diff options
Diffstat (limited to 'target/ag241')
| -rw-r--r-- | target/ag241/Makefile | 50 | ||||
| -rw-r--r-- | target/ag241/files/etc/inittab | 3 | ||||
| -rw-r--r-- | target/ag241/files/etc/network/interfaces | 9 | ||||
| -rw-r--r-- | target/ag241/kernel.config | 918 | ||||
| -rw-r--r-- | target/ag241/patches/ar7.patch | 90 | ||||
| -rw-r--r-- | target/ag241/target.mk | 5 | ||||
| -rw-r--r-- | target/ag241/tools/addpattern/Makefile | 4 | ||||
| -rw-r--r-- | target/ag241/tools/addpattern/addpattern.c | 255 | ||||
| -rw-r--r-- | target/ag241/tools/rules.mk | 7 | ||||
| -rw-r--r-- | target/ag241/tools/srec2bin/Makefile | 4 | ||||
| -rw-r--r-- | target/ag241/tools/srec2bin/srec2bin.c | 524 | ||||
| -rw-r--r-- | target/ag241/uclibc.config | 233 |
12 files changed, 0 insertions, 2102 deletions
diff --git a/target/ag241/Makefile b/target/ag241/Makefile deleted file mode 100644 index ac95593fb..000000000 --- a/target/ag241/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# This file is part of the OpenADK project. OpenADK is copyrighted -# material, please see the LICENCE file in the top-level directory. - -include $(TOPDIR)/rules.mk -include $(TOPDIR)/mk/kernel.mk -include $(TOPDIR)/mk/modules.mk -include $(TOPDIR)/mk/kernel-build.mk -include $(TOPDIR)/mk/image.mk - -$(TOOLS_BUILD_DIR): - mkdir -p $(TOOLS_BUILD_DIR) - -tools-compile: $(TOOLS_BUILD_DIR) - $(MAKE) -C tools/addpattern - $(MAKE) -C tools/srec2bin - $(MAKE) -C ../tools/squashfs prepare compile install - -kernel-install: tools-compile - ${TARGET_CROSS}objcopy -S -O srec $(LINUX_DIR)/vmlinuz \ - $(LINUX_DIR)/vmlinux.srec - PATH='${TARGET_PATH}' \ - srec2bin $(LINUX_DIR)/vmlinux.srec $(LINUX_DIR)/vmlinux.bin - (dd if=/dev/zero bs=16 count=1; cat $(LINUX_DIR)/vmlinux.bin) > \ - $(LINUX_DIR)/vmlinux.tmp - PATH='${TARGET_PATH}' \ - addpattern -p AG3B -b -r 2.0 -i $(LINUX_DIR)/vmlinux.tmp \ - -o $(BIN_DIR)/${ADK_TARGET}-${FS}-kernel 2>/dev/null - -ifeq ($(FS),squashfs) -imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSSQUASHFS) - @if [ $$(stat --format=%s ${BUILD_DIR}/${ROOTFSSQUASHFS}) -gt 3801088 ];then \ - echo 'Image is too big!'; \ - else \ - ${CP} ${BUILD_DIR}/${ROOTFSSQUASHFS} ${BIN_DIR}/${ROOTFSSQUASHFS}; \ - echo The image file is $(ROOTFSSQUASHFS); \ - echo 'You can flash the image via tftp:'; \ - echo 'tftp 192.168.1.1'; \ - echo 'tftp> binary'; \ - echo "tftp> put $(ROOTFSSQUASHFS) upgrade_code.bin"; \ - fi -endif -ifeq ($(FS),nfsroot) -imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSUSERTARBALL) - @echo 'The kernel file is: ${BIN_DIR}/${ADK_TARGET}-${FS}-kernel' - @echo 'The nfs root tarball is: ${BIN_DIR}/${ROOTFSUSERTARBALL}' - @echo 'You can flash the kernel via tftp:' - @echo 'tftp 192.168.1.1' - @echo 'tftp> binary' - @echo 'tftp> put ${ADK_TARGET}-${FS}-kernel upgrade_code.bin' -endif diff --git a/target/ag241/files/etc/inittab b/target/ag241/files/etc/inittab deleted file mode 100644 index 4566ae3e8..000000000 --- a/target/ag241/files/etc/inittab +++ /dev/null @@ -1,3 +0,0 @@ -::sysinit:/etc/init.d/rcS -::shutdown:/etc/init.d/rcK -ttyS0::respawn:/sbin/getty -i -L ttyS0 38400 vt100 diff --git a/target/ag241/files/etc/network/interfaces b/target/ag241/files/etc/network/interfaces deleted file mode 100644 index 519928df9..000000000 --- a/target/ag241/files/etc/network/interfaces +++ /dev/null @@ -1,9 +0,0 @@ -auto lo -iface lo inet loopback - -auto nas0 -iface nas0 inet manual - -auto br0 -iface br0 inet manual - bridge-ports eth0 nas0 diff --git a/target/ag241/kernel.config b/target/ag241/kernel.config deleted file mode 100644 index ab0ba7236..000000000 --- a/target/ag241/kernel.config +++ /dev/null @@ -1,918 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.33.1 -# Sun Mar 28 22:44:19 2010 -# -CONFIG_MIPS=y - -# -# Machine selection -# -# CONFIG_MACH_ALCHEMY is not set -CONFIG_AR7=y -# CONFIG_BCM47XX is not set -# CONFIG_BCM63XX is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set -# CONFIG_MACH_LOONGSON is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_NEC_MARKEINS is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_NXP_STB220 is not set -# CONFIG_NXP_STB225 is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_POWERTV is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SNI_RM is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MIKROTIK_RB532 is not set -# CONFIG_WR_PPMC is not set -# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set -# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set -# CONFIG_ALCHEMY_GPIO_INDIRECT is not set -CONFIG_LOONGSON_UART_BASE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CEVT_R4K=y -CONFIG_CSRC_R4K_LIB=y -CONFIG_CSRC_R4K=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_GPIO=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_BOOT_ELF32=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_LOONGSON2E is not set -# CONFIG_CPU_LOONGSON2F is not set -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R5500 