diff options
Diffstat (limited to 'target/linux/config/Config.in.netfilter')
| -rw-r--r-- | target/linux/config/Config.in.netfilter | 456 |
1 files changed, 456 insertions, 0 deletions
diff --git a/target/linux/config/Config.in.netfilter b/target/linux/config/Config.in.netfilter new file mode 100644 index 000000000..6553471a0 --- /dev/null +++ b/target/linux/config/Config.in.netfilter @@ -0,0 +1,456 @@ +menu "Netfilter (Firewall/Filtering)" + +config ADK_KERNEL_NETFILTER + bool + default n + +config ADK_KERNEL_NETFILTER_ADVANCED + bool + default n + +config ADK_KERNEL_NETFILTER_XTABLES + bool + select ADK_KERNEL_NETFILTER + select ADK_KERNEL_NETFILTER_ADVANCED + default n + +config ADK_KERNEL_NETFILTER_DEBUG + bool + default n + +config ADK_KERNEL_IP_NF_MATCH_LAYER7_DEBUG + bool + default n + +config ADK_KERNEL_IP_NF_TARGET_MIRROR + tristate + default n + +config ADK_KERNEL_IP_NF_NAT_SNMP_BASIC + tristate + default n + +config ADK_KERNEL_IP_NF_TARGET_DSCP + tristate + default n + +config ADK_KERNEL_IP_NF_TARGET_MARK + tristate + default n + +config ADK_KERNEL_IP_NF_TARGET_CLASSIFY + tristate + default n + +config ADK_KERNEL_IP_NF_TARGET_IMQ + tristate + default n + +config ADK_KERNEL_IP_NF_TARGET_CONNMARK + tristate + default n + +config ADK_KERNEL_IP_NF_ARPTABLES + tristate + default n + +config ADK_KERNEL_IP_NF_COMPAT_IPCHAINS + tristate + default n + +config ADK_KERNEL_IP_NF_COMPAT_IPFWADM + tristate + default n + +config ADK_KERNEL_IP6_NF_QUEUE + tristate + default n + +config ADK_KERNEL_IP6_NF_IPTABLES + tristate + default n + +config ADK_KERNEL_IP_ROUTE_FWMARK + bool + default n + +config ADK_KERNEL_IP_NF_QUEUE + tristate + default n + +config ADK_KERNEL_IP_NF_MATCH_TIME + tristate + default n + +config ADK_KERNEL_IP_NF_MATCH_CONDITION + tristate + default n + +config ADK_KERNEL_IP_NF_MATCH_DSCP + tristate + default n + +config ADK_KERNEL_IP_NF_MATCH_AH_ESP + tristate + default n + +config ADK_KERNEL_IP_NF_MATCH_LENGTH + tristate + default n + +config ADK_KERNEL_IP_NF_MATCH_HELPER + tristate + default n + +# cannot be ADK_KERNEL_IP_NF_MATCH_STATE because +# netfilter is built as a module -> this'll always be +# a module, too +config ADK_KPACKAGE_KMOD_IP_NF_MATCH_STATE + tristate + select ADK_KPACKAGE_KMOD_NETFILTER_XT_MATCH_STATE + default n + +config ADK_KPACKAGE_KMOD_NETFILTER_XT_MATCH_STATE + tristate + default n + +# cannot be ADK_KERNEL_IP_NF_MATCH_CONNTRACK because +# netfilter is built as a module -> this'll always be +# a module, too +config ADK_KPACKAGE_KMOD_IP_NF_MATCH_CONNTRACK + tristate + default n + +config ADK_KERNEL_IP_NF_MATCH_CONNMARK + tristate + default n + +config ADK_KERNEL_IP_NF_MATCH_UNCLEAN + tristate + default n + +config ADK_KERNEL_IP_NF_MATCH_STRING + tristate + default n + +menu "Core Netfilter Configuration" + +config ADK_KPACKAGE_KMOD_NF_CONNTRACK + tristate 'Netfilter connection tracking support' + select ADK_KERNEL_NETFILTER_XTABLES + help + Connection tracking keeps a record of what packets have passed + through your machine, in order to figure out how they are related + into connections. + + Layer 3 independent connection tracking is experimental scheme + which generalize ip_conntrack to support other layer 3 protocols. + +config ADK_KPACKAGE_KMOD_NETFILTER_XT_TARGET_CLASSIFY + tristate '"CLASSIFY" target support' + select ADK_KERNEL_NETFILTER_XTABLES + help + This option adds a `CLASSIFY' target, which enables the user to set + the priority of a packet. Some qdiscs can use this value for + classification, among these are: + + atm, cbq, dsmark, pfifo_fast, htb, prio + +config ADK_KPACKAGE_KMOD_NETFILTER_XT_TARGET_CONNMARK + tristate '"CONNMARK" target support' + select ADK_KERNEL_NETFILTER_XTABLES + select ADK_KPACKAGE_KMOD_NF_CONNTRACK + help + This option adds a `CONNMARK' target, which allows one to manipulate + the connection mark value. Similar to the MARK target, but + affects the connection mark value rather than the packet