -+ if (sc->sc_flags & HIFN_IS_7811) { -+ if (sc->sc_bar1_lastreg == reg - 4) -+ readl(sc->sc_bar1 + HIFN_1_REVID); -+ sc->sc_bar1_lastreg = reg; -+ } -+ writel(val, sc->sc_bar1 + reg); -+} -+ -+ -+static struct pci_device_id hifn_pci_tbl[] = { -+ { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7951, -+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, -+ { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7955, -+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, -+ { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7956, -+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, -+ { PCI_VENDOR_NETSEC, PCI_PRODUCT_NETSEC_7751, -+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, -+ { PCI_VENDOR_INVERTEX, PCI_PRODUCT_INVERTEX_AEON, -+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, -+ { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7811, -+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, -+ /* -+ * Other vendors share this PCI ID as well, such as -+ * http://www.powercrypt.com, and obviously they also -+ * use the same key. -+ */ -+ { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7751, -+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, -+ { 0, 0, 0, 0, 0, 0, } -+}; -+MODULE_DEVICE_TABLE(pci, hifn_pci_tbl); -+ -+static struct pci_driver hifn_driver = { -+ .name = "hifn", -+ .id_table = hifn_pci_tbl, -+ .probe = hifn_probe, -+ .remove = hifn_remove, -+ /* add PM stuff here one day */ -+}; -+ -+static int __init hifn_init (void) -+{ -+ struct hifn_softc *sc = NULL; -+ int rc; -+ -+ DPRINTF("%s(%p)\n", __FUNCTION__, hifn_init); -+ -+ rc = pci_register_driver(&hifn_driver); -+ pci_register_driver_compat(&hifn_driver, rc); -+ -+ return rc; -+} -+ -+static void __exit hifn_exit (void) -+{ -+ pci_unregister_driver(&hifn_driver); -+} -+ -+module_init(hifn_init); -+module_exit(hifn_exit); -+ -+MODULE_LICENSE("BSD"); -+MODULE_AUTHOR("David McCullough <david_mccullough@securecomputing.com>"); -+MODULE_DESCRIPTION("OCF driver for hifn PCI crypto devices"); -diff -Nur linux-2.6.30.orig/crypto/ocf/hifn/hifn7751reg.h linux-2.6.30/crypto/ocf/hifn/hifn7751reg.h ---- linux-2.6.30.orig/crypto/ocf/hifn/hifn7751reg.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/hifn/hifn7751reg.h 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,540 @@ -+/* $FreeBSD: src/sys/dev/hifn/hifn7751reg.h,v 1.7 2007/03/21 03:42:49 sam Exp $ */ -+/* $OpenBSD: hifn7751reg.h,v 1.35 2002/04/08 17:49:42 jason Exp $ */ -+ -+/*- -+ * Invertex AEON / Hifn 7751 driver -+ * Copyright (c) 1999 Invertex Inc. All rights reserved. -+ * Copyright (c) 1999 Theo de Raadt -+ * Copyright (c) 2000-2001 Network Security Technologies, Inc. -+ * http://www.netsec.net -+ * -+ * Please send any comments, feedback, bug-fixes, or feature requests to -+ * software@invertex.com. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The name of the author may not be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * Effort sponsored in part by the Defense Advanced Research Projects -+ * Agency (DARPA) and Air Force Research Laboratory, Air Force -+ * Materiel Command, USAF, under agreement number F30602-01-2-0537. -+ * -+ */ -+#ifndef __HIFN_H__ -+#define __HIFN_H__ -+ -+/* -+ * Some PCI configuration space offset defines. The names were made -+ * identical to the names used by the Linux kernel. -+ */ -+#define HIFN_BAR0 PCIR_BAR(0) /* PUC register map */ -+#define HIFN_BAR1 PCIR_BAR(1) /* DMA register map */ -+#define HIFN_TRDY_TIMEOUT 0x40 -+#define HIFN_RETRY_TIMEOUT 0x41 -+ -+/* -+ * PCI vendor and device identifiers -+ * (the names are preserved from their OpenBSD source). -+ */ -+#define PCI_VENDOR_HIFN 0x13a3 /* Hifn */ -+#define PCI_PRODUCT_HIFN_7751 0x0005 /* 7751 */ -+#define PCI_PRODUCT_HIFN_6500 0x0006 /* 6500 */ -+#define PCI_PRODUCT_HIFN_7811 0x0007 /* 7811 */ -+#define PCI_PRODUCT_HIFN_7855 0x001f /* 7855 */ -+#define PCI_PRODUCT_HIFN_7951 0x0012 /* 7951 */ -+#define PCI_PRODUCT_HIFN_7955 0x0020 /* 7954/7955 */ -+#define PCI_PRODUCT_HIFN_7956 0x001d /* 7956 */ -+ -+#define PCI_VENDOR_INVERTEX 0x14e1 /* Invertex */ -+#define PCI_PRODUCT_INVERTEX_AEON 0x0005 /* AEON */ -+ -+#define PCI_VENDOR_NETSEC 0x1660 /* NetSec */ -+#define PCI_PRODUCT_NETSEC_7751 0x7751 /* 7751 */ -+ -+/* -+ * The values below should multiple of 4 -- and be large enough to handle -+ * any command the driver implements. -+ * -+ * MAX_COMMAND = base command + mac command + encrypt command + -+ * mac-key + rc4-key -+ * MAX_RESULT = base result + mac result + mac + encrypt result -+ * -+ * -+ */ -+#define HIFN_MAX_COMMAND (8 + 8 + 8 + 64 + 260) -+#define HIFN_MAX_RESULT (8 + 4 + 20 + 4) -+ -+/* -+ * hifn_desc_t -+ * -+ * Holds an individual descriptor for any of the rings. -+ */ -+typedef struct hifn_desc { -+ volatile u_int32_t l; /* length and status bits */ -+ volatile u_int32_t p; -+} hifn_desc_t; -+ -+/* -+ * Masks for the "length" field of struct hifn_desc. -+ */ -+#define HIFN_D_LENGTH 0x0000ffff /* length bit mask */ -+#define HIFN_D_MASKDONEIRQ 0x02000000 /* mask the done interrupt */ -+#define HIFN_D_DESTOVER 0x04000000 /* destination overflow */ -+#define HIFN_D_OVER 0x08000000 /* overflow */ -+#define HIFN_D_LAST 0x20000000 /* last descriptor in chain */ -+#define HIFN_D_JUMP 0x40000000 /* jump descriptor */ -+#define HIFN_D_VALID 0x80000000 /* valid bit */ -+ -+ -+/* -+ * Processing Unit Registers (offset from BASEREG0) -+ */ -+#define HIFN_0_PUDATA 0x00 /* Processing Unit Data */ -+#define HIFN_0_PUCTRL 0x04 /* Processing Unit Control */ -+#define HIFN_0_PUISR 0x08 /* Processing Unit Interrupt Status */ -+#define HIFN_0_PUCNFG 0x0c /* Processing Unit Configuration */ -+#define HIFN_0_PUIER 0x10 /* Processing Unit Interrupt Enable */ -+#define HIFN_0_PUSTAT 0x14 /* Processing Unit Status/Chip ID */ -+#define HIFN_0_FIFOSTAT 0x18 /* FIFO Status */ -+#define HIFN_0_FIFOCNFG 0x1c /* FIFO Configuration */ -+#define HIFN_0_PUCTRL2 0x28 /* Processing Unit Control (2nd map) */ -+#define HIFN_0_MUTE1 0x80 -+#define HIFN_0_MUTE2 0x90 -+#define HIFN_0_SPACESIZE 0x100 /* Register space size */ -+ -+/* Processing Unit Control Register (HIFN_0_PUCTRL) */ -+#define HIFN_PUCTRL_CLRSRCFIFO 0x0010 /* clear source fifo */ -+#define HIFN_PUCTRL_STOP 0x0008 /* stop pu */ -+#define HIFN_PUCTRL_LOCKRAM 0x0004 /* lock ram */ -+#define HIFN_PUCTRL_DMAENA 0x0002 /* enable dma */ -+#define HIFN_PUCTRL_RESET 0x0001 /* Reset processing unit */ -+ -+/* Processing Unit Interrupt Status Register (HIFN_0_PUISR) */ -+#define HIFN_PUISR_CMDINVAL 0x8000 /* Invalid command interrupt */ -+#define HIFN_PUISR_DATAERR 0x4000 /* Data error interrupt */ -+#define HIFN_PUISR_SRCFIFO 0x2000 /* Source FIFO ready interrupt */ -+#define HIFN_PUISR_DSTFIFO 0x1000 /* Destination FIFO ready interrupt */ -+#define HIFN_PUISR_DSTOVER 0x0200 /* Destination overrun interrupt */ -+#define HIFN_PUISR_SRCCMD 0x0080 /* Source command interrupt */ -+#define HIFN_PUISR_SRCCTX 0x0040 /* Source context interrupt */ -+#define HIFN_PUISR_SRCDATA 0x0020 /* Source data interrupt */ -+#define HIFN_PUISR_DSTDATA 0x0010 /* Destination data interrupt */ -+#define HIFN_PUISR_DSTRESULT 0x0004 /* Destination result interrupt */ -+ -+/* Processing Unit Configuration Register (HIFN_0_PUCNFG) */ -+#define HIFN_PUCNFG_DRAMMASK 0xe000 /* DRAM size mask */ -+#define HIFN_PUCNFG_DSZ_256K 0x0000 /* 256k dram */ -+#define HIFN_PUCNFG_DSZ_512K 0x2000 /* 512k dram */ -+#define HIFN_PUCNFG_DSZ_1M 0x4000 /* 1m dram */ -+#define HIFN_PUCNFG_DSZ_2M 0x6000 /* 2m dram */ -+#define HIFN_PUCNFG_DSZ_4M 0x8000 /* 4m dram */ -+#define HIFN_PUCNFG_DSZ_8M 0xa000 /* 8m dram */ -+#define HIFN_PUNCFG_DSZ_16M 0xc000 /* 16m dram */ -+#define HIFN_PUCNFG_DSZ_32M 0xe000 /* 32m dram */ -+#define HIFN_PUCNFG_DRAMREFRESH 0x1800 /* DRAM refresh rate mask */ -+#define HIFN_PUCNFG_DRFR_512 0x0000 /* 512 divisor of ECLK */ -+#define HIFN_PUCNFG_DRFR_256 0x0800 /* 256 divisor of ECLK */ -+#define HIFN_PUCNFG_DRFR_128 0x1000 /* 128 divisor of ECLK */ -+#define HIFN_PUCNFG_TCALLPHASES 0x0200 /* your guess is as good as mine... */ -+#define HIFN_PUCNFG_TCDRVTOTEM 0x0100 /* your guess is as good as mine... */ -+#define HIFN_PUCNFG_BIGENDIAN 0x0080 /* DMA big endian mode */ -+#define HIFN_PUCNFG_BUS32 0x0040 /* Bus width 32bits */ -+#define HIFN_PUCNFG_BUS16 0x0000 /* Bus width 16 bits */ -+#define HIFN_PUCNFG_CHIPID 0x0020 /* Allow chipid from PUSTAT */ -+#define HIFN_PUCNFG_DRAM 0x0010 /* Context RAM is DRAM */ -+#define HIFN_PUCNFG_SRAM 0x0000 /* Context RAM is SRAM */ -+#define HIFN_PUCNFG_COMPSING 0x0004 /* Enable single compression context */ -+#define HIFN_PUCNFG_ENCCNFG 0x0002 /* Encryption configuration */ -+ -+/* Processing Unit Interrupt Enable Register (HIFN_0_PUIER) */ -+#define HIFN_PUIER_CMDINVAL 0x8000 /* Invalid command interrupt */ -+#define HIFN_PUIER_DATAERR 0x4000 /* Data error interrupt */ -+#define HIFN_PUIER_SRCFIFO 0x2000 /* Source FIFO ready interrupt */ -+#define HIFN_PUIER_DSTFIFO 0x1000 /* Destination FIFO ready interrupt */ -+#define HIFN_PUIER_DSTOVER 0x0200 /* Destination overrun interrupt */ -+#define HIFN_PUIER_SRCCMD 0x0080 /* Source command interrupt */ -+#define HIFN_PUIER_SRCCTX 0x0040 /* Source context interrupt */ -+#define HIFN_PUIER_SRCDATA 0x0020 /* Source data interrupt */ -+#define HIFN_PUIER_DSTDATA 0x0010 /* Destination data interrupt */ -+#define HIFN_PUIER_DSTRESULT 0x0004 /* Destination result interrupt */ -+ -+/* Processing Unit Status Register/Chip ID (HIFN_0_PUSTAT) */ -+#define HIFN_PUSTAT_CMDINVAL 0x8000 /* Invalid command interrupt */ -+#define HIFN_PUSTAT_DATAERR 0x4000 /* Data error interrupt */ -+#define HIFN_PUSTAT_SRCFIFO 0x2000 /* Source FIFO ready interrupt */ -+#define HIFN_PUSTAT_DSTFIFO 0x1000 /* Destination FIFO ready interrupt */ -+#define HIFN_PUSTAT_DSTOVER 0x0200 /* Destination overrun interrupt */ -+#define HIFN_PUSTAT_SRCCMD 0x0080 /* Source command interrupt */ -+#define HIFN_PUSTAT_SRCCTX 0x0040 /* Source context interrupt */ -+#define HIFN_PUSTAT_SRCDATA 0x0020 /* Source data interrupt */ -+#define HIFN_PUSTAT_DSTDATA 0x0010 /* Destination data interrupt */ -+#define HIFN_PUSTAT_DSTRESULT 0x0004 /* Destination result interrupt */ -+#define HIFN_PUSTAT_CHIPREV 0x00ff /* Chip revision mask */ -+#define HIFN_PUSTAT_CHIPENA 0xff00 /* Chip enabled mask */ -+#define HIFN_PUSTAT_ENA_2 0x1100 /* Level 2 enabled */ -+#define HIFN_PUSTAT_ENA_1 0x1000 /* Level 1 enabled */ -+#define HIFN_PUSTAT_ENA_0 0x3000 /* Level 0 enabled */ -+#define HIFN_PUSTAT_REV_2 0x0020 /* 7751 PT6/2 */ -+#define HIFN_PUSTAT_REV_3 0x0030 /* 7751 PT6/3 */ -+ -+/* FIFO Status Register (HIFN_0_FIFOSTAT) */ -+#define HIFN_FIFOSTAT_SRC 0x7f00 /* Source FIFO available */ -+#define HIFN_FIFOSTAT_DST 0x007f /* Destination FIFO available */ -+ -+/* FIFO Configuration Register (HIFN_0_FIFOCNFG) */ -+#define HIFN_FIFOCNFG_THRESHOLD 0x0400 /* must be written as this value */ -+ -+/* -+ * DMA Interface Registers (offset from BASEREG1) -+ */ -+#define HIFN_1_DMA_CRAR 0x0c /* DMA Command Ring Address */ -+#define HIFN_1_DMA_SRAR 0x1c /* DMA Source Ring Address */ -+#define HIFN_1_DMA_RRAR 0x2c /* DMA Result Ring Address */ -+#define HIFN_1_DMA_DRAR 0x3c /* DMA Destination Ring Address */ -+#define HIFN_1_DMA_CSR 0x40 /* DMA Status and Control */ -+#define HIFN_1_DMA_IER 0x44 /* DMA Interrupt Enable */ -+#define HIFN_1_DMA_CNFG 0x48 /* DMA Configuration */ -+#define HIFN_1_PLL 0x4c /* 7955/7956: PLL config */ -+#define HIFN_1_7811_RNGENA 0x60 /* 7811: rng enable */ -+#define HIFN_1_7811_RNGCFG 0x64 /* 7811: rng config */ -+#define HIFN_1_7811_RNGDAT 0x68 /* 7811: rng data */ -+#define HIFN_1_7811_RNGSTS 0x6c /* 7811: rng status */ -+#define HIFN_1_DMA_CNFG2 0x6c /* 7955/7956: dma config #2 */ -+#define HIFN_1_7811_MIPSRST 0x94 /* 7811: MIPS reset */ -+#define HIFN_1_REVID 0x98 /* Revision ID */ -+ -+#define HIFN_1_PUB_RESET 0x204 /* Public/RNG Reset */ -+#define HIFN_1_PUB_BASE 0x300 /* Public Base Address */ -+#define HIFN_1_PUB_OPLEN 0x304 /* 7951-compat Public Operand Length */ -+#define HIFN_1_PUB_OP 0x308 /* 7951-compat Public Operand */ -+#define HIFN_1_PUB_STATUS 0x30c /* 7951-compat Public Status */ -+#define HIFN_1_PUB_IEN 0x310 /* Public Interrupt enable */ -+#define HIFN_1_RNG_CONFIG 0x314 /* RNG config */ -+#define HIFN_1_RNG_DATA 0x318 /* RNG data */ -+#define HIFN_1_PUB_MODE 0x320 /* PK mode */ -+#define HIFN_1_PUB_FIFO_OPLEN 0x380 /* first element of oplen fifo */ -+#define HIFN_1_PUB_FIFO_OP 0x384 /* first element of op fifo */ -+#define HIFN_1_PUB_MEM 0x400 /* start of Public key memory */ -+#define HIFN_1_PUB_MEMEND 0xbff /* end of Public key memory */ -+ -+/* DMA Status and Control Register (HIFN_1_DMA_CSR) */ -+#define HIFN_DMACSR_D_CTRLMASK 0xc0000000 /* Destinition Ring Control */ -+#define HIFN_DMACSR_D_CTRL_NOP 0x00000000 /* Dest. Control: no-op */ -+#define HIFN_DMACSR_D_CTRL_DIS 0x40000000 /* Dest. Control: disable */ -+#define HIFN_DMACSR_D_CTRL_ENA 0x80000000 /* Dest. Control: enable */ -+#define HIFN_DMACSR_D_ABORT 0x20000000 /* Destinition Ring PCIAbort */ -+#define HIFN_DMACSR_D_DONE 0x10000000 /* Destinition Ring Done */ -+#define HIFN_DMACSR_D_LAST 0x08000000 /* Destinition Ring Last */ -+#define HIFN_DMACSR_D_WAIT 0x04000000 /* Destinition Ring Waiting */ -+#define HIFN_DMACSR_D_OVER 0x02000000 /* Destinition Ring Overflow */ -+#define HIFN_DMACSR_R_CTRL 0x00c00000 /* Result Ring Control */ -+#define HIFN_DMACSR_R_CTRL_NOP 0x00000000 /* Result Control: no-op */ -+#define HIFN_DMACSR_R_CTRL_DIS 0x00400000 /* Result Control: disable */ -+#define HIFN_DMACSR_R_CTRL_ENA 0x00800000 /* Result Control: enable */ -+#define HIFN_DMACSR_R_ABORT 0x00200000 /* Result Ring PCI Abort */ -+#define HIFN_DMACSR_R_DONE 0x00100000 /* Result Ring Done */ -+#define HIFN_DMACSR_R_LAST 0x00080000 /* Result Ring Last */ -+#define HIFN_DMACSR_R_WAIT 0x00040000 /* Result Ring Waiting */ -+#define HIFN_DMACSR_R_OVER 0x00020000 /* Result Ring Overflow */ -+#define HIFN_DMACSR_S_CTRL 0x0000c000 /* Source Ring Control */ -+#define HIFN_DMACSR_S_CTRL_NOP 0x00000000 /* Source Control: no-op */ -+#define HIFN_DMACSR_S_CTRL_DIS 0x00004000 /* Source Control: disable */ -+#define HIFN_DMACSR_S_CTRL_ENA 0x00008000 /* Source Control: enable */ -+#define HIFN_DMACSR_S_ABORT 0x00002000 /* Source Ring PCI Abort */ -+#define HIFN_DMACSR_S_DONE 0x00001000 /* Source Ring Done */ -+#define HIFN_DMACSR_S_LAST 0x00000800 /* Source Ring Last */ -+#define HIFN_DMACSR_S_WAIT 0x00000400 /* Source Ring Waiting */ -+#define HIFN_DMACSR_ILLW 0x00000200 /* Illegal write (7811 only) */ -+#define HIFN_DMACSR_ILLR 0x00000100 /* Illegal read (7811 only) */ -+#define HIFN_DMACSR_C_CTRL 0x000000c0 /* Command Ring Control */ -+#define HIFN_DMACSR_C_CTRL_NOP 0x00000000 /* Command Control: no-op */ -+#define HIFN_DMACSR_C_CTRL_DIS 0x00000040 /* Command Control: disable */ -+#define HIFN_DMACSR_C_CTRL_ENA 0x00000080 /* Command Control: enable */ -+#define HIFN_DMACSR_C_ABORT 0x00000020 /* Command Ring PCI Abort */ -+#define HIFN_DMACSR_C_DONE 0x00000010 /* Command Ring Done */ -+#define HIFN_DMACSR_C_LAST 0x00000008 /* Command Ring Last */ -+#define HIFN_DMACSR_C_WAIT 0x00000004 /* Command Ring Waiting */ -+#define HIFN_DMACSR_PUBDONE 0x00000002 /* Public op done (7951 only) */ -+#define HIFN_DMACSR_ENGINE 0x00000001 /* Command Ring Engine IRQ */ -+ -+/* DMA Interrupt Enable Register (HIFN_1_DMA_IER) */ -+#define HIFN_DMAIER_D_ABORT 0x20000000 /* Destination Ring PCIAbort */ -+#define HIFN_DMAIER_D_DONE 0x10000000 /* Destination Ring Done */ -+#define HIFN_DMAIER_D_LAST 0x08000000 /* Destination Ring Last */ -+#define HIFN_DMAIER_D_WAIT 0x04000000 /* Destination Ring Waiting */ -+#define HIFN_DMAIER_D_OVER 0x02000000 /* Destination Ring Overflow */ -+#define HIFN_DMAIER_R_ABORT 0x00200000 /* Result Ring PCI Abort */ -+#define HIFN_DMAIER_R_DONE 0x00100000 /* Result Ring Done */ -+#define HIFN_DMAIER_R_LAST 0x00080000 /* Result Ring Last */ -+#define HIFN_DMAIER_R_WAIT 0x00040000 /* Result Ring Waiting */ -+#define HIFN_DMAIER_R_OVER 0x00020000 /* Result Ring Overflow */ -+#define HIFN_DMAIER_S_ABORT 0x00002000 /* Source Ring PCI Abort */ -+#define HIFN_DMAIER_S_DONE 0x00001000 /* Source Ring Done */ -+#define HIFN_DMAIER_S_LAST 0x00000800 /* Source Ring Last */ -+#define HIFN_DMAIER_S_WAIT 0x00000400 /* Source Ring Waiting */ -+#define HIFN_DMAIER_ILLW 0x00000200 /* Illegal write (7811 only) */ -+#define HIFN_DMAIER_ILLR 0x00000100 /* Illegal read (7811 only) */ -+#define HIFN_DMAIER_C_ABORT 0x00000020 /* Command Ring PCI Abort */ -+#define HIFN_DMAIER_C_DONE 0x00000010 /* Command Ring Done */ -+#define HIFN_DMAIER_C_LAST 0x00000008 /* Command Ring Last */ -+#define HIFN_DMAIER_C_WAIT 0x00000004 /* Command Ring Waiting */ -+#define HIFN_DMAIER_PUBDONE 0x00000002 /* public op done (7951 only) */ -+#define HIFN_DMAIER_ENGINE 0x00000001 /* Engine IRQ */ -+ -+/* DMA Configuration Register (HIFN_1_DMA_CNFG) */ -+#define HIFN_DMACNFG_BIGENDIAN 0x10000000 /* big endian mode */ -+#define HIFN_DMACNFG_POLLFREQ 0x00ff0000 /* Poll frequency mask */ -+#define HIFN_DMACNFG_UNLOCK 0x00000800 -+#define HIFN_DMACNFG_POLLINVAL 0x00000700 /* Invalid Poll Scalar */ -+#define HIFN_DMACNFG_LAST 0x00000010 /* Host control LAST bit */ -+#define HIFN_DMACNFG_MODE 0x00000004 /* DMA mode */ -+#define HIFN_DMACNFG_DMARESET 0x00000002 /* DMA Reset # */ -+#define HIFN_DMACNFG_MSTRESET 0x00000001 /* Master Reset # */ -+ -+/* DMA Configuration Register (HIFN_1_DMA_CNFG2) */ -+#define HIFN_DMACNFG2_PKSWAP32 (1 << 19) /* swap the OPLEN/OP reg */ -+#define HIFN_DMACNFG2_PKSWAP8 (1 << 18) /* swap the bits of OPLEN/OP */ -+#define HIFN_DMACNFG2_BAR0_SWAP32 (1<<17) /* swap the bytes of BAR0 */ -+#define HIFN_DMACNFG2_BAR1_SWAP8 (1<<16) /* swap the bits of BAR0 */ -+#define HIFN_DMACNFG2_INIT_WRITE_BURST_SHIFT 12 -+#define HIFN_DMACNFG2_INIT_READ_BURST_SHIFT 8 -+#define HIFN_DMACNFG2_TGT_WRITE_BURST_SHIFT 4 -+#define HIFN_DMACNFG2_TGT_READ_BURST_SHIFT 0 -+ -+/* 7811 RNG Enable Register (HIFN_1_7811_RNGENA) */ -+#define HIFN_7811_RNGENA_ENA 0x00000001 /* enable RNG */ -+ -+/* 7811 RNG Config Register (HIFN_1_7811_RNGCFG) */ -+#define HIFN_7811_RNGCFG_PRE1 0x00000f00 /* first prescalar */ -+#define HIFN_7811_RNGCFG_OPRE 0x00000080 /* output prescalar */ -+#define HIFN_7811_RNGCFG_DEFL 0x00000f80 /* 2 words/ 1/100 sec */ -+ -+/* 7811 RNG Status Register (HIFN_1_7811_RNGSTS) */ -+#define HIFN_7811_RNGSTS_RDY 0x00004000 /* two numbers in FIFO */ -+#define HIFN_7811_RNGSTS_UFL 0x00001000 /* rng underflow */ -+ -+/* 7811 MIPS Reset Register (HIFN_1_7811_MIPSRST) */ -+#define HIFN_MIPSRST_BAR2SIZE 0xffff0000 /* sdram size */ -+#define HIFN_MIPSRST_GPRAMINIT 0x00008000 /* gpram can be accessed */ -+#define HIFN_MIPSRST_CRAMINIT 0x00004000 /* ctxram can be accessed */ -+#define HIFN_MIPSRST_LED2 0x00000400 /* external LED2 */ -+#define HIFN_MIPSRST_LED1 0x00000200 /* external LED1 */ -+#define HIFN_MIPSRST_LED0 0x00000100 /* external LED0 */ -+#define HIFN_MIPSRST_MIPSDIS 0x00000004 /* disable MIPS */ -+#define HIFN_MIPSRST_MIPSRST 0x00000002 /* warm reset MIPS */ -+#define HIFN_MIPSRST_MIPSCOLD 0x00000001 /* cold reset MIPS */ -+ -+/* Public key reset register (HIFN_1_PUB_RESET) */ -+#define HIFN_PUBRST_RESET 0x00000001 /* reset public/rng unit */ -+ -+/* Public operation register (HIFN_1_PUB_OP) */ -+#define HIFN_PUBOP_AOFFSET 0x0000003e /* A offset */ -+#define HIFN_PUBOP_BOFFSET 0x00000fc0 /* B offset */ -+#define HIFN_PUBOP_MOFFSET 0x0003f000 /* M offset */ -+#define HIFN_PUBOP_OP_MASK 0x003c0000 /* Opcode: */ -+#define HIFN_PUBOP_OP_NOP 0x00000000 /* NOP */ -+#define HIFN_PUBOP_OP_ADD 0x00040000 /* ADD */ -+#define HIFN_PUBOP_OP_ADDC 0x00080000 /* ADD w/carry */ -+#define HIFN_PUBOP_OP_SUB 0x000c0000 /* SUB */ -+#define HIFN_PUBOP_OP_SUBC 0x00100000 /* SUB w/carry */ -+#define HIFN_PUBOP_OP_MODADD 0x00140000 /* Modular ADD */ -+#define HIFN_PUBOP_OP_MODSUB 0x00180000 /* Modular SUB */ -+#define HIFN_PUBOP_OP_INCA 0x001c0000 /* INC A */ -+#define HIFN_PUBOP_OP_DECA 0x00200000 /* DEC A */ -+#define HIFN_PUBOP_OP_MULT 0x00240000 /* MULT */ -+#define HIFN_PUBOP_OP_MODMULT 0x00280000 /* Modular MULT */ -+#define HIFN_PUBOP_OP_MODRED 0x002c0000 /* Modular Red */ -+#define HIFN_PUBOP_OP_MODEXP 0x00300000 /* Modular Exp */ -+ -+/* Public operand length register (HIFN_1_PUB_OPLEN) */ -+#define HIFN_PUBOPLEN_MODLEN 0x0000007f -+#define HIFN_PUBOPLEN_EXPLEN 0x0003ff80 -+#define HIFN_PUBOPLEN_REDLEN 0x003c0000 -+ -+/* Public status register (HIFN_1_PUB_STATUS) */ -+#define HIFN_PUBSTS_DONE 0x00000001 /* operation done */ -+#define HIFN_PUBSTS_CARRY 0x00000002 /* carry */ -+#define HIFN_PUBSTS_FIFO_EMPTY 0x00000100 /* fifo empty */ -+#define HIFN_PUBSTS_FIFO_FULL 0x00000200 /* fifo full */ -+#define HIFN_PUBSTS_FIFO_OVFL 0x00000400 /* fifo overflow */ -+#define HIFN_PUBSTS_FIFO_WRITE 0x000f0000 /* fifo write */ -+#define HIFN_PUBSTS_FIFO_READ 0x0f000000 /* fifo read */ -+ -+/* Public interrupt enable register (HIFN_1_PUB_IEN) */ -+#define HIFN_PUBIEN_DONE 0x00000001 /* operation done interrupt */ -+ -+/* Random number generator config register (HIFN_1_RNG_CONFIG) */ -+#define HIFN_RNGCFG_ENA 0x00000001 /* enable rng */ -+ -+/* -+ * Register offsets in register set 1 -+ */ -+ -+#define HIFN_UNLOCK_SECRET1 0xf4 -+#define HIFN_UNLOCK_SECRET2 0xfc -+ -+/* -+ * PLL config register -+ * -+ * This register is present only on 7954/7955/7956 parts. It must be -+ * programmed according to the bus interface method used by the h/w. -+ * Note that the parts require a stable clock. Since the PCI clock -+ * may vary the reference clock must usually be used. To avoid -+ * overclocking the core logic, setup must be done carefully, refer -+ * to the driver for details. The exact multiplier required varies -+ * by part and system configuration; refer to the Hifn documentation. -+ */ -+#define HIFN_PLL_REF_SEL 0x00000001 /* REF/HBI clk selection */ -+#define HIFN_PLL_BP 0x00000002 /* bypass (used during setup) */ -+/* bit 2 reserved */ -+#define HIFN_PLL_PK_CLK_SEL 0x00000008 /* public key clk select */ -+#define HIFN_PLL_PE_CLK_SEL 0x00000010 /* packet engine clk select */ -+/* bits 5-9 reserved */ -+#define HIFN_PLL_MBSET 0x00000400 /* must be set to 1 */ -+#define HIFN_PLL_ND 0x00003800 /* Fpll_ref multiplier select */ -+#define HIFN_PLL_ND_SHIFT 11 -+#define HIFN_PLL_ND_2 0x00000000 /* 2x */ -+#define HIFN_PLL_ND_4 0x00000800 /* 4x */ -+#define HIFN_PLL_ND_6 0x00001000 /* 6x */ -+#define HIFN_PLL_ND_8 0x00001800 /* 8x */ -+#define HIFN_PLL_ND_10 0x00002000 /* 10x */ -+#define HIFN_PLL_ND_12 0x00002800 /* 12x */ -+/* bits 14-15 reserved */ -+#define HIFN_PLL_IS 0x00010000 /* charge pump current select */ -+/* bits 17-31 reserved */ -+ -+/* -+ * Board configuration specifies only these bits. -+ */ -+#define HIFN_PLL_CONFIG (HIFN_PLL_IS|HIFN_PLL_ND|HIFN_PLL_REF_SEL) -+ -+/* -+ * Public Key Engine Mode Register -+ */ -+#define HIFN_PKMODE_HOSTINVERT (1 << 0) /* HOST INVERT */ -+#define HIFN_PKMODE_ENHANCED (1 << 1) /* Enable enhanced mode */ -+ -+ -+/********************************************************************* -+ * Structs for board commands -+ * -+ *********************************************************************/ -+ -+/* -+ * Structure to help build up the command data structure. -+ */ -+typedef struct hifn_base_command { -+ volatile u_int16_t masks; -+ volatile u_int16_t session_num; -+ volatile u_int16_t total_source_count; -+ volatile u_int16_t total_dest_count; -+} hifn_base_command_t; -+ -+#define HIFN_BASE_CMD_MAC 0x0400 -+#define HIFN_BASE_CMD_CRYPT 0x0800 -+#define HIFN_BASE_CMD_DECODE 0x2000 -+#define HIFN_BASE_CMD_SRCLEN_M 0xc000 -+#define HIFN_BASE_CMD_SRCLEN_S 14 -+#define HIFN_BASE_CMD_DSTLEN_M 0x3000 -+#define HIFN_BASE_CMD_DSTLEN_S 12 -+#define HIFN_BASE_CMD_LENMASK_HI 0x30000 -+#define HIFN_BASE_CMD_LENMASK_LO 0x0ffff -+ -+/* -+ * Structure to help build up the command data structure. -+ */ -+typedef struct hifn_crypt_command { -+ volatile u_int16_t masks; -+ volatile u_int16_t header_skip; -+ volatile u_int16_t source_count; -+ volatile u_int16_t reserved; -+} hifn_crypt_command_t; -+ -+#define HIFN_CRYPT_CMD_ALG_MASK 0x0003 /* algorithm: */ -+#define HIFN_CRYPT_CMD_ALG_DES 0x0000 /* DES */ -+#define HIFN_CRYPT_CMD_ALG_3DES 0x0001 /* 3DES */ -+#define HIFN_CRYPT_CMD_ALG_RC4 0x0002 /* RC4 */ -+#define HIFN_CRYPT_CMD_ALG_AES 0x0003 /* AES */ -+#define HIFN_CRYPT_CMD_MODE_MASK 0x0018 /* Encrypt mode: */ -+#define HIFN_CRYPT_CMD_MODE_ECB 0x0000 /* ECB */ -+#define HIFN_CRYPT_CMD_MODE_CBC 0x0008 /* CBC */ -+#define HIFN_CRYPT_CMD_MODE_CFB 0x0010 /* CFB */ -+#define HIFN_CRYPT_CMD_MODE_OFB 0x0018 /* OFB */ -+#define HIFN_CRYPT_CMD_CLR_CTX 0x0040 /* clear context */ -+#define HIFN_CRYPT_CMD_NEW_KEY 0x0800 /* expect new key */ -+#define HIFN_CRYPT_CMD_NEW_IV 0x1000 /* expect new iv */ -+ -+#define HIFN_CRYPT_CMD_SRCLEN_M 0xc000 -+#define HIFN_CRYPT_CMD_SRCLEN_S 14 -+ -+#define HIFN_CRYPT_CMD_KSZ_MASK 0x0600 /* AES key size: */ -+#define HIFN_CRYPT_CMD_KSZ_128 0x0000 /* 128 bit */ -+#define HIFN_CRYPT_CMD_KSZ_192 0x0200 /* 192 bit */ -+#define HIFN_CRYPT_CMD_KSZ_256 0x0400 /* 256 bit */ -+ -+/* -+ * Structure to help build up the command data structure. -+ */ -+typedef struct hifn_mac_command { -+ volatile u_int16_t masks; -+ volatile u_int16_t header_skip; -+ volatile u_int16_t source_count; -+ volatile u_int16_t reserved; -+} hifn_mac_command_t; -+ -+#define HIFN_MAC_CMD_ALG_MASK 0x0001 -+#define HIFN_MAC_CMD_ALG_SHA1 0x0000 -+#define HIFN_MAC_CMD_ALG_MD5 0x0001 -+#define HIFN_MAC_CMD_MODE_MASK 0x000c -+#define HIFN_MAC_CMD_MODE_HMAC 0x0000 -+#define HIFN_MAC_CMD_MODE_SSL_MAC 0x0004 -+#define HIFN_MAC_CMD_MODE_HASH 0x0008 -+#define HIFN_MAC_CMD_MODE_FULL 0x0004 -+#define HIFN_MAC_CMD_TRUNC 0x0010 -+#define HIFN_MAC_CMD_RESULT 0x0020 -+#define HIFN_MAC_CMD_APPEND 0x0040 -+#define HIFN_MAC_CMD_SRCLEN_M 0xc000 -+#define HIFN_MAC_CMD_SRCLEN_S 14 -+ -+/* -+ * MAC POS IPsec initiates authentication after encryption on encodes -+ * and before decryption on decodes. -+ */ -+#define HIFN_MAC_CMD_POS_IPSEC 0x0200 -+#define HIFN_MAC_CMD_NEW_KEY 0x0800 -+ -+/* -+ * The poll frequency and poll scalar defines are unshifted values used -+ * to set fields in the DMA Configuration Register. -+ */ -+#ifndef HIFN_POLL_FREQUENCY -+#define HIFN_POLL_FREQUENCY 0x1 -+#endif -+ -+#ifndef HIFN_POLL_SCALAR -+#define HIFN_POLL_SCALAR 0x0 -+#endif -+ -+#define HIFN_MAX_SEGLEN 0xffff /* maximum dma segment len */ -+#define HIFN_MAX_DMALEN 0x3ffff /* maximum dma length */ -+#endif /* __HIFN_H__ */ -diff -Nur linux-2.6.30.orig/crypto/ocf/hifn/hifn7751var.h linux-2.6.30/crypto/ocf/hifn/hifn7751var.h ---- linux-2.6.30.orig/crypto/ocf/hifn/hifn7751var.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/hifn/hifn7751var.h 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,369 @@ -+/* $FreeBSD: src/sys/dev/hifn/hifn7751var.h,v 1.9 2007/03/21 03:42:49 sam Exp $ */ -+/* $OpenBSD: hifn7751var.h,v 1.42 2002/04/08 17:49:42 jason Exp $ */ -+ -+/*- -+ * Invertex AEON / Hifn 7751 driver -+ * Copyright (c) 1999 Invertex Inc. All rights reserved. -+ * Copyright (c) 1999 Theo de Raadt -+ * Copyright (c) 2000-2001 Network Security Technologies, Inc. -+ * http://www.netsec.net -+ * -+ * Please send any comments, feedback, bug-fixes, or feature requests to -+ * software@invertex.com. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The name of the author may not be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * Effort sponsored in part by the Defense Advanced Research Projects -+ * Agency (DARPA) and Air Force Research Laboratory, Air Force -+ * Materiel Command, USAF, under agreement number F30602-01-2-0537. -+ * -+ */ -+ -+#ifndef __HIFN7751VAR_H__ -+#define __HIFN7751VAR_H__ -+ -+#ifdef __KERNEL__ -+ -+/* -+ * Some configurable values for the driver. By default command+result -+ * descriptor rings are the same size. The src+dst descriptor rings -+ * are sized at 3.5x the number of potential commands. Slower parts -+ * (e.g. 7951) tend to run out of src descriptors; faster parts (7811) -+ * src+cmd/result descriptors. It's not clear that increasing the size -+ * of the descriptor rings helps performance significantly as other -+ * factors tend to come into play (e.g. copying misaligned packets). -+ */ -+#define HIFN_D_CMD_RSIZE 24 /* command descriptors */ -+#define HIFN_D_SRC_RSIZE ((HIFN_D_CMD_RSIZE * 7) / 2) /* source descriptors */ -+#define HIFN_D_RES_RSIZE HIFN_D_CMD_RSIZE /* result descriptors */ -+#define HIFN_D_DST_RSIZE HIFN_D_SRC_RSIZE /* destination descriptors */ -+ -+/* -+ * Length values for cryptography -+ */ -+#define HIFN_DES_KEY_LENGTH 8 -+#define HIFN_3DES_KEY_LENGTH 24 -+#define HIFN_MAX_CRYPT_KEY_LENGTH HIFN_3DES_KEY_LENGTH -+#define HIFN_IV_LENGTH 8 -+#define HIFN_AES_IV_LENGTH 16 -+#define HIFN_MAX_IV_LENGTH HIFN_AES_IV_LENGTH -+ -+/* -+ * Length values for authentication -+ */ -+#define HIFN_MAC_KEY_LENGTH 64 -+#define HIFN_MD5_LENGTH 16 -+#define HIFN_SHA1_LENGTH 20 -+#define HIFN_MAC_TRUNC_LENGTH 12 -+ -+#define MAX_SCATTER 64 -+ -+/* -+ * Data structure to hold all 4 rings and any other ring related data. -+ */ -+struct hifn_dma { -+ /* -+ * Descriptor rings. We add +1 to the size to accomidate the -+ * jump descriptor. -+ */ -+ struct hifn_desc cmdr[HIFN_D_CMD_RSIZE+1]; -+ struct hifn_desc srcr[HIFN_D_SRC_RSIZE+1]; -+ struct hifn_desc dstr[HIFN_D_DST_RSIZE+1]; -+ struct hifn_desc resr[HIFN_D_RES_RSIZE+1]; -+ -+ struct hifn_command *hifn_commands[HIFN_D_RES_RSIZE]; -+ -+ u_char command_bufs[HIFN_D_CMD_RSIZE][HIFN_MAX_COMMAND]; -+ u_char result_bufs[HIFN_D_CMD_RSIZE][HIFN_MAX_RESULT]; -+ u_int32_t slop[HIFN_D_CMD_RSIZE]; -+ -+ u_int64_t test_src, test_dst; -+ -+ /* -+ * Our current positions for insertion and removal from the desriptor -+ * rings. -+ */ -+ int cmdi, srci, dsti, resi; -+ volatile int cmdu, srcu, dstu, resu; -+ int cmdk, srck, dstk, resk; -+}; -+ -+struct hifn_session { -+ int hs_used; -+ int hs_mlen; -+ u_int8_t hs_iv[HIFN_MAX_IV_LENGTH]; -+}; -+ -+#define HIFN_RING_SYNC(sc, r, i, f) \ -+ /* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */ -+ -+#define HIFN_CMDR_SYNC(sc, i, f) HIFN_RING_SYNC((sc), cmdr, (i), (f)) -+#define HIFN_RESR_SYNC(sc, i, f) HIFN_RING_SYNC((sc), resr, (i), (f)) -+#define HIFN_SRCR_SYNC(sc, i, f) HIFN_RING_SYNC((sc), srcr, (i), (f)) -+#define HIFN_DSTR_SYNC(sc, i, f) HIFN_RING_SYNC((sc), dstr, (i), (f)) -+ -+#define HIFN_CMD_SYNC(sc, i, f) \ -+ /* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */ -+ -+#define HIFN_RES_SYNC(sc, i, f) \ -+ /* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */ -+ -+typedef int bus_size_t; -+ -+/* -+ * Holds data specific to a single HIFN board. -+ */ -+struct hifn_softc { -+ softc_device_decl sc_dev; -+ -+ struct pci_dev *sc_pcidev; /* PCI device pointer */ -+ spinlock_t sc_mtx; /* per-instance lock */ -+ -+ int sc_num; /* for multiple devs */ -+ -+ ocf_iomem_t sc_bar0; -+ bus_size_t sc_bar0_lastreg;/* bar0 last reg written */ -+ ocf_iomem_t sc_bar1; -+ bus_size_t sc_bar1_lastreg;/* bar1 last reg written */ -+ -+ int sc_irq; -+ -+ u_int32_t sc_dmaier; -+ u_int32_t sc_drammodel; /* 1=dram, 0=sram */ -+ u_int32_t sc_pllconfig; /* 7954/7955/7956 PLL config */ -+ -+ struct hifn_dma *sc_dma; -+ dma_addr_t sc_dma_physaddr;/* physical address of sc_dma */ -+ -+ int sc_dmansegs; -+ int32_t sc_cid; -+ int sc_maxses; -+ int sc_nsessions; -+ struct hifn_session *sc_sessions; -+ int sc_ramsize; -+ int sc_flags; -+#define HIFN_HAS_RNG 0x1 /* includes random number generator */ -+#define HIFN_HAS_PUBLIC 0x2 /* includes public key support */ -+#define HIFN_HAS_AES 0x4 /* includes AES support */ -+#define HIFN_IS_7811 0x8 /* Hifn 7811 part */ -+#define HIFN_IS_7956 0x10 /* Hifn 7956/7955 don't have SDRAM */ -+ -+ struct timer_list sc_tickto; /* for managing DMA */ -+ -+ int sc_rngfirst; -+ int sc_rnghz; /* RNG polling frequency */ -+ -+ int sc_c_busy; /* command ring busy */ -+ int sc_s_busy; /* source data ring busy */ -+ int sc_d_busy; /* destination data ring busy */ -+ int sc_r_busy; /* result ring busy */ -+ int sc_active; /* for initial countdown */ -+ int sc_needwakeup; /* ops q'd wating on resources */ -+ int sc_curbatch; /* # ops submitted w/o int */ -+ int sc_suspended; -+#ifdef HIFN_VULCANDEV -+ struct cdev *sc_pkdev; -+#endif -+}; -+ -+#define HIFN_LOCK(_sc) spin_lock_irqsave(&(_sc)->sc_mtx, l_flags) -+#define HIFN_UNLOCK(_sc) spin_unlock_irqrestore(&(_sc)->sc_mtx, l_flags) -+ -+/* -+ * hifn_command_t -+ * -+ * This is the control structure used to pass commands to hifn_encrypt(). -+ * -+ * flags -+ * ----- -+ * Flags is the bitwise "or" values for command configuration. A single -+ * encrypt direction needs to be set: -+ * -+ * HIFN_ENCODE or HIFN_DECODE -+ * -+ * To use cryptography, a single crypto algorithm must be included: -+ * -+ * HIFN_CRYPT_3DES or HIFN_CRYPT_DES -+ * -+ * To use authentication is used, a single MAC algorithm must be included: -+ * -+ * HIFN_MAC_MD5 or HIFN_MAC_SHA1 -+ * -+ * By default MD5 uses a 16 byte hash and SHA-1 uses a 20 byte hash. -+ * If the value below is set, hash values are truncated or assumed -+ * truncated to 12 bytes: -+ * -+ * HIFN_MAC_TRUNC -+ * -+ * Keys for encryption and authentication can be sent as part of a command, -+ * or the last key value used with a particular session can be retrieved -+ * and used again if either of these flags are not specified. -+ * -+ * HIFN_CRYPT_NEW_KEY, HIFN_MAC_NEW_KEY -+ * -+ * session_num -+ * ----------- -+ * A number between 0 and 2048 (for DRAM models) or a number between -+ * 0 and 768 (for SRAM models). Those who don't want to use session -+ * numbers should leave value at zero and send a new crypt key and/or -+ * new MAC key on every command. If you use session numbers and -+ * don't send a key with a command, the last key sent for that same -+ * session number will be used. -+ * -+ * Warning: Using session numbers and multiboard at the same time -+ * is currently broken. -+ * -+ * mbuf -+ * ---- -+ * Either fill in the mbuf pointer and npa=0 or -+ * fill packp[] and packl[] and set npa to > 0 -+ * -+ * mac_header_skip -+ * --------------- -+ * The number of bytes of the source_buf that are skipped over before -+ * authentication begins. This must be a number between 0 and 2^16-1 -+ * and can be used by IPsec implementers to skip over IP headers. -+ * *** Value ignored if authentication not used *** -+ * -+ * crypt_header_skip -+ * ----------------- -+ * The number of bytes of the source_buf that are skipped over before -+ * the cryptographic operation begins. This must be a number between 0 -+ * and 2^16-1. For IPsec, this number will always be 8 bytes larger -+ * than the auth_header_skip (to skip over the ESP header). -+ * *** Value ignored if cryptography not used *** -+ * -+ */ -+struct hifn_operand { -+ union { -+ struct sk_buff *skb; -+ struct uio *io; -+ unsigned char *buf; -+ } u; -+ void *map; -+ bus_size_t mapsize; -+ int nsegs; -+ struct { -+ dma_addr_t ds_addr; -+ int ds_len; -+ } segs[MAX_SCATTER]; -+}; -+ -+struct hifn_command { -+ u_int16_t session_num; -+ u_int16_t base_masks, cry_masks, mac_masks; -+ u_int8_t iv[HIFN_MAX_IV_LENGTH], *ck, mac[HIFN_MAC_KEY_LENGTH]; -+ int cklen; -+ int sloplen, slopidx; -+ -+ struct hifn_operand src; -+ struct hifn_operand dst; -+ -+ struct hifn_softc *softc; -+ struct cryptop *crp; -+ struct cryptodesc *enccrd, *maccrd; -+}; -+ -+#define src_skb src.u.skb -+#define src_io src.u.io -+#define src_map src.map -+#define src_mapsize src.mapsize -+#define src_segs src.segs -+#define src_nsegs src.nsegs -+#define src_buf src.u.buf -+ -+#define dst_skb dst.u.skb -+#define dst_io dst.u.io -+#define dst_map dst.map -+#define dst_mapsize dst.mapsize -+#define dst_segs dst.segs -+#define dst_nsegs dst.nsegs -+#define dst_buf dst.u.buf -+ -+/* -+ * Return values for hifn_crypto() -+ */ -+#define HIFN_CRYPTO_SUCCESS 0 -+#define HIFN_CRYPTO_BAD_INPUT (-1) -+#define HIFN_CRYPTO_RINGS_FULL (-2) -+ -+/************************************************************************** -+ * -+ * Function: hifn_crypto -+ * -+ * Purpose: Called by external drivers to begin an encryption on the -+ * HIFN board. -+ * -+ * Blocking/Non-blocking Issues -+ * ============================ -+ * The driver cannot block in hifn_crypto (no calls to tsleep) currently. -+ * hifn_crypto() returns HIFN_CRYPTO_RINGS_FULL if there is not enough -+ * room in any of the rings for the request to proceed. -+ * -+ * Return Values -+ * ============= -+ * 0 for success, negative values on error -+ * -+ * Defines for negative error codes are: -+ * -+ * HIFN_CRYPTO_BAD_INPUT : The passed in command had invalid settings. -+ * HIFN_CRYPTO_RINGS_FULL : All DMA rings were full and non-blocking -+ * behaviour was requested. -+ * -+ *************************************************************************/ -+ -+/* -+ * Convert back and forth from 'sid' to 'card' and 'session' -+ */ -+#define HIFN_CARD(sid) (((sid) & 0xf0000000) >> 28) -+#define HIFN_SESSION(sid) ((sid) & 0x000007ff) -+#define HIFN_SID(crd,ses) (((crd) << 28) | ((ses) & 0x7ff)) -+ -+#endif /* _KERNEL */ -+ -+struct hifn_stats { -+ u_int64_t hst_ibytes; -+ u_int64_t hst_obytes; -+ u_int32_t hst_ipackets; -+ u_int32_t hst_opackets; -+ u_int32_t hst_invalid; -+ u_int32_t hst_nomem; /* malloc or one of hst_nomem_* */ -+ u_int32_t hst_abort; -+ u_int32_t hst_noirq; /* IRQ for no reason */ -+ u_int32_t hst_totbatch; /* ops submitted w/o interrupt */ -+ u_int32_t hst_maxbatch; /* max ops submitted together */ -+ u_int32_t hst_unaligned; /* unaligned src caused copy */ -+ /* -+ * The following divides hst_nomem into more specific buckets. -+ */ -+ u_int32_t hst_nomem_map; /* bus_dmamap_create failed */ -+ u_int32_t hst_nomem_load; /* bus_dmamap_load_* failed */ -+ u_int32_t hst_nomem_mbuf; /* MGET* failed */ -+ u_int32_t hst_nomem_mcl; /* MCLGET* failed */ -+ u_int32_t hst_nomem_cr; /* out of command/result descriptor */ -+ u_int32_t hst_nomem_sd; /* out of src/dst descriptors */ -+}; -+ -+#endif /* __HIFN7751VAR_H__ */ -diff -Nur linux-2.6.30.orig/crypto/ocf/hifn/hifnHIPP.c linux-2.6.30/crypto/ocf/hifn/hifnHIPP.c ---- linux-2.6.30.orig/crypto/ocf/hifn/hifnHIPP.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/hifn/hifnHIPP.c 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,420 @@ -+/*- -+ * Driver for Hifn HIPP-I/II chipset -+ * Copyright (c) 2006 Michael Richardson <mcr@xelerance.com> -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The name of the author may not be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * Effort sponsored by Hifn Inc. -+ * -+ */ -+ -+/* -+ * Driver for various Hifn encryption processors. -+ */ -+#ifndef AUTOCONF_INCLUDED -+#include <linux/config.h> -+#endif -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/list.h> -+#include <linux/slab.h> -+#include <linux/wait.h> -+#include <linux/sched.h> -+#include <linux/pci.h> -+#include <linux/delay.h> -+#include <linux/interrupt.h> -+#include <linux/spinlock.h> -+#include <linux/random.h> -+#include <linux/version.h> -+#include <linux/skbuff.h> -+#include <linux/uio.h> -+#include <linux/sysfs.h> -+#include <linux/miscdevice.h> -+#include <asm/io.h> -+ -+#include <cryptodev.h> -+ -+#include "hifnHIPPreg.h" -+#include "hifnHIPPvar.h" -+ -+#if 1 -+#define DPRINTF(a...) if (hipp_debug) { \ -+ printk("%s: ", sc ? \ -+ device_get_nameunit(sc->sc_dev) : "hifn"); \ -+ printk(a); \ -+ } else -+#else -+#define DPRINTF(a...) -+#endif -+ -+typedef int bus_size_t; -+ -+static inline int -+pci_get_revid(struct pci_dev *dev) -+{ -+ u8 rid = 0; -+ pci_read_config_byte(dev, PCI_REVISION_ID, &rid); -+ return rid; -+} -+ -+#define debug hipp_debug -+int hipp_debug = 0; -+module_param(hipp_debug, int, 0644); -+MODULE_PARM_DESC(hipp_debug, "Enable debug"); -+ -+int hipp_maxbatch = 1; -+module_param(hipp_maxbatch, int, 0644); -+MODULE_PARM_DESC(hipp_maxbatch, "max ops to batch w/o interrupt"); -+ -+static int hipp_probe(struct pci_dev *dev, const struct pci_device_id *ent); -+static void hipp_remove(struct pci_dev *dev); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) -+static irqreturn_t hipp_intr(int irq, void *arg); -+#else -+static irqreturn_t hipp_intr(int irq, void *arg, struct pt_regs *regs); -+#endif -+ -+static int hipp_num_chips = 0; -+static struct hipp_softc *hipp_chip_idx[HIPP_MAX_CHIPS]; -+ -+static int hipp_newsession(device_t, u_int32_t *, struct cryptoini *); -+static int hipp_freesession(device_t, u_int64_t); -+static int hipp_process(device_t, struct cryptop *, int); -+ -+static device_method_t hipp_methods = { -+ /* crypto device methods */ -+ DEVMETHOD(cryptodev_newsession, hipp_newsession), -+ DEVMETHOD(cryptodev_freesession,hipp_freesession), -+ DEVMETHOD(cryptodev_process, hipp_process), -+}; -+ -+static __inline u_int32_t -+READ_REG(struct hipp_softc *sc, unsigned int barno, bus_size_t reg) -+{ -+ u_int32_t v = readl(sc->sc_bar[barno] + reg); -+ //sc->sc_bar0_lastreg = (bus_size_t) -1; -+ return (v); -+} -+static __inline void -+WRITE_REG(struct hipp_softc *sc, unsigned int barno, bus_size_t reg, u_int32_t val) -+{ -+ writel(val, sc->sc_bar[barno] + reg); -+} -+ -+#define READ_REG_0(sc, reg) READ_REG(sc, 0, reg) -+#define WRITE_REG_0(sc, reg, val) WRITE_REG(sc,0, reg, val) -+#define READ_REG_1(sc, reg) READ_REG(sc, 1, reg) -+#define WRITE_REG_1(sc, reg, val) WRITE_REG(sc,1, reg, val) -+ -+static int -+hipp_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri) -+{ -+ return EINVAL; -+} -+ -+static int -+hipp_freesession(device_t dev, u_int64_t tid) -+{ -+ return EINVAL; -+} -+ -+static int -+hipp_process(device_t dev, struct cryptop *crp, int hint) -+{ -+ return EINVAL; -+} -+ -+static const char* -+hipp_partname(struct hipp_softc *sc, char buf[128], size_t blen) -+{ -+ char *n = NULL; -+ -+ switch (pci_get_vendor(sc->sc_pcidev)) { -+ case PCI_VENDOR_HIFN: -+ switch (pci_get_device(sc->sc_pcidev)) { -+ case PCI_PRODUCT_HIFN_7855: n = "Hifn 7855"; -+ case PCI_PRODUCT_HIFN_8155: n = "Hifn 8155"; -+ case PCI_PRODUCT_HIFN_6500: n = "Hifn 6500"; -+ } -+ } -+ -+ if(n==NULL) { -+ snprintf(buf, blen, "VID=%02x,PID=%02x", -+ pci_get_vendor(sc->sc_pcidev), -+ pci_get_device(sc->sc_pcidev)); -+ } else { -+ buf[0]='\0'; -+ strncat(buf, n, blen); -+ } -+ return buf; -+} -+ -+struct hipp_fs_entry { -+ struct attribute attr; -+ /* other stuff */ -+}; -+ -+ -+static ssize_t -+cryptoid_show(struct device *dev, -+ struct device_attribute *attr, -+ char *buf) -+{ -+ struct hipp_softc *sc; -+ -+ sc = pci_get_drvdata(to_pci_dev (dev)); -+ return sprintf (buf, "%d\n", sc->sc_cid); -+} -+ -+struct device_attribute hipp_dev_cryptoid = __ATTR_RO(cryptoid); -+ -+/* -+ * Attach an interface that successfully probed. -+ */ -+static int -+hipp_probe(struct pci_dev *dev, const struct pci_device_id *ent) -+{ -+ struct hipp_softc *sc = NULL; -+ int i; -+ //char rbase; -+ //u_int16_t ena; -+ int rev; -+ //int rseg; -+ int rc; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ if (pci_enable_device(dev) < 0) -+ return(-ENODEV); -+ -+ if (pci_set_mwi(dev)) -+ return(-ENODEV); -+ -+ if (!dev->irq) { -+ printk("hifn: found device with no IRQ assigned. check BIOS settings!"); -+ pci_disable_device(dev); -+ return(-ENODEV); -+ } -+ -+ sc = (struct hipp_softc *) kmalloc(sizeof(*sc), GFP_KERNEL); -+ if (!sc) -+ return(-ENOMEM); -+ memset(sc, 0, sizeof(*sc)); -+ -+ softc_device_init(sc, "hifn-hipp", hipp_num_chips, hipp_methods); -+ -+ sc->sc_pcidev = dev; -+ sc->sc_irq = -1; -+ sc->sc_cid = -1; -+ sc->sc_num = hipp_num_chips++; -+ -+ if (sc->sc_num < HIPP_MAX_CHIPS) -+ hipp_chip_idx[sc->sc_num] = sc; -+ -+ pci_set_drvdata(sc->sc_pcidev, sc); -+ -+ spin_lock_init(&sc->sc_mtx); -+ -+ /* -+ * Setup PCI resources. -+ * The READ_REG_0, WRITE_REG_0, READ_REG_1, -+ * and WRITE_REG_1 macros throughout the driver are used -+ * to permit better debugging. -+ */ -+ for(i=0; i<4; i++) { -+ unsigned long mem_start, mem_len; -+ mem_start = pci_resource_start(sc->sc_pcidev, i); -+ mem_len = pci_resource_len(sc->sc_pcidev, i); -+ sc->sc_barphy[i] = (caddr_t)mem_start; -+ sc->sc_bar[i] = (ocf_iomem_t) ioremap(mem_start, mem_len); -+ if (!sc->sc_bar[i]) { -+ device_printf(sc->sc_dev, "cannot map bar%d register space\n", i); -+ goto fail; -+ } -+ } -+ -+ //hipp_reset_board(sc, 0); -+ pci_set_master(sc->sc_pcidev); -+ -+ /* -+ * Arrange the interrupt line. -+ */ -+ rc = request_irq(dev->irq, hipp_intr, IRQF_SHARED, "hifn", sc); -+ if (rc) { -+ device_printf(sc->sc_dev, "could not map interrupt: %d\n", rc); -+ goto fail; -+ } -+ sc->sc_irq = dev->irq; -+ -+ rev = READ_REG_1(sc, HIPP_1_REVID) & 0xffff; -+ -+ { -+ char b[32]; -+ device_printf(sc->sc_dev, "%s, rev %u", -+ hipp_partname(sc, b, sizeof(b)), rev); -+ } -+ -+#if 0 -+ if (sc->sc_flags & HIFN_IS_7956) -+ printf(", pll=0x%x<%s clk, %ux mult>", -+ sc->sc_pllconfig, -+ sc->sc_pllconfig & HIFN_PLL_REF_SEL ? "ext" : "pci", -+ 2 + 2*((sc->sc_pllconfig & HIFN_PLL_ND) >> 11)); -+#endif -+ printf("\n"); -+ -+ sc->sc_cid = crypto_get_driverid(softc_get_device(sc),CRYPTOCAP_F_HARDWARE); -+ if (sc->sc_cid < 0) { -+ device_printf(sc->sc_dev, "could not get crypto driver id\n"); -+ goto fail; -+ } -+ -+#if 0 /* cannot work with a non-GPL module */ -+ /* make a sysfs entry to let the world know what entry we got */ -+ sysfs_create_file(&sc->sc_pcidev->dev.kobj, &hipp_dev_cryptoid.attr); -+#endif -+ -+#if 0 -+ init_timer(&sc->sc_tickto); -+ sc->sc_tickto.function = hifn_tick; -+ sc->sc_tickto.data = (unsigned long) sc->sc_num; -+ mod_timer(&sc->sc_tickto, jiffies + HZ); -+#endif -+ -+#if 0 /* no code here yet ?? */ -+ crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0); -+#endif -+ -+ return (0); -+ -+fail: -+ if (sc->sc_cid >= 0) -+ crypto_unregister_all(sc->sc_cid); -+ if (sc->sc_irq != -1) -+ free_irq(sc->sc_irq, sc); -+ -+#if 0 -+ if (sc->sc_dma) { -+ /* Turn off DMA polling */ -+ WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | -+ HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); -+ -+ pci_free_consistent(sc->sc_pcidev, -+ sizeof(*sc->sc_dma), -+ sc->sc_dma, sc->sc_dma_physaddr); -+ } -+#endif -+ kfree(sc); -+ return (-ENXIO); -+} -+ -+/* -+ * Detach an interface that successfully probed. -+ */ -+static void -+hipp_remove(struct pci_dev *dev) -+{ -+ struct hipp_softc *sc = pci_get_drvdata(dev); -+ unsigned long l_flags; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ /* disable interrupts */ -+ HIPP_LOCK(sc); -+ -+#if 0 -+ WRITE_REG_1(sc, HIFN_1_DMA_IER, 0); -+ HIFN_UNLOCK(sc); -+ -+ /*XXX other resources */ -+ del_timer_sync(&sc->sc_tickto); -+ -+ /* Turn off DMA polling */ -+ WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | -+ HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); -+#endif -+ -+ crypto_unregister_all(sc->sc_cid); -+ -+ free_irq(sc->sc_irq, sc); -+ -+#if 0 -+ pci_free_consistent(sc->sc_pcidev, sizeof(*sc->sc_dma), -+ sc->sc_dma, sc->sc_dma_physaddr); -+#endif -+} -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) -+static irqreturn_t hipp_intr(int irq, void *arg) -+#else -+static irqreturn_t hipp_intr(int irq, void *arg, struct pt_regs *regs) -+#endif -+{ -+ struct hipp_softc *sc = arg; -+ -+ sc = sc; /* shut up compiler */ -+ -+ return IRQ_HANDLED; -+} -+ -+static struct pci_device_id hipp_pci_tbl[] = { -+ { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7855, -+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, -+ { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_8155, -+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, -+}; -+MODULE_DEVICE_TABLE(pci, hipp_pci_tbl); -+ -+static struct pci_driver hipp_driver = { -+ .name = "hipp", -+ .id_table = hipp_pci_tbl, -+ .probe = hipp_probe, -+ .remove = hipp_remove, -+ /* add PM stuff here one day */ -+}; -+ -+static int __init hipp_init (void) -+{ -+ struct hipp_softc *sc = NULL; -+ int rc; -+ -+ DPRINTF("%s(%p)\n", __FUNCTION__, hipp_init); -+ -+ rc = pci_register_driver(&hipp_driver); -+ pci_register_driver_compat(&hipp_driver, rc); -+ -+ return rc; -+} -+ -+static void __exit hipp_exit (void) -+{ -+ pci_unregister_driver(&hipp_driver); -+} -+ -+module_init(hipp_init); -+module_exit(hipp_exit); -+ -+MODULE_LICENSE("BSD"); -+MODULE_AUTHOR("Michael Richardson <mcr@xelerance.com>"); -+MODULE_DESCRIPTION("OCF driver for hifn HIPP-I/II PCI crypto devices"); -diff -Nur linux-2.6.30.orig/crypto/ocf/hifn/hifnHIPPreg.h linux-2.6.30/crypto/ocf/hifn/hifnHIPPreg.h ---- linux-2.6.30.orig/crypto/ocf/hifn/hifnHIPPreg.