summaryrefslogtreecommitdiff
path: root/package/tslib/patches/patch-ltmain_sh
diff options
context:
space:
mode:
Diffstat (limited to 'package/tslib/patches/patch-ltmain_sh')
-rw-r--r--package/tslib/patches/patch-ltmain_sh8416
1 files changed, 0 insertions, 8416 deletions
diff --git a/package/tslib/patches/patch-ltmain_sh b/package/tslib/patches/patch-ltmain_sh
deleted file mode 100644
index 8abaeff72..000000000
--- a/package/tslib/patches/patch-ltmain_sh
+++ /dev/null
@@ -1,8416 +0,0 @@
---- tslib-1.0.orig/ltmain.sh 1970-01-01 00:00:00.000000000 +0100
-+++ tslib-1.0/ltmain.sh 2011-01-14 23:22:44.000000000 +0100
-@@ -0,0 +1,8413 @@
-+# Generated from ltmain.m4sh.
-+
-+# ltmain.sh (GNU libtool) 2.2.6b
-+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-+
-+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
-+# This is free software; see the source for copying conditions. There is NO
-+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-+
-+# GNU Libtool is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# As a special exception to the GNU General Public License,
-+# if you distribute this file as part of a program or library that
-+# is built using GNU Libtool, you may include this file under the
-+# same distribution terms that you use for the rest of that program.
-+#
-+# GNU Libtool is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+# General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with GNU Libtool; see the file COPYING. If not, a copy
-+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
-+# or obtained by writing to the Free Software Foundation, Inc.,
-+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-+
-+# Usage: $progname [OPTION]... [MODE-ARG]...
-+#
-+# Provide generalized library-building support services.
-+#
-+# --config show all configuration variables
-+# --debug enable verbose shell tracing
-+# -n, --dry-run display commands without modifying any files
-+# --features display basic configuration information and exit
-+# --mode=MODE use operation mode MODE
-+# --preserve-dup-deps don't remove duplicate dependency libraries
-+# --quiet, --silent don't print informational messages
-+# --tag=TAG use configuration variables from tag TAG
-+# -v, --verbose print informational messages (default)
-+# --version print version information
-+# -h, --help print short or long help message
-+#
-+# MODE must be one of the following:
-+#
-+# clean remove files from the build directory
-+# compile compile a source file into a libtool object
-+# execute automatically set library path, then run a program
-+# finish complete the installation of libtool libraries
-+# install install libraries or executables
-+# link create a library or an executable
-+# uninstall remove libraries from an installed directory
-+#
-+# MODE-ARGS vary depending on the MODE.
-+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
-+#
-+# When reporting a bug, please describe a test case to reproduce it and
-+# include the following information:
-+#
-+# host-triplet: $host
-+# shell: $SHELL
-+# compiler: $LTCC
-+# compiler flags: $LTCFLAGS
-+# linker: $LD (gnu? $with_gnu_ld)
-+# $progname: (GNU libtool) 2.2.6b Debian-2.2.6b-2ubuntu1
-+# automake: $automake_version
-+# autoconf: $autoconf_version
-+#
-+# Report bugs to <bug-libtool@gnu.org>.
-+
-+PROGRAM=ltmain.sh
-+PACKAGE=libtool
-+VERSION="2.2.6b Debian-2.2.6b-2ubuntu1"
-+TIMESTAMP=""
-+package_revision=1.3017
-+
-+# Be Bourne compatible
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-+fi
-+BIN_SH=xpg4; export BIN_SH # for Tru64
-+DUALCASE=1; export DUALCASE # for MKS sh
-+
-+# NLS nuisances: We save the old values to restore during execute mode.
-+# Only set LANG and LC_ALL to C if already set.
-+# These must not be set unconditionally because not all systems understand
-+# e.g. LANG=C (notably SCO).
-+lt_user_locale=
-+lt_safe_locale=
-+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-+do
-+ eval "if test \"\${$lt_var+set}\" = set; then
-+ save_$lt_var=\$$lt_var
-+ $lt_var=C
-+ export $lt_var
-+ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
-+ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
-+ fi"
-+done
-+
-+$lt_unset CDPATH
-+
-+
-+
-+
-+
-+: ${CP="cp -f"}
-+: ${ECHO="echo"}
-+: ${EGREP="/bin/grep -E"}
-+: ${FGREP="/bin/grep -F"}
-+: ${GREP="/bin/grep"}
-+: ${LN_S="ln -s"}
-+: ${MAKE="make"}
-+: ${MKDIR="mkdir"}
-+: ${MV="mv -f"}
-+: ${RM="rm -f"}
-+: ${SED="/bin/sed"}
-+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
-+: ${Xsed="$SED -e 1s/^X//"}
-+
-+# Global variables:
-+EXIT_SUCCESS=0
-+EXIT_FAILURE=1
-+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
-+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
-+
-+exit_status=$EXIT_SUCCESS
-+
-+# Make sure IFS has a sensible default
-+lt_nl='
-+'
-+IFS=" $lt_nl"
-+
-+dirname="s,/[^/]*$,,"
-+basename="s,^.*/,,"
-+
-+# func_dirname_and_basename file append nondir_replacement
-+# perform func_basename and func_dirname in a single function
-+# call:
-+# dirname: Compute the dirname of FILE. If nonempty,
-+# add APPEND to the result, otherwise set result
-+# to NONDIR_REPLACEMENT.
-+# value returned in "$func_dirname_result"
-+# basename: Compute filename of FILE.
-+# value retuned in "$func_basename_result"
-+# Implementation must be kept synchronized with func_dirname
-+# and func_basename. For efficiency, we do not delegate to
-+# those functions but instead duplicate the functionality here.
-+func_dirname_and_basename ()
-+{
-+ # Extract subdirectory from the argument.
-+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
-+ if test "X$func_dirname_result" = "X${1}"; then
-+ func_dirname_result="${3}"
-+ else
-+ func_dirname_result="$func_dirname_result${2}"
-+ fi
-+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-+}
-+
-+# Generated shell functions inserted here.
-+
-+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-+# is ksh but when the shell is invoked as "sh" and the current value of
-+# the _XPG environment variable is not equal to 1 (one), the special
-+# positional parameter $0, within a function call, is the name of the
-+# function.
-+progpath="$0"
-+
-+# The name of this program:
-+# In the unlikely event $progname began with a '-', it would play havoc with
-+# func_echo (imagine progname=-n), so we prepend ./ in that case:
-+func_dirname_and_basename "$progpath"
-+progname=$func_basename_result
-+case $progname in
-+ -*) progname=./$progname ;;
-+esac
-+
-+# Make sure we have an absolute path for reexecution:
-+case $progpath in
-+ [\\/]*|[A-Za-z]:\\*) ;;
-+ *[\\/]*)
-+ progdir=$func_dirname_result
-+ progdir=`cd "$progdir" && pwd`
-+ progpath="$progdir/$progname"
-+ ;;
-+ *)
-+ save_IFS="$IFS"
-+ IFS=:
-+ for progdir in $PATH; do
-+ IFS="$save_IFS"
-+ test -x "$progdir/$progname" && break
-+ done
-+ IFS="$save_IFS"
-+ test -n "$progdir" || progdir=`pwd`
-+ progpath="$progdir/$progname"
-+ ;;
-+esac
-+
-+# Sed substitution that helps us do robust quoting. It backslashifies
-+# metacharacters that are still active within double-quoted strings.
-+Xsed="${SED}"' -e 1s/^X//'
-+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-+
-+# Same as above, but do not quote variable references.
-+double_quote_subst='s/\(["`\\]\)/\\\1/g'
-+
-+# Re-`\' parameter expansions in output of double_quote_subst that were
-+# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
-+# in input to double_quote_subst, that '$' was protected from expansion.
-+# Since each input `\' is now two `\'s, look for any number of runs of
-+# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
-+bs='\\'
-+bs2='\\\\'
-+bs4='\\\\\\\\'
-+dollar='\$'
-+sed_double_backslash="\
-+ s/$bs4/&\\
-+/g
-+ s/^$bs2$dollar/$bs&/
-+ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
-+ s/\n//g"
-+
-+# Standard options:
-+opt_dry_run=false
-+opt_help=false
-+opt_quiet=false
-+opt_verbose=false
-+opt_warning=:
-+
-+# func_echo arg...
-+# Echo program name prefixed message, along with the current mode
-+# name if it has been set yet.
-+func_echo ()
-+{
-+ $ECHO "$progname${mode+: }$mode: $*"
-+}
-+
-+# func_verbose arg...
-+# Echo program name prefixed message in verbose mode only.
-+func_verbose ()
-+{
-+ $opt_verbose && func_echo ${1+"$@"}
-+
-+ # A bug in bash halts the script if the last line of a function
-+ # fails when set -e is in force, so we need another command to
-+ # work around that:
-+ :
-+}
-+
-+# func_error arg...
-+# Echo program name prefixed message to standard error.
-+func_error ()
-+{
-+ $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
-+}
-+
-+# func_warning arg...
-+# Echo program name prefixed warning message to standard error.
-+func_warning ()
-+{
-+ $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
-+
-+ # bash bug again:
-+ :
-+}
-+
-+# func_fatal_error arg...
-+# Echo program name prefixed message to standard error, and exit.
-+func_fatal_error ()
-+{
-+ func_error ${1+"$@"}
-+ exit $EXIT_FAILURE
-+}
-+
-+# func_fatal_help arg...
-+# Echo program name prefixed message to standard error, followed by
-+# a help hint, and exit.
-+func_fatal_help ()
-+{
-+ func_error ${1+"$@"}
-+ func_fatal_error "$help"
-+}
-+help="Try \`$progname --help' for more information." ## default
-+
-+
-+# func_grep expression filename
-+# Check whether EXPRESSION matches any line of FILENAME, without output.
-+func_grep ()
-+{
-+ $GREP "$1" "$2" >/dev/null 2>&1
-+}
-+
-+
-+# func_mkdir_p directory-path
-+# Make sure the entire path to DIRECTORY-PATH is available.
-+func_mkdir_p ()
-+{
-+ my_directory_path="$1"
-+ my_dir_list=
-+
-+ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
-+
-+ # Protect directory names starting with `-'
-+ case $my_directory_path in
-+ -*) my_directory_path="./$my_directory_path" ;;
-+ esac
-+
-+ # While some portion of DIR does not yet exist...
-+ while test ! -d "$my_directory_path"; do
-+ # ...make a list in topmost first order. Use a colon delimited
-+ # list incase some portion of path contains whitespace.
-+ my_dir_list="$my_directory_path:$my_dir_list"
-+
-+ # If the last portion added has no slash in it, the list is done
-+ case $my_directory_path in */*) ;; *) break ;; esac
-+
-+ # ...otherwise throw away the child directory and loop
-+ my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
-+ done
-+ my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
-+
-+ save_mkdir_p_IFS="$IFS"; IFS=':'
-+ for my_dir in $my_dir_list; do
-+ IFS="$save_mkdir_p_IFS"
-+ # mkdir can fail with a `File exist' error if two processes
-+ # try to create one of the directories concurrently. Don't
-+ # stop in that case!
-+ $MKDIR "$my_dir" 2>/dev/null || :
-+ done
-+ IFS="$save_mkdir_p_IFS"
-+
-+ # Bail out if we (or some other process) failed to create a directory.
-+ test -d "$my_directory_path" || \
-+ func_fatal_error "Failed to create \`$1'"
-+ fi
-+}
-+
-+
-+# func_mktempdir [string]
-+# Make a temporary directory that won't clash with other running
-+# libtool processes, and avoids race conditions if possible. If
-+# given, STRING is the basename for that directory.
-+func_mktempdir ()
-+{
-+ my_template="${TMPDIR-/tmp}/${1-$progname}"
-+
-+ if test "$opt_dry_run" = ":"; then
-+ # Return a directory name, but don't create it in dry-run mode
-+ my_tmpdir="${my_template}-$$"
-+ else
-+
-+ # If mktemp works, use that first and foremost
-+ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-+
-+ if test ! -d "$my_tmpdir"; then
-+ # Failing that, at least try and use $RANDOM to avoid a race
-+ my_tmpdir="${my_template}-${RANDOM-0}$$"
-+
-+ save_mktempdir_umask=`umask`
-+ umask 0077
-+ $MKDIR "$my_tmpdir"
-+ umask $save_mktempdir_umask
-+ fi
-+
-+ # If we're not in dry-run mode, bomb out on failure
-+ test -d "$my_tmpdir" || \
-+ func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
-+ fi
-+
-+ $ECHO "X$my_tmpdir" | $Xsed
-+}
-+
-+
-+# func_quote_for_eval arg
-+# Aesthetically quote ARG to be evaled later.
-+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
-+# is double-quoted, suitable for a subsequent eval, whereas
-+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
-+# which are still active within double quotes backslashified.
-+func_quote_for_eval ()
-+{
-+ case $1 in
-+ *[\\\`\"\$]*)
-+ func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
-+ *)
-+ func_quote_for_eval_unquoted_result="$1" ;;
-+ esac
-+
-+ case $func_quote_for_eval_unquoted_result in
-+ # Double-quote args containing shell metacharacters to delay
-+ # word splitting, command substitution and and variable
-+ # expansion for a subsequent eval.
-+ # Many Bourne shells cannot handle close brackets correctly
-+ # in scan sets, so we specify it separately.
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
-+ ;;
-+ *)
-+ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
-+ esac
-+}
-+
-+
-+# func_quote_for_expand arg
-+# Aesthetically quote ARG to be evaled later; same as above,
-+# but do not quote variable references.
-+func_quote_for_expand ()
-+{
-+ case $1 in
-+ *[\\\`\"]*)
-+ my_arg=`$ECHO "X$1" | $Xsed \
-+ -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
-+ *)
-+ my_arg="$1" ;;
-+ esac
-+
-+ case $my_arg in
-+ # Double-quote args containing shell metacharacters to delay
-+ # word splitting and command substitution for a subsequent eval.
-+ # Many Bourne shells cannot handle close brackets correctly
-+ # in scan sets, so we specify it separately.
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ my_arg="\"$my_arg\""
-+ ;;
-+ esac
-+
-+ func_quote_for_expand_result="$my_arg"
-+}
-+
-+
-+# func_show_eval cmd [fail_exp]
-+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
-+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
-+# is given, then evaluate it.
-+func_show_eval ()
-+{
-+ my_cmd="$1"
-+ my_fail_exp="${2-:}"
-+
-+ ${opt_silent-false} || {
-+ func_quote_for_expand "$my_cmd"
-+ eval "func_echo $func_quote_for_expand_result"
-+ }
-+
-+ if ${opt_dry_run-false}; then :; else
-+ eval "$my_cmd"
-+ my_status=$?
-+ if test "$my_status" -eq 0; then :; else
-+ eval "(exit $my_status); $my_fail_exp"
-+ fi
-+ fi
-+}
-+
-+
-+# func_show_eval_locale cmd [fail_exp]
-+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
-+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
-+# is given, then evaluate it. Use the saved locale for evaluation.
-+func_show_eval_locale ()
-+{
-+ my_cmd="$1"
-+ my_fail_exp="${2-:}"
-+
-+ ${opt_silent-false} || {
-+ func_quote_for_expand "$my_cmd"
-+ eval "func_echo $func_quote_for_expand_result"
-+ }
-+
-+ if ${opt_dry_run-false}; then :; else
-+ eval "$lt_user_locale
-+ $my_cmd"
-+ my_status=$?
-+ eval "$lt_safe_locale"
-+ if test "$my_status" -eq 0; then :; else
-+ eval "(exit $my_status); $my_fail_exp"
-+ fi
-+ fi
-+}
-+
-+
-+
-+
-+
-+# func_version
-+# Echo version message to standard output and exit.
-+func_version ()
-+{
-+ $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
-+ s/^# //
-+ s/^# *$//
-+ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
-+ p
-+ }' < "$progpath"
-+ exit $?
-+}
-+
-+# func_usage
-+# Echo short help message to standard output and exit.
-+func_usage ()
-+{
-+ $SED -n '/^# Usage:/,/# -h/ {
-+ s/^# //
-+ s/^# *$//
-+ s/\$progname/'$progname'/
-+ p
-+ }' < "$progpath"
-+ $ECHO
-+ $ECHO "run \`$progname --help | more' for full usage"
-+ exit $?
-+}
-+
-+# func_help
-+# Echo long help message to standard output and exit.
-+func_help ()
-+{
-+ $SED -n '/^# Usage:/,/# Report bugs to/ {
-+ s/^# //
-+ s/^# *$//
-+ s*\$progname*'$progname'*
-+ s*\$host*'"$host"'*
-+ s*\$SHELL*'"$SHELL"'*
-+ s*\$LTCC*'"$LTCC"'*
-+ s*\$LTCFLAGS*'"$LTCFLAGS"'*
-+ s*\$LD*'"$LD"'*
-+ s/\$with_gnu_ld/'"$with_gnu_ld"'/
-+ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
-+ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
-+ p
-+ }' < "$progpath"
-+ exit $?
-+}
-+
-+# func_missing_arg argname
-+# Echo program name prefixed message to standard error and set global
-+# exit_cmd.
-+func_missing_arg ()
-+{
-+ func_error "missing argument for $1"
-+ exit_cmd=exit
-+}
-+
-+exit_cmd=:
-+
-+
-+
-+
-+
-+# Check that we have a working $ECHO.
-+if test "X$1" = X--no-reexec; then
-+ # Discard the --no-reexec flag, and continue.
-+ shift
-+elif test "X$1" = X--fallback-echo; then
-+ # Avoid inline document here, it may be left over
-+ :
-+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
-+ # Yippee, $ECHO works!
-+ :
-+else
-+ # Restart under the correct shell, and then maybe $ECHO will work.
-+ exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-+fi
-+
-+if test "X$1" = X--fallback-echo; then
-+ # used as fallback echo
-+ shift
-+ cat <<EOF
-+$*
-+EOF
-+ exit $EXIT_SUCCESS
-+fi
-+
-+magic="%%%MAGIC variable%%%"
-+magic_exe="%%%MAGIC EXE variable%%%"
-+
-+# Global variables.
-+# $mode is unset
-+nonopt=
-+execute_dlfiles=
-+preserve_args=
-+lo2o="s/\\.lo\$/.${objext}/"
-+o2lo="s/\\.${objext}\$/.lo/"
-+extracted_archives=
-+extracted_serial=0
-+
-+opt_dry_run=false
-+opt_duplicate_deps=false
-+opt_silent=false
-+opt_debug=:
-+
-+# If this variable is set in any of the actions, the command in it
-+# will be execed at the end. This prevents here-documents from being
-+# left over by shells.
-+exec_cmd=
-+
-+# func_fatal_configuration arg...
-+# Echo program name prefixed message to standard error, followed by
-+# a configuration failure hint, and exit.
-+func_fatal_configuration ()
-+{
-+ func_error ${1+"$@"}
-+ func_error "See the $PACKAGE documentation for more information."
-+ func_fatal_error "Fatal configuration error."
-+}
-+
-+
-+# func_config
-+# Display the configuration for all the tags in this script.
-+func_config ()
-+{
-+ re_begincf='^# ### BEGIN LIBTOOL'
-+ re_endcf='^# ### END LIBTOOL'
-+
-+ # Default configuration.
-+ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
-+
-+ # Now print the configurations for the tags.
-+ for tagname in $taglist; do
-+ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
-+ done
-+
-+ exit $?
-+}
-+
-+# func_features
-+# Display the features supported by this script.
-+func_features ()
-+{
-+ $ECHO "host: $host"
-+ if test "$build_libtool_libs" = yes; then
-+ $ECHO "enable shared libraries"
-+ else
-+ $ECHO "disable shared libraries"
-+ fi
-+ if test "$build_old_libs" = yes; then
-+ $ECHO "enable static libraries"
-+ else
-+ $ECHO "disable static libraries"
-+ fi
-+
-+ exit $?
-+}
-+
-+# func_enable_tag tagname
-+# Verify that TAGNAME is valid, and either flag an error and exit, or
-+# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
-+# variable here.
-+func_enable_tag ()
-+{
-+ # Global variable:
-+ tagname="$1"
-+
-+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
-+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
-+ sed_extractcf="/$re_begincf/,/$re_endcf/p"
-+
-+ # Validate tagname.