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -# CONFIG_CPU_CAVIUM_OCTEON is not set -CONFIG_SYS_SUPPORTS_ZBOOT=y -CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPSR1=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_HARDWARE_WATCHPOINTS=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_32KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=0 -CONFIG_VIRT_TO_BUS=y -# CONFIG_KSM is not set -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 -CONFIG_TICK_ONESHOT=y -# CONFIG_NO_HZ is not set -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_48 is not set -CONFIG_HZ_100=y -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -# CONFIG_HZ_1000 is not set -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=100 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_KEXEC is not set -# CONFIG_SECCOMP is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -CONFIG_CONSTRUCTORS=y - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_BZIP2=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_LZO=y -# CONFIG_KERNEL_GZIP is not set -# CONFIG_KERNEL_BZIP2 is not set -CONFIG_KERNEL_LZMA=y -# CONFIG_KERNEL_LZO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set - -# -# RCU Subsystem -# -CONFIG_TREE_RCU=y -# CONFIG_TREE_PREEMPT_RCU is not set -# CONFIG_TINY_RCU is not set -# CONFIG_RCU_TRACE is not set -CONFIG_RCU_FANOUT=32 -# CONFIG_RCU_FANOUT_EXACT is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set -# CONFIG_SYSFS_DEPRECATED_V2 is not set -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_ANON_INODES=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -# CONFIG_BUG is not set -# CONFIG_ELF_CORE is not set -# CONFIG_PCSPKR_PLATFORM is not set -CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -# CONFIG_AIO is not set - -# -# Kernel Performance Events And Counters -# -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y - -# -# GCOV-based kernel profiling -# -# CONFIG_SLOW_WORK is not set -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_SLABINFO=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_IOSCHED_CFQ is not set -CONFIG_DEFAULT_DEADLINE=y -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="deadline" -# CONFIG_INLINE_SPIN_TRYLOCK is not set -# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set -# CONFIG_INLINE_SPIN_LOCK is not set -# CONFIG_INLINE_SPIN_LOCK_BH is not set -# CONFIG_INLINE_SPIN_LOCK_IRQ is not set -# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set -CONFIG_INLINE_SPIN_UNLOCK=y -# CONFIG_INLINE_SPIN_UNLOCK_BH is not set -CONFIG_INLINE_SPIN_UNLOCK_IRQ=y -# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set -# CONFIG_INLINE_READ_TRYLOCK is not set -# CONFIG_INLINE_READ_LOCK is not set -# CONFIG_INLINE_READ_LOCK_BH is not set -# CONFIG_INLINE_READ_LOCK_IRQ is not set -# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set -CONFIG_INLINE_READ_UNLOCK=y -# CONFIG_INLINE_READ_UNLOCK_BH is not set -CONFIG_INLINE_READ_UNLOCK_IRQ=y -# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set -# CONFIG_INLINE_WRITE_TRYLOCK is not set -# CONFIG_INLINE_WRITE_LOCK is not set -# CONFIG_INLINE_WRITE_LOCK_BH is not set -# CONFIG_INLINE_WRITE_LOCK_IRQ is not set -# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set -CONFIG_INLINE_WRITE_UNLOCK=y -# CONFIG_INLINE_WRITE_UNLOCK_BH is not set -CONFIG_INLINE_WRITE_UNLOCK_IRQ=y -# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set -# CONFIG_MUTEX_SPIN_ON_OWNER is not set -# CONFIG_FREEZER is not set - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_MMU=y -# CONFIG_PCCARD is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_HAVE_AOUT is not set -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_PM is not set -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -CONFIG_INET_LRO=y -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_RDS is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_PHONET is not set -# CONFIG_IEEE802154 is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -# CONFIG_LIB80211 is not set - -# -# CFG80211 needs to be enabled for MAC80211 -# -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_TESTS is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_ROOTFS_ROOT_DEV=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_AR7_PARTS=y - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=y -# CONFIG_MTD_PHYSMAP_COMPAT is not set -# CONFIG_MTD_GPIO_ADDR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# LPDDR flash memory drivers -# -# CONFIG_MTD_LPDDR is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set - -# -# DRBD disabled because PROC_FS, INET or CONNECTOR not selected -# -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -CONFIG_PHYLIB=y -# CONFIG_SWCONFIG is not set - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -CONFIG_FIXED_PHY=y -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_ETHOC is not set -# CONFIG_SMSC911X is not set -# CONFIG_DNET