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/hifn/hifnHIPPreg.h 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,46 @@ -+/*- -+ * Hifn HIPP-I/HIPP-II (7855/8155) driver. -+ * Copyright (c) 2006 Michael Richardson <mcr@xelerance.com> -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The name of the author may not be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * Effort sponsored by Hifn inc. -+ * -+ */ -+ -+#ifndef __HIFNHIPP_H__ -+#define __HIFNHIPP_H__ -+ -+/* -+ * PCI vendor and device identifiers -+ */ -+#define PCI_VENDOR_HIFN 0x13a3 /* Hifn */ -+#define PCI_PRODUCT_HIFN_6500 0x0006 /* 6500 */ -+#define PCI_PRODUCT_HIFN_7855 0x001f /* 7855 */ -+#define PCI_PRODUCT_HIFN_8155 0x999 /* XXX 8155 */ -+ -+#define HIPP_1_REVID 0x01 /* BOGUS */ -+ -+#endif /* __HIPP_H__ */ -diff -Nur linux-2.6.30.orig/crypto/ocf/hifn/hifnHIPPvar.h linux-2.6.30/crypto/ocf/hifn/hifnHIPPvar.h ---- linux-2.6.30.orig/crypto/ocf/hifn/hifnHIPPvar.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/hifn/hifnHIPPvar.h 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,93 @@ -+/* -+ * Hifn HIPP-I/HIPP-II (7855/8155) driver. -+ * Copyright (c) 2006 Michael Richardson <mcr@xelerance.com> * -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The name of the author may not be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * Effort sponsored by Hifn inc. -+ * -+ */ -+ -+#ifndef __HIFNHIPPVAR_H__ -+#define __HIFNHIPPVAR_H__ -+ -+#define HIPP_MAX_CHIPS 8 -+ -+/* -+ * Holds data specific to a single Hifn HIPP-I board. -+ */ -+struct hipp_softc { -+ softc_device_decl sc_dev; -+ -+ struct pci_dev *sc_pcidev; /* device backpointer */ -+ ocf_iomem_t sc_bar[5]; -+ caddr_t sc_barphy[5]; /* physical address */ -+ int sc_num; /* for multiple devs */ -+ spinlock_t sc_mtx; /* per-instance lock */ -+ int32_t sc_cid; -+ int sc_irq; -+ -+#if 0 -+ -+ u_int32_t sc_dmaier; -+ u_int32_t sc_drammodel; /* 1=dram, 0=sram */ -+ u_int32_t sc_pllconfig; /* 7954/7955/7956 PLL config */ -+ -+ struct hifn_dma *sc_dma; -+ dma_addr_t sc_dma_physaddr;/* physical address of sc_dma */ -+ -+ int sc_dmansegs; -+ int sc_maxses; -+ int sc_nsessions; -+ struct hifn_session *sc_sessions; -+ int sc_ramsize; -+ int sc_flags; -+#define HIFN_HAS_RNG 0x1 /* includes random number generator */ -+#define HIFN_HAS_PUBLIC 0x2 /* includes public key support */ -+#define HIFN_HAS_AES 0x4 /* includes AES support */ -+#define HIFN_IS_7811 0x8 /* Hifn 7811 part */ -+#define HIFN_IS_7956 0x10 /* Hifn 7956/7955 don't have SDRAM */ -+ -+ struct timer_list sc_tickto; /* for managing DMA */ -+ -+ int sc_rngfirst; -+ int sc_rnghz; /* RNG polling frequency */ -+ -+ int sc_c_busy; /* command ring busy */ -+ int sc_s_busy; /* source data ring busy */ -+ int sc_d_busy; /* destination data ring busy */ -+ int sc_r_busy; /* result ring busy */ -+ int sc_active; /* for initial countdown */ -+ int sc_needwakeup; /* ops q'd wating on resources */ -+ int sc_curbatch; /* # ops submitted w/o int */ -+ int sc_suspended; -+ struct miscdevice sc_miscdev; -+#endif -+}; -+ -+#define HIPP_LOCK(_sc) spin_lock_irqsave(&(_sc)->sc_mtx, l_flags) -+#define HIPP_UNLOCK(_sc) spin_unlock_irqrestore(&(_sc)->sc_mtx, l_flags) -+ -+#endif /* __HIFNHIPPVAR_H__ */ -diff -Nur linux-2.6.30.orig/crypto/ocf/hifn/Makefile linux-2.6.30/crypto/ocf/hifn/Makefile ---- linux-2.6.30.orig/crypto/ocf/hifn/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/hifn/Makefile 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,13 @@ -+# for SGlinux builds -+-include $(ROOTDIR)/modules/.config -+ -+obj-$(CONFIG_OCF_HIFN) += hifn7751.o -+obj-$(CONFIG_OCF_HIFNHIPP) += hifnHIPP.o -+ -+obj ?= . -+EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/ -+ -+ifdef TOPDIR -+-include $(TOPDIR)/Rules.make -+endif -+ -diff -Nur linux-2.6.30.orig/crypto/ocf/ixp4xx/ixp4xx.c linux-2.6.30/crypto/ocf/ixp4xx/ixp4xx.c ---- linux-2.6.30.orig/crypto/ocf/ixp4xx/ixp4xx.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/ixp4xx/ixp4xx.c 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,1328 @@ -+/* -+ * An OCF module that uses Intels IXP CryptACC API to do the crypto. -+ * This driver requires the IXP400 Access Library that is available -+ * from Intel in order to operate (or compile). -+ * -+ * Written by David McCullough <david_mccullough@securecomputing.com> -+ * Copyright (C) 2006-2007 David McCullough -+ * Copyright (C) 2004-2005 Intel Corporation. -+ * -+ * LICENSE TERMS -+ * -+ * The free distribution and use of this software in both source and binary -+ * form is allowed (with or without changes) provided that: -+ * -+ * 1. distributions of this source code include the above copyright -+ * notice, this list of conditions and the following disclaimer; -+ * -+ * 2. distributions in binary form include the above copyright -+ * notice, this list of conditions and the following disclaimer -+ * in the documentation and/or other associated materials; -+ * -+ * 3. the copyright holder's name is not used to endorse products -+ * built using this software without specific written permission. -+ * -+ * ALTERNATIVELY, provided that this notice is retained in full, this product -+ * may be distributed under the terms of the GNU General Public License (GPL), -+ * in which case the provisions of the GPL apply INSTEAD OF those given above. -+ * -+ * DISCLAIMER -+ * -+ * This software is provided 'as is' with no explicit or implied warranties -+ * in respect of its properties, including, but not limited to, correctness -+ * and/or fitness for purpose. -+ */ -+ -+#ifndef AUTOCONF_INCLUDED -+#include <linux/config.h> -+#endif -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/list.h> -+#include <linux/slab.h> -+#include <linux/sched.h> -+#include <linux/wait.h> -+#include <linux/crypto.h> -+#include <linux/interrupt.h> -+#include <asm/scatterlist.h> -+ -+#include <IxTypes.h> -+#include <IxOsBuffMgt.h> -+#include <IxNpeDl.h> -+#include <IxCryptoAcc.h> -+#include <IxQMgr.h> -+#include <IxOsServices.h> -+#include <IxOsCacheMMU.h> -+ -+#include <cryptodev.h> -+#include <uio.h> -+ -+#ifndef IX_MBUF_PRIV -+#define IX_MBUF_PRIV(x) ((x)->priv) -+#endif -+ -+struct ixp_data; -+ -+struct ixp_q { -+ struct list_head ixp_q_list; -+ struct ixp_data *ixp_q_data; -+ struct cryptop *ixp_q_crp; -+ struct cryptodesc *ixp_q_ccrd; -+ struct cryptodesc *ixp_q_acrd; -+ IX_MBUF ixp_q_mbuf; -+ UINT8 *ixp_hash_dest; /* Location for hash in client buffer */ -+ UINT8 *ixp_hash_src; /* Location of hash in internal buffer */ -+ unsigned char ixp_q_iv_data[IX_CRYPTO_ACC_MAX_CIPHER_IV_LENGTH]; -+ unsigned char *ixp_q_iv; -+}; -+ -+struct ixp_data { -+ int ixp_registered; /* is the context registered */ -+ int ixp_crd_flags; /* detect direction changes */ -+ -+ int ixp_cipher_alg; -+ int ixp_auth_alg; -+ -+ UINT32 ixp_ctx_id; -+ UINT32 ixp_hash_key_id; /* used when hashing */ -+ IxCryptoAccCtx ixp_ctx; -+ IX_MBUF ixp_pri_mbuf; -+ IX_MBUF ixp_sec_mbuf; -+ -+ struct work_struct ixp_pending_work; -+ struct work_struct ixp_registration_work; -+ struct list_head ixp_q; /* unprocessed requests */ -+}; -+ -+#ifdef __ixp46X -+ -+#define MAX_IOP_SIZE 64 /* words */ -+#define MAX_OOP_SIZE 128 -+ -+#define MAX_PARAMS 3 -+ -+struct ixp_pkq { -+ struct list_head pkq_list; -+ struct cryptkop *pkq_krp; -+ -+ IxCryptoAccPkeEauInOperands pkq_op; -+ IxCryptoAccPkeEauOpResult pkq_result; -+ -+ UINT32 pkq_ibuf0[MAX_IOP_SIZE]; -+ UINT32 pkq_ibuf1[MAX_IOP_SIZE]; -+ UINT32 pkq_ibuf2[MAX_IOP_SIZE]; -+ UINT32 pkq_obuf[MAX_OOP_SIZE]; -+}; -+ -+static LIST_HEAD(ixp_pkq); /* current PK wait list */ -+static struct ixp_pkq *ixp_pk_cur; -+static spinlock_t ixp_pkq_lock; -+ -+#endif /* __ixp46X */ -+ -+static int ixp_blocked = 0; -+ -+static int32_t ixp_id = -1; -+static struct ixp_data **ixp_sessions = NULL; -+static u_int32_t ixp_sesnum = 0; -+ -+static int ixp_process(device_t, struct cryptop *, int); -+static int ixp_newsession(device_t, u_int32_t *, struct cryptoini *); -+static int ixp_freesession(device_t, u_int64_t); -+#ifdef __ixp46X -+static int ixp_kprocess(device_t, struct cryptkop *krp, int hint); -+#endif -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) -+static kmem_cache_t *qcache; -+#else -+static struct kmem_cache *qcache; -+#endif -+ -+#define debug ixp_debug -+static int ixp_debug = 0; -+module_param(ixp_debug, int, 0644); -+MODULE_PARM_DESC(ixp_debug, "Enable debug"); -+ -+static int ixp_init_crypto = 1; -+module_param(ixp_init_crypto, int, 0444); /* RO after load/boot */ -+MODULE_PARM_DESC(ixp_init_crypto, "Call ixCryptoAccInit (default is 1)"); -+ -+static void ixp_process_pending(void *arg); -+static void ixp_registration(void *arg); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -+static void ixp_process_pending_wq(struct work_struct *work); -+static void ixp_registration_wq(struct work_struct *work); -+#endif -+ -+/* -+ * dummy device structure -+ */ -+ -+static struct { -+ softc_device_decl sc_dev; -+} ixpdev; -+ -+static device_method_t ixp_methods = { -+ /* crypto device methods */ -+ DEVMETHOD(cryptodev_newsession, ixp_newsession), -+ DEVMETHOD(cryptodev_freesession,ixp_freesession), -+ DEVMETHOD(cryptodev_process, ixp_process), -+#ifdef __ixp46X -+ DEVMETHOD(cryptodev_kprocess, ixp_kprocess), -+#endif -+}; -+ -+/* -+ * Generate a new software session. -+ */ -+static int -+ixp_newsession(device_t dev, u_int32_t *sid, struct cryptoini *cri) -+{ -+ struct ixp_data *ixp; -+ u_int32_t i; -+#define AUTH_LEN(cri, def) \ -+ (cri->cri_mlen ? cri->cri_mlen : (def)) -+ -+ dprintk("%s():alg %d\n", __FUNCTION__,cri->cri_alg); -+ if (sid == NULL || cri == NULL) { -+ dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__); -+ return EINVAL; -+ } -+ -+ if (ixp_sessions) { -+ for (i = 1; i < ixp_sesnum; i++) -+ if (ixp_sessions[i] == NULL) -+ break; -+ } else -+ i = 1; /* NB: to silence compiler warning */ -+ -+ if (ixp_sessions == NULL || i == ixp_sesnum) { -+ struct ixp_data **ixpd; -+ -+ if (ixp_sessions == NULL) { -+ i = 1; /* We leave ixp_sessions[0] empty */ -+ ixp_sesnum = CRYPTO_SW_SESSIONS; -+ } else -+ ixp_sesnum *= 2; -+ -+ ixpd = kmalloc(ixp_sesnum * sizeof(struct ixp_data *), SLAB_ATOMIC); -+ if (ixpd == NULL) { -+ /* Reset session number */ -+ if (ixp_sesnum == CRYPTO_SW_SESSIONS) -+ ixp_sesnum = 0; -+ else -+ ixp_sesnum /= 2; -+ dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); -+ return ENOBUFS; -+ } -+ memset(ixpd, 0, ixp_sesnum * sizeof(struct ixp_data *)); -+ -+ /* Copy existing sessions */ -+ if (ixp_sessions) { -+ memcpy(ixpd, ixp_sessions, -+ (ixp_sesnum / 2) * sizeof(struct ixp_data *)); -+ kfree(ixp_sessions); -+ } -+ -+ ixp_sessions = ixpd; -+ } -+ -+ ixp_sessions[i] = (struct ixp_data *) kmalloc(sizeof(struct ixp_data), -+ SLAB_ATOMIC); -+ if (ixp_sessions[i] == NULL) { -+ ixp_freesession(NULL, i); -+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); -+ return ENOBUFS; -+ } -+ -+ *sid = i; -+ -+ ixp = ixp_sessions[i]; -+ memset(ixp, 0, sizeof(*ixp)); -+ -+ ixp->ixp_cipher_alg = -1; -+ ixp->ixp_auth_alg = -1; -+ ixp->ixp_ctx_id = -1; -+ INIT_LIST_HEAD(&ixp->ixp_q); -+ -+ ixp->ixp_ctx.useDifferentSrcAndDestMbufs = 0; -+ -+ while (cri) { -+ switch (cri->cri_alg) { -+ case CRYPTO_DES_CBC: -+ ixp->ixp_cipher_alg = cri->cri_alg; -+ ixp->ixp_ctx.cipherCtx.cipherAlgo = IX_CRYPTO_ACC_CIPHER_DES; -+ ixp->ixp_ctx.cipherCtx.cipherMode = IX_CRYPTO_ACC_MODE_CBC; -+ ixp->ixp_ctx.cipherCtx.cipherKeyLen = (cri->cri_klen + 7) / 8; -+ ixp->ixp_ctx.cipherCtx.cipherBlockLen = IX_CRYPTO_ACC_DES_BLOCK_64; -+ ixp->ixp_ctx.cipherCtx.cipherInitialVectorLen = -+ IX_CRYPTO_ACC_DES_IV_64; -+ memcpy(ixp->ixp_ctx.cipherCtx.key.cipherKey, -+ cri->cri_key, (cri->cri_klen + 7) / 8); -+ break; -+ -+ case CRYPTO_3DES_CBC: -+ ixp->ixp_cipher_alg = cri->cri_alg; -+ ixp->ixp_ctx.cipherCtx.cipherAlgo = IX_CRYPTO_ACC_CIPHER_3DES; -+ ixp->ixp_ctx.cipherCtx.cipherMode = IX_CRYPTO_ACC_MODE_CBC; -+ ixp->ixp_ctx.cipherCtx.cipherKeyLen = (cri->cri_klen + 7) / 8; -+ ixp->ixp_ctx.cipherCtx.cipherBlockLen = IX_CRYPTO_ACC_DES_BLOCK_64; -+ ixp->ixp_ctx.cipherCtx.cipherInitialVectorLen = -+ IX_CRYPTO_ACC_DES_IV_64; -+ memcpy(ixp->ixp_ctx.cipherCtx.key.cipherKey, -+ cri->cri_key, (cri->cri_klen + 7) / 8); -+ break; -+ -+ case CRYPTO_RIJNDAEL128_CBC: -+ ixp->ixp_cipher_alg = cri->cri_alg; -+ ixp->ixp_ctx.cipherCtx.cipherAlgo = IX_CRYPTO_ACC_CIPHER_AES; -+ ixp->ixp_ctx.cipherCtx.cipherMode = IX_CRYPTO_ACC_MODE_CBC; -+ ixp->ixp_ctx.cipherCtx.cipherKeyLen = (cri->cri_klen + 7) / 8; -+ ixp->ixp_ctx.cipherCtx.cipherBlockLen = 16; -+ ixp->ixp_ctx.cipherCtx.cipherInitialVectorLen = 16; -+ memcpy(ixp->ixp_ctx.cipherCtx.key.cipherKey, -+ cri->cri_key, (cri->cri_klen + 7) / 8); -+ break; -+ -+ case CRYPTO_MD5: -+ case CRYPTO_MD5_HMAC: -+ ixp->ixp_auth_alg = cri->cri_alg; -+ ixp->ixp_ctx.authCtx.authAlgo = IX_CRYPTO_ACC_AUTH_MD5; -+ ixp->ixp_ctx.authCtx.authDigestLen = AUTH_LEN(cri, MD5_HASH_LEN); -+ ixp->ixp_ctx.authCtx.aadLen = 0; -+ /* Only MD5_HMAC needs a key */ -+ if (cri->cri_alg == CRYPTO_MD5_HMAC) { -+ ixp->ixp_ctx.authCtx.authKeyLen = (cri->cri_klen + 7) / 8; -+ if (ixp->ixp_ctx.authCtx.authKeyLen > -+ sizeof(ixp->ixp_ctx.authCtx.key.authKey)) { -+ printk( -+ "ixp4xx: Invalid key length for MD5_HMAC - %d bits\n", -+ cri->cri_klen); -+ ixp_freesession(NULL, i); -+ return EINVAL; -+ } -+ memcpy(ixp->ixp_ctx.authCtx.key.authKey, -+ cri->cri_key, (cri->cri_klen + 7) / 8); -+ } -+ break; -+ -+ case CRYPTO_SHA1: -+ case CRYPTO_SHA1_HMAC: -+ ixp->ixp_auth_alg = cri->cri_alg; -+ ixp->ixp_ctx.authCtx.authAlgo = IX_CRYPTO_ACC_AUTH_SHA1; -+ ixp->ixp_ctx.authCtx.authDigestLen = AUTH_LEN(cri, SHA1_HASH_LEN); -+ ixp->ixp_ctx.authCtx.aadLen = 0; -+ /* Only SHA1_HMAC needs a key */ -+ if (cri->cri_alg == CRYPTO_SHA1_HMAC) { -+ ixp->ixp_ctx.authCtx.authKeyLen = (cri->cri_klen + 7) / 8; -+ if (ixp->ixp_ctx.authCtx.authKeyLen > -+ sizeof(ixp->ixp_ctx.authCtx.key.authKey)) { -+ printk( -+ "ixp4xx: Invalid key length for SHA1_HMAC - %d bits\n", -+ cri->cri_klen); -+ ixp_freesession(NULL, i); -+ return EINVAL; -+ } -+ memcpy(ixp->ixp_ctx.authCtx.key.authKey, -+ cri->cri_key, (cri->cri_klen + 7) / 8); -+ } -+ break; -+ -+ default: -+ printk("ixp: unknown algo 0x%x\n", cri->cri_alg); -+ ixp_freesession(NULL, i); -+ return EINVAL; -+ } -+ cri = cri->cri_next; -+ } -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -+ INIT_WORK(&ixp->ixp_pending_work, ixp_process_pending_wq); -+ INIT_WORK(&ixp->ixp_registration_work, ixp_registration_wq); -+#else -+ INIT_WORK(&ixp->ixp_pending_work, ixp_process_pending, ixp); -+ INIT_WORK(&ixp->ixp_registration_work, ixp_registration, ixp); -+#endif -+ -+ return 0; -+} -+ -+ -+/* -+ * Free a session. -+ */ -+static int -+ixp_freesession(device_t dev, u_int64_t tid) -+{ -+ u_int32_t sid = CRYPTO_SESID2LID(tid); -+ -+ dprintk("%s()\n", __FUNCTION__); -+ if (sid > ixp_sesnum || ixp_sessions == NULL || -+ ixp_sessions[sid] == NULL) { -+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); -+ return EINVAL; -+ } -+ -+ /* Silently accept and return */ -+ if (sid == 0) -+ return 0; -+ -+ if (ixp_sessions[sid]) { -+ if (ixp_sessions[sid]->ixp_ctx_id != -1) { -+ ixCryptoAccCtxUnregister(ixp_sessions[sid]->ixp_ctx_id); -+ ixp_sessions[sid]->ixp_ctx_id = -1; -+ } -+ -+ flush_scheduled_work(); -+ -+ kfree(ixp_sessions[sid]); -+ } -+ ixp_sessions[sid] = NULL; -+ if (ixp_blocked) { -+ ixp_blocked = 0; -+ crypto_unblock(ixp_id, CRYPTO_SYMQ); -+ } -+ return 0; -+} -+ -+ -+/* -+ * callback for when hash processing is complete -+ */ -+ -+static void -+ixp_hash_perform_cb( -+ UINT32 hash_key_id, -+ IX_MBUF *bufp, -+ IxCryptoAccStatus status) -+{ -+ struct ixp_q *q; -+ -+ dprintk("%s(%u, %p, 0x%x)\n", __FUNCTION__, hash_key_id, bufp, status); -+ -+ if (bufp == NULL) { -+ printk("ixp: NULL buf in %s\n", __FUNCTION__); -+ return; -+ } -+ -+ q = IX_MBUF_PRIV(bufp); -+ if (q == NULL) { -+ printk("ixp: NULL priv in %s\n", __FUNCTION__); -+ return; -+ } -+ -+ if (status == IX_CRYPTO_ACC_STATUS_SUCCESS) { -+ /* On success, need to copy hash back into original client buffer */ -+ memcpy(q->ixp_hash_dest, q->ixp_hash_src, -+ (q->ixp_q_data->ixp_auth_alg == CRYPTO_SHA1) ? -+ SHA1_HASH_LEN : MD5_HASH_LEN); -+ } -+ else { -+ printk("ixp: hash perform failed status=%d\n", status); -+ q->ixp_q_crp->crp_etype = EINVAL; -+ } -+ -+ /* Free internal buffer used for hashing */ -+ kfree(IX_MBUF_MDATA(&q->ixp_q_mbuf)); -+ -+ crypto_done(q->ixp_q_crp); -+ kmem_cache_free(qcache, q); -+} -+ -+/* -+ * setup a request and perform it -+ */ -+static void -+ixp_q_process(struct ixp_q *q) -+{ -+ IxCryptoAccStatus status; -+ struct ixp_data *ixp = q->ixp_q_data; -+ int auth_off = 0; -+ int auth_len = 0; -+ int crypt_off = 0; -+ int crypt_len = 0; -+ int icv_off = 0; -+ char *crypt_func; -+ -+ dprintk("%s(%p)\n", __FUNCTION__, q); -+ -+ if (q->ixp_q_ccrd) { -+ if (q->ixp_q_ccrd->crd_flags & CRD_F_IV_EXPLICIT) { -+ q->ixp_q_iv = q->ixp_q_ccrd->crd_iv; -+ } else { -+ q->ixp_q_iv = q->ixp_q_iv_data; -+ crypto_copydata(q->ixp_q_crp->crp_flags, q->ixp_q_crp->crp_buf, -+ q->ixp_q_ccrd->crd_inject, -+ ixp->ixp_ctx.cipherCtx.cipherInitialVectorLen, -+ (caddr_t) q->ixp_q_iv); -+ } -+ -+ if (q->ixp_q_acrd) { -+ auth_off = q->ixp_q_acrd->crd_skip; -+ auth_len = q->ixp_q_acrd->crd_len; -+ icv_off = q->ixp_q_acrd->crd_inject; -+ } -+ -+ crypt_off = q->ixp_q_ccrd->crd_skip; -+ crypt_len = q->ixp_q_ccrd->crd_len; -+ } else { /* if (q->ixp_q_acrd) */ -+ auth_off = q->ixp_q_acrd->crd_skip; -+ auth_len = q->ixp_q_acrd->crd_len; -+ icv_off = q->ixp_q_acrd->crd_inject; -+ } -+ -+ if (q->ixp_q_crp->crp_flags & CRYPTO_F_SKBUF) { -+ struct sk_buff *skb = (struct sk_buff *) q->ixp_q_crp->crp_buf; -+ if (skb_shinfo(skb)->nr_frags) { -+ /* -+ * DAVIDM fix this limitation one day by using -+ * a buffer pool and chaining, it is not currently -+ * needed for current user/kernel space acceleration -+ */ -+ printk("ixp: Cannot handle fragmented skb's yet !\n"); -+ q->ixp_q_crp->crp_etype = ENOENT; -+ goto done; -+ } -+ IX_MBUF_MLEN(&q->ixp_q_mbuf) = -+ IX_MBUF_PKT_LEN(&q->ixp_q_mbuf) = skb->len; -+ IX_MBUF_MDATA(&q->ixp_q_mbuf) = skb->data; -+ } else if (q->ixp_q_crp->crp_flags & CRYPTO_F_IOV) { -+ struct uio *uiop = (struct uio *) q->ixp_q_crp->crp_buf; -+ if (uiop->uio_iovcnt != 1) { -+ /* -+ * DAVIDM fix this limitation one day by using -+ * a buffer pool and chaining, it is not currently -+ * needed for current user/kernel space acceleration -+ */ -+ printk("ixp: Cannot handle more than 1 iovec yet !\n"); -+ q->ixp_q_crp->crp_etype = ENOENT; -+ goto done; -+ } -+ IX_MBUF_MLEN(&q->ixp_q_mbuf) = -+ IX_MBUF_PKT_LEN(&q->ixp_q_mbuf) = uiop->uio_iov[0].iov_len; -+ IX_MBUF_MDATA(&q->ixp_q_mbuf) = uiop->uio_iov[0].iov_base; -+ } else /* contig buffer */ { -+ IX_MBUF_MLEN(&q->ixp_q_mbuf) = -+ IX_MBUF_PKT_LEN(&q->ixp_q_mbuf) = q->ixp_q_crp->crp_ilen; -+ IX_MBUF_MDATA(&q->ixp_q_mbuf) = q->ixp_q_crp->crp_buf; -+ } -+ -+ IX_MBUF_PRIV(&q->ixp_q_mbuf) = q; -+ -+ if (ixp->ixp_auth_alg == CRYPTO_SHA1 || ixp->ixp_auth_alg == CRYPTO_MD5) { -+ /* -+ * For SHA1 and MD5 hash, need to create an internal buffer that is big -+ * enough to hold the original data + the appropriate padding for the -+ * hash algorithm. -+ */ -+ UINT8 *tbuf = NULL; -+ -+ IX_MBUF_MLEN(&q->ixp_q_mbuf) = IX_MBUF_PKT_LEN(&q->ixp_q_mbuf) = -+ ((IX_MBUF_MLEN(&q->ixp_q_mbuf) * 8) + 72 + 511) / 8; -+ tbuf = kmalloc(IX_MBUF_MLEN(&q->ixp_q_mbuf), SLAB_ATOMIC); -+ -+ if (IX_MBUF_MDATA(&q->ixp_q_mbuf) == NULL) { -+ printk("ixp: kmalloc(%u, SLAB_ATOMIC) failed\n", -+ IX_MBUF_MLEN(&q->ixp_q_mbuf)); -+ q->ixp_q_crp->crp_etype = ENOMEM; -+ goto done; -+ } -+ memcpy(tbuf, &(IX_MBUF_MDATA(&q->ixp_q_mbuf))[auth_off], auth_len); -+ -+ /* Set location in client buffer to copy hash into */ -+ q->ixp_hash_dest = -+ &(IX_MBUF_MDATA(&q->ixp_q_mbuf))[auth_off + auth_len]; -+ -+ IX_MBUF_MDATA(&q->ixp_q_mbuf) = tbuf; -+ -+ /* Set location in internal buffer for where hash starts */ -+ q->ixp_hash_src = &(IX_MBUF_MDATA(&q->ixp_q_mbuf))[auth_len]; -+ -+ crypt_func = "ixCryptoAccHashPerform"; -+ status = ixCryptoAccHashPerform(ixp->ixp_ctx.authCtx.authAlgo, -+ &q->ixp_q_mbuf, ixp_hash_perform_cb, 0, auth_len, auth_len, -+ &ixp->ixp_hash_key_id); -+ } -+ else { -+ crypt_func = "ixCryptoAccAuthCryptPerform"; -+ status = ixCryptoAccAuthCryptPerform(ixp->ixp_ctx_id, &q->ixp_q_mbuf, -+ NULL, auth_off, auth_len, crypt_off, crypt_len, icv_off, -+ q->ixp_q_iv); -+ } -+ -+ if (IX_CRYPTO_ACC_STATUS_SUCCESS == status) -+ return; -+ -+ if (IX_CRYPTO_ACC_STATUS_QUEUE_FULL == status) { -+ q->ixp_q_crp->crp_etype = ENOMEM; -+ goto done; -+ } -+ -+ printk("ixp: %s failed %u\n", crypt_func, status); -+ q->ixp_q_crp->crp_etype = EINVAL; -+ -+done: -+ crypto_done(q->ixp_q_crp); -+ kmem_cache_free(qcache, q); -+} -+ -+ -+/* -+ * because we cannot process the Q from the Register callback -+ * we do it here on a task Q. -+ */ -+ -+static void -+ixp_process_pending(void *arg) -+{ -+ struct ixp_data *ixp = arg; -+ struct ixp_q *q = NULL; -+ -+ dprintk("%s(%p)\n", __FUNCTION__, arg); -+ -+ if (!ixp) -+ return; -+ -+ while (!list_empty(&ixp->ixp_q)) { -+ q = list_entry(ixp->ixp_q.next, struct ixp_q, ixp_q_list); -+ list_del(&q->ixp_q_list); -+ ixp_q_process(q); -+ } -+} -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -+static void -+ixp_process_pending_wq(struct work_struct *work) -+{ -+ struct ixp_data *ixp = container_of(work, struct ixp_data, -+ ixp_pending_work); -+ ixp_process_pending(ixp); -+} -+#endif -+ -+/* -+ * callback for when context registration is complete -+ */ -+ -+static void -+ixp_register_cb(UINT32 ctx_id, IX_MBUF *bufp, IxCryptoAccStatus status) -+{ -+ int i; -+ struct ixp_data *ixp; -+ struct ixp_q *q; -+ -+ dprintk("%s(%d, %p, %d)\n", __FUNCTION__, ctx_id, bufp, status); -+ -+ /* -+ * free any buffer passed in to this routine -+ */ -+ if (bufp) { -+ IX_MBUF_MLEN(bufp) = IX_MBUF_PKT_LEN(bufp) = 0; -+ kfree(IX_MBUF_MDATA(bufp)); -+ IX_MBUF_MDATA(bufp) = NULL; -+ } -+ -+ for (i = 0; i < ixp_sesnum; i++) { -+ ixp = ixp_sessions[i]; -+ if (ixp && ixp->ixp_ctx_id == ctx_id) -+ break; -+ } -+ if (i >= ixp_sesnum) { -+ printk("ixp: invalid context id %d\n", ctx_id); -+ return; -+ } -+ -+ if (IX_CRYPTO_ACC_STATUS_WAIT == status) { -+ /* this is normal to free the first of two buffers */ -+ dprintk("ixp: register not finished yet.\n"); -+ return; -+ } -+ -+ if (IX_CRYPTO_ACC_STATUS_SUCCESS != status) { -+ printk("ixp: register failed 0x%x\n", status); -+ while (!list_empty(&ixp->ixp_q)) { -+ q = list_entry(ixp->ixp_q.next, struct ixp_q, ixp_q_list); -+ list_del(&q->ixp_q_list); -+ q->ixp_q_crp->crp_etype = EINVAL; -+ crypto_done(q->ixp_q_crp); -+ kmem_cache_free(qcache, q); -+ } -+ return; -+ } -+ -+ /* -+ * we are now registered, we cannot start processing the Q here -+ * or we get strange errors with AES (DES/3DES seem to be ok). -+ */ -+ ixp->ixp_registered = 1; -+ schedule_work(&ixp->ixp_pending_work); -+} -+ -+ -+/* -+ * callback for when data processing is complete -+ */ -+ -+static void -+ixp_perform_cb( -+ UINT32 ctx_id, -+ IX_MBUF *sbufp, -+ IX_MBUF *dbufp, -+ IxCryptoAccStatus status) -+{ -+ struct ixp_q *q; -+ -+ dprintk("%s(%d, %p, %p, 0x%x)\n", __FUNCTION__, ctx_id, sbufp, -+ dbufp, status); -+ -+ if (sbufp == NULL) { -+ printk("ixp: NULL sbuf in ixp_perform_cb\n"); -+ return; -+ } -+ -+ q = IX_MBUF_PRIV(sbufp); -+ if (q == NULL) { -+ printk("ixp: NULL priv in ixp_perform_cb\n"); -+ return; -+ } -+ -+ if (status != IX_CRYPTO_ACC_STATUS_SUCCESS) { -+ printk("ixp: perform failed status=%d\n", status); -+ q->ixp_q_crp->crp_etype = EINVAL; -+ } -+ -+ crypto_done(q->ixp_q_crp); -+ kmem_cache_free(qcache, q); -+} -+ -+ -+/* -+ * registration is not callable at IRQ time, so we defer -+ * to a task queue, this routines completes the registration for us -+ * when the task queue runs -+ * -+ * Unfortunately this means we cannot tell OCF that the driver is blocked, -+ * we do that on the next request. -+ */ -+ -+static void -+ixp_registration(void *arg) -+{ -+ struct ixp_data *ixp = arg; -+ struct ixp_q *q = NULL; -+ IX_MBUF *pri = NULL, *sec = NULL; -+ int status = IX_CRYPTO_ACC_STATUS_SUCCESS; -+ -+ if (!ixp) { -+ printk("ixp: ixp_registration with no arg\n"); -+ return; -+ } -+ -+ if (ixp->ixp_ctx_id != -1) { -+ ixCryptoAccCtxUnregister(ixp->ixp_ctx_id); -+ ixp->ixp_ctx_id = -1; -+ } -+ -+ if (list_empty(&ixp->ixp_q)) { -+ printk("ixp: ixp_registration with no Q\n"); -+ return; -+ } -+ -+ /* -+ * setup the primary and secondary buffers -+ */ -+ q = list_entry(ixp->ixp_q.next, struct ixp_q, ixp_q_list); -+ if (q->ixp_q_acrd) { -+ pri = &ixp->ixp_pri_mbuf; -+ sec = &ixp->ixp_sec_mbuf; -+ IX_MBUF_MLEN(pri) = IX_MBUF_PKT_LEN(pri) = 128; -+ IX_MBUF_MDATA(pri) = (unsigned char *) kmalloc(128, SLAB_ATOMIC); -+ IX_MBUF_MLEN(sec) = IX_MBUF_PKT_LEN(sec) = 128; -+ IX_MBUF_MDATA(sec) = (unsigned char *) kmalloc(128, SLAB_ATOMIC); -+ } -+ -+ /* Only need to register if a crypt op or HMAC op */ -+ if (!(ixp->ixp_auth_alg == CRYPTO_SHA1 || -+ ixp->ixp_auth_alg == CRYPTO_MD5)) { -+ status = ixCryptoAccCtxRegister( -+ &ixp->ixp_ctx, -+ pri, sec, -+ ixp_register_cb, -+ ixp_perform_cb, -+ &ixp->ixp_ctx_id); -+ } -+ else { -+ /* Otherwise we start processing pending q */ -+ schedule_work(&ixp->ixp_pending_work); -+ } -+ -+ if (IX_CRYPTO_ACC_STATUS_SUCCESS == status) -+ return; -+ -+ if (IX_CRYPTO_ACC_STATUS_EXCEED_MAX_TUNNELS == status) { -+ printk("ixp: ixCryptoAccCtxRegister failed (out of tunnels)\n"); -+ ixp_blocked = 1; -+ /* perhaps we should return EGAIN on queued ops ? */ -+ return; -+ } -+ -+ printk("ixp: ixCryptoAccCtxRegister failed %d\n", status); -+ ixp->ixp_ctx_id = -1; -+ -+ /* -+ * everything waiting is toasted -+ */ -+ while (!list_empty(&ixp->ixp_q)) { -+ q = list_entry(ixp->ixp_q.next, struct ixp_q, ixp_q_list); -+ list_del(&q->ixp_q_list); -+ q->ixp_q_crp->crp_etype = ENOENT; -+ crypto_done(q->ixp_q_crp); -+ kmem_cache_free(qcache, q); -+ } -+} -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -+static void -+ixp_registration_wq(struct work_struct *work) -+{ -+ struct ixp_data *ixp = container_of(work, struct ixp_data, -+ ixp_registration_work); -+ ixp_registration(ixp); -+} -+#endif -+ -+/* -+ * Process a request. -+ */ -+static int -+ixp_process(device_t dev, struct cryptop *crp, int hint) -+{ -+ struct ixp_data *ixp; -+ unsigned int lid; -+ struct ixp_q *q = NULL; -+ int status; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ -+ /* Sanity check */ -+ if (crp == NULL) { -+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); -+ return EINVAL; -+ } -+ -+ crp->crp_etype = 0; -+ -+ if (ixp_blocked) -+ return ERESTART; -+ -+ if (crp->crp_desc == NULL || crp->crp_buf == NULL) { -+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); -+ crp->crp_etype = EINVAL; -+ goto done; -+ } -+ -+ /* -+ * find the session we are using -+ */ -+ -+ lid = crp->crp_sid & 0xffffffff; -+ if (lid >= ixp_sesnum || lid == 0 || ixp_sessions == NULL || -+ ixp_sessions[lid] == NULL) { -+ crp->crp_etype = ENOENT; -+ dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__); -+ goto done; -+ } -+ ixp = ixp_sessions[lid]; -+ -+ /* -+ * setup a new request ready for queuing -+ */ -+ q = kmem_cache_alloc(qcache, SLAB_ATOMIC); -+ if (q == NULL) { -+ dprintk("%s,%d: ENOMEM\n", __FILE__, __LINE__); -+ crp->crp_etype = ENOMEM; -+ goto done; -+ } -+ /* -+ * save some cycles by only zeroing the important bits -+ */ -+ memset(&q->ixp_q_mbuf, 0, sizeof(q->ixp_q_mbuf)); -+ q->ixp_q_ccrd = NULL; -+ q->ixp_q_acrd = NULL; -+ q->ixp_q_crp = crp; -+ q->ixp_q_data = ixp; -+ -+ /* -+ * point the cipher and auth descriptors appropriately -+ * check that we have something to do -+ */ -+ if (crp->crp_desc->crd_alg == ixp->ixp_cipher_alg) -+ q->ixp_q_ccrd = crp->crp_desc; -+ else if (crp->crp_desc->crd_alg == ixp->ixp_auth_alg) -+ q->ixp_q_acrd = crp->crp_desc; -+ else { -+ crp->crp_etype = ENOENT; -+ dprintk("%s,%d: bad desc match: ENOENT\n", __FILE__, __LINE__); -+ goto done; -+ } -+ if (crp->crp_desc->crd_next) { -+ if (crp->crp_desc->crd_next->crd_alg == ixp->ixp_cipher_alg) -+ q->ixp_q_ccrd = crp->crp_desc->crd_next; -+ else if (crp->crp_desc->crd_next->crd_alg == ixp->ixp_auth_alg) -+ q->ixp_q_acrd = crp->crp_desc->crd_next; -+ else { -+ crp->crp_etype = ENOENT; -+ dprintk("%s,%d: bad desc match: ENOENT\n", __FILE__, __LINE__); -+ goto done; -+ } -+ } -+ -+ /* -+ * If there is a direction change for this context then we mark it as -+ * unregistered and re-register is for the new direction. This is not -+ * a very expensive operation and currently only tends to happen when -+ * user-space application are doing benchmarks -+ * -+ * DM - we should be checking for pending requests before unregistering. -+ */ -+ if (q->ixp_q_ccrd && ixp->ixp_registered && -+ ixp->ixp_crd_flags != (q->ixp_q_ccrd->crd_flags & CRD_F_ENCRYPT)) { -+ dprintk("%s - detected direction change on session\n", __FUNCTION__); -+ ixp->ixp_registered = 0; -+ } -+ -+ /* -+ * if we are registered, call straight into the perform code -+ */ -+ if (ixp->ixp_registered) { -+ ixp_q_process(q); -+ return 0; -+ } -+ -+ /* -+ * the only part of the context not set in newsession is the direction -+ * dependent parts -+ */ -+ if (q->ixp_q_ccrd) { -+ ixp->ixp_crd_flags = (q->ixp_q_ccrd->crd_flags & CRD_F_ENCRYPT); -+ if (q->ixp_q_ccrd->crd_flags & CRD_F_ENCRYPT) { -+ ixp->ixp_ctx.operation = q->ixp_q_acrd ? -+ IX_CRYPTO_ACC_OP_ENCRYPT_AUTH : IX_CRYPTO_ACC_OP_ENCRYPT; -+ } else { -+ ixp->ixp_ctx.operation = q->ixp_q_acrd ? -+ IX_CRYPTO_ACC_OP_AUTH_DECRYPT : IX_CRYPTO_ACC_OP_DECRYPT; -+ } -+ } else { -+ /* q->ixp_q_acrd must be set if we are here */ -+ ixp->ixp_ctx.operation = IX_CRYPTO_ACC_OP_AUTH_CALC; -+ } -+ -+ status = list_empty(&ixp->ixp_q); -+ list_add_tail(&q->ixp_q_list, &ixp->ixp_q); -+ if (status) -+ schedule_work(&ixp->ixp_registration_work); -+ return 0; -+ -+done: -+ if (q) -+ kmem_cache_free(qcache, q); -+ crypto_done(crp); -+ return 0; -+} -+ -+ -+#ifdef __ixp46X -+/* -+ * key processing support for the ixp465 -+ */ -+ -+ -+/* -+ * copy a BN (LE) into a buffer (BE) an fill out the op appropriately -+ * assume zeroed and only copy bits that are significant -+ */ -+ -+static int -+ixp_copy_ibuf(struct crparam *p, IxCryptoAccPkeEauOperand *op, UINT32 *buf) -+{ -+ unsigned char *src = (unsigned char *) p->crp_p; -+ unsigned char *dst; -+ int len, bits = p->crp_nbits; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ -+ if (bits > MAX_IOP_SIZE * sizeof(UINT32) * 8) { -+ dprintk("%s - ibuf too big (%d > %d)\n", __FUNCTION__, -+ bits, MAX_IOP_SIZE * sizeof(UINT32) * 8); -+ return -1; -+ } -+ -+ len = (bits + 31) / 32; /* the number UINT32's needed */ -+ -+ dst = (unsigned char *) &buf[len]; -+ dst--; -+ -+ while (bits > 0) { -+ *dst-- = *src++; -+ bits -= 8; -+ } -+ -+#if 0 /* no need to zero remaining bits as it is done during request alloc */ -+ while (dst > (unsigned char *) buf) -+ *dst-- = '\0'; -+#endif -+ -+ op->pData = buf; -+ op->dataLen = len; -+ return 0; -+} -+ -+/* -+ * copy out the result, be as forgiving as we can about small output buffers -+ */ -+ -+static int -+ixp_copy_obuf(struct crparam *p, IxCryptoAccPkeEauOpResult *op, UINT32 *buf) -+{ -+ unsigned char *dst = (unsigned char *) p->crp_p; -+ unsigned char *src = (unsigned char *) buf; -+ int len, z, bits = p->crp_nbits; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ -+ len = op->dataLen * sizeof(UINT32); -+ -+ /* skip leading zeroes to be small buffer friendly */ -+ z = 0; -+ while (z < len && src[z] == '\0') -+ z++; -+ -+ src += len; -+ src--; -+ len -= z; -+ -+ while (len > 0 && bits > 0) { -+ *dst++ = *src--; -+ len--; -+ bits -= 8; -+ } -+ -+ while (bits > 0) { -+ *dst++ = '\0'; -+ bits -= 8; -+ } -+ -+ if (len > 0) { -+ dprintk("%s - obuf is %d (z=%d, ob=%d) bytes too small\n", -+ __FUNCTION__, len, z, p->crp_nbits / 8); -+ return -1; -+ } -+ -+ return 0; -+} -+ -+ -+/* -+ * the parameter offsets for exp_mod -+ */ -+ -+#define IXP_PARAM_BASE 0 -+#define IXP_PARAM_EXP 1 -+#define IXP_PARAM_MOD 2 -+#define IXP_PARAM_RES 3 -+ -+/* -+ * key processing complete callback, is also used to start processing -+ * by passing a NULL for pResult -+ */ -+ -+static void -+ixp_kperform_cb( -+ IxCryptoAccPkeEauOperation operation, -+ IxCryptoAccPkeEauOpResult *pResult, -+ BOOL carryOrBorrow, -+ IxCryptoAccStatus status) -+{ -+ struct ixp_pkq *q, *tmp; -+ unsigned long flags; -+ -+ dprintk("%s(0x%x, %p, %d, 0x%x)\n", __FUNCTION__, operation, pResult, -+ carryOrBorrow, status); -+ -+ /* handle a completed request */ -+ if (pResult) { -+ if (ixp_pk_cur && &ixp_pk_cur->pkq_result == pResult) { -+ q = ixp_pk_cur; -+ if (status != IX_CRYPTO_ACC_STATUS_SUCCESS) { -+ dprintk("%s() - op failed 0x%x\n", __FUNCTION__, status); -+ q->pkq_krp->krp_status = ERANGE; /* could do better */ -+ } else { -+ /* copy out the result */ -+ if (ixp_copy_obuf(&q->pkq_krp->krp_param[IXP_PARAM_RES], -+ &q->pkq_result, q->pkq_obuf)) -+ q->pkq_krp->krp_status = ERANGE; -+ } -+ crypto_kdone(q->pkq_krp); -+ kfree(q); -+ ixp_pk_cur = NULL; -+ } else -+ printk("%s - callback with invalid result pointer\n", __FUNCTION__); -+ } -+ -+ spin_lock_irqsave(&ixp_pkq_lock, flags); -+ if (ixp_pk_cur || list_empty(&ixp_pkq)) { -+ spin_unlock_irqrestore(&ixp_pkq_lock, flags); -+ return; -+ } -+ -+ list_for_each_entry_safe(q, tmp, &ixp_pkq, pkq_list) { -+ -+ list_del(&q->pkq_list); -+ ixp_pk_cur = q; -+ -+ spin_unlock_irqrestore(&ixp_pkq_lock, flags); -+ -+ status = ixCryptoAccPkeEauPerform( -+ IX_CRYPTO_ACC_OP_EAU_MOD_EXP, -+ &q->pkq_op, -+ ixp_kperform_cb, -+ &q->pkq_result); -+ -+ if (status == IX_CRYPTO_ACC_STATUS_SUCCESS) { -+ dprintk("%s() - ixCryptoAccPkeEauPerform SUCCESS\n", __FUNCTION__); -+ return; /* callback will return here for callback */ -+ } else if (status == IX_CRYPTO_ACC_STATUS_RETRY) { -+ printk("%s() - ixCryptoAccPkeEauPerform RETRY\n", __FUNCTION__); -+ } else { -+ printk("%s() - ixCryptoAccPkeEauPerform failed %d\n", -+ __FUNCTION__, status); -+ } -+ q->pkq_krp->krp_status = ERANGE; /* could do better */ -+ crypto_kdone(q->pkq_krp); -+ kfree(q); -+ spin_lock_irqsave(&ixp_pkq_lock, flags); -+ } -+ spin_unlock_irqrestore(&ixp_pkq_lock, flags); -+} -+ -+ -+static int -+ixp_kprocess(device_t dev, struct cryptkop *krp, int hint) -+{ -+ struct ixp_pkq *q; -+ int rc = 0; -+ unsigned long flags; -+ -+ dprintk("%s l1=%d l2=%d l3=%d l4=%d\n", __FUNCTION__, -+ krp->krp_param[IXP_PARAM_BASE].crp_nbits, -+ krp->krp_param[IXP_PARAM_EXP].crp_nbits, -+ krp->krp_param[IXP_PARAM_MOD].crp_nbits, -+ krp->krp_param[IXP_PARAM_RES].crp_nbits); -+ -+ -+ if (krp->krp_op != CRK_MOD_EXP) { -+ krp->krp_status = EOPNOTSUPP; -+ goto err; -+ } -+ -+ q = (struct ixp_pkq *) kmalloc(sizeof(*q), GFP_KERNEL); -+ if (q == NULL) { -+ krp->krp_status = ENOMEM; -+ goto err; -+ } -+ -+ /* -+ * The PKE engine does not appear to zero the output buffer -+ * appropriately, so we need to do it all here. -+ */ -+ memset(q, 0, sizeof(*q)); -+ -+ q->pkq_krp = krp; -+ INIT_LIST_HEAD(&q->pkq_list); -+ -+ if (ixp_copy_ibuf(&krp->krp_param[IXP_PARAM_BASE], &q->pkq_op.modExpOpr.M, -+ q->pkq_ibuf0)) -+ rc = 1; -+ if (!rc && ixp_copy_ibuf(&krp->krp_param[IXP_PARAM_EXP], -+ &q->pkq_op.modExpOpr.e, q->pkq_ibuf1)) -+ rc = 2; -+ if (!rc && ixp_copy_ibuf(&krp->krp_param[IXP_PARAM_MOD], -+ &q->pkq_op.modExpOpr.N, q->pkq_ibuf2)) -+ rc = 3; -+ -+ if (rc) { -+ kfree(q); -+ krp->krp_status = ERANGE; -+ goto err; -+ } -+ -+ q->pkq_result.pData = q->pkq_obuf; -+ q->pkq_result.dataLen = -+ (krp->krp_param[IXP_PARAM_RES].crp_nbits + 31) / 32; -+ -+ spin_lock_irqsave(&ixp_pkq_lock, flags); -+ list_add_tail(&q->pkq_list, &ixp_pkq); -+ spin_unlock_irqrestore(&ixp_pkq_lock, flags); -+ -+ if (!ixp_pk_cur) -+ ixp_kperform_cb(0, NULL, 0, 0); -+ return (0); -+ -+err: -+ crypto_kdone(krp); -+ return (0); -+} -+ -+ -+ -+#ifdef CONFIG_OCF_RANDOMHARVEST -+/* -+ * We run the random number generator output through SHA so that it -+ * is FIPS compliant. -+ */ -+ -+static volatile int sha_done = 0; -+static unsigned char sha_digest[20]; -+ -+static void -+ixp_hash_cb(UINT8 *digest, IxCryptoAccStatus status) -+{ -+ dprintk("%s(%p, %d)\n", __FUNCTION__, digest, status); -+ if (sha_digest != digest) -+ printk("digest error\n"); -+ if (IX_CRYPTO_ACC_STATUS_SUCCESS == status) -+ sha_done = 1; -+ else -+ sha_done = -status; -+} -+ -+static int -+ixp_read_random(void *arg, u_int32_t *buf, int maxwords) -+{ -+ IxCryptoAccStatus status; -+ int i, n, rc; -+ -+ dprintk("%s(%p, %d)\n", __FUNCTION__, buf, maxwords); -+ memset(buf, 0, maxwords * sizeof(*buf)); -+ status = ixCryptoAccPkePseudoRandomNumberGet(maxwords, buf); -+ if (status != IX_CRYPTO_ACC_STATUS_SUCCESS) { -+ dprintk("%s: ixCryptoAccPkePseudoRandomNumberGet failed %d\n", -+ __FUNCTION__, status); -+ return 0; -+ } -+ -+ /* -+ * run the random data through SHA to make it look more random -+ */ -+ -+ n = sizeof(sha_digest); /* process digest bytes at a time */ -+ -+ rc = 0; -+ for (i = 0; i < maxwords; i += n / sizeof(*buf)) { -+ if ((maxwords - i) * sizeof(*buf) < n) -+ n = (maxwords - i) * sizeof(*buf); -+ sha_done = 0; -+ status = ixCryptoAccPkeHashPerform(IX_CRYPTO_ACC_AUTH_SHA1, -+ (UINT8 *) &buf[i], n, ixp_hash_cb, sha_digest); -+ if (status != IX_CRYPTO_ACC_STATUS_SUCCESS) { -+ dprintk("ixCryptoAccPkeHashPerform failed %d\n", status); -+ return -EIO; -+ } -+ while (!sha_done) -+ schedule(); -+ if (sha_done < 0) { -+ dprintk("ixCryptoAccPkeHashPerform failed CB %d\n", -sha_done); -+ return 0; -+ } -+ memcpy(&buf[i], sha_digest, n); -+ rc += n / sizeof(*buf);; -+ } -+ -+ return rc; -+} -+#endif /* CONFIG_OCF_RANDOMHARVEST */ -+ -+#endif /* __ixp46X */ -+ -+ -+ -+/* -+ * our driver startup and shutdown routines -+ */ -+ -+static int -+ixp_init(void) -+{ -+ dprintk("%s(%p)\n", __FUNCTION__, ixp_init); -+ -+ if (ixp_init_crypto && ixCryptoAccInit() != IX_CRYPTO_ACC_STATUS_SUCCESS) -+ printk("ixCryptoAccInit failed, assuming already initialised!\n"); -+ -+ qcache = kmem_cache_create("ixp4xx_q", sizeof(struct ixp_q), 0, -+ SLAB_HWCACHE_ALIGN, NULL -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) -+ , NULL -+#endif -+ ); -+ if (!qcache) { -+ printk("failed to create Qcache\n"); -+ return -ENOENT; -+ } -+ -+ memset(&ixpdev, 0, sizeof(ixpdev)); -+ softc_device_init(&ixpdev, "ixp4xx", 0, ixp_methods); -+ -+ ixp_id = crypto_get_driverid(softc_get_device(&ixpdev), -+ CRYPTOCAP_F_HARDWARE); -+ if (ixp_id < 0) -+ panic("IXP/OCF crypto device cannot initialize!"); -+ -+#define REGISTER(alg) \ -+ crypto_register(ixp_id,alg,0,0) -+ -+ REGISTER(CRYPTO_DES_CBC); -+ REGISTER(CRYPTO_3DES_CBC); -+ REGISTER(CRYPTO_RIJNDAEL128_CBC); -+#ifdef CONFIG_OCF_IXP4XX_SHA1_MD5 -+ REGISTER(CRYPTO_MD5); -+ REGISTER(CRYPTO_SHA1); -+#endif -+ REGISTER(CRYPTO_MD5_HMAC); -+ REGISTER(CRYPTO_SHA1_HMAC); -+#undef REGISTER -+ -+#ifdef __ixp46X -+ spin_lock_init(&ixp_pkq_lock); -+ /* -+ * we do not enable the go fast options here as they can potentially -+ * allow timing based attacks -+ * -+ * http://www.openssl.org/news/secadv_20030219.txt -+ */ -+ ixCryptoAccPkeEauExpConfig(0, 0); -+ crypto_kregister(ixp_id, CRK_MOD_EXP, 0); -+#ifdef CONFIG_OCF_RANDOMHARVEST -+ crypto_rregister(ixp_id, ixp_read_random, NULL); -+#endif -+#endif -+ -+ return 0; -+} -+ -+static void -+ixp_exit(void) -+{ -+ dprintk("%s()\n", __FUNCTION__); -+ crypto_unregister_all(ixp_id); -+ ixp_id = -1; -+ kmem_cache_destroy(qcache); -+ qcache = NULL; -+} -+ -+module_init(ixp_init); -+module_exit(ixp_exit); -+ -+MODULE_LICENSE("Dual BSD/GPL"); -+MODULE_AUTHOR("David McCullough <dmccullough@cyberguard.com>"); -+MODULE_DESCRIPTION("ixp (OCF module for IXP4xx crypto)"); -diff -Nur linux-2.6.30.orig/crypto/ocf/ixp4xx/Makefile linux-2.6.30/crypto/ocf/ixp4xx/Makefile ---- linux-2.6.30.orig/crypto/ocf/ixp4xx/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/ixp4xx/Makefile 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,104 @@ -+# for SGlinux builds -+-include $(ROOTDIR)/modules/.config -+ -+# -+# You will need to point this at your Intel ixp425 includes, this portion -+# of the Makefile only really works under SGLinux with the appropriate libs -+# installed. They can be downloaded from http://www.snapgear.org/ -+# -+ifeq ($(CONFIG_CPU_IXP46X),y) -+IXPLATFORM = ixp46X -+else -+ifeq ($(CONFIG_CPU_IXP43X),y) -+IXPLATFORM = ixp43X -+else -+IXPLATFORM = ixp42X -+endif -+endif -+ -+ifdef CONFIG_IXP400_LIB_2_4 -+IX_XSCALE_SW = $(ROOTDIR)/modules/ixp425/ixp400-2.4/ixp400_xscale_sw -+OSAL_DIR = $(ROOTDIR)/modules/ixp425/ixp400-2.4/ixp_osal -+endif -+ifdef CONFIG_IXP400_LIB_2_1 -+IX_XSCALE_SW = $(ROOTDIR)/modules/ixp425/ixp400-2.1/ixp400_xscale_sw -+OSAL_DIR = $(ROOTDIR)/modules/ixp425/ixp400-2.1/ixp_osal -+endif -+ifdef CONFIG_IXP400_LIB_2_0 -+IX_XSCALE_SW = $(ROOTDIR)/modules/ixp425/ixp400-2.0/ixp400_xscale_sw -+OSAL_DIR = $(ROOTDIR)/modules/ixp425/ixp400-2.0/ixp_osal -+endif -+ifdef IX_XSCALE_SW -+ifdef CONFIG_IXP400_LIB_2_4 -+IXP_CFLAGS = \ -+ -I$(ROOTDIR)/. \ -+ -I$(IX_XSCALE_SW)/src/include \ -+ -I$(OSAL_DIR)/common/include/ \ -+ -I$(OSAL_DIR)/common/include/modules/ \ -+ -I$(OSAL_DIR)/common/include/modules/ddk/ \ -+ -I$(OSAL_DIR)/common/include/modules/bufferMgt/ \ -+ -I$(OSAL_DIR)/common/include/modules/ioMem/ \ -+ -I$(OSAL_DIR)/common/os/linux/include/ \ -+ -I$(OSAL_DIR)/common/os/linux/include/core/ \ -+ -I$(OSAL_DIR)/common/os/linux/include/modules/ \ -+ -I$(OSAL_DIR)/common/os/linux/include/modules/ddk/ \ -+ -I$(OSAL_DIR)/common/os/linux/include/modules/bufferMgt/ \ -+ -I$(OSAL_DIR)/common/os/linux/include/modules/ioMem/ \ -+ -I$(OSAL_DIR)/platforms/$(IXPLATFORM)/include/ \ -+ -I$(OSAL_DIR)/platforms/$(IXPLATFORM)/os/linux/include/ \ -+ -DENABLE_IOMEM -DENABLE_BUFFERMGT -DENABLE_DDK \ -+ -DUSE_IXP4XX_CRYPTO -+else -+IXP_CFLAGS = \ -+ -I$(ROOTDIR)/. \ -+ -I$(IX_XSCALE_SW)/src/include \ -+ -I$(OSAL_DIR)/ \ -+ -I$(OSAL_DIR)/os/linux/include/ \ -+ -I$(OSAL_DIR)/os/linux/include/modules/ \ -+ -I$(OSAL_DIR)/os/linux/include/modules/ioMem/ \ -+ -I$(OSAL_DIR)/os/linux/include/modules/bufferMgt/ \ -+ -I$(OSAL_DIR)/os/linux/include/core/ \ -+ -I$(OSAL_DIR)/os/linux/include/platforms/ \ -+ -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ \ -+ -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ixp425 \ -+ -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ixp465 \ -+ -I$(OSAL_DIR)/os/linux/include/core/ \ -+ -I$(OSAL_DIR)/include/ \ -+ -I$(OSAL_DIR)/include/modules/ \ -+ -I$(OSAL_DIR)/include/modules/bufferMgt/ \ -+ -I$(OSAL_DIR)/include/modules/ioMem/ \ -+ -I$(OSAL_DIR)/include/platforms/ \ -+ -I$(OSAL_DIR)/include/platforms/ixp400/ \ -+ -DUSE_IXP4XX_CRYPTO -+endif -+endif -+ifdef CONFIG_IXP400_LIB_1_4 -+IXP_CFLAGS = \ -+ -I$(ROOTDIR)/. \ -+ -I$(ROOTDIR)/modules/ixp425/ixp400-1.4/ixp400_xscale_sw/src/include \ -+ -I$(ROOTDIR)/modules/ixp425/ixp400-1.4/ixp400_xscale_sw/src/linux \ -+ -DUSE_IXP4XX_CRYPTO -+endif -+ifndef IXPDIR -+IXPDIR = ixp-version-is-not-supported -+endif -+ -+ifeq ($(CONFIG_CPU_IXP46X),y) -+IXP_CFLAGS += -D__ixp46X -+else -+ifeq ($(CONFIG_CPU_IXP43X),y) -+IXP_CFLAGS += -D__ixp43X -+else -+IXP_CFLAGS += -D__ixp42X -+endif -+endif -+ -+obj-$(CONFIG_OCF_IXP4XX) += ixp4xx.o -+ -+obj ?