-+ case $tagname in
-+ *[!-_A-Za-z0-9,/]*)
-+ func_fatal_error "invalid tag name: $tagname"
-+ ;;
-+ esac
-+
-+ # Don't test for the "default" C tag, as we know it's
-+ # there but not specially marked.
-+ case $tagname in
-+ CC) ;;
-+ *)
-+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
-+ taglist="$taglist $tagname"
-+
-+ # Evaluate the configuration. Be careful to quote the path
-+ # and the sed script, to avoid splitting on whitespace, but
-+ # also don't use non-portable quotes within backquotes within
-+ # quotes we have to do it in 2 steps:
-+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
-+ eval "$extractedcf"
-+ else
-+ func_error "ignoring unknown tag $tagname"
-+ fi
-+ ;;
-+ esac
-+}
-+
-+# Parse options once, thoroughly. This comes as soon as possible in
-+# the script to make things like `libtool --version' happen quickly.
-+{
-+
-+ # Shorthand for --mode=foo, only valid as the first argument
-+ case $1 in
-+ clean|clea|cle|cl)
-+ shift; set dummy --mode clean ${1+"$@"}; shift
-+ ;;
-+ compile|compil|compi|comp|com|co|c)
-+ shift; set dummy --mode compile ${1+"$@"}; shift
-+ ;;
-+ execute|execut|execu|exec|exe|ex|e)
-+ shift; set dummy --mode execute ${1+"$@"}; shift
-+ ;;
-+ finish|finis|fini|fin|fi|f)
-+ shift; set dummy --mode finish ${1+"$@"}; shift
-+ ;;
-+ install|instal|insta|inst|ins|in|i)
-+ shift; set dummy --mode install ${1+"$@"}; shift
-+ ;;
-+ link|lin|li|l)
-+ shift; set dummy --mode link ${1+"$@"}; shift
-+ ;;
-+ uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
-+ shift; set dummy --mode uninstall ${1+"$@"}; shift
-+ ;;
-+ esac
-+
-+ # Parse non-mode specific arguments:
-+ while test "$#" -gt 0; do
-+ opt="$1"
-+ shift
-+
-+ case $opt in
-+ --config) func_config ;;
-+
-+ --debug) preserve_args="$preserve_args $opt"
-+ func_echo "enabling shell trace mode"
-+ opt_debug='set -x'
-+ $opt_debug
-+ ;;
-+
-+ -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break
-+ execute_dlfiles="$execute_dlfiles $1"
-+ shift
-+ ;;
-+
-+ --dry-run | -n) opt_dry_run=: ;;
-+ --features) func_features ;;
-+ --finish) mode="finish" ;;
-+
-+ --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break
-+ case $1 in
-+ # Valid mode arguments:
-+ clean) ;;
-+ compile) ;;
-+ execute) ;;
-+ finish) ;;
-+ install) ;;
-+ link) ;;
-+ relink) ;;
-+ uninstall) ;;
-+
-+ # Catch anything else as an error
-+ *) func_error "invalid argument for $opt"
-+ exit_cmd=exit
-+ break
-+ ;;
-+ esac
-+
-+ mode="$1"
-+ shift
-+ ;;
-+
-+ --preserve-dup-deps)
-+ opt_duplicate_deps=: ;;
-+
-+ --quiet|--silent) preserve_args="$preserve_args $opt"
-+ opt_silent=:
-+ ;;
-+
-+ --verbose| -v) preserve_args="$preserve_args $opt"
-+ opt_silent=false
-+ ;;
-+
-+ --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break
-+ preserve_args="$preserve_args $opt $1"
-+ func_enable_tag "$1" # tagname is set here
-+ shift
-+ ;;
-+
-+ # Separate optargs to long options:
-+ -dlopen=*|--mode=*|--tag=*)
-+ func_opt_split "$opt"
-+ set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
-+ shift
-+ ;;
-+
-+ -\?|-h) func_usage ;;
-+ --help) opt_help=: ;;
-+ --version) func_version ;;
-+
-+ -*) func_fatal_help "unrecognized option \`$opt'" ;;
-+
-+ *) nonopt="$opt"
-+ break
-+ ;;
-+ esac
-+ done
-+
-+
-+ case $host in
-+ *cygwin* | *mingw* | *pw32* | *cegcc*)
-+ # don't eliminate duplications in $postdeps and $predeps
-+ opt_duplicate_compiler_generated_deps=:
-+ ;;
-+ *)
-+ opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
-+ ;;
-+ esac
-+
-+ # Having warned about all mis-specified options, bail out if
-+ # anything was wrong.
-+ $exit_cmd $EXIT_FAILURE
-+}
-+
-+# func_check_version_match
-+# Ensure that we are using m4 macros, and libtool script from the same
-+# release of libtool.
-+func_check_version_match ()
-+{
-+ if test "$package_revision" != "$macro_revision"; then
-+ if test "$VERSION" != "$macro_version"; then
-+ if test -z "$macro_version"; then
-+ cat >&2 <<_LT_EOF
-+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
-+$progname: definition of this LT_INIT comes from an older release.
-+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-+$progname: and run autoconf again.
-+_LT_EOF
-+ else
-+ cat >&2 <<_LT_EOF
-+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
-+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
-+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-+$progname: and run autoconf again.
-+_LT_EOF
-+ fi
-+ else
-+ cat >&2 <<_LT_EOF
-+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
-+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
-+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
-+$progname: of $PACKAGE $VERSION and run autoconf again.
-+_LT_EOF
-+ fi
-+
-+ exit $EXIT_MISMATCH
-+ fi
-+}
-+
-+
-+## ----------- ##
-+## Main. ##
-+## ----------- ##
-+
-+$opt_help || {
-+ # Sanity checks first:
-+ func_check_version_match
-+
-+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-+ func_fatal_configuration "not configured to build any kind of library"
-+ fi
-+
-+ test -z "$mode" && func_fatal_error "error: you must specify a MODE."
-+
-+
-+ # Darwin sucks
-+ eval std_shrext=\"$shrext_cmds\"
-+
-+
-+ # Only execute mode is allowed to have -dlopen flags.
-+ if test -n "$execute_dlfiles" && test "$mode" != execute; then
-+ func_error "unrecognized option \`-dlopen'"
-+ $ECHO "$help" 1>&2
-+ exit $EXIT_FAILURE
-+ fi
-+
-+ # Change the help message to a mode-specific one.
-+ generic_help="$help"
-+ help="Try \`$progname --help --mode=$mode' for more information."
-+}
-+
-+
-+# func_lalib_p file
-+# True iff FILE is a libtool `.la' library or `.lo' object file.
-+# This function is only a basic sanity check; it will hardly flush out
-+# determined imposters.
-+func_lalib_p ()
-+{
-+ test -f "$1" &&
-+ $SED -e 4q "$1" 2>/dev/null \
-+ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
-+}
-+
-+# func_lalib_unsafe_p file
-+# True iff FILE is a libtool `.la' library or `.lo' object file.
-+# This function implements the same check as func_lalib_p without
-+# resorting to external programs. To this end, it redirects stdin and
-+# closes it afterwards, without saving the original file descriptor.
-+# As a safety measure, use it only where a negative result would be
-+# fatal anyway. Works if `file' does not exist.
-+func_lalib_unsafe_p ()
-+{
-+ lalib_p=no
-+ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
-+ for lalib_p_l in 1 2 3 4
-+ do
-+ read lalib_p_line
-+ case "$lalib_p_line" in
-+ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
-+ esac
-+ done
-+ exec 0<&5 5<&-
-+ fi
-+ test "$lalib_p" = yes
-+}
-+
-+# func_ltwrapper_script_p file
-+# True iff FILE is a libtool wrapper script
-+# This function is only a basic sanity check; it will hardly flush out
-+# determined imposters.
-+func_ltwrapper_script_p ()
-+{
-+ func_lalib_p "$1"
-+}
-+
-+# func_ltwrapper_executable_p file
-+# True iff FILE is a libtool wrapper executable
-+# This function is only a basic sanity check; it will hardly flush out
-+# determined imposters.
-+func_ltwrapper_executable_p ()
-+{
-+ func_ltwrapper_exec_suffix=
-+ case $1 in
-+ *.exe) ;;
-+ *) func_ltwrapper_exec_suffix=.exe ;;
-+ esac
-+ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
-+}
-+
-+# func_ltwrapper_scriptname file
-+# Assumes file is an ltwrapper_executable
-+# uses $file to determine the appropriate filename for a
-+# temporary ltwrapper_script.
-+func_ltwrapper_scriptname ()
-+{
-+ func_ltwrapper_scriptname_result=""
-+ if func_ltwrapper_executable_p "$1"; then
-+ func_dirname_and_basename "$1" "" "."
-+ func_stripname '' '.exe' "$func_basename_result"
-+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
-+ fi
-+}
-+
-+# func_ltwrapper_p file
-+# True iff FILE is a libtool wrapper script or wrapper executable
-+# This function is only a basic sanity check; it will hardly flush out
-+# determined imposters.
-+func_ltwrapper_p ()
-+{
-+ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
-+}
-+
-+
-+# func_execute_cmds commands fail_cmd
-+# Execute tilde-delimited COMMANDS.
-+# If FAIL_CMD is given, eval that upon failure.
-+# FAIL_CMD may read-access the current command in variable CMD!
-+func_execute_cmds ()
-+{
-+ $opt_debug
-+ save_ifs=$IFS; IFS='~'
-+ for cmd in $1; do
-+ IFS=$save_ifs
-+ eval cmd=\"$cmd\"
-+ func_show_eval "$cmd" "${2-:}"
-+ done
-+ IFS=$save_ifs
-+}
-+
-+
-+# func_source file
-+# Source FILE, adding directory component if necessary.
-+# Note that it is not necessary on cygwin/mingw to append a dot to
-+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
-+# behavior happens only for exec(3), not for open(2)! Also, sourcing
-+# `FILE.' does not work on cygwin managed mounts.
-+func_source ()
-+{
-+ $opt_debug
-+ case $1 in
-+ */* | *\\*) . "$1" ;;
-+ *) . "./$1" ;;
-+ esac
-+}
-+
-+
-+# func_infer_tag arg
-+# Infer tagged configuration to use if any are available and
-+# if one wasn't chosen via the "--tag" command line option.
-+# Only attempt this if the compiler in the base compile
-+# command doesn't match the default compiler.
-+# arg is usually of the form 'gcc ...'
-+func_infer_tag ()
-+{
-+ $opt_debug
-+ if test -n "$available_tags" && test -z "$tagname"; then
-+ CC_quoted=
-+ for arg in $CC; do
-+ func_quote_for_eval "$arg"
-+ CC_quoted="$CC_quoted $func_quote_for_eval_result"
-+ done
-+ case $@ in
-+ # Blanks in the command may have been stripped by the calling shell,
-+ # but not from the CC environment variable when configure was run.
-+ " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
-+ # Blanks at the start of $base_compile will cause this to fail
-+ # if we don't check for them as well.
-+ *)
-+ for z in $available_tags; do
-+ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
-+ # Evaluate the configuration.
-+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
-+ CC_quoted=
-+ for arg in $CC; do
-+ # Double-quote args containing other shell metacharacters.
-+ func_quote_for_eval "$arg"
-+ CC_quoted="$CC_quoted $func_quote_for_eval_result"
-+ done
-+ case "$@ " in
-+ " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
-+ # The compiler in the base compile command matches
-+ # the one in the tagged configuration.
-+ # Assume this is the tagged configuration we want.
-+ tagname=$z
-+ break
-+ ;;
-+ esac
-+ fi
-+ done
-+ # If $tagname still isn't set, then no tagged configuration
-+ # was found and let the user know that the "--tag" command
-+ # line option must be used.
-+ if test -z "$tagname"; then
-+ func_echo "unable to infer tagged configuration"
-+ func_fatal_error "specify a tag with \`--tag'"
-+# else
-+# func_verbose "using $tagname tagged configuration"
-+ fi
-+ ;;
-+ esac
-+ fi
-+}
-+
-+
-+
-+# func_write_libtool_object output_name pic_name nonpic_name
-+# Create a libtool object file (analogous to a ".la" file),
-+# but don't create it if we're doing a dry run.
-+func_write_libtool_object ()
-+{
-+ write_libobj=${1}
-+ if test "$build_libtool_libs" = yes; then
-+ write_lobj=\'${2}\'
-+ else
-+ write_lobj=none
-+ fi
-+
-+ if test "$build_old_libs" = yes; then
-+ write_oldobj=\'${3}\'
-+ else
-+ write_oldobj=none
-+ fi
-+
-+ $opt_dry_run || {
-+ cat >${write_libobj}T <<EOF
-+# $write_libobj - a libtool object file
-+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-+#
-+# Please DO NOT delete this file!
-+# It is necessary for linking the library.
-+
-+# Name of the PIC object.
-+pic_object=$write_lobj
-+
-+# Name of the non-PIC object
-+non_pic_object=$write_oldobj
-+
-+EOF
-+ $MV "${write_libobj}T" "${write_libobj}"
-+ }
-+}
-+
-+# func_mode_compile arg...
-+func_mode_compile ()
-+{
-+ $opt_debug
-+ # Get the compilation command and the source file.
-+ base_compile=
-+ srcfile="$nonopt" # always keep a non-empty value in "srcfile"
-+ suppress_opt=yes
-+ suppress_output=
-+ arg_mode=normal
-+ libobj=
-+ later=
-+ pie_flag=
-+
-+ for arg
-+ do
-+ case $arg_mode in
-+ arg )
-+ # do not "continue". Instead, add this to base_compile
-+ lastarg="$arg"
-+ arg_mode=normal
-+ ;;
-+
-+ target )
-+ libobj="$arg"
-+ arg_mode=normal
-+ continue
-+ ;;
-+
-+ normal )
-+ # Accept any command-line options.
-+ case $arg in
-+ -o)
-+ test -n "$libobj" && \
-+ func_fatal_error "you cannot specify \`-o' more than once"
-+ arg_mode=target
-+ continue
-+ ;;
-+
-+ -pie | -fpie | -fPIE)
-+ pie_flag="$pie_flag $arg"
-+ continue
-+ ;;
-+
-+ -shared | -static | -prefer-pic | -prefer-non-pic)
-+ later="$later $arg"
-+ continue
-+ ;;
-+
-+ -no-suppress)
-+ suppress_opt=no
-+ continue
-+ ;;
-+
-+ -Xcompiler)
-+ arg_mode=arg # the next one goes into the "base_compile" arg list
-+ continue # The current "srcfile" will either be retained or
-+ ;; # replaced later. I would guess that would be a bug.
-+
-+ -Wc,*)
-+ func_stripname '-Wc,' '' "$arg"
-+ args=$func_stripname_result
-+ lastarg=
-+ save_ifs="$IFS"; IFS=','
-+ for arg in $args; do
-+ IFS="$save_ifs"
-+ func_quote_for_eval "$arg"
-+ lastarg="$lastarg $func_quote_for_eval_result"
-+ done
-+ IFS="$save_ifs"
-+ func_stripname ' ' '' "$lastarg"
-+ lastarg=$func_stripname_result
-+
-+ # Add the arguments to base_compile.
-+ base_compile="$base_compile $lastarg"
-+ continue
-+ ;;
-+
-+ *)
-+ # Accept the current argument as the source file.
-+ # The previous "srcfile" becomes the current argument.
-+ #
-+ lastarg="$srcfile"
-+ srcfile="$arg"
-+ ;;
-+ esac # case $arg
-+ ;;
-+ esac # case $arg_mode
-+
-+ # Aesthetically quote the previous argument.
-+ func_quote_for_eval "$lastarg"
-+ base_compile="$base_compile $func_quote_for_eval_result"
-+ done # for arg
-+
-+ case $arg_mode in
-+ arg)
-+ func_fatal_error "you must specify an argument for -Xcompile"
-+ ;;
-+ target)
-+ func_fatal_error "you must specify a target with \`-o'"
-+ ;;
-+ *)
-+ # Get the name of the library object.
-+ test -z "$libobj" && {
-+ func_basename "$srcfile"
-+ libobj="$func_basename_result"
-+ }
-+ ;;
-+ esac
-+
-+ # Recognize several different file suffixes.
-+ # If the user specifies -o file.o, it is replaced with file.lo
-+ case $libobj in
-+ *.[cCFSifmso] | \
-+ *.ada | *.adb | *.ads | *.asm | \
-+ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
-+ *.[fF][09]? | *.for | *.java | *.obj | *.sx)
-+ func_xform "$libobj"
-+ libobj=$func_xform_result
-+ ;;
-+ esac
-+
-+ case $libobj in
-+ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
-+ *)
-+ func_fatal_error "cannot determine name of library object from \`$libobj'"
-+ ;;
-+ esac
-+
-+ func_infer_tag $base_compile
-+
-+ for arg in $later; do
-+ case $arg in
-+ -shared)
-+ test "$build_libtool_libs" != yes && \
-+ func_fatal_configuration "can not build a shared library"
-+ build_old_libs=no
-+ continue
-+ ;;
-+
-+ -static)
-+ build_libtool_libs=no
-+ build_old_libs=yes
-+ continue
-+ ;;
-+
-+ -prefer-pic)
-+ pic_mode=yes
-+ continue
-+ ;;
-+
-+ -prefer-non-pic)
-+ pic_mode=no
-+ continue
-+ ;;
-+ esac
-+ done
-+
-+ func_quote_for_eval "$libobj"
-+ test "X$libobj" != "X$func_quote_for_eval_result" \
-+ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
-+ && func_warning "libobj name \`$libobj' may not contain shell special characters."
-+ func_dirname_and_basename "$obj" "/" ""
-+ objname="$func_basename_result"
-+ xdir="$func_dirname_result"
-+ lobj=${xdir}$objdir/$objname
-+
-+ test -z "$base_compile" && \
-+ func_fatal_help "you must specify a compilation command"
-+
-+ # Delete any leftover library objects.
-+ if test "$build_old_libs" = yes; then
-+ removelist="$obj $lobj $libobj ${libobj}T"
-+ else
-+ removelist="$lobj $libobj ${libobj}T"
-+ fi
-+
-+ # On Cygwin there's no "real" PIC flag so we must build both object types
-+ case $host_os in
-+ cygwin* | mingw* | pw32* | os2* | cegcc*)
-+ pic_mode=default
-+ ;;
-+ esac
-+ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
-+ # non-PIC code in shared libraries is not supported
-+ pic_mode=default
-+ fi
-+
-+ # Calculate the filename of the output object if compiler does
-+ # not support -o with -c
-+ if test "$compiler_c_o" = no; then
-+ output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
-+ lockfile="$output_obj.lock"
-+ else
-+ output_obj=
-+ need_locks=no
-+ lockfile=
-+ fi
-+
-+ # Lock this critical section if it is needed
-+ # We use this script file to make the link, it avoids creating a new file
-+ if test "$need_locks" = yes; then
-+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
-+ func_echo "Waiting for $lockfile to be removed"
-+ sleep 2
-+ done
-+ elif test "$need_locks" = warn; then
-+ if test -f "$lockfile"; then
-+ $ECHO "\
-+*** ERROR, $lockfile exists and contains:
-+`cat $lockfile 2>/dev/null`
-+
-+This indicates that another process is trying to use the same
-+temporary object file, and libtool could not work around it because
-+your compiler does not support \`-c' and \`-o' together. If you
-+repeat this compilation, it may succeed, by chance, but you had better
-+avoid parallel builds (make -j) in this platform, or get a better
-+compiler."
-+
-+ $opt_dry_run || $RM $removelist
-+ exit $EXIT_FAILURE
-+ fi
-+ removelist="$removelist $output_obj"
-+ $ECHO "$srcfile" > "$lockfile"
-+ fi
-+
-+ $opt_dry_run || $RM $removelist
-+ removelist="$removelist $lockfile"
-+ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
-+
-+ if test -n "$fix_srcfile_path"; then
-+ eval srcfile=\"$fix_srcfile_path\"
-+ fi
-+ func_quote_for_eval "$srcfile"
-+ qsrcfile=$func_quote_for_eval_result
-+
-+ # Only build a PIC object if we are building libtool libraries.
-+ if test "$build_libtool_libs" = yes; then
-+ # Without this assignment, base_compile gets emptied.
