diff options
Diffstat (limited to 'target/foxg20')
| -rw-r--r-- | target/foxg20/Makefile | 43 | ||||
| -rw-r--r-- | target/foxg20/files/etc/network/interfaces | 5 | ||||
| -rw-r--r-- | target/foxg20/kernel.config | 1344 | ||||
| -rw-r--r-- | target/foxg20/patches/foxg20.patch | 471 | ||||
| -rw-r--r-- | target/foxg20/target.mk | 6 | ||||
| -rw-r--r-- | target/foxg20/uclibc.config | 243 |
6 files changed, 0 insertions, 2112 deletions
diff --git a/target/foxg20/Makefile b/target/foxg20/Makefile deleted file mode 100644 index de8724da7..000000000 --- a/target/foxg20/Makefile +++ /dev/null @@ -1,43 +0,0 @@ -# This file is part of the OpenADK project. OpenADK is copyrighted -# material, please see the LICENCE file in the top-level directory. - -include $(TOPDIR)/rules.mk -include $(TOPDIR)/mk/kernel.mk -include $(TOPDIR)/mk/modules.mk -include $(TOPDIR)/mk/kernel-build.mk -include $(TOPDIR)/mk/image.mk - -$(TOOLS_BUILD_DIR): - @mkdir -p $(TOOLS_BUILD_DIR) - -tools-compile: $(TOOLS_BUILD_DIR) - $(MAKE) -C ../tools/uboot-mkimage - -KERNEL:=$(BUILD_DIR)/${ADK_TARGET}-${FS}-kernel -LOADADDR:= 0x20008000 - -kernel-install: tools-compile - @gzip -9 < $(LINUX_DIR)/arch/arm/boot/Image > ${BUILD_DIR}/Image.gz - PATH='${TARGET_PATH}' mkimage -A arm -O linux -T kernel -C gzip \ - -a ${LOADADDR} -e ${LOADADDR} -d ${BUILD_DIR}/Image.gz \ - -n foxg20 $(TARGET_DIR)/boot/vmlinuz-adk $(MAKE_TRACE) - @cp $(TARGET_DIR)/boot/vmlinuz-adk \ - $(BUILD_DIR)/${ADK_TARGET}-${FS}-kernel - -ifeq ($(FS),nfsroot) -imageinstall: kernel-install ${BIN_DIR}/${ROOTFSUSERTARBALL} - @cp $(BUILD_DIR)/${ADK_TARGET}-${FS}-kernel \ - $(BIN_DIR)/${ADK_TARGET}-${FS}-kernel - @echo 'Type dhcp via u-boot prompt to load kernel' - @echo 'After that type bootm to load the kernel' -endif -ifeq ($(FS),ext2-block) -imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSTARBALL) - @echo "The RootFS tarball is:" - @echo "$(BIN_DIR)/$(ROOTFSTARBALL)" - @echo 'Before booting from MicroSD card you need to set following u-boot environment variables:' - @echo "setenv bootcmd 'mmc init; sleep 1; fatload mmc 0 0x22000000 vmlinuz-adk; bootm 0x22000000'" - @echo - @echo "Boot the board via network and use adkinstall." - @echo "If you just want to update, use adkupdate." -endif diff --git a/target/foxg20/files/etc/network/interfaces b/target/foxg20/files/etc/network/interfaces deleted file mode 100644 index 104c1a1b6..000000000 --- a/target/foxg20/files/etc/network/interfaces +++ /dev/null @@ -1,5 +0,0 @@ -auto lo -iface lo inet loopback - -auto eth0 -iface eth0 inet dhcp diff --git a/target/foxg20/kernel.config b/target/foxg20/kernel.config deleted file mode 100644 index 33c2383f3..000000000 --- a/target/foxg20/kernel.config +++ /dev/null @@ -1,1344 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.36 -# Sat Nov 13 02:07:36 2010 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -# CONFIG_ARCH_USES_GETTIMEOFFSET is not set -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -CONFIG_CONSTRUCTORS=y - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_CROSS_COMPILE="" -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_BZIP2=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_KERNEL_GZIP=y -# CONFIG_KERNEL_BZIP2 is not set -# CONFIG_KERNEL_LZMA is not set -# CONFIG_KERNEL_LZO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set - -# -# RCU Subsystem -# -CONFIG_TREE_RCU=y -# CONFIG_TINY_RCU is not set -# CONFIG_RCU_TRACE is not set -CONFIG_RCU_FANOUT=32 -# CONFIG_RCU_FANOUT_EXACT is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -# CONFIG_SYSFS_DEPRECATED_V2 is not set -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_ANON_INODES=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -# CONFIG_BUG is not set -# CONFIG_ELF_CORE is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_PERF_USE_VMALLOC=y - -# -# Kernel Performance Events And Counters -# -# CONFIG_PERF_EVENTS is not set -# CONFIG_PERF_COUNTERS is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_CLK=y - -# -# GCOV-based kernel profiling -# -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_DEFAULT_NOOP=y -CONFIG_DEFAULT_IOSCHED="noop" -# CONFIG_INLINE_SPIN_TRYLOCK is not set -# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set -# CONFIG_INLINE_SPIN_LOCK is not set -# CONFIG_INLINE_SPIN_LOCK_BH is not set -# CONFIG_INLINE_SPIN_LOCK_IRQ is not set -# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set -CONFIG_INLINE_SPIN_UNLOCK=y -# CONFIG_INLINE_SPIN_UNLOCK_BH is not set -CONFIG_INLINE_SPIN_UNLOCK_IRQ=y -# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set -# CONFIG_INLINE_READ_TRYLOCK is not