mark value. + +config ADK_KPACKAGE_KMOD_NETFILTER_XT_TARGET_MARK + tristate '"MARK" target support' + select ADK_KERNEL_NETFILTER_XTABLES + help + This option adds a `MARK' target, which allows you to create rules + in the `mangle' table which alter the netfilter mark (nfmark) field + associated with the packet prior to routing. This can change + the routing method (see `Use netfilter MARK value as routing + key') and can also be used by other subsystems to change their + behavior. + +config ADK_KPACKAGE_KMOD_NETFILTER_XT_TARGET_NFQUEUE + tristate '"NFQUEUE" target support' + select ADK_KERNEL_NETFILTER_XTABLES + help + This target replaced the old obsolete QUEUE target. + + As opposed to QUEUE, it supports 65535 different queues, + not just one. + +endmenu + +menu "IP: Netfilter Configuration" + +config ADK_KPACKAGE_KMOD_NF_CONNTRACK_IPV4 + bool 'IPv4 connection tracking support (required for NAT)' + select ADK_KPACKAGE_KMOD_NF_CONNTRACK + help + Connection tracking keeps a record of what packets have passed + through your machine, in order to figure out how they are related + into connections. + +config ADK_KPACKAGE_KMOD_IP_NF_CT_ACCT + bool 'Connection tracking flow accounting' + depends ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK + help + If this option is enabled, the connection tracking code will + keep per-flow packet and byte counters. + + Those counters can be used for flow-based accounting or the + `connbytes' match. + +config ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK_MARK + bool 'Connection mark tracking support' + depends ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK + select ADK_KERNEL_IP_NF_MATCH_CONNMARK + help + This option enables support for connection marks, used by the + `CONNMARK' target and `connmark' match. Similar to the mark value + of packets, but this mark value is kept in the conntrack session + instead of the individual packets. + +config ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK_SECMARK + bool 'Connection tracking security mark support' + depends ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK + #FIXME select NETWORK_SECMARK + help + This option enables security markings to be applied to + connections. Typically they are copied to connections from + packets using the CONNSECMARK target and copied back from + connections to packets with the same target, with the packets + being originally labeled via SECMARK. + +config ADK_KPACKAGE_KMOD_IP_NF_FTP + tristate 'FTP protocol support' + depends ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK + help + Tracking FTP connections is problematic: special helpers are + required for tracking them, and doing masquerading and other forms + of Network Address Translation on them. + +config ADK_KPACKAGE_KMOD_IP_NF_IRC + tristate 'IRC protocol support' + depends ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK + help + There is a commonly-used extension to IRC called + Direct Client-to-Client Protocol (DCC). This enables users to send + files to each other, and also chat to each other without the need + of a server. DCC Sending is used anywhere you send files over IRC, + and DCC Chat is most commonly used by Eggdrop bots. If you are + using NAT, this extension will enable you to send files and initiate + chats. Note that you do NOT need this extension to get files or + have others initiate chats, or everything else in IRC. + +config ADK_KPACKAGE_KMOD_IP_NF_NETBIOS_NS + tristate 'NetBIOS name service protocol support (EXPERIMENTAL)' + depends ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK + help + NetBIOS name service requests are sent as broadcast messages from an + unprivileged port and responded to with unicast messages to the + same port. This make them hard to firewall properly because connection + tracking doesn't deal with broadcasts. This helper tracks locally + originating NetBIOS name service requests and the corresponding + responses. It relies on correct IP address configuration, specifically + netmask and broadcast address. When properly configured, the output + of "ip address show" should look similar to this: + + $ ip -4 address show eth0 + 4: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 + inet 172.16.2.252/24 brd 172.16.2.255 scope global eth0 + +config ADK_KPACKAGE_KMOD_IP_NF_TFTP + tristate 'TFTP protocol support' + depends ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK + help + TFTP connection tracking helper, this is required depending + on how restrictive your ruleset is. + If you are using a tftp client behind -j SNAT or -j MASQUERADING + you will need this. + +config ADK_KPACKAGE_KMOD_IP_NF_AMANDA + tristate 'Amanda backup protocol support' + depends ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK + #FIXME TEXTSEARCH && TEXTSEARCH_KMP + help + If you are running the Amanda backup package <http://www.amanda.org/> + on this machine or machines that will be MASQUERADED through this + machine, then you may want to enable this feature. This allows the + connection tracking and natting code to allow the sub-channels that + Amanda requires for communication of the backup data, messages and + index. + +config ADK_KPACKAGE_KMOD_IP_NF_PPTP + tristate 'PPTP protocol support' + depends ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK + help + This module adds support for PPTP (Point to Point Tunnelling + Protocol, RFC2637) connection tracking and NAT. + + If you are running PPTP sessions over a stateful firewall or NAT + box, you may want to enable this feature. + + Please note that not all PPTP modes of operation are supported yet. + For more info, read top of the file + net/ipv4/netfilter/ip_conntrack_pptp.c + +config ADK_KPACKAGE_KMOD_IP_NF_H323 + tristate 'H.323 protocol support (EXPERIMENTAL)' + depends ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK + help + H.323 is a VoIP signalling protocol from ITU-T. As one of the most + important VoIP protocols, it is widely used by voice hardware and + software including voice gateways, IP phones, Netmeeting, OpenPhone, + Gnomemeeting, etc. + + With this module you can support H.323 on a connection tracking/NAT + firewall. + + This module supports RAS, Fast Start, H.245 Tunnelling, Call + Forwarding, RTP/RTCP and T.120 based audio, video, fax, chat, + whiteboard, file transfer, etc. For more information, please + visit http://nath323.sourceforge.net/. + +config ADK_KPACKAGE_KMOD_IP_NF_SIP + tristate 'SIP protocol support (EXPERIMENTAL)' + depends ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK + help + SIP is an application-layer control protocol that can establish, + modify, and terminate multimedia sessions (conferences) such as + Internet telephony calls. With the ip_conntrack_sip and + the ip_nat_sip modules you can support the protocol on a connection + tracking/NATing firewall. + + +config ADK_KPACKAGE_KMOD_IP_NF_IPTABLES + tristate 'IP tables support (required for filtering/masq/NAT)' + select ADK_KERNEL_NETFILTER_XTABLES + help + iptables is a general, extensible packet identification framework. + The packet filtering and full NAT (masquerading, port forwarding, + etc) subsystems now use this: say `Y' or `M' here if you want to use + either of those. + +config ADK_KPACKAGE_KMOD_IP_NF_FILTER + tristate 'Packet Filtering' + depends ADK_KPACKAGE_KMOD_IP_NF_IPTABLES + help + Packet filtering defines a table `filter', which has a series of + rules for simple packet filtering at local input, forwarding and + local output. See the man page for iptables(8). + +config ADK_KPACKAGE_KMOD_NF_NAT + tristate 'Full NAT' + depends ADK_KPACKAGE_KMOD_IP_NF_IPTABLES + help + The Full NAT option allows masquerading, port forwarding and other + forms of full Network Address Port Translation. It is controlled by + the `nat' table in iptables: see the man page for iptables(8). + +config ADK_KPACKAGE_KMOD_IP_NF_TARGET_MASQUERADE + tristate 'MASQUERADE target support' + depends ADK_KPACKAGE_KMOD_NF_NAT + help + Masquerading is a special case of NAT: all outgoing connections are + changed to seem to come from a particular interface's address, and + if the interface goes down, those connections are lost. This is + only useful for dialup accounts with dynamic IP address (ie. your IP + address will be different on next dialup). + +config ADK_KPACKAGE_KMOD_IP_NF_TARGET_REJECT + tristate 'REJECT target support' + depends ADK_KPACKAGE_KMOD_IP_NF_FILTER + help + The REJECT target allows a filtering rule to specify that an ICMP + error should be issued in response to an incoming packet, rather + than silently being dropped. + +config ADK_KPACKAGE_KMOD_IP_NF_TARGET_LOG + tristate 'LOG target support' + depends ADK_KPACKAGE_KMOD_IP_NF_FILTER + help + This option adds a `LOG' target, which allows you to create rules in + any iptables table which records the packet header to the syslog. + +config ADK_KPACKAGE_KMOD_IP_NF_TARGET_ULOG + tristate 'ULOG target support (ipv4 only)' + depends ADK_KPACKAGE_KMOD_IP_NF_FILTER + help + This option enables the old IPv4-only "ipt_ULOG" implementation + which has been obsoleted by the new "nfnetlink_log" code (see + CONFIG_NETFILTER_NETLINK_LOG). + + This option adds a `ULOG' target, which allows you to create rules in + any iptables table. The packet is passed to a userspace logging + daemon using netlink multicast sockets; unlike the LOG target + which can only be viewed through syslog. + + The appropriate userspace logging daemon (ulogd) may be obtained from + <http://www.gnumonks.org/projects/ulogd/> + +config ADK_KPACKAGE_KMOD_IP_NF_TARGET_REDIRECT + tristate 'REDIRECT target support' + depends ADK_KPACKAGE_KMOD_IP_NF_NAT + help + REDIRECT is a special case of NAT: all incoming connections are + mapped onto the incoming interface's address, causing the packets to + come to the local machine instead of passing through. This is + useful for transparent proxies. + +config ADK_KPACKAGE_KMOD_IP_NF_TARGET_NETMAP + tristate 'NETMAP target support' + depends ADK_KPACKAGE_KMOD_IP_NF_NAT + help + NETMAP is an implementation of static 1:1 NAT mapping of network + addresses. It maps the network address part, while keeping the host + address part intact. It is similar to Fast NAT, except that + Netfilter's connection tracking doesn't work well with Fast NAT. + +config ADK_KPACKAGE_KMOD_IP_NF_TARGET_SAME + tristate 'SAME target support' + depends ADK_KPACKAGE_KMOD_IP_NF_NAT + help + This option adds a `SAME' target, which works like the standard SNAT + target, but attempts to give clients the same IP for all connections. + +config ADK_KPACKAGE_KMOD_IP_NF_MANGLE + tristate 'Packet mangling' + depends ADK_KPACKAGE_KMOD_IP_NF_IPTABLES + help + This option adds a `mangle' table to iptables: see the man page for + iptables(8). This table is used for various packet alterations + which can effect how the packet is routed. + +config ADK_KPACKAGE_KMOD_IP_NF_TARGET_ECN + tristate 'ECN target support' + depends ADK_KPACKAGE_KMOD_IP_NF_MANGLE + help + This option adds a `ECN' target, which can be used in the iptables mangle + table. + + You can use this target to remove the ECN bits from the IPv4 header of + an IP packet. This is particularly useful, if you need to work around + existing ECN blackholes on the internet, but don't want to disable + ECN support in general. + +config ADK_KPACKAGE_KMOD_IP_NF_TARGET_TTL + tristate 'TTL target support' + depends ADK_KPACKAGE_KMOD_IP_NF_MANGLE + help + This option adds a `TTL' target, which enables the user to modify + the TTL value of the IP header. + + While it is safe to decrement/lower the TTL, this target also enables + functionality to increment and set the TTL value of the IP header to + arbitrary values. This is EXTREMELY DANGEROUS since you can easily + create immortal packets that loop forever on the network. + +endmenu +endmenu |