-+ fbsd_hideous_sh_bug=$base_compile
-+
-+ if test "$pic_mode" != no; then
-+ command="$base_compile $qsrcfile $pic_flag"
-+ else
-+ # Don't build PIC code
-+ command="$base_compile $qsrcfile"
-+ fi
-+
-+ func_mkdir_p "$xdir$objdir"
-+
-+ if test -z "$output_obj"; then
-+ # Place PIC objects in $objdir
-+ command="$command -o $lobj"
-+ fi
-+
-+ func_show_eval_locale "$command" \
-+ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
-+
-+ if test "$need_locks" = warn &&
-+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-+ $ECHO "\
-+*** ERROR, $lockfile contains:
-+`cat $lockfile 2>/dev/null`
-+
-+but it should contain:
-+$srcfile
-+
-+This indicates that another process is trying to use the same
-+temporary object file, and libtool could not work around it because
-+your compiler does not support \`-c' and \`-o' together. If you
-+repeat this compilation, it may succeed, by chance, but you had better
-+avoid parallel builds (make -j) in this platform, or get a better
-+compiler."
-+
-+ $opt_dry_run || $RM $removelist
-+ exit $EXIT_FAILURE
-+ fi
-+
-+ # Just move the object if needed, then go on to compile the next one
-+ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
-+ func_show_eval '$MV "$output_obj" "$lobj"' \
-+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
-+ fi
-+
-+ # Allow error messages only from the first compilation.
-+ if test "$suppress_opt" = yes; then
-+ suppress_output=' >/dev/null 2>&1'
-+ fi
-+ fi
-+
-+ # Only build a position-dependent object if we build old libraries.
-+ if test "$build_old_libs" = yes; then
-+ if test "$pic_mode" != yes; then
-+ # Don't build PIC code
-+ command="$base_compile $qsrcfile$pie_flag"
-+ else
-+ command="$base_compile $qsrcfile $pic_flag"
-+ fi
-+ if test "$compiler_c_o" = yes; then
-+ command="$command -o $obj"
-+ fi
-+
-+ # Suppress compiler output if we already did a PIC compilation.
-+ command="$command$suppress_output"
-+ func_show_eval_locale "$command" \
-+ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
-+
-+ if test "$need_locks" = warn &&
-+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-+ $ECHO "\
-+*** ERROR, $lockfile contains:
-+`cat $lockfile 2>/dev/null`
-+
-+but it should contain:
-+$srcfile
-+
-+This indicates that another process is trying to use the same
-+temporary object file, and libtool could not work around it because
-+your compiler does not support \`-c' and \`-o' together. If you
-+repeat this compilation, it may succeed, by chance, but you had better
-+avoid parallel builds (make -j) in this platform, or get a better
-+compiler."
-+
-+ $opt_dry_run || $RM $removelist
-+ exit $EXIT_FAILURE
-+ fi
-+
-+ # Just move the object if needed
-+ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
-+ func_show_eval '$MV "$output_obj" "$obj"' \
-+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
-+ fi
-+ fi
-+
-+ $opt_dry_run || {
-+ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
-+
-+ # Unlock the critical section if it was locked
-+ if test "$need_locks" != no; then
-+ removelist=$lockfile
-+ $RM "$lockfile"
-+ fi
-+ }
-+
-+ exit $EXIT_SUCCESS
-+}
-+
-+$opt_help || {
-+test "$mode" = compile && func_mode_compile ${1+"$@"}
-+}
-+
-+func_mode_help ()
-+{
-+ # We need to display help for each of the modes.
-+ case $mode in
-+ "")
-+ # Generic help is extracted from the usage comments
-+ # at the start of this file.
-+ func_help
-+ ;;
-+
-+ clean)
-+ $ECHO \
-+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-+
-+Remove files from the build directory.
-+
-+RM is the name of the program to use to delete files associated with each FILE
-+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-+to RM.
-+
-+If FILE is a libtool library, object or program, all the files associated
-+with it are deleted. Otherwise, only FILE itself is deleted using RM."
-+ ;;
-+
-+ compile)
-+ $ECHO \
-+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-+
-+Compile a source file into a libtool library object.
-+
-+This mode accepts the following additional options:
-+
-+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
-+ -no-suppress do not suppress compiler output for multiple passes
-+ -prefer-pic try to building PIC objects only
-+ -prefer-non-pic try to building non-PIC objects only
-+ -shared do not build a \`.o' file suitable for static linking
-+ -static only build a \`.o' file suitable for static linking
-+
-+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-+from the given SOURCEFILE.
-+
-+The output file name is determined by removing the directory component from
-+SOURCEFILE, then substituting the C source code suffix \`.c' with the
-+library object suffix, \`.lo'."
-+ ;;
-+
-+ execute)
-+ $ECHO \
-+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
-+
-+Automatically set library path, then run a program.
-+
-+This mode accepts the following additional options:
-+
-+ -dlopen FILE add the directory containing FILE to the library path
-+
-+This mode sets the library path environment variable according to \`-dlopen'
-+flags.
-+
-+If any of the ARGS are libtool executable wrappers, then they are translated
-+into their corresponding uninstalled binary, and any of their required library
-+directories are added to the library path.
-+
-+Then, COMMAND is executed, with ARGS as arguments."
-+ ;;
-+
-+ finish)
-+ $ECHO \
-+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
-+
-+Complete the installation of libtool libraries.
-+
-+Each LIBDIR is a directory that contains libtool libraries.
-+
-+The commands that this mode executes may require superuser privileges. Use
-+the \`--dry-run' option if you just want to see what would be executed."
-+ ;;
-+
-+ install)
-+ $ECHO \
-+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
-+
-+Install executables or libraries.
-+
-+INSTALL-COMMAND is the installation command. The first component should be
-+either the \`install' or \`cp' program.
-+
-+The following components of INSTALL-COMMAND are treated specially:
-+
-+ -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation
-+
-+The rest of the components are interpreted as arguments to that command (only
-+BSD-compatible install options are recognized)."
-+ ;;
-+
-+ link)
-+ $ECHO \
-+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
-+
-+Link object files or libraries together to form another library, or to
-+create an executable program.
-+
-+LINK-COMMAND is a command using the C compiler that you would use to create
-+a program from several object files.
-+
-+The following components of LINK-COMMAND are treated specially:
-+
-+ -all-static do not do any dynamic linking at all
-+ -avoid-version do not add a version suffix if possible
-+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
-+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-+ -export-symbols SYMFILE
-+ try to export only the symbols listed in SYMFILE
-+ -export-symbols-regex REGEX
-+ try to export only the symbols matching REGEX
-+ -LLIBDIR search LIBDIR for required installed libraries
-+ -lNAME OUTPUT-FILE requires the installed library libNAME
-+ -module build a library that can dlopened
-+ -no-fast-install disable the fast-install mode
-+ -no-install link a not-installable executable
-+ -no-undefined declare that a library does not refer to external symbols
-+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
-+ -objectlist FILE Use a list of object files found in FILE to specify objects
-+ -precious-files-regex REGEX
-+ don't remove output files matching REGEX
-+ -release RELEASE specify package release information
-+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
-+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
-+ -shared only do dynamic linking of libtool libraries
-+ -shrext SUFFIX override the standard shared library file extension
-+ -static do not do any dynamic linking of uninstalled libtool libraries
-+ -static-libtool-libs
-+ do not do any dynamic linking of libtool libraries
-+ -version-info CURRENT[:REVISION[:AGE]]
-+ specify library version info [each variable defaults to 0]
-+ -weak LIBNAME declare that the target provides the LIBNAME interface
-+
-+All other options (arguments beginning with \`-') are ignored.
-+
-+Every other argument is treated as a filename. Files ending in \`.la' are
-+treated as uninstalled libtool libraries, other files are standard or library
-+object files.
-+
-+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-+only library objects (\`.lo' files) may be specified, and \`-rpath' is
-+required, except when creating a convenience library.
-+
-+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-+using \`ar' and \`ranlib', or on Windows using \`lib'.
-+
-+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-+is created, otherwise an executable program is created."
-+ ;;
-+
-+ uninstall)
-+ $ECHO \
-+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-+
-+Remove libraries from an installation directory.
-+
-+RM is the name of the program to use to delete files associated with each FILE
-+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-+to RM.
-+
-+If FILE is a libtool library, all the files associated with it are deleted.
-+Otherwise, only FILE itself is deleted using RM."
-+ ;;
-+
-+ *)
-+ func_fatal_help "invalid operation mode \`$mode'"
-+ ;;
-+ esac
-+
-+ $ECHO
-+ $ECHO "Try \`$progname --help' for more information about other modes."
-+
-+ exit $?
-+}
-+
-+ # Now that we've collected a possible --mode arg, show help if necessary
-+ $opt_help && func_mode_help
-+
-+
-+# func_mode_execute arg...
-+func_mode_execute ()
-+{
-+ $opt_debug
-+ # The first argument is the command name.
-+ cmd="$nonopt"
-+ test -z "$cmd" && \
-+ func_fatal_help "you must specify a COMMAND"
-+
-+ # Handle -dlopen flags immediately.
-+ for file in $execute_dlfiles; do
-+ test -f "$file" \
-+ || func_fatal_help "\`$file' is not a file"
-+
-+ dir=
-+ case $file in
-+ *.la)
-+ # Check to see that this really is a libtool archive.
-+ func_lalib_unsafe_p "$file" \
-+ || func_fatal_help "\`$lib' is not a valid libtool archive"
-+
-+ # Read the libtool library.
-+ dlname=
-+ library_names=
-+ func_source "$file"
-+
-+ # Skip this library if it cannot be dlopened.
-+ if test -z "$dlname"; then
-+ # Warn if it was a shared library.
-+ test -n "$library_names" && \
-+ func_warning "\`$file' was not linked with \`-export-dynamic'"
-+ continue
-+ fi
-+
-+ func_dirname "$file" "" "."
-+ dir="$func_dirname_result"
-+
-+ if test -f "$dir/$objdir/$dlname"; then
-+ dir="$dir/$objdir"
-+ else
-+ if test ! -f "$dir/$dlname"; then
-+ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
-+ fi
-+ fi
-+ ;;
-+
-+ *.lo)
-+ # Just add the directory containing the .lo file.
-+ func_dirname "$file" "" "."
-+ dir="$func_dirname_result"
-+ ;;
-+
-+ *)
-+ func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
-+ continue
-+ ;;
-+ esac
-+
-+ # Get the absolute pathname.
-+ absdir=`cd "$dir" && pwd`
-+ test -n "$absdir" && dir="$absdir"
-+
-+ # Now add the directory to shlibpath_var.
-+ if eval "test -z \"\$$shlibpath_var\""; then
-+ eval "$shlibpath_var=\"\$dir\""
-+ else
-+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-+ fi
-+ done
-+
-+ # This variable tells wrapper scripts just to set shlibpath_var
-+ # rather than running their programs.
-+ libtool_execute_magic="$magic"
-+
-+ # Check if any of the arguments is a wrapper script.
-+ args=
-+ for file
-+ do
-+ case $file in
-+ -*) ;;
-+ *)
-+ # Do a test to see if this is really a libtool program.
-+ if func_ltwrapper_script_p "$file"; then
-+ func_source "$file"
-+ # Transform arg to wrapped name.
-+ file="$progdir/$program"
-+ elif func_ltwrapper_executable_p "$file"; then
-+ func_ltwrapper_scriptname "$file"
-+ func_source "$func_ltwrapper_scriptname_result"
-+ # Transform arg to wrapped name.
-+ file="$progdir/$program"
-+ fi
-+ ;;
-+ esac
-+ # Quote arguments (to preserve shell metacharacters).
-+ func_quote_for_eval "$file"
-+ args="$args $func_quote_for_eval_result"
-+ done
-+
-+ if test "X$opt_dry_run" = Xfalse; then
-+ if test -n "$shlibpath_var"; then
-+ # Export the shlibpath_var.
-+ eval "export $shlibpath_var"
-+ fi
-+
-+ # Restore saved environment variables
-+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-+ do
-+ eval "if test \"\${save_$lt_var+set}\" = set; then
-+ $lt_var=\$save_$lt_var; export $lt_var
-+ else
-+ $lt_unset $lt_var
-+ fi"
-+ done
-+
-+ # Now prepare to actually exec the command.
-+ exec_cmd="\$cmd$args"
-+ else
-+ # Display what would be done.
-+ if test -n "$shlibpath_var"; then
-+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
-+ $ECHO "export $shlibpath_var"
-+ fi
-+ $ECHO "$cmd$args"
-+ exit $EXIT_SUCCESS
-+ fi
-+}
-+
-+test "$mode" = execute && func_mode_execute ${1+"$@"}
-+
-+
-+# func_mode_finish arg...
-+func_mode_finish ()
-+{
-+ $opt_debug
-+ libdirs="$nonopt"
-+ admincmds=
-+
-+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-+ for dir
-+ do
-+ libdirs="$libdirs $dir"
-+ done
-+
-+ for libdir in $libdirs; do
-+ if test -n "$finish_cmds"; then
-+ # Do each command in the finish commands.
-+ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
-+'"$cmd"'"'
-+ fi
-+ if test -n "$finish_eval"; then
-+ # Do the single finish_eval.
-+ eval cmds=\"$finish_eval\"
-+ $opt_dry_run || eval "$cmds" || admincmds="$admincmds
-+ $cmds"
-+ fi
-+ done
-+ fi
-+
-+ # Exit here if they wanted silent mode.
-+ $opt_silent && exit $EXIT_SUCCESS
-+
-+ $ECHO "X----------------------------------------------------------------------" | $Xsed
-+ $ECHO "Libraries have been installed in:"
-+ for libdir in $libdirs; do
-+ $ECHO " $libdir"
-+ done
-+ $ECHO
-+ $ECHO "If you ever happen to want to link against installed libraries"
-+ $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
-+ $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
-+ $ECHO "flag during linking and do at least one of the following:"
-+ if test -n "$shlibpath_var"; then
-+ $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable"
-+ $ECHO " during execution"
-+ fi
-+ if test -n "$runpath_var"; then
-+ $ECHO " - add LIBDIR to the \`$runpath_var' environment variable"
-+ $ECHO " during linking"
-+ fi
-+ if test -n "$hardcode_libdir_flag_spec"; then
-+ libdir=LIBDIR
-+ eval flag=\"$hardcode_libdir_flag_spec\"
-+
-+ $ECHO " - use the \`$flag' linker flag"
-+ fi
-+ if test -n "$admincmds"; then
-+ $ECHO " - have your system administrator run these commands:$admincmds"
-+ fi
-+ if test -f /etc/ld.so.conf; then
-+ $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-+ fi
-+ $ECHO
-+
-+ $ECHO "See any operating system documentation about shared libraries for"
-+ case $host in
-+ solaris2.[6789]|solaris2.1[0-9])
-+ $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
-+ $ECHO "pages."
-+ ;;
-+ *)
-+ $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
-+ ;;
-+ esac
-+ $ECHO "X----------------------------------------------------------------------" | $Xsed
-+ exit $EXIT_SUCCESS
-+}
-+
-+test "$mode" = finish && func_mode_finish ${1+"$@"}
-+
-+
-+# func_mode_install arg...
-+func_mode_install ()
-+{
-+ $opt_debug
-+ # There may be an optional sh(1) argument at the beginning of
-+ # install_prog (especially on Windows NT).
-+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
-+ # Allow the use of GNU shtool's install command.
-+ $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
-+ # Aesthetically quote it.
-+ func_quote_for_eval "$nonopt"
-+ install_prog="$func_quote_for_eval_result "
-+ arg=$1
-+ shift
-+ else
-+ install_prog=
-+ arg=$nonopt
-+ fi
-+
-+ # The real first argument should be the name of the installation program.
-+ # Aesthetically quote it.
-+ func_quote_for_eval "$arg"
-+ install_prog="$install_prog$func_quote_for_eval_result"
-+
-+ # We need to accept at least all the BSD install flags.
-+ dest=
-+ files=
-+ opts=
-+ prev=
-+ install_type=
-+ isdir=no
-+ stripme=
-+ for arg
-+ do
-+ if test -n "$dest"; then
-+ files="$files $dest"
-+ dest=$arg
-+ continue
-+ fi
-+
-+ case $arg in
-+ -d) isdir=yes ;;
-+ -f)
-+ case " $install_prog " in
-+ *[\\\ /]cp\ *) ;;
-+ *) prev=$arg ;;
-+ esac
-+ ;;
-+ -g | -m | -o)
-+ prev=$arg
-+ ;;
-+ -s)
-+ stripme=" -s"
-+ continue
-+ ;;
-+ -*)
-+ ;;
-+ *)
-+ # If the previous option needed an argument, then skip it.
-+ if test -n "$prev"; then
-+ prev=
-+ else
-+ dest=$arg
-+ continue
-+ fi
-+ ;;
-+ esac
-+
-+ # Aesthetically quote the argument.
-+ func_quote_for_eval "$arg"
-+ install_prog="$install_prog $func_quote_for_eval_result"
-+ done
-+
-+ test -z "$install_prog" && \
-+ func_fatal_help "you must specify an install program"
-+
-+ test -n "$prev" && \
-+ func_fatal_help "the \`$prev' option requires an argument"
-+
-+ if test -z "$files"; then
-+ if test -z "$dest"; then
-+ func_fatal_help "no file or destination specified"
-+ else
-+ func_fatal_help "you must specify a destination"
-+ fi
-+ fi
-+
-+ # Strip any trailing slash from the destination.
-+ func_stripname '' '/' "$dest"
-+ dest=$func_stripname_result
-+
-+ # Check to see that the destination is a directory.
-+ test -d "$dest" && isdir=yes
-+ if test "$isdir" = yes; then
-+ destdir="$dest"
-+ destname=
-+ else
-+ func_dirname_and_basename "$dest" "" "."
-+ destdir="$func_dirname_result"
-+ destname="$func_basename_result"
-+
-+ # Not a directory, so check to see that there is only one file specified.
-+ set dummy $files; shift
-+ test "$#" -gt 1 && \
-+ func_fatal_help "\`$dest' is not a directory"
-+ fi
-+ case $destdir in
-+ [\\/]* | [A-Za-z]:[\\/]*) ;;
-+ *)
-+ for file in $files; do
-+ case $file in
-+ *.lo) ;;
-+ *)
-+ func_fatal_help "\`$destdir' must be an absolute directory name"
-+ ;;
-+ esac
-+ done
-+ ;;
-+ esac
-+
-+ # This variable tells wrapper scripts just to set variables rather
-+ # than running their programs.
-+ libtool_install_magic="$magic"
-+
-+ staticlibs=
-+ future_libdirs=
-+ current_libdirs=
-+ for file in $files; do
-+
-+ # Do each installation.
-+ case $file in
-+ *.$libext)
-+ # Do the static libraries later.
-+ staticlibs="$staticlibs $file"
-+ ;;
-+
-+ *.la)
-+ # Check to see that this really is a libtool archive.
-+ func_lalib_unsafe_p "$file" \
-+ || func_fatal_help "\`$file' is not a valid libtool archive"
-+
-+ library_names=
-+ old_library=
-+ relink_command=
-+ func_source "$file"
-+
-+ # Add the libdir to current_libdirs if it is the destination.
-+ if test "X$destdir" = "X$libdir"; then
-+ case "$current_libdirs " in
-+ *" $libdir "*) ;;
-+ *) current_libdirs="$current_libdirs $libdir" ;;
-+ esac
-+ else
-+ # Note the libdir as a future libdir.
-+ case "$future_libdirs " in
-+ *" $libdir "*) ;;
-+ *) future_libdirs="$future_libdirs $libdir" ;;
-+ esac
-+ fi
-+
-+ func_dirname "$file" "/" ""
-+ dir="$func_dirname_result"
-+ dir="$dir$objdir"
-+
-+ if test -n "$relink_command"; then
-+ # Determine the prefix the user has applied to our future dir.
-+ inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
-+
-+ # Don't allow the user to place us outside of our expected
-+ # location b/c this prevents finding dependent libraries that
-+ # are installed to the same prefix.
-+ # At present, this check doesn't affect windows .dll's that
-+ # are installed into $libdir/../bin (currently, that works fine)
-+ # but it's something to keep an eye on.
-+ test "$inst_prefix_dir" = "$destdir" && \
-+ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
-+
-+ if test -n "$inst_prefix_dir"; then
-+ # Stick the inst_prefix_dir data into the link command.