= . -+EXTRA_CFLAGS += $(IXP_CFLAGS) -I$(obj)/.. -I$(obj)/. -+ -+ifdef TOPDIR -+-include $(TOPDIR)/Rules.make -+endif -+ -diff -Nur linux-2.6.30.orig/crypto/ocf/Kconfig linux-2.6.30/crypto/ocf/Kconfig ---- linux-2.6.30.orig/crypto/ocf/Kconfig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/Kconfig 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,101 @@ -+menu "OCF Configuration" -+ -+config OCF_OCF -+ tristate "OCF (Open Cryptograhic Framework)" -+ help -+ A linux port of the OpenBSD/FreeBSD crypto framework. -+ -+config OCF_RANDOMHARVEST -+ bool "crypto random --- harvest entropy for /dev/random" -+ depends on OCF_OCF -+ help -+ Includes code to harvest random numbers from devices that support it. -+ -+config OCF_FIPS -+ bool "enable fips RNG checks" -+ depends on OCF_OCF && OCF_RANDOMHARVEST -+ help -+ Run all RNG provided data through a fips check before -+ adding it /dev/random's entropy pool. -+ -+config OCF_CRYPTODEV -+ tristate "cryptodev (user space support)" -+ depends on OCF_OCF -+ help -+ The user space API to access crypto hardware. -+ -+config OCF_CRYPTOSOFT -+ tristate "cryptosoft (software crypto engine)" -+ depends on OCF_OCF -+ help -+ A software driver for the OCF framework that uses -+ the kernel CryptoAPI. -+ -+config OCF_SAFE -+ tristate "safenet (HW crypto engine)" -+ depends on OCF_OCF -+ help -+ A driver for a number of the safenet Excel crypto accelerators. -+ Currently tested and working on the 1141 and 1741. -+ -+config OCF_IXP4XX -+ tristate "IXP4xx (HW crypto engine)" -+ depends on OCF_OCF -+ help -+ XScale IXP4xx crypto accelerator driver. Requires the -+ Intel Access library. -+ -+config OCF_IXP4XX_SHA1_MD5 -+ bool "IXP4xx SHA1 and MD5 Hashing" -+ depends on OCF_IXP4XX -+ help -+ Allows the IXP4xx crypto accelerator to perform SHA1 and MD5 hashing. -+ Note: this is MUCH slower than using cryptosoft (software crypto engine). -+ -+config OCF_HIFN -+ tristate "hifn (HW crypto engine)" -+ depends on OCF_OCF -+ help -+ OCF driver for various HIFN based crypto accelerators. -+ (7951, 7955, 7956, 7751, 7811) -+ -+config OCF_HIFNHIPP -+ tristate "Hifn HIPP (HW packet crypto engine)" -+ depends on OCF_OCF -+ help -+ OCF driver for various HIFN (HIPP) based crypto accelerators -+ (7855) -+ -+config OCF_TALITOS -+ tristate "talitos (HW crypto engine)" -+ depends on OCF_OCF -+ help -+ OCF driver for Freescale's security engine (SEC/talitos). -+ -+config OCF_PASEMI -+ tristate "pasemi (HW crypto engine)" -+ depends on OCF_OCF && PPC_PASEMI -+ help -+ OCF driver for the PA Semi PWRficient DMA Engine -+ -+config OCF_EP80579 -+ tristate "ep80579 (HW crypto engine)" -+ depends on OCF_OCF -+ help -+ OCF driver for the Intel EP80579 Integrated Processor Product Line. -+ -+config OCF_OCFNULL -+ tristate "ocfnull (fake crypto engine)" -+ depends on OCF_OCF -+ help -+ OCF driver for measuring ipsec overheads (does no crypto) -+ -+config OCF_BENCH -+ tristate "ocf-bench (HW crypto in-kernel benchmark)" -+ depends on OCF_OCF -+ help -+ A very simple encryption test for the in-kernel interface -+ of OCF. Also includes code to benchmark the IXP Access library -+ for comparison. -+ -+endmenu -diff -Nur linux-2.6.30.orig/crypto/ocf/Makefile linux-2.6.30/crypto/ocf/Makefile ---- linux-2.6.30.orig/crypto/ocf/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/Makefile 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,121 @@ -+# for SGlinux builds -+-include $(ROOTDIR)/modules/.config -+ -+OCF_OBJS = crypto.o criov.o -+ -+ifdef CONFIG_OCF_RANDOMHARVEST -+ OCF_OBJS += random.o -+endif -+ -+ifdef CONFIG_OCF_FIPS -+ OCF_OBJS += rndtest.o -+endif -+ -+# Add in autoconf.h to get #defines for CONFIG_xxx -+AUTOCONF_H=$(ROOTDIR)/modules/autoconf.h -+ifeq ($(AUTOCONF_H), $(wildcard $(AUTOCONF_H))) -+ EXTRA_CFLAGS += -include $(AUTOCONF_H) -+ export EXTRA_CFLAGS -+endif -+ -+ifndef obj -+ obj ?= . -+ _obj = subdir -+ mod-subdirs := safe hifn ixp4xx talitos ocfnull -+ export-objs += crypto.o criov.o random.o -+ list-multi += ocf.o -+ _slash := -+else -+ _obj = obj -+ _slash := / -+endif -+ -+EXTRA_CFLAGS += -I$(obj)/. -+ -+obj-$(CONFIG_OCF_OCF) += ocf.o -+obj-$(CONFIG_OCF_CRYPTODEV) += cryptodev.o -+obj-$(CONFIG_OCF_CRYPTOSOFT) += cryptosoft.o -+obj-$(CONFIG_OCF_BENCH) += ocf-bench.o -+ -+$(_obj)-$(CONFIG_OCF_SAFE) += safe$(_slash) -+$(_obj)-$(CONFIG_OCF_HIFN) += hifn$(_slash) -+$(_obj)-$(CONFIG_OCF_IXP4XX) += ixp4xx$(_slash) -+$(_obj)-$(CONFIG_OCF_TALITOS) += talitos$(_slash) -+$(_obj)-$(CONFIG_OCF_PASEMI) += pasemi$(_slash) -+$(_obj)-$(CONFIG_OCF_EP80579) += ep80579$(_slash) -+$(_obj)-$(CONFIG_OCF_OCFNULL) += ocfnull$(_slash) -+ -+ocf-objs := $(OCF_OBJS) -+ -+$(list-multi) dummy1: $(ocf-objs) -+ $(LD) -r -o $@ $(ocf-objs) -+ -+.PHONY: -+clean: -+ rm -f *.o *.ko .*.o.flags .*.ko.cmd .*.o.cmd .*.mod.o.cmd *.mod.c -+ rm -f */*.o */*.ko */.*.o.cmd */.*.ko.cmd */.*.mod.o.cmd */*.mod.c */.*.o.flags -+ -+ifdef TOPDIR -+-include $(TOPDIR)/Rules.make -+endif -+ -+# -+# release gen targets -+# -+ -+.PHONY: patch -+patch: -+ REL=`date +%Y%m%d`; \ -+ patch=ocf-linux-$$REL.patch; \ -+ patch24=ocf-linux-24-$$REL.patch; \ -+ patch26=ocf-linux-26-$$REL.patch; \ -+ ( \ -+ find . -name Makefile; \ -+ find . -name Config.in; \ -+ find . -name Kconfig; \ -+ find . -name README; \ -+ find . -name '*.[ch]' | grep -v '.mod.c'; \ -+ ) | while read t; do \ -+ diff -Nau /dev/null $$t | sed 's?^+++ \./?+++ linux/crypto/ocf/?'; \ -+ done > $$patch; \ -+ cat patches/linux-2.4.35-ocf.patch $$patch > $$patch24; \ -+ cat patches/linux-2.6.26-ocf.patch $$patch > $$patch26 -+ -+.PHONY: tarball -+tarball: -+ REL=`date +%Y%m%d`; RELDIR=/tmp/ocf-linux-$$REL; \ -+ CURDIR=`pwd`; \ -+ rm -rf /tmp/ocf-linux-$$REL*; \ -+ mkdir -p $$RELDIR/tools; \ -+ cp README* $$RELDIR; \ -+ cp patches/openss*.patch $$RELDIR; \ -+ cp patches/crypto-tools.patch $$RELDIR; \ -+ cp tools/[!C]* $$RELDIR/tools; \ -+ cd ..; \ -+ tar cvf $$RELDIR/ocf-linux.tar \ -+ --exclude=CVS \ -+ --exclude=.* \ -+ --exclude=*.o \ -+ --exclude=*.ko \ -+ --exclude=*.mod.* \ -+ --exclude=README* \ -+ --exclude=ocf-*.patch \ -+ --exclude=ocf/patches/openss*.patch \ -+ --exclude=ocf/patches/crypto-tools.patch \ -+ --exclude=ocf/tools \ -+ ocf; \ -+ gzip -9 $$RELDIR/ocf-linux.tar; \ -+ cd /tmp; \ -+ tar cvf ocf-linux-$$REL.tar ocf-linux-$$REL; \ -+ gzip -9 ocf-linux-$$REL.tar; \ -+ cd $$CURDIR/../../user; \ -+ rm -rf /tmp/crypto-tools-$$REL*; \ -+ tar cvf /tmp/crypto-tools-$$REL.tar \ -+ --exclude=CVS \ -+ --exclude=.* \ -+ --exclude=*.o \ -+ --exclude=cryptotest \ -+ --exclude=cryptokeytest \ -+ crypto-tools; \ -+ gzip -9 /tmp/crypto-tools-$$REL.tar -+ -diff -Nur linux-2.6.30.orig/crypto/ocf/ocf-bench.c linux-2.6.30/crypto/ocf/ocf-bench.c ---- linux-2.6.30.orig/crypto/ocf/ocf-bench.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/ocf-bench.c 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,436 @@ -+/* -+ * A loadable module that benchmarks the OCF crypto speed from kernel space. -+ * -+ * Copyright (C) 2004-2007 David McCullough <david_mccullough@securecomputing.com> -+ * -+ * LICENSE TERMS -+ * -+ * The free distribution and use of this software in both source and binary -+ * form is allowed (with or without changes) provided that: -+ * -+ * 1. distributions of this source code include the above copyright -+ * notice, this list of conditions and the following disclaimer; -+ * -+ * 2. distributions in binary form include the above copyright -+ * notice, this list of conditions and the following disclaimer -+ * in the documentation and/or other associated materials; -+ * -+ * 3. the copyright holder's name is not used to endorse products -+ * built using this software without specific written permission. -+ * -+ * ALTERNATIVELY, provided that this notice is retained in full, this product -+ * may be distributed under the terms of the GNU General Public License (GPL), -+ * in which case the provisions of the GPL apply INSTEAD OF those given above. -+ * -+ * DISCLAIMER -+ * -+ * This software is provided 'as is' with no explicit or implied warranties -+ * in respect of its properties, including, but not limited to, correctness -+ * and/or fitness for purpose. -+ */ -+ -+ -+#ifndef AUTOCONF_INCLUDED -+#include <linux/config.h> -+#endif -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/list.h> -+#include <linux/slab.h> -+#include <linux/wait.h> -+#include <linux/sched.h> -+#include <linux/spinlock.h> -+#include <linux/version.h> -+#include <linux/interrupt.h> -+#include <cryptodev.h> -+ -+#ifdef I_HAVE_AN_XSCALE_WITH_INTEL_SDK -+#define BENCH_IXP_ACCESS_LIB 1 -+#endif -+#ifdef BENCH_IXP_ACCESS_LIB -+#include <IxTypes.h> -+#include <IxOsBuffMgt.h> -+#include <IxNpeDl.h> -+#include <IxCryptoAcc.h> -+#include <IxQMgr.h> -+#include <IxOsServices.h> -+#include <IxOsCacheMMU.h> -+#endif -+ -+/* -+ * support for access lib version 1.4 -+ */ -+#ifndef IX_MBUF_PRIV -+#define IX_MBUF_PRIV(x) ((x)->priv) -+#endif -+ -+/* -+ * the number of simultaneously active requests -+ */ -+static int request_q_len = 20; -+module_param(request_q_len, int, 0); -+MODULE_PARM_DESC(request_q_len, "Number of outstanding requests"); -+/* -+ * how many requests we want to have processed -+ */ -+static int request_num = 1024; -+module_param(request_num, int, 0); -+MODULE_PARM_DESC(request_num, "run for at least this many requests"); -+/* -+ * the size of each request -+ */ -+static int request_size = 1500; -+module_param(request_size, int, 0); -+MODULE_PARM_DESC(request_size, "size of each request"); -+ -+/* -+ * a structure for each request -+ */ -+typedef struct { -+ struct work_struct work; -+#ifdef BENCH_IXP_ACCESS_LIB -+ IX_MBUF mbuf; -+#endif -+ unsigned char *buffer; -+} request_t; -+ -+static request_t *requests; -+ -+static int outstanding; -+static int total; -+ -+/*************************************************************************/ -+/* -+ * OCF benchmark routines -+ */ -+ -+static uint64_t ocf_cryptoid; -+static int ocf_init(void); -+static int ocf_cb(struct cryptop *crp); -+static void ocf_request(void *arg); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -+static void ocf_request_wq(struct work_struct *work); -+#endif -+ -+static int -+ocf_init(void) -+{ -+ int error; -+ struct cryptoini crie, cria; -+ struct cryptodesc crda, crde; -+ -+ memset(&crie, 0, sizeof(crie)); -+ memset(&cria, 0, sizeof(cria)); -+ memset(&crde, 0, sizeof(crde)); -+ memset(&crda, 0, sizeof(crda)); -+ -+ cria.cri_alg = CRYPTO_SHA1_HMAC; -+ cria.cri_klen = 20 * 8; -+ cria.cri_key = "0123456789abcdefghij"; -+ -+ crie.cri_alg = CRYPTO_3DES_CBC; -+ crie.cri_klen = 24 * 8; -+ crie.cri_key = "0123456789abcdefghijklmn"; -+ -+ crie.cri_next = &cria; -+ -+ error = crypto_newsession(&ocf_cryptoid, &crie, 0); -+ if (error) { -+ printk("crypto_newsession failed %d\n", error); -+ return -1; -+ } -+ return 0; -+} -+ -+static int -+ocf_cb(struct cryptop *crp) -+{ -+ request_t *r = (request_t *) crp->crp_opaque; -+ -+ if (crp->crp_etype) -+ printk("Error in OCF processing: %d\n", crp->crp_etype); -+ total++; -+ crypto_freereq(crp); -+ crp = NULL; -+ -+ if (total > request_num) { -+ outstanding--; -+ return 0; -+ } -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -+ INIT_WORK(&r->work, ocf_request_wq); -+#else -+ INIT_WORK(&r->work, ocf_request, r); -+#endif -+ schedule_work(&r->work); -+ return 0; -+} -+ -+ -+static void -+ocf_request(void *arg) -+{ -+ request_t *r = arg; -+ struct cryptop *crp = crypto_getreq(2); -+ struct cryptodesc *crde, *crda; -+ -+ if (!crp) { -+ outstanding--; -+ return; -+ } -+ -+ crde = crp->crp_desc; -+ crda = crde->crd_next; -+ -+ crda->crd_skip = 0; -+ crda->crd_flags = 0; -+ crda->crd_len = request_size; -+ crda->crd_inject = request_size; -+ crda->crd_alg = CRYPTO_SHA1_HMAC; -+ crda->crd_key = "0123456789abcdefghij"; -+ crda->crd_klen = 20 * 8; -+ -+ crde->crd_skip = 0; -+ crde->crd_flags = CRD_F_IV_EXPLICIT | CRD_F_ENCRYPT; -+ crde->crd_len = request_size; -+ crde->crd_inject = request_size; -+ crde->crd_alg = CRYPTO_3DES_CBC; -+ crde->crd_key = "0123456789abcdefghijklmn"; -+ crde->crd_klen = 24 * 8; -+ -+ crp->crp_ilen = request_size + 64; -+ crp->crp_flags = CRYPTO_F_CBIMM; -+ crp->crp_buf = (caddr_t) r->buffer; -+ crp->crp_callback = ocf_cb; -+ crp->crp_sid = ocf_cryptoid; -+ crp->crp_opaque = (caddr_t) r; -+ crypto_dispatch(crp); -+} -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -+static void -+ocf_request_wq(struct work_struct *work) -+{ -+ request_t *r = container_of(work, request_t, work); -+ ocf_request(r); -+} -+#endif -+ -+/*************************************************************************/ -+#ifdef BENCH_IXP_ACCESS_LIB -+/*************************************************************************/ -+/* -+ * CryptoAcc benchmark routines -+ */ -+ -+static IxCryptoAccCtx ixp_ctx; -+static UINT32 ixp_ctx_id; -+static IX_MBUF ixp_pri; -+static IX_MBUF ixp_sec; -+static int ixp_registered = 0; -+ -+static void ixp_register_cb(UINT32 ctx_id, IX_MBUF *bufp, -+ IxCryptoAccStatus status); -+static void ixp_perform_cb(UINT32 ctx_id, IX_MBUF *sbufp, IX_MBUF *dbufp, -+ IxCryptoAccStatus status); -+static void ixp_request(void *arg); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -+static void ixp_request_wq(struct work_struct *work); -+#endif -+ -+static int -+ixp_init(void) -+{ -+ IxCryptoAccStatus status; -+ -+ ixp_ctx.cipherCtx.cipherAlgo = IX_CRYPTO_ACC_CIPHER_3DES; -+ ixp_ctx.cipherCtx.cipherMode = IX_CRYPTO_ACC_MODE_CBC; -+ ixp_ctx.cipherCtx.cipherKeyLen = 24; -+ ixp_ctx.cipherCtx.cipherBlockLen = IX_CRYPTO_ACC_DES_BLOCK_64; -+ ixp_ctx.cipherCtx.cipherInitialVectorLen = IX_CRYPTO_ACC_DES_IV_64; -+ memcpy(ixp_ctx.cipherCtx.key.cipherKey, "0123456789abcdefghijklmn", 24); -+ -+ ixp_ctx.authCtx.authAlgo = IX_CRYPTO_ACC_AUTH_SHA1; -+ ixp_ctx.authCtx.authDigestLen = 12; -+ ixp_ctx.authCtx.aadLen = 0; -+ ixp_ctx.authCtx.authKeyLen = 20; -+ memcpy(ixp_ctx.authCtx.key.authKey, "0123456789abcdefghij", 20); -+ -+ ixp_ctx.useDifferentSrcAndDestMbufs = 0; -+ ixp_ctx.operation = IX_CRYPTO_ACC_OP_ENCRYPT_AUTH ; -+ -+ IX_MBUF_MLEN(&ixp_pri) = IX_MBUF_PKT_LEN(&ixp_pri) = 128; -+ IX_MBUF_MDATA(&ixp_pri) = (unsigned char *) kmalloc(128, SLAB_ATOMIC); -+ IX_MBUF_MLEN(&ixp_sec) = IX_MBUF_PKT_LEN(&ixp_sec) = 128; -+ IX_MBUF_MDATA(&ixp_sec) = (unsigned char *) kmalloc(128, SLAB_ATOMIC); -+ -+ status = ixCryptoAccCtxRegister(&ixp_ctx, &ixp_pri, &ixp_sec, -+ ixp_register_cb, ixp_perform_cb, &ixp_ctx_id); -+ -+ if (IX_CRYPTO_ACC_STATUS_SUCCESS == status) { -+ while (!ixp_registered) -+ schedule(); -+ return ixp_registered < 0 ? -1 : 0; -+ } -+ -+ printk("ixp: ixCryptoAccCtxRegister failed %d\n", status); -+ return -1; -+} -+ -+static void -+ixp_register_cb(UINT32 ctx_id, IX_MBUF *bufp, IxCryptoAccStatus status) -+{ -+ if (bufp) { -+ IX_MBUF_MLEN(bufp) = IX_MBUF_PKT_LEN(bufp) = 0; -+ kfree(IX_MBUF_MDATA(bufp)); -+ IX_MBUF_MDATA(bufp) = NULL; -+ } -+ -+ if (IX_CRYPTO_ACC_STATUS_WAIT == status) -+ return; -+ if (IX_CRYPTO_ACC_STATUS_SUCCESS == status) -+ ixp_registered = 1; -+ else -+ ixp_registered = -1; -+} -+ -+static void -+ixp_perform_cb( -+ UINT32 ctx_id, -+ IX_MBUF *sbufp, -+ IX_MBUF *dbufp, -+ IxCryptoAccStatus status) -+{ -+ request_t *r = NULL; -+ -+ total++; -+ if (total > request_num) { -+ outstanding--; -+ return; -+ } -+ -+ if (!sbufp || !(r = IX_MBUF_PRIV(sbufp))) { -+ printk("crappo %p %p\n", sbufp, r); -+ outstanding--; -+ return; -+ } -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -+ INIT_WORK(&r->work, ixp_request_wq); -+#else -+ INIT_WORK(&r->work, ixp_request, r); -+#endif -+ schedule_work(&r->work); -+} -+ -+static void -+ixp_request(void *arg) -+{ -+ request_t *r = arg; -+ IxCryptoAccStatus status; -+ -+ memset(&r->mbuf, 0, sizeof(r->mbuf)); -+ IX_MBUF_MLEN(&r->mbuf) = IX_MBUF_PKT_LEN(&r->mbuf) = request_size + 64; -+ IX_MBUF_MDATA(&r->mbuf) = r->buffer; -+ IX_MBUF_PRIV(&r->mbuf) = r; -+ status = ixCryptoAccAuthCryptPerform(ixp_ctx_id, &r->mbuf, NULL, -+ 0, request_size, 0, request_size, request_size, r->buffer); -+ if (IX_CRYPTO_ACC_STATUS_SUCCESS != status) { -+ printk("status1 = %d\n", status); -+ outstanding--; -+ return; -+ } -+ return; -+} -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -+static void -+ixp_request_wq(struct work_struct *work) -+{ -+ request_t *r = container_of(work, request_t, work); -+ ixp_request(r); -+} -+#endif -+ -+/*************************************************************************/ -+#endif /* BENCH_IXP_ACCESS_LIB */ -+/*************************************************************************/ -+ -+int -+ocfbench_init(void) -+{ -+ int i, jstart, jstop; -+ -+ printk("Crypto Speed tests\n"); -+ -+ requests = kmalloc(sizeof(request_t) * request_q_len, GFP_KERNEL); -+ if (!requests) { -+ printk("malloc failed\n"); -+ return -EINVAL; -+ } -+ -+ for (i = 0; i < request_q_len; i++) { -+ /* +64 for return data */ -+ requests[i].buffer = kmalloc(request_size + 128, GFP_DMA); -+ if (!requests[i].buffer) { -+ printk("malloc failed\n"); -+ return -EINVAL; -+ } -+ memset(requests[i].buffer, '0' + i, request_size + 128); -+ } -+ -+ /* -+ * OCF benchmark -+ */ -+ printk("OCF: testing ...\n"); -+ ocf_init(); -+ total = outstanding = 0; -+ jstart = jiffies; -+ for (i = 0; i < request_q_len; i++) { -+ outstanding++; -+ ocf_request(&requests[i]); -+ } -+ while (outstanding > 0) -+ schedule(); -+ jstop = jiffies; -+ -+ printk("OCF: %d requests of %d bytes in %d jiffies\n", total, request_size, -+ jstop - jstart); -+ -+#ifdef BENCH_IXP_ACCESS_LIB -+ /* -+ * IXP benchmark -+ */ -+ printk("IXP: testing ...\n"); -+ ixp_init(); -+ total = outstanding = 0; -+ jstart = jiffies; -+ for (i = 0; i < request_q_len; i++) { -+ outstanding++; -+ ixp_request(&requests[i]); -+ } -+ while (outstanding > 0) -+ schedule(); -+ jstop = jiffies; -+ -+ printk("IXP: %d requests of %d bytes in %d jiffies\n", total, request_size, -+ jstop - jstart); -+#endif /* BENCH_IXP_ACCESS_LIB */ -+ -+ for (i = 0; i < request_q_len; i++) -+ kfree(requests[i].buffer); -+ kfree(requests); -+ return -EINVAL; /* always fail to load so it can be re-run quickly ;-) */ -+} -+ -+static void __exit ocfbench_exit(void) -+{ -+} -+ -+module_init(ocfbench_init); -+module_exit(ocfbench_exit); -+ -+MODULE_LICENSE("BSD"); -+MODULE_AUTHOR("David McCullough <david_mccullough@securecomputing.com>"); -+MODULE_DESCRIPTION("Benchmark various in-kernel crypto speeds"); -diff -Nur linux-2.6.30.orig/crypto/ocf/ocf-compat.h linux-2.6.30/crypto/ocf/ocf-compat.h ---- linux-2.6.30.orig/crypto/ocf/ocf-compat.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/ocf-compat.h 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,270 @@ -+#ifndef _BSD_COMPAT_H_ -+#define _BSD_COMPAT_H_ 1 -+/****************************************************************************/ -+/* -+ * Provide compat routines for older linux kernels and BSD kernels -+ * -+ * Written by David McCullough <david_mccullough@securecomputing.com> -+ * Copyright (C) 2007 David McCullough <david_mccullough@securecomputing.com> -+ * -+ * LICENSE TERMS -+ * -+ * The free distribution and use of this software in both source and binary -+ * form is allowed (with or without changes) provided that: -+ * -+ * 1. distributions of this source code include the above copyright -+ * notice, this list of conditions and the following disclaimer; -+ * -+ * 2. distributions in binary form include the above copyright -+ * notice, this list of conditions and the following disclaimer -+ * in the documentation and/or other associated materials; -+ * -+ * 3. the copyright holder's name is not used to endorse products -+ * built using this software without specific written permission. -+ * -+ * ALTERNATIVELY, provided that this notice is retained in full, this file -+ * may be distributed under the terms of the GNU General Public License (GPL), -+ * in which case the provisions of the GPL apply INSTEAD OF those given above. -+ * -+ * DISCLAIMER -+ * -+ * This software is provided 'as is' with no explicit or implied warranties -+ * in respect of its properties, including, but not limited to, correctness -+ * and/or fitness for purpose. -+ */ -+/****************************************************************************/ -+#ifdef __KERNEL__ -+/* -+ * fake some BSD driver interface stuff specifically for OCF use -+ */ -+ -+typedef struct ocf_device *device_t; -+ -+typedef struct { -+ int (*cryptodev_newsession)(device_t dev, u_int32_t *sidp, struct cryptoini *cri); -+ int (*cryptodev_freesession)(device_t dev, u_int64_t tid); -+ int (*cryptodev_process)(device_t dev, struct cryptop *crp, int hint); -+ int (*cryptodev_kprocess)(device_t dev, struct cryptkop *krp, int hint); -+} device_method_t; -+#define DEVMETHOD(id, func) id: func -+ -+struct ocf_device { -+ char name[32]; /* the driver name */ -+ char nameunit[32]; /* the driver name + HW instance */ -+ int unit; -+ device_method_t methods; -+ void *softc; -+}; -+ -+#define CRYPTODEV_NEWSESSION(dev, sid, cri) \ -+ ((*(dev)->methods.cryptodev_newsession)(dev,sid,cri)) -+#define CRYPTODEV_FREESESSION(dev, sid) \ -+ ((*(dev)->methods.cryptodev_freesession)(dev, sid)) -+#define CRYPTODEV_PROCESS(dev, crp, hint) \ -+ ((*(dev)->methods.cryptodev_process)(dev, crp, hint)) -+#define CRYPTODEV_KPROCESS(dev, krp, hint) \ -+ ((*(dev)->methods.cryptodev_kprocess)(dev, krp, hint)) -+ -+#define device_get_name(dev) ((dev)->name) -+#define device_get_nameunit(dev) ((dev)->nameunit) -+#define device_get_unit(dev) ((dev)->unit) -+#define device_get_softc(dev) ((dev)->softc) -+ -+#define softc_device_decl \ -+ struct ocf_device _device; \ -+ device_t -+ -+#define softc_device_init(_sc, _name, _unit, _methods) \ -+ if (1) {\ -+ strncpy((_sc)->_device.name, _name, sizeof((_sc)->_device.name) - 1); \ -+ snprintf((_sc)->_device.nameunit, sizeof((_sc)->_device.name), "%s%d", _name, _unit); \ -+ (_sc)->_device.unit = _unit; \ -+ (_sc)->_device.methods = _methods; \ -+ (_sc)->_device.softc = (void *) _sc; \ -+ *(device_t *)((softc_get_device(_sc))+1) = &(_sc)->_device; \ -+ } else -+ -+#define softc_get_device(_sc) (&(_sc)->_device) -+ -+/* -+ * iomem support for 2.4 and 2.6 kernels -+ */ -+#include <linux/version.h> -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+#define ocf_iomem_t unsigned long -+ -+/* -+ * implement simple workqueue like support for older kernels -+ */ -+ -+#include <linux/tqueue.h> -+ -+#define work_struct tq_struct -+ -+#define INIT_WORK(wp, fp, ap) \ -+ do { \ -+ (wp)->sync = 0; \ -+ (wp)->routine = (fp); \ -+ (wp)->data = (ap); \ -+ } while (0) -+ -+#define schedule_work(wp) \ -+ do { \ -+ queue_task((wp), &tq_immediate); \ -+ mark_bh(IMMEDIATE_BH); \ -+ } while (0) -+ -+#define flush_scheduled_work() run_task_queue(&tq_immediate) -+ -+#else -+#define ocf_iomem_t void __iomem * -+ -+#include <linux/workqueue.h> -+ -+#endif -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26) -+#include <linux/fdtable.h> -+#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) -+#define files_fdtable(files) (files) -+#endif -+ -+#ifdef MODULE_PARM -+#undef module_param /* just in case */ -+#define module_param(a,b,c) MODULE_PARM(a,"i") -+#endif -+ -+#define bzero(s,l) memset(s,0,l) -+#define bcopy(s,d,l) memcpy(d,s,l) -+#define bcmp(x, y, l) memcmp(x,y,l) -+ -+#define MIN(x,y) ((x) < (y) ? (x) : (y)) -+ -+#define device_printf(dev, a...) ({ \ -+ printk("%s: ", device_get_nameunit(dev)); printk(a); \ -+ }) -+ -+#undef printf -+#define printf(fmt...) printk(fmt) -+ -+#define KASSERT(c,p) if (!(c)) { printk p ; } else -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+#define ocf_daemonize(str) \ -+ daemonize(); \ -+ spin_lock_irq(¤t->sigmask_lock); \ -+ sigemptyset(¤t->blocked); \ -+ recalc_sigpending(current); \ -+ spin_unlock_irq(¤t->sigmask_lock); \ -+ sprintf(current->comm, str); -+#else -+#define ocf_daemonize(str) daemonize(str); -+#endif -+ -+#define TAILQ_INSERT_TAIL(q,d,m) list_add_tail(&(d)->m, (q)) -+#define TAILQ_EMPTY(q) list_empty(q) -+#define TAILQ_FOREACH(v, q, m) list_for_each_entry(v, q, m) -+ -+#define read_random(p,l) get_random_bytes(p,l) -+ -+#define DELAY(x) ((x) > 2000 ? mdelay((x)/1000) : udelay(x)) -+#define strtoul simple_strtoul -+ -+#define pci_get_vendor(dev) ((dev)->vendor) -+#define pci_get_device(dev) ((dev)->device) -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+#define pci_set_consistent_dma_mask(dev, mask) (0) -+#endif -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) -+#define pci_dma_sync_single_for_cpu pci_dma_sync_single -+#endif -+ -+#ifndef DMA_32BIT_MASK -+#define DMA_32BIT_MASK 0x00000000ffffffffULL -+#endif -+ -+#define htole32(x) cpu_to_le32(x) -+#define htobe32(x) cpu_to_be32(x) -+#define htole16(x) cpu_to_le16(x) -+#define htobe16(x) cpu_to_be16(x) -+ -+/* older kernels don't have these */ -+ -+#ifndef IRQ_NONE -+#define IRQ_NONE -+#define IRQ_HANDLED -+#define irqreturn_t void -+#endif -+#ifndef IRQF_SHARED -+#define IRQF_SHARED SA_SHIRQ -+#endif -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -+# define strlcpy(dest,src,len) \ -+ ({strncpy(dest,src,(len)-1); ((char *)dest)[(len)-1] = '\0'; }) -+#endif -+ -+#ifndef MAX_ERRNO -+#define MAX_ERRNO 4095 -+#endif -+#ifndef IS_ERR_VALUE -+#define IS_ERR_VALUE(x) ((unsigned long)(x) >= (unsigned long)-MAX_ERRNO) -+#endif -+ -+/* -+ * common debug for all -+ */ -+#if 1 -+#define dprintk(a...) do { if (debug) printk(a); } while(0) -+#else -+#define dprintk(a...) -+#endif -+ -+#ifndef SLAB_ATOMIC -+/* Changed in 2.6.20, must use GFP_ATOMIC now */ -+#define SLAB_ATOMIC GFP_ATOMIC -+#endif -+ -+/* -+ * need some additional support for older kernels */ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,2) -+#define pci_register_driver_compat(driver, rc) \ -+ do { \ -+ if ((rc) > 0) { \ -+ (rc) = 0; \ -+ } else if (rc == 0) { \ -+ (rc) = -ENODEV; \ -+ } else { \ -+ pci_unregister_driver(driver); \ -+ } \ -+ } while (0) -+#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) -+#define pci_register_driver_compat(driver,rc) ((rc) = (rc) < 0 ? (rc) : 0) -+#else -+#define pci_register_driver_compat(driver,rc) -+#endif -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) -+ -+#include <asm/scatterlist.h> -+ -+static inline void sg_set_page(struct scatterlist *sg, struct page *page, -+ unsigned int len, unsigned int offset) -+{ -+ sg->page = page; -+ sg->offset = offset; -+ sg->length = len; -+} -+ -+static inline void *sg_virt(struct scatterlist *sg) -+{ -+ return page_address(sg->page) + sg->offset; -+} -+ -+#endif -+ -+#endif /* __KERNEL__ */ -+ -+/****************************************************************************/ -+#endif /* _BSD_COMPAT_H_ */ -diff -Nur linux-2.6.30.orig/crypto/ocf/ocfnull/Makefile linux-2.6.30/crypto/ocf/ocfnull/Makefile ---- linux-2.6.30.orig/crypto/ocf/ocfnull/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/ocfnull/Makefile 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,12 @@ -+# for SGlinux builds -+-include $(ROOTDIR)/modules/.config -+ -+obj-$(CONFIG_OCF_OCFNULL) += ocfnull.o -+ -+obj ?= . -+EXTRA_CFLAGS += -I$(obj)/.. -+ -+ifdef TOPDIR -+-include $(TOPDIR)/Rules.make -+endif -+ -diff -Nur linux-2.6.30.orig/crypto/ocf/ocfnull/ocfnull.c linux-2.6.30/crypto/ocf/ocfnull/ocfnull.c ---- linux-2.6.30.orig/crypto/ocf/ocfnull/ocfnull.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/ocfnull/ocfnull.c 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,203 @@ -+/* -+ * An OCF module for determining the cost of crypto versus the cost of -+ * IPSec processing outside of OCF. This modules gives us the effect of -+ * zero cost encryption, of course you will need to run it at both ends -+ * since it does no crypto at all. -+ * -+ * Written by David McCullough <david_mccullough@securecomputing.com> -+ * Copyright (C) 2006-2007 David McCullough -+ * -+ * LICENSE TERMS -+ * -+ * The free distribution and use of this software in both source and binary -+ * form is allowed (with or without changes) provided that: -+ * -+ * 1. distributions of this source code include the above copyright -+ * notice, this list of conditions and the following disclaimer; -+ * -+ * 2. distributions in binary form include the above copyright -+ * notice, this list of conditions and the following disclaimer -+ * in the documentation and/or other associated materials; -+ * -+ * 3. the copyright holder's name is not used to endorse products -+ * built using this software without specific written permission. -+ * -+ * ALTERNATIVELY, provided that this notice is retained in full, this product -+ * may be distributed under the terms of the GNU General Public License (GPL), -+ * in which case the provisions of the GPL apply INSTEAD OF those given above. -+ * -+ * DISCLAIMER -+ * -+ * This software is provided 'as is' with no explicit or implied warranties -+ * in respect of its properties, including, but not limited to, correctness -+ * and/or fitness for purpose. -+ */ -+ -+#ifndef AUTOCONF_INCLUDED -+#include <linux/config.h> -+#endif -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/list.h> -+#include <linux/slab.h> -+#include <linux/sched.h> -+#include <linux/wait.h> -+#include <linux/crypto.h> -+#include <linux/interrupt.h> -+ -+#include <cryptodev.h> -+#include <uio.h> -+ -+static int32_t null_id = -1; -+static u_int32_t null_sesnum = 0; -+ -+static int null_process(device_t, struct cryptop *, int); -+static int null_newsession(device_t, u_int32_t *, struct cryptoini *); -+static int null_freesession(device_t, u_int64_t); -+ -+#define debug ocfnull_debug -+int ocfnull_debug = 0; -+module_param(ocfnull_debug, int, 0644); -+MODULE_PARM_DESC(ocfnull_debug, "Enable debug"); -+ -+/* -+ * dummy device structure -+ */ -+ -+static struct { -+ softc_device_decl sc_dev; -+} nulldev; -+ -+static device_method_t null_methods = { -+ /* crypto device methods */ -+ DEVMETHOD(cryptodev_newsession, null_newsession), -+ DEVMETHOD(cryptodev_freesession,null_freesession), -+ DEVMETHOD(cryptodev_process, null_process), -+}; -+ -+/* -+ * Generate a new software session. -+ */ -+static int -+null_newsession(device_t arg, u_int32_t *sid, struct cryptoini *cri) -+{ -+ dprintk("%s()\n", __FUNCTION__); -+ if (sid == NULL || cri == NULL) { -+ dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__); -+ return EINVAL; -+ } -+ -+ if (null_sesnum == 0) -+ null_sesnum++; -+ *sid = null_sesnum++; -+ return 0; -+} -+ -+ -+/* -+ * Free a session. -+ */ -+static int -+null_freesession(device_t arg, u_int64_t tid) -+{ -+ u_int32_t sid = CRYPTO_SESID2LID(tid); -+ -+ dprintk("%s()\n", __FUNCTION__); -+ if (sid > null_sesnum) { -+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); -+ return EINVAL; -+ } -+ -+ /* Silently accept and return */ -+ if (sid == 0) -+ return 0; -+ return 0; -+} -+ -+ -+/* -+ * Process a request. -+ */ -+static int -+null_process(device_t arg, struct cryptop *crp, int hint) -+{ -+ unsigned int lid; -+ -+ dprintk("%s()\n", __FUNCTION__); -+ -+ /* Sanity check */ -+ if (crp == NULL) { -+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); -+ return EINVAL; -+ } -+ -+ crp->crp_etype = 0; -+ -+ if (crp->crp_desc == NULL || crp->crp_buf == NULL) { -+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); -+ crp->crp_etype = EINVAL; -+ goto done; -+ } -+ -+ /* -+ * find the session we are using -+ */ -+ -+ lid = crp->crp_sid & 0xffffffff; -+ if (lid >= null_sesnum || lid == 0) { -+ crp->crp_etype = ENOENT; -+ dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__); -+ goto done; -+ } -+ -+done: -+ crypto_done(crp); -+ return 0; -+} -+ -+ -+/* -+ * our driver startup and shutdown routines -+ */ -+ -+static int -+null_init(void) -+{ -+ dprintk("%s(%p)\n", __FUNCTION__, null_init); -+ -+ memset(&nulldev, 0, sizeof(nulldev)); -+ softc_device_init(&nulldev, "ocfnull", 0, null_methods); -+ -+ null_id = crypto_get_driverid(softc_get_device(&nulldev), -+ CRYPTOCAP_F_HARDWARE); -+ if (null_id < 0) -+ panic("ocfnull: crypto device cannot initialize!"); -+ -+#define REGISTER(alg) \ -+ crypto_register(null_id,alg,0,0) -+ REGISTER(CRYPTO_DES_CBC); -+ REGISTER(CRYPTO_3DES_CBC); -+ REGISTER(CRYPTO_RIJNDAEL128_CBC); -+ REGISTER(CRYPTO_MD5); -+ REGISTER(CRYPTO_SHA1); -+ REGISTER(CRYPTO_MD5_HMAC); -+ REGISTER(CRYPTO_SHA1_HMAC); -+#undef REGISTER -+ -+ return 0; -+} -+ -+static void -+null_exit(void) -+{ -+ dprintk("%s()\n", __FUNCTION__); -+ crypto_unregister_all(null_id); -+ null_id = -1; -+} -+ -+module_init(null_init); -+module_exit(null_exit); -+ -+MODULE_LICENSE("Dual BSD/GPL"); -+MODULE_AUTHOR("David McCullough <david_mccullough@securecomputing.com>"); -+MODULE_DESCRIPTION("ocfnull - claims a lot but does nothing"); -diff -Nur linux-2.6.30.orig/crypto/ocf/pasemi/Makefile linux-2.6.30/crypto/ocf/pasemi/Makefile ---- linux-2.6.30.orig/crypto/ocf/pasemi/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/pasemi/Makefile 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,12 @@ -+# for SGlinux builds -+-include $(ROOTDIR)/modules/.config -+ -+obj-$(CONFIG_OCF_PASEMI) += pasemi.o -+ -+obj ?= . -+EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/ -+ -+ifdef TOPDIR -+-include $(TOPDIR)/Rules.make -+endif -+ -diff -Nur linux-2.6.30.orig/crypto/ocf/pasemi/pasemi.c linux-2.6.30/crypto/ocf/pasemi/pasemi.c ---- linux-2.6.30.orig/crypto/ocf/pasemi/pasemi.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/pasemi/pasemi.c 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,1009 @@ -+/* -+ * Copyright (C) 2007 PA Semi, Inc -+ * -+ * Driver for the PA Semi PWRficient DMA Crypto Engine -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef AUTOCONF_INCLUDED -+#include <linux/config.h> -+#endif -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/interrupt.h> -+#include <linux/timer.h> -+#include <linux/random.h> -+#include <linux/skbuff.h> -+#include <asm/scatterlist.h> -+#include <linux/moduleparam.h> -+#include <linux/pci.h> -+#include <cryptodev.h> -+#include <uio.h> -+#include "pasemi_fnu.h" -+ -+#define DRV_NAME "pasemi" -+ -+#define TIMER_INTERVAL 1000 -+ -+static void __devexit pasemi_dma_remove(struct pci_dev *pdev); -+static struct pasdma_status volatile * dma_status; -+ -+static int debug; -+module_param(debug, int, 0644); -+MODULE_PARM_DESC(debug, "Enable debug"); -+ -+static void pasemi_desc_start(struct pasemi_desc *desc, u64 hdr) -+{ -+ desc->postop = 0; -+ desc->quad[0] = hdr; -+ desc->quad_cnt = 1; -+ desc->size = 1; -+} -+ -+static void pasemi_desc_build(struct pasemi_desc *desc, u64 val) -+{ -+ desc->quad[desc->quad_cnt++] = val; -+ desc->size = (desc->quad_cnt + 1) / 2; -+} -+ -+static void pasemi_desc_hdr(struct pasemi_desc *desc, u64 hdr) -+{ -+ desc->quad[0] |= hdr; -+} -+ -+static int pasemi_desc_size(struct pasemi_desc *desc) -+{ -+ return desc->size; -+} -+ -+static void pasemi_ring_add_desc( -+ struct pasemi_fnu_txring *ring, -+ struct pasemi_desc *desc, -+ struct cryptop *crp) { -+ int i; -+ int ring_index = 2 * (ring->next_to_fill & (TX_RING_SIZE-1)); -+ -+ TX_DESC_INFO(ring, ring->next_to_fill).desc_size = desc->size; -+ TX_DESC_INFO(ring, ring->next_to_fill).desc_postop = desc->postop; -+ TX_DESC_INFO(ring, ring->next_to_fill).cf_crp = crp; -+ -+ for (i = 0; i < desc->quad_cnt; i += 2) { -+ ring_index = 2 * (ring->next_to_fill & (TX_RING_SIZE-1)); -+ ring->desc[ring_index] = desc->quad[i]; -+ ring->desc[ring_index + 1] = desc->quad[i + 1]; -+ ring->next_to_fill++; -+ } -+ -+ if (desc->quad_cnt & 1) -+ ring->desc[ring_index + 1] = 0; -+} -+ -+static void pasemi_ring_incr(struct pasemi_softc *sc, int chan_index, int incr) -+{ -+ out_le32(sc->dma_regs + PAS_DMA_TXCHAN_INCR(sc->base_chan + chan_index), -+ incr); -+} -+ -+/* -+ * Generate a new software session. -+ */ -+static int -+pasemi_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri) -+{ -+ struct cryptoini *c, *encini = NULL, *macini = NULL; -+ struct pasemi_softc *sc = device_get_softc(dev); -+ struct pasemi_session *ses = NULL, **sespp; -+ int sesn, blksz = 0; -+ u64 ccmd = 0; -+ unsigned long flags; -+ struct pasemi_desc init_desc; -+ struct pasemi_fnu_txring *txring; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ if (sidp == NULL || cri == NULL || sc == NULL) { -+ DPRINTF("%s,%d - EINVAL\n", __FILE__, __LINE__); -+ return -EINVAL; -+ } -+ for (c = cri; c != NULL; c = c->cri_next) { -+ if (ALG_IS_SIG(c->cri_alg)) { -+ if (macini) -+ return -EINVAL; -+ macini = c; -+ } else if (ALG_IS_CIPHER(c->cri_alg)) { -+ if (encini) -+ return -EINVAL; -+ encini = c; -+ } else { -+ DPRINTF("UNKNOWN c->cri_alg %d\n", c->cri_alg); -+ return -EINVAL; -+ } -+ } -+ if (encini == NULL && macini == NULL) -+ return -EINVAL; -+ if (encini) { -+ /* validate key length */ -+ switch (encini->cri_alg) { -+ case CRYPTO_DES_CBC: -+ if (encini->cri_klen != 64) -+ return -EINVAL; -+ ccmd = DMA_CALGO_DES; -+ break; -+ case CRYPTO_3DES_CBC: -+ if (encini->cri_klen != 192) -+ return -EINVAL; -+ ccmd = DMA_CALGO_3DES; -+ break; -+ case CRYPTO_AES_CBC: -+ if (encini->cri_klen != 128 && -+ encini->cri_klen != 192 && -+ encini->cri_klen != 256) -+ return -EINVAL; -+ ccmd = DMA_CALGO_AES; -+ break; -+ case CRYPTO_ARC4: -+ if (encini->cri_klen != 128) -+ return -EINVAL; -+ ccmd = DMA_CALGO_ARC; -+ break; -+ default: -+ DPRINTF("UNKNOWN encini->cri_alg %d\n", -+ encini->cri_alg); -+ return -EINVAL; -+ } -+ } -+ -+ if (macini) { -+ switch (macini->cri_alg) { -+ case CRYPTO_MD5: -+ case CRYPTO_MD5_HMAC: -+ blksz = 16; -+ break; -+ case CRYPTO_SHA1: -+ case CRYPTO_SHA1_HMAC: -+ blksz = 20; -+ break; -+ default: -+ DPRINTF("UNKNOWN macini->cri_alg %d\n", -+ macini->cri_alg); -+ return -EINVAL; -+ } -+ if (((macini->cri_klen + 7) / 8) > blksz) { -+ DPRINTF("key length %d bigger than blksize %d not supported\n", -+ ((macini->cri_klen + 7) / 8), blksz); -+ return -EINVAL; -+ } -+ } -+ -+ for (sesn = 0; sesn < sc->sc_nsessions; sesn++) { -+ if (sc->sc_sessions[sesn] == NULL) { -+ sc->sc_sessions[sesn] = (struct pasemi_session *) -+ kzalloc(sizeof(struct pasemi_session), GFP_ATOMIC); -+ ses = sc->sc_sessions[sesn]; -+ break; -+ } else if (sc->sc_sessions[sesn]->used == 0) { -+ ses = sc->sc_sessions[sesn]; -+ break; -+ } -+ } -+ -+ if (ses == NULL) { -+ sespp = (struct pasemi_session **) -+ kzalloc(sc->sc_nsessions * 2 * -+ sizeof(struct pasemi_session *), GFP_ATOMIC); -+ if (sespp == NULL) -+ return -ENOMEM; -+ memcpy(sespp, sc->sc_sessions, -+ sc->sc_nsessions * sizeof(struct pasemi_session *)); -+ kfree(sc->sc_sessions); -+ sc->sc_sessions = sespp; -+ sesn = sc->sc_nsessions; -+ ses = sc->sc_sessions[sesn] = (struct pasemi_session *) -+ kzalloc(sizeof(struct pasemi_session), GFP_ATOMIC); -+ if (ses == NULL) -+ return -ENOMEM; -+ sc->sc_nsessions *= 2; -+ } -+ -+ ses->used = 1; -+ -+ ses->dma_addr = pci_map_single(sc->dma_pdev, (void *) ses->civ, -+ sizeof(struct pasemi_session), DMA_TO_DEVICE); -+ -+ /* enter the channel scheduler */ -+ spin_lock_irqsave(&sc->sc_chnlock, flags); -+ -+ /* ARC4 has to be processed by the even channel */ -+ if (encini && (encini->cri_alg == CRYPTO_ARC4)) -+ ses->chan = sc->sc_lastchn & ~1; -+ else -+ ses->chan = sc->sc_lastchn; -+ sc->sc_lastchn = (sc->sc_lastchn + 1) % sc->sc_num_channels; -+ -+ spin_unlock_irqrestore(&sc->sc_chnlock, flags); -+ -+ txring = &sc->tx[ses->chan]; -+ -+ if (encini) { -+ ses->ccmd = ccmd; -+ -+ /* get an IV */ -+ /* XXX may read fewer than requested */ -+ get_random_bytes(ses->civ, sizeof(ses->civ)); -+ -+ ses->keysz = (encini->cri_klen - 63) / 64; -+ memcpy(ses->key, encini->cri_key, (ses->keysz + 1) * 8); -+ -+ pasemi_desc_start(&init_desc, -+ XCT_CTRL_HDR(ses->chan, (encini && macini) ? 0x68 : 0x40, DMA_FN_CIV0)); -+ pasemi_desc_build(&init_desc, -+ XCT_FUN_SRC_PTR((encini && macini) ? 0x68 : 0x40, ses->dma_addr)); -+ } -+ if (macini) { -+ if (macini->cri_alg == CRYPTO_MD5_HMAC || -+ macini->cri_alg == CRYPTO_SHA1_HMAC) -+ memcpy(ses->hkey, macini->cri_key, blksz); -+ else { -+ /* Load initialization constants(RFC 1321, 3174) */ -+ ses->hiv[0] = 0x67452301efcdab89ULL; -+ ses->hiv[1] = 0x98badcfe10325476ULL; -+ ses->hiv[2] = 0xc3d2e1f000000000ULL; -+ } -+ ses->hseq = 0ULL; -+ } -+ -+ spin_lock_irqsave(&txring->fill_lock, flags); -+ -+ if (((txring->next_to_fill + pasemi_desc_size(&init_desc)) - -+ txring->next_to_clean) > TX_RING_SIZE) { -+ spin_unlock_irqrestore(&txring->fill_lock, flags); -+ return ERESTART; -+ } -+ -+ if (encini) { -+ pasemi_ring_add_desc(txring, &init_desc, NULL); -+ pasemi_ring_incr(sc, ses->chan, -+ pasemi_desc_size(&init_desc)); -+ } -+ -+ txring->sesn = sesn; -+ spin_unlock_irqrestore(&txring->fill_lock, flags); -+ -+ *sidp = PASEMI_SID(sesn); -+ return 0; -+} -+ -+/* -+ * Deallocate a session. -+ */ -+static int -+pasemi_freesession(device_t dev, u_int64_t tid) -+{ -+ struct pasemi_softc *sc = device_get_softc(dev); -+ int session; -+ u_int32_t sid = ((u_int32_t) tid) & 0xffffffff; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ if (sc == NULL) -+ return -EINVAL; -+ session = PASEMI_SESSION(sid); -+ if (session >= sc->sc_nsessions || !sc->sc_sessions[session]) -+ return -EINVAL; -+ -+ pci_unmap_single(sc->dma_pdev, -+ sc->sc_sessions[session]->dma_addr, -+ sizeof(struct pasemi_session), DMA_TO_DEVICE); -+ memset(sc->sc_sessions[session], 0, -+ sizeof(struct pasemi_session)); -+ -+ return 0; -+} -+ -+static int -+pasemi_process(device_t dev, struct cryptop *crp, int hint) -+{ -+ -+ int err = 0, ivsize, srclen = 0, reinit = 0, reinit_size = 0, chsel; -+ struct pasemi_softc *sc = device_get_softc(dev); -+ struct cryptodesc *crd1, *crd2, *maccrd, *enccrd; -+ caddr_t ivp; -+ struct pasemi_desc init_desc, work_desc; -+ struct pasemi_session *ses; -+ struct sk_buff *skb; -+ struct uio *uiop; -+ unsigned long flags; -+ struct pasemi_fnu_txring *txring; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ if (crp == NULL || crp->crp_callback == NULL || sc == NULL) -+ return -EINVAL; -+ -+ crp->crp_etype = 0; -+ if (PASEMI_SESSION(crp->crp_sid) >= sc->sc_nsessions) -+ return -EINVAL; -+ -+ ses = sc->sc_sessions[PASEMI_SESSION(crp->crp_sid)]; -+ -+ crd1 = crp->crp_desc; -+ if (crd1 == NULL) { -+ err = -EINVAL; -+ goto errout; -+ } -+ crd2 = crd1->crd_next; -+ -+ if (ALG_IS_SIG(crd1->crd_alg)) { -+ maccrd = crd1; -+ if (crd2 == NULL) -+ enccrd = NULL; -+ else if (ALG_IS_CIPHER(crd2->crd_alg) && -+ (crd2->crd_flags & CRD_F_ENCRYPT) == 0) -+ enccrd = crd2; -+ else -+ goto erralg; -+ } else if (ALG_IS_CIPHER(crd1->crd_alg)) { -+ enccrd = crd1; -+ if (crd2 == NULL) -+ maccrd = NULL; -+ else if (ALG_IS_SIG(crd2->crd_alg) && -+ (crd1->crd_flags & CRD_F_ENCRYPT)) -+ maccrd = crd2; -+ else -+ goto erralg; -+ } else -+ goto erralg; -+ -+ chsel = ses->chan; -+ -+ txring = &sc->tx[chsel]; -+ -+ if (enccrd && !maccrd) { -+ if (enccrd->crd_alg == CRYPTO_ARC4) -+ reinit = 1; -+ reinit_size = 0x40; -+ srclen = crp->crp_ilen; -+ -+ pasemi_desc_start(&work_desc, XCT_FUN_O | XCT_FUN_I -+ | XCT_FUN_FUN(chsel)); -+ if (enccrd->crd_flags & CRD_F_ENCRYPT) -+ pasemi_desc_hdr(&work_desc, XCT_FUN_CRM_ENC); -+ else -+ pasemi_desc_hdr(&work_desc, XCT_FUN_CRM_DEC); -+ } else if (enccrd && maccrd) { -+ if (enccrd->crd_alg == CRYPTO_ARC4) -+ reinit = 1; -+ reinit_size = 0x68; -+ -+ if (enccrd->crd_flags & CRD_F_ENCRYPT) { -+ /* Encrypt -> Authenticate */ -+ pasemi_desc_start(&work_desc, XCT_FUN_O | XCT_FUN_I | XCT_FUN_CRM_ENC_SIG -+ | XCT_FUN_A | XCT_FUN_FUN(chsel)); -+ srclen = maccrd->crd_skip + maccrd->crd_len; -+ } else { -+ /* Authenticate -> Decrypt */ -+ pasemi_desc_start(&work_desc, XCT_FUN_O | XCT_FUN_I | XCT_FUN_CRM_SIG_DEC -+ | XCT_FUN_24BRES | XCT_FUN_FUN(chsel)); -+ pasemi_desc_build(&work_desc, 0); -+ pasemi_desc_build(&work_desc, 0); -+ pasemi_desc_build(&work_desc, 0); -+ work_desc.postop = PASEMI_CHECK_SIG; -+ srclen = crp->crp_ilen; -+ } -+ -+ pasemi_desc_hdr(&work_desc, XCT_FUN_SHL(maccrd->crd_skip / 4)); -+ pasemi_desc_hdr(&work_desc, XCT_FUN_CHL(enccrd->crd_skip - maccrd->crd_skip)); -+ } else if (!enccrd && maccrd) { -+ srclen = maccrd->crd_len; -+ -+ pasemi_desc_start(&init_desc, -+ XCT_CTRL_HDR(chsel, 0x58, DMA_FN_HKEY0)); -+ pasemi_desc_build(&init_desc, -+ XCT_FUN_SRC_PTR(0x58, ((struct pasemi_session *)ses->dma_addr)->hkey)); -+ -+ pasemi_desc_start(&work_desc, XCT_FUN_O | XCT_FUN_I | XCT_FUN_CRM_SIG -+ | XCT_FUN_A | XCT_FUN_FUN(chsel)); -+ } -+ -+ if (enccrd) { -+ switch (enccrd->crd_alg) { -+ case CRYPTO_3DES_CBC: -+ pasemi_desc_hdr(&work_desc, XCT_FUN_ALG_3DES | -+ XCT_FUN_BCM_CBC); -+ ivsize = sizeof(u64); -+ break; -+ case CRYPTO_DES_CBC: -+ pasemi_desc_hdr(&work_desc, XCT_FUN_ALG_DES | -+ XCT_FUN_BCM_CBC); -+ ivsize = sizeof(u64); -+ break; -+ case CRYPTO_AES_CBC: -+ pasemi_desc_hdr(&work_desc, XCT_FUN_ALG_AES | -+ XCT_FUN_BCM_CBC); -+ ivsize = 2 * sizeof(u64); -+ break; -+ case CRYPTO_ARC4: -+ pasemi_desc_hdr(&work_desc, XCT_FUN_ALG_ARC); -+ ivsize = 0; -+ break; -+ default: -+ printk(DRV_NAME ": unimplemented enccrd->crd_alg %d\n", -+ enccrd->crd_alg); -+ err = -EINVAL; -+ goto errout; -+ } -+ -+ ivp = (ivsize == sizeof(u64)) ? (caddr_t) &ses->civ[1] : (caddr_t) &ses->civ[0]; -+ if (enccrd->crd_flags & CRD_F_ENCRYPT) { -+ if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) -+ memcpy(ivp, enccrd->crd_iv, ivsize); -+ /* If IV is not present in the buffer already, it has to be copied there */ -+ if ((enccrd->crd_flags & CRD_F_IV_PRESENT) == 0) -+ crypto_copyback(crp->crp_flags, crp->crp_buf, -+ enccrd->crd_inject, ivsize, ivp); -+ } else { -+ if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) -+ /* IV is provided expicitly in descriptor */ -+ memcpy(ivp, enccrd->crd_iv, ivsize); -+ else -+ /* IV is provided in the packet */ -+ crypto_copydata(crp->crp_flags, crp->crp_buf, -+ enccrd->crd_inject, ivsize, -+ ivp); -+ } -+ } -+ -+ if (maccrd) { -+ switch (maccrd->crd_alg) { -+ case CRYPTO_MD5: -+ pasemi_desc_hdr(&work_desc, XCT_FUN_SIG_MD5 | -+ XCT_FUN_HSZ((crp->crp_ilen - maccrd->crd_inject) / 4)); -+ break; -+ case CRYPTO_SHA1: -+ pasemi_desc_hdr(&work_desc, XCT_FUN_SIG_SHA1 | -+ XCT_FUN_HSZ((crp->crp_ilen - maccrd->crd_inject) / 4)); -+ break; -+ case CRYPTO_MD5_HMAC: -+ pasemi_desc_hdr(&work_desc, XCT_FUN_SIG_HMAC_MD5 | -+ XCT_FUN_HSZ((crp->crp_ilen - maccrd->crd_inject) / 4)); -+ break; -+ case CRYPTO_SHA1_HMAC: -+ pasemi_desc_hdr(&work_desc, XCT_FUN_SIG_HMAC_SHA1 | -+ XCT_FUN_HSZ((crp->crp_ilen - maccrd->crd_inject) / 4)); -+ break; -+ default: -+ printk(DRV_NAME ": unimplemented maccrd->crd_alg %d\n", -+ maccrd->crd_alg); -+ err = -EINVAL; -+ goto errout; -+ } -+ } -+ -+ if (crp->crp_flags & CRYPTO_F_SKBUF) { -+ /* using SKB buffers */ -+ skb = (struct sk_buff *)crp->crp_buf; -+ if (skb_shinfo(skb)->nr_frags) { -+ printk(DRV_NAME ": skb frags unimplemented\n"); -+ err = -EINVAL; -+ goto errout; -+ } -+ pasemi_desc_build( -+ &work_desc, -+ XCT_FUN_DST_PTR(skb->len, pci_map_single( -+ sc->dma_pdev, skb->data, -+ skb->len, DMA_TO_DEVICE))); -+ pasemi_desc_build( -+ &work_desc, -+ XCT_FUN_SRC_PTR( -+ srclen, pci_map_single( -+ sc->dma_pdev, skb->data, -+ srclen, DMA_TO_DEVICE))); -+ pasemi_desc_hdr(&work_desc, XCT_FUN_LLEN(srclen)); -+ } else if (crp->crp_flags & CRYPTO_F_IOV) { -+ /* using IOV buffers */ -+ uiop = (struct uio *)crp->crp_buf; -+ if (uiop->uio_iovcnt > 1) { -+ printk(DRV_NAME ": iov frags unimplemented\n"); -+ err = -EINVAL; -+ goto errout; -+ } -+ -+ /* crp_olen is never set; always use crp_ilen */ -+ pasemi_desc_build( -+ &work_desc, -+ XCT_FUN_DST_PTR(crp->crp_ilen, pci_map_single( -+ sc->dma_pdev, -+ uiop->uio_iov->iov_base, -+ crp->crp_ilen, DMA_TO_DEVICE))); -+ pasemi_desc_hdr(&work_desc, XCT_FUN_LLEN(srclen)); -+ -+ pasemi_desc_build( -+ &work_desc, -+ XCT_FUN_SRC_PTR(srclen, pci_map_single( -+ sc->dma_pdev, -+ uiop->uio_iov->iov_base, -+ srclen, DMA_TO_DEVICE))); -+ } else { -+ /* using contig buffers */ -+ pasemi_desc_build( -+ &work_desc, -+ XCT_FUN_DST_PTR(crp->crp_ilen, pci_map_single( -+ sc->dma_pdev, -+ crp->crp_buf, -+ crp->crp_ilen, DMA_TO_DEVICE))); -+ pasemi_desc_build( -+ &work_desc, -+ XCT_FUN_SRC_PTR(srclen, pci_map_single( -+ sc->dma_pdev, -+ crp->crp_buf, srclen, -+ DMA_TO_DEVICE))); -+ pasemi_desc_hdr(&work_desc, XCT_FUN_LLEN(srclen)); -+ } -+ -+ spin_lock_irqsave(&txring->fill_lock, flags); -+ -+ if (txring->sesn != PASEMI_SESSION(crp->crp_sid)) { -+ txring->sesn = PASEMI_SESSION(crp->crp_sid); -+ reinit = 1; -+ } -+ -+ if (enccrd) { -+ pasemi_desc_start(&init_desc, -+ XCT_CTRL_HDR(chsel, reinit ? reinit_size : 0x10, DMA_FN_CIV0)); -+ pasemi_desc_build(&init_desc, -+ XCT_FUN_SRC_PTR(reinit ? reinit_size : 0x10, ses->dma_addr)); -+ } -+ -+ if (((txring->next_to_fill + pasemi_desc_size(&init_desc) + -+ pasemi_desc_size(&work_desc)) - -+ txring->next_to_clean) > TX_RING_SIZE) { -+ spin_unlock_irqrestore(&txring->fill_lock, flags); -+ err = ERESTART; -+ goto errout; -+ } -+ -+ pasemi_ring_add_desc(txring, &init_desc, NULL); -+ pasemi_ring_add_desc(txring, &work_desc, crp); -+ -+ pasemi_ring_incr(sc, chsel, -+ pasemi_desc_size(&init_desc) + -+ pasemi_desc_size(&work_desc)); -+ -+ spin_unlock_irqrestore(&txring->fill_lock, flags); -+ -+ mod_timer(&txring->crypto_timer, jiffies + TIMER_INTERVAL); -+ -+ return 0; -+ -+erralg: -+ printk(DRV_NAME ": unsupported algorithm or algorithm order alg1 %d alg2 %d\n", -+ crd1->crd_alg, crd2->crd_alg); -+ err = -EINVAL; -+ -+errout: -+ if (err != ERESTART) { -+ crp->crp_etype = err; -+ crypto_done(crp); -+ } -+ return err; -+} -+ -+static int pasemi_clean_tx(struct pasemi_softc *sc, int chan) -+{ -+ int i, j, ring_idx; -+ struct pasemi_fnu_txring *ring = &sc->tx[chan]; -+ u16 delta_cnt; -+ int flags, loops = 10; -+ int desc_size; -+ struct cryptop *crp; -+ -+ spin_lock_irqsave(&ring->clean_lock, flags); -+ -+ while ((delta_cnt = (dma_status->tx_sta[sc->base_chan + chan] -+ & PAS_STATUS_PCNT_M) - ring->total_pktcnt) -+ && loops--) { -+ -+ for (i = 0; i < delta_cnt; i++) { -+ desc_size = TX_DESC_INFO(ring, ring->next_to_clean).desc_size; -+ crp = TX_DESC_INFO(ring, ring->next_to_clean).cf_crp; -+ if (crp) { -+ ring_idx = 2 * (ring->next_to_clean & (TX_RING_SIZE-1)); -+ if (TX_DESC_INFO(ring, ring->next_to_clean).desc_postop & PASEMI_CHECK_SIG) { -+ /* Need to make sure signature matched, -+ * if not - return error */ -+ if (!