is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_B44 is not set -# CONFIG_KS8842 is not set -# CONFIG_KS8851_MLL is not set -CONFIG_CPMAC=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_WLAN=y -# CONFIG_HOSTAP is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_DEVKMEM is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set - -# -# PPS support -# -# CONFIG_PPS is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_AR7_WDT=y -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_REGULATOR is not set -# CONFIG_MEDIA_SUPPORT is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set -# CONFIG_AUXDISPLAY is not set -# CONFIG_UIO is not set - -# -# TI VLYNQ -# -CONFIG_VLYNQ=y -# CONFIG_STAGING is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -# CONFIG_NILFS2_FS is not set -# CONFIG_AUFS_FS is not set -CONFIG_FILE_LOCKING=y -# CONFIG_FSNOTIFY is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY is not set -# CONFIG_INOTIFY_USER is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# Caches -# -# CONFIG_FSCACHE is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -CONFIG_PROC_SYSCTL=y -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NETWORK_FILESYSTEMS=y -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_PRINTK_TIME=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=2048 -CONFIG_MAGIC_SYSRQ=y -# CONFIG_STRIP_ASM_SYMS is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_TRACING_SUPPORT=y -# CONFIG_FTRACE is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_EARLY_PRINTK=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="cpmac.dumb_switch=1" -# CONFIG_CMDLINE_OVERRIDE is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_DEFAULT_SECURITY_SELINUX is not set -# CONFIG_DEFAULT_SECURITY_SMACK is not set -# CONFIG_DEFAULT_SECURITY_TOMOYO is not set -CONFIG_DEFAULT_SECURITY_DAC=y -CONFIG_DEFAULT_SECURITY="" -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_MANAGER is not set -# CONFIG_CRYPTO_MANAGER2 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_VMAC is not set - -# -# Digest -# -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_GHASH is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_ZLIB is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set - -# -# OCF Configuration -# -# CONFIG_OCF_OCF is not set -# CONFIG_BINARY_PRINTF is not set - -# -# Library routines -# -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -# CONFIG_CRC32 is not set -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_NLATTR=y diff --git a/target/ag241/patches/ar7.patch b/target/ag241/patches/ar7.patch deleted file mode 100644 index dcaaa2ec7..000000000 --- a/target/ag241/patches/ar7.patch +++ /dev/null @@ -1,90 +0,0 @@ -diff -Nur linux-2.6.34.orig/arch/mips/ar7/prom.c linux-2.6.34/arch/mips/ar7/prom.c ---- linux-2.6.34.orig/arch/mips/ar7/prom.c 2010-05-16 23:17:36.000000000 +0200 -+++ linux-2.6.34/arch/mips/ar7/prom.c 2010-05-28 15:52:26.960965976 +0200 -@@ -206,6 +206,14 @@ - if (strstr(arcs_cmdline, "console=")) - return; - -+#ifdef CONFIG_KGDB -+ if (!strstr(prom_getcmdline(), "nokgdb")) { -+ strcat(prom_getcmdline(), " console=kgdb"); -+ kgdb_enabled = 1; -+ return; -+ } -+#endif -+ - s = prom_getenv("modetty0"); - if (s) { - baud = simple_strtoul(s, &p, 10); -diff -Nur linux-2.6.34.orig/arch/mips/Kconfig linux-2.6.34/arch/mips/Kconfig ---- linux-2.6.34.orig/arch/mips/Kconfig 2010-05-16 23:17:36.000000000 +0200 -+++ linux-2.6.34/arch/mips/Kconfig 2010-05-28 15:52:27.142223192 +0200 -@@ -34,7 +34,6 @@ - select CEVT_R4K - select CSRC_R4K - select IRQ_CPU -- select NO_EXCEPT_FILL - select SWAP_IO_SPACE - select SYS_HAS_CPU_MIPS32_R1 - select SYS_HAS_EARLY_PRINTK -diff -Nur linux-2.6.34.orig/drivers/mtd/ar7part.c linux-2.6.34/drivers/mtd/ar7part.c ---- linux-2.6.34.orig/drivers/mtd/ar7part.c 2010-05-16 23:17:36.000000000 +0200 -+++ linux-2.6.34/drivers/mtd/ar7part.c 2010-05-28 15:52:27.232223555 +0200 -@@ -28,7 +28,7 @@ - #include <linux/bootmem.h> - #include <linux/magic.h> - --#define AR7_PARTS 4 -+#define AR7_PARTS 5 - #define ROOT_OFFSET 0xe0000 - - #define LOADER_MAGIC1 le32_to_cpu(0xfeedfa42) -@@ -122,14 +122,19 @@ - - ar7_parts[2].name = "linux"; - ar7_parts[2].offset = pre_size; -- ar7_parts[2].size = master->size - pre_size - post_size; -+ ar7_parts[2].size = master->size - pre_size - post_size - 2*master->erasesize; - ar7_parts[2].mask_flags = 0; - - ar7_parts[3].name = "rootfs"; - ar7_parts[3].offset = root_offset; -- ar7_parts[3].size = master->size - root_offset - post_size; -+ ar7_parts[3].size = master->size - root_offset - post_size - 2*master->erasesize; - ar7_parts[3].mask_flags = 0; - -+ ar7_parts[4].name = "cfgfs"; -+ ar7_parts[4].offset = master->size - 2*master->erasesize; -+ ar7_parts[4].size = 2*master->erasesize; -+ ar7_parts[4].mask_flags = 0; -+ - *pparts = ar7_parts; - return AR7_PARTS; - } -diff -Nur linux-2.6.34.orig/drivers/mtd/maps/physmap.c linux-2.6.34/drivers/mtd/maps/physmap.c ---- linux-2.6.34.orig/drivers/mtd/maps/physmap.c 