-+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
-+ else
-+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
-+ fi
-+
-+ func_warning "relinking \`$file'"
-+ func_show_eval "$relink_command" \
-+ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
-+ fi
-+
-+ # See the names of the shared library.
-+ set dummy $library_names; shift
-+ if test -n "$1"; then
-+ realname="$1"
-+ shift
-+
-+ srcname="$realname"
-+ test -n "$relink_command" && srcname="$realname"T
-+
-+ # Install the shared library and build the symlinks.
-+ func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
-+ 'exit $?'
-+ tstripme="$stripme"
-+ case $host_os in
-+ cygwin* | mingw* | pw32* | cegcc*)
-+ case $realname in
-+ *.dll.a)
-+ tstripme=""
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ if test -n "$tstripme" && test -n "$striplib"; then
-+ func_show_eval "$striplib $destdir/$realname" 'exit $?'
-+ fi
-+
-+ if test "$#" -gt 0; then
-+ # Delete the old symlinks, and create new ones.
-+ # Try `ln -sf' first, because the `ln' binary might depend on
-+ # the symlink we replace! Solaris /bin/ln does not understand -f,
-+ # so we also need to try rm && ln -s.
-+ for linkname
-+ do
-+ test "$linkname" != "$realname" \
-+ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
-+ done
-+ fi
-+
-+ # Do each command in the postinstall commands.
-+ lib="$destdir/$realname"
-+ func_execute_cmds "$postinstall_cmds" 'exit $?'
-+ fi
-+
-+ # Install the pseudo-library for information purposes.
-+ func_basename "$file"
-+ name="$func_basename_result"
-+ instname="$dir/$name"i
-+ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
-+
-+ # Maybe install the static library, too.
-+ test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-+ ;;
-+
-+ *.lo)
-+ # Install (i.e. copy) a libtool object.
-+
-+ # Figure out destination file name, if it wasn't already specified.
-+ if test -n "$destname"; then
-+ destfile="$destdir/$destname"
-+ else
-+ func_basename "$file"
-+ destfile="$func_basename_result"
-+ destfile="$destdir/$destfile"
-+ fi
-+
-+ # Deduce the name of the destination old-style object file.
-+ case $destfile in
-+ *.lo)
-+ func_lo2o "$destfile"
-+ staticdest=$func_lo2o_result
-+ ;;
-+ *.$objext)
-+ staticdest="$destfile"
-+ destfile=
-+ ;;
-+ *)
-+ func_fatal_help "cannot copy a libtool object to \`$destfile'"
-+ ;;
-+ esac
-+
-+ # Install the libtool object if requested.
-+ test -n "$destfile" && \
-+ func_show_eval "$install_prog $file $destfile" 'exit $?'
-+
-+ # Install the old object if enabled.
-+ if test "$build_old_libs" = yes; then
-+ # Deduce the name of the old-style object file.
-+ func_lo2o "$file"
-+ staticobj=$func_lo2o_result
-+ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
-+ fi
-+ exit $EXIT_SUCCESS
-+ ;;
-+
-+ *)
-+ # Figure out destination file name, if it wasn't already specified.
-+ if test -n "$destname"; then
-+ destfile="$destdir/$destname"
-+ else
-+ func_basename "$file"
-+ destfile="$func_basename_result"
-+ destfile="$destdir/$destfile"
-+ fi
-+
-+ # If the file is missing, and there is a .exe on the end, strip it
-+ # because it is most likely a libtool script we actually want to
-+ # install
-+ stripped_ext=""
-+ case $file in
-+ *.exe)
-+ if test ! -f "$file"; then
-+ func_stripname '' '.exe' "$file"
-+ file=$func_stripname_result
-+ stripped_ext=".exe"
-+ fi
-+ ;;
-+ esac
-+
-+ # Do a test to see if this is really a libtool program.
-+ case $host in
-+ *cygwin* | *mingw*)
-+ if func_ltwrapper_executable_p "$file"; then
-+ func_ltwrapper_scriptname "$file"
-+ wrapper=$func_ltwrapper_scriptname_result
-+ else
-+ func_stripname '' '.exe' "$file"
-+ wrapper=$func_stripname_result
-+ fi
-+ ;;
-+ *)
-+ wrapper=$file
-+ ;;
-+ esac
-+ if func_ltwrapper_script_p "$wrapper"; then
-+ notinst_deplibs=
-+ relink_command=
-+
-+ func_source "$wrapper"
-+
-+ # Check the variables that should have been set.
-+ test -z "$generated_by_libtool_version" && \
-+ func_fatal_error "invalid libtool wrapper script \`$wrapper'"
-+
-+ finalize=yes
-+ for lib in $notinst_deplibs; do
-+ # Check to see that each library is installed.
-+ libdir=
-+ if test -f "$lib"; then
-+ func_source "$lib"
-+ fi
-+ libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
-+ if test -n "$libdir" && test ! -f "$libfile"; then
-+ func_warning "\`$lib' has not been installed in \`$libdir'"
-+ finalize=no
-+ fi
-+ done
-+
-+ relink_command=
-+ func_source "$wrapper"
-+
-+ outputname=
-+ if test "$fast_install" = no && test -n "$relink_command"; then
-+ $opt_dry_run || {
-+ if test "$finalize" = yes; then
-+ tmpdir=`func_mktempdir`
-+ func_basename "$file$stripped_ext"
-+ file="$func_basename_result"
-+ outputname="$tmpdir/$file"
-+ # Replace the output file specification.
-+ relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-+
-+ $opt_silent || {
-+ func_quote_for_expand "$relink_command"
-+ eval "func_echo $func_quote_for_expand_result"
-+ }
-+ if eval "$relink_command"; then :
-+ else
-+ func_error "error: relink \`$file' with the above command before installing it"
-+ $opt_dry_run || ${RM}r "$tmpdir"
-+ continue
-+ fi
-+ file="$outputname"
-+ else
-+ func_warning "cannot relink \`$file'"
-+ fi
-+ }
-+ else
-+ # Install the binary that we compiled earlier.
-+ file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
-+ fi
-+ fi
-+
-+ # remove .exe since cygwin /usr/bin/install will append another
-+ # one anyway
-+ case $install_prog,$host in
-+ */usr/bin/install*,*cygwin*)
-+ case $file:$destfile in
-+ *.exe:*.exe)
-+ # this is ok
-+ ;;
-+ *.exe:*)
-+ destfile=$destfile.exe
-+ ;;
-+ *:*.exe)
-+ func_stripname '' '.exe' "$destfile"
-+ destfile=$func_stripname_result
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
-+ $opt_dry_run || if test -n "$outputname"; then
-+ ${RM}r "$tmpdir"
-+ fi
-+ ;;
-+ esac
-+ done
-+
-+ for file in $staticlibs; do
-+ func_basename "$file"
-+ name="$func_basename_result"
-+
-+ # Set up the ranlib parameters.
-+ oldlib="$destdir/$name"
-+
-+ func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
-+
-+ if test -n "$stripme" && test -n "$old_striplib"; then
-+ func_show_eval "$old_striplib $oldlib" 'exit $?'
-+ fi
-+
-+ # Do each command in the postinstall commands.
-+ func_execute_cmds "$old_postinstall_cmds" 'exit $?'
-+ done
-+
-+ test -n "$future_libdirs" && \
-+ func_warning "remember to run \`$progname --finish$future_libdirs'"
-+
-+ if test -n "$current_libdirs"; then
-+ # Maybe just do a dry run.
-+ $opt_dry_run && current_libdirs=" -n$current_libdirs"
-+ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
-+ else
-+ exit $EXIT_SUCCESS
-+ fi
-+}
-+
-+test "$mode" = install && func_mode_install ${1+"$@"}
-+
-+
-+# func_generate_dlsyms outputname originator pic_p
-+# Extract symbols from dlprefiles and create ${outputname}S.o with
-+# a dlpreopen symbol table.
-+func_generate_dlsyms ()
-+{
-+ $opt_debug
-+ my_outputname="$1"
-+ my_originator="$2"
-+ my_pic_p="${3-no}"
-+ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
-+ my_dlsyms=
-+
-+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-+ if test -n "$NM" && test -n "$global_symbol_pipe"; then
-+ my_dlsyms="${my_outputname}S.c"
-+ else
-+ func_error "not configured to extract global symbols from dlpreopened files"
-+ fi
-+ fi
-+
-+ if test -n "$my_dlsyms"; then
-+ case $my_dlsyms in
-+ "") ;;
-+ *.c)
-+ # Discover the nlist of each of the dlfiles.
-+ nlist="$output_objdir/${my_outputname}.nm"
-+
-+ func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
-+
-+ # Parse the name list into a source file.
-+ func_verbose "creating $output_objdir/$my_dlsyms"
-+
-+ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
-+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
-+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
-+
-+#ifdef __cplusplus
-+extern \"C\" {
-+#endif
-+
-+/* External symbol declarations for the compiler. */\
-+"
-+
-+ if test "$dlself" = yes; then
-+ func_verbose "generating symbol list for \`$output'"
-+
-+ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
-+
-+ # Add our own program objects to the symbol list.
-+ progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-+ for progfile in $progfiles; do
-+ func_verbose "extracting global C symbols from \`$progfile'"
-+ $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
-+ done
-+
-+ if test -n "$exclude_expsyms"; then
-+ $opt_dry_run || {
-+ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-+ eval '$MV "$nlist"T "$nlist"'
-+ }
-+ fi
-+
-+ if test -n "$export_symbols_regex"; then
-+ $opt_dry_run || {
-+ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-+ eval '$MV "$nlist"T "$nlist"'
-+ }
-+ fi
-+
-+ # Prepare the list of exported symbols
-+ if test -z "$export_symbols"; then
-+ export_symbols="$output_objdir/$outputname.exp"
-+ $opt_dry_run || {
-+ $RM $export_symbols
-+ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-+ case $host in
-+ *cygwin* | *mingw* | *cegcc* )
-+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-+ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
-+ ;;
-+ esac
-+ }
-+ else
-+ $opt_dry_run || {
-+ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
-+ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
-+ eval '$MV "$nlist"T "$nlist"'
-+ case $host in
-+ *cygwin | *mingw* | *cegcc* )
-+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-+ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
-+ ;;
-+ esac
-+ }
-+ fi
-+ fi
-+
-+ for dlprefile in $dlprefiles; do
-+ func_verbose "extracting global C symbols from \`$dlprefile'"
-+ func_basename "$dlprefile"
-+ name="$func_basename_result"
-+ $opt_dry_run || {
-+ eval '$ECHO ": $name " >> "$nlist"'
-+ eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
-+ }
-+ done
-+
-+ $opt_dry_run || {
-+ # Make sure we have at least an empty file.
-+ test -f "$nlist" || : > "$nlist"
-+
-+ if test -n "$exclude_expsyms"; then
-+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-+ $MV "$nlist"T "$nlist"
-+ fi
-+
-+ # Try sorting and uniquifying the output.
-+ if $GREP -v "^: " < "$nlist" |
-+ if sort -k 3 </dev/null >/dev/null 2>&1; then
-+ sort -k 3
-+ else
-+ sort +2
-+ fi |
-+ uniq > "$nlist"S; then
-+ :
-+ else
-+ $GREP -v "^: " < "$nlist" > "$nlist"S
-+ fi
-+
-+ if test -f "$nlist"S; then
-+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
-+ else
-+ $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
-+ fi
-+
-+ $ECHO >> "$output_objdir/$my_dlsyms" "\
-+
-+/* The mapping between symbol names and symbols. */
-+typedef struct {
-+ const char *name;
-+ void *address;
-+} lt_dlsymlist;
-+"
-+ case $host in
-+ *cygwin* | *mingw* | *cegcc* )
-+ $ECHO >> "$output_objdir/$my_dlsyms" "\
-+/* DATA imports from DLLs on WIN32 con't be const, because
-+ runtime relocations are performed -- see ld's documentation
-+ on pseudo-relocs. */"
-+ lt_dlsym_const= ;;
-+ *osf5*)
-+ echo >> "$output_objdir/$my_dlsyms" "\
-+/* This system does not cope well with relocations in const data */"
-+ lt_dlsym_const= ;;
-+ *)
-+ lt_dlsym_const=const ;;
-+ esac
-+
-+ $ECHO >> "$output_objdir/$my_dlsyms" "\
-+extern $lt_dlsym_const lt_dlsymlist
-+lt_${my_prefix}_LTX_preloaded_symbols[];
-+$lt_dlsym_const lt_dlsymlist
-+lt_${my_prefix}_LTX_preloaded_symbols[] =
-+{\
-+ { \"$my_originator\", (void *) 0 },"
-+
-+ case $need_lib_prefix in
-+ no)
-+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
-+ ;;
-+ *)
-+ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
-+ ;;
-+ esac
-+ $ECHO >> "$output_objdir/$my_dlsyms" "\
-+ {0, (void *) 0}
-+};
-+
-+/* This works around a problem in FreeBSD linker */
-+#ifdef FREEBSD_WORKAROUND
-+static const void *lt_preloaded_setup() {
-+ return lt_${my_prefix}_LTX_preloaded_symbols;
-+}
-+#endif
-+
-+#ifdef __cplusplus
-+}
-+#endif\
-+"
-+ } # !$opt_dry_run
-+
-+ pic_flag_for_symtable=
-+ case "$compile_command " in
-+ *" -static "*) ;;
-+ *)
-+ case $host in
-+ # compiling the symbol table file with pic_flag works around
-+ # a FreeBSD bug that causes programs to crash when -lm is
-+ # linked before any other PIC object. But we must not use
-+ # pic_flag when linking with -static. The problem exists in
-+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-+ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-+ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
-+ *-*-hpux*)
-+ pic_flag_for_symtable=" $pic_flag" ;;
-+ *)
-+ if test "X$my_pic_p" != Xno; then
-+ pic_flag_for_symtable=" $pic_flag"
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ symtab_cflags=
-+ for arg in $LTCFLAGS; do
-+ case $arg in
-+ -pie | -fpie | -fPIE) ;;
-+ *) symtab_cflags="$symtab_cflags $arg" ;;
-+ esac
-+ done
-+
-+ # Now compile the dynamic symbol file.
-+ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
-+
-+ # Clean up the generated files.
-+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
-+
-+ # Transform the symbol file into the correct name.
-+ symfileobj="$output_objdir/${my_outputname}S.$objext"
-+ case $host in
-+ *cygwin* | *mingw* | *cegcc* )
-+ if test -f "$output_objdir/$my_outputname.def"; then
-+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
-+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
-+ else
-+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-+ fi
-+ ;;
-+ *)
-+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-+ ;;
-+ esac
-+ ;;
-+ *)
-+ func_fatal_error "unknown suffix for \`$my_dlsyms'"
-+ ;;
-+ esac
-+ else
-+ # We keep going just in case the user didn't refer to
-+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
-+ # really was required.
-+
-+ # Nullify the symbol file.
-+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
-+ fi
-+}
-+
-+# func_win32_libid arg
-+# return the library type of file 'arg'
-+#
-+# Need a lot of goo to handle *both* DLLs and import libs
-+# Has to be a shell function in order to 'eat' the argument
-+# that is supplied when $file_magic_command is called.
-+func_win32_libid ()
-+{
-+ $opt_debug
-+ win32_libid_type="unknown"
-+ win32_fileres=`file -L $1 2>/dev/null`
-+ case $win32_fileres in
-+ *ar\ archive\ import\ library*) # definitely import
-+ win32_libid_type="x86 archive import"
-+ ;;
-+ *ar\ archive*) # could be an import, or static
-+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
-+ $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
-+ win32_nmres=`eval $NM -f posix -A $1 |
-+ $SED -n -e '
-+ 1,100{
-+ / I /{
-+ s,.*,import,
-+ p
-+ q
-+ }
-+ }'`
-+ case $win32_nmres in
-+ import*) win32_libid_type="x86 archive import";;
-+ *) win32_libid_type="x86 archive static";;
-+ esac
-+ fi
-+ ;;
-+ *DLL*)
-+ win32_libid_type="x86 DLL"
-+ ;;
-+ *executable*) # but shell scripts are "executable" too...
-+ case $win32_fileres in
-+ *MS\ Windows\ PE\ Intel*)
-+ win32_libid_type="x86 DLL"
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ $ECHO "$win32_libid_type"
-+}
-+
-+
-+
-+# func_extract_an_archive dir oldlib
-+func_extract_an_archive ()
-+{
-+ $opt_debug
-+ f_ex_an_ar_dir="$1"; shift
-+ f_ex_an_ar_oldlib="$1"
-+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
-+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
-+ :
-+ else
-+ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
-+ fi
-+}
-+
-+
-+# func_extract_archives gentop oldlib ...
-+func_extract_archives ()
-+{
-+ $opt_debug
-+ my_gentop="$1"; shift
-+ my_oldlibs=${1+"$@"}
-+ my_oldobjs=""
-+ my_xlib=""
-+ my_xabs=""
-+ my_xdir=""
-+
-+ for my_xlib in $my_oldlibs; do
-+ # Extract the objects.
-+ case $my_xlib in
-+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
-+ *) my_xabs=`pwd`"/$my_xlib" ;;
-+ esac
-+ func_basename "$my_xlib"
-+ my_xlib="$func_basename_result"
-+ my_xlib_u=$my_xlib
-+ while :; do
-+ case " $extracted_archives " in
-+ *" $my_xlib_u "*)
-+ func_arith $extracted_serial + 1
-+ extracted_serial=$func_arith_result
-+ my_xlib_u=lt$extracted_serial-$my_xlib ;;
-+ *) break ;;
-+ esac
-+ done
-+ extracted_archives="$extracted_archives $my_xlib_u"
-+ my_xdir="$my_gentop/$my_xlib_u"
-+
-+ func_mkdir_p "$my_xdir"
-+
-+ case $host in
-+ *-darwin*)
-+ func_verbose "Extracting $my_xabs"
-+ # Do not bother doing anything if just a dry run
-+ $opt_dry_run || {
-+ darwin_orig_dir=`pwd`
-+ cd $my_xdir || exit $?
-+ darwin_archive=$my_xabs
-+ darwin_curdir=`pwd`
-+ darwin_base_archive=`basename "$darwin_archive"`
-+ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
-+ if test -n "$darwin_arches"; then
-+ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
-+ darwin_arch=
-+ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
-+ for darwin_arch in $darwin_arches ; do
-+ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-+ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
-+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
-+ cd "$darwin_curdir"
-+ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
-+ done # $darwin_arches
-+ ## Okay now we've a bunch of thin objects, gotta fatten them up :)
-+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
-+ darwin_file=
-+ darwin_files=
-+ for darwin_file in $darwin_filelist; do
-+ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
-+ $LIPO -create -output "$darwin_file" $darwin_files
-+ done # $darwin_filelist
-+ $RM -rf unfat-$$
-+ cd "$darwin_orig_dir"
-+ else
-+ cd $darwin_orig_dir
-+ func_extract_an_archive "$my_xdir" "$my_xabs"
-+ fi # $darwin_arches
-+ } # !$opt_dry_run
-+ ;;
-+ *)
-+ func_extract_an_archive "$my_xdir" "$my_xabs"
-+ ;;
-+ esac
-+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-+ done
-+
-+ func_extract_archives_result="$my_oldobjs"
-+}
-+
-+
-+
-+# func_emit_wrapper_part1 [arg=no]
-+#
-+# Emit the first part of a libtool wrapper script on stdout.
-+# For more information, see the description associated with
-+# func_emit_wrapper(), below.
-+func_emit_wrapper_part1 ()
-+{
-+ func_emit_wrapper_part1_arg1=no
-+ if test -n "$1" ; then
-+ func_emit_wrapper_part1_arg1=$1
-+ fi
-+
-+ $ECHO "\
-+#! $SHELL
-+
-+# $output - temporary wrapper script for $objdir/$outputname
-+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-+#
-+# The $output program cannot be directly executed until all the libtool
-+# libraries that it depends on are installed.
-+#
-+# This wrapper script should never be moved out of the build directory.
-+# If it is, it will not operate correctly.
-+
-+# Sed substitution that helps us do robust quoting. It backslashifies
-+# metacharacters that are still active within double-quoted strings.