(ring->desc[ring_idx + 1] & (1ULL << 63))) -+ crp->crp_etype = -EINVAL; -+ } -+ crypto_done(TX_DESC_INFO(ring, -+ ring->next_to_clean).cf_crp); -+ TX_DESC_INFO(ring, ring->next_to_clean).cf_crp = NULL; -+ pci_unmap_single( -+ sc->dma_pdev, -+ XCT_PTR_ADDR_LEN(ring->desc[ring_idx + 1]), -+ PCI_DMA_TODEVICE); -+ -+ ring->desc[ring_idx] = ring->desc[ring_idx + 1] = 0; -+ -+ ring->next_to_clean++; -+ for (j = 1; j < desc_size; j++) { -+ ring_idx = 2 * -+ (ring->next_to_clean & -+ (TX_RING_SIZE-1)); -+ pci_unmap_single( -+ sc->dma_pdev, -+ XCT_PTR_ADDR_LEN(ring->desc[ring_idx]), -+ PCI_DMA_TODEVICE); -+ if (ring->desc[ring_idx + 1]) -+ pci_unmap_single( -+ sc->dma_pdev, -+ XCT_PTR_ADDR_LEN( -+ ring->desc[ -+ ring_idx + 1]), -+ PCI_DMA_TODEVICE); -+ ring->desc[ring_idx] = -+ ring->desc[ring_idx + 1] = 0; -+ ring->next_to_clean++; -+ } -+ } else { -+ for (j = 0; j < desc_size; j++) { -+ ring_idx = 2 * (ring->next_to_clean & (TX_RING_SIZE-1)); -+ ring->desc[ring_idx] = -+ ring->desc[ring_idx + 1] = 0; -+ ring->next_to_clean++; -+ } -+ } -+ } -+ -+ ring->total_pktcnt += delta_cnt; -+ } -+ spin_unlock_irqrestore(&ring->clean_lock, flags); -+ -+ return 0; -+} -+ -+static void sweepup_tx(struct pasemi_softc *sc) -+{ -+ int i; -+ -+ for (i = 0; i < sc->sc_num_channels; i++) -+ pasemi_clean_tx(sc, i); -+} -+ -+static irqreturn_t pasemi_intr(int irq, void *arg, struct pt_regs *regs) -+{ -+ struct pasemi_softc *sc = arg; -+ unsigned int reg; -+ int chan = irq - sc->base_irq; -+ int chan_index = sc->base_chan + chan; -+ u64 stat = dma_status->tx_sta[chan_index]; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ if (!(stat & PAS_STATUS_CAUSE_M)) -+ return IRQ_NONE; -+ -+ pasemi_clean_tx(sc, chan); -+ -+ stat = dma_status->tx_sta[chan_index]; -+ -+ reg = PAS_IOB_DMA_TXCH_RESET_PINTC | -+ PAS_IOB_DMA_TXCH_RESET_PCNT(sc->tx[chan].total_pktcnt); -+ -+ if (stat & PAS_STATUS_SOFT) -+ reg |= PAS_IOB_DMA_RXCH_RESET_SINTC; -+ -+ out_le32(sc->iob_regs + PAS_IOB_DMA_TXCH_RESET(chan_index), reg); -+ -+ -+ return IRQ_HANDLED; -+} -+ -+static int pasemi_dma_setup_tx_resources(struct pasemi_softc *sc, int chan) -+{ -+ u32 val; -+ int chan_index = chan + sc->base_chan; -+ int ret; -+ struct pasemi_fnu_txring *ring; -+ -+ ring = &sc->tx[chan]; -+ -+ spin_lock_init(&ring->fill_lock); -+ spin_lock_init(&ring->clean_lock); -+ -+ ring->desc_info = kzalloc(sizeof(struct pasemi_desc_info) * -+ TX_RING_SIZE, GFP_KERNEL); -+ if (!ring->desc_info) -+ return -ENOMEM; -+ -+ /* Allocate descriptors */ -+ ring->desc = dma_alloc_coherent(&sc->dma_pdev->dev, -+ TX_RING_SIZE * -+ 2 * sizeof(u64), -+ &ring->dma, GFP_KERNEL); -+ if (!ring->desc) -+ return -ENOMEM; -+ -+ memset((void *) ring->desc, 0, TX_RING_SIZE * 2 * sizeof(u64)); -+ -+ out_le32(sc->iob_regs + PAS_IOB_DMA_TXCH_RESET(chan_index), 0x30); -+ -+ ring->total_pktcnt = 0; -+ -+ out_le32(sc->dma_regs + PAS_DMA_TXCHAN_BASEL(chan_index), -+ PAS_DMA_TXCHAN_BASEL_BRBL(ring->dma)); -+ -+ val = PAS_DMA_TXCHAN_BASEU_BRBH(ring->dma >> 32); -+ val |= PAS_DMA_TXCHAN_BASEU_SIZ(TX_RING_SIZE >> 2); -+ -+ out_le32(sc->dma_regs + PAS_DMA_TXCHAN_BASEU(chan_index), val); -+ -+ out_le32(sc->dma_regs + PAS_DMA_TXCHAN_CFG(chan_index), -+ PAS_DMA_TXCHAN_CFG_TY_FUNC | -+ PAS_DMA_TXCHAN_CFG_TATTR(chan) | -+ PAS_DMA_TXCHAN_CFG_WT(2)); -+ -+ /* enable tx channel */ -+ out_le32(sc->dma_regs + -+ PAS_DMA_TXCHAN_TCMDSTA(chan_index), -+ PAS_DMA_TXCHAN_TCMDSTA_EN); -+ -+ out_le32(sc->iob_regs + PAS_IOB_DMA_TXCH_CFG(chan_index), -+ PAS_IOB_DMA_TXCH_CFG_CNTTH(1000)); -+ -+ ring->next_to_fill = 0; -+ ring->next_to_clean = 0; -+ -+ snprintf(ring->irq_name, sizeof(ring->irq_name), -+ "%s%d", "crypto", chan); -+ -+ ring->irq = irq_create_mapping(NULL, sc->base_irq + chan); -+ ret = request_irq(ring->irq, (irq_handler_t) -+ pasemi_intr, IRQF_DISABLED, ring->irq_name, sc); -+ if (ret) { -+ printk(KERN_ERR DRV_NAME ": failed to hook irq %d ret %d\n", -+ ring->irq, ret); -+ ring->irq = -1; -+ return ret; -+ } -+ -+ setup_timer(&ring->crypto_timer, (void *) sweepup_tx, (unsigned long) sc); -+ -+ return 0; -+} -+ -+static device_method_t pasemi_methods = { -+ /* crypto device methods */ -+ DEVMETHOD(cryptodev_newsession, pasemi_newsession), -+ DEVMETHOD(cryptodev_freesession, pasemi_freesession), -+ DEVMETHOD(cryptodev_process, pasemi_process), -+}; -+ -+/* Set up the crypto device structure, private data, -+ * and anything else we need before we start */ -+ -+static int __devinit -+pasemi_dma_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -+{ -+ struct pasemi_softc *sc; -+ int ret, i; -+ -+ DPRINTF(KERN_ERR "%s()\n", __FUNCTION__); -+ -+ sc = kzalloc(sizeof(*sc), GFP_KERNEL); -+ if (!sc) -+ return -ENOMEM; -+ -+ softc_device_init(sc, DRV_NAME, 1, pasemi_methods); -+ -+ pci_set_drvdata(pdev, sc); -+ -+ spin_lock_init(&sc->sc_chnlock); -+ -+ sc->sc_sessions = (struct pasemi_session **) -+ kzalloc(PASEMI_INITIAL_SESSIONS * -+ sizeof(struct pasemi_session *), GFP_ATOMIC); -+ if (sc->sc_sessions == NULL) { -+ ret = -ENOMEM; -+ goto out; -+ } -+ -+ sc->sc_nsessions = PASEMI_INITIAL_SESSIONS; -+ sc->sc_lastchn = 0; -+ sc->base_irq = pdev->irq + 6; -+ sc->base_chan = 6; -+ sc->sc_cid = -1; -+ sc->dma_pdev = pdev; -+ -+ sc->iob_pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL); -+ if (!sc->iob_pdev) { -+ dev_err(&pdev->dev, "Can't find I/O Bridge\n"); -+ ret = -ENODEV; -+ goto out; -+ } -+ -+ /* This is hardcoded and ugly, but we have some firmware versions -+ * who don't provide the register space in the device tree. Luckily -+ * they are at well-known locations so we can just do the math here. -+ */ -+ sc->dma_regs = -+ ioremap(0xe0000000 + (sc->dma_pdev->devfn << 12), 0x2000); -+ sc->iob_regs = -+ ioremap(0xe0000000 + (sc->iob_pdev->devfn << 12), 0x2000); -+ if (!sc->dma_regs || !sc->iob_regs) { -+ dev_err(&pdev->dev, "Can't map registers\n"); -+ ret = -ENODEV; -+ goto out; -+ } -+ -+ dma_status = __ioremap(0xfd800000, 0x1000, 0); -+ if (!dma_status) { -+ ret = -ENODEV; -+ dev_err(&pdev->dev, "Can't map dmastatus space\n"); -+ goto out; -+ } -+ -+ sc->tx = (struct pasemi_fnu_txring *) -+ kzalloc(sizeof(struct pasemi_fnu_txring) -+ * 8, GFP_KERNEL); -+ if (!sc->tx) { -+ ret = -ENOMEM; -+ goto out; -+ } -+ -+ /* Initialize the h/w */ -+ out_le32(sc->dma_regs + PAS_DMA_COM_CFG, -+ (in_le32(sc->dma_regs + PAS_DMA_COM_CFG) | -+ PAS_DMA_COM_CFG_FWF)); -+ out_le32(sc->dma_regs + PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN); -+ -+ for (i = 0; i < PASEMI_FNU_CHANNELS; i++) { -+ sc->sc_num_channels++; -+ ret = pasemi_dma_setup_tx_resources(sc, i); -+ if (ret) -+ goto out; -+ } -+ -+ sc->sc_cid = crypto_get_driverid(softc_get_device(sc), -+ CRYPTOCAP_F_HARDWARE); -+ if (sc->sc_cid < 0) { -+ printk(KERN_ERR DRV_NAME ": could not get crypto driver id\n"); -+ ret = -ENXIO; -+ goto out; -+ } -+ -+ /* register algorithms with the framework */ -+ printk(DRV_NAME ":"); -+ -+ crypto_register(sc->sc_cid, CRYPTO_DES_CBC, 0, 0); -+ crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0); -+ crypto_register(sc->sc_cid, CRYPTO_AES_CBC, 0, 0); -+ crypto_register(sc->sc_cid, CRYPTO_ARC4, 0, 0); -+ crypto_register(sc->sc_cid, CRYPTO_SHA1, 0, 0); -+ crypto_register(sc->sc_cid, CRYPTO_MD5, 0, 0); -+ crypto_register(sc->sc_cid, CRYPTO_SHA1_HMAC, 0, 0); -+ crypto_register(sc->sc_cid, CRYPTO_MD5_HMAC, 0, 0); -+ -+ return 0; -+ -+out: -+ pasemi_dma_remove(pdev); -+ return ret; -+} -+ -+#define MAX_RETRIES 5000 -+ -+static void pasemi_free_tx_resources(struct pasemi_softc *sc, int chan) -+{ -+ struct pasemi_fnu_txring *ring = &sc->tx[chan]; -+ int chan_index = chan + sc->base_chan; -+ int retries; -+ u32 stat; -+ -+ /* Stop the channel */ -+ out_le32(sc->dma_regs + -+ PAS_DMA_TXCHAN_TCMDSTA(chan_index), -+ PAS_DMA_TXCHAN_TCMDSTA_ST); -+ -+ for (retries = 0; retries < MAX_RETRIES; retries++) { -+ stat = in_le32(sc->dma_regs + -+ PAS_DMA_TXCHAN_TCMDSTA(chan_index)); -+ if (!(stat & PAS_DMA_TXCHAN_TCMDSTA_ACT)) -+ break; -+ cond_resched(); -+ } -+ -+ if (stat & PAS_DMA_TXCHAN_TCMDSTA_ACT) -+ dev_err(&sc->dma_pdev->dev, "Failed to stop tx channel %d\n", -+ chan_index); -+ -+ /* Disable the channel */ -+ out_le32(sc->dma_regs + -+ PAS_DMA_TXCHAN_TCMDSTA(chan_index), -+ 0); -+ -+ if (ring->desc_info) -+ kfree((void *) ring->desc_info); -+ if (ring->desc) -+ dma_free_coherent(&sc->dma_pdev->dev, -+ TX_RING_SIZE * -+ 2 * sizeof(u64), -+ (void *) ring->desc, ring->dma); -+ if (ring->irq != -1) -+ free_irq(ring->irq, sc); -+ -+ del_timer(&ring->crypto_timer); -+} -+ -+static void __devexit pasemi_dma_remove(struct pci_dev *pdev) -+{ -+ struct pasemi_softc *sc = pci_get_drvdata(pdev); -+ int i; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ if (sc->sc_cid >= 0) { -+ crypto_unregister_all(sc->sc_cid); -+ } -+ -+ if (sc->tx) { -+ for (i = 0; i < sc->sc_num_channels; i++) -+ pasemi_free_tx_resources(sc, i); -+ -+ kfree(sc->tx); -+ } -+ if (sc->sc_sessions) { -+ for (i = 0; i < sc->sc_nsessions; i++) -+ kfree(sc->sc_sessions[i]); -+ kfree(sc->sc_sessions); -+ } -+ if (sc->iob_pdev) -+ pci_dev_put(sc->iob_pdev); -+ if (sc->dma_regs) -+ iounmap(sc->dma_regs); -+ if (sc->iob_regs) -+ iounmap(sc->iob_regs); -+ kfree(sc); -+} -+ -+static struct pci_device_id pasemi_dma_pci_tbl[] = { -+ { PCI_DEVICE(PCI_VENDOR_ID_PASEMI, 0xa007) }, -+}; -+ -+MODULE_DEVICE_TABLE(pci, pasemi_dma_pci_tbl); -+ -+static struct pci_driver pasemi_dma_driver = { -+ .name = "pasemi_dma", -+ .id_table = pasemi_dma_pci_tbl, -+ .probe = pasemi_dma_probe, -+ .remove = __devexit_p(pasemi_dma_remove), -+}; -+ -+static void __exit pasemi_dma_cleanup_module(void) -+{ -+ pci_unregister_driver(&pasemi_dma_driver); -+ __iounmap(dma_status); -+ dma_status = NULL; -+} -+ -+int pasemi_dma_init_module(void) -+{ -+ return pci_register_driver(&pasemi_dma_driver); -+} -+ -+module_init(pasemi_dma_init_module); -+module_exit(pasemi_dma_cleanup_module); -+ -+MODULE_LICENSE("Dual BSD/GPL"); -+MODULE_AUTHOR("Egor Martovetsky egor@pasemi.com"); -+MODULE_DESCRIPTION("OCF driver for PA Semi PWRficient DMA Crypto Engine"); -diff -Nur linux-2.6.30.orig/crypto/ocf/pasemi/pasemi_fnu.h linux-2.6.30/crypto/ocf/pasemi/pasemi_fnu.h ---- linux-2.6.30.orig/crypto/ocf/pasemi/pasemi_fnu.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/pasemi/pasemi_fnu.h 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,410 @@ -+/* -+ * Copyright (C) 2007 PA Semi, Inc -+ * -+ * Driver for the PA Semi PWRficient DMA Crypto Engine, soft state and -+ * hardware register layouts. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef PASEMI_FNU_H -+#define PASEMI_FNU_H -+ -+#include <linux/spinlock.h> -+ -+#define PASEMI_SESSION(sid) ((sid) & 0xffffffff) -+#define PASEMI_SID(sesn) ((sesn) & 0xffffffff) -+#define DPRINTF(a...) if (debug) { printk(DRV_NAME ": " a); } -+ -+/* Must be a power of two */ -+#define RX_RING_SIZE 512 -+#define TX_RING_SIZE 512 -+#define TX_DESC(ring, num) ((ring)->desc[2 * (num & (TX_RING_SIZE-1))]) -+#define TX_DESC_INFO(ring, num) ((ring)->desc_info[(num) & (TX_RING_SIZE-1)]) -+#define MAX_DESC_SIZE 8 -+#define PASEMI_INITIAL_SESSIONS 10 -+#define PASEMI_FNU_CHANNELS 8 -+ -+/* DMA descriptor */ -+struct pasemi_desc { -+ u64 quad[2*MAX_DESC_SIZE]; -+ int quad_cnt; -+ int size; -+ int postop; -+}; -+ -+/* -+ * Holds per descriptor data -+ */ -+struct pasemi_desc_info { -+ int desc_size; -+ int desc_postop; -+#define PASEMI_CHECK_SIG 0x1 -+ -+ struct cryptop *cf_crp; -+}; -+ -+/* -+ * Holds per channel data -+ */ -+struct pasemi_fnu_txring { -+ volatile u64 *desc; -+ volatile struct -+ pasemi_desc_info *desc_info; -+ dma_addr_t dma; -+ struct timer_list crypto_timer; -+ spinlock_t fill_lock; -+ spinlock_t clean_lock; -+ unsigned int next_to_fill; -+ unsigned int next_to_clean; -+ u16 total_pktcnt; -+ int irq; -+ int sesn; -+ char irq_name[10]; -+}; -+ -+/* -+ * Holds data specific to a single pasemi device. -+ */ -+struct pasemi_softc { -+ softc_device_decl sc_cdev; -+ struct pci_dev *dma_pdev; /* device backpointer */ -+ struct pci_dev *iob_pdev; /* device backpointer */ -+ void __iomem *dma_regs; -+ void __iomem *iob_regs; -+ int base_irq; -+ int base_chan; -+ int32_t sc_cid; /* crypto tag */ -+ int sc_nsessions; -+ struct pasemi_session **sc_sessions; -+ int sc_num_channels;/* number of crypto channels */ -+ -+ /* pointer to the array of txring datastructures, one txring per channel */ -+ struct pasemi_fnu_txring *tx; -+ -+ /* -+ * mutual exclusion for the channel scheduler -+ */ -+ spinlock_t sc_chnlock; -+ /* last channel used, for now use round-robin to allocate channels */ -+ int sc_lastchn; -+}; -+ -+struct pasemi_session { -+ u64 civ[2]; -+ u64 keysz; -+ u64 key[4]; -+ u64 ccmd; -+ u64 hkey[4]; -+ u64 hseq; -+ u64 giv[2]; -+ u64 hiv[4]; -+ -+ int used; -+ dma_addr_t dma_addr; -+ int chan; -+}; -+ -+/* status register layout in IOB region, at 0xfd800000 */ -+struct pasdma_status { -+ u64 rx_sta[64]; -+ u64 tx_sta[20]; -+}; -+ -+#define ALG_IS_CIPHER(alg) ((alg == CRYPTO_DES_CBC) || \ -+ (alg == CRYPTO_3DES_CBC) || \ -+ (alg == CRYPTO_AES_CBC) || \ -+ (alg == CRYPTO_ARC4) || \ -+ (alg == CRYPTO_NULL_CBC)) -+ -+#define ALG_IS_SIG(alg) ((alg == CRYPTO_MD5) || \ -+ (alg == CRYPTO_MD5_HMAC) || \ -+ (alg == CRYPTO_SHA1) || \ -+ (alg == CRYPTO_SHA1_HMAC) || \ -+ (alg == CRYPTO_NULL_HMAC)) -+ -+enum { -+ PAS_DMA_COM_TXCMD = 0x100, /* Transmit Command Register */ -+ PAS_DMA_COM_TXSTA = 0x104, /* Transmit Status Register */ -+ PAS_DMA_COM_RXCMD = 0x108, /* Receive Command Register */ -+ PAS_DMA_COM_RXSTA = 0x10c, /* Receive Status Register */ -+ PAS_DMA_COM_CFG = 0x114, /* DMA Configuration Register */ -+}; -+ -+/* All these registers live in the PCI configuration space for the DMA PCI -+ * device. Use the normal PCI config access functions for them. -+ */ -+ -+#define PAS_DMA_COM_CFG_FWF 0x18000000 -+ -+#define PAS_DMA_COM_TXCMD_EN 0x00000001 /* enable */ -+#define PAS_DMA_COM_TXSTA_ACT 0x00000001 /* active */ -+#define PAS_DMA_COM_RXCMD_EN 0x00000001 /* enable */ -+#define PAS_DMA_COM_RXSTA_ACT 0x00000001 /* active */ -+ -+#define _PAS_DMA_TXCHAN_STRIDE 0x20 /* Size per channel */ -+#define _PAS_DMA_TXCHAN_TCMDSTA 0x300 /* Command / Status */ -+#define _PAS_DMA_TXCHAN_CFG 0x304 /* Configuration */ -+#define _PAS_DMA_TXCHAN_DSCRBU 0x308 /* Descriptor BU Allocation */ -+#define _PAS_DMA_TXCHAN_INCR 0x310 /* Descriptor increment */ -+#define _PAS_DMA_TXCHAN_CNT 0x314 /* Descriptor count/offset */ -+#define _PAS_DMA_TXCHAN_BASEL 0x318 /* Descriptor ring base (low) */ -+#define _PAS_DMA_TXCHAN_BASEU 0x31c /* (high) */ -+#define PAS_DMA_TXCHAN_TCMDSTA(c) (0x300+(c)*_PAS_DMA_TXCHAN_STRIDE) -+#define PAS_DMA_TXCHAN_TCMDSTA_EN 0x00000001 /* Enabled */ -+#define PAS_DMA_TXCHAN_TCMDSTA_ST 0x00000002 /* Stop interface */ -+#define PAS_DMA_TXCHAN_TCMDSTA_ACT 0x00010000 /* Active */ -+#define PAS_DMA_TXCHAN_CFG(c) (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE) -+#define PAS_DMA_TXCHAN_CFG_TY_FUNC 0x00000002 /* Type = interface */ -+#define PAS_DMA_TXCHAN_CFG_TY_IFACE 0x00000000 /* Type = interface */ -+#define PAS_DMA_TXCHAN_CFG_TATTR_M 0x0000003c -+#define PAS_DMA_TXCHAN_CFG_TATTR_S 2 -+#define PAS_DMA_TXCHAN_CFG_TATTR(x) (((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \ -+ PAS_DMA_TXCHAN_CFG_TATTR_M) -+#define PAS_DMA_TXCHAN_CFG_WT_M 0x000001c0 -+#define PAS_DMA_TXCHAN_CFG_WT_S 6 -+#define PAS_DMA_TXCHAN_CFG_WT(x) (((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \ -+ PAS_DMA_TXCHAN_CFG_WT_M) -+#define PAS_DMA_TXCHAN_CFG_LPSQ_FAST 0x00000400 -+#define PAS_DMA_TXCHAN_CFG_LPDQ_FAST 0x00000800 -+#define PAS_DMA_TXCHAN_CFG_CF 0x00001000 /* Clean first line */ -+#define PAS_DMA_TXCHAN_CFG_CL 0x00002000 /* Clean last line */ -+#define PAS_DMA_TXCHAN_CFG_UP 0x00004000 /* update tx descr when sent */ -+#define PAS_DMA_TXCHAN_INCR(c) (0x310+(c)*_PAS_DMA_TXCHAN_STRIDE) -+#define PAS_DMA_TXCHAN_BASEL(c) (0x318+(c)*_PAS_DMA_TXCHAN_STRIDE) -+#define PAS_DMA_TXCHAN_BASEL_BRBL_M 0xffffffc0 -+#define PAS_DMA_TXCHAN_BASEL_BRBL_S 0 -+#define PAS_DMA_TXCHAN_BASEL_BRBL(x) (((x) << PAS_DMA_TXCHAN_BASEL_BRBL_S) & \ -+ PAS_DMA_TXCHAN_BASEL_BRBL_M) -+#define PAS_DMA_TXCHAN_BASEU(c) (0x31c+(c)*_PAS_DMA_TXCHAN_STRIDE) -+#define PAS_DMA_TXCHAN_BASEU_BRBH_M 0x00000fff -+#define PAS_DMA_TXCHAN_BASEU_BRBH_S 0 -+#define PAS_DMA_TXCHAN_BASEU_BRBH(x) (((x) << PAS_DMA_TXCHAN_BASEU_BRBH_S) & \ -+ PAS_DMA_TXCHAN_BASEU_BRBH_M) -+/* # of cache lines worth of buffer ring */ -+#define PAS_DMA_TXCHAN_BASEU_SIZ_M 0x3fff0000 -+#define PAS_DMA_TXCHAN_BASEU_SIZ_S 16 /* 0 = 16K */ -+#define PAS_DMA_TXCHAN_BASEU_SIZ(x) (((x) << PAS_DMA_TXCHAN_BASEU_SIZ_S) & \ -+ PAS_DMA_TXCHAN_BASEU_SIZ_M) -+ -+#define PAS_STATUS_PCNT_M 0x000000000000ffffull -+#define PAS_STATUS_PCNT_S 0 -+#define PAS_STATUS_DCNT_M 0x00000000ffff0000ull -+#define PAS_STATUS_DCNT_S 16 -+#define PAS_STATUS_BPCNT_M 0x0000ffff00000000ull -+#define PAS_STATUS_BPCNT_S 32 -+#define PAS_STATUS_CAUSE_M 0xf000000000000000ull -+#define PAS_STATUS_TIMER 0x1000000000000000ull -+#define PAS_STATUS_ERROR 0x2000000000000000ull -+#define PAS_STATUS_SOFT 0x4000000000000000ull -+#define PAS_STATUS_INT 0x8000000000000000ull -+ -+#define PAS_IOB_DMA_RXCH_CFG(i) (0x1100 + (i)*4) -+#define PAS_IOB_DMA_RXCH_CFG_CNTTH_M 0x00000fff -+#define PAS_IOB_DMA_RXCH_CFG_CNTTH_S 0 -+#define PAS_IOB_DMA_RXCH_CFG_CNTTH(x) (((x) << PAS_IOB_DMA_RXCH_CFG_CNTTH_S) & \ -+ PAS_IOB_DMA_RXCH_CFG_CNTTH_M) -+#define PAS_IOB_DMA_TXCH_CFG(i) (0x1200 + (i)*4) -+#define PAS_IOB_DMA_TXCH_CFG_CNTTH_M 0x00000fff -+#define PAS_IOB_DMA_TXCH_CFG_CNTTH_S 0 -+#define PAS_IOB_DMA_TXCH_CFG_CNTTH(x) (((x) << PAS_IOB_DMA_TXCH_CFG_CNTTH_S) & \ -+ PAS_IOB_DMA_TXCH_CFG_CNTTH_M) -+#define PAS_IOB_DMA_RXCH_STAT(i) (0x1300 + (i)*4) -+#define PAS_IOB_DMA_RXCH_STAT_INTGEN 0x00001000 -+#define PAS_IOB_DMA_RXCH_STAT_CNTDEL_M 0x00000fff -+#define PAS_IOB_DMA_RXCH_STAT_CNTDEL_S 0 -+#define PAS_IOB_DMA_RXCH_STAT_CNTDEL(x) (((x) << PAS_IOB_DMA_RXCH_STAT_CNTDEL_S) &\ -+ PAS_IOB_DMA_RXCH_STAT_CNTDEL_M) -+#define PAS_IOB_DMA_TXCH_STAT(i) (0x1400 + (i)*4) -+#define PAS_IOB_DMA_TXCH_STAT_INTGEN 0x00001000 -+#define PAS_IOB_DMA_TXCH_STAT_CNTDEL_M 0x00000fff -+#define PAS_IOB_DMA_TXCH_STAT_CNTDEL_S 0 -+#define PAS_IOB_DMA_TXCH_STAT_CNTDEL(x) (((x) << PAS_IOB_DMA_TXCH_STAT_CNTDEL_S) &\ -+ PAS_IOB_DMA_TXCH_STAT_CNTDEL_M) -+#define PAS_IOB_DMA_RXCH_RESET(i) (0x1500 + (i)*4) -+#define PAS_IOB_DMA_RXCH_RESET_PCNT_M 0xffff0000 -+#define PAS_IOB_DMA_RXCH_RESET_PCNT_S 16 -+#define PAS_IOB_DMA_RXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_RXCH_RESET_PCNT_S) & \ -+ PAS_IOB_DMA_RXCH_RESET_PCNT_M) -+#define PAS_IOB_DMA_RXCH_RESET_PCNTRST 0x00000020 -+#define PAS_IOB_DMA_RXCH_RESET_DCNTRST 0x00000010 -+#define PAS_IOB_DMA_RXCH_RESET_TINTC 0x00000008 -+#define PAS_IOB_DMA_RXCH_RESET_DINTC 0x00000004 -+#define PAS_IOB_DMA_RXCH_RESET_SINTC 0x00000002 -+#define PAS_IOB_DMA_RXCH_RESET_PINTC 0x00000001 -+#define PAS_IOB_DMA_TXCH_RESET(i) (0x1600 + (i)*4) -+#define PAS_IOB_DMA_TXCH_RESET_PCNT_M 0xffff0000 -+#define PAS_IOB_DMA_TXCH_RESET_PCNT_S 16 -+#define PAS_IOB_DMA_TXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_TXCH_RESET_PCNT_S) & \ -+ PAS_IOB_DMA_TXCH_RESET_PCNT_M) -+#define PAS_IOB_DMA_TXCH_RESET_PCNTRST 0x00000020 -+#define PAS_IOB_DMA_TXCH_RESET_DCNTRST 0x00000010 -+#define PAS_IOB_DMA_TXCH_RESET_TINTC 0x00000008 -+#define PAS_IOB_DMA_TXCH_RESET_DINTC 0x00000004 -+#define PAS_IOB_DMA_TXCH_RESET_SINTC 0x00000002 -+#define PAS_IOB_DMA_TXCH_RESET_PINTC 0x00000001 -+ -+#define PAS_IOB_DMA_COM_TIMEOUTCFG 0x1700 -+#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M 0x00ffffff -+#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S 0 -+#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(x) (((x) << PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S) & \ -+ PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M) -+ -+/* Transmit descriptor fields */ -+#define XCT_MACTX_T 0x8000000000000000ull -+#define XCT_MACTX_ST 0x4000000000000000ull -+#define XCT_MACTX_NORES 0x0000000000000000ull -+#define XCT_MACTX_8BRES 0x1000000000000000ull -+#define XCT_MACTX_24BRES 0x2000000000000000ull -+#define XCT_MACTX_40BRES 0x3000000000000000ull -+#define XCT_MACTX_I 0x0800000000000000ull -+#define XCT_MACTX_O 0x0400000000000000ull -+#define XCT_MACTX_E 0x0200000000000000ull -+#define XCT_MACTX_VLAN_M 0x0180000000000000ull -+#define XCT_MACTX_VLAN_NOP 0x0000000000000000ull -+#define XCT_MACTX_VLAN_REMOVE 0x0080000000000000ull -+#define XCT_MACTX_VLAN_INSERT 0x0100000000000000ull -+#define XCT_MACTX_VLAN_REPLACE 0x0180000000000000ull -+#define XCT_MACTX_CRC_M 0x0060000000000000ull -+#define XCT_MACTX_CRC_NOP 0x0000000000000000ull -+#define XCT_MACTX_CRC_INSERT 0x0020000000000000ull -+#define XCT_MACTX_CRC_PAD 0x0040000000000000ull -+#define XCT_MACTX_CRC_REPLACE 0x0060000000000000ull -+#define XCT_MACTX_SS 0x0010000000000000ull -+#define XCT_MACTX_LLEN_M 0x00007fff00000000ull -+#define XCT_MACTX_LLEN_S 32ull -+#define XCT_MACTX_LLEN(x) ((((long)(x)) << XCT_MACTX_LLEN_S) & \ -+ XCT_MACTX_LLEN_M) -+#define XCT_MACTX_IPH_M 0x00000000f8000000ull -+#define XCT_MACTX_IPH_S 27ull -+#define XCT_MACTX_IPH(x) ((((long)(x)) << XCT_MACTX_IPH_S) & \ -+ XCT_MACTX_IPH_M) -+#define XCT_MACTX_IPO_M 0x0000000007c00000ull -+#define XCT_MACTX_IPO_S 22ull -+#define XCT_MACTX_IPO(x) ((((long)(x)) << XCT_MACTX_IPO_S) & \ -+ XCT_MACTX_IPO_M) -+#define XCT_MACTX_CSUM_M 0x0000000000000060ull -+#define XCT_MACTX_CSUM_NOP 0x0000000000000000ull -+#define XCT_MACTX_CSUM_TCP 0x0000000000000040ull -+#define XCT_MACTX_CSUM_UDP 0x0000000000000060ull -+#define XCT_MACTX_V6 0x0000000000000010ull -+#define XCT_MACTX_C 0x0000000000000004ull -+#define XCT_MACTX_AL2 0x0000000000000002ull -+ -+#define XCT_PTR_T 0x8000000000000000ull -+#define XCT_PTR_LEN_M 0x7ffff00000000000ull -+#define XCT_PTR_LEN_S 44 -+#define XCT_PTR_LEN(x) ((((long)(x)) << XCT_PTR_LEN_S) & \ -+ XCT_PTR_LEN_M) -+#define XCT_PTR_ADDR_M 0x00000fffffffffffull -+#define XCT_PTR_ADDR_S 0 -+#define XCT_PTR_ADDR(x) ((((long)(x)) << XCT_PTR_ADDR_S) & \ -+ XCT_PTR_ADDR_M) -+ -+/* Function descriptor fields */ -+#define XCT_FUN_T 0x8000000000000000ull -+#define XCT_FUN_ST 0x4000000000000000ull -+#define XCT_FUN_NORES 0x0000000000000000ull -+#define XCT_FUN_8BRES 0x1000000000000000ull -+#define XCT_FUN_24BRES 0x2000000000000000ull -+#define XCT_FUN_40BRES 0x3000000000000000ull -+#define XCT_FUN_I 0x0800000000000000ull -+#define XCT_FUN_O 0x0400000000000000ull -+#define XCT_FUN_E 0x0200000000000000ull -+#define XCT_FUN_FUN_S 54 -+#define XCT_FUN_FUN_M 0x01c0000000000000ull -+#define XCT_FUN_FUN(num) ((((long)(num)) << XCT_FUN_FUN_S) & \ -+ XCT_FUN_FUN_M) -+#define XCT_FUN_CRM_NOP 0x0000000000000000ull -+#define XCT_FUN_CRM_SIG 0x0008000000000000ull -+#define XCT_FUN_CRM_ENC 0x0010000000000000ull -+#define XCT_FUN_CRM_DEC 0x0018000000000000ull -+#define XCT_FUN_CRM_SIG_ENC 0x0020000000000000ull -+#define XCT_FUN_CRM_ENC_SIG 0x0028000000000000ull -+#define XCT_FUN_CRM_SIG_DEC 0x0030000000000000ull -+#define XCT_FUN_CRM_DEC_SIG 0x0038000000000000ull -+#define XCT_FUN_LLEN_M 0x0007ffff00000000ull -+#define XCT_FUN_LLEN_S 32ULL -+#define XCT_FUN_LLEN(x) ((((long)(x)) << XCT_FUN_LLEN_S) & \ -+ XCT_FUN_LLEN_M) -+#define XCT_FUN_SHL_M 0x00000000f8000000ull -+#define XCT_FUN_SHL_S 27ull -+#define XCT_FUN_SHL(x) ((((long)(x)) << XCT_FUN_SHL_S) & \ -+ XCT_FUN_SHL_M) -+#define XCT_FUN_CHL_M 0x0000000007c00000ull -+#define XCT_FUN_CHL_S 22ull -+#define XCT_FUN_CHL(x) ((((long)(x)) << XCT_FUN_CHL_S) & \ -+ XCT_FUN_CHL_M) -+#define XCT_FUN_HSZ_M 0x00000000003c0000ull -+#define XCT_FUN_HSZ_S 18ull -+#define XCT_FUN_HSZ(x) ((((long)(x)) << XCT_FUN_HSZ_S) & \ -+ XCT_FUN_HSZ_M) -+#define XCT_FUN_ALG_DES 0x0000000000000000ull -+#define XCT_FUN_ALG_3DES 0x0000000000008000ull -+#define XCT_FUN_ALG_AES 0x0000000000010000ull -+#define XCT_FUN_ALG_ARC 0x0000000000018000ull -+#define XCT_FUN_ALG_KASUMI 0x0000000000020000ull -+#define XCT_FUN_BCM_ECB 0x0000000000000000ull -+#define XCT_FUN_BCM_CBC 0x0000000000001000ull -+#define XCT_FUN_BCM_CFB 0x0000000000002000ull -+#define XCT_FUN_BCM_OFB 0x0000000000003000ull -+#define XCT_FUN_BCM_CNT 0x0000000000003800ull -+#define XCT_FUN_BCM_KAS_F8 0x0000000000002800ull -+#define XCT_FUN_BCM_KAS_F9 0x0000000000001800ull -+#define XCT_FUN_BCP_NO_PAD 0x0000000000000000ull -+#define XCT_FUN_BCP_ZRO 0x0000000000000200ull -+#define XCT_FUN_BCP_PL 0x0000000000000400ull -+#define XCT_FUN_BCP_INCR 0x0000000000000600ull -+#define XCT_FUN_SIG_MD5 (0ull << 4) -+#define XCT_FUN_SIG_SHA1 (2ull << 4) -+#define XCT_FUN_SIG_HMAC_MD5 (8ull << 4) -+#define XCT_FUN_SIG_HMAC_SHA1 (10ull << 4) -+#define XCT_FUN_A 0x0000000000000008ull -+#define XCT_FUN_C 0x0000000000000004ull -+#define XCT_FUN_AL2 0x0000000000000002ull -+#define XCT_FUN_SE 0x0000000000000001ull -+ -+#define XCT_FUN_SRC_PTR(len, addr) (XCT_PTR_LEN(len) | XCT_PTR_ADDR(addr)) -+#define XCT_FUN_DST_PTR(len, addr) (XCT_FUN_SRC_PTR(len, addr) | \ -+ 0x8000000000000000ull) -+ -+#define XCT_CTRL_HDR_FUN_NUM_M 0x01c0000000000000ull -+#define XCT_CTRL_HDR_FUN_NUM_S 54 -+#define XCT_CTRL_HDR_LEN_M 0x0007ffff00000000ull -+#define XCT_CTRL_HDR_LEN_S 32 -+#define XCT_CTRL_HDR_REG_M 0x00000000000000ffull -+#define XCT_CTRL_HDR_REG_S 0 -+ -+#define XCT_CTRL_HDR(funcN,len,reg) (0x9400000000000000ull | \ -+ ((((long)(funcN)) << XCT_CTRL_HDR_FUN_NUM_S) \ -+ & XCT_CTRL_HDR_FUN_NUM_M) | \ -+ ((((long)(len)) << \ -+ XCT_CTRL_HDR_LEN_S) & XCT_CTRL_HDR_LEN_M) | \ -+ ((((long)(reg)) << \ -+ XCT_CTRL_HDR_REG_S) & XCT_CTRL_HDR_REG_M)) -+ -+/* Function config command options */ -+#define DMA_CALGO_DES 0x00 -+#define DMA_CALGO_3DES 0x01 -+#define DMA_CALGO_AES 0x02 -+#define DMA_CALGO_ARC 0x03 -+ -+#define DMA_FN_CIV0 0x02 -+#define DMA_FN_CIV1 0x03 -+#define DMA_FN_HKEY0 0x0a -+ -+#define XCT_PTR_ADDR_LEN(ptr) ((ptr) & XCT_PTR_ADDR_M), \ -+ (((ptr) & XCT_PTR_LEN_M) >> XCT_PTR_LEN_S) -+ -+#endif /* PASEMI_FNU_H */ -diff -Nur linux-2.6.30.orig/crypto/ocf/random.c linux-2.6.30/crypto/ocf/random.c ---- linux-2.6.30.orig/crypto/ocf/random.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/random.c 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,317 @@ -+/* -+ * A system independant way of adding entropy to the kernels pool -+ * this way the drivers can focus on the real work and we can take -+ * care of pushing it to the appropriate place in the kernel. -+ * -+ * This should be fast and callable from timers/interrupts -+ * -+ * Written by David McCullough <david_mccullough@securecomputing.com> -+ * Copyright (C) 2006-2007 David McCullough -+ * Copyright (C) 2004-2005 Intel Corporation. -+ * -+ * LICENSE TERMS -+ * -+ * The free distribution and use of this software in both source and binary -+ * form is allowed (with or without changes) provided that: -+ * -+ * 1. distributions of this source code include the above copyright -+ * notice, this list of conditions and the following disclaimer; -+ * -+ * 2. distributions in binary form include the above copyright -+ * notice, this list of conditions and the following disclaimer -+ * in the documentation and/or other associated materials; -+ * -+ * 3. the copyright holder's name is not used to endorse products -+ * built using this software without specific written permission. -+ * -+ * ALTERNATIVELY, provided that this notice is retained in full, this product -+ * may be distributed under the terms of the GNU General Public License (GPL), -+ * in which case the provisions of the GPL apply INSTEAD OF those given above. -+ * -+ * DISCLAIMER -+ * -+ * This software is provided 'as is' with no explicit or implied warranties -+ * in respect of its properties, including, but not limited to, correctness -+ * and/or fitness for purpose. -+ */ -+ -+#ifndef AUTOCONF_INCLUDED -+#include <linux/config.h> -+#endif -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/list.h> -+#include <linux/slab.h> -+#include <linux/wait.h> -+#include <linux/sched.h> -+#include <linux/spinlock.h> -+#include <linux/version.h> -+#include <linux/unistd.h> -+#include <linux/poll.h> -+#include <linux/random.h> -+#include <cryptodev.h> -+ -+#ifdef CONFIG_OCF_FIPS -+#include "rndtest.h" -+#endif -+ -+#ifndef HAS_RANDOM_INPUT_WAIT -+#error "Please do not enable OCF_RANDOMHARVEST unless you have applied patches" -+#endif -+ -+/* -+ * a hack to access the debug levels from the crypto driver -+ */ -+extern int crypto_debug; -+#define debug crypto_debug -+ -+/* -+ * a list of all registered random providers -+ */ -+static LIST_HEAD(random_ops); -+static int started = 0; -+static int initted = 0; -+ -+struct random_op { -+ struct list_head random_list; -+ u_int32_t driverid; -+ int (*read_random)(void *arg, u_int32_t *buf, int len); -+ void *arg; -+}; -+ -+static int random_proc(void *arg); -+ -+static pid_t randomproc = (pid_t) -1; -+static spinlock_t random_lock; -+ -+/* -+ * just init the spin locks -+ */ -+static int -+crypto_random_init(void) -+{ -+ spin_lock_init(&random_lock); -+ initted = 1; -+ return(0); -+} -+ -+/* -+ * Add the given random reader to our list (if not present) -+ * and start the thread (if not already started) -+ * -+ * we have to assume that driver id is ok for now -+ */ -+int -+crypto_rregister( -+ u_int32_t driverid, -+ int (*read_random)(void *arg, u_int32_t *buf, int len), -+ void *arg) -+{ -+ unsigned long flags; -+ int ret = 0; -+ struct random_op *rops, *tmp; -+ -+ dprintk("%s,%d: %s(0x%x, %p, %p)\n", __FILE__, __LINE__, -+ __FUNCTION__, driverid, read_random, arg); -+ -+ if (!initted) -+ crypto_random_init(); -+ -+#if 0 -+ struct cryptocap *cap; -+ -+ cap = crypto_checkdriver(driverid); -+ if (!cap) -+ return EINVAL; -+#endif -+ -+ list_for_each_entry_safe(rops, tmp, &random_ops, random_list) { -+ if (rops->driverid == driverid && rops->read_random == read_random) -+ return EEXIST; -+ } -+ -+ rops = (struct random_op *) kmalloc(sizeof(*rops), GFP_KERNEL); -+ if (!rops) -+ return ENOMEM; -+ -+ rops->driverid = driverid; -+ rops->read_random = read_random; -+ rops->arg = arg; -+ -+ spin_lock_irqsave(&random_lock, flags); -+ list_add_tail(&rops->random_list, &random_ops); -+ if (!started) { -+ randomproc = kernel_thread(random_proc, NULL, CLONE_FS|CLONE_FILES); -+ if (randomproc < 0) { -+ ret = randomproc; -+ printk("crypto: crypto_rregister cannot start random thread; " -+ "error %d", ret); -+ } else -+ started = 1; -+ } -+ spin_unlock_irqrestore(&random_lock, flags); -+ -+ return ret; -+} -+EXPORT_SYMBOL(crypto_rregister); -+ -+int -+crypto_runregister_all(u_int32_t driverid) -+{ -+ struct random_op *rops, *tmp; -+ unsigned long flags; -+ -+ dprintk("%s,%d: %s(0x%x)\n", __FILE__, __LINE__, __FUNCTION__, driverid); -+ -+ list_for_each_entry_safe(rops, tmp, &random_ops, random_list) { -+ if (rops->driverid == driverid) { -+ list_del(&rops->random_list); -+ kfree(rops); -+ } -+ } -+ -+ spin_lock_irqsave(&random_lock, flags); -+ if (list_empty(&random_ops) && started) -+ kill_pid(randomproc, SIGKILL, 1); -+ spin_unlock_irqrestore(&random_lock, flags); -+ return(0); -+} -+EXPORT_SYMBOL(crypto_runregister_all); -+ -+/* -+ * while we can add entropy to random.c continue to read random data from -+ * the drivers and push it to random. -+ */ -+static int -+random_proc(void *arg) -+{ -+ int n; -+ int wantcnt; -+ int bufcnt = 0; -+ int retval = 0; -+ int *buf = NULL; -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ daemonize(); -+ spin_lock_irq(¤t->sigmask_lock); -+ sigemptyset(¤t->blocked); -+ recalc_sigpending(current); -+ spin_unlock_irq(¤t->sigmask_lock); -+ sprintf(current->comm, "ocf-random"); -+#else -+ daemonize("ocf-random"); -+ allow_signal(SIGKILL); -+#endif -+ -+ (void) get_fs(); -+ set_fs(get_ds()); -+ -+#ifdef CONFIG_OCF_FIPS -+#define NUM_INT (RNDTEST_NBYTES/sizeof(int)) -+#else -+#define NUM_INT 32 -+#endif -+ -+ /* -+ * some devices can transferr their RNG data direct into memory, -+ * so make sure it is device friendly -+ */ -+ buf = kmalloc(NUM_INT * sizeof(int), GFP_DMA); -+ if (NULL == buf) { -+ printk("crypto: RNG could not allocate memory\n"); -+ retval = -ENOMEM; -+ goto bad_alloc; -+ } -+ -+ wantcnt = NUM_INT; /* start by adding some entropy */ -+ -+ /* -+ * its possible due to errors or driver removal that we no longer -+ * have anything to do, if so exit or we will consume all the CPU -+ * doing nothing -+ */ -+ while (!list_empty(&random_ops)) { -+ struct random_op *rops, *tmp; -+ -+#ifdef CONFIG_OCF_FIPS -+ if (wantcnt) -+ wantcnt = NUM_INT; /* FIPs mode can do 20000 bits or none */ -+#endif -+ -+ /* see if we can get enough entropy to make the world -+ * a better place. -+ */ -+ while (bufcnt < wantcnt && bufcnt < NUM_INT) { -+ list_for_each_entry_safe(rops, tmp, &random_ops, random_list) { -+ -+ n = (*rops->read_random)(rops->arg, &buf[bufcnt], -+ NUM_INT - bufcnt); -+ -+ /* on failure remove the random number generator */ -+ if (n == -1) { -+ list_del(&rops->random_list); -+ printk("crypto: RNG (driverid=0x%x) failed, disabling\n", -+ rops->driverid); -+ kfree(rops); -+ } else if (n > 0) -+ bufcnt += n; -+ } -+ /* give up CPU for a bit, just in case as this is a loop */ -+ schedule(); -+ } -+ -+ -+#ifdef CONFIG_OCF_FIPS -+ if (bufcnt > 0 && rndtest_buf((unsigned char *) &buf[0])) { -+ dprintk("crypto: buffer had fips errors, discarding\n"); -+ bufcnt = 0; -+ } -+#endif -+ -+ /* -+ * if we have a certified buffer, we can send some data -+ * to /dev/random and move along -+ */ -+ if (bufcnt > 0) { -+ /* add what we have */ -+ random_input_words(buf, bufcnt, bufcnt*sizeof(int)*8); -+ bufcnt = 0; -+ } -+ -+ /* give up CPU for a bit so we don't hog while filling */ -+ schedule(); -+ -+ /* wait for needing more */ -+ wantcnt = random_input_wait(); -+ -+ if (wantcnt <= 0) -+ wantcnt = 0; /* try to get some info again */ -+ else -+ /* round up to one word or we can loop forever */ -+ wantcnt = (wantcnt + (sizeof(int)*8)) / (sizeof(int)*8); -+ if (wantcnt > NUM_INT) { -+ wantcnt = NUM_INT; -+ } -+ -+ if (signal_pending(current)) { -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ spin_lock_irq(¤t->sigmask_lock); -+#endif -+ flush_signals(current); -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ spin_unlock_irq(¤t->sigmask_lock); -+#endif -+ } -+ } -+ -+ kfree(buf); -+ -+bad_alloc: -+ spin_lock_irq(&random_lock); -+ randomproc = (pid_t) -1; -+ started = 0; -+ spin_unlock_irq(&random_lock); -+ -+ return retval; -+} -+ -diff -Nur linux-2.6.30.orig/crypto/ocf/README linux-2.6.30/crypto/ocf/README ---- linux-2.6.30.orig/crypto/ocf/README 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/README 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,167 @@ -+README - ocf-linux-20071215 -+--------------------------- -+ -+This README provides instructions for getting ocf-linux compiled and -+operating in a generic linux environment. For other information you -+might like to visit the home page for this project: -+ -+ http://ocf-linux.sourceforge.net/ -+ -+Adding OCF to linux -+------------------- -+ -+ Not much in this file for now, just some notes. I usually build -+ the ocf support as modules but it can be built into the kernel as -+ well. To use it: -+ -+ * mknod /dev/crypto c 10 70 -+ -+ * to add OCF to your kernel source, you have two options. Apply -+ the kernel specific patch: -+ -+ cd linux-2.4*; gunzip < ocf-linux-24-XXXXXXXX.patch.gz | patch -p1 -+ cd linux-2.6*; gunzip < ocf-linux-26-XXXXXXXX.patch.gz | patch -p1 -+ -+ if you do one of the above, then you can proceed to the next step, -+ or you can do the above process by hand with using the patches against -+ linux-2.4.35 and 2.6.23 to include the ocf code under crypto/ocf. -+ Here's how to add it: -+ -+ for 2.4.35 (and later) -+ -+ cd linux-2.4.35/crypto -+ tar xvzf ocf-linux.tar.gz -+ cd .. -+ patch -p1 < crypto/ocf/patches/linux-2.4.35-ocf.patch -+ -+ for 2.6.23 (and later), find the kernel patch specific (or nearest) -+ to your kernel versions and then: -+ -+ cd linux-2.6.NN/crypto -+ tar xvzf ocf-linux.tar.gz -+ cd .. -+ patch -p1 < crypto/ocf/patches/linux-2.6.NN-ocf.patch -+ -+ It should be easy to take this patch and apply it to other more -+ recent versions of the kernels. The same patches should also work -+ relatively easily on kernels as old as 2.6.11 and 2.4.18. -+ -+ * under 2.4 if you are on a non-x86 platform, you may need to: -+ -+ cp linux-2.X.x/include/asm-i386/kmap_types.h linux-2.X.x/include/asm-YYY -+ -+ so that you can build the kernel crypto support needed for the cryptosoft -+ driver. -+ -+ * For simplicity you should enable all the crypto support in your kernel -+ except for the test driver. Likewise for the OCF options. Do not -+ enable OCF crypto drivers for HW that you do not have (for example -+ ixp4xx will not compile on non-Xscale systems). -+ -+ * make sure that cryptodev.h (from ocf-linux.tar.gz) is installed as -+ crypto/cryptodev.h in an include directory that is used for building -+ applications for your platform. For example on a host system that -+ might be: -+ -+ /usr/include/crypto/cryptodev.h -+ -+ * patch your openssl-0.9.8i code with the openssl-0.9.8i.patch. -+ (NOTE: there is no longer a need to patch ssh). The patch is against: -+ openssl-0_9_8e -+ -+ If you need a patch for an older version of openssl, you should look -+ to older OCF releases. This patch is unlikely to work on older -+ openssl versions. -+ -+ openssl-0.9.8i.patch -+ - enables --with-cryptodev for non BSD systems -+ - adds -cpu option to openssl speed for calculating CPU load -+ under linux -+ - fixes null pointer in openssl speed multi thread output. -+ - fixes test keys to work with linux crypto's more stringent -+ key checking. -+ - adds MD5/SHA acceleration (Ronen Shitrit), only enabled -+ with the --with-cryptodev-digests option -+ - fixes bug in engine code caching. -+ -+ * build crypto-tools-XXXXXXXX.tar.gz if you want to try some of the BSD -+ tools for testing OCF (ie., cryptotest). -+ -+How to load the OCF drivers -+--------------------------- -+ -+ First insert the base modules: -+ -+ insmod ocf -+ insmod cryptodev -+ -+ You can then install the software OCF driver with: -+ -+ insmod cryptosoft -+ -+ and one or more of the OCF HW drivers with: -+ -+ insmod safe -+ insmod hifn7751 -+ insmod ixp4xx -+ ... -+ -+ all the drivers take a debug option to enable verbose debug so that -+ you can see what is going on. For debug you load them as: -+ -+ insmod ocf crypto_debug=1 -+ insmod cryptodev cryptodev_debug=1 -+ insmod cryptosoft swcr_debug=1 -+ -+ You may load more than one OCF crypto driver but then there is no guarantee -+ as to which will be used. -+ -+ You can also enable debug at run time on 2.6 systems with the following: -+ -+ echo 1 > /sys/module/ocf/parameters/crypto_debug -+ echo 1 > /sys/module/cryptodev/parameters/cryptodev_debug -+ echo 1 > /sys/module/cryptosoft/parameters/swcr_debug -+ echo 1 > /sys/module/hifn7751/parameters/hifn_debug -+ echo 1 > /sys/module/safe/parameters/safe_debug -+ echo 1 > /sys/module/ixp4xx/parameters/ixp_debug -+ ... -+ -+Testing the OCF support -+----------------------- -+ -+ run "cryptotest", it should do a short test for a couple of -+ des packets. If it does everything is working. -+ -+ If this works, then ssh will use the driver when invoked as: -+ -+ ssh -c 3des username@host -+ -+ to see for sure that it is operating, enable debug as defined above. -+ -+ To get a better idea of performance run: -+ -+ cryptotest 100 4096 -+ -+ There are more options to cryptotest, see the help. -+ -+ It is also possible to use openssl to test the speed of the crypto -+ drivers. -+ -+ openssl speed -evp des -engine cryptodev -elapsed -+ openssl speed -evp des3 -engine cryptodev -elapsed -+ openssl speed -evp aes128 -engine cryptodev -elapsed -+ -+ and multiple threads (10) with: -+ -+ openssl speed -evp des -engine cryptodev -elapsed -multi 10 -+ openssl speed -evp des3 -engine cryptodev -elapsed -multi 10 -+ openssl speed -evp aes128 -engine cryptodev -elapsed -multi 10 -+ -+ for public key testing you can try: -+ -+ cryptokeytest -+ openssl speed -engine cryptodev rsa -elapsed -+ openssl speed -engine cryptodev dsa -elapsed -+ -+David McCullough -+david_mccullough@securecomputing.com -diff -Nur linux-2.6.30.orig/crypto/ocf/rndtest.c linux-2.6.30/crypto/ocf/rndtest.c ---- linux-2.6.30.orig/crypto/ocf/rndtest.