2010-05-16 23:17:36.000000000 +0200 -+++ linux-2.6.34/drivers/mtd/maps/physmap.c 2010-05-28 15:52:27.281073432 +0200 -@@ -79,7 +79,7 @@ - "map_rom", - NULL }; - #ifdef CONFIG_MTD_PARTITIONS --static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; -+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ar7part", NULL }; - #endif - - static int physmap_flash_probe(struct platform_device *dev) -diff -Nur linux-2.6.34.orig/drivers/serial/8250.c linux-2.6.34/drivers/serial/8250.c ---- linux-2.6.34.orig/drivers/serial/8250.c 2010-05-16 23:17:36.000000000 +0200 -+++ linux-2.6.34/drivers/serial/8250.c 2010-05-28 15:52:27.330968429 +0200 -@@ -2746,7 +2746,11 @@ - { - struct uart_8250_port *up = (struct uart_8250_port *)port; - -+#ifdef CONFIG_AR7 -+ wait_for_xmitr(up, BOTH_EMPTY); -+#else - wait_for_xmitr(up, UART_LSR_THRE); -+#endif - serial_out(up, UART_TX, ch); - } - diff --git a/target/ag241/target.mk b/target/ag241/target.mk deleted file mode 100644 index 95a66a072..000000000 --- a/target/ag241/target.mk +++ /dev/null @@ -1,5 +0,0 @@ -include $(TOPDIR)/mk/kernel-ver.mk -ARCH:= mips -CPU_ARCH:= mipsel -TARGET_OPTIMIZATION:= -Os -pipe -TARGET_CFLAGS_ARCH:= -march=mips32 diff --git a/target/ag241/tools/addpattern/Makefile b/target/ag241/tools/addpattern/Makefile deleted file mode 100644 index 3ac1884fa..000000000 --- a/target/ag241/tools/addpattern/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -include $(TOPDIR)/rules.mk - -all: - $(HOSTCC) ${HOSTCFLAGS} -o ${STAGING_TOOLS}/bin/addpattern addpattern.c diff --git a/target/ag241/tools/addpattern/addpattern.c b/target/ag241/tools/addpattern/addpattern.c deleted file mode 100644 index 6f2a036c0..000000000 --- a/target/ag241/tools/addpattern/addpattern.c +++ /dev/null @@ -1,255 +0,0 @@ -/* - * Copyright (C) 2004 Manuel Novoa III <mjn3@codepoet.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* July 29, 2004 - * - * This is a hacked replacement for the 'addpattern' utility used to - * create wrt54g .bin firmware files. It isn't pretty, but it does - * the job for me. - * - * Extensions: - * -v allows setting the version string on the command line. - * -{0|1} sets the (currently ignored) hw_ver flag in the header - * to 0 or 1 respectively. - */ - -/* January 12, 2005 - * - * Modified by rodent at rodent dot za dot net - * Support added for the new WRT54G v2.2 and WRT54GS v1.1 "flags" - * Without the flags set to 0x7, the above units will refuse to flash. - * - * Extensions: - * -{0|1|2} sets {0|1} sets hw_ver flag to 0/1. {2} sets hw_ver to 1 - * and adds the new hardware "flags" for the v2.2/v1.1 units -*/ - -/* January 1, 2007 - * - * Modified by juan.i.gonzalez at subdown dot net - * Support added for the AG241v2 and similar - * - * Extensions: - * -r #.# adds revision hardware flags. AG241v2 and similar. - * - * AG241V2 firmware sets the hw_ver to 0x44. - * - * Example: -r 2.0 - * - * Convert 2.0 to 20 to be an integer, and add 0x30 to skip special ASCII - * #define HW_Version ((HW_REV * 10) + 0x30) -> from cyutils.h -*/ - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <time.h> -#include <unistd.h> -#include <sys/stat.h> - -/**********************************************************************/ - -#define CODE_ID "U2ND" /* from code_pattern.h */ -#define CODE_PATTERN "W54S" /* from code_pattern.h */ -#define PBOT_PATTERN "PBOT" - -#define CYBERTAN_VERSION "v3.37.2" /* from cyutils.h */ - -/* WRT54G v2.2 and WRT54GS v1.1 "flags" (from 3.37.32 firmware cyutils.h) */ -#define SUPPORT_4712_CHIP 0x0001 -#define SUPPORT_INTEL_FLASH 0x0002 -#define SUPPORT_5325E_SWITCH 0x0004 - -struct code_header { /* from cyutils.h */ - char magic[4]; - char res1[4]; /* for extra magic */ - char fwdate[3]; - char fwvern[3]; - char id[4]; /* U2ND */ - char hw_ver; /* 0: for 4702, 1: for 4712 -- new in 2.04.3 */ - char unused; - unsigned char flags[2]; /* SUPPORT_ flags new for 3.37.2 (WRT54G v2.2 and WRT54GS v1.1) */ - unsigned char res2[10]; -} ; - -/**********************************************************************/ - -void usage(void) __attribute__ (( __noreturn__ )); - -void usage(void) -{ - fprintf(stderr, "Usage: addpattern [-i trxfile] [-o binfile] [-p pattern] [-g] [-b] [-v v#.#.#] [-r #.