4 files changed, 68 insertions, 1 deletions
diff --git a/package/bcm28xx-bootloader/Makefile b/package/bcm28xx-bootloader/Makefile
index 0d2828e9c..6c0fc0b5e 100644
--- a/package/bcm28xx-bootloader/Makefile
+++ b/package/bcm28xx-bootloader/Makefile
@@ -56,6 +56,7 @@ do-install:
 	$(CP) $(WRKBUILD)/boot/bootcode.bin $(IDIR_BCM28XX_BOOTLOADER)/boot/
 	printf "$(CMDLINE)\n" > $(IDIR_BCM28XX_BOOTLOADER)/boot/cmdline.txt
 	printf "kernel=kernel\n" > $(IDIR_BCM28XX_BOOTLOADER)/boot/config.txt
+	printf "dtdebug=on\n" >> $(IDIR_BCM28XX_BOOTLOADER)/boot/config.txt
 	printf "dtparam=audio,i2s,spi,i2c\n" >> \
 		$(IDIR_BCM28XX_BOOTLOADER)/boot/config.txt
 ifeq ($(ADK_PACKAGE_BCM28XX_BOOTLOADER_DEFAULT),y)
@@ -101,7 +102,7 @@ ifneq ($(ADK_KERNEL_SND_BCM2708_SOC_RPI_PROTO),)
 endif
 ifeq ($(ADK_PACKAGE_BCM28XX_DEBUGTOOL),y)
 	$(INSTALL_DIR) $(IDIR_BCM28XX_DEBUGTOOL)/opt/vc/bin
-	$(INSTALL_BIN) $(WRKBUILD)/hardfp/opt/vc/bin/vcdbg \
+	$(INSTALL_BIN) ./files/vcdbg \
 		$(IDIR_BCM28XX_DEBUGTOOL)/opt/vc/bin
 endif
 
diff --git a/package/bcm28xx-bootloader/files/vcdbg b/package/bcm28xx-bootloader/files/vcdbg
new file mode 100755
index 000000000..ba3e55e8e
--- /dev/null
+++ b/package/bcm28xx-bootloader/files/vcdbg
diff --git a/package/brcmfmac-firmware/src/brcmfmac43430-sdio.bin b/package/brcmfmac-firmware/src/brcmfmac43430-sdio.bin
new file mode 100644
index 000000000..84ab5b0de
--- /dev/null
+++ b/package/brcmfmac-firmware/src/brcmfmac43430-sdio.bin
diff --git a/package/brcmfmac-firmware/src/brcmfmac43430-sdio.txt b/package/brcmfmac-firmware/src/brcmfmac43430-sdio.txt
new file mode 100644
index 000000000..ea4f648a1
--- /dev/null
+++ b/package/brcmfmac-firmware/src/brcmfmac43430-sdio.txt
@@ -0,0 +1,66 @@
+# NVRAM file for BCM943430WLPTH
+# 2.4 GHz, 20 MHz BW mode
+
+# The following parameter values are just placeholders, need to be updated.
+manfid=0x2d0
+prodid=0x0727
+vendid=0x14e4
+devid=0x43e2
+boardtype=0x0727
+boardrev=0x1101
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=11
+boardflags=0x00404201
+boardflags3=0x08000000
+xtalfreq=37400
+nocrc=1
+ag0=255
+aa2g=1
+ccode=ALL
+
+pa0itssit=0x20
+extpagain2g=0
+#PA parameters for 2.4GHz, measured at CHIP OUTPUT
+pa2ga0=-168,7161,-820
+AvVmid_c0=0x0,0xc8
+cckpwroffset0=5
+
+# PPR params
+maxp2ga0=84
+txpwrbckof=6
+cckbw202gpo=0
+legofdmbw202gpo=0x66111111
+mcsbw202gpo=0x77711111
+propbw202gpo=0xdd
+
+# OFDM IIR :
+ofdmdigfilttype=18
+ofdmdigfilttypebe=18
+# PAPD mode:
+papdmode=1
+papdvalidtest=1
+pacalidx2g=42
+papdepsoffset=-22
+papdendidx=58
+
+# LTECX flags
+ltecxmux=0
+ltecxpadnum=0x0102
+ltecxfnsel=0x44
+ltecxgcigpio=0x01
+
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+
+deadman_to=0xffffffff
+# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
+muxenab=0x1
+# CLDO PWM voltage settings - 0x4 - 1.1 volt
+#cldo_pwm=0x4
+
+#VCO freq 326.4MHz
+spurconfig=0x3 
+
+edonthd20l=-75
+edoffthd20ul=-80