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/rndtest.c 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,300 @@ -+/* $OpenBSD$ */ -+ -+/* -+ * OCF/Linux port done by David McCullough <david_mccullough@securecomputing.com> -+ * Copyright (C) 2006-2007 David McCullough -+ * Copyright (C) 2004-2005 Intel Corporation. -+ * The license and original author are listed below. -+ * -+ * Copyright (c) 2002 Jason L. Wright (jason@thought.net) -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. All advertising materials mentioning features or use of this software -+ * must display the following acknowledgement: -+ * This product includes software developed by Jason L. Wright -+ * 4. The name of the author may not be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -+ * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, -+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -+ * POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+#ifndef AUTOCONF_INCLUDED -+#include <linux/config.h> -+#endif -+#include <linux/module.h> -+#include <linux/list.h> -+#include <linux/wait.h> -+#include <linux/time.h> -+#include <linux/version.h> -+#include <linux/unistd.h> -+#include <linux/kernel.h> -+#include <linux/string.h> -+#include <linux/time.h> -+#include <cryptodev.h> -+#include "rndtest.h" -+ -+static struct rndtest_stats rndstats; -+ -+static void rndtest_test(struct rndtest_state *); -+ -+/* The tests themselves */ -+static int rndtest_monobit(struct rndtest_state *); -+static int rndtest_runs(struct rndtest_state *); -+static int rndtest_longruns(struct rndtest_state *); -+static int rndtest_chi_4(struct rndtest_state *); -+ -+static int rndtest_runs_check(struct rndtest_state *, int, int *); -+static void rndtest_runs_record(struct rndtest_state *, int, int *); -+ -+static const struct rndtest_testfunc { -+ int (*test)(struct rndtest_state *); -+} rndtest_funcs[] = { -+ { rndtest_monobit }, -+ { rndtest_runs }, -+ { rndtest_chi_4 }, -+ { rndtest_longruns }, -+}; -+ -+#define RNDTEST_NTESTS (sizeof(rndtest_funcs)/sizeof(rndtest_funcs[0])) -+ -+static void -+rndtest_test(struct rndtest_state *rsp) -+{ -+ int i, rv = 0; -+ -+ rndstats.rst_tests++; -+ for (i = 0; i < RNDTEST_NTESTS; i++) -+ rv |= (*rndtest_funcs[i].test)(rsp); -+ rsp->rs_discard = (rv != 0); -+} -+ -+ -+extern int crypto_debug; -+#define rndtest_verbose 2 -+#define rndtest_report(rsp, failure, fmt, a...) \ -+ { if (failure || crypto_debug) { printk("rng_test: " fmt "\n", a); } else; } -+ -+#define RNDTEST_MONOBIT_MINONES 9725 -+#define RNDTEST_MONOBIT_MAXONES 10275 -+ -+static int -+rndtest_monobit(struct rndtest_state *rsp) -+{ -+ int i, ones = 0, j; -+ u_int8_t r; -+ -+ for (i = 0; i < RNDTEST_NBYTES; i++) { -+ r = rsp->rs_buf[i]; -+ for (j = 0; j < 8; j++, r <<= 1) -+ if (r & 0x80) -+ ones++; -+ } -+ if (ones > RNDTEST_MONOBIT_MINONES && -+ ones < RNDTEST_MONOBIT_MAXONES) { -+ if (rndtest_verbose > 1) -+ rndtest_report(rsp, 0, "monobit pass (%d < %d < %d)", -+ RNDTEST_MONOBIT_MINONES, ones, -+ RNDTEST_MONOBIT_MAXONES); -+ return (0); -+ } else { -+ if (rndtest_verbose) -+ rndtest_report(rsp, 1, -+ "monobit failed (%d ones)", ones); -+ rndstats.rst_monobit++; -+ return (-1); -+ } -+} -+ -+#define RNDTEST_RUNS_NINTERVAL 6 -+ -+static const struct rndtest_runs_tabs { -+ u_int16_t min, max; -+} rndtest_runs_tab[] = { -+ { 2343, 2657 }, -+ { 1135, 1365 }, -+ { 542, 708 }, -+ { 251, 373 }, -+ { 111, 201 }, -+ { 111, 201 }, -+}; -+ -+static int -+rndtest_runs(struct rndtest_state *rsp) -+{ -+ int i, j, ones, zeros, rv = 0; -+ int onei[RNDTEST_RUNS_NINTERVAL], zeroi[RNDTEST_RUNS_NINTERVAL]; -+ u_int8_t c; -+ -+ bzero(onei, sizeof(onei)); -+ bzero(zeroi, sizeof(zeroi)); -+ ones = zeros = 0; -+ for (i = 0; i < RNDTEST_NBYTES; i++) { -+ c = rsp->rs_buf[i]; -+ for (j = 0; j < 8; j++, c <<= 1) { -+ if (c & 0x80) { -+ ones++; -+ rndtest_runs_record(rsp, zeros, zeroi); -+ zeros = 0; -+ } else { -+ zeros++; -+ rndtest_runs_record(rsp, ones, onei); -+ ones = 0; -+ } -+ } -+ } -+ rndtest_runs_record(rsp, ones, onei); -+ rndtest_runs_record(rsp, zeros, zeroi); -+ -+ rv |= rndtest_runs_check(rsp, 0, zeroi); -+ rv |= rndtest_runs_check(rsp, 1, onei); -+ -+ if (rv) -+ rndstats.rst_runs++; -+ -+ return (rv); -+} -+ -+static void -+rndtest_runs_record(struct rndtest_state *rsp, int len, int *intrv) -+{ -+ if (len == 0) -+ return; -+ if (len > RNDTEST_RUNS_NINTERVAL) -+ len = RNDTEST_RUNS_NINTERVAL; -+ len -= 1; -+ intrv[len]++; -+} -+ -+static int -+rndtest_runs_check(struct rndtest_state *rsp, int val, int *src) -+{ -+ int i, rv = 0; -+ -+ for (i = 0; i < RNDTEST_RUNS_NINTERVAL; i++) { -+ if (src[i] < rndtest_runs_tab[i].min || -+ src[i] > rndtest_runs_tab[i].max) { -+ rndtest_report(rsp, 1, -+ "%s interval %d failed (%d, %d-%d)", -+ val ? "ones" : "zeros", -+ i + 1, src[i], rndtest_runs_tab[i].min, -+ rndtest_runs_tab[i].max); -+ rv = -1; -+ } else { -+ rndtest_report(rsp, 0, -+ "runs pass %s interval %d (%d < %d < %d)", -+ val ? "ones" : "zeros", -+ i + 1, rndtest_runs_tab[i].min, src[i], -+ rndtest_runs_tab[i].max); -+ } -+ } -+ return (rv); -+} -+ -+static int -+rndtest_longruns(struct rndtest_state *rsp) -+{ -+ int i, j, ones = 0, zeros = 0, maxones = 0, maxzeros = 0; -+ u_int8_t c; -+ -+ for (i = 0; i < RNDTEST_NBYTES; i++) { -+ c = rsp->rs_buf[i]; -+ for (j = 0; j < 8; j++, c <<= 1) { -+ if (c & 0x80) { -+ zeros = 0; -+ ones++; -+ if (ones > maxones) -+ maxones = ones; -+ } else { -+ ones = 0; -+ zeros++; -+ if (zeros > maxzeros) -+ maxzeros = zeros; -+ } -+ } -+ } -+ -+ if (maxones < 26 && maxzeros < 26) { -+ rndtest_report(rsp, 0, "longruns pass (%d ones, %d zeros)", -+ maxones, maxzeros); -+ return (0); -+ } else { -+ rndtest_report(rsp, 1, "longruns fail (%d ones, %d zeros)", -+ maxones, maxzeros); -+ rndstats.rst_longruns++; -+ return (-1); -+ } -+} -+ -+/* -+ * chi^2 test over 4 bits: (this is called the poker test in FIPS 140-2, -+ * but it is really the chi^2 test over 4 bits (the poker test as described -+ * by Knuth vol 2 is something different, and I take him as authoritative -+ * on nomenclature over NIST). -+ */ -+#define RNDTEST_CHI4_K 16 -+#define RNDTEST_CHI4_K_MASK (RNDTEST_CHI4_K - 1) -+ -+/* -+ * The unnormalized values are used so that we don't have to worry about -+ * fractional precision. The "real" value is found by: -+ * (V - 1562500) * (16 / 5000) = Vn (where V is the unnormalized value) -+ */ -+#define RNDTEST_CHI4_VMIN 1563181 /* 2.1792 */ -+#define RNDTEST_CHI4_VMAX 1576929 /* 46.1728 */ -+ -+static int -+rndtest_chi_4(struct rndtest_state *rsp) -+{ -+ unsigned int freq[RNDTEST_CHI4_K], i, sum; -+ -+ for (i = 0; i < RNDTEST_CHI4_K; i++) -+ freq[i] = 0; -+ -+ /* Get number of occurances of each 4 bit pattern */ -+ for (i = 0; i < RNDTEST_NBYTES; i++) { -+ freq[(rsp->rs_buf[i] >> 4) & RNDTEST_CHI4_K_MASK]++; -+ freq[(rsp->rs_buf[i] >> 0) & RNDTEST_CHI4_K_MASK]++; -+ } -+ -+ for (i = 0, sum = 0; i < RNDTEST_CHI4_K; i++) -+ sum += freq[i] * freq[i]; -+ -+ if (sum >= 1563181 && sum <= 1576929) { -+ rndtest_report(rsp, 0, "chi^2(4): pass (sum %u)", sum); -+ return (0); -+ } else { -+ rndtest_report(rsp, 1, "chi^2(4): failed (sum %u)", sum); -+ rndstats.rst_chi++; -+ return (-1); -+ } -+} -+ -+int -+rndtest_buf(unsigned char *buf) -+{ -+ struct rndtest_state rsp; -+ -+ memset(&rsp, 0, sizeof(rsp)); -+ rsp.rs_buf = buf; -+ rndtest_test(&rsp); -+ return(rsp.rs_discard); -+} -+ -diff -Nur linux-2.6.30.orig/crypto/ocf/rndtest.h linux-2.6.30/crypto/ocf/rndtest.h ---- linux-2.6.30.orig/crypto/ocf/rndtest.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/rndtest.h 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,54 @@ -+/* $FreeBSD: src/sys/dev/rndtest/rndtest.h,v 1.1 2003/03/11 22:54:44 sam Exp $ */ -+/* $OpenBSD$ */ -+ -+/* -+ * Copyright (c) 2002 Jason L. Wright (jason@thought.net) -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. All advertising materials mentioning features or use of this software -+ * must display the following acknowledgement: -+ * This product includes software developed by Jason L. Wright -+ * 4. The name of the author may not be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -+ * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, -+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -+ * POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+ -+/* Some of the tests depend on these values */ -+#define RNDTEST_NBYTES 2500 -+#define RNDTEST_NBITS (8 * RNDTEST_NBYTES) -+ -+struct rndtest_state { -+ int rs_discard; /* discard/accept random data */ -+ u_int8_t *rs_buf; -+}; -+ -+struct rndtest_stats { -+ u_int32_t rst_discard; /* number of bytes discarded */ -+ u_int32_t rst_tests; /* number of test runs */ -+ u_int32_t rst_monobit; /* monobit test failures */ -+ u_int32_t rst_runs; /* 0/1 runs failures */ -+ u_int32_t rst_longruns; /* longruns failures */ -+ u_int32_t rst_chi; /* chi^2 failures */ -+}; -+ -+extern int rndtest_buf(unsigned char *buf); -diff -Nur linux-2.6.30.orig/crypto/ocf/safe/Makefile linux-2.6.30/crypto/ocf/safe/Makefile ---- linux-2.6.30.orig/crypto/ocf/safe/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/safe/Makefile 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,12 @@ -+# for SGlinux builds -+-include $(ROOTDIR)/modules/.config -+ -+obj-$(CONFIG_OCF_SAFE) += safe.o -+ -+obj ?= . -+EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/ -+ -+ifdef TOPDIR -+-include $(TOPDIR)/Rules.make -+endif -+ -diff -Nur linux-2.6.30.orig/crypto/ocf/safe/md5.c linux-2.6.30/crypto/ocf/safe/md5.c ---- linux-2.6.30.orig/crypto/ocf/safe/md5.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/safe/md5.c 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,308 @@ -+/* $KAME: md5.c,v 1.5 2000/11/08 06:13:08 itojun Exp $ */ -+/* -+ * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. Neither the name of the project nor the names of its contributors -+ * may be used to endorse or promote products derived from this software -+ * without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND -+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE -+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -+ * SUCH DAMAGE. -+ */ -+ -+#if 0 -+#include <sys/cdefs.h> -+__FBSDID("$FreeBSD: src/sys/crypto/md5.c,v 1.9 2004/01/27 19:49:19 des Exp $"); -+ -+#include <sys/types.h> -+#include <sys/cdefs.h> -+#include <sys/time.h> -+#include <sys/systm.h> -+#include <crypto/md5.h> -+#endif -+ -+#define SHIFT(X, s) (((X) << (s)) | ((X) >> (32 - (s)))) -+ -+#define F(X, Y, Z) (((X) & (Y)) | ((~X) & (Z))) -+#define G(X, Y, Z) (((X) & (Z)) | ((Y) & (~Z))) -+#define H(X, Y, Z) ((X) ^ (Y) ^ (Z)) -+#define I(X, Y, Z) ((Y) ^ ((X) | (~Z))) -+ -+#define ROUND1(a, b, c, d, k, s, i) { \ -+ (a) = (a) + F((b), (c), (d)) + X[(k)] + T[(i)]; \ -+ (a) = SHIFT((a), (s)); \ -+ (a) = (b) + (a); \ -+} -+ -+#define ROUND2(a, b, c, d, k, s, i) { \ -+ (a) = (a) + G((b), (c), (d)) + X[(k)] + T[(i)]; \ -+ (a) = SHIFT((a), (s)); \ -+ (a) = (b) + (a); \ -+} -+ -+#define ROUND3(a, b, c, d, k, s, i) { \ -+ (a) = (a) + H((b), (c), (d)) + X[(k)] + T[(i)]; \ -+ (a) = SHIFT((a), (s)); \ -+ (a) = (b) + (a); \ -+} -+ -+#define ROUND4(a, b, c, d, k, s, i) { \ -+ (a) = (a) + I((b), (c), (d)) + X[(k)] + T[(i)]; \ -+ (a) = SHIFT((a), (s)); \ -+ (a) = (b) + (a); \ -+} -+ -+#define Sa 7 -+#define Sb 12 -+#define Sc 17 -+#define Sd 22 -+ -+#define Se 5 -+#define Sf 9 -+#define Sg 14 -+#define Sh 20 -+ -+#define Si 4 -+#define Sj 11 -+#define Sk 16 -+#define Sl 23 -+ -+#define Sm 6 -+#define Sn 10 -+#define So 15 -+#define Sp 21 -+ -+#define MD5_A0 0x67452301 -+#define MD5_B0 0xefcdab89 -+#define MD5_C0 0x98badcfe -+#define MD5_D0 0x10325476 -+ -+/* Integer part of 4294967296 times abs(sin(i)), where i is in radians. */ -+static const u_int32_t T[65] = { -+ 0, -+ 0xd76aa478, 0xe8c7b756, 0x242070db, 0xc1bdceee, -+ 0xf57c0faf, 0x4787c62a, 0xa8304613, 0xfd469501, -+ 0x698098d8, 0x8b44f7af, 0xffff5bb1, 0x895cd7be, -+ 0x6b901122, 0xfd987193, 0xa679438e, 0x49b40821, -+ -+ 0xf61e2562, 0xc040b340, 0x265e5a51, 0xe9b6c7aa, -+ 0xd62f105d, 0x2441453, 0xd8a1e681, 0xe7d3fbc8, -+ 0x21e1cde6, 0xc33707d6, 0xf4d50d87, 0x455a14ed, -+ 0xa9e3e905, 0xfcefa3f8, 0x676f02d9, 0x8d2a4c8a, -+ -+ 0xfffa3942, 0x8771f681, 0x6d9d6122, 0xfde5380c, -+ 0xa4beea44, 0x4bdecfa9, 0xf6bb4b60, 0xbebfbc70, -+ 0x289b7ec6, 0xeaa127fa, 0xd4ef3085, 0x4881d05, -+ 0xd9d4d039, 0xe6db99e5, 0x1fa27cf8, 0xc4ac5665, -+ -+ 0xf4292244, 0x432aff97, 0xab9423a7, 0xfc93a039, -+ 0x655b59c3, 0x8f0ccc92, 0xffeff47d, 0x85845dd1, -+ 0x6fa87e4f, 0xfe2ce6e0, 0xa3014314, 0x4e0811a1, -+ 0xf7537e82, 0xbd3af235, 0x2ad7d2bb, 0xeb86d391, -+}; -+ -+static const u_int8_t md5_paddat[MD5_BUFLEN] = { -+ 0x80, 0, 0, 0, 0, 0, 0, 0, -+ 0, 0, 0, 0, 0, 0, 0, 0, -+ 0, 0, 0, 0, 0, 0, 0, 0, -+ 0, 0, 0, 0, 0, 0, 0, 0, -+ 0, 0, 0, 0, 0, 0, 0, 0, -+ 0, 0, 0, 0, 0, 0, 0, 0, -+ 0, 0, 0, 0, 0, 0, 0, 0, -+ 0, 0, 0, 0, 0, 0, 0, 0, -+}; -+ -+static void md5_calc(u_int8_t *, md5_ctxt *); -+ -+void md5_init(ctxt) -+ md5_ctxt *ctxt; -+{ -+ ctxt->md5_n = 0; -+ ctxt->md5_i = 0; -+ ctxt->md5_sta = MD5_A0; -+ ctxt->md5_stb = MD5_B0; -+ ctxt->md5_stc = MD5_C0; -+ ctxt->md5_std = MD5_D0; -+ bzero(ctxt->md5_buf, sizeof(ctxt->md5_buf)); -+} -+ -+void md5_loop(ctxt, input, len) -+ md5_ctxt *ctxt; -+ u_int8_t *input; -+ u_int len; /* number of bytes */ -+{ -+ u_int gap, i; -+ -+ ctxt->md5_n += len * 8; /* byte to bit */ -+ gap = MD5_BUFLEN - ctxt->md5_i; -+ -+ if (len >= gap) { -+ bcopy((void *)input, (void *)(ctxt->md5_buf + ctxt->md5_i), -+ gap); -+ md5_calc(ctxt->md5_buf, ctxt); -+ -+ for (i = gap; i + MD5_BUFLEN <= len; i += MD5_BUFLEN) { -+ md5_calc((u_int8_t *)(input + i), ctxt); -+ } -+ -+ ctxt->md5_i = len - i; -+ bcopy((void *)(input + i), (void *)ctxt->md5_buf, ctxt->md5_i); -+ } else { -+ bcopy((void *)input, (void *)(ctxt->md5_buf + ctxt->md5_i), -+ len); -+ ctxt->md5_i += len; -+ } -+} -+ -+void md5_pad(ctxt) -+ md5_ctxt *ctxt; -+{ -+ u_int gap; -+ -+ /* Don't count up padding. Keep md5_n. */ -+ gap = MD5_BUFLEN - ctxt->md5_i; -+ if (gap > 8) { -+ bcopy(md5_paddat, -+ (void *)(ctxt->md5_buf + ctxt->md5_i), -+ gap - sizeof(ctxt->md5_n)); -+ } else { -+ /* including gap == 8 */ -+ bcopy(md5_paddat, (void *)(ctxt->md5_buf + ctxt->md5_i), -+ gap); -+ md5_calc(ctxt->md5_buf, ctxt); -+ bcopy((md5_paddat + gap), -+ (void *)ctxt->md5_buf, -+ MD5_BUFLEN - sizeof(ctxt->md5_n)); -+ } -+ -+ /* 8 byte word */ -+#if BYTE_ORDER == LITTLE_ENDIAN -+ bcopy(&ctxt->md5_n8[0], &ctxt->md5_buf[56], 8); -+#endif -+#if BYTE_ORDER == BIG_ENDIAN -+ ctxt->md5_buf[56] = ctxt->md5_n8[7]; -+ ctxt->md5_buf[57] = ctxt->md5_n8[6]; -+ ctxt->md5_buf[58] = ctxt->md5_n8[5]; -+ ctxt->md5_buf[59] = ctxt->md5_n8[4]; -+ ctxt->md5_buf[60] = ctxt->md5_n8[3]; -+ ctxt->md5_buf[61] = ctxt->md5_n8[2]; -+ ctxt->md5_buf[62] = ctxt->md5_n8[1]; -+ ctxt->md5_buf[63] = ctxt->md5_n8[0]; -+#endif -+ -+ md5_calc(ctxt->md5_buf, ctxt); -+} -+ -+void md5_result(digest, ctxt) -+ u_int8_t *digest; -+ md5_ctxt *ctxt; -+{ -+ /* 4 byte words */ -+#if BYTE_ORDER == LITTLE_ENDIAN -+ bcopy(&ctxt->md5_st8[0], digest, 16); -+#endif -+#if BYTE_ORDER == BIG_ENDIAN -+ digest[ 0] = ctxt->md5_st8[ 3]; digest[ 1] = ctxt->md5_st8[ 2]; -+ digest[ 2] = ctxt->md5_st8[ 1]; digest[ 3] = ctxt->md5_st8[ 0]; -+ digest[ 4] = ctxt->md5_st8[ 7]; digest[ 5] = ctxt->md5_st8[ 6]; -+ digest[ 6] = ctxt->md5_st8[ 5]; digest[ 7] = ctxt->md5_st8[ 4]; -+ digest[ 8] = ctxt->md5_st8[11]; digest[ 9] = ctxt->md5_st8[10]; -+ digest[10] = ctxt->md5_st8[ 9]; digest[11] = ctxt->md5_st8[ 8]; -+ digest[12] = ctxt->md5_st8[15]; digest[13] = ctxt->md5_st8[14]; -+ digest[14] = ctxt->md5_st8[13]; digest[15] = ctxt->md5_st8[12]; -+#endif -+} -+ -+static void md5_calc(b64, ctxt) -+ u_int8_t *b64; -+ md5_ctxt *ctxt; -+{ -+ u_int32_t A = ctxt->md5_sta; -+ u_int32_t B = ctxt->md5_stb; -+ u_int32_t C = ctxt->md5_stc; -+ u_int32_t D = ctxt->md5_std; -+#if BYTE_ORDER == LITTLE_ENDIAN -+ u_int32_t *X = (u_int32_t *)b64; -+#endif -+#if BYTE_ORDER == BIG_ENDIAN -+ /* 4 byte words */ -+ /* what a brute force but fast! */ -+ u_int32_t X[16]; -+ u_int8_t *y = (u_int8_t *)X; -+ y[ 0] = b64[ 3]; y[ 1] = b64[ 2]; y[ 2] = b64[ 1]; y[ 3] = b64[ 0]; -+ y[ 4] = b64[ 7]; y[ 5] = b64[ 6]; y[ 6] = b64[ 5]; y[ 7] = b64[ 4]; -+ y[ 8] = b64[11]; y[ 9] = b64[10]; y[10] = b64[ 9]; y[11] = b64[ 8]; -+ y[12] = b64[15]; y[13] = b64[14]; y[14] = b64[13]; y[15] = b64[12]; -+ y[16] = b64[19]; y[17] = b64[18]; y[18] = b64[17]; y[19] = b64[16]; -+ y[20] = b64[23]; y[21] = b64[22]; y[22] = b64[21]; y[23] = b64[20]; -+ y[24] = b64[27]; y[25] = b64[26]; y[26] = b64[25]; y[27] = b64[24]; -+ y[28] = b64[31]; y[29] = b64[30]; y[30] = b64[29]; y[31] = b64[28]; -+ y[32] = b64[35]; y[33] = b64[34]; y[34] = b64[33]; y[35] = b64[32]; -+ y[36] = b64[39]; y[37] = b64[38]; y[38] = b64[37]; y[39] = b64[36]; -+ y[40] = b64[43]; y[41] = b64[42]; y[42] = b64[41]; y[43] = b64[40]; -+ y[44] = b64[47]; y[45] = b64[46]; y[46] = b64[45]; y[47] = b64[44]; -+ y[48] = b64[51]; y[49] = b64[50]; y[50] = b64[49]; y[51] = b64[48]; -+ y[52] = b64[55]; y[53] = b64[54]; y[54] = b64[53]; y[55] = b64[52]; -+ y[56] = b64[59]; y[57] = b64[58]; y[58] = b64[57]; y[59] = b64[56]; -+ y[60] = b64[63]; y[61] = b64[62]; y[62] = b64[61]; y[63] = b64[60]; -+#endif -+ -+ ROUND1(A, B, C, D, 0, Sa, 1); ROUND1(D, A, B, C, 1, Sb, 2); -+ ROUND1(C, D, A, B, 2, Sc, 3); ROUND1(B, C, D, A, 3, Sd, 4); -+ ROUND1(A, B, C, D, 4, Sa, 5); ROUND1(D, A, B, C, 5, Sb, 6); -+ ROUND1(C, D, A, B, 6, Sc, 7); ROUND1(B, C, D, A, 7, Sd, 8); -+ ROUND1(A, B, C, D, 8, Sa, 9); ROUND1(D, A, B, C, 9, Sb, 10); -+ ROUND1(C, D, A, B, 10, Sc, 11); ROUND1(B, C, D, A, 11, Sd, 12); -+ ROUND1(A, B, C, D, 12, Sa, 13); ROUND1(D, A, B, C, 13, Sb, 14); -+ ROUND1(C, D, A, B, 14, Sc, 15); ROUND1(B, C, D, A, 15, Sd, 16); -+ -+ ROUND2(A, B, C, D, 1, Se, 17); ROUND2(D, A, B, C, 6, Sf, 18); -+ ROUND2(C, D, A, B, 11, Sg, 19); ROUND2(B, C, D, A, 0, Sh, 20); -+ ROUND2(A, B, C, D, 5, Se, 21); ROUND2(D, A, B, C, 10, Sf, 22); -+ ROUND2(C, D, A, B, 15, Sg, 23); ROUND2(B, C, D, A, 4, Sh, 24); -+ ROUND2(A, B, C, D, 9, Se, 25); ROUND2(D, A, B, C, 14, Sf, 26); -+ ROUND2(C, D, A, B, 3, Sg, 27); ROUND2(B, C, D, A, 8, Sh, 28); -+ ROUND2(A, B, C, D, 13, Se, 29); ROUND2(D, A, B, C, 2, Sf, 30); -+ ROUND2(C, D, A, B, 7, Sg, 31); ROUND2(B, C, D, A, 12, Sh, 32); -+ -+ ROUND3(A, B, C, D, 5, Si, 33); ROUND3(D, A, B, C, 8, Sj, 34); -+ ROUND3(C, D, A, B, 11, Sk, 35); ROUND3(B, C, D, A, 14, Sl, 36); -+ ROUND3(A, B, C, D, 1, Si, 37); ROUND3(D, A, B, C, 4, Sj, 38); -+ ROUND3(C, D, A, B, 7, Sk, 39); ROUND3(B, C, D, A, 10, Sl, 40); -+ ROUND3(A, B, C, D, 13, Si, 41); ROUND3(D, A, B, C, 0, Sj, 42); -+ ROUND3(C, D, A, B, 3, Sk, 43); ROUND3(B, C, D, A, 6, Sl, 44); -+ ROUND3(A, B, C, D, 9, Si, 45); ROUND3(D, A, B, C, 12, Sj, 46); -+ ROUND3(C, D, A, B, 15, Sk, 47); ROUND3(B, C, D, A, 2, Sl, 48); -+ -+ ROUND4(A, B, C, D, 0, Sm, 49); ROUND4(D, A, B, C, 7, Sn, 50); -+ ROUND4(C, D, A, B, 14, So, 51); ROUND4(B, C, D, A, 5, Sp, 52); -+ ROUND4(A, B, C, D, 12, Sm, 53); ROUND4(D, A, B, C, 3, Sn, 54); -+ ROUND4(C, D, A, B, 10, So, 55); ROUND4(B, C, D, A, 1, Sp, 56); -+ ROUND4(A, B, C, D, 8, Sm, 57); ROUND4(D, A, B, C, 15, Sn, 58); -+ ROUND4(C, D, A, B, 6, So, 59); ROUND4(B, C, D, A, 13, Sp, 60); -+ ROUND4(A, B, C, D, 4, Sm, 61); ROUND4(D, A, B, C, 11, Sn, 62); -+ ROUND4(C, D, A, B, 2, So, 63); ROUND4(B, C, D, A, 9, Sp, 64); -+ -+ ctxt->md5_sta += A; -+ ctxt->md5_stb += B; -+ ctxt->md5_stc += C; -+ ctxt->md5_std += D; -+} -diff -Nur linux-2.6.30.orig/crypto/ocf/safe/md5.h linux-2.6.30/crypto/ocf/safe/md5.h ---- linux-2.6.30.orig/crypto/ocf/safe/md5.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/safe/md5.h 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,76 @@ -+/* $FreeBSD: src/sys/crypto/md5.h,v 1.4 2002/03/20 05:13:50 alfred Exp $ */ -+/* $KAME: md5.h,v 1.4 2000/03/27 04:36:22 sumikawa Exp $ */ -+ -+/* -+ * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. Neither the name of the project nor the names of its contributors -+ * may be used to endorse or promote products derived from this software -+ * without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND -+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE -+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -+ * SUCH DAMAGE. -+ */ -+ -+#ifndef _NETINET6_MD5_H_ -+#define _NETINET6_MD5_H_ -+ -+#define MD5_BUFLEN 64 -+ -+typedef struct { -+ union { -+ u_int32_t md5_state32[4]; -+ u_int8_t md5_state8[16]; -+ } md5_st; -+ -+#define md5_sta md5_st.md5_state32[0] -+#define md5_stb md5_st.md5_state32[1] -+#define md5_stc md5_st.md5_state32[2] -+#define md5_std md5_st.md5_state32[3] -+#define md5_st8 md5_st.md5_state8 -+ -+ union { -+ u_int64_t md5_count64; -+ u_int8_t md5_count8[8]; -+ } md5_count; -+#define md5_n md5_count.md5_count64 -+#define md5_n8 md5_count.md5_count8 -+ -+ u_int md5_i; -+ u_int8_t md5_buf[MD5_BUFLEN]; -+} md5_ctxt; -+ -+extern void md5_init(md5_ctxt *); -+extern void md5_loop(md5_ctxt *, u_int8_t *, u_int); -+extern void md5_pad(md5_ctxt *); -+extern void md5_result(u_int8_t *, md5_ctxt *); -+ -+/* compatibility */ -+#define MD5_CTX md5_ctxt -+#define MD5Init(x) md5_init((x)) -+#define MD5Update(x, y, z) md5_loop((x), (y), (z)) -+#define MD5Final(x, y) \ -+do { \ -+ md5_pad((y)); \ -+ md5_result((x), (y)); \ -+} while (0) -+ -+#endif /* ! _NETINET6_MD5_H_*/ -diff -Nur linux-2.6.30.orig/crypto/ocf/safe/safe.c linux-2.6.30/crypto/ocf/safe/safe.c ---- linux-2.6.30.orig/crypto/ocf/safe/safe.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/safe/safe.c 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,2288 @@ -+/*- -+ * Linux port done by David McCullough <david_mccullough@securecomputing.com> -+ * Copyright (C) 2004-2007 David McCullough -+ * The license and original author are listed below. -+ * -+ * Copyright (c) 2003 Sam Leffler, Errno Consulting -+ * Copyright (c) 2003 Global Technology Associates, Inc. -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -+ * SUCH DAMAGE. -+ * -+__FBSDID("$FreeBSD: src/sys/dev/safe/safe.c,v 1.18 2007/03/21 03:42:50 sam Exp $"); -+ */ -+ -+#ifndef AUTOCONF_INCLUDED -+#include <linux/config.h> -+#endif -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/list.h> -+#include <linux/slab.h> -+#include <linux/wait.h> -+#include <linux/sched.h> -+#include <linux/pci.h> -+#include <linux/delay.h> -+#include <linux/interrupt.h> -+#include <linux/spinlock.h> -+#include <linux/random.h> -+#include <linux/version.h> -+#include <linux/skbuff.h> -+#include <asm/io.h> -+ -+/* -+ * SafeNet SafeXcel-1141 hardware crypto accelerator -+ */ -+ -+#include <cryptodev.h> -+#include <uio.h> -+#include <safe/safereg.h> -+#include <safe/safevar.h> -+ -+#if 1 -+#define DPRINTF(a) do { \ -+ if (debug) { \ -+ printk("%s: ", sc ? \ -+ device_get_nameunit(sc->sc_dev) : "safe"); \ -+ printk a; \ -+ } \ -+ } while (0) -+#else -+#define DPRINTF(a) -+#endif -+ -+/* -+ * until we find a cleaner way, include the BSD md5/sha1 code -+ * here -+ */ -+#define HMAC_HACK 1 -+#ifdef HMAC_HACK -+#define LITTLE_ENDIAN 1234 -+#define BIG_ENDIAN 4321 -+#ifdef __LITTLE_ENDIAN -+#define BYTE_ORDER LITTLE_ENDIAN -+#endif -+#ifdef __BIG_ENDIAN -+#define BYTE_ORDER BIG_ENDIAN -+#endif -+#include <safe/md5.h> -+#include <safe/md5.c> -+#include <safe/sha1.h> -+#include <safe/sha1.c> -+ -+u_int8_t hmac_ipad_buffer[64] = { -+ 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -+ 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -+ 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -+ 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -+ 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -+ 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -+ 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -+ 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36 -+}; -+ -+u_int8_t hmac_opad_buffer[64] = { -+ 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, -+ 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, -+ 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, -+ 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, -+ 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, -+ 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, -+ 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, -+ 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C -+}; -+#endif /* HMAC_HACK */ -+ -+/* add proc entry for this */ -+struct safe_stats safestats; -+ -+#define debug safe_debug -+int safe_debug = 0; -+module_param(safe_debug, int, 0644); -+MODULE_PARM_DESC(safe_debug, "Enable debug"); -+ -+static void safe_callback(struct safe_softc *, struct safe_ringentry *); -+static void safe_feed(struct safe_softc *, struct safe_ringentry *); -+#if defined(CONFIG_OCF_RANDOMHARVEST) && !defined(SAFE_NO_RNG) -+static void safe_rng_init(struct safe_softc *); -+int safe_rngbufsize = 8; /* 32 bytes each read */ -+module_param(safe_rngbufsize, int, 0644); -+MODULE_PARM_DESC(safe_rngbufsize, "RNG polling buffer size (32-bit words)"); -+int safe_rngmaxalarm = 8; /* max alarms before reset */ -+module_param(safe_rngmaxalarm, int, 0644); -+MODULE_PARM_DESC(safe_rngmaxalarm, "RNG max alarms before reset"); -+#endif /* SAFE_NO_RNG */ -+ -+static void safe_totalreset(struct safe_softc *sc); -+static int safe_dmamap_aligned(struct safe_softc *sc, const struct safe_operand *op); -+static int safe_dmamap_uniform(struct safe_softc *sc, const struct safe_operand *op); -+static int safe_free_entry(struct safe_softc *sc, struct safe_ringentry *re); -+static int safe_kprocess(device_t dev, struct cryptkop *krp, int hint); -+static int safe_kstart(struct safe_softc *sc); -+static int safe_ksigbits(struct safe_softc *sc, struct crparam *cr); -+static void safe_kfeed(struct safe_softc *sc); -+static void safe_kpoll(unsigned long arg); -+static void safe_kload_reg(struct safe_softc *sc, u_int32_t off, -+ u_int32_t len, struct crparam *n); -+ -+static int safe_newsession(device_t, u_int32_t *, struct cryptoini *); -+static int safe_freesession(device_t, u_int64_t); -+static int safe_process(device_t, struct cryptop *, int); -+ -+static device_method_t safe_methods = { -+ /* crypto device methods */ -+ DEVMETHOD(cryptodev_newsession, safe_newsession), -+ DEVMETHOD(cryptodev_freesession,safe_freesession), -+ DEVMETHOD(cryptodev_process, safe_process), -+ DEVMETHOD(cryptodev_kprocess, safe_kprocess), -+}; -+ -+#define READ_REG(sc,r) readl((sc)->sc_base_addr + (r)) -+#define WRITE_REG(sc,r,val) writel((val), (sc)->sc_base_addr + (r)) -+ -+#define SAFE_MAX_CHIPS 8 -+static struct safe_softc *safe_chip_idx[SAFE_MAX_CHIPS]; -+ -+/* -+ * split our buffers up into safe DMAable byte fragments to avoid lockup -+ * bug in 1141 HW on rev 1.0. -+ */ -+ -+static int -+pci_map_linear( -+ struct safe_softc *sc, -+ struct safe_operand *buf, -+ void *addr, -+ int len) -+{ -+ dma_addr_t tmp; -+ int chunk, tlen = len; -+ -+ tmp = pci_map_single(sc->sc_pcidev, addr, len, PCI_DMA_BIDIRECTIONAL); -+ -+ buf->mapsize += len; -+ while (len > 0) { -+ chunk = (len > sc->sc_max_dsize) ? sc->sc_max_dsize : len; -+ buf->segs[buf->nsegs].ds_addr = tmp; -+ buf->segs[buf->nsegs].ds_len = chunk; -+ buf->segs[buf->nsegs].ds_tlen = tlen; -+ buf->nsegs++; -+ tmp += chunk; -+ len -= chunk; -+ tlen = 0; -+ } -+ return 0; -+} -+ -+/* -+ * map in a given uio buffer (great on some arches :-) -+ */ -+ -+static int -+pci_map_uio(struct safe_softc *sc, struct safe_operand *buf, struct uio *uio) -+{ -+ struct iovec *iov = uio->uio_iov; -+ int n; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ buf->mapsize = 0; -+ buf->nsegs = 0; -+ -+ for (n = 0; n < uio->uio_iovcnt; n++) { -+ pci_map_linear(sc, buf, iov->iov_base, iov->iov_len); -+ iov++; -+ } -+ -+ /* identify this buffer by the first segment */ -+ buf->map = (void *) buf->segs[0].ds_addr; -+ return(0); -+} -+ -+/* -+ * map in a given sk_buff -+ */ -+ -+static int -+pci_map_skb(struct safe_softc *sc,struct safe_operand *buf,struct sk_buff *skb) -+{ -+ int i; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ buf->mapsize = 0; -+ buf->nsegs = 0; -+ -+ pci_map_linear(sc, buf, skb->data, skb_headlen(skb)); -+ -+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { -+ pci_map_linear(sc, buf, -+ page_address(skb_shinfo(skb)->frags[i].page) + -+ skb_shinfo(skb)->frags[i].page_offset, -+ skb_shinfo(skb)->frags[i].size); -+ } -+ -+ /* identify this buffer by the first segment */ -+ buf->map = (void *) buf->segs[0].ds_addr; -+ return(0); -+} -+ -+ -+#if 0 /* not needed at this time */ -+static void -+pci_sync_operand(struct safe_softc *sc, struct safe_operand *buf) -+{ -+ int i; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ for (i = 0; i < buf->nsegs; i++) -+ pci_dma_sync_single_for_cpu(sc->sc_pcidev, buf->segs[i].ds_addr, -+ buf->segs[i].ds_len, PCI_DMA_BIDIRECTIONAL); -+} -+#endif -+ -+static void -+pci_unmap_operand(struct safe_softc *sc, struct safe_operand *buf) -+{ -+ int i; -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ for (i = 0; i < buf->nsegs; i++) { -+ if (buf->segs[i].ds_tlen) { -+ DPRINTF(("%s - unmap %d 0x%x %d\n", __FUNCTION__, i, buf->segs[i].ds_addr, buf->segs[i].ds_tlen)); -+ pci_unmap_single(sc->sc_pcidev, buf->segs[i].ds_addr, -+ buf->segs[i].ds_tlen, PCI_DMA_BIDIRECTIONAL); -+ DPRINTF(("%s - unmap %d 0x%x %d done\n", __FUNCTION__, i, buf->segs[i].ds_addr, buf->segs[i].ds_tlen)); -+ } -+ buf->segs[i].ds_addr = 0; -+ buf->segs[i].ds_len = 0; -+ buf->segs[i].ds_tlen = 0; -+ } -+ buf->nsegs = 0; -+ buf->mapsize = 0; -+ buf->map = 0; -+} -+ -+ -+/* -+ * SafeXcel Interrupt routine -+ */ -+static irqreturn_t -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) -+safe_intr(int irq, void *arg) -+#else -+safe_intr(int irq, void *arg, struct pt_regs *regs) -+#endif -+{ -+ struct safe_softc *sc = arg; -+ int stat; -+ unsigned long flags; -+ -+ stat = READ_REG(sc, SAFE_HM_STAT); -+ -+ DPRINTF(("%s(stat=0x%x)\n", __FUNCTION__, stat)); -+ -+ if (stat == 0) /* shared irq, not for us */ -+ return IRQ_NONE; -+ -+ WRITE_REG(sc, SAFE_HI_CLR, stat); /* IACK */ -+ -+ if ((stat & SAFE_INT_PE_DDONE)) { -+ /* -+ * Descriptor(s) done; scan the ring and -+ * process completed operations. -+ */ -+ spin_lock_irqsave(&sc->sc_ringmtx, flags); -+ while (sc->sc_back != sc->sc_front) { -+ struct safe_ringentry *re = sc->sc_back; -+ -+#ifdef SAFE_DEBUG -+ if (debug) { -+ safe_dump_ringstate(sc, __func__); -+ safe_dump_request(sc, __func__, re); -+ } -+#endif -+ /* -+ * safe_process marks ring entries that were allocated -+ * but not used with a csr of zero. This insures the -+ * ring front pointer never needs to be set backwards -+ * in the event that an entry is allocated but not used -+ * because of a setup error. -+ */ -+ DPRINTF(("%s re->re_desc.d_csr=0x%x\n", __FUNCTION__, re->re_desc.d_csr)); -+ if (re->re_desc.d_csr != 0) { -+ if (!SAFE_PE_CSR_IS_DONE(re->re_desc.d_csr)) { -+ DPRINTF(("%s !CSR_IS_DONE\n", __FUNCTION__)); -+ break; -+ } -+ if (!SAFE_PE_LEN_IS_DONE(re->re_desc.d_len)) { -+ DPRINTF(("%s !LEN_IS_DONE\n", __FUNCTION__)); -+ break; -+ } -+ sc->sc_nqchip--; -+ safe_callback(sc, re); -+ } -+ if (++(sc->sc_back) == sc->sc_ringtop) -+ sc->sc_back = sc->sc_ring; -+ } -+ spin_unlock_irqrestore(&sc->sc_ringmtx, flags); -+ } -+ -+ /* -+ * Check to see if we got any DMA Error -+ */ -+ if (stat & SAFE_INT_PE_ERROR) { -+ printk("%s: dmaerr dmastat %08x\n", device_get_nameunit(sc->sc_dev), -+ (int)READ_REG(sc, SAFE_PE_DMASTAT)); -+ safestats.st_dmaerr++; -+ safe_totalreset(sc); -+#if 0 -+ safe_feed(sc); -+#endif -+ } -+ -+ if (sc->sc_needwakeup) { /* XXX check high watermark */ -+ int wakeup = sc->sc_needwakeup & (CRYPTO_SYMQ|CRYPTO_ASYMQ); -+ DPRINTF(("%s: wakeup crypto %x\n", __func__, -+ sc->sc_needwakeup)); -+ sc->sc_needwakeup &= ~wakeup; -+ crypto_unblock(sc->sc_cid, wakeup); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+/* -+ * safe_feed() - post a request to chip -+ */ -+static void -+safe_feed(struct safe_softc *sc, struct safe_ringentry *re) -+{ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+#ifdef SAFE_DEBUG -+ if (debug) { -+ safe_dump_ringstate(sc, __func__); -+ safe_dump_request(sc, __func__, re); -+ } -+#endif -+ sc->sc_nqchip++; -+ if (sc->sc_nqchip > safestats.st_maxqchip) -+ safestats.st_maxqchip = sc->sc_nqchip; -+ /* poke h/w to check descriptor ring, any value can be written */ -+ WRITE_REG(sc, SAFE_HI_RD_DESCR, 0); -+} -+ -+#define N(a) (sizeof(a) / sizeof (a[0])) -+static void -+safe_setup_enckey(struct safe_session *ses, caddr_t key) -+{ -+ int i; -+ -+ bcopy(key, ses->ses_key, ses->ses_klen / 8); -+ -+ /* PE is little-endian, insure proper byte order */ -+ for (i = 0; i < N(ses->ses_key); i++) -+ ses->ses_key[i] = htole32(ses->ses_key[i]); -+} -+ -+static void -+safe_setup_mackey(struct safe_session *ses, int algo, caddr_t key, int klen) -+{ -+#ifdef HMAC_HACK -+ MD5_CTX md5ctx; -+ SHA1_CTX sha1ctx; -+ int i; -+ -+ -+ for (i = 0; i < klen; i++) -+ key[i] ^= HMAC_IPAD_VAL; -+ -+ if (algo == CRYPTO_MD5_HMAC) { -+ MD5Init(&md5ctx); -+ MD5Update(&md5ctx, key, klen); -+ MD5Update(&md5ctx, hmac_ipad_buffer, MD5_HMAC_BLOCK_LEN - klen); -+ bcopy(md5ctx.md5_st8, ses->ses_hminner, sizeof(md5ctx.md5_st8)); -+ } else { -+ SHA1Init(&sha1ctx); -+ SHA1Update(&sha1ctx, key, klen); -+ SHA1Update(&sha1ctx, hmac_ipad_buffer, -+ SHA1_HMAC_BLOCK_LEN - klen); -+ bcopy(sha1ctx.h.b32, ses->ses_hminner, sizeof(sha1ctx.h.b32)); -+ } -+ -+ for (i = 0; i < klen; i++) -+ key[i] ^= (HMAC_IPAD_VAL ^ HMAC_OPAD_VAL); -+ -+ if (algo == CRYPTO_MD5_HMAC) { -+ MD5Init(&md5ctx); -+ MD5Update(&md5ctx, key, klen); -+ MD5Update(&md5ctx, hmac_opad_buffer, MD5_HMAC_BLOCK_LEN - klen); -+ bcopy(md5ctx.md5_st8, ses->ses_hmouter, sizeof(md5ctx.md5_st8)); -+ } else { -+ SHA1Init(&sha1ctx); -+ SHA1Update(&sha1ctx, key, klen); -+ SHA1Update(&sha1ctx, hmac_opad_buffer, -+ SHA1_HMAC_BLOCK_LEN - klen); -+ bcopy(sha1ctx.h.b32, ses->ses_hmouter, sizeof(sha1ctx.h.b32)); -+ } -+ -+ for (i = 0; i < klen; i++) -+ key[i] ^= HMAC_OPAD_VAL; -+ -+#if 0 -+ /* -+ * this code prevents SHA working on a BE host, -+ * so it is obviously wrong. I think the byte -+ * swap setup we do with the chip fixes this for us -+ */ -+ -+ /* PE is little-endian, insure proper byte order */ -+ for (i = 0; i < N(ses->ses_hminner); i++) { -+ ses->ses_hminner[i] = htole32(ses->ses_hminner[i]); -+ ses->ses_hmouter[i] = htole32(ses->ses_hmouter[i]); -+ } -+#endif -+#else /* HMAC_HACK */ -+ printk("safe: md5/sha not implemented\n"); -+#endif /* HMAC_HACK */ -+} -+#undef N -+ -+/* -+ * Allocate a new 'session' and return an encoded session id. 'sidp' -+ * contains our registration id, and should contain an encoded session -+ * id on successful allocation. -+ */ -+static int -+safe_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri) -+{ -+ struct safe_softc *sc = device_get_softc(dev); -+ struct cryptoini *c, *encini = NULL, *macini = NULL; -+ struct safe_session *ses = NULL; -+ int sesn; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ if (sidp == NULL || cri == NULL || sc == NULL) -+ return (EINVAL); -+ -+ for (c = cri; c != NULL; c = c->cri_next) { -+ if (c->cri_alg == CRYPTO_MD5_HMAC || -+ c->cri_alg == CRYPTO_SHA1_HMAC || -+ c->cri_alg == CRYPTO_NULL_HMAC) { -+ if (macini) -+ return (EINVAL); -+ macini = c; -+ } else if (c->cri_alg == CRYPTO_DES_CBC || -+ c->cri_alg == CRYPTO_3DES_CBC || -+ c->cri_alg == CRYPTO_AES_CBC || -+ c->cri_alg == CRYPTO_NULL_CBC) { -+ if (encini) -+ return (EINVAL); -+ encini = c; -+ } else -+ return (EINVAL); -+ } -+ if (encini == NULL && macini == NULL) -+ return (EINVAL); -+ if (encini) { /* validate key length */ -+ switch (encini->cri_alg) { -+ case CRYPTO_DES_CBC: -+ if (encini->cri_klen != 64) -+ return (EINVAL); -+ break; -+ case CRYPTO_3DES_CBC: -+ if (encini->cri_klen != 192) -+ return (EINVAL); -+ break; -+ case CRYPTO_AES_CBC: -+ if (encini->cri_klen != 128 && -+ encini->cri_klen != 192 && -+ encini->cri_klen != 256) -+ return (EINVAL); -+ break; -+ } -+ } -+ -+ if (sc->sc_sessions == NULL) { -+ ses = sc->sc_sessions = (struct safe_session *) -+ kmalloc(sizeof(struct safe_session), SLAB_ATOMIC); -+ if (ses == NULL) -+ return (ENOMEM); -+ memset(ses, 0, sizeof(struct safe_session)); -+ sesn = 0; -+ sc->sc_nsessions = 1; -+ } else { -+ for (sesn = 0; sesn < sc->sc_nsessions; sesn++) { -+ if (sc->sc_sessions[sesn].ses_used == 0) { -+ ses = &sc->sc_sessions[sesn]; -+ break; -+ } -+ } -+ -+ if (ses == NULL) { -+ sesn = sc->sc_nsessions; -+ ses = (struct safe_session *) -+ kmalloc((sesn + 1) * sizeof(struct safe_session), SLAB_ATOMIC); -+ if (ses == NULL) -+ return (ENOMEM); -+ memset(ses, 0, (sesn + 1) * sizeof(struct safe_session)); -+ bcopy(sc->sc_sessions, ses, sesn * -+ sizeof(struct safe_session)); -+ bzero(sc->sc_sessions, sesn * -+ sizeof(struct safe_session)); -+ kfree(sc->sc_sessions); -+ sc->sc_sessions = ses; -+ ses = &sc->sc_sessions[sesn]; -+ sc->sc_nsessions++; -+ } -+ } -+ -+ bzero(ses, sizeof(struct safe_session)); -+ ses->ses_used = 1; -+ -+ if (encini) { -+ /* get an IV */ -+ /* XXX may read fewer than requested */ -+ read_random(ses->ses_iv, sizeof(ses->ses_iv)); -+ -+ ses->ses_klen = encini->cri_klen; -+ if (encini->cri_key != NULL) -+ safe_setup_enckey(ses, encini->cri_key); -+ } -+ -+ if (macini) { -+ ses->ses_mlen = macini->cri_mlen; -+ if (ses->ses_mlen == 0) { -+ if (macini->cri_alg == CRYPTO_MD5_HMAC) -+ ses->ses_mlen = MD5_HASH_LEN; -+ else -+ ses->ses_mlen = SHA1_HASH_LEN; -+ } -+ -+ if (macini->cri_key != NULL) { -+ safe_setup_mackey(ses, macini->cri_alg, macini->cri_key, -+ macini->cri_klen / 8); -+ } -+ } -+ -+ *sidp = SAFE_SID(device_get_unit(sc->sc_dev), sesn); -+ return (0); -+} -+ -+/* -+ * Deallocate a session. -+ */ -+static int -+safe_freesession(device_t dev, u_int64_t tid) -+{ -+ struct safe_softc *sc = device_get_softc(dev); -+ int session, ret; -+ u_int32_t sid = ((u_int32_t) tid) & 0xffffffff; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ if (sc == NULL) -+ return (EINVAL); -+ -+ session = SAFE_SESSION(sid); -+ if (session < sc->sc_nsessions) { -+ bzero(&sc->sc_sessions[session], sizeof(sc->sc_sessions[session])); -+ ret = 0; -+ } else -+ ret = EINVAL; -+ return (ret); -+} -+ -+ -+static int -+safe_process(device_t dev, struct cryptop *crp, int hint) -+{ -+ struct safe_softc *sc = device_get_softc(dev); -+ int err = 0, i, nicealign, uniform; -+ struct cryptodesc *crd1, *crd2, *maccrd, *enccrd; -+ int bypass, oplen, ivsize; -+ caddr_t iv; -+ int16_t coffset; -+ struct safe_session *ses; -+ struct safe_ringentry *re; -+ struct safe_sarec *sa; -+ struct safe_pdesc *pd; -+ u_int32_t cmd0, cmd1, staterec; -+ unsigned long flags; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ if (crp == NULL || crp->crp_callback == NULL || sc == NULL) { -+ safestats.st_invalid++; -+ return (EINVAL); -+ } -+ if (SAFE_SESSION(crp->crp_sid) >= sc->sc_nsessions) { -+ safestats.st_badsession++; -+ return (EINVAL); -+ } -+ -+ spin_lock_irqsave(&sc->sc_ringmtx, flags); -+ if (sc->sc_front == sc->sc_back && sc->sc_nqchip != 0) { -+ safestats.st_ringfull++; -+ sc->sc_needwakeup |= CRYPTO_SYMQ; -+ spin_unlock_irqrestore(&sc->sc_ringmtx, flags); -+ return (ERESTART); -+ } -+ re = sc->sc_front; -+ -+ staterec = re->re_sa.sa_staterec; /* save */ -+ /* NB: zero everything but the PE descriptor */ -+ bzero(&re->re_sa, sizeof(struct safe_ringentry) - sizeof(re->re_desc)); -+ re->re_sa.sa_staterec = staterec; /* restore */ -+ -+ re->re_crp = crp; -+ re->re_sesn = SAFE_SESSION(crp->crp_sid); -+ -+ re->re_src.nsegs = 0; -+ re->re_dst.nsegs = 0; -+ -+ if (crp->crp_flags & CRYPTO_F_SKBUF) { -+ re->re_src_skb = (struct sk_buff *)crp->crp_buf; -+ re->re_dst_skb = (struct sk_buff *)crp->crp_buf; -+ } else if (crp->crp_flags & CRYPTO_F_IOV) { -+ re->re_src_io = (struct uio *)crp->crp_buf; -+ re->re_dst_io = (struct uio *)crp->crp_buf; -+ } else { -+ safestats.st_badflags++; -+ err = EINVAL; -+ goto errout; /* XXX we don't handle contiguous blocks! */ -+ } -+ -+ sa = &re->re_sa; -+ ses = &sc->sc_sessions[re->re_sesn]; -+ -+ crd1 = crp->crp_desc; -+ if (crd1 == NULL) { -+ safestats.st_nodesc++; -+ err = EINVAL; -+ goto errout; -+ } -+ crd2 = crd1->crd_next; -+ -+ cmd0 = SAFE_SA_CMD0_BASIC; /* basic group operation */ -+ cmd1 = 0; -+ if (crd2 == NULL) { -+ if (crd1->crd_alg == CRYPTO_MD5_HMAC || -+ crd1->crd_alg == CRYPTO_SHA1_HMAC || -+ crd1->crd_alg == CRYPTO_NULL_HMAC) { -+ maccrd = crd1; -+ enccrd = NULL; -+ cmd0 |= SAFE_SA_CMD0_OP_HASH; -+ } else if (crd1->crd_alg == CRYPTO_DES_CBC || -+ crd1->crd_alg == CRYPTO_3DES_CBC || -+ crd1->crd_alg == CRYPTO_AES_CBC || -+ crd1->crd_alg == CRYPTO_NULL_CBC) { -+ maccrd = NULL; -+ enccrd = crd1; -+ cmd0 |= SAFE_SA_CMD0_OP_CRYPT; -+ } else { -+ safestats.st_badalg++; -+ err = EINVAL; -+ goto errout; -+ } -+ } else { -+ if ((crd1->crd_alg == CRYPTO_MD5_HMAC || -+ crd1->crd_alg == CRYPTO_SHA1_HMAC || -+ crd1->crd_alg == CRYPTO_NULL_HMAC) && -+ (crd2->crd_alg == CRYPTO_DES_CBC || -+ crd2->crd_alg == CRYPTO_3DES_CBC || -+ crd2->crd_alg == CRYPTO_AES_CBC || -+ crd2->crd_alg == CRYPTO_NULL_CBC) && -+ ((crd2->crd_flags & CRD_F_ENCRYPT) == 0)) { -+ maccrd = crd1; -+ enccrd = crd2; -+ } else if ((crd1->crd_alg == CRYPTO_DES_CBC || -+ crd1->crd_alg == CRYPTO_3DES_CBC || -+ crd1->crd_alg == CRYPTO_AES_CBC || -+ crd1->crd_alg == CRYPTO_NULL_CBC) && -+ (crd2->crd_alg == CRYPTO_MD5_HMAC || -+ crd2->crd_alg == CRYPTO_SHA1_HMAC || -+ crd2->crd_alg == CRYPTO_NULL_HMAC) && -+ (crd1->crd_flags & CRD_F_ENCRYPT)) { -+ enccrd = crd1; -+ maccrd = crd2; -+ } else { -+ safestats.st_badalg++; -+ err = EINVAL; -+ goto errout; -+ } -+ cmd0 |= SAFE_SA_CMD0_OP_BOTH; -+ } -+ -+ if (enccrd) { -+ if (enccrd->crd_flags & CRD_F_KEY_EXPLICIT) -+ safe_setup_enckey(ses, enccrd->crd_key); -+ -+ if (enccrd->crd_alg == CRYPTO_DES_CBC) { -+ cmd0 |= SAFE_SA_CMD0_DES; -+ cmd1 |= SAFE_SA_CMD1_CBC; -+ ivsize = 2*sizeof(u_int32_t); -+ } else if (enccrd->crd_alg == CRYPTO_3DES_CBC) { -+ cmd0 |= SAFE_SA_CMD0_3DES; -+ cmd1 |= SAFE_SA_CMD1_CBC; -+ ivsize = 2*sizeof(u_int32_t); -+ } else if (enccrd->crd_alg == CRYPTO_AES_CBC) { -+ cmd0 |= SAFE_SA_CMD0_AES; -+ cmd1 |= SAFE_SA_CMD1_CBC; -+ if (ses->ses_klen == 128) -+ cmd1 |= SAFE_SA_CMD1_AES128; -+ else if (ses->ses_klen == 192) -+ cmd1 |= SAFE_SA_CMD1_AES192; -+ else -+ cmd1 |= SAFE_SA_CMD1_AES256; -+ ivsize = 4*sizeof(u_int32_t); -+ } else { -+ cmd0 |= SAFE_SA_CMD0_CRYPT_NULL; -+ ivsize = 0; -+ } -+ -+ /* -+ * Setup encrypt/decrypt state. When using basic ops -+ * we can't use an inline IV because hash/crypt offset -+ * must be from the end of the IV to the start of the -+ * crypt data and this leaves out the preceding header -+ * from the hash calculation. Instead we place the IV -+ * in the state record and set the hash/crypt offset to -+ * copy both the header+IV. -+ */ -+ if (enccrd->crd_flags & CRD_F_ENCRYPT) { -+ cmd0 |= SAFE_SA_CMD0_OUTBOUND; -+ -+ if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) -+ iv = enccrd->crd_iv; -+ else -+ iv = (caddr_t) ses->ses_iv; -+ if ((enccrd->crd_flags & CRD_F_IV_PRESENT) == 0) { -+ crypto_copyback(crp->crp_flags, crp->crp_buf, -+ enccrd->crd_inject, ivsize, iv); -+ } -+ bcopy(iv, re->re_sastate.sa_saved_iv, ivsize); -+ /* make iv LE */ -+ for (i = 0; i < ivsize/sizeof(re->re_sastate.sa_saved_iv[0]); i++) -+ re->re_sastate.sa_saved_iv[i] = -+ cpu_to_le32(re->re_sastate.sa_saved_iv[i]); -+ cmd0 |= SAFE_SA_CMD0_IVLD_STATE | SAFE_SA_CMD0_SAVEIV; -+ re->re_flags |= SAFE_QFLAGS_COPYOUTIV; -+ } else { -+ cmd0 |= SAFE_SA_CMD0_INBOUND; -+ -+ if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) { -+ bcopy(enccrd->crd_iv, -+ re->re_sastate.sa_saved_iv, ivsize); -+ } else { -+ crypto_copydata(crp->crp_flags, crp->crp_buf, -+ enccrd->crd_inject, ivsize, -+ (caddr_t)re->re_sastate.sa_saved_iv); -+ } -+ /* make iv LE */ -+ for (i = 0; i < ivsize/sizeof(re->re_sastate.sa_saved_iv[0]); i++) -+ re->re_sastate.sa_saved_iv[i] = -+ cpu_to_le32(re->re_sastate.sa_saved_iv[i]); -+ cmd0 |= SAFE_SA_CMD0_IVLD_STATE; -+ } -+ /* -+ * For basic encryption use the zero pad algorithm. -+ * This pads results to an 8-byte boundary and -+ * suppresses padding verification for inbound (i.e. -+ * decrypt) operations. -+ * -+ * NB: Not sure if the 8-byte pad boundary is a problem. -+ */ -+ cmd0 |= SAFE_SA_CMD0_PAD_ZERO; -+ -+ /* XXX assert key bufs have the same size */ -+ bcopy(ses->ses_key, sa->sa_key, sizeof(sa->sa_key)); -+ } -+ -+ if (maccrd) { -+ if (maccrd->crd_flags & CRD_F_KEY_EXPLICIT) { -+ safe_setup_mackey(ses, maccrd->crd_alg, -+ maccrd->crd_key, maccrd->crd_klen / 8); -+ } -+ -+ if (maccrd->crd_alg == CRYPTO_MD5_HMAC) { -+ cmd0 |= SAFE_SA_CMD0_MD5; -+ cmd1 |= SAFE_SA_CMD1_HMAC; /* NB: enable HMAC */ -+ } else if (maccrd->crd_alg == CRYPTO_SHA1_HMAC) { -+ cmd0 |= SAFE_SA_CMD0_SHA1; -+ cmd1 |= SAFE_SA_CMD1_HMAC; /* NB: enable HMAC */ -+ } else { -+ cmd0 |= SAFE_SA_CMD0_HASH_NULL; -+ } -+ /* -+ * Digest data is loaded from the SA and the hash -+ * result is saved to the state block where we -+ * retrieve it for return to the caller. -+ */ -+ /* XXX assert digest bufs have the same size */ -+ bcopy(ses->ses_hminner, sa->sa_indigest, -+ sizeof(sa->sa_indigest)); -+ bcopy(ses->ses_hmouter, sa->sa_outdigest, -+ sizeof(sa->sa_outdigest)); -+ -+ cmd0 |= SAFE_SA_CMD0_HSLD_SA | SAFE_SA_CMD0_SAVEHASH; -+ re->re_flags |= SAFE_QFLAGS_COPYOUTICV; -+ } -+ -+ if (enccrd && maccrd) { -+ /* -+ * The offset from hash data to the start of -+ * crypt data is the difference in the skips. -+ */ -+ bypass = maccrd->crd_skip; -+ coffset = enccrd->crd_skip - maccrd->crd_skip; -+ if (coffset < 0) { -+ DPRINTF(("%s: hash does not precede crypt; " -+ "mac skip %u enc skip %u\n", -+ __func__, maccrd->crd_skip, enccrd->crd_skip)); -+ safestats.st_skipmismatch++; -+ err = EINVAL; -+ goto errout; -+ } -+ oplen = enccrd->crd_skip + enccrd->crd_len; -+ if (maccrd->crd_skip + maccrd->crd_len != oplen) { -+ DPRINTF(("%s: hash amount %u != crypt amount %u\n", -+ __func__, maccrd->crd_skip + maccrd->crd_len, -+ oplen)); -+ safestats.st_lenmismatch++; -+ err = EINVAL; -+ goto errout; -+ } -+#ifdef SAFE_DEBUG -+ if (debug) { -+ printf("mac: skip %d, len %d, inject %d\n", -+ maccrd->crd_skip, maccrd->crd_len, -+ maccrd->crd_inject); -+ printf("enc: skip %d, len %d, inject %d\n", -+ enccrd->crd_skip, enccrd->crd_len, -+ enccrd->crd_inject); -+ printf("bypass %d coffset %d oplen %d\n", -+ bypass, coffset, oplen); -+ } -+#endif -+ if (coffset & 3) { /* offset must be 32-bit aligned */ -+ DPRINTF(("%s: coffset %u misaligned\n", -+ __func__, coffset)); -+ safestats.st_coffmisaligned++; -+ err = EINVAL; -+ goto errout; -+ } -+ coffset >>= 2; -+ if (coffset > 255) { /* offset must be <256 dwords */ -+ DPRINTF(("%s: coffset %u too big\n", -+ __func__, coffset)); -+ safestats.st_cofftoobig++; -+ err = EINVAL; -+ goto errout; -+ } -+ /* -+ * Tell the hardware to copy the header to the output. -+ * The header is defined as the data from the end of -+ * the bypass to the start of data to be encrypted. -+ * Typically this is the inline IV. Note that you need -+ * to do this even if src+dst are the same; it appears -+ * that w/o this bit the crypted data is written -+ * immediately after the bypass data. -+ */ -+ cmd1 |= SAFE_SA_CMD1_HDRCOPY; -+ /* -+ * Disable IP header mutable bit handling. This is -+ * needed to get correct HMAC calculations. -+ */ -+ cmd1 |= SAFE_SA_CMD1_MUTABLE; -+ } else { -+ if (enccrd) { -+ bypass = enccrd->crd_skip; -+ oplen = bypass + enccrd->crd_len; -+ } else { -+ bypass = maccrd->crd_skip; -+ oplen = bypass + maccrd->crd_len; -+ } -+ coffset = 0; -+ } -+ /* XXX verify multiple of 4 when using s/g */ -+ if (bypass > 96) { /* bypass offset must be <= 96 bytes */ -+ DPRINTF(("%s: bypass %u too big\n", __func__, bypass)); -+ safestats.st_bypasstoobig++; -+ err = EINVAL; -+ goto errout; -+ } -+ -+ if (crp->crp_flags & CRYPTO_F_SKBUF) { -+ if (pci_map_skb(sc, &re->re_src, re->re_src_skb)) { -+ safestats.st_noload++; -+ err = ENOMEM; -+ goto errout; -+ } -+ } else if (crp->crp_flags & CRYPTO_F_IOV) { -+ if (pci_map_uio(sc, &re->re_src, re->re_src_io)) { -+ safestats.st_noload++; -+ err = ENOMEM; -+ goto errout; -+ } -+ } -+ nicealign = safe_dmamap_aligned(sc, &re->re_src); -+ uniform = safe_dmamap_uniform(sc, &re->re_src); -+ -+ DPRINTF(("src nicealign %u uniform %u nsegs %u\n", -+ nicealign, uniform, re->re_src.nsegs)); -+ if (re->re_src.nsegs > 1) { -+ re->re_desc.d_src = sc->sc_spalloc.dma_paddr + -+ ((caddr_t) sc->sc_spfree - (caddr_t) sc->sc_spring); -+ for (i = 0; i < re->re_src_nsegs; i++) { -+ /* NB: no need to check if there's space */ -+ pd = sc->sc_spfree; -+ if (++(sc->sc_spfree) == sc->sc_springtop) -+ sc->sc_spfree = sc->sc_spring; -+ -+ KASSERT((pd->pd_flags&3) == 0 || -+ (pd->pd_flags&3) == SAFE_PD_DONE, -+ ("bogus source particle descriptor; flags %x", -+ pd->pd_flags)); -+ pd->pd_addr = re->re_src_segs[i].ds_addr; -+ pd->pd_size = re->re_src_segs[i].ds_len; -+ pd->pd_flags = SAFE_PD_READY; -+ } -+ cmd0 |= SAFE_SA_CMD0_IGATHER; -+ } else { -+ /* -+ * No need for gather, reference the operand directly. -+ */ -+ re->re_desc.d_src = re->re_src_segs[0].ds_addr; -+ } -+ -+ if (enccrd == NULL && maccrd != NULL) { -+ /* -+ * Hash op; no destination needed. -+ */ -+ } else { -+ if (crp->crp_flags & (CRYPTO_F_IOV|CRYPTO_F_SKBUF)) { -+ if (!nicealign) { -+ safestats.st_iovmisaligned++; -+ err = EINVAL; -+ goto errout; -+ } -+ if (uniform != 1) { -+ device_printf(sc->sc_dev, "!uniform source\n"); -+ if (!uniform) { -+ /* -+ * There's no way to handle the DMA -+ * requirements with this uio. We -+ * could create a separate DMA area for -+ * the result and then copy it back, -+ * but for now we just bail and return -+ * an error. Note that uio requests -+ * > SAFE_MAX_DSIZE are handled because -+ * the DMA map and segment list for the -+ * destination wil result in a -+ * destination particle list that does -+ * the necessary scatter DMA. -+ */ -+ safestats.st_iovnotuniform++; -+ err = EINVAL; -+ goto errout; -+ } -+ } else -+ re->re_dst = re->re_src; -+ } else { -+ safestats.st_badflags++; -+ err = EINVAL; -+ goto errout; -+ } -+ -+ if (re->re_dst.nsegs > 1) { -+ re->re_desc.d_dst = sc->sc_dpalloc.dma_paddr + -+ ((caddr_t) sc->sc_dpfree - (caddr_t) sc->sc_dpring); -+ for (i = 0; i < re->re_dst_nsegs; i++) { -+ pd = sc->sc_dpfree; -+ KASSERT((pd->pd_flags&3) == 0 || -+ (pd->pd_flags&3) == SAFE_PD_DONE, -+ ("bogus dest particle descriptor; flags %x", -+ pd->pd_flags)); -+ if (++(sc->sc_dpfree) == sc->sc_dpringtop) -+ sc->sc_dpfree = sc->sc_dpring; -+ pd->pd_addr = re->re_dst_segs[i].ds_addr; -+ pd->pd_flags = SAFE_PD_READY; -+ } -+ cmd0 |= SAFE_SA_CMD0_OSCATTER; -+ } else { -+ /* -+ * No need for scatter, reference the operand directly. -+ */ -+ re->re_desc.d_dst = re->re_dst_segs[0].ds_addr; -+ } -+ } -+ -+ /* -+ * All done with setup; fillin the SA command words -+ * and the packet engine descriptor. The operation -+ * is now ready for submission to the hardware. -+ */ -+ sa->sa_cmd0 = cmd0 | SAFE_SA_CMD0_IPCI | SAFE_SA_CMD0_OPCI; -+ sa->sa_cmd1 = cmd1 -+ | (coffset << SAFE_SA_CMD1_OFFSET_S) -+ | SAFE_SA_CMD1_SAREV1 /* Rev 1 SA data structure */ -+ | SAFE_SA_CMD1_SRPCI -+ ; -+ /* -+ * NB: the order of writes is important here. In case the -+ * chip is scanning the ring because of an outstanding request -+ * it might nab this one too. In that case we need to make -+ * sure the setup is complete before we write the length -+ * field of the descriptor as it signals the descriptor is -+ * ready for processing. -+ */ -+ re->re_desc.d_csr = SAFE_PE_CSR_READY | SAFE_PE_CSR_SAPCI; -+ if (maccrd) -+ re->re_desc.d_csr |= SAFE_PE_CSR_LOADSA | SAFE_PE_CSR_HASHFINAL; -+ wmb(); -+ re->re_desc.d_len = oplen -+ | SAFE_PE_LEN_READY -+ | (bypass << SAFE_PE_LEN_BYPASS_S) -+ ; -+ -+ safestats.st_ipackets++; -+ safestats.st_ibytes += oplen; -+ -+ if (++(sc->sc_front) == sc->sc_ringtop) -+ sc->sc_front = sc->sc_ring; -+ -+ /* XXX honor batching */ -+ safe_feed(sc, re); -+ spin_unlock_irqrestore(&sc->sc_ringmtx, flags); -+ return (0); -+ -+errout: -+ if (re->re_src.map != re->re_dst.map) -+ pci_unmap_operand(sc, &re->re_dst); -+ if (re->re_src.map) -+ pci_unmap_operand(sc, &re->re_src); -+ spin_unlock_irqrestore(&sc->sc_ringmtx, flags); -+ if (err != ERESTART) { -+ crp->crp_etype = err; -+ crypto_done(crp); -+ } else { -+ sc->sc_needwakeup |= CRYPTO_SYMQ; -+ } -+ return (err); -+} -+ -+static void -+safe_callback(struct safe_softc *sc, struct safe_ringentry *re) -+{ -+ struct cryptop *crp = (struct cryptop *)re->re_crp; -+ struct cryptodesc *crd; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ safestats.st_opackets++; -+ safestats.st_obytes += re->re_dst.mapsize; -+ -+ if (re->re_desc.d_csr & SAFE_PE_CSR_STATUS) { -+ device_printf(sc->sc_dev, "csr 0x%x cmd0 0x%x cmd1 0x%x\n", -+ re->re_desc.d_csr, -+ re->re_sa.sa_cmd0, re->re_sa.sa_cmd1); -+ safestats.st_peoperr++; -+ crp->crp_etype = EIO; /* something more meaningful? */ -+ } -+ -+ if (re->re_dst.map != NULL && re->re_dst.map != re->re_src.map) -+ pci_unmap_operand(sc, &re->re_dst); -+ pci_unmap_operand(sc, &re->re_src); -+ -+ /* -+ * If result was written to a differet mbuf chain, swap -+ * it in as the return value and reclaim the original. -+ */ -+ if ((crp->crp_flags & CRYPTO_F_SKBUF) && re->re_src_skb != re->re_dst_skb) { -+ device_printf(sc->sc_dev, "no CRYPTO_F_SKBUF swapping support\n"); -+ /* kfree_skb(skb) */ -+ /* crp->crp_buf = (caddr_t)re->re_dst_skb */ -+ return; -+ } -+ -+ if (re->re_flags & SAFE_QFLAGS_COPYOUTIV) { -+ /* copy out IV for future use */ -+ for (crd = crp->crp_desc; crd; crd = crd->crd_next) { -+ int i; -+ int ivsize; -+ -+ if (crd->crd_alg == CRYPTO_DES_CBC || -+ crd->crd_alg == CRYPTO_3DES_CBC) { -+ ivsize = 2*sizeof(u_int32_t); -+ } else if (crd->crd_alg == CRYPTO_AES_CBC) { -+ ivsize = 4*sizeof(u_int32_t); -+ } else -+ continue; -+ crypto_copydata(crp->crp_flags, crp->crp_buf, -+ crd->crd_skip + crd->crd_len - ivsize, ivsize, -+ (caddr_t)sc->sc_sessions[re->re_sesn].ses_iv); -+ for (i = 0; -+ i < ivsize/sizeof(sc->sc_sessions[re->re_sesn].ses_iv[0]); -+ i++) -+ sc->sc_sessions[re->re_sesn].ses_iv[i] = -+ cpu_to_le32(sc->sc_sessions[re->re_sesn].ses_iv[i]); -+ break; -+ } -+ } -+ -+ if (re->re_flags & SAFE_QFLAGS_COPYOUTICV) { -+ /* copy out ICV result */ -+ for (crd = crp->crp_desc; crd; crd = crd->crd_next) { -+ if (!