#] [-{0|1|2|4}] -h\n"); - exit(EXIT_FAILURE); -} - -int main(int argc, char **argv) -{ - char buf[1024]; /* keep this at 1k or adjust garbage calc below */ - struct code_header *hdr; - FILE *in = stdin; - FILE *out = stdout; - char *ifn = NULL; - char *ofn = NULL; - char *pattern = CODE_PATTERN; - char *pbotpat = PBOT_PATTERN; - char *version = CYBERTAN_VERSION; - int gflag = 0; - int pbotflag = 0; - int c; - int v0, v1, v2; - size_t off, n; - time_t t; - struct tm *ptm; - - fprintf(stderr, "mjn3's addpattern replacement - v0.81\n"); - - hdr = (struct code_header *) buf; - memset(hdr, 0, sizeof(struct code_header)); - - while ((c = getopt(argc, argv, "i:o:p:gbv:0124hr:")) != -1) { - switch (c) { - case 'i': - ifn = optarg; - break; - case 'o': - ofn = optarg; - break; - case 'p': - pattern = optarg; - break; - case 'g': - gflag = 1; - break; - case 'b': - pbotflag = 1; - break; - case 'v': /* extension to allow setting version */ - version = optarg; - break; - case '0': - hdr->hw_ver = 0; - break; - case '1': - hdr->hw_ver = 1; - break; - case '2': /* new 54G v2.2 and 54GS v1.1 flags */ - hdr->hw_ver = 1; - hdr->flags[0] |= SUPPORT_4712_CHIP; - hdr->flags[0] |= SUPPORT_INTEL_FLASH; - hdr->flags[0] |= SUPPORT_5325E_SWITCH; - break; - case '4': - /* V4 firmware sets the flags to 0x1f */ - hdr->hw_ver = 0; - hdr->flags[0] = 0x1f; - break; - case 'r': - hdr->hw_ver = (char)(atof(optarg)*10)+0x30; - break; - - case 'h': - default: - usage(); - } - } - - if (optind != argc || optind == 1) { - fprintf(stderr, "illegal arg \"%s\"\n", argv[optind]); - usage(); - } - - if (strlen(pattern) != 4) { - fprintf(stderr, "illegal pattern \"%s\": length != 4\n", pattern); - usage(); - } - - if (ifn && !(in = fopen(ifn, "r"))) { - fprintf(stderr, "can not open \"%s\" for reading\n", ifn); - usage(); - } - - if (ofn && !(out = fopen(ofn, "w"))) { - fprintf(stderr, "can not open \"%s\" for writing\n", ofn); - usage(); - } - - if (time(&t) == (time_t)(-1)) { - fprintf(stderr, "time call failed\n"); - return EXIT_FAILURE; - } - - ptm = localtime(&t); - - if (3 != sscanf(version, "v%d.%d.%d", &v0, &v1, &v2)) { - fprintf(stderr, "bad version string \"%s\"\n", version); - return EXIT_FAILURE; - } - - memcpy(&hdr->magic, pattern, 4); - if (pbotflag) - memcpy(&hdr->res1, pbotpat, 4); - hdr->fwdate[0] = ptm->tm_year % 100; - hdr->fwdate[1] = ptm->tm_mon + 1; - hdr->fwdate[2] = ptm->tm_mday; - hdr->fwvern[0] = v0; - hdr->fwvern[1] = v1; - hdr->fwvern[2] = v2; - memcpy(&hdr->id, CODE_ID, strlen(CODE_ID)); - - off = sizeof(struct code_header); - - fprintf(stderr, "writing firmware v%d.%d.%d on %d/%d/%d (y/m/d)\n", - v0, v1, v2, - hdr->fwdate[0], hdr->fwdate[1], hdr->fwdate[2]); - - - while ((n = fread(buf + off, 1, sizeof(buf)-off, in) + off) > 0) { - off = 0; - if (n < sizeof(buf)) { - if (ferror(in)) { - FREAD_ERROR: - fprintf(stderr, "fread error\n"); - return EXIT_FAILURE; - } - if (gflag) { - gflag = sizeof(buf) - n; - memset(buf + n, 0xff, gflag); - fprintf(stderr, "adding %d bytes of garbage\n", gflag); - n = sizeof(buf); - } - } - if (!fwrite(buf, n, 1, out)) { - FWRITE_ERROR: - fprintf(stderr, "fwrite error\n"); - return EXIT_FAILURE; - } - } - - if (ferror(in)) { - goto FREAD_ERROR; - } - - if (fflush(out)) { - goto FWRITE_ERROR; - } - - fclose(in); - fclose(out); - - return EXIT_SUCCESS; -} diff --git a/target/ag241/tools/rules.mk b/target/ag241/tools/rules.mk deleted file mode 100644 index a6a3684ac..000000000 --- a/target/ag241/tools/rules.mk +++ /dev/null @@ -1,7 +0,0 @@ -# This file is part of the OpenADK project. OpenADK is copyrighted -# material, please see the LICENCE file in the top-level directory. - -WRKDIR_BASE= ${TOOLS_BUILD_DIR} -WRKDIR= ${WRKDIR_BASE} - -include ${TOPDIR}/mk/buildhlp.mk diff --git a/target/ag241/tools/srec2bin/Makefile b/target/ag241/tools/srec2bin/Makefile deleted file mode 100644 index dd6a285fd..000000000 --- a/target/ag241/tools/srec2bin/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -include $(TOPDIR)/rules.mk - -all: - $(HOSTCC) ${HOSTCFLAGS} -o ${STAGING_TOOLS}/bin/srec2bin srec2bin.c diff --git a/target/ag241/tools/srec2bin/srec2bin.c b/target/ag241/tools/srec2bin/srec2bin.c deleted file mode 100644 index 1cffbaed9..000000000 --- a/target/ag241/tools/srec2bin/srec2bin.c +++ /dev/null @@ -1,524 +0,0 @@ -#include <stdio.h> -#include <ctype.h> -#include <string.h> - -//Rev 0.1 Original -// 8 Jan 2001 MJH Added code to write data to Binary file -// note: outputfile is name.bin, where name is first part -// of input file. ie tmp.rec -> tmp.bin -// -// srec2bin <input SREC file> <Output Binary File> <If Present, Big Endian> -// -// TAG -// bit32u TAG_BIG = 0xDEADBE42; -// bit32u TAG_LITTLE = 0xFEEDFA42; -// -// File Structure -// -// TAG : 32 Bits -// [DATA RECORDS] -// -// Data Records Structure -// -// LENGTH : 32 Bits <- Length of DATA, excludes ADDRESS and CHECKSUM -// ADDRESS : 32 Bits -// DATA : 8 Bits * LENGTH -// CHECKSUM: 32 Bits <- 0 - (Sum of Length --> End of Data) -// -// Note : If Length == 0, Address will be Program Start -// -// -// -// -// - -#define MajRevNum 0 -#define MinRevNum 2 - - -#define EndianSwitch(x) ((x >> 24) | (x << 24) | ((x << 8) & (0x00FF0000)) | ((x >> 8) & (0x0000FF00)) ) - -typedef unsigned char bit8u; -typedef unsigned int bit32u; -typedef int bit32; - -#define FALSE 0 -#define TRUE (!FALSE) - - -bit32u CheckSum; -int RecStart; -int debug; -int verbose; - -FILE *OpenOutputFile( char *Name ); -FILE *fOut; -bit32u RecLength=0; - -bit32u AddressCurrent; - -bit32u gh(char *cp,int nibs); - -int BigEndian; - -int inputline; - -// char buf[16*1024]; - -char buffer[2048]; -char *cur_ptr; -int cur_line=0; -int cur_len=0; - -int