set -# CONFIG_INLINE_READ_LOCK is not set -# CONFIG_INLINE_READ_LOCK_BH is not set -# CONFIG_INLINE_READ_LOCK_IRQ is not set -# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set -CONFIG_INLINE_READ_UNLOCK=y -# CONFIG_INLINE_READ_UNLOCK_BH is not set -CONFIG_INLINE_READ_UNLOCK_IRQ=y -# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set -# CONFIG_INLINE_WRITE_TRYLOCK is not set -# CONFIG_INLINE_WRITE_LOCK is not set -# CONFIG_INLINE_WRITE_LOCK_BH is not set -# CONFIG_INLINE_WRITE_LOCK_IRQ is not set -# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set -CONFIG_INLINE_WRITE_UNLOCK=y -# CONFIG_INLINE_WRITE_UNLOCK_BH is not set -CONFIG_INLINE_WRITE_UNLOCK_IRQ=y -# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set -# CONFIG_MUTEX_SPIN_ON_OWNER is not set -# CONFIG_FREEZER is not set - -# -# System Type -# -CONFIG_MMU=y -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_VEXPRESS is not set -CONFIG_ARCH_AT91=y -# CONFIG_ARCH_BCMRING is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CNS3XXX is not set -# CONFIG_ARCH_GEMINI is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_STMP3XXX is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_DOVE is not set -# CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_LOKI is not set -# CONFIG_ARCH_LPC32XX is not set -# CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_MMP is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_W90X900 is not set -# CONFIG_ARCH_NUC93X is not set -# CONFIG_ARCH_TEGRA is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_SHMOBILE is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_S3C64XX is not set -# CONFIG_ARCH_S5P6440 is not set -# CONFIG_ARCH_S5P6442 is not set -# CONFIG_ARCH_S5PC100 is not set -# CONFIG_ARCH_S5PV210 is not set -# CONFIG_ARCH_S5PV310 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_U300 is not set -# CONFIG_ARCH_U8500 is not set -# CONFIG_ARCH_NOMADIK is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_PLAT_SPEAR is not set -CONFIG_HAVE_AT91_DATAFLASH_CARD=y -CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y -CONFIG_HAVE_AT91_USART3=y -CONFIG_HAVE_AT91_USART4=y -CONFIG_HAVE_AT91_USART5=y - -# -# Atmel AT91 System-on-Chip -# -# CONFIG_ARCH_AT91RM9200 is not set -# CONFIG_ARCH_AT91SAM9260 is not set -# CONFIG_ARCH_AT91SAM9261 is not set -# CONFIG_ARCH_AT91SAM9G10 is not set -# CONFIG_ARCH_AT91SAM9263 is not set -# CONFIG_ARCH_AT91SAM9RL is not set -CONFIG_ARCH_AT91SAM9G20=y -# CONFIG_ARCH_AT91SAM9G45 is not set -# CONFIG_ARCH_AT91CAP9 is not set -# CONFIG_ARCH_AT572D940HF is not set -# CONFIG_ARCH_AT91X40 is not set -CONFIG_AT91_PMC_UNIT=y - -# -# AT91SAM9G20 Board Type -# -# CONFIG_MACH_AT91SAM9G20EK is not set -# CONFIG_MACH_AT91SAM9G20EK_2MMC is not set -# CONFIG_MACH_CPU9G20 is not set -# CONFIG_MACH_PORTUXG20 is not set -# CONFIG_MACH_STAMP9G20 is not set -CONFIG_MACH_FOXG20=y - -# -# AT91SAM9260/AT91SAM9G20 boards -# -# CONFIG_MACH_SNAPPER_9260 is not set - -# -# AT91 Board Options -# -# CONFIG_MTD_AT91_DATAFLASH_CARD is not set -# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set - -# -# AT91 Feature Selections -# -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_AT91_TIMER_HZ=100 -# CONFIG_AT91_EARLY_DBGU is not set -CONFIG_AT91_EARLY_USART0=y -# CONFIG_AT91_EARLY_USART1 is not set -# CONFIG_AT91_EARLY_USART2 is not set -# CONFIG_AT91_EARLY_USART3 is not set -# CONFIG_AT91_EARLY_USART4 is not set -# CONFIG_AT91_EARLY_USART5 is not set - -# -# Processor Type -# -CONFIG_CPU_ARM926T=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_LEGACY=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -CONFIG_ARM_L1_CACHE_SHIFT=5 - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_HIGHMEM is not set -# CONFIG_SPARSE_IRQ is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=999999 -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=0 -CONFIG_VIRT_TO_BUS=y -# CONFIG_KSM is not set -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_UACCESS_WITH_MEMCPY is not set -# CONFIG_CC_STACKPROTECTOR is not set -# CONFIG_DEPRECATED_PARAM_STRUCT is not set - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set -# CONFIG_AUTO_ZRELADDR is not set - -# -# CPU Power Management -# -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -# CONFIG_VFP is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_HAVE_AOUT=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_RDS is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_L2TP is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_PHONET is not set -# CONFIG_IEEE802154 is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -# CONFIG_LIB80211 