-+Xsed='${SED} -e 1s/^X//'
-+sed_quote_subst='$sed_quote_subst'
-+
-+# Be Bourne compatible
-+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
-+ setopt NO_GLOB_SUBST
-+else
-+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
-+fi
-+BIN_SH=xpg4; export BIN_SH # for Tru64
-+DUALCASE=1; export DUALCASE # for MKS sh
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-+
-+relink_command=\"$relink_command\"
-+
-+# This environment variable determines our operation mode.
-+if test \"\$libtool_install_magic\" = \"$magic\"; then
-+ # install mode needs the following variables:
-+ generated_by_libtool_version='$macro_version'
-+ notinst_deplibs='$notinst_deplibs'
-+else
-+ # When we are sourced in execute mode, \$file and \$ECHO are already set.
-+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
-+ ECHO=\"$qecho\"
-+ file=\"\$0\"
-+ # Make sure echo works.
-+ if test \"X\$1\" = X--no-reexec; then
-+ # Discard the --no-reexec flag, and continue.
-+ shift
-+ elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
-+ # Yippee, \$ECHO works!
-+ :
-+ else
-+ # Restart under the correct shell, and then maybe \$ECHO will work.
-+ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-+ fi
-+ fi\
-+"
-+ $ECHO "\
-+
-+ # Find the directory that this script lives in.
-+ thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
-+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-+
-+ # Follow symbolic links until we get to the real thisdir.
-+ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
-+ while test -n \"\$file\"; do
-+ destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-+
-+ # If there was a directory component, then change thisdir.
-+ if test \"x\$destdir\" != \"x\$file\"; then
-+ case \"\$destdir\" in
-+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
-+ *) thisdir=\"\$thisdir/\$destdir\" ;;
-+ esac
-+ fi
-+
-+ file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-+ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
-+ done
-+"
-+}
-+# end: func_emit_wrapper_part1
-+
-+# func_emit_wrapper_part2 [arg=no]
-+#
-+# Emit the second part of a libtool wrapper script on stdout.
-+# For more information, see the description associated with
-+# func_emit_wrapper(), below.
-+func_emit_wrapper_part2 ()
-+{
-+ func_emit_wrapper_part2_arg1=no
-+ if test -n "$1" ; then
-+ func_emit_wrapper_part2_arg1=$1
-+ fi
-+
-+ $ECHO "\
-+
-+ # Usually 'no', except on cygwin/mingw when embedded into
-+ # the cwrapper.
-+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
-+ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
-+ # special case for '.'
-+ if test \"\$thisdir\" = \".\"; then
-+ thisdir=\`pwd\`
-+ fi
-+ # remove .libs from thisdir
-+ case \"\$thisdir\" in
-+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
-+ $objdir ) thisdir=. ;;
-+ esac
-+ fi
-+
-+ # Try to get the absolute directory name.
-+ absdir=\`cd \"\$thisdir\" && pwd\`
-+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
-+"
-+
-+ if test "$fast_install" = yes; then
-+ $ECHO "\
-+ program=lt-'$outputname'$exeext
-+ progdir=\"\$thisdir/$objdir\"
-+
-+ if test ! -f \"\$progdir/\$program\" ||
-+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
-+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-+
-+ file=\"\$\$-\$program\"
-+
-+ if test ! -d \"\$progdir\"; then
-+ $MKDIR \"\$progdir\"
-+ else
-+ $RM \"\$progdir/\$file\"
-+ fi"
-+
-+ $ECHO "\
-+
-+ # relink executable if necessary
-+ if test -n \"\$relink_command\"; then
-+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
-+ else
-+ $ECHO \"\$relink_command_output\" >&2
-+ $RM \"\$progdir/\$file\"
-+ exit 1
-+ fi
-+ fi
-+
-+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-+ { $RM \"\$progdir/\$program\";
-+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-+ $RM \"\$progdir/\$file\"
-+ fi"
-+ else
-+ $ECHO "\
-+ program='$outputname'
-+ progdir=\"\$thisdir/$objdir\"
-+"
-+ fi
-+
-+ $ECHO "\
-+
-+ if test -f \"\$progdir/\$program\"; then"
-+
-+ # Export our shlibpath_var if we have one.
-+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-+ $ECHO "\
-+ # Add our own library path to $shlibpath_var
-+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-+
-+ # Some systems cannot cope with colon-terminated $shlibpath_var
-+ # The second colon is a workaround for a bug in BeOS R4 sed
-+ $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-+
-+ export $shlibpath_var
-+"
-+ fi
-+
-+ # fixup the dll searchpath if we need to.
-+ if test -n "$dllsearchpath"; then
-+ $ECHO "\
-+ # Add the dll search path components to the executable PATH
-+ PATH=$dllsearchpath:\$PATH
-+"
-+ fi
-+
-+ $ECHO "\
-+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
-+ # Run the actual program with our arguments.
-+"
-+ case $host in
-+ # Backslashes separate directories on plain windows
-+ *-*-mingw | *-*-os2* | *-cegcc*)
-+ $ECHO "\
-+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-+"
-+ ;;
-+
-+ *)
-+ $ECHO "\
-+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
-+"
-+ ;;
-+ esac
-+ $ECHO "\
-+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
-+ exit 1
-+ fi
-+ else
-+ # The program doesn't exist.
-+ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
-+ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
-+ $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
-+ exit 1
-+ fi
-+fi\
-+"
-+}
-+# end: func_emit_wrapper_part2
-+
-+
-+# func_emit_wrapper [arg=no]
-+#
-+# Emit a libtool wrapper script on stdout.
-+# Don't directly open a file because we may want to
-+# incorporate the script contents within a cygwin/mingw
-+# wrapper executable. Must ONLY be called from within
-+# func_mode_link because it depends on a number of variables
-+# set therein.
-+#
-+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-+# variable will take. If 'yes', then the emitted script
-+# will assume that the directory in which it is stored is
-+# the $objdir directory. This is a cygwin/mingw-specific
-+# behavior.
-+func_emit_wrapper ()
-+{
-+ func_emit_wrapper_arg1=no
-+ if test -n "$1" ; then
-+ func_emit_wrapper_arg1=$1
-+ fi
-+
-+ # split this up so that func_emit_cwrapperexe_src
-+ # can call each part independently.
-+ func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
-+ func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
-+}
-+
-+
-+# func_to_host_path arg
-+#
-+# Convert paths to host format when used with build tools.
-+# Intended for use with "native" mingw (where libtool itself
-+# is running under the msys shell), or in the following cross-
-+# build environments:
-+# $build $host
-+# mingw (msys) mingw [e.g. native]
-+# cygwin mingw
-+# *nix + wine mingw
-+# where wine is equipped with the `winepath' executable.
-+# In the native mingw case, the (msys) shell automatically
-+# converts paths for any non-msys applications it launches,
-+# but that facility isn't available from inside the cwrapper.
-+# Similar accommodations are necessary for $host mingw and
-+# $build cygwin. Calling this function does no harm for other
-+# $host/$build combinations not listed above.
-+#
-+# ARG is the path (on $build) that should be converted to
-+# the proper representation for $host. The result is stored
-+# in $func_to_host_path_result.
-+func_to_host_path ()
-+{
-+ func_to_host_path_result="$1"
-+ if test -n "$1" ; then
-+ case $host in
-+ *mingw* )
-+ lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-+ case $build in
-+ *mingw* ) # actually, msys
-+ # awkward: cmd appends spaces to result
-+ lt_sed_strip_trailing_spaces="s/[ ]*\$//"
-+ func_to_host_path_tmp1=`( cmd //c echo "$1" |\
-+ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
-+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
-+ $SED -e "$lt_sed_naive_backslashify"`
-+ ;;
-+ *cygwin* )
-+ func_to_host_path_tmp1=`cygpath -w "$1"`
-+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
-+ $SED -e "$lt_sed_naive_backslashify"`
-+ ;;
-+ * )
-+ # Unfortunately, winepath does not exit with a non-zero
-+ # error code, so we are forced to check the contents of
-+ # stdout. On the other hand, if the command is not
-+ # found, the shell will set an exit code of 127 and print
-+ # *an error message* to stdout. So we must check for both
-+ # error code of zero AND non-empty stdout, which explains
-+ # the odd construction:
-+ func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
-+ if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
-+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
-+ $SED -e "$lt_sed_naive_backslashify"`
-+ else
-+ # Allow warning below.
-+ func_to_host_path_result=""
-+ fi
-+ ;;
-+ esac
-+ if test -z "$func_to_host_path_result" ; then
-+ func_error "Could not determine host path corresponding to"
-+ func_error " '$1'"
-+ func_error "Continuing, but uninstalled executables may not work."
-+ # Fallback:
-+ func_to_host_path_result="$1"
-+ fi
-+ ;;
-+ esac
-+ fi
-+}
-+# end: func_to_host_path
-+
-+# func_to_host_pathlist arg
-+#
-+# Convert pathlists to host format when used with build tools.
-+# See func_to_host_path(), above. This function supports the
-+# following $build/$host combinations (but does no harm for
-+# combinations not listed here):
-+# $build $host
-+# mingw (msys) mingw [e.g. native]
-+# cygwin mingw
-+# *nix + wine mingw
-+#
-+# Path separators are also converted from $build format to
-+# $host format. If ARG begins or ends with a path separator
-+# character, it is preserved (but converted to $host format)
-+# on output.
-+#
-+# ARG is a pathlist (on $build) that should be converted to
-+# the proper representation on $host. The result is stored
-+# in $func_to_host_pathlist_result.
-+func_to_host_pathlist ()
-+{
-+ func_to_host_pathlist_result="$1"
-+ if test -n "$1" ; then
-+ case $host in
-+ *mingw* )
-+ lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-+ # Remove leading and trailing path separator characters from
-+ # ARG. msys behavior is inconsistent here, cygpath turns them
-+ # into '.;' and ';.', and winepath ignores them completely.
-+ func_to_host_pathlist_tmp2="$1"
-+ # Once set for this call, this variable should not be
-+ # reassigned. It is used in tha fallback case.
-+ func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
-+ $SED -e 's|^:*||' -e 's|:*$||'`
-+ case $build in
-+ *mingw* ) # Actually, msys.
-+ # Awkward: cmd appends spaces to result.
-+ lt_sed_strip_trailing_spaces="s/[ ]*\$//"
-+ func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
-+ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
-+ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
-+ $SED -e "$lt_sed_naive_backslashify"`
-+ ;;
-+ *cygwin* )
-+ func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
-+ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
-+ $SED -e "$lt_sed_naive_backslashify"`
-+ ;;
-+ * )
-+ # unfortunately, winepath doesn't convert pathlists
-+ func_to_host_pathlist_result=""
-+ func_to_host_pathlist_oldIFS=$IFS
-+ IFS=:
-+ for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
-+ IFS=$func_to_host_pathlist_oldIFS
-+ if test -n "$func_to_host_pathlist_f" ; then
-+ func_to_host_path "$func_to_host_pathlist_f"
-+ if test -n "$func_to_host_path_result" ; then
-+ if test -z "$func_to_host_pathlist_result" ; then
-+ func_to_host_pathlist_result="$func_to_host_path_result"
-+ else
-+ func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
-+ fi
-+ fi
-+ fi
-+ IFS=:
-+ done
-+ IFS=$func_to_host_pathlist_oldIFS
-+ ;;
-+ esac
-+ if test -z "$func_to_host_pathlist_result" ; then
-+ func_error "Could not determine the host path(s) corresponding to"
-+ func_error " '$1'"
-+ func_error "Continuing, but uninstalled executables may not work."
-+ # Fallback. This may break if $1 contains DOS-style drive
-+ # specifications. The fix is not to complicate the expression
-+ # below, but for the user to provide a working wine installation
-+ # with winepath so that path translation in the cross-to-mingw
-+ # case works properly.
-+ lt_replace_pathsep_nix_to_dos="s|:|;|g"
-+ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
-+ $SED -e "$lt_replace_pathsep_nix_to_dos"`
-+ fi
-+ # Now, add the leading and trailing path separators back
-+ case "$1" in
-+ :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
-+ ;;
-+ esac
-+ case "$1" in
-+ *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ fi
-+}
-+# end: func_to_host_pathlist
-+
-+# func_emit_cwrapperexe_src
-+# emit the source code for a wrapper executable on stdout
-+# Must ONLY be called from within func_mode_link because
-+# it depends on a number of variable set therein.
-+func_emit_cwrapperexe_src ()
-+{
-+ cat <<EOF
-+
-+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
-+ Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-+
-+ The $output program cannot be directly executed until all the libtool
-+ libraries that it depends on are installed.
-+
-+ This wrapper executable should never be moved out of the build directory.
-+ If it is, it will not operate correctly.
-+
-+ Currently, it simply execs the wrapper *script* "$SHELL $output",
-+ but could eventually absorb all of the scripts functionality and
-+ exec $objdir/$outputname directly.
-+*/
-+EOF
-+ cat <<"EOF"
-+#include <stdio.h>
-+#include <stdlib.h>
-+#ifdef _MSC_VER
-+# include <direct.h>
-+# include <process.h>
-+# include <io.h>
-+# define setmode _setmode
-+#else
-+# include <unistd.h>
-+# include <stdint.h>
-+# ifdef __CYGWIN__
-+# include <io.h>
-+# define HAVE_SETENV
-+# ifdef __STRICT_ANSI__
-+char *realpath (const char *, char *);
-+int putenv (char *);
-+int setenv (const char *, const char *, int);
-+# endif
-+# endif
-+#endif
-+#include <malloc.h>
-+#include <stdarg.h>
-+#include <assert.h>
-+#include <string.h>
-+#include <ctype.h>
-+#include <errno.h>
-+#include <fcntl.h>
-+#include <sys/stat.h>
-+
-+#if defined(PATH_MAX)
-+# define LT_PATHMAX PATH_MAX
-+#elif defined(MAXPATHLEN)
-+# define LT_PATHMAX MAXPATHLEN
-+#else
-+# define LT_PATHMAX 1024
-+#endif
-+
-+#ifndef S_IXOTH
-+# define S_IXOTH 0
-+#endif
-+#ifndef S_IXGRP
-+# define S_IXGRP 0
-+#endif
-+
-+#ifdef _MSC_VER
-+# define S_IXUSR _S_IEXEC
-+# define stat _stat
-+# ifndef _INTPTR_T_DEFINED
-+# define intptr_t int
-+# endif
-+#endif
-+
-+#ifndef DIR_SEPARATOR
-+# define DIR_SEPARATOR '/'
-+# define PATH_SEPARATOR ':'
-+#endif
-+
-+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
-+ defined (__OS2__)
-+# define HAVE_DOS_BASED_FILE_SYSTEM
-+# define FOPEN_WB "wb"
-+# ifndef DIR_SEPARATOR_2
-+# define DIR_SEPARATOR_2 '\\'
-+# endif
-+# ifndef PATH_SEPARATOR_2
-+# define PATH_SEPARATOR_2 ';'
-+# endif
-+#endif
-+
-+#ifndef DIR_SEPARATOR_2
-+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-+#else /* DIR_SEPARATOR_2 */
-+# define IS_DIR_SEPARATOR(ch) \
-+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-+#endif /* DIR_SEPARATOR_2 */
-+
-+#ifndef PATH_SEPARATOR_2
-+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-+#else /* PATH_SEPARATOR_2 */
-+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-+#endif /* PATH_SEPARATOR_2 */
-+
-+#ifdef __CYGWIN__
-+# define FOPEN_WB "wb"
-+#endif
-+
-+#ifndef FOPEN_WB
-+# define FOPEN_WB "w"
-+#endif
-+#ifndef _O_BINARY
-+# define _O_BINARY 0
-+#endif
-+
-+#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
-+#define XFREE(stale) do { \
-+ if (stale) { free ((void *) stale); stale = 0; } \
-+} while (0)
-+
-+#undef LTWRAPPER_DEBUGPRINTF
-+#if defined DEBUGWRAPPER
-+# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
-+static void
-+ltwrapper_debugprintf (const char *fmt, ...)