(crd->crd_alg == CRYPTO_MD5_HMAC || -+ crd->crd_alg == CRYPTO_SHA1_HMAC || -+ crd->crd_alg == CRYPTO_NULL_HMAC)) -+ continue; -+ if (crd->crd_alg == CRYPTO_SHA1_HMAC) { -+ /* -+ * SHA-1 ICV's are byte-swapped; fix 'em up -+ * before copy them to their destination. -+ */ -+ re->re_sastate.sa_saved_indigest[0] = -+ cpu_to_be32(re->re_sastate.sa_saved_indigest[0]); -+ re->re_sastate.sa_saved_indigest[1] = -+ cpu_to_be32(re->re_sastate.sa_saved_indigest[1]); -+ re->re_sastate.sa_saved_indigest[2] = -+ cpu_to_be32(re->re_sastate.sa_saved_indigest[2]); -+ } else { -+ re->re_sastate.sa_saved_indigest[0] = -+ cpu_to_le32(re->re_sastate.sa_saved_indigest[0]); -+ re->re_sastate.sa_saved_indigest[1] = -+ cpu_to_le32(re->re_sastate.sa_saved_indigest[1]); -+ re->re_sastate.sa_saved_indigest[2] = -+ cpu_to_le32(re->re_sastate.sa_saved_indigest[2]); -+ } -+ crypto_copyback(crp->crp_flags, crp->crp_buf, -+ crd->crd_inject, -+ sc->sc_sessions[re->re_sesn].ses_mlen, -+ (caddr_t)re->re_sastate.sa_saved_indigest); -+ break; -+ } -+ } -+ crypto_done(crp); -+} -+ -+ -+#if defined(CONFIG_OCF_RANDOMHARVEST) && !defined(SAFE_NO_RNG) -+#define SAFE_RNG_MAXWAIT 1000 -+ -+static void -+safe_rng_init(struct safe_softc *sc) -+{ -+ u_int32_t w, v; -+ int i; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ WRITE_REG(sc, SAFE_RNG_CTRL, 0); -+ /* use default value according to the manual */ -+ WRITE_REG(sc, SAFE_RNG_CNFG, 0x834); /* magic from SafeNet */ -+ WRITE_REG(sc, SAFE_RNG_ALM_CNT, 0); -+ -+ /* -+ * There is a bug in rev 1.0 of the 1140 that when the RNG -+ * is brought out of reset the ready status flag does not -+ * work until the RNG has finished its internal initialization. -+ * -+ * So in order to determine the device is through its -+ * initialization we must read the data register, using the -+ * status reg in the read in case it is initialized. Then read -+ * the data register until it changes from the first read. -+ * Once it changes read the data register until it changes -+ * again. At this time the RNG is considered initialized. -+ * This could take between 750ms - 1000ms in time. -+ */ -+ i = 0; -+ w = READ_REG(sc, SAFE_RNG_OUT); -+ do { -+ v = READ_REG(sc, SAFE_RNG_OUT); -+ if (v != w) { -+ w = v; -+ break; -+ } -+ DELAY(10); -+ } while (++i < SAFE_RNG_MAXWAIT); -+ -+ /* Wait Until data changes again */ -+ i = 0; -+ do { -+ v = READ_REG(sc, SAFE_RNG_OUT); -+ if (v != w) -+ break; -+ DELAY(10); -+ } while (++i < SAFE_RNG_MAXWAIT); -+} -+ -+static __inline void -+safe_rng_disable_short_cycle(struct safe_softc *sc) -+{ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ WRITE_REG(sc, SAFE_RNG_CTRL, -+ READ_REG(sc, SAFE_RNG_CTRL) &~ SAFE_RNG_CTRL_SHORTEN); -+} -+ -+static __inline void -+safe_rng_enable_short_cycle(struct safe_softc *sc) -+{ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ WRITE_REG(sc, SAFE_RNG_CTRL, -+ READ_REG(sc, SAFE_RNG_CTRL) | SAFE_RNG_CTRL_SHORTEN); -+} -+ -+static __inline u_int32_t -+safe_rng_read(struct safe_softc *sc) -+{ -+ int i; -+ -+ i = 0; -+ while (READ_REG(sc, SAFE_RNG_STAT) != 0 && ++i < SAFE_RNG_MAXWAIT) -+ ; -+ return READ_REG(sc, SAFE_RNG_OUT); -+} -+ -+static int -+safe_read_random(void *arg, u_int32_t *buf, int maxwords) -+{ -+ struct safe_softc *sc = (struct safe_softc *) arg; -+ int i, rc; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ safestats.st_rng++; -+ /* -+ * Fetch the next block of data. -+ */ -+ if (maxwords > safe_rngbufsize) -+ maxwords = safe_rngbufsize; -+ if (maxwords > SAFE_RNG_MAXBUFSIZ) -+ maxwords = SAFE_RNG_MAXBUFSIZ; -+retry: -+ /* read as much as we can */ -+ for (rc = 0; rc < maxwords; rc++) { -+ if (READ_REG(sc, SAFE_RNG_STAT) != 0) -+ break; -+ buf[rc] = READ_REG(sc, SAFE_RNG_OUT); -+ } -+ if (rc == 0) -+ return 0; -+ /* -+ * Check the comparator alarm count and reset the h/w if -+ * it exceeds our threshold. This guards against the -+ * hardware oscillators resonating with external signals. -+ */ -+ if (READ_REG(sc, SAFE_RNG_ALM_CNT) > safe_rngmaxalarm) { -+ u_int32_t freq_inc, w; -+ -+ DPRINTF(("%s: alarm count %u exceeds threshold %u\n", __func__, -+ (unsigned)READ_REG(sc, SAFE_RNG_ALM_CNT), safe_rngmaxalarm)); -+ safestats.st_rngalarm++; -+ safe_rng_enable_short_cycle(sc); -+ freq_inc = 18; -+ for (i = 0; i < 64; i++) { -+ w = READ_REG(sc, SAFE_RNG_CNFG); -+ freq_inc = ((w + freq_inc) & 0x3fL); -+ w = ((w & ~0x3fL) | freq_inc); -+ WRITE_REG(sc, SAFE_RNG_CNFG, w); -+ -+ WRITE_REG(sc, SAFE_RNG_ALM_CNT, 0); -+ -+ (void) safe_rng_read(sc); -+ DELAY(25); -+ -+ if (READ_REG(sc, SAFE_RNG_ALM_CNT) == 0) { -+ safe_rng_disable_short_cycle(sc); -+ goto retry; -+ } -+ freq_inc = 1; -+ } -+ safe_rng_disable_short_cycle(sc); -+ } else -+ WRITE_REG(sc, SAFE_RNG_ALM_CNT, 0); -+ -+ return(rc); -+} -+#endif /* defined(CONFIG_OCF_RANDOMHARVEST) && !defined(SAFE_NO_RNG) */ -+ -+ -+/* -+ * Resets the board. Values in the regesters are left as is -+ * from the reset (i.e. initial values are assigned elsewhere). -+ */ -+static void -+safe_reset_board(struct safe_softc *sc) -+{ -+ u_int32_t v; -+ /* -+ * Reset the device. The manual says no delay -+ * is needed between marking and clearing reset. -+ */ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ v = READ_REG(sc, SAFE_PE_DMACFG) &~ -+ (SAFE_PE_DMACFG_PERESET | SAFE_PE_DMACFG_PDRRESET | -+ SAFE_PE_DMACFG_SGRESET); -+ WRITE_REG(sc, SAFE_PE_DMACFG, v -+ | SAFE_PE_DMACFG_PERESET -+ | SAFE_PE_DMACFG_PDRRESET -+ | SAFE_PE_DMACFG_SGRESET); -+ WRITE_REG(sc, SAFE_PE_DMACFG, v); -+} -+ -+/* -+ * Initialize registers we need to touch only once. -+ */ -+static void -+safe_init_board(struct safe_softc *sc) -+{ -+ u_int32_t v, dwords; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ v = READ_REG(sc, SAFE_PE_DMACFG); -+ v &=~ ( SAFE_PE_DMACFG_PEMODE -+ | SAFE_PE_DMACFG_FSENA /* failsafe enable */ -+ | SAFE_PE_DMACFG_GPRPCI /* gather ring on PCI */ -+ | SAFE_PE_DMACFG_SPRPCI /* scatter ring on PCI */ -+ | SAFE_PE_DMACFG_ESDESC /* endian-swap descriptors */ -+ | SAFE_PE_DMACFG_ESPDESC /* endian-swap part. desc's */ -+ | SAFE_PE_DMACFG_ESSA /* endian-swap SA's */ -+ | SAFE_PE_DMACFG_ESPACKET /* swap the packet data */ -+ ); -+ v |= SAFE_PE_DMACFG_FSENA /* failsafe enable */ -+ | SAFE_PE_DMACFG_GPRPCI /* gather ring on PCI */ -+ | SAFE_PE_DMACFG_SPRPCI /* scatter ring on PCI */ -+ | SAFE_PE_DMACFG_ESDESC /* endian-swap descriptors */ -+ | SAFE_PE_DMACFG_ESPDESC /* endian-swap part. desc's */ -+ | SAFE_PE_DMACFG_ESSA /* endian-swap SA's */ -+#if 0 -+ | SAFE_PE_DMACFG_ESPACKET /* swap the packet data */ -+#endif -+ ; -+ WRITE_REG(sc, SAFE_PE_DMACFG, v); -+ -+#ifdef __BIG_ENDIAN -+ /* tell the safenet that we are 4321 and not 1234 */ -+ WRITE_REG(sc, SAFE_ENDIAN, 0xe4e41b1b); -+#endif -+ -+ if (sc->sc_chiprev == SAFE_REV(1,0)) { -+ /* -+ * Avoid large PCI DMA transfers. Rev 1.0 has a bug where -+ * "target mode transfers" done while the chip is DMA'ing -+ * >1020 bytes cause the hardware to lockup. To avoid this -+ * we reduce the max PCI transfer size and use small source -+ * particle descriptors (<= 256 bytes). -+ */ -+ WRITE_REG(sc, SAFE_DMA_CFG, 256); -+ device_printf(sc->sc_dev, -+ "Reduce max DMA size to %u words for rev %u.%u WAR\n", -+ (unsigned) ((READ_REG(sc, SAFE_DMA_CFG)>>2) & 0xff), -+ (unsigned) SAFE_REV_MAJ(sc->sc_chiprev), -+ (unsigned) SAFE_REV_MIN(sc->sc_chiprev)); -+ sc->sc_max_dsize = 256; -+ } else { -+ sc->sc_max_dsize = SAFE_MAX_DSIZE; -+ } -+ -+ /* NB: operands+results are overlaid */ -+ WRITE_REG(sc, SAFE_PE_PDRBASE, sc->sc_ringalloc.dma_paddr); -+ WRITE_REG(sc, SAFE_PE_RDRBASE, sc->sc_ringalloc.dma_paddr); -+ /* -+ * Configure ring entry size and number of items in the ring. -+ */ -+ KASSERT((sizeof(struct safe_ringentry) % sizeof(u_int32_t)) == 0, -+ ("PE ring entry not 32-bit aligned!")); -+ dwords = sizeof(struct safe_ringentry) / sizeof(u_int32_t); -+ WRITE_REG(sc, SAFE_PE_RINGCFG, -+ (dwords << SAFE_PE_RINGCFG_OFFSET_S) | SAFE_MAX_NQUEUE); -+ WRITE_REG(sc, SAFE_PE_RINGPOLL, 0); /* disable polling */ -+ -+ WRITE_REG(sc, SAFE_PE_GRNGBASE, sc->sc_spalloc.dma_paddr); -+ WRITE_REG(sc, SAFE_PE_SRNGBASE, sc->sc_dpalloc.dma_paddr); -+ WRITE_REG(sc, SAFE_PE_PARTSIZE, -+ (SAFE_TOTAL_DPART<<16) | SAFE_TOTAL_SPART); -+ /* -+ * NB: destination particles are fixed size. We use -+ * an mbuf cluster and require all results go to -+ * clusters or smaller. -+ */ -+ WRITE_REG(sc, SAFE_PE_PARTCFG, sc->sc_max_dsize); -+ -+ /* it's now safe to enable PE mode, do it */ -+ WRITE_REG(sc, SAFE_PE_DMACFG, v | SAFE_PE_DMACFG_PEMODE); -+ -+ /* -+ * Configure hardware to use level-triggered interrupts and -+ * to interrupt after each descriptor is processed. -+ */ -+ WRITE_REG(sc, SAFE_HI_CFG, SAFE_HI_CFG_LEVEL); -+ WRITE_REG(sc, SAFE_HI_CLR, 0xffffffff); -+ WRITE_REG(sc, SAFE_HI_DESC_CNT, 1); -+ WRITE_REG(sc, SAFE_HI_MASK, SAFE_INT_PE_DDONE | SAFE_INT_PE_ERROR); -+} -+ -+ -+/* -+ * Clean up after a chip crash. -+ * It is assumed that the caller in splimp() -+ */ -+static void -+safe_cleanchip(struct safe_softc *sc) -+{ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ if (sc->sc_nqchip != 0) { -+ struct safe_ringentry *re = sc->sc_back; -+ -+ while (re != sc->sc_front) { -+ if (re->re_desc.d_csr != 0) -+ safe_free_entry(sc, re); -+ if (++re == sc->sc_ringtop) -+ re = sc->sc_ring; -+ } -+ sc->sc_back = re; -+ sc->sc_nqchip = 0; -+ } -+} -+ -+/* -+ * free a safe_q -+ * It is assumed that the caller is within splimp(). -+ */ -+static int -+safe_free_entry(struct safe_softc *sc, struct safe_ringentry *re) -+{ -+ struct cryptop *crp; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ /* -+ * Free header MCR -+ */ -+ if ((re->re_dst_skb != NULL) && (re->re_src_skb != re->re_dst_skb)) -+#ifdef NOTYET -+ m_freem(re->re_dst_m); -+#else -+ printk("%s,%d: SKB not supported\n", __FILE__, __LINE__); -+#endif -+ -+ crp = (struct cryptop *)re->re_crp; -+ -+ re->re_desc.d_csr = 0; -+ -+ crp->crp_etype = EFAULT; -+ crypto_done(crp); -+ return(0); -+} -+ -+/* -+ * Routine to reset the chip and clean up. -+ * It is assumed that the caller is in splimp() -+ */ -+static void -+safe_totalreset(struct safe_softc *sc) -+{ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ safe_reset_board(sc); -+ safe_init_board(sc); -+ safe_cleanchip(sc); -+} -+ -+/* -+ * Is the operand suitable aligned for direct DMA. Each -+ * segment must be aligned on a 32-bit boundary and all -+ * but the last segment must be a multiple of 4 bytes. -+ */ -+static int -+safe_dmamap_aligned(struct safe_softc *sc, const struct safe_operand *op) -+{ -+ int i; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ for (i = 0; i < op->nsegs; i++) { -+ if (op->segs[i].ds_addr & 3) -+ return (0); -+ if (i != (op->nsegs - 1) && (op->segs[i].ds_len & 3)) -+ return (0); -+ } -+ return (1); -+} -+ -+/* -+ * Is the operand suitable for direct DMA as the destination -+ * of an operation. The hardware requires that each ``particle'' -+ * but the last in an operation result have the same size. We -+ * fix that size at SAFE_MAX_DSIZE bytes. This routine returns -+ * 0 if some segment is not a multiple of of this size, 1 if all -+ * segments are exactly this size, or 2 if segments are at worst -+ * a multple of this size. -+ */ -+static int -+safe_dmamap_uniform(struct safe_softc *sc, const struct safe_operand *op) -+{ -+ int result = 1; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ if (op->nsegs > 0) { -+ int i; -+ -+ for (i = 0; i < op->nsegs-1; i++) { -+ if (op->segs[i].ds_len % sc->sc_max_dsize) -+ return (0); -+ if (op->segs[i].ds_len != sc->sc_max_dsize) -+ result = 2; -+ } -+ } -+ return (result); -+} -+ -+static int -+safe_kprocess(device_t dev, struct cryptkop *krp, int hint) -+{ -+ struct safe_softc *sc = device_get_softc(dev); -+ struct safe_pkq *q; -+ unsigned long flags; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ if (sc == NULL) { -+ krp->krp_status = EINVAL; -+ goto err; -+ } -+ -+ if (krp->krp_op != CRK_MOD_EXP) { -+ krp->krp_status = EOPNOTSUPP; -+ goto err; -+ } -+ -+ q = (struct safe_pkq *) kmalloc(sizeof(*q), GFP_KERNEL); -+ if (q == NULL) { -+ krp->krp_status = ENOMEM; -+ goto err; -+ } -+ memset(q, 0, sizeof(*q)); -+ q->pkq_krp = krp; -+ INIT_LIST_HEAD(&q->pkq_list); -+ -+ spin_lock_irqsave(&sc->sc_pkmtx, flags); -+ list_add_tail(&q->pkq_list, &sc->sc_pkq); -+ safe_kfeed(sc); -+ spin_unlock_irqrestore(&sc->sc_pkmtx, flags); -+ return (0); -+ -+err: -+ crypto_kdone(krp); -+ return (0); -+} -+ -+#define SAFE_CRK_PARAM_BASE 0 -+#define SAFE_CRK_PARAM_EXP 1 -+#define SAFE_CRK_PARAM_MOD 2 -+ -+static int -+safe_kstart(struct safe_softc *sc) -+{ -+ struct cryptkop *krp = sc->sc_pkq_cur->pkq_krp; -+ int exp_bits, mod_bits, base_bits; -+ u_int32_t op, a_off, b_off, c_off, d_off; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ if (krp->krp_iparams < 3 || krp->krp_oparams != 1) { -+ krp->krp_status = EINVAL; -+ return (1); -+ } -+ -+ base_bits = safe_ksigbits(sc, &krp->krp_param[SAFE_CRK_PARAM_BASE]); -+ if (base_bits > 2048) -+ goto too_big; -+ if (base_bits <= 0) /* 5. base not zero */ -+ goto too_small; -+ -+ exp_bits = safe_ksigbits(sc, &krp->krp_param[SAFE_CRK_PARAM_EXP]); -+ if (exp_bits > 2048) -+ goto too_big; -+ if (exp_bits <= 0) /* 1. exponent word length > 0 */ -+ goto too_small; /* 4. exponent not zero */ -+ -+ mod_bits = safe_ksigbits(sc, &krp->krp_param[SAFE_CRK_PARAM_MOD]); -+ if (mod_bits > 2048) -+ goto too_big; -+ if (mod_bits <= 32) /* 2. modulus word length > 1 */ -+ goto too_small; /* 8. MSW of modulus != zero */ -+ if (mod_bits < exp_bits) /* 3 modulus len >= exponent len */ -+ goto too_small; -+ if ((krp->krp_param[SAFE_CRK_PARAM_MOD].crp_p[0] & 1) == 0) -+ goto bad_domain; /* 6. modulus is odd */ -+ if (mod_bits > krp->krp_param[krp->krp_iparams].crp_nbits) -+ goto too_small; /* make sure result will fit */ -+ -+ /* 7. modulus > base */ -+ if (mod_bits < base_bits) -+ goto too_small; -+ if (mod_bits == base_bits) { -+ u_int8_t *basep, *modp; -+ int i; -+ -+ basep = krp->krp_param[SAFE_CRK_PARAM_BASE].crp_p + -+ ((base_bits + 7) / 8) - 1; -+ modp = krp->krp_param[SAFE_CRK_PARAM_MOD].crp_p + -+ ((mod_bits + 7) / 8) - 1; -+ -+ for (i = 0; i < (mod_bits + 7) / 8; i++, basep--, modp--) { -+ if (*modp < *basep) -+ goto too_small; -+ if (*modp > *basep) -+ break; -+ } -+ } -+ -+ /* And on the 9th step, he rested. */ -+ -+ WRITE_REG(sc, SAFE_PK_A_LEN, (exp_bits + 31) / 32); -+ WRITE_REG(sc, SAFE_PK_B_LEN, (mod_bits + 31) / 32); -+ if (mod_bits > 1024) { -+ op = SAFE_PK_FUNC_EXP4; -+ a_off = 0x000; -+ b_off = 0x100; -+ c_off = 0x200; -+ d_off = 0x300; -+ } else { -+ op = SAFE_PK_FUNC_EXP16; -+ a_off = 0x000; -+ b_off = 0x080; -+ c_off = 0x100; -+ d_off = 0x180; -+ } -+ sc->sc_pk_reslen = b_off - a_off; -+ sc->sc_pk_resoff = d_off; -+ -+ /* A is exponent, B is modulus, C is base, D is result */ -+ safe_kload_reg(sc, a_off, b_off - a_off, -+ &krp->krp_param[SAFE_CRK_PARAM_EXP]); -+ WRITE_REG(sc, SAFE_PK_A_ADDR, a_off >> 2); -+ safe_kload_reg(sc, b_off, b_off - a_off, -+ &krp->krp_param[SAFE_CRK_PARAM_MOD]); -+ WRITE_REG(sc, SAFE_PK_B_ADDR, b_off >> 2); -+ safe_kload_reg(sc, c_off, b_off - a_off, -+ &krp->krp_param[SAFE_CRK_PARAM_BASE]); -+ WRITE_REG(sc, SAFE_PK_C_ADDR, c_off >> 2); -+ WRITE_REG(sc, SAFE_PK_D_ADDR, d_off >> 2); -+ -+ WRITE_REG(sc, SAFE_PK_FUNC, op | SAFE_PK_FUNC_RUN); -+ -+ return (0); -+ -+too_big: -+ krp->krp_status = E2BIG; -+ return (1); -+too_small: -+ krp->krp_status = ERANGE; -+ return (1); -+bad_domain: -+ krp->krp_status = EDOM; -+ return (1); -+} -+ -+static int -+safe_ksigbits(struct safe_softc *sc, struct crparam *cr) -+{ -+ u_int plen = (cr->crp_nbits + 7) / 8; -+ int i, sig = plen * 8; -+ u_int8_t c, *p = cr->crp_p; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ for (i = plen - 1; i >= 0; i--) { -+ c = p[i]; -+ if (c != 0) { -+ while ((c & 0x80) == 0) { -+ sig--; -+ c <<= 1; -+ } -+ break; -+ } -+ sig -= 8; -+ } -+ return (sig); -+} -+ -+static void -+safe_kfeed(struct safe_softc *sc) -+{ -+ struct safe_pkq *q, *tmp; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ if (list_empty(&sc->sc_pkq) && sc->sc_pkq_cur == NULL) -+ return; -+ if (sc->sc_pkq_cur != NULL) -+ return; -+ list_for_each_entry_safe(q, tmp, &sc->sc_pkq, pkq_list) { -+ sc->sc_pkq_cur = q; -+ list_del(&q->pkq_list); -+ if (safe_kstart(sc) != 0) { -+ crypto_kdone(q->pkq_krp); -+ kfree(q); -+ sc->sc_pkq_cur = NULL; -+ } else { -+ /* op started, start polling */ -+ mod_timer(&sc->sc_pkto, jiffies + 1); -+ break; -+ } -+ } -+} -+ -+static void -+safe_kpoll(unsigned long arg) -+{ -+ struct safe_softc *sc = NULL; -+ struct safe_pkq *q; -+ struct crparam *res; -+ int i; -+ u_int32_t buf[64]; -+ unsigned long flags; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ if (arg >= SAFE_MAX_CHIPS) -+ return; -+ sc = safe_chip_idx[arg]; -+ if (!sc) { -+ DPRINTF(("%s() - bad callback\n", __FUNCTION__)); -+ return; -+ } -+ -+ spin_lock_irqsave(&sc->sc_pkmtx, flags); -+ if (sc->sc_pkq_cur == NULL) -+ goto out; -+ if (READ_REG(sc, SAFE_PK_FUNC) & SAFE_PK_FUNC_RUN) { -+ /* still running, check back later */ -+ mod_timer(&sc->sc_pkto, jiffies + 1); -+ goto out; -+ } -+ -+ q = sc->sc_pkq_cur; -+ res = &q->pkq_krp->krp_param[q->pkq_krp->krp_iparams]; -+ bzero(buf, sizeof(buf)); -+ bzero(res->crp_p, (res->crp_nbits + 7) / 8); -+ for (i = 0; i < sc->sc_pk_reslen >> 2; i++) -+ buf[i] = le32_to_cpu(READ_REG(sc, SAFE_PK_RAM_START + -+ sc->sc_pk_resoff + (i << 2))); -+ bcopy(buf, res->crp_p, (res->crp_nbits + 7) / 8); -+ /* -+ * reduce the bits that need copying if possible -+ */ -+ res->crp_nbits = min(res->crp_nbits,sc->sc_pk_reslen * 8); -+ res->crp_nbits = safe_ksigbits(sc, res); -+ -+ for (i = SAFE_PK_RAM_START; i < SAFE_PK_RAM_END; i += 4) -+ WRITE_REG(sc, i, 0); -+ -+ crypto_kdone(q->pkq_krp); -+ kfree(q); -+ sc->sc_pkq_cur = NULL; -+ -+ safe_kfeed(sc); -+out: -+ spin_unlock_irqrestore(&sc->sc_pkmtx, flags); -+} -+ -+static void -+safe_kload_reg(struct safe_softc *sc, u_int32_t off, u_int32_t len, -+ struct crparam *n) -+{ -+ u_int32_t buf[64], i; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ bzero(buf, sizeof(buf)); -+ bcopy(n->crp_p, buf, (n->crp_nbits + 7) / 8); -+ -+ for (i = 0; i < len >> 2; i++) -+ WRITE_REG(sc, SAFE_PK_RAM_START + off + (i << 2), -+ cpu_to_le32(buf[i])); -+} -+ -+#ifdef SAFE_DEBUG -+static void -+safe_dump_dmastatus(struct safe_softc *sc, const char *tag) -+{ -+ printf("%s: ENDIAN 0x%x SRC 0x%x DST 0x%x STAT 0x%x\n" -+ , tag -+ , READ_REG(sc, SAFE_DMA_ENDIAN) -+ , READ_REG(sc, SAFE_DMA_SRCADDR) -+ , READ_REG(sc, SAFE_DMA_DSTADDR) -+ , READ_REG(sc, SAFE_DMA_STAT) -+ ); -+} -+ -+static void -+safe_dump_intrstate(struct safe_softc *sc, const char *tag) -+{ -+ printf("%s: HI_CFG 0x%x HI_MASK 0x%x HI_DESC_CNT 0x%x HU_STAT 0x%x HM_STAT 0x%x\n" -+ , tag -+ , READ_REG(sc, SAFE_HI_CFG) -+ , READ_REG(sc, SAFE_HI_MASK) -+ , READ_REG(sc, SAFE_HI_DESC_CNT) -+ , READ_REG(sc, SAFE_HU_STAT) -+ , READ_REG(sc, SAFE_HM_STAT) -+ ); -+} -+ -+static void -+safe_dump_ringstate(struct safe_softc *sc, const char *tag) -+{ -+ u_int32_t estat = READ_REG(sc, SAFE_PE_ERNGSTAT); -+ -+ /* NB: assume caller has lock on ring */ -+ printf("%s: ERNGSTAT %x (next %u) back %lu front %lu\n", -+ tag, -+ estat, (estat >> SAFE_PE_ERNGSTAT_NEXT_S), -+ (unsigned long)(sc->sc_back - sc->sc_ring), -+ (unsigned long)(sc->sc_front - sc->sc_ring)); -+} -+ -+static void -+safe_dump_request(struct safe_softc *sc, const char* tag, struct safe_ringentry *re) -+{ -+ int ix, nsegs; -+ -+ ix = re - sc->sc_ring; -+ printf("%s: %p (%u): csr %x src %x dst %x sa %x len %x\n" -+ , tag -+ , re, ix -+ , re->re_desc.d_csr -+ , re->re_desc.d_src -+ , re->re_desc.d_dst -+ , re->re_desc.d_sa -+ , re->re_desc.d_len -+ ); -+ if (re->re_src.nsegs > 1) { -+ ix = (re->re_desc.d_src - sc->sc_spalloc.dma_paddr) / -+ sizeof(struct safe_pdesc); -+ for (nsegs = re->re_src.nsegs; nsegs; nsegs--) { -+ printf(" spd[%u] %p: %p size %u flags %x" -+ , ix, &sc->sc_spring[ix] -+ , (caddr_t)(uintptr_t) sc->sc_spring[ix].pd_addr -+ , sc->sc_spring[ix].pd_size -+ , sc->sc_spring[ix].pd_flags -+ ); -+ if (sc->sc_spring[ix].pd_size == 0) -+ printf(" (zero!)"); -+ printf("\n"); -+ if (++ix == SAFE_TOTAL_SPART) -+ ix = 0; -+ } -+ } -+ if (re->re_dst.nsegs > 1) { -+ ix = (re->re_desc.d_dst - sc->sc_dpalloc.dma_paddr) / -+ sizeof(struct safe_pdesc); -+ for (nsegs = re->re_dst.nsegs; nsegs; nsegs--) { -+ printf(" dpd[%u] %p: %p flags %x\n" -+ , ix, &sc->sc_dpring[ix] -+ , (caddr_t)(uintptr_t) sc->sc_dpring[ix].pd_addr -+ , sc->sc_dpring[ix].pd_flags -+ ); -+ if (++ix == SAFE_TOTAL_DPART) -+ ix = 0; -+ } -+ } -+ printf("sa: cmd0 %08x cmd1 %08x staterec %x\n", -+ re->re_sa.sa_cmd0, re->re_sa.sa_cmd1, re->re_sa.sa_staterec); -+ printf("sa: key %x %x %x %x %x %x %x %x\n" -+ , re->re_sa.sa_key[0] -+ , re->re_sa.sa_key[1] -+ , re->re_sa.sa_key[2] -+ , re->re_sa.sa_key[3] -+ , re->re_sa.sa_key[4] -+ , re->re_sa.sa_key[5] -+ , re->re_sa.sa_key[6] -+ , re->re_sa.sa_key[7] -+ ); -+ printf("sa: indigest %x %x %x %x %x\n" -+ , re->re_sa.sa_indigest[0] -+ , re->re_sa.sa_indigest[1] -+ , re->re_sa.sa_indigest[2] -+ , re->re_sa.sa_indigest[3] -+ , re->re_sa.sa_indigest[4] -+ ); -+ printf("sa: outdigest %x %x %x %x %x\n" -+ , re->re_sa.sa_outdigest[0] -+ , re->re_sa.sa_outdigest[1] -+ , re->re_sa.sa_outdigest[2] -+ , re->re_sa.sa_outdigest[3] -+ , re->re_sa.sa_outdigest[4] -+ ); -+ printf("sr: iv %x %x %x %x\n" -+ , re->re_sastate.sa_saved_iv[0] -+ , re->re_sastate.sa_saved_iv[1] -+ , re->re_sastate.sa_saved_iv[2] -+ , re->re_sastate.sa_saved_iv[3] -+ ); -+ printf("sr: hashbc %u indigest %x %x %x %x %x\n" -+ , re->re_sastate.sa_saved_hashbc -+ , re->re_sastate.sa_saved_indigest[0] -+ , re->re_sastate.sa_saved_indigest[1] -+ , re->re_sastate.sa_saved_indigest[2] -+ , re->re_sastate.sa_saved_indigest[3] -+ , re->re_sastate.sa_saved_indigest[4] -+ ); -+} -+ -+static void -+safe_dump_ring(struct safe_softc *sc, const char *tag) -+{ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&sc->sc_ringmtx, flags); -+ printf("\nSafeNet Ring State:\n"); -+ safe_dump_intrstate(sc, tag); -+ safe_dump_dmastatus(sc, tag); -+ safe_dump_ringstate(sc, tag); -+ if (sc->sc_nqchip) { -+ struct safe_ringentry *re = sc->sc_back; -+ do { -+ safe_dump_request(sc, tag, re); -+ if (++re == sc->sc_ringtop) -+ re = sc->sc_ring; -+ } while (re != sc->sc_front); -+ } -+ spin_unlock_irqrestore(&sc->sc_ringmtx, flags); -+} -+#endif /* SAFE_DEBUG */ -+ -+ -+static int safe_probe(struct pci_dev *dev, const struct pci_device_id *ent) -+{ -+ struct safe_softc *sc = NULL; -+ u32 mem_start, mem_len, cmd; -+ int i, rc, devinfo; -+ dma_addr_t raddr; -+ static int num_chips = 0; -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ if (pci_enable_device(dev) < 0) -+ return(-ENODEV); -+ -+ if (!dev->irq) { -+ printk("safe: found device with no IRQ assigned. check BIOS settings!"); -+ pci_disable_device(dev); -+ return(-ENODEV); -+ } -+ -+ if (pci_set_mwi(dev)) { -+ printk("safe: pci_set_mwi failed!"); -+ return(-ENODEV); -+ } -+ -+ sc = (struct safe_softc *) kmalloc(sizeof(*sc), GFP_KERNEL); -+ if (!sc) -+ return(-ENOMEM); -+ memset(sc, 0, sizeof(*sc)); -+ -+ softc_device_init(sc, "safe", num_chips, safe_methods); -+ -+ sc->sc_irq = -1; -+ sc->sc_cid = -1; -+ sc->sc_pcidev = dev; -+ if (num_chips < SAFE_MAX_CHIPS) { -+ safe_chip_idx[device_get_unit(sc->sc_dev)] = sc; -+ num_chips++; -+ } -+ -+ INIT_LIST_HEAD(&sc->sc_pkq); -+ spin_lock_init(&sc->sc_pkmtx); -+ -+ pci_set_drvdata(sc->sc_pcidev, sc); -+ -+ /* we read its hardware registers as memory */ -+ mem_start = pci_resource_start(sc->sc_pcidev, 0); -+ mem_len = pci_resource_len(sc->sc_pcidev, 0); -+ -+ sc->sc_base_addr = (ocf_iomem_t) ioremap(mem_start, mem_len); -+ if (!sc->sc_base_addr) { -+ device_printf(sc->sc_dev, "failed to ioremap 0x%x-0x%x\n", -+ mem_start, mem_start + mem_len - 1); -+ goto out; -+ } -+ -+ /* fix up the bus size */ -+ if (pci_set_dma_mask(sc->sc_pcidev, DMA_32BIT_MASK)) { -+ device_printf(sc->sc_dev, "No usable DMA configuration, aborting.\n"); -+ goto out; -+ } -+ if (pci_set_consistent_dma_mask(sc->sc_pcidev, DMA_32BIT_MASK)) { -+ device_printf(sc->sc_dev, "No usable consistent DMA configuration, aborting.\n"); -+ goto out; -+ } -+ -+ pci_set_master(sc->sc_pcidev); -+ -+ pci_read_config_dword(sc->sc_pcidev, PCI_COMMAND, &cmd); -+ -+ if (!(cmd & PCI_COMMAND_MEMORY)) { -+ device_printf(sc->sc_dev, "failed to enable memory mapping\n"); -+ goto out; -+ } -+ -+ if (!(cmd & PCI_COMMAND_MASTER)) { -+ device_printf(sc->sc_dev, "failed to enable bus mastering\n"); -+ goto out; -+ } -+ -+ rc = request_irq(dev->irq, safe_intr, IRQF_SHARED, "safe", sc); -+ if (rc) { -+ device_printf(sc->sc_dev, "failed to hook irq %d\n", sc->sc_irq); -+ goto out; -+ } -+ sc->sc_irq = dev->irq; -+ -+ sc->sc_chiprev = READ_REG(sc, SAFE_DEVINFO) & -+ (SAFE_DEVINFO_REV_MAJ | SAFE_DEVINFO_REV_MIN); -+ -+ /* -+ * Allocate packet engine descriptors. -+ */ -+ sc->sc_ringalloc.dma_vaddr = pci_alloc_consistent(sc->sc_pcidev, -+ SAFE_MAX_NQUEUE * sizeof (struct safe_ringentry), -+ &sc->sc_ringalloc.dma_paddr); -+ if (!sc->sc_ringalloc.dma_vaddr) { -+ device_printf(sc->sc_dev, "cannot allocate PE descriptor ring\n"); -+ goto out; -+ } -+ -+ /* -+ * Hookup the static portion of all our data structures. -+ */ -+ sc->sc_ring = (struct safe_ringentry *) sc->sc_ringalloc.dma_vaddr; -+ sc->sc_ringtop = sc->sc_ring + SAFE_MAX_NQUEUE; -+ sc->sc_front = sc->sc_ring; -+ sc->sc_back = sc->sc_ring; -+ raddr = sc->sc_ringalloc.dma_paddr; -+ bzero(sc->sc_ring, SAFE_MAX_NQUEUE * sizeof(struct safe_ringentry)); -+ for (i = 0; i < SAFE_MAX_NQUEUE; i++) { -+ struct safe_ringentry *re = &sc->sc_ring[i]; -+ -+ re->re_desc.d_sa = raddr + -+ offsetof(struct safe_ringentry, re_sa); -+ re->re_sa.sa_staterec = raddr + -+ offsetof(struct safe_ringentry, re_sastate); -+ -+ raddr += sizeof (struct safe_ringentry); -+ } -+ spin_lock_init(&sc->sc_ringmtx); -+ -+ /* -+ * Allocate scatter and gather particle descriptors. -+ */ -+ sc->sc_spalloc.dma_vaddr = pci_alloc_consistent(sc->sc_pcidev, -+ SAFE_TOTAL_SPART * sizeof (struct safe_pdesc), -+ &sc->sc_spalloc.dma_paddr); -+ if (!sc->sc_spalloc.dma_vaddr) { -+ device_printf(sc->sc_dev, "cannot allocate source particle descriptor ring\n"); -+ goto out; -+ } -+ sc->sc_spring = (struct safe_pdesc *) sc->sc_spalloc.dma_vaddr; -+ sc->sc_springtop = sc->sc_spring + SAFE_TOTAL_SPART; -+ sc->sc_spfree = sc->sc_spring; -+ bzero(sc->sc_spring, SAFE_TOTAL_SPART * sizeof(struct safe_pdesc)); -+ -+ sc->sc_dpalloc.dma_vaddr = pci_alloc_consistent(sc->sc_pcidev, -+ SAFE_TOTAL_DPART * sizeof (struct safe_pdesc), -+ &sc->sc_dpalloc.dma_paddr); -+ if (!sc->sc_dpalloc.dma_vaddr) { -+ device_printf(sc->sc_dev, "cannot allocate destination particle descriptor ring\n"); -+ goto out; -+ } -+ sc->sc_dpring = (struct safe_pdesc *) sc->sc_dpalloc.dma_vaddr; -+ sc->sc_dpringtop = sc->sc_dpring + SAFE_TOTAL_DPART; -+ sc->sc_dpfree = sc->sc_dpring; -+ bzero(sc->sc_dpring, SAFE_TOTAL_DPART * sizeof(struct safe_pdesc)); -+ -+ sc->sc_cid = crypto_get_driverid(softc_get_device(sc), CRYPTOCAP_F_HARDWARE); -+ if (sc->sc_cid < 0) { -+ device_printf(sc->sc_dev, "could not get crypto driver id\n"); -+ goto out; -+ } -+ -+ printf("%s:", device_get_nameunit(sc->sc_dev)); -+ -+ devinfo = READ_REG(sc, SAFE_DEVINFO); -+ if (devinfo & SAFE_DEVINFO_RNG) { -+ sc->sc_flags |= SAFE_FLAGS_RNG; -+ printf(" rng"); -+ } -+ if (devinfo & SAFE_DEVINFO_PKEY) { -+ printf(" key"); -+ sc->sc_flags |= SAFE_FLAGS_KEY; -+ crypto_kregister(sc->sc_cid, CRK_MOD_EXP, 0); -+#if 0 -+ crypto_kregister(sc->sc_cid, CRK_MOD_EXP_CRT, 0); -+#endif -+ init_timer(&sc->sc_pkto); -+ sc->sc_pkto.function = safe_kpoll; -+ sc->sc_pkto.data = (unsigned long) device_get_unit(sc->sc_dev); -+ } -+ if (devinfo & SAFE_DEVINFO_DES) { -+ printf(" des/3des"); -+ crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0); -+ crypto_register(sc->sc_cid, CRYPTO_DES_CBC, 0, 0); -+ } -+ if (devinfo & SAFE_DEVINFO_AES) { -+ printf(" aes"); -+ crypto_register(sc->sc_cid, CRYPTO_AES_CBC, 0, 0); -+ } -+ if (devinfo & SAFE_DEVINFO_MD5) { -+ printf(" md5"); -+ crypto_register(sc->sc_cid, CRYPTO_MD5_HMAC, 0, 0); -+ } -+ if (devinfo & SAFE_DEVINFO_SHA1) { -+ printf(" sha1"); -+ crypto_register(sc->sc_cid, CRYPTO_SHA1_HMAC, 0, 0); -+ } -+ printf(" null"); -+ crypto_register(sc->sc_cid, CRYPTO_NULL_CBC, 0, 0); -+ crypto_register(sc->sc_cid, CRYPTO_NULL_HMAC, 0, 0); -+ /* XXX other supported algorithms */ -+ printf("\n"); -+ -+ safe_reset_board(sc); /* reset h/w */ -+ safe_init_board(sc); /* init h/w */ -+ -+#if defined(CONFIG_OCF_RANDOMHARVEST) && !defined(SAFE_NO_RNG) -+ if (sc->sc_flags & SAFE_FLAGS_RNG) { -+ safe_rng_init(sc); -+ crypto_rregister(sc->sc_cid, safe_read_random, sc); -+ } -+#endif /* SAFE_NO_RNG */ -+ -+ return (0); -+ -+out: -+ if (sc->sc_cid >= 0) -+ crypto_unregister_all(sc->sc_cid); -+ if (sc->sc_irq != -1) -+ free_irq(sc->sc_irq, sc); -+ if (sc->sc_ringalloc.dma_vaddr) -+ pci_free_consistent(sc->sc_pcidev, -+ SAFE_MAX_NQUEUE * sizeof (struct safe_ringentry), -+ sc->sc_ringalloc.dma_vaddr, sc->sc_ringalloc.dma_paddr); -+ if (sc->sc_spalloc.dma_vaddr) -+ pci_free_consistent(sc->sc_pcidev, -+ SAFE_TOTAL_DPART * sizeof (struct safe_pdesc), -+ sc->sc_spalloc.dma_vaddr, sc->sc_spalloc.dma_paddr); -+ if (sc->sc_dpalloc.dma_vaddr) -+ pci_free_consistent(sc->sc_pcidev, -+ SAFE_TOTAL_DPART * sizeof (struct safe_pdesc), -+ sc->sc_dpalloc.dma_vaddr, sc->sc_dpalloc.dma_paddr); -+ kfree(sc); -+ return(-ENODEV); -+} -+ -+static void safe_remove(struct pci_dev *dev) -+{ -+ struct safe_softc *sc = pci_get_drvdata(dev); -+ -+ DPRINTF(("%s()\n", __FUNCTION__)); -+ -+ /* XXX wait/abort active ops */ -+ -+ WRITE_REG(sc, SAFE_HI_MASK, 0); /* disable interrupts */ -+ -+ del_timer_sync(&sc->sc_pkto); -+ -+ crypto_unregister_all(sc->sc_cid); -+ -+ safe_cleanchip(sc); -+ -+ if (sc->sc_irq != -1) -+ free_irq(sc->sc_irq, sc); -+ if (sc->sc_ringalloc.dma_vaddr) -+ pci_free_consistent(sc->sc_pcidev, -+ SAFE_MAX_NQUEUE * sizeof (struct safe_ringentry), -+ sc->sc_ringalloc.dma_vaddr, sc->sc_ringalloc.dma_paddr); -+ if (sc->sc_spalloc.dma_vaddr) -+ pci_free_consistent(sc->sc_pcidev, -+ SAFE_TOTAL_DPART * sizeof (struct safe_pdesc), -+ sc->sc_spalloc.dma_vaddr, sc->sc_spalloc.dma_paddr); -+ if (sc->sc_dpalloc.dma_vaddr) -+ pci_free_consistent(sc->sc_pcidev, -+ SAFE_TOTAL_DPART * sizeof (struct safe_pdesc), -+ sc->sc_dpalloc.dma_vaddr, sc->sc_dpalloc.dma_paddr); -+ sc->sc_irq = -1; -+ sc->sc_ringalloc.dma_vaddr = NULL; -+ sc->sc_spalloc.dma_vaddr = NULL; -+ sc->sc_dpalloc.dma_vaddr = NULL; -+} -+ -+static struct pci_device_id safe_pci_tbl[] = { -+ { PCI_VENDOR_SAFENET, PCI_PRODUCT_SAFEXCEL, -+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, -+ { }, -+}; -+MODULE_DEVICE_TABLE(pci, safe_pci_tbl); -+ -+static struct pci_driver safe_driver = { -+ .name = "safe", -+ .id_table = safe_pci_tbl, -+ .probe = safe_probe, -+ .remove = safe_remove, -+ /* add PM stuff here one day */ -+}; -+ -+static int __init safe_init (void) -+{ -+ struct safe_softc *sc = NULL; -+ int rc; -+ -+ DPRINTF(("%s(%p)\n", __FUNCTION__, safe_init)); -+ -+ rc = pci_register_driver(&safe_driver); -+ pci_register_driver_compat(&safe_driver, rc); -+ -+ return rc; -+} -+ -+static void __exit safe_exit (void) -+{ -+ pci_unregister_driver(&safe_driver); -+} -+ -+module_init(safe_init); -+module_exit(safe_exit); -+ -+MODULE_LICENSE("BSD"); -+MODULE_AUTHOR("David McCullough <david_mccullough@securecomputing.com>"); -+MODULE_DESCRIPTION("OCF driver for safenet PCI crypto devices"); -diff -Nur linux-2.6.30.orig/crypto/ocf/safe/safereg.h linux-2.6.30/crypto/ocf/safe/safereg.h ---- linux-2.6.30.orig/crypto/ocf/safe/safereg.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/safe/safereg.h 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,421 @@ -+/*- -+ * Copyright (c) 2003 Sam Leffler, Errno Consulting -+ * Copyright (c) 2003 Global Technology Associates, Inc. -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -+ * SUCH DAMAGE. -+ * -+ * $FreeBSD: src/sys/dev/safe/safereg.h,v 1.1 2003/07/21 21:46:07 sam Exp $ -+ */ -+#ifndef _SAFE_SAFEREG_H_ -+#define _SAFE_SAFEREG_H_ -+ -+/* -+ * Register definitions for SafeNet SafeXcel-1141 crypto device. -+ * Definitions from revision 1.3 (Nov 6 2002) of the User's Manual. -+ */ -+ -+#define BS_BAR 0x10 /* DMA base address register */ -+#define BS_TRDY_TIMEOUT 0x40 /* TRDY timeout */ -+#define BS_RETRY_TIMEOUT 0x41 /* DMA retry timeout */ -+ -+#define PCI_VENDOR_SAFENET 0x16ae /* SafeNet, Inc. */ -+ -+/* SafeNet */ -+#define PCI_PRODUCT_SAFEXCEL 0x1141 /* 1141 */ -+ -+#define SAFE_PE_CSR 0x0000 /* Packet Enginge Ctrl/Status */ -+#define SAFE_PE_SRC 0x0004 /* Packet Engine Source */ -+#define SAFE_PE_DST 0x0008 /* Packet Engine Destination */ -+#define SAFE_PE_SA 0x000c /* Packet Engine SA */ -+#define SAFE_PE_LEN 0x0010 /* Packet Engine Length */ -+#define SAFE_PE_DMACFG 0x0040 /* Packet Engine DMA Configuration */ -+#define SAFE_PE_DMASTAT 0x0044 /* Packet Engine DMA Status */ -+#define SAFE_PE_PDRBASE 0x0048 /* Packet Engine Descriptor Ring Base */ -+#define SAFE_PE_RDRBASE 0x004c /* Packet Engine Result Ring Base */ -+#define SAFE_PE_RINGCFG 0x0050 /* Packet Engine Ring Configuration */ -+#define SAFE_PE_RINGPOLL 0x0054 /* Packet Engine Ring Poll */ -+#define SAFE_PE_IRNGSTAT 0x0058 /* Packet Engine Internal Ring Status */ -+#define SAFE_PE_ERNGSTAT 0x005c /* Packet Engine External Ring Status */ -+#define SAFE_PE_IOTHRESH 0x0060 /* Packet Engine I/O Threshold */ -+#define SAFE_PE_GRNGBASE 0x0064 /* Packet Engine Gather Ring Base */ -+#define SAFE_PE_SRNGBASE 0x0068 /* Packet Engine Scatter Ring Base */ -+#define SAFE_PE_PARTSIZE 0x006c /* Packet Engine Particlar Ring Size */ -+#define SAFE_PE_PARTCFG 0x0070 /* Packet Engine Particle Ring Config */ -+#define SAFE_CRYPTO_CTRL 0x0080 /* Crypto Control */ -+#define SAFE_DEVID 0x0084 /* Device ID */ -+#define SAFE_DEVINFO 0x0088 /* Device Info */ -+#define SAFE_HU_STAT 0x00a0 /* Host Unmasked Status */ -+#define SAFE_HM_STAT 0x00a4 /* Host Masked Status (read-only) */ -+#define SAFE_HI_CLR 0x00a4 /* Host Clear Interrupt (write-only) */ -+#define SAFE_HI_MASK 0x00a8 /* Host Mask Control */ -+#define SAFE_HI_CFG 0x00ac /* Interrupt Configuration */ -+#define SAFE_HI_RD_DESCR 0x00b4 /* Force Descriptor Read */ -+#define SAFE_HI_DESC_CNT 0x00b8 /* Host Descriptor Done Count */ -+#define SAFE_DMA_ENDIAN 0x00c0 /* Master Endian Status */ -+#define SAFE_DMA_SRCADDR 0x00c4 /* DMA Source Address Status */ -+#define SAFE_DMA_DSTADDR 0x00c8 /* DMA Destination Address Status */ -+#define SAFE_DMA_STAT 0x00cc /* DMA Current Status */ -+#define SAFE_DMA_CFG 0x00d4 /* DMA Configuration/Status */ -+#define SAFE_ENDIAN 0x00e0 /* Endian Configuration */ -+#define SAFE_PK_A_ADDR 0x0800 /* Public Key A Address */ -+#define SAFE_PK_B_ADDR 0x0804 /* Public Key B Address */ -+#define SAFE_PK_C_ADDR 0x0808 /* Public Key C Address */ -+#define SAFE_PK_D_ADDR 0x080c /* Public Key D Address */ -+#define SAFE_PK_A_LEN 0x0810 /* Public Key A Length */ -+#define SAFE_PK_B_LEN 0x0814 /* Public Key B Length */ -+#define SAFE_PK_SHIFT 0x0818 /* Public Key Shift */ -+#define SAFE_PK_FUNC 0x081c /* Public Key Function */ -+#define SAFE_PK_RAM_START 0x1000 /* Public Key RAM start address */ -+#define SAFE_PK_RAM_END 0x1fff /* Public Key RAM end address */ -+ -+#define SAFE_RNG_OUT 0x0100 /* RNG Output */ -+#define SAFE_RNG_STAT 0x0104 /* RNG Status */ -+#define SAFE_RNG_CTRL 0x0108 /* RNG Control */ -+#define SAFE_RNG_A 0x010c /* RNG A */ -+#define SAFE_RNG_B 0x0110 /* RNG B */ -+#define SAFE_RNG_X_LO 0x0114 /* RNG X [31:0] */ -+#define SAFE_RNG_X_MID 0x0118 /* RNG X [63:32] */ -+#define SAFE_RNG_X_HI 0x011c /* RNG X [80:64] */ -+#define SAFE_RNG_X_CNTR 0x0120 /* RNG Counter */ -+#define SAFE_RNG_ALM_CNT 0x0124 /* RNG Alarm Count */ -+#define SAFE_RNG_CNFG 0x0128 /* RNG Configuration */ -+#define SAFE_RNG_LFSR1_LO 0x012c /* RNG LFSR1 [31:0] */ -+#define SAFE_RNG_LFSR1_HI 0x0130 /* RNG LFSR1 [47:32] */ -+#define SAFE_RNG_LFSR2_LO 0x0134 /* RNG LFSR1 [31:0] */ -+#define SAFE_RNG_LFSR2_HI 0x0138 /* RNG LFSR1 [47:32] */ -+ -+#define SAFE_PE_CSR_READY 0x00000001 /* ready for processing */ -+#define SAFE_PE_CSR_DONE 0x00000002 /* h/w completed processing */ -+#define SAFE_PE_CSR_LOADSA 0x00000004 /* load SA digests */ -+#define SAFE_PE_CSR_HASHFINAL 0x00000010 /* do hash pad & write result */ -+#define SAFE_PE_CSR_SABUSID 0x000000c0 /* bus id for SA */ -+#define SAFE_PE_CSR_SAPCI 0x00000040 /* PCI bus id for SA */ -+#define SAFE_PE_CSR_NXTHDR 0x0000ff00 /* next hdr value for IPsec */ -+#define SAFE_PE_CSR_FPAD 0x0000ff00 /* fixed pad for basic ops */ -+#define SAFE_PE_CSR_STATUS 0x00ff0000 /* operation result status */ -+#define SAFE_PE_CSR_AUTH_FAIL 0x00010000 /* ICV mismatch (inbound) */ -+#define SAFE_PE_CSR_PAD_FAIL 0x00020000 /* pad verify fail (inbound) */ -+#define SAFE_PE_CSR_SEQ_FAIL 0x00040000 /* sequence number (inbound) */ -+#define SAFE_PE_CSR_XERROR 0x00080000 /* extended error follows */ -+#define SAFE_PE_CSR_XECODE 0x00f00000 /* extended error code */ -+#define SAFE_PE_CSR_XECODE_S 20 -+#define SAFE_PE_CSR_XECODE_BADCMD 0 /* invalid command */ -+#define SAFE_PE_CSR_XECODE_BADALG 1 /* invalid algorithm */ -+#define SAFE_PE_CSR_XECODE_ALGDIS 2 /* algorithm disabled */ -+#define SAFE_PE_CSR_XECODE_ZEROLEN 3 /* zero packet length */ -+#define SAFE_PE_CSR_XECODE_DMAERR 4 /* bus DMA error */ -+#define SAFE_PE_CSR_XECODE_PIPEABORT 5 /* secondary bus DMA error */ -+#define SAFE_PE_CSR_XECODE_BADSPI 6 /* IPsec SPI mismatch */ -+#define SAFE_PE_CSR_XECODE_TIMEOUT 10 /* failsafe timeout */ -+#define SAFE_PE_CSR_PAD 0xff000000 /* ESP padding control/status */ -+#define SAFE_PE_CSR_PAD_MIN 0x00000000 /* minimum IPsec padding */ -+#define SAFE_PE_CSR_PAD_16 0x08000000 /* pad to 16-byte boundary */ -+#define SAFE_PE_CSR_PAD_32 0x10000000 /* pad to 32-byte boundary */ -+#define SAFE_PE_CSR_PAD_64 0x20000000 /* pad to 64-byte boundary */ -+#define SAFE_PE_CSR_PAD_128 0x40000000 /* pad to 128-byte boundary */ -+#define SAFE_PE_CSR_PAD_256 0x80000000 /* pad to 256-byte boundary */ -+ -+/* -+ * Check the CSR to see if the PE has returned ownership to -+ * the host. Note that before processing a descriptor this -+ * must be done followed by a check of the SAFE_PE_LEN register -+ * status bits to avoid premature processing of a descriptor -+ * on its way back to the host. -+ */ -+#define SAFE_PE_CSR_IS_DONE(_csr) \ -+ (((_csr) & (SAFE_PE_CSR_READY | SAFE_PE_CSR_DONE)) == SAFE_PE_CSR_DONE) -+ -+#define SAFE_PE_LEN_LENGTH 0x000fffff /* total length (bytes) */ -+#define SAFE_PE_LEN_READY 0x00400000 /* ready for processing */ -+#define SAFE_PE_LEN_DONE 0x00800000 /* h/w completed processing */ -+#define SAFE_PE_LEN_BYPASS 0xff000000 /* bypass offset (bytes) */ -+#define SAFE_PE_LEN_BYPASS_S 24 -+ -+#define SAFE_PE_LEN_IS_DONE(_len) \ -+ (((_len) & (SAFE_PE_LEN_READY | SAFE_PE_LEN_DONE)) == SAFE_PE_LEN_DONE) -+ -+/* NB: these apply to HU_STAT, HM_STAT, HI_CLR, and HI_MASK */ -+#define SAFE_INT_PE_CDONE 0x00000002 /* PE context done */ -+#define SAFE_INT_PE_DDONE 0x00000008 /* PE descriptor done */ -+#define SAFE_INT_PE_ERROR 0x00000010 /* PE error */ -+#define SAFE_INT_PE_ODONE 0x00000020 /* PE operation done */ -+ -+#define SAFE_HI_CFG_PULSE 0x00000001 /* use pulse interrupt */ -+#define SAFE_HI_CFG_LEVEL 0x00000000 /* use level interrupt */ -+#define SAFE_HI_CFG_AUTOCLR 0x00000002 /* auto-clear pulse interrupt */ -+ -+#define SAFE_ENDIAN_PASS 0x000000e4 /* straight pass-thru */ -+#define SAFE_ENDIAN_SWAB 0x0000001b /* swap bytes in 32-bit word */ -+ -+#define SAFE_PE_DMACFG_PERESET 0x00000001 /* reset packet engine */ -+#define SAFE_PE_DMACFG_PDRRESET 0x00000002 /* reset PDR counters/ptrs */ -+#define SAFE_PE_DMACFG_SGRESET 0x00000004 /* reset scatter/gather cache */ -+#define SAFE_PE_DMACFG_FSENA 0x00000008 /* enable failsafe reset */ -+#define SAFE_PE_DMACFG_PEMODE 0x00000100 /* packet engine mode */ -+#define SAFE_PE_DMACFG_SAPREC 0x00000200 /* SA precedes packet */ -+#define SAFE_PE_DMACFG_PKFOLL 0x00000400 /* packet follows descriptor */ -+#define SAFE_PE_DMACFG_GPRBID 0x00003000 /* gather particle ring busid */ -+#define SAFE_PE_DMACFG_GPRPCI 0x00001000 /* PCI gather particle ring */ -+#define SAFE_PE_DMACFG_SPRBID 0x0000c000 /* scatter part. ring busid */ -+#define SAFE_PE_DMACFG_SPRPCI 0x00004000 /* PCI scatter part. ring */ -+#define SAFE_PE_DMACFG_ESDESC 0x00010000 /* endian swap descriptors */ -+#define SAFE_PE_DMACFG_ESSA 0x00020000 /* endian swap SA data */ -+#define SAFE_PE_DMACFG_ESPACKET 0x00040000 /* endian swap packet data */ -+#define SAFE_PE_DMACFG_ESPDESC 0x00080000 /* endian swap particle desc. */ -+#define SAFE_PE_DMACFG_NOPDRUP 0x00100000 /* supp. PDR ownership update */ -+#define SAFE_PD_EDMACFG_PCIMODE 0x01000000 /* PCI target mode */ -+ -+#define SAFE_PE_DMASTAT_PEIDONE 0x00000001 /* PE core input done */ -+#define SAFE_PE_DMASTAT_PEODONE 0x00000002 /* PE core output done */ -+#define SAFE_PE_DMASTAT_ENCDONE 0x00000004 /* encryption done */ -+#define SAFE_PE_DMASTAT_IHDONE 0x00000008 /* inner hash done */ -+#define SAFE_PE_DMASTAT_OHDONE 0x00000010 /* outer hash (HMAC) done */ -+#define SAFE_PE_DMASTAT_PADFLT 0x00000020 /* crypto pad fault */ -+#define SAFE_PE_DMASTAT_ICVFLT 0x00000040 /* ICV fault */ -+#define SAFE_PE_DMASTAT_SPIMIS 0x00000080 /* SPI mismatch */ -+#define SAFE_PE_DMASTAT_CRYPTO 0x00000100 /* crypto engine timeout */ -+#define SAFE_PE_DMASTAT_CQACT 0x00000200 /* command queue active */ -+#define SAFE_PE_DMASTAT_IRACT 0x00000400 /* input request active */ -+#define SAFE_PE_DMASTAT_ORACT 0x00000800 /* output request active */ -+#define SAFE_PE_DMASTAT_PEISIZE 0x003ff000 /* PE input size:32-bit words */ -+#define SAFE_PE_DMASTAT_PEOSIZE 0xffc00000 /* PE out. size:32-bit words */ -+ -+#define SAFE_PE_RINGCFG_SIZE 0x000003ff /* ring size (descriptors) */ -+#define SAFE_PE_RINGCFG_OFFSET 0xffff0000 /* offset btw desc's (dwords) */ -+#define SAFE_PE_RINGCFG_OFFSET_S 16 -+ -+#define SAFE_PE_RINGPOLL_POLL 0x00000fff /* polling frequency/divisor */ -+#define SAFE_PE_RINGPOLL_RETRY 0x03ff0000 /* polling frequency/divisor */ -+#define SAFE_PE_RINGPOLL_CONT 0x80000000 /* continuously poll */ -+ -+#define SAFE_PE_IRNGSTAT_CQAVAIL 0x00000001 /* command queue available */ -+ -+#define SAFE_PE_ERNGSTAT_NEXT 0x03ff0000 /* index of next packet desc. */ -+#define SAFE_PE_ERNGSTAT_NEXT_S 16 -+ -+#define SAFE_PE_IOTHRESH_INPUT 0x000003ff /* input threshold (dwords) */ -+#define SAFE_PE_IOTHRESH_OUTPUT 0x03ff0000 /* output threshold (dwords) */ -+ -+#define SAFE_PE_PARTCFG_SIZE 0x0000ffff /* scatter particle size */ -+#define SAFE_PE_PARTCFG_GBURST 0x00030000 /* gather particle burst */ -+#define SAFE_PE_PARTCFG_GBURST_2 0x00000000 -+#define SAFE_PE_PARTCFG_GBURST_4 0x00010000 -+#define SAFE_PE_PARTCFG_GBURST_8 0x00020000 -+#define SAFE_PE_PARTCFG_GBURST_16 0x00030000 -+#define SAFE_PE_PARTCFG_SBURST 0x000c0000 /* scatter particle burst */ -+#define SAFE_PE_PARTCFG_SBURST_2 0x00000000 -+#define SAFE_PE_PARTCFG_SBURST_4 0x00040000 -+#define SAFE_PE_PARTCFG_SBURST_8 0x00080000 -+#define SAFE_PE_PARTCFG_SBURST_16 0x000c0000 -+ -+#define SAFE_PE_PARTSIZE_SCAT 0xffff0000 /* scatter particle ring size */ -+#define SAFE_PE_PARTSIZE_GATH 0x0000ffff /* gather particle ring size */ -+ -+#define SAFE_CRYPTO_CTRL_3DES 0x00000001 /* enable 3DES support */ -+#define SAFE_CRYPTO_CTRL_PKEY 0x00010000 /* enable public key support */ -+#define SAFE_CRYPTO_CTRL_RNG 0x00020000 /* enable RNG support */ -+ -+#define SAFE_DEVINFO_REV_MIN 0x0000000f /* minor rev for chip */ -+#define SAFE_DEVINFO_REV_MAJ 0x000000f0 /* major rev for chip */ -+#define SAFE_DEVINFO_REV_MAJ_S 4 -+#define SAFE_DEVINFO_DES 0x00000100 /* DES/3DES support present */ -+#define SAFE_DEVINFO_ARC4 0x00000200 /* ARC4 support present */ -+#define SAFE_DEVINFO_AES 0x00000400 /* AES support present */ -+#define SAFE_DEVINFO_MD5 0x00001000 /* MD5 support present */ -+#define SAFE_DEVINFO_SHA1 0x00002000 /* SHA-1 support present */ -+#define SAFE_DEVINFO_RIPEMD 0x00004000 /* RIPEMD support present */ -+#define SAFE_DEVINFO_DEFLATE 0x00010000 /* Deflate support present */ -+#define SAFE_DEVINFO_SARAM 0x00100000 /* on-chip SA RAM present */ -+#define SAFE_DEVINFO_EMIBUS 0x00200000 /* EMI bus present */ -+#define SAFE_DEVINFO_PKEY 0x00400000 /* public key support present */ -+#define SAFE_DEVINFO_RNG 0x00800000 /* RNG present */ -+ -+#define SAFE_REV(_maj, _min) (((_maj) << SAFE_DEVINFO_REV_MAJ_S) | (_min)) -+#define SAFE_REV_MAJ(_chiprev) \ -+ (((_chiprev) & SAFE_DEVINFO_REV_MAJ) >> SAFE_DEVINFO_REV_MAJ_S) -+#define SAFE_REV_MIN(_chiprev) ((_chiprev) & SAFE_DEVINFO_REV_MIN) -+ -+#define SAFE_PK_FUNC_MULT 0x00000001 /* Multiply function */ -+#define SAFE_PK_FUNC_SQUARE 0x00000004 /* Square function */ -+#define SAFE_PK_FUNC_ADD 0x00000010 /* Add function */ -+#define SAFE_PK_FUNC_SUB 0x00000020 /* Subtract function */ -+#define SAFE_PK_FUNC_LSHIFT 0x00000040 /* Left-shift function */ -+#define SAFE_PK_FUNC_RSHIFT 0x00000080 /* Right-shift function */ -+#define SAFE_PK_FUNC_DIV 0x00000100 /* Divide function */ -+#define SAFE_PK_FUNC_CMP 0x00000400 /* Compare function */ -+#define SAFE_PK_FUNC_COPY 0x00000800 /* Copy function */ -+#define SAFE_PK_FUNC_EXP16 0x00002000 /* Exponentiate (4-bit ACT) */ -+#define SAFE_PK_FUNC_EXP4 0x00004000 /* Exponentiate (2-bit ACT) */ -+#define SAFE_PK_FUNC_RUN 0x00008000 /* start/status */ -+ -+#define SAFE_RNG_STAT_BUSY 0x00000001 /* busy, data not valid */ -+ -+#define SAFE_RNG_CTRL_PRE_LFSR 0x00000001 /* enable output pre-LFSR */ -+#define SAFE_RNG_CTRL_TST_MODE 0x00000002 /* enable test mode */ -+#define SAFE_RNG_CTRL_TST_RUN 0x00000004 /* start test state machine */ -+#define SAFE_RNG_CTRL_ENA_RING1 0x00000008 /* test entropy oscillator #1 */ -+#define SAFE_RNG_CTRL_ENA_RING2 0x00000010 /* test entropy oscillator #2 */ -+#define SAFE_RNG_CTRL_DIS_ALARM 0x00000020 /* disable RNG alarm reports */ -+#define SAFE_RNG_CTRL_TST_CLOCK 0x00000040 /* enable test clock */ -+#define SAFE_RNG_CTRL_SHORTEN 0x00000080 /* shorten state timers */ -+#define SAFE_RNG_CTRL_TST_ALARM 0x00000100 /* simulate alarm state */ -+#define SAFE_RNG_CTRL_RST_LFSR 0x00000200 /* reset LFSR */ -+ -+/* -+ * Packet engine descriptor. Note that d_csr is a copy of the -+ * SAFE_PE_CSR register and all definitions apply, and d_len -+ * is a copy of the SAFE_PE_LEN register and all definitions apply. -+ * d_src and d_len may point directly to contiguous data or to a -+ * list of ``particle descriptors'' when using scatter/gather i/o. -+ */ -+struct safe_desc { -+ u_int32_t d_csr; /* per-packet control/status */ -+ u_int32_t d_src; /* source address */ -+ u_int32_t d_dst; /* destination address */ -+ u_int32_t d_sa; /* SA address */ -+ u_int32_t d_len; /* length, bypass, status */ -+}; -+ -+/* -+ * Scatter/Gather particle descriptor. -+ * -+ * NB: scatter descriptors do not specify a size; this is fixed -+ * by the setting of the SAFE_PE_PARTCFG register. -+ */ -+struct safe_pdesc { -+ u_int32_t pd_addr; /* particle address */ -+#ifdef __BIG_ENDIAN -+ u_int16_t pd_flags; /* control word */ -+ u_int16_t pd_size; /* particle size (bytes) */ -+#else -+ u_int16_t pd_flags; /* control word */ -+ u_int16_t pd_size; /* particle size (bytes) */ -+#endif -+}; -+ -+#define SAFE_PD_READY 0x0001 /* ready for processing */ -+#define SAFE_PD_DONE 0x0002 /* h/w completed processing */ -+ -+/* -+ * Security Association (SA) Record (Rev 1). One of these is -+ * required for each operation processed by the packet engine. -+ */ -+struct safe_sarec { -+ u_int32_t sa_cmd0; -+ u_int32_t sa_cmd1; -+ u_int32_t sa_resv0; -+ u_int32_t sa_resv1; -+ u_int32_t sa_key[8]; /* DES/3DES/AES key */ -+ u_int32_t sa_indigest[5]; /* inner digest */ -+ u_int32_t sa_outdigest[5]; /* outer digest */ -+ u_int32_t sa_spi; /* SPI */ -+ u_int32_t sa_seqnum; /* sequence number */ -+ u_int32_t sa_seqmask[2]; /* sequence number mask */ -+ u_int32_t sa_resv2; -+ u_int32_t sa_staterec; /* address of state record */ -+ u_int32_t sa_resv3[2]; -+ u_int32_t sa_samgmt0; /* SA management field 0 */ -+ u_int32_t sa_samgmt1; /* SA management field 0 */ -+}; -+ -+#define SAFE_SA_CMD0_OP 0x00000007 /* operation code */ -+#define SAFE_SA_CMD0_OP_CRYPT 0x00000000 /* encrypt/decrypt (basic) */ -+#define SAFE_SA_CMD0_OP_BOTH 0x00000001 /* encrypt-hash/hash-decrypto */ -+#define SAFE_SA_CMD0_OP_HASH 0x00000003 /* hash (outbound-only) */ -+#define SAFE_SA_CMD0_OP_ESP 0x00000000 /* ESP in/out (proto) */ -+#define SAFE_SA_CMD0_OP_AH 0x00000001 /* AH in/out (proto) */ -+#define SAFE_SA_CMD0_INBOUND 0x00000008 /* inbound operation */ -+#define SAFE_SA_CMD0_OUTBOUND 0x00000000 /* outbound operation */ -+#define SAFE_SA_CMD0_GROUP 0x00000030 /* operation group */ -+#define SAFE_SA_CMD0_BASIC 0x00000000 /* basic operation */ -+#define SAFE_SA_CMD0_PROTO 0x00000010 /* protocol/packet operation */ -+#define SAFE_SA_CMD0_BUNDLE 0x00000020 /* bundled operation (resvd) */ -+#define SAFE_SA_CMD0_PAD 0x000000c0 /* crypto pad method */ -+#define SAFE_SA_CMD0_PAD_IPSEC 0x00000000 /* IPsec padding */ -+#define SAFE_SA_CMD0_PAD_PKCS7 0x00000040 /* PKCS#7 padding */ -+#define SAFE_SA_CMD0_PAD_CONS 0x00000080 /* constant padding */ -+#define SAFE_SA_CMD0_PAD_ZERO 0x000000c0 /* zero padding */ -+#define SAFE_SA_CMD0_CRYPT_ALG 0x00000f00 /* symmetric crypto algorithm */ -+#define SAFE_SA_CMD0_DES 0x00000000 /* DES crypto algorithm */ -+#define SAFE_SA_CMD0_3DES 0x00000100 /* 3DES crypto algorithm */ -+#define SAFE_SA_CMD0_AES 0x00000300 /* AES crypto algorithm */ -+#define SAFE_SA_CMD0_CRYPT_NULL 0x00000f00 /* null crypto algorithm */ -+#define SAFE_SA_CMD0_HASH_ALG 0x0000f000 /* hash algorithm */ -+#define SAFE_SA_CMD0_MD5 0x00000000 /* MD5 hash algorithm */ -+#define SAFE_SA_CMD0_SHA1 0x00001000 /* SHA-1 hash algorithm */ -+#define SAFE_SA_CMD0_HASH_NULL 0x0000f000 /* null hash algorithm */ -+#define SAFE_SA_CMD0_HDR_PROC 0x00080000 /* header processing */ -+#define SAFE_SA_CMD0_IBUSID 0x00300000 /* input bus id */ -+#define SAFE_SA_CMD0_IPCI 0x00100000 /* PCI input bus id */ -+#define SAFE_SA_CMD0_OBUSID 0x00c00000 /* output bus id */ -+#define SAFE_SA_CMD0_OPCI 0x00400000 /* PCI output bus id */ -+#define SAFE_SA_CMD0_IVLD 0x03000000 /* IV loading */ -+#define SAFE_SA_CMD0_IVLD_NONE 0x00000000 /* IV no load (reuse) */ -+#define SAFE_SA_CMD0_IVLD_IBUF 0x01000000 /* IV load from input buffer */ -+#define SAFE_SA_CMD0_IVLD_STATE 0x02000000 /* IV load from state */ -+#define SAFE_SA_CMD0_HSLD 0x0c000000 /* hash state loading */ -+#define SAFE_SA_CMD0_HSLD_SA 0x00000000 /* hash state load from SA */ -+#define SAFE_SA_CMD0_HSLD_STATE 0x08000000 /* hash state load from state */ -+#define SAFE_SA_CMD0_HSLD_NONE 0x0c000000 /* hash state no load */ -+#define SAFE_SA_CMD0_SAVEIV 0x10000000 /* save IV */ -+#define SAFE_SA_CMD0_SAVEHASH 0x20000000 /* save hash state */ -+#define SAFE_SA_CMD0_IGATHER 0x40000000 /* input gather */ -+#define SAFE_SA_CMD0_OSCATTER 0x80000000 /* output scatter */ -+ -+#define SAFE_SA_CMD1_HDRCOPY 0x00000002 /* copy header to output */ -+#define SAFE_SA_CMD1_PAYCOPY 0x00000004 /* copy payload to output */ -+#define SAFE_SA_CMD1_PADCOPY 0x00000008 /* copy pad to output */ -+#define SAFE_SA_CMD1_IPV4 0x00000000 /* IPv4 protocol */ -+#define SAFE_SA_CMD1_IPV6 0x00000010 /* IPv6 protocol */ -+#define SAFE_SA_CMD1_MUTABLE 0x00000020 /* mutable bit processing */ -+#define SAFE_SA_CMD1_SRBUSID 0x000000c0 /* state record bus id */ -+#define SAFE_SA_CMD1_SRPCI 0x00000040 /* state record from PCI */ -+#define SAFE_SA_CMD1_CRMODE 0x00000300 /* crypto mode */ -+#define SAFE_SA_CMD1_ECB 0x00000000 /* ECB crypto mode */ -+#define SAFE_SA_CMD1_CBC 0x00000100 /* CBC crypto mode */ -+#define SAFE_SA_CMD1_OFB 0x00000200 /* OFB crypto mode */ -+#define SAFE_SA_CMD1_CFB 0x00000300 /* CFB crypto mode */ -+#define SAFE_SA_CMD1_CRFEEDBACK 0x00000c00 /* crypto feedback mode */ -+#define SAFE_SA_CMD1_64BIT 0x00000000 /* 64-bit crypto feedback */ -+#define SAFE_SA_CMD1_8BIT 0x00000400 /* 8-bit crypto feedback */ -+#define SAFE_SA_CMD1_1BIT 0x00000800 /* 1-bit crypto feedback */ -+#define SAFE_SA_CMD1_128BIT 0x00000c00 /* 128-bit crypto feedback */ -+#define SAFE_SA_CMD1_OPTIONS 0x00001000 /* HMAC/options mutable bit */ -+#define SAFE_SA_CMD1_HMAC SAFE_SA_CMD1_OPTIONS -+#define SAFE_SA_CMD1_SAREV1 0x00008000 /* SA Revision 1 */ -+#define SAFE_SA_CMD1_OFFSET 0x00ff0000 /* hash/crypto offset(dwords) */ -+#define SAFE_SA_CMD1_OFFSET_S 16 -+#define SAFE_SA_CMD1_AESKEYLEN 0x0f000000 /* AES key length */ -+#define SAFE_SA_CMD1_AES128 0x02000000 /* 128-bit AES key */ -+#define SAFE_SA_CMD1_AES192 0x03000000 /* 192-bit AES key */ -+#define SAFE_SA_CMD1_AES256 0x04000000 /* 256-bit AES key */ -+ -+/* -+ * Security Associate State Record (Rev 1). -+ */ -+struct safe_sastate { -+ u_int32_t sa_saved_iv[4]; /* saved IV (DES/3DES/AES) */ -+ u_int32_t sa_saved_hashbc; /* saved hash byte count */ -+ u_int32_t sa_saved_indigest[5]; /* saved inner digest */ -+}; -+#endif /* _SAFE_SAFEREG_H_ */ -diff -Nur linux-2.6.30.orig/crypto/ocf/safe/safevar.h linux-2.6.30/crypto/ocf/safe/safevar.h ---- linux-2.6.30.orig/crypto/ocf/safe/safevar.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/safe/safevar.h 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,230 @@ -+/*- -+ * The linux port of this code done by David McCullough -+ * Copyright (C) 2004-2007 David McCullough <david_mccullough@securecomputing.com> -+ * The license and original author are listed below. -+ * -+ * Copyright (c) 2003 Sam Leffler, Errno Consulting -+ * Copyright (c) 2003 Global Technology Associates, Inc. -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -+ * SUCH DAMAGE. -+ * -+ * $FreeBSD: src/sys/dev/safe/safevar.h,v 1.2 2006/05/17 18:34:26 pjd Exp $ -+ */ -+#ifndef _SAFE_SAFEVAR_H_ -+#define _SAFE_SAFEVAR_H_ -+ -+/* Maximum queue length */ -+#ifndef SAFE_MAX_NQUEUE -+#define SAFE_MAX_NQUEUE 60 -+#endif -+ -+#define SAFE_MAX_PART 64 /* Maximum scatter/gather depth */ -+#define SAFE_DMA_BOUNDARY 0 /* No boundary for source DMA ops */ -+#define SAFE_MAX_DSIZE 2048 /* MCLBYTES Fixed scatter particle size */ -+#define SAFE_MAX_SSIZE 0x0ffff /* Maximum gather particle size */ -+#define SAFE_MAX_DMA 0xfffff /* Maximum PE operand size (20 bits) */ -+/* total src+dst particle descriptors */ -+#define SAFE_TOTAL_DPART (SAFE_MAX_NQUEUE * SAFE_MAX_PART) -+#define SAFE_TOTAL_SPART (SAFE_MAX_NQUEUE * SAFE_MAX_PART) -+ -+#define SAFE_RNG_MAXBUFSIZ 128 /* 32-bit words */ -+ -+#define SAFE_CARD(sid) (((sid) & 0xf0000000) >> 28) -+#define SAFE_SESSION(sid) ( (sid) & 0x0fffffff) -+#define SAFE_SID(crd, sesn) (((crd) << 28) | ((sesn) & 0x0fffffff)) -+ -+#define SAFE_DEF_RTY 0xff /* PCI Retry Timeout */ -+#define SAFE_DEF_TOUT 0xff /* PCI TRDY Timeout */ -+#define SAFE_DEF_CACHELINE 0x01 /* Cache Line setting */ -+ -+#ifdef __KERNEL__ -+/* -+ * State associated with the allocation of each chunk -+ * of memory setup for DMA. -+ */ -+struct safe_dma_alloc { -+ dma_addr_t dma_paddr; -+ void *dma_vaddr; -+}; -+ -+/* -+ * Cryptographic operand state. One of these exists for each -+ * source and destination operand passed in from the crypto -+ * subsystem. When possible source and destination operands -+ * refer to the same memory. More often they are distinct. -+ * We track the virtual address of each operand as well as -+ * where each is mapped for DMA. -+ */ -+struct safe_operand { -+ union { -+ struct sk_buff *skb; -+ struct uio *io; -+ } u; -+ void *map; -+ int mapsize; /* total number of bytes in segs */ -+ struct { -+ dma_addr_t ds_addr; -+ int ds_len; -+ int ds_tlen; -+ } segs[SAFE_MAX_PART]; -+ int nsegs; -+}; -+ -+/* -+ * Packet engine ring entry and cryptographic operation state. -+ * The packet engine requires a ring of descriptors that contain -+ * pointers to various cryptographic state. However the ring -+ * configuration register allows you to specify an arbitrary size -+ * for ring entries. We use this feature to collect most of the -+ * state for each cryptographic request into one spot. Other than -+ * ring entries only the ``particle descriptors'' (scatter/gather -+ * lists) and the actual operand data are kept separate. The -+ * particle descriptors must also be organized in rings. The -+ * operand data can be located aribtrarily (modulo alignment constraints). -+ * -+ * Note that the descriptor ring is mapped onto the PCI bus so -+ * the hardware can DMA data. This means the entire ring must be -+ * contiguous. -+ */ -+struct safe_ringentry { -+ struct safe_desc re_desc; /* command descriptor */ -+ struct safe_sarec re_sa; /* SA record */ -+ struct safe_sastate re_sastate; /* SA state record */ -+ -+ struct cryptop *re_crp; /* crypto operation */ -+ -+ struct safe_operand re_src; /* source operand */ -+ struct safe_operand re_dst; /* destination operand */ -+ -+ int re_sesn; /* crypto session ID */ -+ int re_flags; -+#define SAFE_QFLAGS_COPYOUTIV 0x1 /* copy back on completion */ -+#define SAFE_QFLAGS_COPYOUTICV 0x2 /* copy back on completion */ -+}; -+ -+#define re_src_skb re_src.u.skb -+#define re_src_io re_src.u.io -+#define re_src_map re_src.map -+#define re_src_nsegs re_src.nsegs -+#define re_src_segs re_src.segs -+#define re_src_mapsize re_src.mapsize -+ -+#define re_dst_skb re_dst.u.skb -+#define re_dst_io re_dst.u.io -+#define re_dst_map re_dst.map -+#define re_dst_nsegs re_dst.nsegs -+#define re_dst_segs re_dst.segs -+#define re_dst_mapsize re_dst.mapsize -+ -+struct rndstate_test; -+ -+struct safe_session { -+ u_int32_t ses_used; -+ u_int32_t ses_klen; /* key length in bits */ -+ u_int32_t ses_key[8]; /* DES/3DES/AES key */ -+ u_int32_t ses_mlen; /* hmac length in bytes */ -+ u_int32_t ses_hminner[5]; /* hmac inner state */ -+ u_int32_t ses_hmouter[5]; /* hmac outer state */ -+ u_int32_t ses_iv[4]; /* DES/3DES/AES iv */ -+}; -+ -+struct safe_pkq { -+ struct list_head pkq_list; -+ struct cryptkop *pkq_krp; -+}; -+ -+struct safe_softc { -+ softc_device_decl sc_dev; -+ u32 sc_irq; -+ -+ struct pci_dev *sc_pcidev; -+ ocf_iomem_t sc_base_addr; -+ -+ u_int sc_chiprev; /* major/minor chip revision */ -+ int sc_flags; /* device specific flags */ -+#define SAFE_FLAGS_KEY 0x01 /* has key accelerator */ -+#define SAFE_FLAGS_RNG 0x02 /* hardware rng */ -+ int sc_suspended; -+ int sc_needwakeup; /* notify crypto layer */ -+ int32_t sc_cid; /* crypto tag */ -+ -+ struct safe_dma_alloc sc_ringalloc; /* PE ring allocation state */ -+ struct safe_ringentry *sc_ring; /* PE ring */ -+ struct safe_ringentry *sc_ringtop; /* PE ring top */ -+ struct safe_ringentry *sc_front; /* next free entry */ -+ struct safe_ringentry *sc_back; /* next pending entry */ -+ int sc_nqchip; /* # passed to chip */ -+ spinlock_t sc_ringmtx; /* PE ring lock */ -+ struct safe_pdesc *sc_spring; /* src particle ring */ -+ struct safe_pdesc *sc_springtop; /* src particle ring top */ -+ struct safe_pdesc *sc_spfree; /* next free src particle */ -+ struct safe_dma_alloc sc_spalloc; /* src particle ring state */ -+ struct safe_pdesc *sc_dpring; /* dest particle ring */ -+ struct safe_pdesc *sc_dpringtop; /* dest particle ring top */ -+ struct safe_pdesc *sc_dpfree; /* next free dest particle */ -+ struct safe_dma_alloc sc_dpalloc; /* dst particle ring state */ -+ int sc_nsessions; /* # of sessions */ -+ struct safe_session *sc_sessions; /* sessions */ -+ -+ struct timer_list sc_pkto; /* PK polling */ -+ spinlock_t sc_pkmtx; /* PK lock */ -+ struct list_head sc_pkq; /* queue of PK requests */ -+ struct safe_pkq *sc_pkq_cur; /* current processing request */ -+ u_int32_t sc_pk_reslen, sc_pk_resoff; -+ -+ int sc_max_dsize; /* maximum safe DMA size */ -+}; -+#endif /* __KERNEL__ */ -+ -+struct safe_stats { -+ u_int64_t st_ibytes; -+ u_int64_t st_obytes; -+ u_int32_t st_ipackets; -+ u_int32_t st_opackets; -+ u_int32_t st_invalid; /* invalid argument */ -+ u_int32_t st_badsession; /* invalid session id */ -+ u_int32_t st_badflags; /* flags indicate !(mbuf | uio) */ -+ u_int32_t st_nodesc; /* op submitted w/o descriptors */ -+ u_int32_t st_badalg; /* unsupported algorithm */ -+ u_int32_t st_ringfull; /* PE descriptor ring full */ -+ u_int32_t st_peoperr; /* PE marked error */ -+ u_int32_t st_dmaerr; /* PE DMA error */ -+ u_int32_t st_bypasstoobig; /* bypass > 96 bytes */ -+ u_int32_t st_skipmismatch; /* enc part begins before auth part */ -+ u_int32_t st_lenmismatch; /* enc length different auth length */ -+ u_int32_t st_coffmisaligned; /* crypto offset not 32-bit aligned */ -+ u_int32_t st_cofftoobig; /* crypto offset > 255 words */ -+ u_int32_t st_iovmisaligned; /* iov op not aligned */ -+ u_int32_t st_iovnotuniform; /* iov op not suitable */ -+ u_int32_t st_unaligned; /* unaligned src caused copy */ -+ u_int32_t st_notuniform; /* non-uniform src caused copy */ -+ u_int32_t st_nomap; /* bus_dmamap_create failed */ -+ u_int32_t st_noload; /* bus_dmamap_load_* failed */ -+ u_int32_t st_nombuf; /* MGET* failed */ -+ u_int32_t st_nomcl; /* MCLGET* failed */ -+ u_int32_t st_maxqchip; /* max mcr1 ops out for processing */ -+ u_int32_t st_rng; /* RNG requests */ -+ u_int32_t st_rngalarm; /* RNG alarm requests */ -+ u_int32_t st_noicvcopy; /* ICV data copies suppressed */ -+}; -+#endif /* _SAFE_SAFEVAR_H_ */ -diff -Nur linux-2.6.30.orig/crypto/ocf/safe/sha1.c linux-2.6.30/crypto/ocf/safe/sha1.c ---- linux-2.6.30.orig/crypto/ocf/safe/sha1.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/safe/sha1.c 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,279 @@ -+/* $KAME: sha1.c,v 1.5 2000/11/08 06:13:08 itojun Exp $ */ -+/* -+ * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. Neither the name of the project nor the names of its contributors -+ * may be used to endorse or promote products derived from this software -+ * without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND -+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE -+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -+ * SUCH DAMAGE. -+ */ -+ -+/* -+ * FIPS pub 180-1: Secure Hash Algorithm (SHA-1) -+ * based on: http://csrc.nist.gov/fips/fip180-1.txt -+ * implemented by Jun-ichiro itojun Itoh <itojun@itojun.org> -+ */ -+ -+#if 0 -+#include <sys/cdefs.h> -+__FBSDID("$FreeBSD: src/sys/crypto/sha1.c,v 1.9 2003/06/10 21:36:57 obrien Exp $"); -+ -+#include <sys/types.h> -+#include <sys/cdefs.h> -+#include <sys/time.h> -+#include <sys/systm.h> -+ -+#include <crypto/sha1.h> -+#endif -+ -+/* sanity check */ -+#if BYTE_ORDER != BIG_ENDIAN -+# if BYTE_ORDER != LITTLE_ENDIAN -+# define unsupported 1 -+# endif -+#endif -+ -+#ifndef unsupported -+ -+/* constant table */ -+static u_int32_t _K[] = { 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6 }; -+#define K(t) _K[(t) / 20] -+ -+#define F0(b, c, d) (((b) & (c)) | ((~(b)) & (d))) -+#define F1(b, c, d) (((b) ^ (c)) ^ (d)) -+#define F2(b, c, d) (((b) & (c)) | ((b) & (d)) | ((c) & (d))) -+#define F3(b, c, d) (((b) ^ (c)) ^ (d)) -+ -+#define S(n, x) (((x) << (n)) | ((x) >> (32 - n))) -+ -+#undef H -+#define H(n) (ctxt->h.b32[(n)]) -+#define COUNT (ctxt->count) -+#define BCOUNT (ctxt->c.b64[0] / 8) -+#define W(n) (ctxt->m.b32[(n)]) -+ -+#define PUTBYTE(x) { \ -+ ctxt->m.b8[(COUNT % 64)] = (x); \ -+ COUNT++; \ -+ COUNT %= 64; \ -+ ctxt->c.b64[0] += 8; \ -+ if (COUNT % 64 == 0) \ -+ sha1_step(ctxt); \ -+ } -+ -+#define PUTPAD(x) { \ -+ ctxt->m.b8[(COUNT % 64)] = (x); \ -+ COUNT++; \ -+ COUNT %= 64; \ -+ if (COUNT % 64 == 0) \ -+ sha1_step(ctxt); \ -+ } -+ -+static void sha1_step(struct sha1_ctxt *); -+ -+static void -+sha1_step(ctxt) -+ struct sha1_ctxt *ctxt; -+{ -+ u_int32_t a, b, c, d, e; -+ size_t t, s; -+ u_int32_t tmp; -+ -+#if BYTE_ORDER == LITTLE_ENDIAN -+ struct sha1_ctxt tctxt; -+ bcopy(&ctxt->m.b8[0], &tctxt.m.b8[0], 64); -+ ctxt->m.b8[0] = tctxt.m.b8[3]; ctxt->m.b8[1] = tctxt.m.b8[2]; -+ ctxt->m.b8[2] = tctxt.m.b8[1]; ctxt->m.b8[3] = tctxt.m.b8[0]; -+ ctxt->m.b8[4] = tctxt.m.b8[7]; ctxt->m.b8[5] = tctxt.m.b8[6]; -+ ctxt->m.b8[6] = tctxt.m.b8[5]; ctxt->m.b8[7] = tctxt.m.b8[4]; -+ ctxt->m.b8[8] = tctxt.m.b8[11]; ctxt->m.b8[9] = tctxt.m.b8[10]; -+ ctxt->m.b8[10] = tctxt.m.b8[9]; ctxt->m.b8[11] = tctxt.m.b8[8]; -+ ctxt->m.b8[12] = tctxt.m.b8[15]; ctxt->m.b8[13] = tctxt.m.b8[14]; -+ ctxt->m.b8[14] = tctxt.m.b8[13]; ctxt->m.b8[15] = tctxt.m.b8[12]; -+ ctxt->m.b8[16] = tctxt.m.b8[19]; ctxt->m.b8[17] = tctxt.m.b8[18]; -+ ctxt->m.b8[18] = tctxt.m.b8[17]; ctxt->m.b8[19] = tctxt.m.b8[16]; -+ ctxt->m.b8[20] = tctxt.m.b8[23]; ctxt->m.b8[21] = tctxt.m.b8[22]; -+ ctxt->m.b8[22] = tctxt.m.b8[21]; ctxt->m.b8[23] = tctxt.m.b8[20]; -+ ctxt->m.b8[24] = tctxt.m.b8[27]; ctxt->m.b8[25] = tctxt.m.b8[26]; -+ ctxt->m.b8[26] = tctxt.m.b8[25]; ctxt->m.b8[27] = tctxt.m.b8[24]; -+ ctxt->m.b8[28] = tctxt.m.b8[31]; ctxt->m.b8[29] = tctxt.m.b8[30]; -+ ctxt->m.b8[30] = tctxt.m.b8[29]; ctxt->m.b8[31] = tctxt.m.b8[28]; -+ ctxt->m.b8[32] = tctxt.m.b8[35]; ctxt->m.b8[33] = tctxt.m.b8[34]; -+ ctxt->m.b8[34] = tctxt.m.b8[33]; ctxt->m.b8[35] = tctxt.m.b8[32]; -+ ctxt->m.b8[36] = tctxt.m.b8[39]; ctxt->m.b8[37] = tctxt.m.b8[38]; -+ ctxt->m.b8[38] = tctxt.m.b8[37]; ctxt->m.b8[39] = tctxt.m.b8[36]; -+ ctxt->m.b8[40] = tctxt.m.b8[43]; ctxt->m.b8[41] = tctxt.m.b8[42]; -+ ctxt->m.b8[42] = tctxt.m.b8[41]; ctxt->m.b8[43] = tctxt.m.b8[40]; -+ ctxt->m.b8[44] = tctxt.m.b8[47]; ctxt->m.b8[45] = tctxt.m.b8[46]; -+ ctxt->m.b8[46] = tctxt.m.b8[45]; ctxt->m.b8[47] = tctxt.m.b8[44]; -+ ctxt->m.b8[48] = tctxt.m.b8[51]; ctxt->m.b8[49] = tctxt.m.b8[50]; -+ ctxt->m.b8[50] = tctxt.m.b8[49]; ctxt->m.b8[51] = tctxt.m.b8[48]; -+ ctxt->m.b8[52] = tctxt.m.b8[55]; ctxt->m.b8[53] = tctxt.m.b8[54]; -+ ctxt->m.b8[54] = tctxt.m.b8[53]; ctxt->m.b8[55] = tctxt.m.b8[52]; -+ ctxt->m.b8[56] = tctxt.m.b8[59]; ctxt->m.b8[57] = tctxt.m.b8[58]; -+ ctxt->m.b8[58] = tctxt.m.b8[57]; ctxt->m.b8[59] = tctxt.m.b8[56]; -+ ctxt->m.b8[60] = tctxt.m.b8[63]; ctxt->m.b8[61] = tctxt.m.b8[62]; -+ ctxt->m.b8[62] = tctxt.m.b8[61]; ctxt->m.b8[63] = tctxt.m.b8[60]; -+#endif -+ -+ a = H(0); b = H(1); c = H(2); d = H(3); e = H(4); -+ -+ for (t = 0; t < 20; t++) { -+ s = t & 0x0f; -+ if (t >= 16) { -+ W(s) = S(1, W((s+13) & 0x0f) ^ W((s+8) & 0x0f) ^ W((s+2) & 0x0f) ^ W(s)); -+ } -+ tmp = S(5, a) + F0(b, c, d) + e + W(s) + K(t); -+ e = d; d = c; c = S(30, b); b = a; a = tmp; -+ } -+ for (t = 20; t < 40; t++) { -+ s = t & 0x0f; -+ W(s) = S(1, W((s+13) & 0x0f) ^ W((s+8) & 0x0f) ^ W((s+2) & 0x0f) ^ W(s)); -+ tmp = S(5, a) + F1(b, c, d) + e + W(s) + K(t); -+ e = d; d = c; c = S(30, b); b = a; a = tmp; -+ } -+ for (t = 40; t < 60; t++) { -+ s = t & 0x0f; -+ W(s) = S(1, W((s+13) & 0x0f) ^ W((s+8) & 0x0f) ^ W((s+2) & 0x0f) ^ W(s)); -+ tmp = S(5, a) + F2(b, c, d) + e + W(s) + K(t); -+ e = d; d = c; c = S(30, b); b = a; a = tmp; -+ } -+ for (t = 60; t < 80; t++) { -+ s = t & 0x0f; -+ W(s) = S(1, W((s+13) & 0x0f) ^ W((s+8) & 0x0f) ^ W((s+2) & 0x0f) ^ W(s)); -+ tmp = S(5, a) + F3(b, c, d) + e + W(s) + K(t); -+ e = d; d = c; c = S(30, b); b = a; a = tmp; -+ } -+ -+ H(0) = H(0) + a; -+ H(1) = H(1) + b; -+ H(2) = H(2) + c; -+ H(3) = H(3) + d; -+ H(4) = H(4) + e; -+ -+ bzero(&ctxt->m.b8[0], 64); -+} -+ -+/*------------------------------------------------------------*/ -+ -+void -+sha1_init(ctxt) -+ struct sha1_ctxt *ctxt; -+{ -+ bzero(ctxt, sizeof(struct sha1_ctxt)); -+ H(0) = 0x67452301; -+ H(1) = 0xefcdab89; -+ H(2) = 0x98badcfe; -+ H(3) = 0x10325476; -+ H(4) = 0xc3d2e1f0; -+} -+ -+void -+sha1_pad(ctxt) -+ struct sha1_ctxt *ctxt; -+{ -+ size_t padlen; /*pad length in bytes*/ -+ size_t padstart; -+ -+ PUTPAD(0x80); -+ -+ padstart = COUNT % 64; -+ padlen = 64 - padstart; -+ if (padlen < 8) { -+ bzero(&ctxt->m.b8[padstart], padlen); -+ COUNT += padlen; -+ COUNT %= 64; -+ sha1_step(ctxt); -+ padstart = COUNT % 64; /* should be 0 */ -+ padlen = 64 - padstart; /* should be 64 */ -+ } -+ bzero(&ctxt->m.b8[padstart], padlen - 8); -+ COUNT += (padlen - 8); -+ COUNT %= 64; -+#if BYTE_ORDER == BIG_ENDIAN -+ PUTPAD(ctxt->c.b8[0]); PUTPAD(ctxt->c.b8[1]); -+ PUTPAD(ctxt->c.b8[2]); PUTPAD(ctxt->c.b8[3]); -+ PUTPAD(ctxt->c.b8[4]); PUTPAD(ctxt->c.b8[5]); -+ PUTPAD(ctxt->c.b8[6]); PUTPAD(ctxt->c.b8[7]); -+#else -+ PUTPAD(ctxt->c.b8[7]); PUTPAD(ctxt->c.b8[6]); -+ PUTPAD(ctxt->c.b8[5]); PUTPAD(ctxt->c.b8[4]); -+ PUTPAD(ctxt->c.b8[3]); PUTPAD(ctxt->c.b8[2]); -+ PUTPAD(ctxt->c.b8[1]); PUTPAD(ctxt->c.b8[0]); -+#endif -+} -+ -+void -+sha1_loop(ctxt, input, len) -+ struct sha1_ctxt *ctxt; -+ const u_int8_t *input; -+ size_t len; -+{ -+ size_t gaplen; -+ size_t gapstart; -+ size_t off; -+ size_t copysiz; -+ -+ off = 0; -+ -+ while (off < len) { -+ gapstart = COUNT % 64; -+ gaplen = 64 - gapstart; -+ -+ copysiz = (gaplen < len - off) ? gaplen : len - off; -+ bcopy(&input[off], &ctxt->m.b8[gapstart], copysiz); -+ COUNT += copysiz; -+ COUNT %= 64; -+ ctxt->c.b64[0] += copysiz * 8; -+ if (COUNT % 64 == 0) -+ sha1_step(ctxt); -+ off += copysiz; -+ } -+} -+ -+void -+sha1_result(ctxt, digest0) -+ struct sha1_ctxt *ctxt; -+ caddr_t digest0; -+{ -+ u_int8_t *digest; -+ -+ digest = (u_int8_t *)digest0; -+ sha1_pad(ctxt); -+#if BYTE_ORDER == BIG_ENDIAN -+ bcopy(&ctxt->h.b8[0], digest, 20); -+#else -+ digest[0] = ctxt->h.b8[3]; digest[1] = ctxt->h.b8[2]; -+ digest[2] = ctxt->h.b8[1]; digest[3] = ctxt->h.b8[0]; -+ digest[4] = ctxt->h.b8[7]; digest[5] = ctxt->h.b8[6]; -+ digest[6] = ctxt->h.b8[5]; digest[7] = ctxt->h.b8[4]; -+ digest[8] = ctxt->h.b8[11]; digest[9] = ctxt->h.b8[10]; -+ digest[10] = ctxt->h.b8[9]; digest[11] = ctxt->h.b8[8]; -+ digest[12] = ctxt->h.b8[15]; digest[13] = ctxt->h.b8[14]; -+ digest[14] = ctxt->h.b8[13]; digest[15] = ctxt->h.b8[12]; -+ digest[16] = ctxt->h.b8[19]; digest[17] = ctxt->h.b8[18]; -+ digest[18] = ctxt->h.b8[17]; digest[19] = ctxt->h.b8[16]; -+#endif -+} -+ -+#endif /*unsupported*/ -diff -Nur linux-2.6.30.orig/crypto/ocf/safe/sha1.h linux-2.6.30/crypto/ocf/safe/sha1.h ---- linux-2.6.30.orig/crypto/ocf/safe/sha1.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/safe/sha1.h 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,72 @@ -+/* $FreeBSD: src/sys/crypto/sha1.h,v 1.8 2002/03/20 05:13:50 alfred Exp $ */ -+/* $KAME: sha1.h,v 1.5 2000/03/27 04:36:23 sumikawa Exp $ */ -+ -+/* -+ * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. Neither the name of the project nor the names of its contributors -+ * may be used to endorse or promote products derived from this software -+ * without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND -+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE -+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -+ * SUCH DAMAGE. -+ */ -+/* -+ * FIPS pub 180-1: Secure Hash Algorithm (SHA-1) -+ * based on: http://csrc.nist.gov/fips/fip180-1.txt -+ * implemented by Jun-ichiro itojun Itoh <itojun@itojun.org> -+ */ -+ -+#ifndef _NETINET6_SHA1_H_ -+#define _NETINET6_SHA1_H_ -+ -+struct sha1_ctxt { -+ union { -+ u_int8_t b8[20]; -+ u_int32_t b32[5]; -+ } h; -+ union { -+ u_int8_t b8[8]; -+ u_int64_t b64[1]; -+ } c; -+ union { -+ u_int8_t b8[64]; -+ u_int32_t b32[16]; -+ } m; -+ u_int8_t count; -+}; -+ -+#ifdef __KERNEL__ -+extern void sha1_init(struct sha1_ctxt *); -+extern void sha1_pad(struct sha1_ctxt *); -+extern void sha1_loop(struct sha1_ctxt *, const u_int8_t *, size_t); -+extern void sha1_result(struct sha1_ctxt *, caddr_t); -+ -+/* compatibilty with other SHA1 source codes */ -+typedef struct sha1_ctxt SHA1_CTX; -+#define SHA1Init(x) sha1_init((x)) -+#define SHA1Update(x, y, z) sha1_loop((x), (y), (z)) -+#define SHA1Final(x, y) sha1_result((y), (x)) -+#endif /* __KERNEL__ */ -+ -+#define SHA1_RESULTLEN (160/8) -+ -+#endif /*_NETINET6_SHA1_H_*/ -diff -Nur linux-2.6.30.orig/crypto/ocf/talitos/Makefile linux-2.6.30/crypto/ocf/talitos/Makefile ---- linux-2.6.30.orig/crypto/ocf/talitos/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/talitos/Makefile 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,12 @@ -+# for SGlinux builds -+-include $(ROOTDIR)/modules/.config -+ -+obj-$(CONFIG_OCF_TALITOS) += talitos.o -+ -+obj ?= . -+EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/ -+ -+ifdef TOPDIR -+-include $(TOPDIR)/Rules.make -+endif -+ -diff -Nur linux-2.6.30.orig/crypto/ocf/talitos/talitos.c linux-2.6.30/crypto/ocf/talitos/talitos.c ---- linux-2.6.30.orig/crypto/ocf/talitos/talitos.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/talitos/talitos.c 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,1359 @@ -+/* -+ * crypto/ocf/talitos/talitos.c -+ * -+ * An OCF-Linux module that uses Freescale's SEC to do the crypto. -+ * Based on crypto/ocf/hifn and crypto/ocf/safe OCF drivers -+ * -+ * Copyright (c) 2006 Freescale Semiconductor, Inc. -+ * -+ * This code written by Kim A. B. Phillips <kim.phillips@freescale.com> -+ * some code copied from files with the following: -+ * Copyright (C) 2004-2007 David McCullough <david_mccullough@securecomputing.com -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The name of the author may not be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * --------------------------------------------------------------------------- -+ * -+ * NOTES: -+ * -+ * The Freescale SEC (also known as 'talitos') resides on the -+ * internal bus, and runs asynchronous to the processor core. It has -+ * a wide gamut of cryptographic acceleration features, including single- -+ * pass IPsec (also known as algorithm chaining). To properly utilize -+ * all of the SEC's performance enhancing features, further reworking -+ * of higher level code (framework, applications) will be necessary. -+ * -+ * The following table shows which SEC version is present in which devices: -+ * -+ * Devices SEC version -+ * -+ * 8272, 8248 SEC 1.0 -+ * 885, 875 SEC 1.2 -+ * 8555E, 8541E SEC 2.0 -+ * 8349E SEC 2.01 -+ * 8548E SEC 2.1 -+ * -+ * The following table shows the features offered by each SEC version: -+ * -+ * Max. chan- -+ * version Bus I/F Clock nels DEU AESU AFEU MDEU PKEU RNG KEU -+ * -+ * SEC 1.0 internal 64b 100MHz 4 1 1 1 1 1 1 0 -+ * SEC 1.2 internal 32b 66MHz 1 1 1 0 1 0 0 0 -+ * SEC 2.0 internal 64b 166MHz 4 1 1 1 1 1 1 0 -+ * SEC 2.01 internal 64b 166MHz 4 1 1 1 1 1 1 0 -+ * SEC 2.1 internal 64b 333MHz 4 1 1 1 1 1 1 1 -+ * -+ * Each execution unit in the SEC has two modes of execution; channel and -+ * slave/debug. This driver employs the channel infrastructure in the -+ * device for convenience. Only the RNG is directly accessed due to the -+ * convenience of its random fifo pool. The relationship between the -+ * channels and execution units is depicted in the following diagram: -+ * -+ * ------- ------------ -+ * ---| ch0 |---| | -+ * ------- | | -+ * | |------+-------+-------+-------+------------ -+ * ------- | | | | | | | -+ * ---| ch1 |---| | | | | | | -+ * ------- | | ------ ------ ------ ------ ------ -+ * |controller| |DEU | |AESU| |MDEU| |PKEU| ... |RNG | -+ * ------- | | ------ ------ ------ ------ ------ -+ * ---| ch2 |---| | | | | | | -+ * ------- | | | | | | | -+ * | |------+-------+-------+-------+------------ -+ * ------- | | -+ * ---| ch3 |---| | -+ * ------- ------------ -+ * -+ * Channel ch0 may drive an aes operation to the aes unit (AESU), -+ * and, at the same time, ch1 may drive a message digest operation -+ * to the mdeu. Each channel has an input descriptor FIFO, and the -+ * FIFO can contain, e.g. on the 8541E, up to 24 entries, before a -+ * a buffer overrun error is triggered. The controller is responsible -+ * for fetching the data from descriptor pointers, and passing the -+ * data to the appropriate EUs. The controller also writes the -+ * cryptographic operation's result to memory. The SEC notifies -+ * completion by triggering an interrupt and/or setting the 1st byte -+ * of the hdr field to 0xff. -+ * -+ * TODO: -+ * o support more algorithms -+ * o support more versions of the SEC -+ * o add support for linux 2.4 -+ * o scatter-gather (sg) support -+ * o add support for public key ops (PKEU) -+ * o add statistics -+ */ -+ -+#ifndef AUTOCONF_INCLUDED -+#include <linux/config.h> -+#endif -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/interrupt.h> -+#include <linux/spinlock.h> -+#include <linux/random.h> -+#include <linux/skbuff.h> -+#include <asm/scatterlist.h> -+#include <linux/dma-mapping.h> /* dma_map_single() */ -+#include <linux/moduleparam.h> -+ -+#include <linux/version.h> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15) -+#include <linux/platform_device.h> -+#endif -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) -+#include <linux/of_platform.h> -+#endif -+ -+#include <cryptodev.h> -+#include <uio.h> -+ -+#define DRV_NAME "talitos" -+ -+#include "talitos_dev.h" -+#include "talitos_soft.h" -+ -+#define read_random(p,l) get_random_bytes(p,l) -+ -+const char talitos_driver_name[] = "Talitos OCF"; -+const char talitos_driver_version[] = "0.2"; -+ -+static int talitos_newsession(device_t dev, u_int32_t *sidp, -+ struct cryptoini *cri); -+static int talitos_freesession(device_t dev, u_int64_t tid); -+static int talitos_process(device_t dev, struct cryptop *crp, int hint); -+static void dump_talitos_status(struct talitos_softc *sc); -+static int talitos_submit(struct talitos_softc *sc, struct talitos_desc *td, -+ int chsel); -+static void talitos_doneprocessing(struct talitos_softc *sc); -+static void talitos_init_device(struct talitos_softc *sc); -+static void talitos_reset_device_master(struct talitos_softc *sc); -+static void talitos_reset_device(struct talitos_softc *sc); -+static void talitos_errorprocessing(struct talitos_softc *sc); -+#ifdef CONFIG_PPC_MERGE -+static int talitos_probe(struct of_device *ofdev, const struct of_device_id *match); -+static int talitos_remove(struct of_device *ofdev); -+#else -+static int talitos_probe(struct platform_device *pdev); -+static int talitos_remove(struct platform_device *pdev); -+#endif -+#ifdef CONFIG_OCF_RANDOMHARVEST -+static int talitos_read_random(void *arg, u_int32_t *buf, int maxwords); -+static void talitos_rng_init(struct talitos_softc *sc); -+#endif -+ -+static device_method_t talitos_methods = { -+ /* crypto device methods */ -+ DEVMETHOD(cryptodev_newsession, talitos_newsession), -+ DEVMETHOD(cryptodev_freesession,talitos_freesession), -+ DEVMETHOD(cryptodev_process, talitos_process), -+}; -+ -+#define debug talitos_debug -+int talitos_debug = 0; -+module_param(talitos_debug, int, 0644); -+MODULE_PARM_DESC(talitos_debug, "Enable debug"); -+ -+static inline void talitos_write(volatile unsigned *addr, u32 val) -+{ -+ out_be32(addr, val); -+} -+ -+static inline u32 talitos_read(volatile unsigned *addr) -+{ -+ u32 val; -+ val = in_be32(addr); -+ return val; -+} -+ -+static void dump_talitos_status(struct talitos_softc *sc) -+{ -+ unsigned int v, v_hi, i, *ptr; -+ v = talitos_read(sc->sc_base_addr + TALITOS_MCR); -+ v_hi = talitos_read(sc->sc_base_addr + TALITOS_MCR_HI); -+ printk(KERN_INFO "%s: MCR 0x%08x_%08x\n", -+ device_get_nameunit(sc->sc_cdev), v, v_hi); -+ v = talitos_read(sc->sc_base_addr + TALITOS_IMR); -+ v_hi = talitos_read(sc->sc_base_addr + TALITOS_IMR_HI); -+ printk(KERN_INFO "%s: IMR 0x%08x_%08x\n", -+ device_get_nameunit(sc->sc_cdev), v, v_hi); -+ v = talitos_read(sc->sc_base_addr + TALITOS_ISR); -+ v_hi = talitos_read(sc->sc_base_addr + TALITOS_ISR_HI); -+ printk(KERN_INFO "%s: ISR 0x%08x_%08x\n", -+ device_get_nameunit(sc->sc_cdev), v, v_hi); -+ for (i = 0; i < sc->sc_num_channels; i++) { -+ v = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET + -+ TALITOS_CH_CDPR); -+ v_hi = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET + -+ TALITOS_CH_CDPR_HI); -+ printk(KERN_INFO "%s: CDPR ch%d 0x%08x_%08x\n", -+ device_get_nameunit(sc->sc_cdev), i, v, v_hi); -+ } -+ for (i = 0; i < sc->sc_num_channels; i++) { -+ v = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET + -+ TALITOS_CH_CCPSR); -+ v_hi = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET + -+ TALITOS_CH_CCPSR_HI); -+ printk(KERN_INFO "%s: CCPSR ch%d 0x%08x_%08x\n", -+ device_get_nameunit(sc->sc_cdev), i, v, v_hi); -+ } -+ ptr = sc->sc_base_addr + TALITOS_CH_DESCBUF; -+ for (i = 0; i < 16; i++) { -+ v = talitos_read(ptr++); v_hi = talitos_read(ptr++); -+ printk(KERN_INFO "%s: DESCBUF ch0 0x%08x_%08x (tdp%02d)\n", -+ device_get_nameunit(sc->sc_cdev), v, v_hi, i); -+ } -+ return; -+} -+ -+ -+#ifdef CONFIG_OCF_RANDOMHARVEST -+/* -+ * pull random numbers off the RNG FIFO, not exceeding amount available -+ */ -+static int -+talitos_read_random(void *arg, u_int32_t *buf, int maxwords) -+{ -+ struct talitos_softc *sc = (struct talitos_softc *) arg; -+ int rc; -+ u_int32_t v; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ /* check for things like FIFO underflow */ -+ v = talitos_read(sc->sc_base_addr + TALITOS_RNGISR_HI); -+ if (unlikely(v)) { -+ printk(KERN_ERR "%s: RNGISR_HI error %08x\n", -+ device_get_nameunit(sc->sc_cdev), v); -+ return 0; -+ } -+ /* -+ * OFL is number of available 64-bit words, -+ * shift and convert to a 32-bit word count -+ */ -+ v = talitos_read(sc->sc_base_addr + TALITOS_RNGSR_HI); -+ v = (v & TALITOS_RNGSR_HI_OFL) >> (16 - 1); -+ if (maxwords > v) -+ maxwords = v; -+ for (rc = 0; rc < maxwords; rc++) { -+ buf[rc] = talitos_read(sc->sc_base_addr + -+ TALITOS_RNG_FIFO + rc*sizeof(u_int32_t)); -+ } -+ if (maxwords & 1) { -+ /* -+ * RNG will complain with an AE in the RNGISR -+ * if we don't complete the pairs of 32-bit reads -+ * to its 64-bit register based FIFO -+ */ -+ v = talitos_read(sc->sc_base_addr + -+ TALITOS_RNG_FIFO + rc*sizeof(u_int32_t)); -+ } -+ -+ return rc; -+} -+ -+static void -+talitos_rng_init(struct talitos_softc *sc) -+{ -+ u_int32_t v; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ /* reset RNG EU */ -+ v = talitos_read(sc->sc_base_addr + TALITOS_RNGRCR_HI); -+ v |= TALITOS_RNGRCR_HI_SR; -+ talitos_write(sc->sc_base_addr + TALITOS_RNGRCR_HI, v); -+ while ((talitos_read(sc->sc_base_addr + TALITOS_RNGSR_HI) -+ & TALITOS_RNGSR_HI_RD) == 0) -+ cpu_relax(); -+ /* -+ * we tell the RNG to start filling the RNG FIFO -+ * by writing the RNGDSR -+ */ -+ v = talitos_read(sc->sc_base_addr + TALITOS_RNGDSR_HI); -+ talitos_write(sc->sc_base_addr + TALITOS_RNGDSR_HI, v); -+ /* -+ * 64 bits of data will be pushed onto the FIFO every -+ * 256 SEC cycles until the FIFO is full. The RNG then -+ * attempts to keep the FIFO full. -+ */ -+ v = talitos_read(sc->sc_base_addr + TALITOS_RNGISR_HI); -+ if (v) { -+ printk(KERN_ERR "%s: RNGISR_HI error %08x\n", -+ device_get_nameunit(sc->sc_cdev), v); -+ return; -+ } -+ /* -+ * n.b. we need to add a FIPS test here - if the RNG is going -+ * to fail, it's going to fail at reset time -+ */ -+ return; -+} -+#endif /* CONFIG_OCF_RANDOMHARVEST */ -+ -+/* -+ * Generate a new software session. -+ */ -+static int -+talitos_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri) -+{ -+ struct cryptoini *c, *encini = NULL, *macini = NULL; -+ struct talitos_softc *sc = device_get_softc(dev); -+ struct talitos_session *ses = NULL; -+ int sesn; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ if (sidp == NULL || cri == NULL || sc == NULL) { -+ DPRINTF("%s,%d - EINVAL\n", __FILE__, __LINE__); -+ return EINVAL; -+ } -+ for (c = cri; c != NULL; c = c->cri_next) { -+ if (c->cri_alg == CRYPTO_MD5 || -+ c->cri_alg == CRYPTO_MD5_HMAC || -+ c->cri_alg == CRYPTO_SHA1 || -+ c->cri_alg == CRYPTO_SHA1_HMAC || -+ c->cri_alg == CRYPTO_NULL_HMAC) { -+ if (macini) -+ return EINVAL; -+ macini = c; -+ } else if (c->cri_alg == CRYPTO_DES_CBC || -+ c->cri_alg == CRYPTO_3DES_CBC || -+ c->cri_alg == CRYPTO_AES_CBC || -+ c->cri_alg == CRYPTO_NULL_CBC) { -+ if (encini) -+ return EINVAL; -+ encini = c; -+ } else { -+ DPRINTF("UNKNOWN c->cri_alg %d\n", encini->cri_alg); -+ return EINVAL; -+ } -+ } -+ if (encini == NULL && macini == NULL) -+ return EINVAL; -+ if (encini) { -+ /* validate key length */ -+ switch (encini->cri_alg) { -+ case CRYPTO_DES_CBC: -+ if (encini->cri_klen != 64) -+ return EINVAL; -+ break; -+ case CRYPTO_3DES_CBC: -+ if (encini->cri_klen != 192) { -+ return EINVAL; -+ } -+ break; -+ case CRYPTO_AES_CBC: -+ if (encini->cri_klen != 128 && -+ encini->cri_klen != 192 && -+ encini->cri_klen != 256) -+ return EINVAL; -+ break; -+ default: -+ DPRINTF("UNKNOWN encini->cri_alg %d\n", -+ encini->cri_alg); -+ return EINVAL; -+ } -+ } -+ -+ if (sc->sc_sessions == NULL) { -+ ses = sc->sc_sessions = (struct talitos_session *) -+ kmalloc(sizeof(struct talitos_session), SLAB_ATOMIC); -+ if (ses == NULL) -+ return ENOMEM; -+ memset(ses, 0, sizeof(struct talitos_session)); -+ sesn = 0; -+ sc->sc_nsessions = 1; -+ } else { -+ for (sesn = 0; sesn < sc->sc_nsessions; sesn++) { -+ if (sc->sc_sessions[sesn].ses_used == 0) { -+ ses = &sc->sc_sessions[sesn]; -+ break; -+ } -+ } -+ -+ if (ses == NULL) { -+ /* allocating session */ -+ sesn = sc->sc_nsessions; -+ ses = (struct talitos_session *) kmalloc( -+ (sesn + 1) * sizeof(struct talitos_session), -+ SLAB_ATOMIC); -+ if (ses == NULL) -+ return ENOMEM; -+ memset(ses, 0, -+ (sesn + 1) * sizeof(struct talitos_session)); -+ memcpy(ses, sc->sc_sessions, -+ sesn * sizeof(struct talitos_session)); -+ memset(sc->sc_sessions, 0, -+ sesn * sizeof(struct talitos_session)); -+ kfree(sc->sc_sessions); -+ sc->sc_sessions = ses; -+ ses = &sc->sc_sessions[sesn]; -+ sc->sc_nsessions++; -+ } -+ } -+ -+ ses->ses_used = 1; -+ -+ if (encini) { -+ /* get an IV */ -+ /* XXX may read fewer than requested */ -+ read_random(ses->ses_iv, sizeof(ses->ses_iv)); -+ -+ ses->ses_klen = (encini->cri_klen + 7) / 8; -+ memcpy(ses->ses_key, encini->cri_key, ses->ses_klen); -+ if (macini) { -+ /* doing hash on top of cipher */ -+ ses->ses_hmac_len = (macini->cri_klen + 7) / 8; -+ memcpy(ses->ses_hmac, macini->cri_key, -+ ses->ses_hmac_len); -+ } -+ } else if (macini) { -+ /* doing hash */ -+ ses->ses_klen = (macini->cri_klen + 7) / 8; -+ memcpy(ses->ses_key, macini->cri_key, ses->ses_klen); -+ } -+ -+ /* back compat way of determining MSC result len */ -+ if (macini) { -+ ses->ses_mlen = macini->cri_mlen; -+ if (ses->ses_mlen == 0) { -+ if (macini->cri_alg == CRYPTO_MD5_HMAC) -+ ses->ses_mlen = MD5_HASH_LEN; -+ else -+ ses->ses_mlen = SHA1_HASH_LEN; -+ } -+ } -+ -+ /* really should make up a template td here, -+ * and only fill things like i/o and direction in process() */ -+ -+ /* assign session ID */ -+ *sidp = TALITOS_SID(sc->sc_num, sesn); -+ return 0; -+} -+ -+/* -+ * Deallocate a session. -+ */ -+static int -+talitos_freesession(device_t dev, u_int64_t tid) -+{ -+ struct talitos_softc *sc = device_get_softc(dev); -+ int session, ret; -+ u_int32_t sid = ((u_int32_t) tid) & 0xffffffff; -+ -+ if (sc == NULL) -+ return EINVAL; -+ session = TALITOS_SESSION(sid); -+ if (session < sc->sc_nsessions) { -+ memset(&sc->sc_sessions[session], 0, -+ sizeof(sc->sc_sessions[session])); -+ ret = 0; -+ } else -+ ret = EINVAL; -+ return ret; -+} -+ -+/* -+ * launch device processing - it will come back with done notification -+ * in the form of an interrupt and/or HDR_DONE_BITS in header -+ */ -+static int -+talitos_submit( -+ struct talitos_softc *sc, -+ struct talitos_desc *td, -+ int chsel) -+{ -+ u_int32_t v; -+ -+ v = dma_map_single(NULL, td, sizeof(*td), DMA_TO_DEVICE); -+ talitos_write(sc->sc_base_addr + -+ chsel*TALITOS_CH_OFFSET + TALITOS_CH_FF, 0); -+ talitos_write(sc->sc_base_addr + -+ chsel*TALITOS_CH_OFFSET + TALITOS_CH_FF_HI, v); -+ return 0; -+} -+ -+static int -+talitos_process(device_t dev, struct cryptop *crp, int hint) -+{ -+ int i, err = 0, ivsize; -+ struct talitos_softc *sc = device_get_softc(dev); -+ struct cryptodesc *crd1, *crd2, *maccrd, *enccrd; -+ caddr_t iv; -+ struct talitos_session *ses; -+ struct talitos_desc *td; -+ unsigned long flags; -+ /* descriptor mappings */ -+ int hmac_key, hmac_data, cipher_iv, cipher_key, -+ in_fifo, out_fifo, cipher_iv_out; -+ static int chsel = -1; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ if (crp == NULL || crp->crp_callback == NULL || sc == NULL) { -+ return EINVAL; -+ } -+ crp->crp_etype = 0; -+ if (TALITOS_SESSION(crp->crp_sid) >= sc->sc_nsessions) { -+ return EINVAL; -+ } -+ -+ ses = &sc->sc_sessions[TALITOS_SESSION(crp->crp_sid)]; -+ -+ /* enter the channel scheduler */ -+ spin_lock_irqsave(&sc->sc_chnfifolock[sc->sc_num_channels], flags); -+ -+ /* reuse channel that already had/has requests for the required EU */ -+ for (i = 0; i < sc->sc_num_channels; i++) { -+ if (sc->sc_chnlastalg[i] == crp->crp_desc->crd_alg) -+ break; -+ } -+ if (i == sc->sc_num_channels) { -+ /* -+ * haven't seen this algo the last sc_num_channels or more -+ * use round robin in this case -+ * nb: sc->sc_num_channels must be power of 2 -+ */ -+ chsel = (chsel + 1) & (sc->sc_num_channels - 1); -+ } else { -+ /* -+ * matches channel with same target execution unit; -+ * use same channel in this case -+ */ -+ chsel = i; -+ } -+ sc->sc_chnlastalg[chsel] = crp->crp_desc->crd_alg; -+ -+ /* release the channel scheduler lock */ -+ spin_unlock_irqrestore(&sc->sc_chnfifolock[sc->sc_num_channels], flags); -+ -+ /* acquire the selected channel fifo lock */ -+ spin_lock_irqsave(&sc->sc_chnfifolock[chsel], flags); -+ -+ /* find and reserve next available descriptor-cryptop pair */ -+ for (i = 0; i < sc->sc_chfifo_len; i++) { -+ if (sc->sc_chnfifo[chsel][i].cf_desc.hdr == 0) { -+ /* -+ * ensure correct descriptor formation by -+ * avoiding inadvertently setting "optional" entries -+ * e.g. not using "optional" dptr2 for MD/HMAC descs -+ */ -+ memset(&sc->sc_chnfifo[chsel][i].cf_desc, -+ 0, sizeof(*td)); -+ /* reserve it with done notification request bit */ -+ sc->sc_chnfifo[chsel][i].cf_desc.hdr |= -+ TALITOS_DONE_NOTIFY; -+ break; -+ } -+ } -+ spin_unlock_irqrestore(&sc->sc_chnfifolock[chsel], flags); -+ -+ if (i == sc->sc_chfifo_len) { -+ /* fifo full */ -+ err = ERESTART; -+ goto errout; -+ } -+ -+ td = &sc->sc_chnfifo[chsel][i].cf_desc; -+ sc->sc_chnfifo[chsel][i].cf_crp = crp; -+ -+ crd1 = crp->crp_desc; -+ if (crd1 == NULL) { -+ err = EINVAL; -+ goto errout; -+ } -+ crd2 = crd1->crd_next; -+ /* prevent compiler warning */ -+ hmac_key = 0; -+ hmac_data = 0; -+ if (crd2 == NULL) { -+ td->hdr |= TD_TYPE_COMMON_NONSNOOP_NO_AFEU; -+ /* assign descriptor dword ptr mappings for this desc. type */ -+ cipher_iv = 1; -+ cipher_key = 2; -+ in_fifo = 3; -+ cipher_iv_out = 5; -+ if (crd1->crd_alg == CRYPTO_MD5_HMAC || -+ crd1->crd_alg == CRYPTO_SHA1_HMAC || -+ crd1->crd_alg == CRYPTO_SHA1 || -+ crd1->crd_alg == CRYPTO_MD5) { -+ out_fifo = 5; -+ maccrd = crd1; -+ enccrd = NULL; -+ } else if (crd1->crd_alg == CRYPTO_DES_CBC || -+ crd1->crd_alg == CRYPTO_3DES_CBC || -+ crd1->crd_alg == CRYPTO_AES_CBC || -+ crd1->crd_alg == CRYPTO_ARC4) { -+ out_fifo = 4; -+ maccrd = NULL; -+ enccrd = crd1; -+ } else { -+ DPRINTF("UNKNOWN crd1->crd_alg %d\n", crd1->crd_alg); -+ err = EINVAL; -+ goto errout; -+ } -+ } else { -+ if (sc->sc_desc_types & TALITOS_HAS_DT_IPSEC_ESP) { -+ td->hdr |= TD_TYPE_IPSEC_ESP; -+ } else { -+ DPRINTF("unimplemented: multiple descriptor ipsec\n"); -+ err = EINVAL; -+ goto errout; -+ } -+ /* assign descriptor dword ptr mappings for this desc. type */ -+ hmac_key = 0; -+ hmac_data = 1; -+ cipher_iv = 2; -+ cipher_key = 3; -+ in_fifo = 4; -+ out_fifo = 5; -+ cipher_iv_out = 6; -+ if ((crd1->crd_alg == CRYPTO_MD5_HMAC || -+ crd1->crd_alg == CRYPTO_SHA1_HMAC || -+ crd1->crd_alg == CRYPTO_MD5 || -+ crd1->crd_alg == CRYPTO_SHA1) && -+ (crd2->crd_alg == CRYPTO_DES_CBC || -+ crd2->crd_alg == CRYPTO_3DES_CBC || -+ crd2->crd_alg == CRYPTO_AES_CBC || -+ crd2->crd_alg == CRYPTO_ARC4) && -+ ((crd2->crd_flags & CRD_F_ENCRYPT) == 0)) { -+ maccrd = crd1; -+ enccrd = crd2; -+ } else if ((crd1->crd_alg == CRYPTO_DES_CBC || -+ crd1->crd_alg == CRYPTO_ARC4 || -+ crd1->crd_alg == CRYPTO_3DES_CBC || -+ crd1->crd_alg == CRYPTO_AES_CBC) && -+ (crd2->crd_alg == CRYPTO_MD5_HMAC || -+ crd2->crd_alg == CRYPTO_SHA1_HMAC || -+ crd2->crd_alg == CRYPTO_MD5 || -+ crd2->crd_alg == CRYPTO_SHA1) && -+ (crd1->crd_flags & CRD_F_ENCRYPT)) { -+ enccrd = crd1; -+ maccrd = crd2; -+ } else { -+ /* We cannot order the SEC as requested */ -+ printk("%s: cannot do the order\n", -+ device_get_nameunit(sc->sc_cdev)); -+ err = EINVAL; -+ goto errout; -+ } -+ } -+ /* assign in_fifo and out_fifo based on input/output struct type */ -+ if (crp->crp_flags & CRYPTO_F_SKBUF) { -+ /* using SKB buffers */ -+ struct sk_buff *skb = (struct sk_buff *)crp->crp_buf; -+ if (skb_shinfo(skb)->nr_frags) { -+ printk("%s: skb frags unimplemented\n", -+ device_get_nameunit(sc->sc_cdev)); -+ err = EINVAL; -+ goto errout; -+ } -+ td->ptr[in_fifo].ptr = dma_map_single(NULL, skb->data, -+ skb->len, DMA_TO_DEVICE); -+ td->ptr[in_fifo].len = skb->len; -+ td->ptr[out_fifo].ptr = dma_map_single(NULL, skb->data, -+ skb->len, DMA_TO_DEVICE); -+ td->ptr[out_fifo].len = skb->len; -+ td->ptr[hmac_data].ptr = dma_map_single(NULL, skb->data, -+ skb->len, DMA_TO_DEVICE); -+ } else if (crp->crp_flags & CRYPTO_F_IOV) { -+ /* using IOV buffers */ -+ struct uio *uiop = (struct uio *)crp->crp_buf; -+ if (uiop->uio_iovcnt > 1) { -+ printk("%s: iov frags unimplemented\n", -+ device_get_nameunit(sc->sc_cdev)); -+ err = EINVAL; -+ goto errout; -+ } -+ td->ptr[in_fifo].ptr = dma_map_single(NULL, -+ uiop->uio_iov->iov_base, crp->crp_ilen, DMA_TO_DEVICE); -+ td->ptr[in_fifo].len = crp->crp_ilen; -+ /* crp_olen is never set; always use crp_ilen */ -+ td->ptr[out_fifo].ptr = dma_map_single(NULL, -+ uiop->uio_iov->iov_base, -+ crp->crp_ilen, DMA_TO_DEVICE); -+ td->ptr[out_fifo].len = crp->crp_ilen; -+ } else { -+ /* using contig buffers */ -+ td->ptr[in_fifo].ptr = dma_map_single(NULL, -+ crp->crp_buf, crp->crp_ilen, DMA_TO_DEVICE); -+ td->ptr[in_fifo].len = crp->crp_ilen; -+ td->ptr[out_fifo].ptr = dma_map_single(NULL, -+ crp->crp_buf, crp->crp_ilen, DMA_TO_DEVICE); -+ td->ptr[out_fifo].len = crp->crp_ilen; -+ } -+ if (enccrd) { -+ switch (enccrd->crd_alg) { -+ case CRYPTO_3DES_CBC: -+ td->hdr |= TALITOS_MODE0_DEU_3DES; -+ /* FALLTHROUGH */ -+ case CRYPTO_DES_CBC: -+ td->hdr |= TALITOS_SEL0_DEU -+ | TALITOS_MODE0_DEU_CBC; -+ if (enccrd->crd_flags & CRD_F_ENCRYPT) -+ td->hdr |= TALITOS_MODE0_DEU_ENC; -+ ivsize = 2*sizeof(u_int32_t); -+ DPRINTF("%cDES ses %d ch %d len %d\n", -+ (td->hdr & TALITOS_MODE0_DEU_3DES)?'3':'1', -+ (u32)TALITOS_SESSION(crp->crp_sid), -+ chsel, td->ptr[in_fifo].len); -+ break; -+ case CRYPTO_AES_CBC: -+ td->hdr |= TALITOS_SEL0_AESU -+ | TALITOS_MODE0_AESU_CBC; -+ if (enccrd->crd_flags & CRD_F_ENCRYPT) -+ td->hdr |= TALITOS_MODE0_AESU_ENC; -+ ivsize = 4*sizeof(u_int32_t); -+ DPRINTF("AES ses %d ch %d len %d\n", -+ (u32)TALITOS_SESSION(crp->crp_sid), -+ chsel, td->ptr[in_fifo].len); -+ break; -+ default: -+ printk("%s: unimplemented enccrd->crd_alg %d\n", -+ device_get_nameunit(sc->sc_cdev), enccrd->crd_alg); -+ err = EINVAL; -+ goto errout; -+ } -+ /* -+ * Setup encrypt/decrypt state. When using basic ops -+ * we can't use an inline IV because hash/crypt offset -+ * must be from the end of the IV to the start of the -+ * crypt data and this leaves out the preceding header -+ * from the hash calculation. Instead we place the IV -+ * in the state record and set the hash/crypt offset to -+ * copy both the header+IV. -+ */ -+ if (enccrd->crd_flags & CRD_F_ENCRYPT) { -+ td->hdr |= TALITOS_DIR_OUTBOUND; -+ if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) -+ iv = enccrd->crd_iv; -+ else -+ iv = (caddr_t) ses->ses_iv; -+ if ((enccrd->crd_flags & CRD_F_IV_PRESENT) == 0) { -+ crypto_copyback(crp->crp_flags, crp->crp_buf, -+ enccrd->crd_inject, ivsize, iv); -+ } -+ } else { -+ td->hdr |= TALITOS_DIR_INBOUND; -+ if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) { -+ iv = enccrd->crd_iv; -+ bcopy(enccrd->crd_iv, iv, ivsize); -+ } else { -+ iv = (caddr_t) ses->ses_iv; -+ crypto_copydata(crp->crp_flags, crp->crp_buf, -+ enccrd->crd_inject, ivsize, iv); -+ } -+ } -+ td->ptr[cipher_iv].ptr = dma_map_single(NULL, iv, ivsize, -+ DMA_TO_DEVICE); -+ td->ptr[cipher_iv].len = ivsize; -+ /* -+ * we don't need the cipher iv out length/pointer -+ * field to do ESP IPsec. Therefore we set the len field as 0, -+ * which tells the SEC not to do anything with this len/ptr -+ * field. Previously, when length/pointer as pointing to iv, -+ * it gave us corruption of packets. -+ */ -+ td->ptr[cipher_iv_out].len = 0; -+ } -+ if (enccrd && maccrd) { -+ /* this is ipsec only for now */ -+ td->hdr |= TALITOS_SEL1_MDEU -+ | TALITOS_MODE1_MDEU_INIT -+ | TALITOS_MODE1_MDEU_PAD; -+ switch (maccrd->crd_alg) { -+ case CRYPTO_MD5: -+ td->hdr |= TALITOS_MODE1_MDEU_MD5; -+ break; -+ case CRYPTO_MD5_HMAC: -+ td->hdr |= TALITOS_MODE1_MDEU_MD5_HMAC; -+ break; -+ case CRYPTO_SHA1: -+ td->hdr |= TALITOS_MODE1_MDEU_SHA1; -+ break; -+ case CRYPTO_SHA1_HMAC: -+ td->hdr |= TALITOS_MODE1_MDEU_SHA1_HMAC; -+ break; -+ default: -+ /* We cannot order the SEC as requested */ -+ printk("%s: cannot do the order\n", -+ device_get_nameunit(sc->sc_cdev)); -+ err = EINVAL; -+ goto errout; -+ } -+ if ((maccrd->crd_alg == CRYPTO_MD5_HMAC) || -+ (maccrd->crd_alg == CRYPTO_SHA1_HMAC)) { -+ /* -+ * The offset from hash data to the start of -+ * crypt data is the difference in the skips. -+ */ -+ /* ipsec only for now */ -+ td->ptr[hmac_key].ptr = dma_map_single(NULL, -+ ses->ses_hmac, ses->ses_hmac_len, DMA_TO_DEVICE); -+ td->ptr[hmac_key].len = ses->ses_hmac_len; -+ td->ptr[in_fifo].ptr += enccrd->crd_skip; -+ td->ptr[in_fifo].len = enccrd->crd_len; -+ td->ptr[out_fifo].ptr += enccrd->crd_skip; -+ td->ptr[out_fifo].len = enccrd->crd_len; -+ /* bytes of HMAC to postpend to ciphertext */ -+ td->ptr[out_fifo].extent = ses->ses_mlen; -+ td->ptr[hmac_data].ptr += maccrd->crd_skip; -+ td->ptr[hmac_data].len = enccrd->crd_skip - maccrd->crd_skip; -+ } -+ if (enccrd->crd_flags & CRD_F_KEY_EXPLICIT) { -+ printk("%s: CRD_F_KEY_EXPLICIT unimplemented\n", -+ device_get_nameunit(sc->sc_cdev)); -+ } -+ } -+ if (!enccrd && maccrd) { -+ /* single MD5 or SHA */ -+ td->hdr |= TALITOS_SEL0_MDEU -+ | TALITOS_MODE0_MDEU_INIT -+ | TALITOS_MODE0_MDEU_PAD; -+ switch (maccrd->crd_alg) { -+ case CRYPTO_MD5: -+ td->hdr |= TALITOS_MODE0_MDEU_MD5; -+ DPRINTF("MD5 ses %d ch %d len %d\n", -+ (u32)TALITOS_SESSION(crp->crp_sid), -+ chsel, td->ptr[in_fifo].len); -+ break; -+ case CRYPTO_MD5_HMAC: -+ td->hdr |= TALITOS_MODE0_MDEU_MD5_HMAC; -+ break; -+ case CRYPTO_SHA1: -+ td->hdr |= TALITOS_MODE0_MDEU_SHA1; -+ DPRINTF("SHA1 ses %d ch %d len %d\n", -+ (u32)TALITOS_SESSION(crp->crp_sid), -+ chsel, td->ptr[in_fifo].len); -+ break; -+ case CRYPTO_SHA1_HMAC: -+ td->hdr |= TALITOS_MODE0_MDEU_SHA1_HMAC; -+ break; -+ default: -+ /* We cannot order the SEC as requested */ -+ DPRINTF("cannot do the order\n"); -+ err = EINVAL; -+ goto errout; -+ } -+ -+ if (crp->crp_flags & CRYPTO_F_IOV) -+ td->ptr[out_fifo].ptr += maccrd->crd_inject; -+ -+ if ((maccrd->crd_alg == CRYPTO_MD5_HMAC) || -+ (maccrd->crd_alg == CRYPTO_SHA1_HMAC)) { -+ td->ptr[hmac_key].ptr = dma_map_single(NULL, -+ ses->ses_hmac, ses->ses_hmac_len, -+ DMA_TO_DEVICE); -+ td->ptr[hmac_key].len = ses->ses_hmac_len; -+ } -+ } -+ else { -+ /* using process key (session data has duplicate) */ -+ td->ptr[cipher_key].ptr = dma_map_single(NULL, -+ enccrd->crd_key, (enccrd->crd_klen + 7) / 8, -+ DMA_TO_DEVICE); -+ td->ptr[cipher_key].len = (enccrd->crd_klen + 7) / 8; -+ } -+ /* descriptor complete - GO! */ -+ return talitos_submit(sc, td, chsel); -+ -+errout: -+ if (err != ERESTART) { -+ crp->crp_etype = err; -+ crypto_done(crp); -+ } -+ return err; -+} -+ -+/* go through all channels descriptors, notifying OCF what has -+ * _and_hasn't_ successfully completed and reset the device -+ * (otherwise it's up to decoding desc hdrs!) -+ */ -+static void talitos_errorprocessing(struct talitos_softc *sc) -+{ -+ unsigned long flags; -+ int i, j; -+ -+ /* disable further scheduling until under control */ -+ spin_lock_irqsave(&sc->sc_chnfifolock[sc->sc_num_channels], flags); -+ -+ if (debug) dump_talitos_status(sc); -+ /* go through descriptors, try and salvage those successfully done, -+ * and EIO those that weren't -+ */ -+ for (i = 0; i < sc->sc_num_channels; i++) { -+ spin_lock_irqsave(&sc->sc_chnfifolock[i], flags); -+ for (j = 0; j < sc->sc_chfifo_len; j++) { -+ if (sc->sc_chnfifo[i][j].cf_desc.hdr) { -+ if ((sc->sc_chnfifo[i][j].cf_desc.hdr -+ & TALITOS_HDR_DONE_BITS) -+ != TALITOS_HDR_DONE_BITS) { -+ /* this one didn't finish */ -+ /* signify in crp->etype */ -+ sc->sc_chnfifo[i][j].cf_crp->crp_etype -+ = EIO; -+ } -+ } else -+ continue; /* free entry */ -+ /* either way, notify ocf */ -+ crypto_done(sc->sc_chnfifo[i][j].cf_crp); -+ /* and tag it available again -+ * -+ * memset to ensure correct descriptor formation by -+ * avoiding inadvertently setting "optional" entries -+ * e.g. not using "optional" dptr2 MD/HMAC processing -+ */ -+ memset(&sc->sc_chnfifo[i][j].cf_desc, -+ 0, sizeof(struct talitos_desc)); -+ } -+ spin_unlock_irqrestore(&sc->sc_chnfifolock[i], flags); -+ } -+ /* reset and initialize the SEC h/w device */ -+ talitos_reset_device(sc); -+ talitos_init_device(sc); -+#ifdef CONFIG_OCF_RANDOMHARVEST -+ if (sc->sc_exec_units & TALITOS_HAS_EU_RNG) -+ talitos_rng_init(sc); -+#endif -+ -+ /* Okay. Stand by. */ -+ spin_unlock_irqrestore(&sc->sc_chnfifolock[sc->sc_num_channels], flags); -+ -+ return; -+} -+ -+/* go through all channels descriptors, notifying OCF what's been done */ -+static void talitos_doneprocessing(struct talitos_softc *sc) -+{ -+ unsigned long flags; -+ int i, j; -+ -+ /* go through descriptors looking for done bits */ -+ for (i = 0; i < sc->sc_num_channels; i++) { -+ spin_lock_irqsave(&sc->sc_chnfifolock[i], flags); -+ for (j = 0; j < sc->sc_chfifo_len; j++) { -+ /* descriptor has done bits set? */ -+ if ((sc->sc_chnfifo[i][j].cf_desc.hdr -+ & TALITOS_HDR_DONE_BITS) -+ == TALITOS_HDR_DONE_BITS) { -+ /* notify ocf */ -+ crypto_done(sc->sc_chnfifo[i][j].cf_crp); -+ /* and tag it available again -+ * -+ * memset to ensure correct descriptor formation by -+ * avoiding inadvertently setting "optional" entries -+ * e.g. not using "optional" dptr2 MD/HMAC processing -+ */ -+ memset(&sc->sc_chnfifo[i][j].cf_desc, -+ 0, sizeof(struct talitos_desc)); -+ } -+ } -+ spin_unlock_irqrestore(&sc->sc_chnfifolock[i], flags); -+ } -+ return; -+} -+ -+static irqreturn_t -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) -+talitos_intr(int irq, void *arg) -+#else -+talitos_intr(int irq, void *arg, struct pt_regs *regs) -+#endif -+{ -+ struct talitos_softc *sc = arg; -+ u_int32_t v, v_hi; -+ -+ /* ack */ -+ v = talitos_read(sc->sc_base_addr + TALITOS_ISR); -+ v_hi = talitos_read(sc->sc_base_addr + TALITOS_ISR_HI); -+ talitos_write(sc->sc_base_addr + TALITOS_ICR, v); -+ talitos_write(sc->sc_base_addr + TALITOS_ICR_HI, v_hi); -+ -+ if (unlikely(v & TALITOS_ISR_ERROR)) { -+ /* Okay, Houston, we've had a problem here. */ -+ printk(KERN_DEBUG "%s: got error interrupt - ISR 0x%08x_%08x\n", -+ device_get_nameunit(sc->sc_cdev), v, v_hi); -+ talitos_errorprocessing(sc); -+ } else -+ if (likely(v & TALITOS_ISR_DONE)) { -+ talitos_doneprocessing(sc); -+ } -+ return IRQ_HANDLED; -+} -+ -+/* -+ * Initialize registers we need to touch only once. -+ */ -+static void -+talitos_init_device(struct talitos_softc *sc) -+{ -+ u_int32_t v; -+ int i; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ /* init all channels */ -+ for (i = 0; i < sc->sc_num_channels; i++) { -+ v = talitos_read(sc->sc_base_addr + -+ i*TALITOS_CH_OFFSET + TALITOS_CH_CCCR_HI); -+ v |= TALITOS_CH_CCCR_HI_CDWE -+ | TALITOS_CH_CCCR_HI_CDIE; /* invoke interrupt if done */ -+ talitos_write(sc->sc_base_addr + -+ i*TALITOS_CH_OFFSET + TALITOS_CH_CCCR_HI, v); -+ } -+ /* enable all interrupts */ -+ v = talitos_read(sc->sc_base_addr + TALITOS_IMR); -+ v |= TALITOS_IMR_ALL; -+ talitos_write(sc->sc_base_addr + TALITOS_IMR, v); -+ v = talitos_read(sc->sc_base_addr + TALITOS_IMR_HI); -+ v |= TALITOS_IMR_HI_ERRONLY; -+ talitos_write(sc->sc_base_addr + TALITOS_IMR_HI, v); -+ return; -+} -+ -+/* -+ * set the master reset bit on the device. -+ */ -+static void -+talitos_reset_device_master(struct talitos_softc *sc) -+{ -+ u_int32_t v; -+ -+ /* Reset the device by writing 1 to MCR:SWR and waiting 'til cleared */ -+ v = talitos_read(sc->sc_base_addr + TALITOS_MCR); -+ talitos_write(sc->sc_base_addr + TALITOS_MCR, v | TALITOS_MCR_SWR); -+ -+ while (talitos_read(sc->sc_base_addr + TALITOS_MCR) & TALITOS_MCR_SWR) -+ cpu_relax(); -+ -+ return; -+} -+ -+/* -+ * Resets the device. Values in the registers are left as is -+ * from the reset (i.e. initial values are assigned elsewhere). -+ */ -+static void -+talitos_reset_device(struct talitos_softc *sc) -+{ -+ u_int32_t v; -+ int i; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ /* -+ * Master reset -+ * errata documentation: warning: certain SEC interrupts -+ * are not fully cleared by writing the MCR:SWR bit, -+ * set bit twice to completely reset -+ */ -+ talitos_reset_device_master(sc); /* once */ -+ talitos_reset_device_master(sc); /* and once again */ -+ -+ /* reset all channels */ -+ for (i = 0; i < sc->sc_num_channels; i++) { -+ v = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET + -+ TALITOS_CH_CCCR); -+ talitos_write(sc->sc_base_addr + i*TALITOS_CH_OFFSET + -+ TALITOS_CH_CCCR, v | TALITOS_CH_CCCR_RESET); -+ } -+} -+ -+/* Set up the crypto device structure, private data, -+ * and anything else we need before we start */ -+#ifdef CONFIG_PPC_MERGE -+static int talitos_probe(struct of_device *ofdev, const struct of_device_id *match) -+#else -+static int talitos_probe(struct platform_device *pdev) -+#endif -+{ -+ struct talitos_softc *sc = NULL; -+ struct resource *r; -+#ifdef CONFIG_PPC_MERGE -+ struct device *device = &ofdev->dev; -+ struct device_node *np = ofdev->node; -+ const unsigned int *prop; -+ int err; -+ struct resource res; -+#endif -+ static int num_chips = 0; -+ int rc; -+ int i; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ -+ sc = (struct talitos_softc *) kmalloc(sizeof(*sc), GFP_KERNEL); -+ if (!sc) -+ return -ENOMEM; -+ memset(sc, 0, sizeof(*sc)); -+ -+ softc_device_init(sc, DRV_NAME, num_chips, talitos_methods); -+ -+ sc->sc_irq = -1; -+ sc->sc_cid = -1; -+#ifndef CONFIG_PPC_MERGE -+ sc->sc_dev = pdev; -+#endif -+ sc->sc_num = num_chips++; -+ -+#ifdef CONFIG_PPC_MERGE -+ dev_set_drvdata(device, sc); -+#else -+ platform_set_drvdata(sc->sc_dev, sc); -+#endif -+ -+ /* get the irq line */ -+#ifdef CONFIG_PPC_MERGE -+ err = of_address_to_resource(np, 0, &res); -+ if (err) -+ return -EINVAL; -+ r = &res; -+ -+ sc->sc_irq = irq_of_parse_and_map(np, 0); -+#else -+ /* get a pointer to the register memory */ -+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ -+ sc->sc_irq = platform_get_irq(pdev, 0); -+#endif -+ rc = request_irq(sc->sc_irq, talitos_intr, 0, -+ device_get_nameunit(sc->sc_cdev), sc); -+ if (rc) { -+ printk(KERN_ERR "%s: failed to hook irq %d\n", -+ device_get_nameunit(sc->sc_cdev), sc->sc_irq); -+ sc->sc_irq = -1; -+ goto out; -+ } -+ -+ sc->sc_base_addr = (ocf_iomem_t) ioremap(r->start, (r->end - r->start)); -+ if (!sc->sc_base_addr) { -+ printk(KERN_ERR "%s: failed to ioremap\n", -+ device_get_nameunit(sc->sc_cdev)); -+ goto out; -+ } -+ -+ /* figure out our SEC's properties and capabilities */ -+ sc->sc_chiprev = (u64)talitos_read(sc->sc_base_addr + TALITOS_ID) << 32 -+ | talitos_read(sc->sc_base_addr + TALITOS_ID_HI); -+ DPRINTF("sec id 0x%llx\n", sc->sc_chiprev); -+ -+#ifdef CONFIG_PPC_MERGE -+ /* get SEC properties from device tree, defaulting to SEC 2.0 */ -+ -+ prop = of_get_property(np, "num-channels", NULL); -+ sc->sc_num_channels = prop ? *prop : TALITOS_NCHANNELS_SEC_2_0; -+ -+ prop = of_get_property(np, "channel-fifo-len", NULL); -+ sc->sc_chfifo_len = prop ? *prop : TALITOS_CHFIFOLEN_SEC_2_0; -+ -+ prop = of_get_property(np, "exec-units-mask", NULL); -+ sc->sc_exec_units = prop ? *prop : TALITOS_HAS_EUS_SEC_2_0; -+ -+ prop = of_get_property(np, "descriptor-types-mask", NULL); -+ sc->sc_desc_types = prop ? *prop : TALITOS_HAS_DESCTYPES_SEC_2_0; -+#else -+ /* bulk should go away with openfirmware flat device tree support */ -+ if (sc->sc_chiprev & TALITOS_ID_SEC_2_0) { -+ sc->sc_num_channels = TALITOS_NCHANNELS_SEC_2_0; -+ sc->sc_chfifo_len = TALITOS_CHFIFOLEN_SEC_2_0; -+ sc->sc_exec_units = TALITOS_HAS_EUS_SEC_2_0; -+ sc->sc_desc_types = TALITOS_HAS_DESCTYPES_SEC_2_0; -+ } else { -+ printk(KERN_ERR "%s: failed to id device\n", -+ device_get_nameunit(sc->sc_cdev)); -+ goto out; -+ } -+#endif -+ -+ /* + 1 is for the meta-channel lock used by the channel scheduler */ -+ sc->sc_chnfifolock = (spinlock_t *) kmalloc( -+ (sc->sc_num_channels + 1) * sizeof(spinlock_t), GFP_KERNEL); -+ if (!sc->sc_chnfifolock) -+ goto out; -+ for (i = 0; i < sc->sc_num_channels + 1; i++) { -+ spin_lock_init(&sc->sc_chnfifolock[i]); -+ } -+ -+ sc->sc_chnlastalg = (int *) kmalloc( -+ sc->sc_num_channels * sizeof(int), GFP_KERNEL); -+ if (!sc->sc_chnlastalg) -+ goto out; -+ memset(sc->sc_chnlastalg, 0, sc->sc_num_channels * sizeof(int)); -+ -+ sc->sc_chnfifo = (struct desc_cryptop_pair **) kmalloc( -+ sc->sc_num_channels * sizeof(struct desc_cryptop_pair *), -+ GFP_KERNEL); -+ if (!sc->sc_chnfifo) -+ goto out; -+ for (i = 0; i < sc->sc_num_channels; i++) { -+ sc->sc_chnfifo[i] = (struct desc_cryptop_pair *) kmalloc( -+ sc->sc_chfifo_len * sizeof(struct desc_cryptop_pair), -+ GFP_KERNEL); -+ if (!sc->sc_chnfifo[i]) -+ goto out; -+ memset(sc->sc_chnfifo[i], 0, -+ sc->sc_chfifo_len * sizeof(struct desc_cryptop_pair)); -+ } -+ -+ /* reset and initialize the SEC h/w device */ -+ talitos_reset_device(sc); -+ talitos_init_device(sc); -+ -+ sc->sc_cid = crypto_get_driverid(softc_get_device(sc),CRYPTOCAP_F_HARDWARE); -+ if (sc->sc_cid < 0) { -+ printk(KERN_ERR "%s: could not get crypto driver id\n", -+ device_get_nameunit(sc->sc_cdev)); -+ goto out; -+ } -+ -+ /* register algorithms with the framework */ -+ printk("%s:", device_get_nameunit(sc->sc_cdev)); -+ -+ if (sc->sc_exec_units & TALITOS_HAS_EU_RNG) { -+ printk(" rng"); -+#ifdef CONFIG_OCF_RANDOMHARVEST -+ talitos_rng_init(sc); -+ crypto_rregister(sc->sc_cid, talitos_read_random, sc); -+#endif -+ } -+ if (sc->sc_exec_units & TALITOS_HAS_EU_DEU) { -+ printk(" des/3des"); -+ crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0); -+ crypto_register(sc->sc_cid, CRYPTO_DES_CBC, 0, 0); -+ } -+ if (sc->sc_exec_units & TALITOS_HAS_EU_AESU) { -+ printk(" aes"); -+ crypto_register(sc->sc_cid, CRYPTO_AES_CBC, 0, 0); -+ } -+ if (sc->sc_exec_units & TALITOS_HAS_EU_MDEU) { -+ printk(" md5"); -+ crypto_register(sc->sc_cid, CRYPTO_MD5, 0, 0); -+ /* HMAC support only with IPsec for now */ -+ crypto_register(sc->sc_cid, CRYPTO_MD5_HMAC, 0, 0); -+ printk(" sha1"); -+ crypto_register(sc->sc_cid, CRYPTO_SHA1, 0, 0); -+ /* HMAC support only with IPsec for now */ -+ crypto_register(sc->sc_cid, CRYPTO_SHA1_HMAC, 0, 0); -+ } -+ printk("\n"); -+ return 0; -+ -+out: -+#ifndef CONFIG_PPC_MERGE -+ talitos_remove(pdev); -+#endif -+ return -ENOMEM; -+} -+ -+#ifdef CONFIG_PPC_MERGE -+static int talitos_remove(struct of_device *ofdev) -+#else -+static int talitos_remove(struct platform_device *pdev) -+#endif -+{ -+#ifdef CONFIG_PPC_MERGE -+ struct talitos_softc *sc = dev_get_drvdata(&ofdev->dev); -+#else -+ struct talitos_softc *sc = platform_get_drvdata(pdev); -+#endif -+ int i; -+ -+ DPRINTF("%s()\n", __FUNCTION__); -+ if (sc->sc_cid >= 0) -+ crypto_unregister_all(sc->sc_cid); -+ if (sc->sc_chnfifo) { -+ for (i = 0; i < sc->sc_num_channels; i++) -+ if (sc->sc_chnfifo[i]) -+ kfree(sc->sc_chnfifo[i]); -+ kfree(sc->sc_chnfifo); -+ } -+ if (sc->sc_chnlastalg) -+ kfree(sc->sc_chnlastalg); -+ if (sc->sc_chnfifolock) -+ kfree(sc->sc_chnfifolock); -+ if (sc->sc_irq != -1) -+ free_irq(sc->sc_irq, sc); -+ if (sc->sc_base_addr) -+ iounmap((void *) sc->sc_base_addr); -+ kfree(sc); -+ return 0; -+} -+ -+#ifdef CONFIG_PPC_MERGE -+static struct of_device_id talitos_match[] = { -+ { -+ .type = "crypto", -+ .compatible = "talitos", -+ }, -+ {}, -+}; -+ -+MODULE_DEVICE_TABLE(of, talitos_match); -+ -+static struct of_platform_driver talitos_driver = { -+ .name = DRV_NAME, -+ .match_table = talitos_match, -+ .probe = talitos_probe, -+ .remove = talitos_remove, -+}; -+ -+static int __init talitos_init(void) -+{ -+ return of_register_platform_driver(&talitos_driver); -+} -+ -+static void __exit talitos_exit(void) -+{ -+ of_unregister_platform_driver(&talitos_driver); -+} -+#else -+/* Structure for a platform device driver */ -+static struct platform_driver talitos_driver = { -+ .probe = talitos_probe, -+ .remove = talitos_remove, -+ .driver = { -+ .name = "fsl-sec2", -+ } -+}; -+ -+static int __init talitos_init(void) -+{ -+ return platform_driver_register(&talitos_driver); -+} -+ -+static void __exit talitos_exit(void) -+{ -+ platform_driver_unregister(&talitos_driver); -+} -+#endif -+ -+module_init(talitos_init); -+module_exit(talitos_exit); -+ -+MODULE_LICENSE("Dual BSD/GPL"); -+MODULE_AUTHOR("kim.phillips@freescale.com"); -+MODULE_DESCRIPTION("OCF driver for Freescale SEC (talitos)"); -diff -Nur linux-2.6.30.orig/crypto/ocf/talitos/talitos_dev.h linux-2.6.30/crypto/ocf/talitos/talitos_dev.h ---- linux-2.6.30.orig/crypto/ocf/talitos/talitos_dev.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/talitos/talitos_dev.h 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,277 @@ -+/* -+ * Freescale SEC (talitos) device dependent data structures -+ * -+ * Copyright (c) 2006 Freescale Semiconductor, Inc. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The name of the author may not be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ */ -+ -+/* device ID register values */ -+#define TALITOS_ID_SEC_2_0 0x40 -+#define TALITOS_ID_SEC_2_1 0x40 /* cross ref with IP block revision reg */ -+ -+/* -+ * following num_channels, channel-fifo-depth, exec-unit-mask, and -+ * descriptor-types-mask are for forward-compatibility with openfirmware -+ * flat device trees -+ */ -+ -+/* -+ * num_channels : the number of channels available in each SEC version. -+ */ -+ -+/* n.b. this driver requires these values be a power of 2 */ -+#define TALITOS_NCHANNELS_SEC_1_0 4 -+#define TALITOS_NCHANNELS_SEC_1_2 1 -+#define TALITOS_NCHANNELS_SEC_2_0 4 -+#define TALITOS_NCHANNELS_SEC_2_01 4 -+#define TALITOS_NCHANNELS_SEC_2_1 4 -+#define TALITOS_NCHANNELS_SEC_2_4 4 -+ -+/* -+ * channel-fifo-depth : The number of descriptor -+ * pointers a channel fetch fifo can hold. -+ */ -+#define TALITOS_CHFIFOLEN_SEC_1_0 1 -+#define TALITOS_CHFIFOLEN_SEC_1_2 1 -+#define TALITOS_CHFIFOLEN_SEC_2_0 24 -+#define TALITOS_CHFIFOLEN_SEC_2_01 24 -+#define TALITOS_CHFIFOLEN_SEC_2_1 24 -+#define TALITOS_CHFIFOLEN_SEC_2_4 24 -+ -+/* -+ * exec-unit-mask : The bitmask representing what Execution Units (EUs) -+ * are available. EU information should be encoded following the SEC's -+ * EU_SEL0 bitfield documentation, i.e. as follows: -+ * -+ * bit 31 = set if SEC permits no-EU selection (should be always set) -+ * bit 30 = set if SEC has the ARC4 EU (AFEU) -+ * bit 29 = set if SEC has the des/3des EU (DEU) -+ * bit 28 = set if SEC has the message digest EU (MDEU) -+ * bit 27 = set if SEC has the random number generator EU (RNG) -+ * bit 26 = set if SEC has the public key EU (PKEU) -+ * bit 25 = set if SEC has the aes EU (AESU) -+ * bit 24 = set if SEC has the Kasumi EU (KEU) -+ * -+ */ -+#define TALITOS_HAS_EU_NONE (1<<0) -+#define TALITOS_HAS_EU_AFEU (1<<1) -+#define TALITOS_HAS_EU_DEU (1<<2) -+#define TALITOS_HAS_EU_MDEU (1<<3) -+#define TALITOS_HAS_EU_RNG (1<<4) -+#define TALITOS_HAS_EU_PKEU (1<<5) -+#define TALITOS_HAS_EU_AESU (1<<6) -+#define TALITOS_HAS_EU_KEU (1<<7) -+ -+/* the corresponding masks for each SEC version */ -+#define TALITOS_HAS_EUS_SEC_1_0 0x7f -+#define TALITOS_HAS_EUS_SEC_1_2 0x4d -+#define TALITOS_HAS_EUS_SEC_2_0 0x7f -+#define TALITOS_HAS_EUS_SEC_2_01 0x7f -+#define TALITOS_HAS_EUS_SEC_2_1 0xff -+#define TALITOS_HAS_EUS_SEC_2_4 0x7f -+ -+/* -+ * descriptor-types-mask : The bitmask representing what descriptors -+ * are available. Descriptor type information should be encoded -+ * following the SEC's Descriptor Header Dword DESC_TYPE field -+ * documentation, i.e. as follows: -+ * -+ * bit 0 = set if SEC supports the aesu_ctr_nonsnoop desc. type -+ * bit 1 = set if SEC supports the ipsec_esp descriptor type -+ * bit 2 = set if SEC supports the common_nonsnoop desc. type -+ * bit 3 = set if SEC supports the 802.11i AES ccmp desc. type -+ * bit 4 = set if SEC supports the hmac_snoop_no_afeu desc. type -+ * bit 5 = set if SEC supports the srtp descriptor type -+ * bit 6 = set if SEC supports the non_hmac_snoop_no_afeu desc.type -+ * bit 7 = set if SEC supports the pkeu_assemble descriptor type -+ * bit 8 = set if SEC supports the aesu_key_expand_output desc.type -+ * bit 9 = set if SEC supports the pkeu_ptmul descriptor type -+ * bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type -+ * bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type -+ * -+ * ..and so on and so forth. -+ */ -+#define TALITOS_HAS_DT_AESU_CTR_NONSNOOP (1<<0) -+#define TALITOS_HAS_DT_IPSEC_ESP (1<<1) -+#define TALITOS_HAS_DT_COMMON_NONSNOOP (1<<2) -+ -+/* the corresponding masks for each SEC version */ -+#define TALITOS_HAS_DESCTYPES_SEC_2_0 0x01010ebf -+#define TALITOS_HAS_DESCTYPES_SEC_2_1 0x012b0ebf -+ -+/* -+ * a TALITOS_xxx_HI address points to the low data bits (32-63) of the register -+ */ -+ -+/* global register offset addresses */ -+#define TALITOS_ID 0x1020 -+#define TALITOS_ID_HI 0x1024 -+#define TALITOS_MCR 0x1030 /* master control register */ -+#define TALITOS_MCR_HI 0x1038 /* master control register */ -+#define TALITOS_MCR_SWR 0x1 -+#define TALITOS_IMR 0x1008 /* interrupt mask register */ -+#define TALITOS_IMR_ALL 0x00010fff /* enable all interrupts mask */ -+#define TALITOS_IMR_ERRONLY 0x00010aaa /* enable error interrupts */ -+#define TALITOS_IMR_HI 0x100C /* interrupt mask register */ -+#define TALITOS_IMR_HI_ALL 0x00323333 /* enable all interrupts mask */ -+#define TALITOS_IMR_HI_ERRONLY 0x00222222 /* enable error interrupts */ -+#define TALITOS_ISR 0x1010 /* interrupt status register */ -+#define TALITOS_ISR_ERROR 0x00010faa /* errors mask */ -+#define TALITOS_ISR_DONE 0x00000055 /* channel(s) done mask */ -+#define TALITOS_ISR_HI 0x1014 /* interrupt status register */ -+#define TALITOS_ICR 0x1018 /* interrupt clear register */ -+#define TALITOS_ICR_HI 0x101C /* interrupt clear register */ -+ -+/* channel register address stride */ -+#define TALITOS_CH_OFFSET 0x100 -+ -+/* channel register offset addresses and bits */ -+#define TALITOS_CH_CCCR 0x1108 /* Crypto-Channel Config Register */ -+#define TALITOS_CH_CCCR_RESET 0x1 /* Channel Reset bit */ -+#define TALITOS_CH_CCCR_HI 0x110c /* Crypto-Channel Config Register */ -+#define TALITOS_CH_CCCR_HI_CDWE 0x10 /* Channel done writeback enable bit */ -+#define TALITOS_CH_CCCR_HI_NT 0x4 /* Notification type bit */ -+#define TALITOS_CH_CCCR_HI_CDIE 0x2 /* Channel Done Interrupt Enable bit */ -+#define TALITOS_CH_CCPSR 0x1110 /* Crypto-Channel Pointer Status Reg */ -+#define TALITOS_CH_CCPSR_HI 0x1114 /* Crypto-Channel Pointer Status Reg */ -+#define TALITOS_CH_FF 0x1148 /* Fetch FIFO */ -+#define TALITOS_CH_FF_HI 0x114c /* Fetch FIFO's FETCH_ADRS */ -+#define TALITOS_CH_CDPR 0x1140 /* Crypto-Channel Pointer Status Reg */ -+#define TALITOS_CH_CDPR_HI 0x1144 /* Crypto-Channel Pointer Status Reg */ -+#define TALITOS_CH_DESCBUF 0x1180 /* (thru 11bf) Crypto-Channel -+ * Descriptor Buffer (debug) */ -+ -+/* execution unit register offset addresses and bits */ -+#define TALITOS_DEUSR 0x2028 /* DEU status register */ -+#define TALITOS_DEUSR_HI 0x202c /* DEU status register */ -+#define TALITOS_DEUISR 0x2030 /* DEU interrupt status register */ -+#define TALITOS_DEUISR_HI 0x2034 /* DEU interrupt status register */ -+#define TALITOS_DEUICR 0x2038 /* DEU interrupt control register */ -+#define TALITOS_DEUICR_HI 0x203c /* DEU interrupt control register */ -+#define TALITOS_AESUISR 0x4030 /* AESU interrupt status register */ -+#define TALITOS_AESUISR_HI 0x4034 /* AESU interrupt status register */ -+#define TALITOS_AESUICR 0x4038 /* AESU interrupt control register */ -+#define TALITOS_AESUICR_HI 0x403c /* AESU interrupt control register */ -+#define TALITOS_MDEUISR 0x6030 /* MDEU interrupt status register */ -+#define TALITOS_MDEUISR_HI 0x6034 /* MDEU interrupt status register */ -+#define TALITOS_RNGSR 0xa028 /* RNG status register */ -+#define TALITOS_RNGSR_HI 0xa02c /* RNG status register */ -+#define TALITOS_RNGSR_HI_RD 0x1 /* RNG Reset done */ -+#define TALITOS_RNGSR_HI_OFL 0xff0000/* number of dwords in RNG output FIFO*/ -+#define TALITOS_RNGDSR 0xa010 /* RNG data size register */ -+#define TALITOS_RNGDSR_HI 0xa014 /* RNG data size register */ -+#define TALITOS_RNG_FIFO 0xa800 /* RNG FIFO - pool of random numbers */ -+#define TALITOS_RNGISR 0xa030 /* RNG Interrupt status register */ -+#define TALITOS_RNGISR_HI 0xa034 /* RNG Interrupt status register */ -+#define TALITOS_RNGRCR 0xa018 /* RNG Reset control register */ -+#define TALITOS_RNGRCR_HI 0xa01c /* RNG Reset control register */ -+#define TALITOS_RNGRCR_HI_SR 0x1 /* RNG RNGRCR:Software Reset */ -+ -+/* descriptor pointer entry */ -+struct talitos_desc_ptr { -+ u16 len; /* length */ -+ u8 extent; /* jump (to s/g link table) and extent */ -+ u8 res; /* reserved */ -+ u32 ptr; /* pointer */ -+}; -+ -+/* descriptor */ -+struct talitos_desc { -+ u32 hdr; /* header */ -+ u32 res; /* reserved */ -+ struct talitos_desc_ptr ptr[7]; /* ptr/len pair array */ -+}; -+ -+/* talitos descriptor header (hdr) bits */ -+ -+/* primary execution unit select */ -+#define TALITOS_SEL0_AFEU 0x10000000 -+#define TALITOS_SEL0_DEU 0x20000000 -+#define TALITOS_SEL0_MDEU 0x30000000 -+#define TALITOS_SEL0_RNG 0x40000000 -+#define TALITOS_SEL0_PKEU 0x50000000 -+#define TALITOS_SEL0_AESU 0x60000000 -+ -+/* primary execution unit mode (MODE0) and derivatives */ -+#define TALITOS_MODE0_AESU_CBC 0x00200000 -+#define TALITOS_MODE0_AESU_ENC 0x00100000 -+#define TALITOS_MODE0_DEU_CBC 0x00400000 -+#define TALITOS_MODE0_DEU_3DES 0x00200000 -+#define TALITOS_MODE0_DEU_ENC 0x00100000 -+#define TALITOS_MODE0_MDEU_INIT 0x01000000 /* init starting regs */ -+#define TALITOS_MODE0_MDEU_HMAC 0x00800000 -+#define TALITOS_MODE0_MDEU_PAD 0x00400000 /* PD */ -+#define TALITOS_MODE0_MDEU_MD5 0x00200000 -+#define TALITOS_MODE0_MDEU_SHA256 0x00100000 -+#define TALITOS_MODE0_MDEU_SHA1 0x00000000 /* SHA-160 */ -+#define TALITOS_MODE0_MDEU_MD5_HMAC \ -+ (TALITOS_MODE0_MDEU_MD5 | TALITOS_MODE0_MDEU_HMAC) -+#define TALITOS_MODE0_MDEU_SHA256_HMAC \ -+ (TALITOS_MODE0_MDEU_SHA256 | TALITOS_MODE0_MDEU_HMAC) -+#define TALITOS_MODE0_MDEU_SHA1_HMAC \ -+ (TALITOS_MODE0_MDEU_SHA1 | TALITOS_MODE0_MDEU_HMAC) -+ -+/* secondary execution unit select (SEL1) */ -+/* it's MDEU or nothing */ -+#define TALITOS_SEL1_MDEU 0x00030000 -+ -+/* secondary execution unit mode (MODE1) and derivatives */ -+#define TALITOS_MODE1_MDEU_INIT 0x00001000 /* init starting regs */ -+#define TALITOS_MODE1_MDEU_HMAC 0x00000800 -+#define TALITOS_MODE1_MDEU_PAD 0x00000400 /* PD */ -+#define TALITOS_MODE1_MDEU_MD5 0x00000200 -+#define TALITOS_MODE1_MDEU_SHA256 0x00000100 -+#define TALITOS_MODE1_MDEU_SHA1 0x00000000 /* SHA-160 */ -+#define TALITOS_MODE1_MDEU_MD5_HMAC \ -+ (TALITOS_MODE1_MDEU_MD5 | TALITOS_MODE1_MDEU_HMAC) -+#define TALITOS_MODE1_MDEU_SHA256_HMAC \ -+ (TALITOS_MODE1_MDEU_SHA256 | TALITOS_MODE1_MDEU_HMAC) -+#define TALITOS_MODE1_MDEU_SHA1_HMAC \ -+ (TALITOS_MODE1_MDEU_SHA1 | TALITOS_MODE1_MDEU_HMAC) -+ -+/* direction of overall data flow (DIR) */ -+#define TALITOS_DIR_OUTBOUND 0x00000000 -+#define TALITOS_DIR_INBOUND 0x00000002 -+ -+/* done notification (DN) */ -+#define TALITOS_DONE_NOTIFY 0x00000001 -+ -+/* descriptor types */ -+/* odd numbers here are valid on SEC2 and greater only (e.g. ipsec_esp) */ -+#define TD_TYPE_AESU_CTR_NONSNOOP (0 << 3) -+#define TD_TYPE_IPSEC_ESP (1 << 3) -+#define TD_TYPE_COMMON_NONSNOOP_NO_AFEU (2 << 3) -+#define TD_TYPE_HMAC_SNOOP_NO_AFEU (4 << 3) -+ -+#define TALITOS_HDR_DONE_BITS 0xff000000 -+ -+#define DPRINTF(a...) do { \ -+ if (debug) { \ -+ printk("%s: ", sc ? \ -+ device_get_nameunit(sc->sc_cdev) : "talitos"); \ -+ printk(a); \ -+ } \ -+ } while (0) -diff -Nur linux-2.6.30.orig/crypto/ocf/talitos/talitos_soft.h linux-2.6.30/crypto/ocf/talitos/talitos_soft.h ---- linux-2.6.30.orig/crypto/ocf/talitos/talitos_soft.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/talitos/talitos_soft.h 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,77 @@ -+/* -+ * Freescale SEC data structures for integration with ocf-linux -+ * -+ * Copyright (c) 2006 Freescale Semiconductor, Inc. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The name of the author may not be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+/* -+ * paired descriptor and associated crypto operation -+ */ -+struct desc_cryptop_pair { -+ struct talitos_desc cf_desc; /* descriptor ptr */ -+ struct cryptop *cf_crp; /* cryptop ptr */ -+}; -+ -+/* -+ * Holds data specific to a single talitos device. -+ */ -+struct talitos_softc { -+ softc_device_decl sc_cdev; -+ struct platform_device *sc_dev; /* device backpointer */ -+ ocf_iomem_t sc_base_addr; -+ int sc_irq; -+ int sc_num; /* if we have multiple chips */ -+ int32_t sc_cid; /* crypto tag */ -+ u64 sc_chiprev; /* major/minor chip revision */ -+ int sc_nsessions; -+ struct talitos_session *sc_sessions; -+ int sc_num_channels;/* number of crypto channels */ -+ int sc_chfifo_len; /* channel fetch fifo len */ -+ int sc_exec_units; /* execution units mask */ -+ int sc_desc_types; /* descriptor types mask */ -+ /* -+ * mutual exclusion for intra-channel resources, e.g. fetch fifos -+ * the last entry is a meta-channel lock used by the channel scheduler -+ */ -+ spinlock_t *sc_chnfifolock; -+ /* sc_chnlastalgo contains last algorithm for that channel */ -+ int *sc_chnlastalg; -+ /* sc_chnfifo holds pending descriptor--crypto operation pairs */ -+ struct desc_cryptop_pair **sc_chnfifo; -+}; -+ -+struct talitos_session { -+ u_int32_t ses_used; -+ u_int32_t ses_klen; /* key length in bits */ -+ u_int32_t ses_key[8]; /* DES/3DES/AES key */ -+ u_int32_t ses_hmac[5]; /* hmac inner state */ -+ u_int32_t ses_hmac_len; /* hmac length */ -+ u_int32_t ses_iv[4]; /* DES/3DES/AES iv */ -+ u_int32_t ses_mlen; /* desired hash result len (12=ipsec or 16) */ -+}; -+ -+#define TALITOS_SESSION(sid) ((sid) & 0x0fffffff) -+#define TALITOS_SID(crd, sesn) (((crd) << 28) | ((sesn) & 0x0fffffff)) -diff -Nur linux-2.6.30.orig/crypto/ocf/uio.h linux-2.6.30/crypto/ocf/uio.h ---- linux-2.6.30.orig/crypto/ocf/uio.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30/crypto/ocf/uio.h 2009-06-11 10:55:27.000000000 +0200 -@@ -0,0 +1,54 @@ -+#ifndef _OCF_UIO_H_ -+#define _OCF_UIO_H_ -+ -+#include <linux/uio.h> -+ -+/* -+ * The linux uio.h doesn't have all we need. To be fully api compatible -+ * with the BSD cryptodev, we need to keep this around. Perhaps this can -+ * be moved back into the linux/uio.h -+ * -+ * Linux port done by David McCullough <david_mccullough@securecomputing.com> -+ * Copyright (C) 2006-2007 David McCullough -+ * Copyright (C) 2004-2005 Intel Corporation. -+ * -+ * LICENSE TERMS -+ * -+ * The free distribution and use of this software in both source and binary -+ * form is allowed (with or without changes) provided that: -+ * -+ * 1. distributions of this source code include the above copyright -+ * notice, this list of conditions and the following disclaimer; -+ * -+ * 2. distributions in binary form include the above copyright -+ * notice, this list of conditions and the following disclaimer -+ * in the documentation and/or other associated materials; -+ * -+ * 3. the copyright holder's name is not used to endorse products -+ * built using this software without specific written permission. -+ * -+ * ALTERNATIVELY, provided that this notice is retained in full, this product -+ * may be distributed under the terms of the GNU General Public License (GPL), -+ * in which case the provisions of the GPL apply INSTEAD OF those given above. -+ * -+ * DISCLAIMER -+ * -+ * This software is provided 'as is' with no explicit or implied warranties -+ * in respect of its properties, including, but not limited to, correctness -+ * and/or fitness for purpose. -+ * --------------------------------------------------------------------------- -+ */ -+ -+struct uio { -+ struct iovec *uio_iov; -+ int uio_iovcnt; -+ off_t uio_offset; -+ int uio_resid; -+#if 0 -+ enum uio_seg uio_segflg; -+ enum uio_rw uio_rw; -+ struct thread *uio_td; -+#endif -+}; -+ -+#endif -diff -Nur linux-2.6.30.orig/drivers/char/random.c linux-2.6.30/drivers/char/random.c ---- linux-2.6.30.orig/drivers/char/random.c 2009-06-10 05:05:27.000000000 +0200 -+++ linux-2.6.30/drivers/char/random.c 2009-06-11 10:55:27.000000000 +0200 -@@ -129,6 +129,9 @@ - * unsigned int value); - * void add_interrupt_randomness(int irq); - * -+ * void random_input_words(__u32 *buf, size_t wordcount, int ent_count) -+ * int random_input_wait(void); -+ * - * add_input_randomness() uses the input layer interrupt timing, as well as - * the event type information from the hardware. - * -@@ -140,6 +143,13 @@ - * a better measure, since the timing of the disk interrupts are more - * unpredictable. - * -+ * random_input_words() just provides a raw block of entropy to the input -+ * pool, such as from a hardware entropy generator. -+ * -+ * random_input_wait() suspends the caller until such time as the -+ * entropy pool falls below the write threshold, and returns a count of how -+ * much entropy (in bits) is needed to sustain the pool. -+ * - * All of these routines try to estimate how many bits of randomness a - * particular randomness source. They do this by keeping track of the - * first and second order deltas of the event timings. -@@ -712,6 +722,61 @@ - } - #endif - -+/* -+ * random_input_words - add bulk entropy to pool -+ * -+ * @buf: buffer to add -+ * @wordcount: number of __u32 words to add -+ * @ent_count: total amount of entropy (in bits) to credit -+ * -+ * this provides bulk input of entropy to the input pool -+ * -+ */ -+void random_input_words(__u32 *buf, size_t wordcount, int ent_count) -+{ -+ mix_pool_bytes(&input_pool, buf, wordcount*4); -+ -+ credit_entropy_bits(&input_pool, ent_count); -+ -+ DEBUG_ENT("crediting %d bits => %d\n", -+ ent_count, input_pool.entropy_count); -+ /* -+ * Wake up waiting processes if we have enough -+ * entropy. -+ */ -+ if (input_pool.entropy_count >= random_read_wakeup_thresh) -+ wake_up_interruptible(&random_read_wait); -+} -+EXPORT_SYMBOL(random_input_words); -+ -+/* -+ * random_input_wait - wait until random needs entropy -+ * -+ * this function sleeps until the /dev/random subsystem actually -+ * needs more entropy, and then return the amount of entropy -+ * that it would be nice to have added to the system. -+ */ -+int random_input_wait(void) -+{ -+ int count; -+ -+ wait_event_interruptible(random_write_wait, -+ input_pool.entropy_count < random_write_wakeup_thresh); -+ -+ count = random_write_wakeup_thresh - input_pool.entropy_count; -+ -+ /* likely we got woken up due to a signal */ -+ if (count <= 0) count = random_read_wakeup_thresh; -+ -+ DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n", -+ count, -+ input_pool.entropy_count, random_write_wakeup_thresh); -+ -+ return count; -+} -+EXPORT_SYMBOL(random_input_wait); -+ -+ - #define EXTRACT_SIZE 10 - - /********************************************************************* -diff -Nur linux-2.6.30.orig/fs/fcntl.c linux-2.6.30/fs/fcntl.c ---- linux-2.6.30.orig/fs/fcntl.c 2009-06-10 05:05:27.000000000 +0200 -+++ linux-2.6.30/fs/fcntl.c 2009-06-11 10:55:27.000000000 +0200 -@@ -142,6 +142,7 @@ - } - return ret; - } -+EXPORT_SYMBOL(sys_dup); - - #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME) - -diff -Nur linux-2.6.30.orig/include/linux/miscdevice.h linux-2.6.30/include/linux/miscdevice.h ---- linux-2.6.30.orig/include/linux/miscdevice.h 2009-06-10 05:05:27.000000000 +0200 -+++ linux-2.6.30/include/linux/miscdevice.h 2009-06-11 10:55:27.000000000 +0200 -@@ -12,6 +12,7 @@ - #define APOLLO_MOUSE_MINOR 7 - #define PC110PAD_MINOR 9 - /*#define ADB_MOUSE_MINOR 10 FIXME OBSOLETE */ -+#define CRYPTODEV_MINOR 70 /* /dev/crypto */ - #define WATCHDOG_MINOR 130 /* Watchdog timer */ - #define TEMP_MINOR 131 /* Temperature Sensor */ - #define RTC_MINOR 135 -diff -Nur linux-2.6.30.orig/include/linux/random.h linux-2.6.30/include/linux/random.h ---- linux-2.6.30.orig/include/linux/random.h 2009-06-10 05:05:27.000000000 +0200 -+++ linux-2.6.30/include/linux/random.h 2009-06-11 10:55:27.000000000 +0200 -@@ -34,6 +34,30 @@ - /* Clear the entropy pool and associated counters. (Superuser only.) */ - #define RNDCLEARPOOL _IO( 'R', 0x06 ) - -+#ifdef CONFIG_FIPS_RNG -+ -+/* Size of seed value - equal to AES blocksize */ -+#define AES_BLOCK_SIZE_BYTES 16 -+#define SEED_SIZE_BYTES AES_BLOCK_SIZE_BYTES -+/* Size of AES key */ -+#define KEY_SIZE_BYTES 16 -+ -+/* ioctl() structure used by FIPS 140-2 Tests */ -+struct rand_fips_test { -+ unsigned char key[KEY_SIZE_BYTES]; /* Input */ -+ unsigned char datetime[SEED_SIZE_BYTES]; /* Input */ -+ unsigned char seed[SEED_SIZE_BYTES]; /* Input */ -+ unsigned char result[SEED_SIZE_BYTES]; /* Output */ -+}; -+ -+/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */ -+#define RNDFIPSVST _IOWR('R', 0x10, struct rand_fips_test) -+ -+/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */ -+#define RNDFIPSMCT _IOWR('R', 0x11, struct rand_fips_test) -+ -+#endif /* #ifdef CONFIG_FIPS_RNG */ -+ - struct rand_pool_info { - int entropy_count; - int buf_size; -@@ -50,6 +74,10 @@ - unsigned int value); - extern void add_interrupt_randomness(int irq); - -+extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count); -+extern int random_input_wait(void); -+#define HAS_RANDOM_INPUT_WAIT 1 -+ - extern void get_random_bytes(void *buf, int nbytes); - void generate_random_uuid(unsigned char uuid_out[16]); - |