is not set - -# -# CFG80211 needs to be enabled for MAC80211 -# - -# -# Some wireless drivers require a rate control algorithm -# -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set -# CONFIG_CAIF is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_TESTS is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_ROOTFS_ROOT_DEV=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_SM_FTL is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -CONFIG_MTD_DATAFLASH=y -# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set -# CONFIG_MTD_DATAFLASH_OTP is not set -# CONFIG_MTD_M25P80 is not set -# CONFIG_MTD_SST25L is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND_ECC=y -# CONFIG_MTD_NAND_ECC_SMC is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_SM_COMMON is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_GPIO is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ALAUDA is not set -# CONFIG_MTD_ONENAND is not set - -# -# LPDDR flash memory drivers -# -# CONFIG_MTD_LPDDR is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set - -# -# DRBD disabled because PROC_FS, INET or CONNECTOR not selected -# -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_MG_DISK is not set -CONFIG_MISC_DEVICES=y -# CONFIG_AD525X_DPOT is not set -CONFIG_ATMEL_TCLIB=y -CONFIG_ATMEL_TCB_CLKSRC=y -CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 -CONFIG_ATMEL_SSC=y -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_TI_DAC7512 is not set -# CONFIG_C2PORT is not set - -# -# EEPROM support -# -# CONFIG_EEPROM_AT25 is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_IWMC3200TOP is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI_MOD=y -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_PROC_FS is not set - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -# CONFIG_SCSI_LOWLEVEL is not set -# CONFIG_SCSI_DH is not set -# CONFIG_SCSI_OSD_INITIATOR is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_MICREL_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_ENC28J60 is not set -# CONFIG_ETHOC is not set -# CONFIG_SMC911X is not set -# CONFIG_SMSC911X is not set -# CONFIG_DNET is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_B44 is not set -# CONFIG_KS8851 is not set -# CONFIG_KS8851_MLL is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_WLAN=y -# CONFIG_USB_ZD1201 is not set -# CONFIG_HOSTAP is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_IPHETH is not set -# CONFIG_WAN is not set - -# -# CAIF transport drivers -# -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_DEVKMEM is not set -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_N_GSM is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_SERIAL_ATMEL_PDC=y -# CONFIG_SERIAL_ATMEL_TTYAT is not set -# CONFIG_SERIAL_MAX3100 is not set -# CONFIG_SERIAL_MAX3107 is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_TIMBERDALE is not set -# CONFIG_SERIAL_ALTERA_JTAGUART is not set -# CONFIG_SERIAL_ALTERA_UART is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_RAMOOPS is not set -# CONFIG_I2C is not set -CONFIG_SPI=y -CONFIG_SPI_MASTER=y - -# -# SPI Master Controller Drivers -# -CONFIG_SPI_ATMEL=y -# CONFIG_SPI_BITBANG is not set -# CONFIG_SPI_GPIO is not set -# CONFIG_SPI_XILINX is not set -# CONFIG_SPI_DESIGNWARE is not set - -# -# SPI Protocol Masters -# -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_TLE62X0 is not set - -# -# PPS support -# -# CONFIG_PPS is not set -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y - -# -# Memory mapped GPIO expanders: -# -# CONFIG_GPIO_IT8761E is not set - -# -# I2C GPIO expanders: -# - -# -# PCI GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_GPIO_MAX7301 is not set -# CONFIG_GPIO_MCP23S08 is not set -# CONFIG_GPIO_MC33880 is not set - -# -# AC97 GPIO expanders: -# - -# -# MODULbus GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_MAX63XX_WATCHDOG is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set -# CONFIG_MFD_SUPPORT is not set -# CONFIG_REGULATOR is not set -# CONFIG_MEDIA_SUPPORT is not set - -# -# Graphics support -# -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_SOUND is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -# CONFIG_USB_DEVICEFS is not set -# CONFIG_USB_DEVICE_CLASS is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -# CONFIG_USB_MON is not set -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -# CONFIG_USB_ISP1362_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_HWA_HCD is not set -# CONFIG_USB_MUSB_HDRC is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may -# - -# -# also be needed; see