-+{
-+ va_list args;
-+ va_start (args, fmt);
-+ (void) vfprintf (stderr, fmt, args);
-+ va_end (args);
-+}
-+#else
-+# define LTWRAPPER_DEBUGPRINTF(args)
-+#endif
-+
-+const char *program_name = NULL;
-+
-+void *xmalloc (size_t num);
-+char *xstrdup (const char *string);
-+const char *base_name (const char *name);
-+char *find_executable (const char *wrapper);
-+char *chase_symlinks (const char *pathspec);
-+int make_executable (const char *path);
-+int check_executable (const char *path);
-+char *strendzap (char *str, const char *pat);
-+void lt_fatal (const char *message, ...);
-+void lt_setenv (const char *name, const char *value);
-+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
-+void lt_opt_process_env_set (const char *arg);
-+void lt_opt_process_env_prepend (const char *arg);
-+void lt_opt_process_env_append (const char *arg);
-+int lt_split_name_value (const char *arg, char** name, char** value);
-+void lt_update_exe_path (const char *name, const char *value);
-+void lt_update_lib_path (const char *name, const char *value);
-+
-+static const char *script_text_part1 =
-+EOF
-+
-+ func_emit_wrapper_part1 yes |
-+ $SED -e 's/\([\\"]\)/\\\1/g' \
-+ -e 's/^/ "/' -e 's/$/\\n"/'
-+ echo ";"
-+ cat <<EOF
-+
-+static const char *script_text_part2 =
-+EOF
-+ func_emit_wrapper_part2 yes |
-+ $SED -e 's/\([\\"]\)/\\\1/g' \
-+ -e 's/^/ "/' -e 's/$/\\n"/'
-+ echo ";"
-+
-+ cat <<EOF
-+const char * MAGIC_EXE = "$magic_exe";
-+const char * LIB_PATH_VARNAME = "$shlibpath_var";
-+EOF
-+
-+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-+ func_to_host_pathlist "$temp_rpath"
-+ cat <<EOF
-+const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result";
-+EOF
-+ else
-+ cat <<"EOF"
-+const char * LIB_PATH_VALUE = "";
-+EOF
-+ fi
-+
-+ if test -n "$dllsearchpath"; then
-+ func_to_host_pathlist "$dllsearchpath:"
-+ cat <<EOF
-+const char * EXE_PATH_VARNAME = "PATH";
-+const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result";
-+EOF
-+ else
-+ cat <<"EOF"
-+const char * EXE_PATH_VARNAME = "";
-+const char * EXE_PATH_VALUE = "";
-+EOF
-+ fi
-+
-+ if test "$fast_install" = yes; then
-+ cat <<EOF
-+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
-+EOF
-+ else
-+ cat <<EOF
-+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
-+EOF
-+ fi
-+
-+
-+ cat <<"EOF"
-+
-+#define LTWRAPPER_OPTION_PREFIX "--lt-"
-+#define LTWRAPPER_OPTION_PREFIX_LENGTH 5
-+
-+static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH;
-+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
-+
-+static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
-+
-+static const size_t env_set_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
-+static const char *env_set_opt = LTWRAPPER_OPTION_PREFIX "env-set";
-+ /* argument is putenv-style "foo=bar", value of foo is set to bar */
-+
-+static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
-+static const char *env_prepend_opt = LTWRAPPER_OPTION_PREFIX "env-prepend";
-+ /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
-+
-+static const size_t env_append_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
-+static const char *env_append_opt = LTWRAPPER_OPTION_PREFIX "env-append";
-+ /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
-+
-+int
-+main (int argc, char *argv[])
-+{
-+ char **newargz;
-+ int newargc;
-+ char *tmp_pathspec;
-+ char *actual_cwrapper_path;
-+ char *actual_cwrapper_name;
-+ char *target_name;
-+ char *lt_argv_zero;
-+ intptr_t rval = 127;
-+
-+ int i;
-+
-+ program_name = (char *) xstrdup (base_name (argv[0]));
-+ LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0]));
-+ LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
-+
-+ /* very simple arg parsing; don't want to rely on getopt */
-+ for (i = 1; i < argc; i++)
-+ {
-+ if (strcmp (argv[i], dumpscript_opt) == 0)
-+ {
-+EOF
-+ case "$host" in
-+ *mingw* | *cygwin* )
-+ # make stdout use "unix" line endings
-+ echo " setmode(1,_O_BINARY);"
-+ ;;
-+ esac
-+
-+ cat <<"EOF"
-+ printf ("%s", script_text_part1);
-+ printf ("%s", script_text_part2);
-+ return 0;
-+ }
-+ }
-+
-+ newargz = XMALLOC (char *, argc + 1);
-+ tmp_pathspec = find_executable (argv[0]);
-+ if (tmp_pathspec == NULL)
-+ lt_fatal ("Couldn't find %s", argv[0]);
-+ LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
-+ tmp_pathspec));
-+
-+ actual_cwrapper_path = chase_symlinks (tmp_pathspec);
-+ LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
-+ actual_cwrapper_path));
-+ XFREE (tmp_pathspec);
-+
-+ actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
-+ strendzap (actual_cwrapper_path, actual_cwrapper_name);
-+
-+ /* wrapper name transforms */
-+ strendzap (actual_cwrapper_name, ".exe");
-+ tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
-+ XFREE (actual_cwrapper_name);
-+ actual_cwrapper_name = tmp_pathspec;
-+ tmp_pathspec = 0;
-+
-+ /* target_name transforms -- use actual target program name; might have lt- prefix */
-+ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
-+ strendzap (target_name, ".exe");
-+ tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
-+ XFREE (target_name);
-+ target_name = tmp_pathspec;
-+ tmp_pathspec = 0;
-+
-+ LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
-+ target_name));
-+EOF
-+
-+ cat <<EOF
-+ newargz[0] =
-+ XMALLOC (char, (strlen (actual_cwrapper_path) +
-+ strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
-+ strcpy (newargz[0], actual_cwrapper_path);
-+ strcat (newargz[0], "$objdir");
-+ strcat (newargz[0], "/");
-+EOF
-+
-+ cat <<"EOF"
-+ /* stop here, and copy so we don't have to do this twice */
-+ tmp_pathspec = xstrdup (newargz[0]);
-+
-+ /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
-+ strcat (newargz[0], actual_cwrapper_name);
-+
-+ /* DO want the lt- prefix here if it exists, so use target_name */
-+ lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
-+ XFREE (tmp_pathspec);
-+ tmp_pathspec = NULL;
-+EOF
-+
-+ case $host_os in
-+ mingw*)
-+ cat <<"EOF"
-+ {
-+ char* p;
-+ while ((p = strchr (newargz[0], '\\')) != NULL)
-+ {
-+ *p = '/';
-+ }
-+ while ((p = strchr (lt_argv_zero, '\\')) != NULL)
-+ {
-+ *p = '/';
-+ }
-+ }
-+EOF
-+ ;;
-+ esac
-+
-+ cat <<"EOF"
-+ XFREE (target_name);
-+ XFREE (actual_cwrapper_path);
-+ XFREE (actual_cwrapper_name);
-+
-+ lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
-+ lt_setenv ("DUALCASE", "1"); /* for MSK sh */
-+ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
-+ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
-+
-+ newargc=0;
-+ for (i = 1; i < argc; i++)
-+ {
-+ if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
-+ {
-+ if (argv[i][env_set_opt_len] == '=')
-+ {
-+ const char *p = argv[i] + env_set_opt_len + 1;
-+ lt_opt_process_env_set (p);
-+ }
-+ else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
-+ {
-+ lt_opt_process_env_set (argv[++i]); /* don't copy */
-+ }
-+ else
-+ lt_fatal ("%s missing required argument", env_set_opt);
-+ continue;
-+ }
-+ if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
-+ {
-+ if (argv[i][env_prepend_opt_len] == '=')
-+ {
-+ const char *p = argv[i] + env_prepend_opt_len + 1;
-+ lt_opt_process_env_prepend (p);
-+ }
-+ else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
-+ {
-+ lt_opt_process_env_prepend (argv[++i]); /* don't copy */
-+ }
-+ else
-+ lt_fatal ("%s missing required argument", env_prepend_opt);
-+ continue;
-+ }
-+ if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
-+ {
-+ if (argv[i][env_append_opt_len] == '=')
-+ {
-+ const char *p = argv[i] + env_append_opt_len + 1;
-+ lt_opt_process_env_append (p);
-+ }
-+ else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
-+ {
-+ lt_opt_process_env_append (argv[++i]); /* don't copy */
-+ }
-+ else
-+ lt_fatal ("%s missing required argument", env_append_opt);
-+ continue;
-+ }
-+ if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
-+ {
-+ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
-+ namespace, but it is not one of the ones we know about and
-+ have already dealt with, above (inluding dump-script), then
-+ report an error. Otherwise, targets might begin to believe
-+ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
-+ namespace. The first time any user complains about this, we'll
-+ need to make LTWRAPPER_OPTION_PREFIX a configure-time option
-+ or a configure.ac-settable value.
-+ */
-+ lt_fatal ("Unrecognized option in %s namespace: '%s'",
-+ ltwrapper_option_prefix, argv[i]);
-+ }
-+ /* otherwise ... */
-+ newargz[++newargc] = xstrdup (argv[i]);
-+ }
-+ newargz[++newargc] = NULL;
-+
-+ LTWRAPPER_DEBUGPRINTF (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
-+ for (i = 0; i < newargc; i++)
-+ {
-+ LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
-+ }
-+
-+EOF
-+
-+ case $host_os in
-+ mingw*)
-+ cat <<"EOF"
-+ /* execv doesn't actually work on mingw as expected on unix */
-+ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
-+ if (rval == -1)
-+ {
-+ /* failed to start process */
-+ LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
-+ return 127;
-+ }
-+ return rval;
-+EOF
-+ ;;
-+ *)
-+ cat <<"EOF"
-+ execv (lt_argv_zero, newargz);
-+ return rval; /* =127, but avoids unused variable warning */
-+EOF
-+ ;;
-+ esac
-+
-+ cat <<"EOF"
-+}
-+
-+void *
-+xmalloc (size_t num)
-+{
-+ void *p = (void *) malloc (num);
-+ if (!p)
-+ lt_fatal ("Memory exhausted");
-+
-+ return p;
-+}
-+
-+char *
-+xstrdup (const char *string)
-+{
-+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
-+ string) : NULL;
-+}
-+
-+const char *
-+base_name (const char *name)
-+{
-+ const char *base;
-+
-+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-+ /* Skip over the disk name in MSDOS pathnames. */
-+ if (isalpha ((unsigned char) name[0]) && name[1] == ':')
-+ name += 2;
-+#endif
-+
-+ for (base = name; *name; name++)
-+ if (IS_DIR_SEPARATOR (*name))
-+ base = name + 1;
-+ return base;
-+}
-+
-+int
-+check_executable (const char *path)
-+{
-+ struct stat st;
-+
-+ LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n",
-+ path ? (*path ? path : "EMPTY!") : "NULL!"));
-+ if ((!path) || (!*path))
-+ return 0;
-+
-+ if ((stat (path, &st) >= 0)
-+ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
-+ return 1;
-+ else
-+ return 0;
-+}
-+
-+int
-+make_executable (const char *path)
-+{
-+ int rval = 0;
-+ struct stat st;
-+
-+ LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n",
-+ path ? (*path ? path : "EMPTY!") : "NULL!"));
-+ if ((!path) || (!*path))
-+ return 0;
-+
-+ if (stat (path, &st) >= 0)
-+ {
-+ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
-+ }
-+ return rval;
-+}
-+
-+/* Searches for the full path of the wrapper. Returns
-+ newly allocated full path name if found, NULL otherwise
-+ Does not chase symlinks, even on platforms that support them.
-+*/
-+char *
-+find_executable (const char *wrapper)
-+{
-+ int has_slash = 0;
-+ const char *p;
-+ const char *p_next;
-+ /* static buffer for getcwd */
-+ char tmp[LT_PATHMAX + 1];
-+ int tmp_len;
-+ char *concat_name;
-+
-+ LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n",
-+ wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
-+
-+ if ((wrapper == NULL) || (*wrapper == '\0'))
-+ return NULL;
-+
-+ /* Absolute path? */
-+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-+ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
-+ {
-+ concat_name = xstrdup (wrapper);
-+ if (check_executable (concat_name))
-+ return concat_name;
-+ XFREE (concat_name);
-+ }
-+ else
-+ {
-+#endif
-+ if (IS_DIR_SEPARATOR (wrapper[0]))
-+ {
-+ concat_name = xstrdup (wrapper);
-+ if (check_executable (concat_name))
-+ return concat_name;
-+ XFREE (concat_name);
-+ }
-+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-+ }
-+#endif
-+
-+ for (p = wrapper; *p; p++)
-+ if (*p == '/')
-+ {
-+ has_slash = 1;
-+ break;
-+ }
-+ if (!has_slash)
-+ {
-+ /* no slashes; search PATH */
-+ const char *path = getenv ("PATH");
-+ if (path != NULL)
-+ {
-+ for (p = path; *p; p = p_next)
-+ {
-+ const char *q;
-+ size_t p_len;
-+ for (q = p; *q; q++)
-+ if (IS_PATH_SEPARATOR (*q))
-+ break;
-+ p_len = q - p;
-+ p_next = (*q == '\0' ? q : q + 1);
-+ if (p_len == 0)
-+ {
-+ /* empty path: current directory */
-+ if (getcwd (tmp, LT_PATHMAX) == NULL)
-+ lt_fatal ("getcwd failed");
-+ tmp_len = strlen (tmp);
-+ concat_name =
-+ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
-+ memcpy (concat_name, tmp, tmp_len);
-+ concat_name[tmp_len] = '/';
-+ strcpy (concat_name + tmp_len + 1, wrapper);
-+ }
-+ else
-+ {
-+ concat_name =
-+ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
-+ memcpy (concat_name, p, p_len);
-+ concat_name[p_len] = '/';
-+ strcpy (concat_name + p_len + 1, wrapper);
-+ }
-+ if (check_executable (concat_name))
-+ return concat_name;
-+ XFREE (concat_name);
-+ }
-+ }
-+ /* not found in PATH; assume curdir */
-+ }
-+ /* Relative path | not found in path: prepend cwd */
-+ if (getcwd (tmp, LT_PATHMAX) == NULL)
-+ lt_fatal ("getcwd failed");
-+ tmp_len = strlen (tmp);
-+ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
-+ memcpy (concat_name, tmp, tmp_len);
-+ concat_name[tmp_len] = '/';
-+ strcpy (concat_name + tmp_len + 1, wrapper);
-+
-+ if (check_executable (concat_name))
-+ return concat_name;
-+ XFREE (concat_name);
-+ return NULL;
-+}
-+
-+char *
-+chase_symlinks (const char *pathspec)
-+{
-+#ifndef S_ISLNK
-+ return xstrdup (pathspec);
-+#else
-+ char buf[LT_PATHMAX];
-+ struct stat s;
-+ char *tmp_pathspec = xstrdup (pathspec);
-+ char *p;
-+ int has_symlinks = 0;
-+ while (strlen (tmp_pathspec) && !has_symlinks)
-+ {
-+ LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
-+ tmp_pathspec));
-+ if (lstat (tmp_pathspec, &s) == 0)
-+ {
-+ if (S_ISLNK (s.st_mode) != 0)
-+ {
-+ has_symlinks = 1;
-+ break;
-+ }
-+
-+ /* search backwards for last DIR_SEPARATOR */
-+ p = tmp_pathspec + strlen (tmp_pathspec) - 1;
-+ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
-+ p--;
-+ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
-+ {
-+ /* no more DIR_SEPARATORS left */
-+ break;
-+ }
-+ *p = '\0';
-+ }
-+ else
-+ {
-+ char *errstr = strerror (errno);
-+ lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
-+ }
-+ }
-+ XFREE (tmp_pathspec);
-+
-+ if (!has_symlinks)
-+ {
-+ return xstrdup (pathspec);
-+ }
-+
-+ tmp_pathspec = realpath (pathspec, buf);
-+ if (tmp_pathspec == 0)
-+ {
-+ lt_fatal ("Could not follow symlinks for %s", pathspec);
-+ }
-+ return xstrdup (tmp_pathspec);
-+#endif
-+}
-+
-+char *
-+strendzap (char *str, const char *pat)
-+{
-+ size_t len, patlen;
-+
-+ assert (str != NULL);
-+ assert (pat != NULL);
-+
-+ len = strlen (str);
-+ patlen = strlen (pat);
-+
-+ if (patlen <= len)
-+ {
-+ str += len - patlen;
-+ if (strcmp (str, pat) == 0)
-+ *str = '\0';
-+ }
-+ return str;
-+}
-+
-+static void
-+lt_error_core (int exit_status, const char *mode,
-+ const char *message, va_list ap)
-+{
-+ fprintf (stderr, "%s: %s: ", program_name, mode);
-+ vfprintf (stderr, message, ap);
-+ fprintf (stderr, ".\n");
-+
-+ if (exit_status >= 0)
-+ exit (exit_status);
-+}
-+
-+void
-+lt_fatal (const char *message, ...)
-+{
-+ va_list ap;
-+ va_start (ap, message);
-+ lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
-+ va_end (ap);
-+}
-+
-+void
-+lt_setenv (const char *name, const char *value)
-+{
-+ LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
-+ (name ? name : "<NULL>"),
-+ (value ? value : "<NULL>")));
-+ {
-+#ifdef HAVE_SETENV
-+ /* always make a copy, for consistency with !HAVE_SETENV */
-+ char *str = xstrdup (value);
-+ setenv (name, str, 1);
-+#else
-+ int len = strlen (name) + 1 + strlen (value) + 1;
-+ char *str = XMALLOC (char, len);
-+ sprintf (str, "%s=%s", name, value);
-+ if (putenv (str) != EXIT_SUCCESS)
-+ {
-+ XFREE (str);
-+ }
-+#endif
-+ }
-+}
-+
-+char *
-+lt_extend_str (const char *orig_value, const char *add, int to_end)
-+{
-+ char *new_value;
-+ if (orig_value && *orig_value)
-+ {
-+ int orig_value_len = strlen (orig_value);
-+ int add_len = strlen (add);
-+ new_value = XMALLOC (char, add_len + orig_value_len + 1);
-+ if (to_end)
-+ {
-+ strcpy (new_value, orig_value);
-+ strcpy (new_value + orig_value_len, add);
-+ }
-+ else
-+ {
-+ strcpy (new_value, add);
-+ strcpy (new_value + add_len, orig_value);
-+ }
-+ }
-+ else
-+ {
-+ new_value = xstrdup (add);
-+ }
-+ return new_value;
-+}
-+
-+int
-+lt_split_name_value (const char *arg, char** name, char** value)
-+{
-+ const char *p;
-+ int len;
-+ if (!arg || !*arg)
-+ return 1;
-+
-+ p = strchr (arg, (int)'=');
-+
-+ if (!p)
-+ return 1;
-+
-+ *value = xstrdup (++p);
-+
-+ len = strlen (arg) - strlen (*value);
-+ *name = XMALLOC (char, len);
-+ strncpy (*name, arg, len-1);
-+ (*name)[len - 1] = '\0';
-+
-+ return 0;
-+}
-+
-+void
-+lt_opt_process_env_set (const char *arg)
-+{
-+ char *name = NULL;
-+ char *value = NULL;
-+
-+ if (lt_split_name_value (arg, &name, &value) != 0)
-+ {
-+ XFREE (name);
-+ XFREE (value);
-+ lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
-+ }
-+
-+ lt_setenv (name, value);
-+ XFREE (name);
-+ XFREE (value);
-+}
-+
-+void
-+lt_opt_process_env_prepend (const char *arg)
-+{
-+ char *name = NULL;
-+ char *value = NULL;
-+ char *new_value = NULL;
-+
-+ if (lt_split_name_value (arg, &name, &value) != 0)
-+ {
-+ XFREE (name);
-+ XFREE (value);
-+ lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
-+ }
-+
-+ new_value = lt_extend_str (getenv (name), value, 0);
-+ lt_setenv (name, new_value);
-+ XFREE (new_value);
-+ XFREE (name);
-+ XFREE (value);
-+}
-+
-+void
-+lt_opt_process_env_append (const char *arg)
-+{
-+ char *name = NULL;
-+ char *value = NULL;
-+ char *new_value = NULL;
-+
-+ if (lt_split_name_value (arg, &name, &value) != 0)
-+ {
-+ XFREE (name);
-+ XFREE (value);
-+ lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
-+ }
-+
-+ new_value = lt_extend_str (getenv (name), value, 1);
-+ lt_setenv (name, new_value);
-+ XFREE (new_value);
-+ XFREE (name);
-+ XFREE (value);
-+}
-+
-+void
-+lt_update_exe_path (const char *name, const char *value)
-+{
-+ LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
-+ (name ? name : "<NULL>"),
-+ (value ? value : "<NULL>")));
-+
-+ if (name && *name && value && *value)
-+ {
-+ char *new_value = lt_extend_str (getenv (name), value, 0);
-+ /* some systems can't cope with a ':'-terminated path #' */
-+ int len = strlen (new_value);
-+ while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
-+ {
-+ new_value[len-1] = '\0';
-+ }
-+ lt_setenv (name, new_value);
-+ XFREE (new_value);
-+ }
-+}
-+
-+void
-+lt_update_lib_path (const char *name, const char *value)
-+{
-+ LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
-+ (name ? name : "<NULL>"),
-+ (value ? value : "<NULL>")));
-+
-+ if (name && *name && value && *value)
-+ {
-+ char *new_value = lt_extend_str (getenv (name), value, 0);
-+ lt_setenv (name, new_value);
-+ XFREE (new_value);
-+ }
-+}
-+
-+
-+EOF
-+}
-+# end: func_emit_cwrapperexe_src
-+
-+# func_mode_link arg...
-+func_mode_link ()
-+{
-+ $opt_debug
-+ case $host in
-+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-+ # It is impossible to link a dll without this setting, and
-+ # we shouldn't force the makefile maintainer to figure out
-+ # which system we are compiling for in order to pass an extra
-+ # flag for every libtool invocation.
-+ # allow_undefined=no
-+
-+ # FIXME: Unfortunately, there are problems with the above when trying
-+ # to make a dll which has undefined symbols, in which case not
-+ # even a static library is built. For now, we need to specify
-+ # -no-undefined on the libtool link line when we can be certain
-+ # that all symbols are satisfied, otherwise we get a static library.
-+ allow_undefined=yes
-+ ;;
-+ *)
-+ allow_undefined=yes
-+ ;;
-+ esac
-+ libtool_args=$nonopt
-+ base_compile="$nonopt $@"
-+ compile_command=$nonopt
-+ finalize_command=$nonopt
-+
-+ compile_rpath=
-+ finalize_rpath=
-+ compile_shlibpath=
-+ finalize_shlibpath=
-+ convenience=
-+ old_convenience=
-+ deplibs=
-+ old_deplibs=
-+ compiler_flags=
-+ linker_flags=
-+ dllsearchpath=
-+ lib_search_path=`pwd`
-+ inst_prefix_dir=
-+ new_inherited_linker_flags=
-+
-+ avoid_version=no
-+ dlfiles=
-+ dlprefiles=
-+ dlself=no
-+ export_dynamic=no
-+ export_symbols=
-+ export_symbols_regex=
-+ generated=
-+ libobjs=
-+ ltlibs=
-+ module=no
-+ no_install=no
-+ objs=
-+ non_pic_objects=
-+ precious_files_regex=
-+ prefer_static_libs=no
-+ preload=no
-+ prev=
-+ prevarg=
-+ release=
-+ rpath=
-+ xrpath=
-+ perm_rpath=
-+ temp_rpath=
-+ thread_safe=no
-+ vinfo=
-+ vinfo_number=no
-+ weak_libs=
-+ single_module="${wl}-single_module"
-+ func_infer_tag $base_compile
-+
-+ # We need to know -static, to get the right output filenames.
-+ for arg
-+ do
-+ case $arg in
-+ -shared)
-+ test "$build_libtool_libs" != yes && \
-+ func_fatal_configuration "can not build a shared library"
-+ build_old_libs=no
-+ break
-+ ;;
-+ -all-static | -static | -static-libtool-libs)
-+ case $arg in
-+ -all-static)
-+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-+ func_warning "complete static linking is impossible in this configuration"
-+ fi
-+ if test -n "$link_static_flag"; then
-+ dlopen_self=$dlopen_self_static
-+ fi
-+ prefer_static_libs=yes
-+ ;;
-+ -static)
-+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
-+ dlopen_self=$dlopen_self_static
-+ fi
-+ prefer_static_libs=built
-+ ;;
-+ -static-libtool-libs)
-+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
-+ dlopen_self=$dlopen_self_static
-+ fi
-+ prefer_static_libs=yes
-+ ;;
-+ esac
-+ build_libtool_libs=no
-+ build_old_libs=yes
-+ break
-+ ;;
-+ esac
-+ done
-+
-+ # See if our shared archives depend on static archives.