s1s2s3_total=0; - -bit32u PBVal; -int PBValid; -bit32u PBAdr; - - -void dumpfTell(char *s, bit32u Value) -{ - int Length; - Length = (int) RecLength; - if (debug) - printf("[%s ] ftell()[0x%08lX] Length[0x%4X] Length[%4d] Value[0x%08x]\n", - s, ftell(fOut), Length, Length, Value); -} - -void DispHex(bit32u Hex) -{ -// printf("%X", Hex); -} - -void WaitDisplay(void) -{ - static int Count=0; - static int Index=0; - char iline[]={"-\\|/"}; - - Count++; - if ((Count % 32)==0) - { - if (verbose) - printf("%c%c",iline[Index++],8); - Index &= 3; - } -} - - -void binOut32 ( bit32u Data ) -{ -// On UNIX machine all 32bit writes need ENDIAN switched -// Data = EndianSwitch(Data); -// fwrite( &Data, sizeof(bit32u), 1, fOut); - - char sdat[4]; - int i; - - for(i=0;i<4;i++) - sdat[i]=(char)(Data>>(i*8)); - fwrite( sdat, 1, 4, fOut); - dumpfTell("Out32" , Data); -} - -// Only update RecLength on Byte Writes -// All 32 bit writes will be for Length etc - -void binOut8 ( bit8u Data ) -{ - int n; - dumpfTell("B4Data" , (bit32u) (Data & 0xFF) ); - n = fwrite( &Data, sizeof(bit8u), 1, fOut); - if (n != 1) - printf("Error in writing %X for Address 0x%8X\n", Data, AddressCurrent); - RecLength += 1; -} - -// Currently ONLY used for outputting Program Start - -void binRecStart(bit32u Address) -{ - RecLength = 0; - CheckSum = Address; - RecStart = TRUE; - - if (debug) - printf("[RecStart] CheckSum[0x%08X] Length[%4d] Address[0x%08X]\n", - CheckSum, RecLength, Address); - - - dumpfTell("RecLength", RecLength); - binOut32( RecLength ); - dumpfTell("Address", Address); - binOut32( Address ); -} - -void binRecEnd(void) -{ - long RecEnd; - - if (!RecStart) // if no record started, do not end it - { - return; - } - - RecStart = FALSE; - - - RecEnd = ftell(fOut); // Save Current position - - if (debug) - printf("[RecEnd ] CheckSum[0x%08X] Length[%4d] Length[0x%X] RecEnd[0x%08lX]\n", - CheckSum, RecLength, RecLength, RecEnd); - - fseek( fOut, -((long) RecLength), SEEK_CUR); // move back Start Of Data - - dumpfTell("Data ", -1); - - fseek( fOut, -4, SEEK_CUR); // move back Start Of Address - - dumpfTell("Address ", -1); - - fseek( fOut, -4, SEEK_CUR); // move back Start Of Length - - dumpfTell("Length ", -1); - - binOut32( RecLength ); - - fseek( fOut, RecEnd, SEEK_SET); // move to end of Record - - CheckSum += RecLength; - - CheckSum = ~CheckSum + 1; // Two's complement - - binOut32( CheckSum ); - - if (verbose) - printf("[Created Record of %d Bytes with CheckSum [0x%8X]\n", RecLength, CheckSum); -} - -void binRecOutProgramStart(bit32u Address) -{ - if (Address != (AddressCurrent+1)) - { - binRecEnd(); - binRecStart(Address); - } - AddressCurrent = Address; -} -void binRecOutByte(bit32u Address, bit8u Data) -{ - // If Address is one after Current Address, output Byte - // If not, close out last record, update Length, write checksum - // Then Start New Record, updating Current Address - - if (Address != (AddressCurrent+1)) - { - binRecEnd(); - binRecStart(Address); - } - AddressCurrent = Address; - CheckSum += Data; - binOut8( Data ); -} - -//============================================================================= -// SUPPORT FUNCTIONS -//============================================================================= -int readline(FILE *fil,char *buf,int len) -{ - int rlen; - - rlen=0; - if (len==0) return(0); - while(1) - { - if (cur_len==0) - { - cur_len=fread(buffer, 1, sizeof(buffer), fil); - if (cur_len==0) - { - if (rlen) - { - *buf=0; - return(rlen); - } - return(-1); - } - cur_ptr=buffer; - } - if (cur_len) - { - if (*cur_ptr=='\n') - { - *buf=0; - cur_ptr++; - cur_len--; - return(rlen); - } - else - { - if ((len>1)&&(*cur_ptr!='\r')) - { - *buf++=*cur_ptr++; - len--; - } - else - cur_ptr++; - - rlen++; - cur_len--; - } - } - else - { - *buf=0; - cur_ptr++; - cur_len--; - return(rlen); - } - } -} - - -int SRLerrorout(char *c1,char *c2) -{ - printf("\nERROR: %s - '%s'.",c1,c2); - return(FALSE); -} - - -int checksum(char *cp,int count) -{ - char *scp; - int cksum; - int dum; - - scp=cp; - while(*scp) - { - if (!isxdigit(*scp++)) - return(SRLerrorout("Invalid hex digits",cp)); - } - scp=cp; - - cksum=count; - - while(count) - { - cksum += gh(scp,2); - if (count == 2) - dum = ~cksum; - scp += 2; - count--; - } - cksum&=0x0ff; - // printf("\nCk:%02x",cksum); - return(cksum==0x0ff); -} - -bit32u gh(char *cp,int nibs) -{ - int i; - bit32u j; - - j=0; - - for(i=0;i<nibs;i++) - { - j<<=4; - if ((*cp>='a')&&(*cp<='z')) *cp &= 0x5f; - if ((*cp>='0')&&(*cp<='9')) - j += (*cp-0x30); - else - if ((*cp>='A')&&(*cp<='F')) - j += (*cp-0x37); - else - SRLerrorout("Bad Hex char", cp); - cp++; - } - return(j); -} - - -//============================================================================= -// PROCESS SREC LINE -//============================================================================= - -int srecLine(char *pSrecLine) -{ - char *scp,ch; - int itmp,count,dat; - bit32u adr; - static bit32u RecordCounter=0; - - cur_line++; - scp=pSrecLine; - - if (*pSrecLine!