USB_STORAGE Help for more info -# -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -# CONFIG_USB_GPIO_VBUS is not set -# CONFIG_USB_ULPI is not set -# CONFIG_NOP_USB_XCEIV is not set -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -# CONFIG_MMC_UNSAFE_RESUME is not set - -# -# MMC/SD/SDIO Card Drivers -# -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_BOUNCE=y -# CONFIG_SDIO_UART is not set -# CONFIG_MMC_TEST is not set - -# -# MMC/SD/SDIO Host Controller Drivers -# -# CONFIG_MMC_SDHCI is not set -CONFIG_MMC_AT91=y -# CONFIG_MMC_ATMELMCI is not set -# CONFIG_MMC_SPI is not set -# CONFIG_MEMSTICK is not set -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_GPIO_PLATFORM=y -# CONFIG_LEDS_DAC124S085 is not set -# CONFIG_LEDS_LT3593 is not set -# CONFIG_LEDS_TRIGGERS is not set -# CONFIG_ACCESSIBILITY is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y -# CONFIG_RTC_DRV_TEST is not set - -# -# SPI RTC drivers -# -# CONFIG_RTC_DRV_M41T94 is not set -# CONFIG_RTC_DRV_DS1305 is not set -# CONFIG_RTC_DRV_DS1390 is not set -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_R9701 is not set -# CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_DS3234 is not set -# CONFIG_RTC_DRV_PCF2123 is not set - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_MSM6242 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_RP5C01 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_RTC_DRV_AT91SAM9_RTT=0 -CONFIG_RTC_DRV_AT91SAM9_GPBR=0 -# CONFIG_DMADEVICES is not set -# CONFIG_AUXDISPLAY is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -# CONFIG_NILFS2_FS is not set -CONFIG_FILE_LOCKING=y -# CONFIG_FSNOTIFY is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# Caches -# -# CONFIG_FSCACHE is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_YAFFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_LOGFS is not set -# CONFIG_CRAMFS is not set -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CEPH_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -CONFIG_PRINTK_TIME=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -CONFIG_MAGIC_SYSRQ=y -# CONFIG_STRIP_ASM_SYMS is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_HARDLOCKUP_DETECTOR is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -CONFIG_FRAME_POINTER=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_TRACING_SUPPORT=y -# CONFIG_FTRACE is not set -# CONFIG_ATOMIC64_SELFTEST is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_ARM_UNWIND is not set -# CONFIG_DEBUG_USER is not set -# CONFIG_OC_ETM is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -CONFIG_DEFAULT_SECURITY_DAC=y -CONFIG_DEFAULT_SECURITY="" -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_ALGAPI2=m -CONFIG_CRYPTO_RNG=m -CONFIG_CRYPTO_RNG2=m -# CONFIG_CRYPTO_MANAGER is not set -# CONFIG_CRYPTO_MANAGER2 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_VMAC is not set - -# -# Digest -# -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_GHASH is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -CONFIG_CRYPTO_AES=m -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_ZLIB is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -CONFIG_CRYPTO_ANSI_CPRNG=m -CONFIG_CRYPTO_HW=y - -# -# OCF Configuration -# -# CONFIG_OCF_OCF is not set -# CONFIG_BINARY_PRINTF is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_NLATTR=y -CONFIG_GENERIC_ATOMIC64=y diff --git a/target/foxg20/patches/foxg20.patch b/target/foxg20/patches/foxg20.patch deleted file mode 100644 index d564c71fb..000000000 --- a/target/foxg20/patches/foxg20.patch +++ /dev/null @@ -1,471 +0,0 @@ -diff -Nur linux-2.6.34.orig/arch/arm/include/asm/setup.h linux-2.6.34/arch/arm/include/asm/setup.h ---- linux-2.6.34.orig/arch/arm/include/asm/setup.h 2010-05-16 23:17:36.000000000 +0200 -+++ linux-2.6.34/arch/arm/include/asm/setup.h 2010-05-25 20:26:06.083473207 +0200 -@@ -18,6 +18,8 @@ - - #define COMMAND_LINE_SIZE 1024 - -+const char *get_system_type(void); -+ - /* The list ends with an ATAG_NONE node. */ - #define ATAG_NONE 0x00000000 - -diff -Nur linux-2.6.34.orig/arch/arm/Kconfig linux-2.6.34/arch/arm/Kconfig ---- linux-2.6.34.orig/arch/arm/Kconfig 2010-05-16 23:17:36.000000000 +0200 -+++ linux-2.6.34/arch/arm/Kconfig 2010-05-25 20:26:06.103473096 +0200 -@@ -20,6 +20,8 @@ - select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) - select HAVE_GENERIC_DMA_COHERENT - select HAVE_KERNEL_GZIP -+ select HAVE_KERNEL_BZIP2 -+ select HAVE_KERNEL_LZMA - select HAVE_KERNEL_LZO - select HAVE_PERF_EVENTS - select PERF_USE_VMALLOC -diff -Nur linux-2.6.34.orig/arch/arm/kernel/setup.c linux-2.6.34/arch/arm/kernel/setup.c ---- linux-2.6.34.orig/arch/arm/kernel/setup.c 2010-05-16 23:17:36.000000000 +0200 -+++ linux-2.6.34/arch/arm/kernel/setup.c 2010-05-25 20:26:06.150978830 +0200 -@@ -790,8 +790,12 @@ - - static int c_show(struct seq_file *m, void *v) - { -+ unsigned long n = (unsigned long) v - 1; - int i; - -+ if (n == 0) -+ seq_printf(m, "system type\t\t: %s\n", get_system_type()); -+ - seq_printf(m, "Processor\t: %s rev %d (%s)\n", - cpu_name, read_cpuid_id() & 15, elf_platform); - -diff -Nur linux-2.6.34.orig/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6.34/arch/arm/mach-at91/at91sam9260_devices.c ---- linux-2.6.34.orig/arch/arm/mach-at91/at91sam9260_devices.c 2010-05-16 23:17:36.000000000 +0200 -+++ linux-2.6.34/arch/arm/mach-at91/at91sam9260_devices.c 2010-05-25 20:26:06.190979002 +0200 -@@ -454,7 +454,15 @@ - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PA24, - .scl_is_open_drain = 1, -+#if defined(CONFIG_MACH_FOXG20) -+ /* Some I2C devices are limited to 100 kHz and i2c-gpio.h -+ * says "frequency is (500 / udelay) kHz" so 5 is best (and is -+ * used in i2c-gpio.c) -+ */ -+ .udelay = 5, /* ~100 kHz */ -+#else - .udelay = 2, /* ~100 kHz */ -+#endif - }; - - static struct platform_device at91sam9260_twi_device = { -diff -Nur linux-2.6.34.orig/arch/arm/mach-at91/board-foxg20.c linux-2.6.34/arch/arm/mach-at91/board-foxg20.c ---- linux-2.6.34.orig/arch/arm/mach-at91/board-foxg20.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.34/arch/arm/mach-at91/board-foxg20.c 2010-05-25 20:26:06.230978938 +0200 -@@ -0,0 +1,376 @@ -+/* -+ * Copyright (C) 2005 SAN People -+ * Copyright (C) 2008 Atmel -+ * Copyright (C) 2010 Lee McLoughlin - lee@lmmrtech.com -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#include <linux/types.h> -+#include <linux/init.h> -+#include <linux/mm.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/spi/spi.h> -+#include <linux/spi/at73c213.h> -+#include <linux/gpio_keys.h> -+#include <linux/input.h> -+#include <linux/clk.h> -+#include <linux/w1-gpio.h> -+ -+#include <mach/hardware.h> -+#include <asm/setup.h> -+#include <asm/mach-types.h> -+#include <asm/irq.h> -+ -+#include <asm/mach/arch.h> -+#include <asm/mach/map.h> -+#include <asm/mach/irq.h> -+ -+#include <mach/board.h> -+#include <mach/gpio.h> -+#include <mach/at91sam9_smc.h> -+ -+#include "sam9_smc.h" -+#include "generic.h" -+ -+/* -+ * The FOX hardware comes as the "Netus" board with just the cpu, ram, -+ * dataflash and two header connectors. This is plugged into the Fox board -+ * which provides the ethernet, usb, rtc, leds, switch, ... -+ * Other version of the Fox board are planned which could contain -+ * both NAND and sound (WM8731). -+ * -+ * By default USART4 and USART5 are not enabled (freeing up those pins -+ * for general use) -+ * -+ * Note: Enabling the NAND without a NAND device present doesn't cause -+ * any issues as on boot the probe will fail. -+ */ -+/* #define FOXG20_NAND */ -+/* #define FOXG20_WM8731 */ -+/* #define FOX_USART4 */ -+/* #define FOX_USART5 */ -+ -+const char *get_system_type(void) -+{ -+ return "FoxBoard FOXG20"; -+} -+ -+static void __init foxg20_map_io(void) -+{ -+ /* Initialize processor: 18.432 MHz crystal */ -+ at91sam9260_initialize(18432000); -+ -+ /* DBGU on ttyS0. (Rx & Tx only) */ -+ at91_register_uart(0, 0, 0); -+ -+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ -+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS -+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD -+ | ATMEL_UART_RI); -+ -+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ -+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); -+ -+ /* USART2 on ttyS3. (Rx & Tx only) */ -+ at91_register_uart(AT91SAM9260_ID_US2, 3, 0); -+ -+ /* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */ -+ at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_CTS | ATMEL_UART_RTS); -+ -+#if defined(FOX_USART4) -+ /* USART4 on ttyS5. (Rx & Tx only) */ -+ at91_register_uart(AT91SAM9260_ID_US4, 5, 0); -+#endif -+ -+#if defined(FOX_USART5) -+ /* USART5 on ttyS6. (Rx & Tx only) */ -+ at91_register_uart(AT91SAM9260_ID_US5, 6, 0); -+#endif -+ -+ /* set serial console to ttyS0 (ie, DBGU) */ -+ at91_set_serial_console(0); -+} -+ -+static void __init foxg20_init_irq(void) -+{ -+ at91sam9260_init_interrupts(NULL); -+} -+ -+ -+/* -+ * USB Host port -+ */ -+static struct at91_usbh_data __initdata foxg20_usbh_data = { -+ .ports = 2, -+}; -+ -+/* -+ * USB Device port -+ */ -+static struct at91_udc_data __initdata foxg20_udc_data = { -+ .vbus_pin = AT91_PIN_PC6, -+ .pullup_pin = 0, /* pull-up driven by UDC */ -+}; -+ -+ -+/* -+ * SPI