-+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-+
-+ # Go through the arguments, transforming them on the way.
-+ while test "$#" -gt 0; do
-+ arg="$1"
-+ shift
-+ func_quote_for_eval "$arg"
-+ qarg=$func_quote_for_eval_unquoted_result
-+ func_append libtool_args " $func_quote_for_eval_result"
-+
-+ # If the previous option needs an argument, assign it.
-+ if test -n "$prev"; then
-+ case $prev in
-+ output)
-+ func_append compile_command " @OUTPUT@"
-+ func_append finalize_command " @OUTPUT@"
-+ ;;
-+ esac
-+
-+ case $prev in
-+ dlfiles|dlprefiles)
-+ if test "$preload" = no; then
-+ # Add the symbol object into the linking commands.
-+ func_append compile_command " @SYMFILE@"
-+ func_append finalize_command " @SYMFILE@"
-+ preload=yes
-+ fi
-+ case $arg in
-+ *.la | *.lo) ;; # We handle these cases below.
-+ force)
-+ if test "$dlself" = no; then
-+ dlself=needless
-+ export_dynamic=yes
-+ fi
-+ prev=
-+ continue
-+ ;;
-+ self)
-+ if test "$prev" = dlprefiles; then
-+ dlself=yes
-+ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
-+ dlself=yes
-+ else
-+ dlself=needless
-+ export_dynamic=yes
-+ fi
-+ prev=
-+ continue
-+ ;;
-+ *)
-+ if test "$prev" = dlfiles; then
-+ dlfiles="$dlfiles $arg"
-+ else
-+ dlprefiles="$dlprefiles $arg"
-+ fi
-+ prev=
-+ continue
-+ ;;
-+ esac
-+ ;;
-+ expsyms)
-+ export_symbols="$arg"
-+ test -f "$arg" \
-+ || func_fatal_error "symbol file \`$arg' does not exist"
-+ prev=
-+ continue
-+ ;;
-+ expsyms_regex)
-+ export_symbols_regex="$arg"
-+ prev=
-+ continue
-+ ;;
-+ framework)
-+ case $host in
-+ *-*-darwin*)
-+ case "$deplibs " in
-+ *" $qarg.ltframework "*) ;;
-+ *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ prev=
-+ continue
-+ ;;
-+ inst_prefix)
-+ inst_prefix_dir="$arg"
-+ prev=
-+ continue
-+ ;;
-+ objectlist)
-+ if test -f "$arg"; then
-+ save_arg=$arg
-+ moreargs=
-+ for fil in `cat "$save_arg"`
-+ do
-+# moreargs="$moreargs $fil"
-+ arg=$fil
-+ # A libtool-controlled object.
-+
-+ # Check to see that this really is a libtool object.
-+ if func_lalib_unsafe_p "$arg"; then
-+ pic_object=
-+ non_pic_object=
-+
-+ # Read the .lo file
-+ func_source "$arg"
-+
-+ if test -z "$pic_object" ||
-+ test -z "$non_pic_object" ||
-+ test "$pic_object" = none &&
-+ test "$non_pic_object" = none; then
-+ func_fatal_error "cannot find name of object for \`$arg'"
-+ fi
-+
-+ # Extract subdirectory from the argument.
-+ func_dirname "$arg" "/" ""
-+ xdir="$func_dirname_result"
-+
-+ if test "$pic_object" != none; then
-+ # Prepend the subdirectory the object is found in.
-+ pic_object="$xdir$pic_object"
-+
-+ if test "$prev" = dlfiles; then
-+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-+ dlfiles="$dlfiles $pic_object"
-+ prev=
-+ continue
-+ else
-+ # If libtool objects are unsupported, then we need to preload.
-+ prev=dlprefiles
-+ fi
-+ fi
-+
-+ # CHECK ME: I think I busted this. -Ossama
-+ if test "$prev" = dlprefiles; then
-+ # Preload the old-style object.
-+ dlprefiles="$dlprefiles $pic_object"
-+ prev=
-+ fi
-+
-+ # A PIC object.
-+ func_append libobjs " $pic_object"
-+ arg="$pic_object"
-+ fi
-+
-+ # Non-PIC object.
-+ if test "$non_pic_object" != none; then
-+ # Prepend the subdirectory the object is found in.
-+ non_pic_object="$xdir$non_pic_object"
-+
-+ # A standard non-PIC object
-+ func_append non_pic_objects " $non_pic_object"
-+ if test -z "$pic_object" || test "$pic_object" = none ; then
-+ arg="$non_pic_object"
-+ fi
-+ else
-+ # If the PIC object exists, use it instead.
-+ # $xdir was prepended to $pic_object above.
-+ non_pic_object="$pic_object"
-+ func_append non_pic_objects " $non_pic_object"
-+ fi
-+ else
-+ # Only an error if not doing a dry-run.
-+ if $opt_dry_run; then
-+ # Extract subdirectory from the argument.
-+ func_dirname "$arg" "/" ""
-+ xdir="$func_dirname_result"
-+
-+ func_lo2o "$arg"
-+ pic_object=$xdir$objdir/$func_lo2o_result
-+ non_pic_object=$xdir$func_lo2o_result
-+ func_append libobjs " $pic_object"
-+ func_append non_pic_objects " $non_pic_object"
-+ else
-+ func_fatal_error "\`$arg' is not a valid libtool object"
-+ fi
-+ fi
-+ done
-+ else
-+ func_fatal_error "link input file \`$arg' does not exist"
-+ fi
-+ arg=$save_arg
-+ prev=
-+ continue
-+ ;;
-+ precious_regex)
-+ precious_files_regex="$arg"
-+ prev=
-+ continue
-+ ;;
-+ release)
-+ release="-$arg"
-+ prev=
-+ continue
-+ ;;
-+ rpath | xrpath)
-+ # We need an absolute path.
-+ case $arg in
-+ [\\/]* | [A-Za-z]:[\\/]*) ;;
-+ *)
-+ func_fatal_error "only absolute run-paths are allowed"
-+ ;;
-+ esac
-+ if test "$prev" = rpath; then
-+ case "$rpath " in
-+ *" $arg "*) ;;
-+ *) rpath="$rpath $arg" ;;
-+ esac
-+ else
-+ case "$xrpath " in
-+ *" $arg "*) ;;
-+ *) xrpath="$xrpath $arg" ;;
-+ esac
-+ fi
-+ prev=
-+ continue
-+ ;;
-+ shrext)
-+ shrext_cmds="$arg"
-+ prev=
-+ continue
-+ ;;
-+ weak)
-+ weak_libs="$weak_libs $arg"
-+ prev=
-+ continue
-+ ;;
-+ xcclinker)
-+ linker_flags="$linker_flags $qarg"
-+ compiler_flags="$compiler_flags $qarg"
-+ prev=
-+ func_append compile_command " $qarg"
-+ func_append finalize_command " $qarg"
-+ continue
-+ ;;
-+ xcompiler)
-+ compiler_flags="$compiler_flags $qarg"
-+ prev=
-+ func_append compile_command " $qarg"
-+ func_append finalize_command " $qarg"
-+ continue
-+ ;;
-+ xlinker)
-+ linker_flags="$linker_flags $qarg"
-+ compiler_flags="$compiler_flags $wl$qarg"
-+ prev=
-+ func_append compile_command " $wl$qarg"
-+ func_append finalize_command " $wl$qarg"
-+ continue
-+ ;;
-+ *)
-+ eval "$prev=\"\$arg\""
-+ prev=
-+ continue
-+ ;;
-+ esac
-+ fi # test -n "$prev"
-+
-+ prevarg="$arg"
-+
-+ case $arg in
-+ -all-static)
-+ if test -n "$link_static_flag"; then
-+ # See comment for -static flag below, for more details.
-+ func_append compile_command " $link_static_flag"
-+ func_append finalize_command " $link_static_flag"
-+ fi
-+ continue
-+ ;;
-+
-+ -allow-undefined)
-+ # FIXME: remove this flag sometime in the future.
-+ func_fatal_error "\`-allow-undefined' must not be used because it is the default"
-+ ;;
-+
-+ -avoid-version)
-+ avoid_version=yes
-+ continue
-+ ;;
-+
-+ -dlopen)
-+ prev=dlfiles
-+ continue
-+ ;;
-+
-+ -dlpreopen)
-+ prev=dlprefiles
-+ continue
-+ ;;
-+
-+ -export-dynamic)
-+ export_dynamic=yes
-+ continue
-+ ;;
-+
-+ -export-symbols | -export-symbols-regex)
-+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-+ func_fatal_error "more than one -exported-symbols argument is not allowed"
-+ fi
-+ if test "X$arg" = "X-export-symbols"; then
-+ prev=expsyms
-+ else
-+ prev=expsyms_regex
-+ fi
-+ continue
-+ ;;
-+
-+ -framework)
-+ prev=framework
-+ continue
-+ ;;
-+
-+ -inst-prefix-dir)
-+ prev=inst_prefix
-+ continue
-+ ;;
-+
-+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
-+ # so, if we see these flags be careful not to treat them like -L
-+ -L[A-Z][A-Z]*:*)
-+ case $with_gcc/$host in
-+ no/*-*-irix* | /*-*-irix*)
-+ func_append compile_command " $arg"
-+ func_append finalize_command " $arg"
-+ ;;
-+ esac
-+ continue
-+ ;;
-+
-+ -L*)
-+ func_stripname '-L' '' "$arg"
-+ dir=$func_stripname_result
-+ if test -z "$dir"; then
-+ if test "$#" -gt 0; then
-+ func_fatal_error "require no space between \`-L' and \`$1'"
-+ else
-+ func_fatal_error "need path for \`-L' option"
-+ fi
-+ fi
-+ # We need an absolute path.
-+ case $dir in
-+ [\\/]* | [A-Za-z]:[\\/]*) ;;
-+ *)
-+ absdir=`cd "$dir" && pwd`
-+ test -z "$absdir" && \
-+ func_fatal_error "cannot determine absolute directory name of \`$dir'"
-+ dir="$absdir"
-+ ;;
-+ esac
-+ case "$deplibs " in
-+ *" -L$dir "*) ;;
-+ *)
-+ deplibs="$deplibs -L$dir"
-+ lib_search_path="$lib_search_path $dir"
-+ ;;
-+ esac
-+ case $host in
-+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-+ testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
-+ case :$dllsearchpath: in
-+ *":$dir:"*) ;;
-+ ::) dllsearchpath=$dir;;
-+ *) dllsearchpath="$dllsearchpath:$dir";;
-+ esac
-+ case :$dllsearchpath: in
-+ *":$testbindir:"*) ;;
-+ ::) dllsearchpath=$testbindir;;
-+ *) dllsearchpath="$dllsearchpath:$testbindir";;
-+ esac
-+ ;;
-+ esac
-+ continue
-+ ;;
-+
-+ -l*)
-+ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
-+ case $host in
-+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
-+ # These systems don't actually have a C or math library (as such)
-+ continue
-+ ;;
-+ *-*-os2*)
-+ # These systems don't actually have a C library (as such)
-+ test "X$arg" = "X-lc" && continue
-+ ;;
-+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-+ # Do not include libc due to us having libc/libc_r.
-+ test "X$arg" = "X-lc" && continue
-+ ;;
-+ *-*-rhapsody* | *-*-darwin1.[012])
-+ # Rhapsody C and math libraries are in the System framework
-+ deplibs="$deplibs System.ltframework"
-+ continue
-+ ;;
-+ *-*-sco3.2v5* | *-*-sco5v6*)
-+ # Causes problems with __ctype
-+ test "X$arg" = "X-lc" && continue
-+ ;;
-+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
-+ # Compiler inserts libc in the correct place for threads to work
-+ test "X$arg" = "X-lc" && continue
-+ ;;
-+ esac
-+ elif test "X$arg" = "X-lc_r"; then
-+ case $host in
-+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-+ # Do not include libc_r directly, use -pthread flag.
-+ continue
-+ ;;
-+ esac
-+ fi
-+ deplibs="$deplibs $arg"
-+ continue
-+ ;;
-+
-+ -module)
-+ module=yes
-+ continue
-+ ;;
-+
-+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
-+ # classes, name mangling, and exception handling.
-+ # Darwin uses the -arch flag to determine output architecture.
-+ -model|-arch|-isysroot)
-+ compiler_flags="$compiler_flags $arg"
-+ func_append compile_command " $arg"
-+ func_append finalize_command " $arg"
-+ prev=xcompiler
-+ continue
-+ ;;
-+
-+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
-+ compiler_flags="$compiler_flags $arg"
-+ func_append compile_command " $arg"
-+ func_append finalize_command " $arg"
-+ case "$new_inherited_linker_flags " in
-+ *" $arg "*) ;;
-+ * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
-+ esac
-+ continue
-+ ;;
-+
-+ -multi_module)
-+ single_module="${wl}-multi_module"
-+ continue
-+ ;;
-+
-+ -no-fast-install)
-+ fast_install=no
-+ continue
-+ ;;
-+
-+ -no-install)
-+ case $host in
-+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
-+ # The PATH hackery in wrapper scripts is required on Windows
-+ # and Darwin in order for the loader to find any dlls it needs.
-+ func_warning "\`-no-install' is ignored for $host"
-+ func_warning "assuming \`-no-fast-install' instead"
-+ fast_install=no
-+ ;;
-+ *) no_install=yes ;;
-+ esac
-+ continue
-+ ;;
-+
-+ -no-undefined)
-+ allow_undefined=no
-+ continue
-+ ;;
-+
-+ -objectlist)
-+ prev=objectlist
-+ continue
-+ ;;
-+
-+ -o) prev=output ;;
-+
-+ -precious-files-regex)
-+ prev=precious_regex
-+ continue
-+ ;;
-+
-+ -release)
-+ prev=release
-+ continue
-+ ;;
-+
-+ -rpath)
-+ prev=rpath
-+ continue
-+ ;;
-+
-+ -R)
-+ prev=xrpath
-+ continue
-+ ;;
-+
-+ -R*)
-+ func_stripname '-R' '' "$arg"
-+ dir=$func_stripname_result
-+ # We need an absolute path.
-+ case $dir in
-+ [\\/]* | [A-Za-z]:[\\/]*) ;;
-+ *)
-+ func_fatal_error "only absolute run-paths are allowed"
-+ ;;
-+ esac
-+ case "$xrpath " in
-+ *" $dir "*) ;;
-+ *) xrpath="$xrpath $dir" ;;
-+ esac
-+ continue
-+ ;;
-+
-+ -shared)
-+ # The effects of -shared are defined in a previous loop.
-+ continue
-+ ;;
-+
-+ -shrext)
-+ prev=shrext
-+ continue
-+ ;;
-+
-+ -static | -static-libtool-libs)
-+ # The effects of -static are defined in a previous loop.
-+ # We used to do the same as -all-static on platforms that
-+ # didn't have a PIC flag, but the assumption that the effects
-+ # would be equivalent was wrong. It would break on at least
-+ # Digital Unix and AIX.
-+ continue
-+ ;;
-+
-+ -thread-safe)
-+ thread_safe=yes
-+ continue
-+ ;;
-+
-+ -version-info)
-+ prev=vinfo
-+ continue
-+ ;;
-+
-+ -version-number)
-+ prev=vinfo
-+ vinfo_number=yes
-+ continue
-+ ;;
-+
-+ -weak)
-+ prev=weak
-+ continue
-+ ;;
-+
-+ -Wc,*)
-+ func_stripname '-Wc,' '' "$arg"
-+ args=$func_stripname_result
-+ arg=
-+ save_ifs="$IFS"; IFS=','
-+ for flag in $args; do
-+ IFS="$save_ifs"
-+ func_quote_for_eval "$flag"
-+ arg="$arg $wl$func_quote_for_eval_result"
-+ compiler_flags="$compiler_flags $func_quote_for_eval_result"
-+ done
-+ IFS="$save_ifs"
-+ func_stripname ' ' '' "$arg"
-+ arg=$func_stripname_result
-+ ;;
-+
-+ -Wl,*)
-+ func_stripname '-Wl,' '' "$arg"
-+ args=$func_stripname_result
-+ arg=
-+ save_ifs="$IFS"; IFS=','
-+ for flag in $args; do
-+ IFS="$save_ifs"
-+ func_quote_for_eval "$flag"
-+ arg="$arg $wl$func_quote_for_eval_result"
-+ compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
-+ linker_flags="$linker_flags $func_quote_for_eval_result"
-+ done
-+ IFS="$save_ifs"
-+ func_stripname ' ' '' "$arg"
-+ arg=$func_stripname_result
-+ ;;
-+
-+ -Xcompiler)
-+ prev=xcompiler
-+ continue
-+ ;;
-+
-+ -Xlinker)
-+ prev=xlinker
-+ continue
-+ ;;
-+
-+ -XCClinker)
-+ prev=xcclinker
-+ continue
-+ ;;
-+
-+ # -msg_* for osf cc
-+ -msg_*)
-+ func_quote_for_eval "$arg"
-+ arg="$func_quote_for_eval_result"
-+ ;;
-+
-+ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
-+ # -r[0-9][0-9]* specifies the processor on the SGI compiler
-+ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
-+ # +DA*, +DD* enable 64-bit mode on the HP compiler
-+ # -q* pass through compiler args for the IBM compiler
-+ # -m*, -t[45]*, -txscale* pass through architecture-specific
-+ # compiler args for GCC
-+ # -F/path gives path to uninstalled frameworks, gcc on darwin
-+ # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
-+ # @file GCC response files
-+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-fstack-protector*|-flto)
-+ func_quote_for_eval "$arg"
-+ arg="$func_quote_for_eval_result"
-+ func_append compile_command " $arg"
-+ func_append finalize_command " $arg"
-+ compiler_flags="$compiler_flags $arg"
-+ continue
-+ ;;
-+
-+ # Some other compiler flag.
-+ -* | +*)
-+ func_quote_for_eval "$arg"
-+ arg="$func_quote_for_eval_result"
-+ ;;
-+
-+ *.$objext)
-+ # A standard object.
-+ objs="$objs $arg"
-+ ;;
-+
-+ *.lo)
-+ # A libtool-controlled object.
-+
-+ # Check to see that this really is a libtool object.
-+ if func_lalib_unsafe_p "$arg"; then
-+ pic_object=
-+ non_pic_object=
-+
-+ # Read the .lo file
-+ func_source "$arg"
-+
-+ if test -z "$pic_object" ||
-+ test -z "$non_pic_object" ||
-+ test "$pic_object" = none &&
-+ test "$non_pic_object" = none; then
-+ func_fatal_error "cannot find name of object for \`$arg'"
-+ fi
-+
-+ # Extract subdirectory from the argument.
-+ func_dirname "$arg" "/" ""
-+ xdir="$func_dirname_result"
-+
-+ if test "$pic_object" != none; then
-+ # Prepend the subdirectory the object is found in.
-+ pic_object="$xdir$pic_object"
-+
-+ if test "$prev" = dlfiles; then
-+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-+ dlfiles="$dlfiles $pic_object"
-+ prev=
-+ continue
-+ else
-+ # If libtool objects are unsupported, then we need to preload.
-+ prev=dlprefiles
-+ fi
-+ fi
-+
-+ # CHECK ME: I think I busted this. -Ossama
-+ if test "$prev" = dlprefiles; then
-+ # Preload the old-style object.
-+ dlprefiles="$dlprefiles $pic_object"
-+ prev=
-+ fi
-+
-+ # A PIC object.
-+ func_append libobjs " $pic_object"
-+ arg="$pic_object"
-+ fi
-+
-+ # Non-PIC object.
-+ if test "$non_pic_object" != none; then
-+ # Prepend the subdirectory the object is found in.
-+ non_pic_object="$xdir$non_pic_object"
-+
-+ # A standard non-PIC object
-+ func_append non_pic_objects " $non_pic_object"
-+ if test -z "$pic_object" || test "$pic_object" = none ; then
-+ arg="$non_pic_object"
-+ fi
-+ else
-+ # If the PIC object exists, use it instead.