='S') - return(SRLerrorout("Not an Srecord file",scp)); - pSrecLine++; - if (strlen(pSrecLine)<4) - return(SRLerrorout("Srecord too short",scp)); - - ch=*pSrecLine++; - - count=gh(pSrecLine,2); - - pSrecLine += 2; - - // if(debug) - // printf("count %d, strlen(pSrecLine) = %d, pSrecLine =[%s]\n", count, strlen(pSrecLine), pSrecLine); - RecordCounter++; - DispHex(RecordCounter); - - if ((count*2) != strlen(pSrecLine)) return(SRLerrorout("Count field larger than record",scp)); - - if (!checksum(pSrecLine, count)) return(SRLerrorout("Bad Checksum",scp)); - - switch(ch) - { - case '0': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - itmp=gh(pSrecLine,4); pSrecLine+=4; count-=2; - if (itmp) return(SRLerrorout("Srecord 1 address not zero",scp)); - break; - case '1': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - case '2': if (count<4) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - case '3': if (count<5) return(SRLerrorout("Invalid Srecord count field",scp)); - adr=gh(pSrecLine,8); pSrecLine+=8; count-=4; - count--; - while(count) - { - dat=gh(pSrecLine,2); pSrecLine+=2; count--; - binRecOutByte(adr, (char) (dat & 0xFF)); - adr++; - } - s1s2s3_total++; - break; - case '4': return(SRLerrorout("Invalid Srecord type",scp)); - break; - case '5': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - itmp=gh(pSrecLine,4); pSrecLine+=4; count-=2; - if (itmp|=s1s2s3_total) return(SRLerrorout("Incorrect number of S3 Record processed",scp)); - break; - case '6': return(SRLerrorout("Invalid Srecord type",scp)); - break; - case '7': // PROGRAM START - if (count<5) return(SRLerrorout("Invalid Srecord count field",scp)); - adr=gh(pSrecLine,8); pSrecLine+=8; count-=4; - if (count!=1) return(SRLerrorout("Invalid Srecord count field",scp)); - binRecOutProgramStart(adr); - break; - case '8': if (count<4) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - case '9': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - default: - break; - } - return(TRUE); -} - - -//============================================================================= -// MAIN LOGIC, READS IN LINE AND OUTPUTS BINARY -//============================================================================= - -int srec2bin(int argc,char *argv[],int verbose) -{ - int i,rlen,sts; - FILE *fp; - char ac; - char buff[256]; - bit32u TAG_BIG = 0xDEADBE42; - bit32u TAG_LITTLE = 0xFEEDFA42; - - bit32u Tag; - - - if(argc < 3) - { - printf("\nError: <srec2bin <srec input file> <bin output file>\n\n"); - return(0); - } - - if (argc > 3) BigEndian=TRUE; else BigEndian=FALSE; - - if (BigEndian) - Tag = TAG_BIG; - else - Tag = TAG_LITTLE; - - if (verbose) - printf("\nEndian: %s, Tag is 0x%8X\n",(BigEndian)?"BIG":"LITTLE", Tag); - - fp = fopen(argv[1],"rt"); - - if (fp==NULL) - { - printf("\nError: Opening input file, %s.", argv[1]); - return(0); - } - - fOut = fopen( argv[2], "wb"); - - if (fOut==NULL) - { - printf("\nError: Opening Output file, %s.", argv[2]); - if(fp) fclose(fp); - return(0); - } - - RecStart = FALSE; - - AddressCurrent = 0xFFFFFFFFL; - - // Setup Tag - - dumpfTell("Tag", Tag); - - binOut32(Tag); - - - inputline=0; - sts=TRUE; - - rlen = readline(fp,buff,sizeof buff); - - while( (sts) && (rlen != -1)) - { - if (strlen(buff)) - { - sts &= srecLine(buff); - WaitDisplay(); - } - rlen = readline(fp,buff,sizeof buff); - } - - - // printf("PC: 0x%08X, Length 0x%08X, Tag 0x%08X\n", ProgramStart, RecLength, TAG_LITTLE); - - binRecEnd(); - - if(fp) fclose(fp); - if(fOut) fclose(fOut); - - return(1); -} - -main(int argc, char *argv[]) -{ - debug = TRUE; - debug = FALSE; - verbose = FALSE; - srec2bin(argc,argv,verbose); - return 0; -} - diff --git a/target/ag241/uclibc.config b/target/ag241/uclibc.config deleted file mode 100644 index 4ec29e966..000000000 --- a/target/ag241/uclibc.config +++ /dev/null @@ -1,233 +0,0 @@ -# -# Automatically generated make config: don't edit -# Version: 0.9.30.1 -# Wed Jan 13 08:23:16 2010 -# -# TARGET_alpha is not set -# TARGET_arm is not set -# TARGET_avr32 is not set -# TARGET_bfin is not set -# TARGET_cris is not set -# TARGET_e1 is not set -# TARGET_frv is not set -# TARGET_h8300 is not set -# TARGET_hppa is not set -# TARGET_i386 is not set -# TARGET_i960 is not set -# TARGET_ia64 is not set -# TARGET_m68k is not set -# TARGET_microblaze is not set -TARGET_mips=y -# TARGET_nios is not set -# TARGET_nios2 is not set -# TARGET_powerpc is not set -# TARGET_sh is not set -# TARGET_sh64 is not set -# TARGET_sparc is not set -# TARGET_v850 is not set -# TARGET_vax is not set -# TARGET_x86_64 is not set -# TARGET_xtensa is not set - -# -# Target Architecture Features and Options -# -TARGET_ARCH="mips" -FORCE_OPTIONS_FOR_ARCH=y -ARCH_CFLAGS="-mno-split-addresses" -CONFIG_MIPS_O32_ABI=y -# CONFIG_MIPS_N32_ABI is not set -# CONFIG_MIPS_N64_ABI is not set -# CONFIG_MIPS_ISA_1 is not set -# CONFIG_MIPS_ISA_2 is not set -# CONFIG_MIPS_ISA_3 