devices. -+ */ -+static struct spi_board_info foxg20_spi_devices[] = { -+#if !defined(CONFIG_MMC_AT91) -+ { -+ .modalias = "mtd_dataflash", -+ .chip_select = 1, -+ .max_speed_hz = 15 * 1000 * 1000, -+ .bus_num = 0, -+ }, -+#endif -+}; -+ -+ -+/* -+ * MACB Ethernet device -+ */ -+static struct at91_eth_data __initdata foxg20_macb_data = { -+ .phy_irq_pin = AT91_PIN_PA7, -+ .is_rmii = 1, -+}; -+ -+ -+#ifdef FOXG20_NAND -+/* The Fox doesn't have NAND memory */ -+/* -+ * NAND flash -+ */ -+static struct mtd_partition __initdata foxg20_nand_partition[] = { -+ { -+ .name = "Bootstrap", -+ .offset = 0, -+ .size = 4 * SZ_1M, -+ }, -+ { -+ .name = "Partition 1", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = 60 * SZ_1M, -+ }, -+ { -+ .name = "Partition 2", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = MTDPART_SIZ_FULL, -+ }, -+}; -+ -+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -+{ -+ *num_partitions = ARRAY_SIZE(foxg20_nand_partition); -+ return foxg20_nand_partition; -+} -+ -+/* det_pin is not connected */ -+static struct atmel_nand_data __initdata foxg20_nand_data = { -+ .ale = 21, -+ .cle = 22, -+ .rdy_pin = AT91_PIN_PC13, -+ .enable_pin = AT91_PIN_PC14, -+ .partition_info = nand_partitions, -+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) -+ .bus_width_16 = 1, -+#else -+ .bus_width_16 = 0, -+#endif -+}; -+ -+static struct sam9_smc_config __initdata foxg20_nand_smc_config = { -+ .ncs_read_setup = 0, -+ .nrd_setup = 2, -+ .ncs_write_setup = 0, -+ .nwe_setup = 2, -+ -+ .ncs_read_pulse = 4, -+ .nrd_pulse = 4, -+ .ncs_write_pulse = 4, -+ .nwe_pulse = 4, -+ -+ .read_cycle = 7, -+ .write_cycle = 7, -+ -+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, -+ .tdf_cycles = 3, -+}; -+ -+static void __init foxg20_add_device_nand(void) -+{ -+ /* setup bus-width (8 or 16) */ -+ if (foxg20_nand_data.bus_width_16) -+ foxg20_nand_smc_config.mode |= AT91_SMC_DBW_16; -+ else -+ foxg20_nand_smc_config.mode |= AT91_SMC_DBW_8; -+ -+ /* configure chip-select 3 (NAND) */ -+ sam9_smc_configure(3, &foxg20_nand_smc_config); -+ -+ at91_add_device_nand(&foxg20_nand_data); -+} -+#endif -+ -+ -+/* -+ * MCI (SD/MMC) -+ * det_pin, wp_pin and vcc_pin are not connected -+ */ -+static struct at91_mmc_data __initdata foxg20_mmc_data = { -+ .slot_b = 1, -+ .wire4 = 1, -+}; -+ -+ -+/* -+ * LEDs -+ */ -+static struct gpio_led foxg20_leds[] = { -+ { /* user led, red */ -+ .name = "user_led", -+ .gpio = AT91_PIN_PC7, -+ .active_low = 0, -+ .default_trigger = "heartbeat", -+ }, -+}; -+ -+ -+/* -+ * GPIO Buttons -+ */ -+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -+static struct gpio_keys_button foxg20_buttons[] = { -+ { -+ .gpio = AT91_PIN_PC4, -+ .code = BTN_1, -+ .desc = "Button 1", -+ .active_low = 1, -+ .wakeup = 1, -+ }, -+}; -+ -+static struct gpio_keys_platform_data foxg20_button_data = { -+ .buttons = foxg20_buttons, -+ .nbuttons = ARRAY_SIZE(foxg20_buttons), -+}; -+ -+static struct platform_device foxg20_button_device = { -+ .name = "gpio-keys", -+ .id = -1, -+ .num_resources = 0, -+ .dev = { -+ .platform_data = &foxg20_button_data, -+ } -+}; -+ -+static void __init foxg20_add_device_buttons(void) -+{ -+ at91_set_gpio_input(AT91_PIN_PC4, 1); /* btn1 */ -+ at91_set_deglitch(AT91_PIN_PC4, 1); -+ -+ platform_device_register(&foxg20_button_device); -+} -+#else -+static void __init foxg20_add_device_buttons(void) {} -+#endif -+ -+ -+#if !defined(FOXG20_WM8731) -+#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE) -+static struct w1_gpio_platform_data w1_gpio_pdata = { -+ /* If you choose to use a pin other than PB16 it needs to be 3.3V */ -+ .pin = AT91_PIN_PB16, -+ .is_open_drain = 1, -+}; -+ -+static struct platform_device w1_device = { -+ .name = "w1-gpio", -+ .id = -1, -+ .dev.platform_data = &w1_gpio_pdata, -+}; -+ -+static void __init at91_add_device_w1(void) -+{ -+ at91_set_GPIO_periph(w1_gpio_pdata.pin, 1); -+ at91_set_multi_drive(w1_gpio_pdata.pin, 1); -+ platform_device_register(&w1_device); -+} -+ -+#endif -+#endif -+ -+ -+static struct i2c_board_info __initdata foxg20_i2c_devices[] = { -+ { -+ I2C_BOARD_INFO("24c512", 0x50), -+#ifdef FOXG20_WM8731 -+ I2C_BOARD_INFO("wm8731", 0x1b), -+#endif -+ }, -+}; -+ -+ -+static void __init foxg20_board_init(void) -+{ -+ /* Serial */ -+ at91_add_device_serial(); -+ /* USB Host */ -+ at91_add_device_usbh(&foxg20_usbh_data); -+ /* USB Device */ -+ at91_add_device_udc(&foxg20_udc_data); -+ /* SPI */ -+ at91_add_device_spi(foxg20_spi_devices, ARRAY_SIZE(foxg20_spi_devices)); -+#ifdef FOXG20_NAND -+ /* The Fox doesn't have NAND memory */ -+ /* NAND */ -+ foxg20_add_device_nand(); -+#endif -+ /* Ethernet */ -+ at91_add_device_eth(&foxg20_macb_data); -+ /* MMC */ -+ at91_add_device_mmc(0, &foxg20_mmc_data); -+ /* I2C */ -+ at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices)); -+ /* LEDs */ -+ at91_gpio_leds(foxg20_leds, ARRAY_SIZE(foxg20_leds)); -+ /* Push Buttons */ -+ foxg20_add_device_buttons(); -+#ifdef FOXG20_WM8731 -+ /* The Fox doesn't have this sound chip */ -+ /* PCK0 provides MCLK to the WM8731 */ -+ at91_set_B_periph(AT91_PIN_PC1, 0); -+ /* SSC (for WM8731) */ -+ at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); -+#else -+#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE) -+ at91_add_device_w1(); -+#endif -+#endif -+} -+ -+MACHINE_START(AT91SAM9G20EK, "Acme Systems FOXG20") -+ /* Maintainer: Lee McLoughlin */ -+ .phys_io = AT91_BASE_SYS, -+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, -+ .boot_params = AT91_SDRAM_BASE + 0x100, -+ .timer = &at91sam926x_timer, -+ .map_io = foxg20_map_io, -+ .init_irq = foxg20_init_irq, -+ .init_machine = foxg20_board_init, -+MACHINE_END -diff -Nur linux-2.6.34.orig/arch/arm/mach-at91/Kconfig linux-2.6.34/arch/arm/mach-at91/Kconfig ---- linux-2.6.34.orig/arch/arm/mach-at91/Kconfig 2010-05-16 23:17:36.000000000 +0200 -+++ linux-2.6.34/arch/arm/mach-at91/Kconfig 2010-05-25 20:26:06.270978491 +0200 -@@ -360,6 +360,15 @@ - Select this if you are using a Eukrea Electromatique's - CPU9G20 Board <http://www.eukrea.com/> - -+config MACH_FOXG20 -+ bool "Acme Systems FOX G20" -+ select HAVE_AT91_DATAFLASH_CARD -+ select HAVE_NAND_ATMEL_BUSWIDTH_16 -+ depends on ARCH_AT91SAM9G20 -+ help -+ Select this if you are using Acme Systems -+ FOX Board G20 <http://netus.acmesystems.it> -+ - endif - - # ---------------------------------------------------------- -diff -Nur linux-2.6.34.orig/arch/arm/mach-at91/Makefile linux-2.6.34/arch/arm/mach-at91/Makefile ---- linux-2.6.34.orig/arch/arm/mach-at91/Makefile 2010-05-16 23:17:36.000000000 +0200 -+++ linux-2.6.34/arch/arm/mach-at91/Makefile 2010-05-25 20:26:06.310978635 +0200 -@@ -67,6 +67,9 @@ - # AT91SAM9G45 board-specific support - obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o - -+# FOXG20 board-specific support -+obj-$(CONFIG_MACH_FOXG20) += board-foxg20.o -+ - # AT91CAP9 board-specific support - obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o - diff --git a/target/foxg20/target.mk b/target/foxg20/target.mk deleted file mode 100644 index 5fd00b47f..000000000 --- a/target/foxg20/target.mk +++ /dev/null @@ -1,6 +0,0 @@ -# arm default is little endian, this target uses EABI -include $(TOPDIR)/mk/kernel-ver.mk -ARCH:= arm -CPU_ARCH:= arm -TARGET_OPTIMIZATION:= -Os -pipe -TARGET_CFLAGS_ARCH:= -march=armv5te -mtune=arm926ej-s diff --git a/target/foxg20/uclibc.config b/target/foxg20/uclibc.config deleted file mode 100644 index ed774f20f..000000000 --- a/target/foxg20/uclibc.config +++ /dev/null @@ -1,243 +0,0 @@ -# -# Automatically generated make config: don't edit -# Version: 0.9.30.3 -# Sat May 1 19:16:40 2010 -# -# TARGET_alpha is not set -TARGET_arm=y -# TARGET_avr32 is not set -# TARGET_bfin is not set -# TARGET_cris is not set -# TARGET_e1 is not set -# TARGET_frv is not set -# TARGET_h8300 is not set -# TARGET_hppa is not set -# TARGET_i386 is not set -# TARGET_i960 is not set -# TARGET_ia64 is not set -# TARGET_m68k is not set -# TARGET_microblaze is not set -# TARGET_mips is not set -# TARGET_nios is not set -# TARGET_nios2 is not set -# TARGET_powerpc is not set -# TARGET_sh is not set -# TARGET_sh64 is not set -# TARGET_sparc is not set -# TARGET_v850 is not set -# TARGET_vax is not set -# TARGET_x86_64 is not set -# TARGET_xtensa is not set - -# -# Target Architecture Features and Options -# -TARGET_ARCH="arm" -FORCE_OPTIONS_FOR_ARCH=y -# CONFIG_ARM_OABI is not set -CONFIG_ARM_EABI=y -CONFIG_GENERIC_ARM=y -# CONFIG_ARM610 is not set -# CONFIG_ARM710 is not set -# CONFIG_ARM7TDMI is not set -# CONFIG_ARM720T is not set -# CONFIG_ARM920T is not set -# CONFIG_ARM922T is not set -# CONFIG_ARM926T is not set -# CONFIG_ARM10T is not set -# CONFIG_ARM1136JF_S is not set -# CONFIG_ARM1176JZ_S is not set -# CONFIG_ARM1176JZF_S is not set -# CONFIG_ARM_CORTEX_M3 is not set -# CONFIG_ARM_CORTEX_M1 is not set -# CONFIG_ARM_SA110 is not set -# CONFIG_ARM_SA1100 is not set -# CONFIG_ARM_XSCALE is not set -# CONFIG_ARM_IWMMXT is not set -TARGET_SUBARCH="" - -# -# Using ELF file format -# -ARCH_ANY_ENDIAN=y -ARCH_LITTLE_ENDIAN=y -# ARCH_WANTS_BIG_ENDIAN is not set -ARCH_WANTS_LITTLE_ENDIAN=y -ARCH_HAS_MMU=y -ARCH_USE_MMU=y -UCLIBC_HAS_FLOATS=y -# UCLIBC_HAS_FPU is not set -UCLIBC_HAS_SOFT_FLOAT=y -DO_C99_MATH=y -UCLIBC_HAS_FENV=y -KERNEL_HEADERS="" -HAVE_DOT_CONFIG=y - -# -# General Library Settings -# -# HAVE_NO_PIC is not set -DOPIC=y -# ARCH_HAS_NO_SHARED is not set -# ARCH_HAS_NO_LDSO is not set -HAVE_SHARED=y -# FORCE_SHAREABLE_TEXT_SEGMENTS is not set -LDSO_LDD_SUPPORT=y -LDSO_CACHE_SUPPORT=y -# LDSO_PRELOAD_FILE_SUPPORT is not set -LDSO_BASE_FILENAME="ld.so" -# UCLIBC_STATIC_LDCONFIG is not set -# LDSO_RUNPATH is not set -UCLIBC_CTOR_DTOR=y -# LDSO_GNU_HASH_SUPPORT is not set -# HAS_NO_THREADS is not set -UCLIBC_HAS_THREADS=y -PTHREADS_DEBUG_SUPPORT=y -LINUXTHREADS_OLD=y -UCLIBC_HAS_SYSLOG=y -UCLIBC_HAS_LFS=y -# MALLOC is not set -# MALLOC_SIMPLE is not set -MALLOC_STANDARD=y -MALLOC_GLIBC_COMPAT=y -UCLIBC_DYNAMIC_ATEXIT=y -COMPAT_ATEXIT=y -# UCLIBC_SUSV3_LEGACY is not set -# UCLIBC_SUSV3_LEGACY_MACROS is not set -# UCLIBC_HAS_STUBS is not set -UCLIBC_HAS_SHADOW=y -UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y -UCLIBC_HAS___PROGNAME=y -UCLIBC_HAS_PTY=y -ASSUME_DEVPTS=y -UNIX98PTY_ONLY=y -# UCLIBC_HAS_GETPT is not set -UCLIBC_HAS_TM_EXTENSIONS=y -UCLIBC_HAS_TZ_CACHING=y -UCLIBC_HAS_TZ_FILE=y -UCLIBC_HAS_TZ_FILE_READ_MANY=y -UCLIBC_TZ_FILE_PATH="/etc/TZ" - -# -# Advanced Library Settings -# -UCLIBC_PWD_BUFFER_SIZE=256 -UCLIBC_GRP_BUFFER_SIZE=256 - -# -# Support various families of functions -# -# UCLIBC_LINUX_MODULE_24 is not set -UCLIBC_LINUX_SPECIFIC=y -UCLIBC_HAS_GNU_ERROR=y -UCLIBC_BSD_SPECIFIC=y -UCLIBC_HAS_BSD_ERR=y -# UCLIBC_HAS_OBSOLETE_BSD_SIGNAL is not set -# UCLIBC_HAS_OBSOLETE_SYSV_SIGNAL is not set -# UCLIBC_NTP_LEGACY is not set -# UCLIBC_SV4_DEPRECATED is not set -UCLIBC_HAS_REALTIME=y -UCLIBC_HAS_ADVANCED_REALTIME=y -UCLIBC_HAS_EPOLL=y -UCLIBC_HAS_XATTR=y -# UCLIBC_HAS_PROFILING is not set -UCLIBC_HAS_CRYPT_IMPL=y -UCLIBC_HAS_CRYPT=y -UCLIBC_HAS_NETWORK_SUPPORT=y -UCLIBC_HAS_SOCKET=y -UCLIBC_HAS_IPV4=y -UCLIBC_HAS_IPV6=y -UCLIBC_HAS_RPC=y -UCLIBC_HAS_FULL_RPC=y -UCLIBC_HAS_REENTRANT_RPC=y -UCLIBC_USE_NETLINK=y -UCLIBC_SUPPORT_AI_ADDRCONFIG=y -UCLIBC_HAS_BSD_RES_CLOSE=y - -# -# String and Stdio Support -# -UCLIBC_HAS_STRING_GENERIC_OPT=y -UCLIBC_HAS_STRING_ARCH_OPT=y -UCLIBC_HAS_CTYPE_TABLES=y -UCLIBC_HAS_CTYPE_SIGNED=y -# UCLIBC_HAS_CTYPE_UNSAFE is not set -UCLIBC_HAS_CTYPE_CHECKED=y -# UCLIBC_HAS_CTYPE_ENFORCED is not set -UCLIBC_HAS_WCHAR=y -# UCLIBC_HAS_LOCALE is not set -UCLIBC_HAS_HEXADECIMAL_FLOATS=y -UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y -UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9 -UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y -# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set -# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set -# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set -# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set -# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set -UCLIBC_HAS_STDIO_BUFSIZ_4096=y -# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set -UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y -# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set -# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set -# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set -UCLIBC_HAS_STDIO_GETC_MACRO=y -UCLIBC_HAS_STDIO_PUTC_MACRO=y -UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y -# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set -UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y -UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y -UCLIBC_HAS_PRINTF_M_SPEC=y -UCLIBC_HAS_ERRNO_MESSAGES=y -# UCLIBC_HAS_SYS_ERRLIST is not set -UCLIBC_HAS_SIGNUM_MESSAGES=y -# UCLIBC_HAS_SYS_SIGLIST is not set -UCLIBC_HAS_GNU_GETOPT=y -UCLIBC_HAS_GNU_GETSUBOPT=y - -# -# Big and Tall -# -UCLIBC_HAS_REGEX=y -UCLIBC_HAS_REGEX_OLD=y -UCLIBC_HAS_FNMATCH=y -UCLIBC_HAS_FNMATCH_OLD=y -UCLIBC_HAS_WORDEXP=y -UCLIBC_HAS_FTW=y -UCLIBC_HAS_GLOB=y -UCLIBC_HAS_GNU_GLOB=y - -# -# Library Installation Options -# -SHARED_LIB_LOADER_PREFIX="$(RUNTIME_PREFIX)lib" -RUNTIME_PREFIX="/" -DEVEL_PREFIX="/usr/" - -# -# Security options -# -# UCLIBC_BUILD_PIE is not set -UCLIBC_HAS_ARC4RANDOM=y -# HAVE_NO_SSP is not set -# UCLIBC_HAS_SSP is not set -UCLIBC_BUILD_RELRO=y -# UCLIBC_BUILD_NOW is not set -UCLIBC_BUILD_NOEXECSTACK=y - -# -# uClibc development/debugging options -# -CROSS_COMPILER_PREFIX="" -UCLIBC_EXTRA_CFLAGS="" -# DODEBUG is not set -# DODEBUG_PT is not set -DOSTRIP=y -# DOASSERTS is not set -# SUPPORT_LD_DEBUG is not set -# SUPPORT_LD_DEBUG_EARLY is not set -# UCLIBC_MALLOC_DEBUGGING is not set -WARNINGS="-Wall" -# EXTRA_WARNINGS is not set -# DOMULTI is not set -# UCLIBC_MJN3_ONLY is not set |