is not set -# CONFIG_MIPS_ISA_4 is not set -CONFIG_MIPS_ISA_MIPS32=y -# CONFIG_MIPS_ISA_MIPS32R2 is not set -# CONFIG_MIPS_ISA_MIPS64 is not set -TARGET_SUBARCH="" - -# -# Using ELF file format -# -ARCH_ANY_ENDIAN=y -ARCH_LITTLE_ENDIAN=y -# ARCH_WANTS_BIG_ENDIAN is not set -ARCH_WANTS_LITTLE_ENDIAN=y -ARCH_HAS_MMU=y -ARCH_USE_MMU=y -UCLIBC_HAS_FLOATS=y -UCLIBC_HAS_FPU=y -DO_C99_MATH=y -UCLIBC_HAS_FENV=y -KERNEL_HEADERS="" -HAVE_DOT_CONFIG=y - -# -# General Library Settings -# -# HAVE_NO_PIC is not set -DOPIC=y -# ARCH_HAS_NO_SHARED is not set -# ARCH_HAS_NO_LDSO is not set -HAVE_SHARED=y -# FORCE_SHAREABLE_TEXT_SEGMENTS is not set -LDSO_LDD_SUPPORT=y -LDSO_CACHE_SUPPORT=y -# LDSO_PRELOAD_FILE_SUPPORT is not set -LDSO_BASE_FILENAME="ld.so" -# UCLIBC_STATIC_LDCONFIG is not set -LDSO_RUNPATH=y -UCLIBC_CTOR_DTOR=y -# LDSO_GNU_HASH_SUPPORT is not set -# HAS_NO_THREADS is not set -UCLIBC_HAS_THREADS=y -PTHREADS_DEBUG_SUPPORT=y -LINUXTHREADS_OLD=y -UCLIBC_HAS_SYSLOG=y -UCLIBC_HAS_LFS=y -# MALLOC is not set -# MALLOC_SIMPLE is not set -MALLOC_STANDARD=y -MALLOC_GLIBC_COMPAT=y -UCLIBC_DYNAMIC_ATEXIT=y -COMPAT_ATEXIT=y -UCLIBC_SUSV3_LEGACY=y -# UCLIBC_SUSV3_LEGACY_MACROS is not set -# UCLIBC_HAS_STUBS is not set -UCLIBC_HAS_SHADOW=y -UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y -UCLIBC_HAS___PROGNAME=y -UCLIBC_HAS_PTY=y -ASSUME_DEVPTS=y -UNIX98PTY_ONLY=y -# UCLIBC_HAS_GETPT is not set -UCLIBC_HAS_TM_EXTENSIONS=y -UCLIBC_HAS_TZ_CACHING=y -UCLIBC_HAS_TZ_FILE=y -UCLIBC_HAS_TZ_FILE_READ_MANY=y -UCLIBC_TZ_FILE_PATH="/etc/TZ" - -# -# Advanced Library Settings -# -UCLIBC_PWD_BUFFER_SIZE=256 -UCLIBC_GRP_BUFFER_SIZE=256 - -# -# Support various families of functions -# -# UCLIBC_LINUX_MODULE_24 is not set -UCLIBC_LINUX_SPECIFIC=y -UCLIBC_HAS_GNU_ERROR=y -UCLIBC_BSD_SPECIFIC=y -UCLIBC_HAS_BSD_ERR=y -# UCLIBC_HAS_OBSOLETE_BSD_SIGNAL is not set -# UCLIBC_HAS_OBSOLETE_SYSV_SIGNAL is not set -# UCLIBC_NTP_LEGACY is not set -# UCLIBC_SV4_DEPRECATED is not set -UCLIBC_HAS_REALTIME=y -UCLIBC_HAS_ADVANCED_REALTIME=y -UCLIBC_HAS_EPOLL=y -UCLIBC_HAS_XATTR=y -# UCLIBC_HAS_PROFILING is not set -UCLIBC_HAS_CRYPT_IMPL=y -UCLIBC_HAS_CRYPT=y -UCLIBC_HAS_NETWORK_SUPPORT=y -UCLIBC_HAS_SOCKET=y -UCLIBC_HAS_IPV4=y -UCLIBC_HAS_IPV6=y -UCLIBC_HAS_RPC=y -UCLIBC_HAS_FULL_RPC=y -UCLIBC_HAS_REENTRANT_RPC=y -UCLIBC_USE_NETLINK=y -UCLIBC_SUPPORT_AI_ADDRCONFIG=y -UCLIBC_HAS_BSD_RES_CLOSE=y - -# -# String and Stdio Support -# -UCLIBC_HAS_STRING_GENERIC_OPT=y -UCLIBC_HAS_STRING_ARCH_OPT=y -UCLIBC_HAS_CTYPE_TABLES=y -UCLIBC_HAS_CTYPE_SIGNED=y -# UCLIBC_HAS_CTYPE_UNSAFE is not set -UCLIBC_HAS_CTYPE_CHECKED=y -# UCLIBC_HAS_CTYPE_ENFORCED is not set -UCLIBC_HAS_WCHAR=y -# UCLIBC_HAS_LOCALE is not set -UCLIBC_HAS_HEXADECIMAL_FLOATS=y -UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y -UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9 -UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y -# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set -# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set -# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set -# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set -# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set -UCLIBC_HAS_STDIO_BUFSIZ_4096=y -# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set -UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y -# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set -# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set -# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set -UCLIBC_HAS_STDIO_GETC_MACRO=y -UCLIBC_HAS_STDIO_PUTC_MACRO=y -UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y -# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set -UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y -UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y -UCLIBC_HAS_PRINTF_M_SPEC=y -UCLIBC_HAS_ERRNO_MESSAGES=y -# UCLIBC_HAS_SYS_ERRLIST is not set -UCLIBC_HAS_SIGNUM_MESSAGES=y -# UCLIBC_HAS_SYS_SIGLIST is not set -UCLIBC_HAS_GNU_GETOPT=y -UCLIBC_HAS_GNU_GETSUBOPT=y - -# -# Big and Tall -# -UCLIBC_HAS_REGEX=y -UCLIBC_HAS_REGEX_OLD=y -UCLIBC_HAS_FNMATCH=y -UCLIBC_HAS_FNMATCH_OLD=y -UCLIBC_HAS_WORDEXP=y -UCLIBC_HAS_FTW=y -UCLIBC_HAS_GLOB=y -UCLIBC_HAS_GNU_GLOB=y - -# -# Library Installation Options -# -SHARED_LIB_LOADER_PREFIX="/lib" -RUNTIME_PREFIX="/" -DEVEL_PREFIX="/usr/" - -# -# Security options -# -# UCLIBC_BUILD_PIE is not set -UCLIBC_HAS_ARC4RANDOM=y -# HAVE_NO_SSP is not set -# UCLIBC_HAS_SSP is not set -UCLIBC_BUILD_RELRO=y -# UCLIBC_BUILD_NOW is not set -UCLIBC_BUILD_NOEXECSTACK=y - -# -# uClibc development/debugging options -# -CROSS_COMPILER_PREFIX="" -UCLIBC_EXTRA_CFLAGS="" -# DODEBUG is not set -# DODEBUG_PT is not set -DOSTRIP=y -# DOASSERTS is not set -# SUPPORT_LD_DEBUG is not set -# SUPPORT_LD_DEBUG_EARLY is not set -# UCLIBC_MALLOC_DEBUGGING is not set -WARNINGS="-Wall" -# EXTRA_WARNINGS is not set -# DOMULTI is not set -# UCLIBC_MJN3_ONLY is not set |