-+ # $xdir was prepended to $pic_object above.
-+ non_pic_object="$pic_object"
-+ func_append non_pic_objects " $non_pic_object"
-+ fi
-+ else
-+ # Only an error if not doing a dry-run.
-+ if $opt_dry_run; then
-+ # Extract subdirectory from the argument.
-+ func_dirname "$arg" "/" ""
-+ xdir="$func_dirname_result"
-+
-+ func_lo2o "$arg"
-+ pic_object=$xdir$objdir/$func_lo2o_result
-+ non_pic_object=$xdir$func_lo2o_result
-+ func_append libobjs " $pic_object"
-+ func_append non_pic_objects " $non_pic_object"
-+ else
-+ func_fatal_error "\`$arg' is not a valid libtool object"
-+ fi
-+ fi
-+ ;;
-+
-+ *.$libext)
-+ # An archive.
-+ deplibs="$deplibs $arg"
-+ old_deplibs="$old_deplibs $arg"
-+ continue
-+ ;;
-+
-+ *.la)
-+ # A libtool-controlled library.
-+
-+ if test "$prev" = dlfiles; then
-+ # This library was specified with -dlopen.
-+ dlfiles="$dlfiles $arg"
-+ prev=
-+ elif test "$prev" = dlprefiles; then
-+ # The library was specified with -dlpreopen.
-+ dlprefiles="$dlprefiles $arg"
-+ prev=
-+ else
-+ deplibs="$deplibs $arg"
-+ fi
-+ continue
-+ ;;
-+
-+ # Some other compiler argument.
-+ *)
-+ # Unknown arguments in both finalize_command and compile_command need
-+ # to be aesthetically quoted because they are evaled later.
-+ func_quote_for_eval "$arg"
-+ arg="$func_quote_for_eval_result"
-+ ;;
-+ esac # arg
-+
-+ # Now actually substitute the argument into the commands.
-+ if test -n "$arg"; then
-+ func_append compile_command " $arg"
-+ func_append finalize_command " $arg"
-+ fi
-+ done # argument parsing loop
-+
-+ test -n "$prev" && \
-+ func_fatal_help "the \`$prevarg' option requires an argument"
-+
-+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
-+ eval arg=\"$export_dynamic_flag_spec\"
-+ func_append compile_command " $arg"
-+ func_append finalize_command " $arg"
-+ fi
-+
-+ oldlibs=
-+ # calculate the name of the file, without its directory
-+ func_basename "$output"
-+ outputname="$func_basename_result"
-+ libobjs_save="$libobjs"
-+
-+ if test -n "$shlibpath_var"; then
-+ # get the directories listed in $shlibpath_var
-+ eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
-+ else
-+ shlib_search_path=
-+ fi
-+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
-+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-+
-+ func_dirname "$output" "/" ""
-+ output_objdir="$func_dirname_result$objdir"
-+ # Create the object directory.
-+ func_mkdir_p "$output_objdir"
-+
-+ # Determine the type of output
-+ case $output in
-+ "")
-+ func_fatal_help "you must specify an output file"
-+ ;;
-+ *.$libext) linkmode=oldlib ;;
-+ *.lo | *.$objext) linkmode=obj ;;
-+ *.la) linkmode=lib ;;
-+ *) linkmode=prog ;; # Anything else should be a program.
-+ esac
-+
-+ specialdeplibs=
-+
-+ libs=
-+ # Find all interdependent deplibs by searching for libraries
-+ # that are linked more than once (e.g. -la -lb -la)
-+ for deplib in $deplibs; do
-+ if $opt_duplicate_deps ; then
-+ case "$libs " in
-+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ esac
-+ fi
-+ libs="$libs $deplib"
-+ done
-+
-+ if test "$linkmode" = lib; then
-+ libs="$predeps $libs $compiler_lib_search_path $postdeps"
-+
-+ # Compute libraries that are listed more than once in $predeps
-+ # $postdeps and mark them as special (i.e., whose duplicates are
-+ # not to be eliminated).
-+ pre_post_deps=
-+ if $opt_duplicate_compiler_generated_deps; then
-+ for pre_post_dep in $predeps $postdeps; do
-+ case "$pre_post_deps " in
-+ *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
-+ esac
-+ pre_post_deps="$pre_post_deps $pre_post_dep"
-+ done
-+ fi
-+ pre_post_deps=
-+ fi
-+
-+ deplibs=
-+ newdependency_libs=
-+ newlib_search_path=
-+ need_relink=no # whether we're linking any uninstalled libtool libraries
-+ notinst_deplibs= # not-installed libtool libraries
-+ notinst_path= # paths that contain not-installed libtool libraries
-+
-+ case $linkmode in
-+ lib)
-+ passes="conv dlpreopen link"
-+ for file in $dlfiles $dlprefiles; do
-+ case $file in
-+ *.la) ;;
-+ *)
-+ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
-+ ;;
-+ esac
-+ done
-+ ;;
-+ prog)
-+ compile_deplibs=
-+ finalize_deplibs=
-+ alldeplibs=no
-+ newdlfiles=
-+ newdlprefiles=
-+ passes="conv scan dlopen dlpreopen link"
-+ ;;
-+ *) passes="conv"
-+ ;;
-+ esac
-+
-+ for pass in $passes; do
-+ # The preopen pass in lib mode reverses $deplibs; put it back here
-+ # so that -L comes before libs that need it for instance...
-+ if test "$linkmode,$pass" = "lib,link"; then
-+ ## FIXME: Find the place where the list is rebuilt in the wrong
-+ ## order, and fix it there properly
-+ tmp_deplibs=
-+ for deplib in $deplibs; do
-+ tmp_deplibs="$deplib $tmp_deplibs"
-+ done
-+ deplibs="$tmp_deplibs"
-+ fi
-+
-+ if test "$linkmode,$pass" = "lib,link" ||
-+ test "$linkmode,$pass" = "prog,scan"; then
-+ libs="$deplibs"
-+ deplibs=
-+ fi
-+ if test "$linkmode" = prog; then
-+ case $pass in
-+ dlopen) libs="$dlfiles" ;;
-+ dlpreopen) libs="$dlprefiles" ;;
-+ link)
-+ libs="$deplibs %DEPLIBS%"
-+ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
-+ ;;
-+ esac
-+ fi
-+ if test "$linkmode,$pass" = "lib,dlpreopen"; then
-+ # Collect and forward deplibs of preopened libtool libs
-+ for lib in $dlprefiles; do
-+ # Ignore non-libtool-libs
-+ dependency_libs=
-+ case $lib in
-+ *.la) func_source "$lib" ;;
-+ esac
-+
-+ # Collect preopened libtool deplibs, except any this library
-+ # has declared as weak libs
-+ for deplib in $dependency_libs; do
-+ deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
-+ case " $weak_libs " in
-+ *" $deplib_base "*) ;;
-+ *) deplibs="$deplibs $deplib" ;;
-+ esac
-+ done
-+ done
-+ libs="$dlprefiles"
-+ fi
-+ if test "$pass" = dlopen; then
-+ # Collect dlpreopened libraries
-+ save_deplibs="$deplibs"
-+ deplibs=
-+ fi
-+
-+ for deplib in $libs; do
-+ lib=
-+ found=no
-+ case $deplib in
-+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
-+ if test "$linkmode,$pass" = "prog,link"; then
-+ compile_deplibs="$deplib $compile_deplibs"
-+ finalize_deplibs="$deplib $finalize_deplibs"
-+ else
-+ compiler_flags="$compiler_flags $deplib"
-+ if test "$linkmode" = lib ; then
-+ case "$new_inherited_linker_flags " in
-+ *" $deplib "*) ;;
-+ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
-+ esac
-+ fi
-+ fi
-+ continue
-+ ;;
-+ -l*)
-+ if test "$linkmode" != lib && test "$linkmode" != prog; then
-+ func_warning "\`-l' is ignored for archives/objects"
-+ continue
-+ fi
-+ func_stripname '-l' '' "$deplib"
-+ name=$func_stripname_result
-+ if test "$linkmode" = lib; then
-+ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
-+ else
-+ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
-+ fi
-+ for searchdir in $searchdirs; do
-+ for search_ext in .la $std_shrext .so .a; do
-+ # Search the libtool library
-+ lib="$searchdir/lib${name}${search_ext}"
-+ if test -f "$lib"; then
-+ if test "$search_ext" = ".la"; then
-+ found=yes
-+ else
-+ found=no
-+ fi
-+ break 2
-+ fi
-+ done
-+ done
-+ if test "$found" != yes; then
-+ # deplib doesn't seem to be a libtool library
-+ if test "$linkmode,$pass" = "prog,link"; then
-+ compile_deplibs="$deplib $compile_deplibs"
-+ finalize_deplibs="$deplib $finalize_deplibs"
-+ else
-+ deplibs="$deplib $deplibs"
-+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-+ fi
-+ continue
-+ else # deplib is a libtool library
-+ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
-+ # We need to do some special things here, and not later.
-+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-+ case " $predeps $postdeps " in
-+ *" $deplib "*)
-+ if func_lalib_p "$lib"; then
-+ library_names=
-+ old_library=
-+ func_source "$lib"
-+ for l in $old_library $library_names; do
-+ ll="$l"
-+ done
-+ if test "X$ll" = "X$old_library" ; then # only static version available
-+ found=no
-+ func_dirname "$lib" "" "."
-+ ladir="$func_dirname_result"
-+ lib=$ladir/$old_library
-+ if test "$linkmode,$pass" = "prog,link"; then
-+ compile_deplibs="$deplib $compile_deplibs"
-+ finalize_deplibs="$deplib $finalize_deplibs"
-+ else
-+ deplibs="$deplib $deplibs"
-+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-+ fi
-+ continue
-+ fi
-+ fi
-+ ;;
-+ *) ;;
-+ esac
-+ fi
-+ fi
-+ ;; # -l
-+ *.ltframework)
-+ if test "$linkmode,$pass" = "prog,link"; then
-+ compile_deplibs="$deplib $compile_deplibs"
-+ finalize_deplibs="$deplib $finalize_deplibs"
-+ else
-+ deplibs="$deplib $deplibs"
-+ if test "$linkmode" = lib ; then
-+ case "$new_inherited_linker_flags " in
-+ *" $deplib "*) ;;
-+ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
-+ esac
-+ fi
-+ fi
-+ continue
-+ ;;
-+ -L*)
-+ case $linkmode in
-+ lib)
-+ deplibs="$deplib $deplibs"
-+ test "$pass" = conv && continue
-+ newdependency_libs="$deplib $newdependency_libs"
-+ func_stripname '-L' '' "$deplib"
-+ newlib_search_path="$newlib_search_path $func_stripname_result"
-+ ;;
-+ prog)
-+ if test "$pass" = conv; then
-+ deplibs="$deplib $deplibs"
-+ continue
-+ fi
-+ if test "$pass" = scan; then
-+ deplibs="$deplib $deplibs"
-+ else
-+ compile_deplibs="$deplib $compile_deplibs"
-+ finalize_deplibs="$deplib $finalize_deplibs"
-+ fi
-+ func_stripname '-L' '' "$deplib"
-+ newlib_search_path="$newlib_search_path $func_stripname_result"
-+ ;;
-+ *)
-+ func_warning "\`-L' is ignored for archives/objects"
-+ ;;
-+ esac # linkmode
-+ continue
-+ ;; # -L
-+ -R*)
-+ if test "$pass" = link; then
-+ func_stripname '-R' '' "$deplib"
-+ dir=$func_stripname_result
-+ # Make sure the xrpath contains only unique directories.
-+ case "$xrpath " in
-+ *" $dir "*) ;;
-+ *) xrpath="$xrpath $dir" ;;
-+ esac
-+ fi
-+ deplibs="$deplib $deplibs"
-+ continue
-+ ;;
-+ *.la) lib="$deplib" ;;
-+ *.$libext)
-+ if test "$pass" = conv; then
-+ deplibs="$deplib $deplibs"
-+ continue
-+ fi
-+ case $linkmode in
-+ lib)
-+ # Linking convenience modules into shared libraries is allowed,
-+ # but linking other static libraries is non-portable.
-+ case " $dlpreconveniencelibs " in
-+ *" $deplib "*) ;;
-+ *)
-+ valid_a_lib=no
-+ case $deplibs_check_method in
-+ match_pattern*)
-+ set dummy $deplibs_check_method; shift
-+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-+ if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
-+ | $EGREP "$match_pattern_regex" > /dev/null; then
-+ valid_a_lib=yes
-+ fi
-+ ;;
-+ pass_all)
-+ valid_a_lib=yes
-+ ;;
-+ esac
-+ if test "$valid_a_lib" != yes; then
-+ $ECHO
-+ $ECHO "*** Warning: Trying to link with static lib archive $deplib."
-+ $ECHO "*** I have the capability to make that library automatically link in when"
-+ $ECHO "*** you link to this library. But I can only do this if you have a"
-+ $ECHO "*** shared version of the library, which you do not appear to have"
-+ $ECHO "*** because the file extensions .$libext of this argument makes me believe"
-+ $ECHO "*** that it is just a static archive that I should not use here."
-+ else
-+ $ECHO
-+ $ECHO "*** Warning: Linking the shared library $output against the"
-+ $ECHO "*** static library $deplib is not portable!"
-+ deplibs="$deplib $deplibs"
-+ fi
-+ ;;
-+ esac
-+ continue
-+ ;;
-+ prog)
-+ if test "$pass" != link; then
-+ deplibs="$deplib $deplibs"
-+ else
-+ compile_deplibs="$deplib $compile_deplibs"
-+ finalize_deplibs="$deplib $finalize_deplibs"
-+ fi
-+ continue
-+ ;;
-+ esac # linkmode
-+ ;; # *.$libext
-+ *.lo | *.$objext)
-+ if test "$pass" = conv; then
-+ deplibs="$deplib $deplibs"
-+ elif test "$linkmode" = prog; then
-+ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-+ # If there is no dlopen support or we're linking statically,
-+ # we need to preload.
-+ newdlprefiles="$newdlprefiles $deplib"
-+ compile_deplibs="$deplib $compile_deplibs"
-+ finalize_deplibs="$deplib $finalize_deplibs"
-+ else
-+ newdlfiles="$newdlfiles $deplib"
-+ fi
-+ fi
-+ continue
-+ ;;
-+ %DEPLIBS%)
-+ alldeplibs=yes
-+ continue
-+ ;;
-+ esac # case $deplib
-+
-+ if test "$found" = yes || test -f "$lib"; then :
-+ else
-+ func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
-+ fi
-+
-+ # Check to see that this really is a libtool archive.
-+ func_lalib_unsafe_p "$lib" \
-+ || func_fatal_error "\`$lib' is not a valid libtool archive"
-+
-+ func_dirname "$lib" "" "."
-+ ladir="$func_dirname_result"
-+
-+ dlname=
-+ dlopen=
-+ dlpreopen=
-+ libdir=
-+ library_names=
-+ old_library=
-+ inherited_linker_flags=
-+ # If the library was installed with an old release of libtool,
-+ # it will not redefine variables installed, or shouldnotlink
-+ installed=yes
-+ shouldnotlink=no
-+ avoidtemprpath=
-+
-+
-+ # Read the .la file
-+ func_source "$lib"
-+
-+ # Convert "-framework foo" to "foo.ltframework"
-+ if test -n "$inherited_linker_flags"; then
-+ tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
-+ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
-+ case " $new_inherited_linker_flags " in
-+ *" $tmp_inherited_linker_flag "*) ;;
-+ *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
-+ esac
-+ done
-+ fi
-+ dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-+ if test "$linkmode,$pass" = "lib,link" ||
-+ test "$linkmode,$pass" = "prog,scan" ||
-+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then
-+ test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
-+ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
-+ fi
-+
-+ if test "$pass" = conv; then
-+ # Only check for convenience libraries
-+ deplibs="$lib $deplibs"
-+ if test -z "$libdir"; then
-+ if test -z "$old_library"; then
-+ func_fatal_error "cannot find name of link library for \`$lib'"
-+ fi
-+ # It is a libtool convenience library, so add in its objects.
-+ convenience="$convenience $ladir/$objdir/$old_library"
-+ old_convenience="$old_convenience $ladir/$objdir/$old_library"
-+ tmp_libs=
-+ for deplib in $dependency_libs; do
-+ deplibs="$deplib $deplibs"
-+ if $opt_duplicate_deps ; then
-+ case "$tmp_libs " in
-+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ esac
-+ fi
-+ tmp_libs="$tmp_libs $deplib"
-+ done
-+ elif test "$linkmode" != prog && test "$linkmode" != lib; then
-+ func_fatal_error "\`$lib' is not a convenience library"
-+ fi
-+ continue
-+ fi # $pass = conv
-+
-+
-+ # Get the name of the library we link against.
-+ linklib=
-+ for l in $old_library $library_names; do
-+ linklib="$l"
-+ done
-+ if test -z "$linklib"; then
-+ func_fatal_error "cannot find name of link library for \`$lib'"
-+ fi
-+
-+ # This library was specified with -dlopen.
-+ if test "$pass" = dlopen; then
-+ if test -z "$libdir"; then
-+ func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
-+ fi
-+ if test -z "$dlname" ||
-+ test "$dlopen_support" != yes ||
-+ test "$build_libtool_libs" = no; then
-+ # If there is no dlname, no dlopen support or we're linking
-+ # statically, we need to preload. We also need to preload any
-+ # dependent libraries so libltdl's deplib preloader doesn't
-+ # bomb out in the load deplibs phase.
-+ dlprefiles="$dlprefiles $lib $dependency_libs"
-+ else
-+ newdlfiles="$newdlfiles $lib"
-+ fi
-+ continue
-+ fi # $pass = dlopen
-+
-+ # We need an absolute path.
-+ case $ladir in
-+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
-+ *)
-+ abs_ladir=`cd "$ladir" && pwd`
-+ if test -z "$abs_ladir"; then
-+ func_warning "cannot determine absolute directory name of \`$ladir'"
-+ func_warning "passing it literally to the linker, although it might fail"
-+ abs_ladir="$ladir"
-+ fi
-+ ;;
-+ esac
-+ func_basename "$lib"
-+ laname="$func_basename_result"
-+
-+ # Find the relevant object directory and library name.
-+ if test "X$installed" = Xyes; then
-+ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-+ func_warning "library \`$lib' was moved."
-+ dir="$ladir"
-+ absdir="$abs_ladir"
-+ libdir="$abs_ladir"
-+ else
-+ dir="$libdir"
-+ absdir="$libdir"
-+ fi
-+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
-+ else
-+ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-+ dir="$ladir"
-+ absdir="$abs_ladir"
-+ # Remove this search path later
-+ notinst_path="$notinst_path $abs_ladir"
-+ else
-+ dir="$ladir/$objdir"
-+ absdir="$abs_ladir/$objdir"
-+ # Remove this search path later
-+ notinst_path="$notinst_path $abs_ladir"
-+ fi
-+ fi # $installed = yes
-+ func_stripname 'lib' '.la' "$laname"
-+ name=$func_stripname_result
-+
-+ # This library was specified with -dlpreopen.
-+ if test "$pass" = dlpreopen; then
-+ if test -z "$libdir" && test "$linkmode" = prog; then
-+ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
-+ fi
-+ # Prefer using a static library (so that no silly _DYNAMIC symbols
-+ # are required to link).
-+ if test -n "$old_library"; then
-+ newdlprefiles="$newdlprefiles $dir/$old_library"
-+ # Keep a list of preopened convenience libraries to check
-+ # that they are being used correctly in the link pass.
-+ test -z "$libdir" && \
-+ dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
-+ # Otherwise, use the dlname, so that lt_dlopen finds it.
-+ elif test -n "$dlname"; then
-+ newdlprefiles="$newdlprefiles $dir/$dlname"
-+ else
-+ newdlprefiles="$newdlprefiles $dir/$linklib"
-+ fi
-+ fi # $pass = dlpreopen
-+
-+ if test -z "$libdir"; then
-+ # Link the convenience library
-+ if test "$linkmode" = lib; then
-+ deplibs="$dir/$old_library $deplibs"
-+ elif test "$linkmode,$pass" = "prog,link"; then
-+ compile_deplibs="$dir/$old_library $compile_deplibs"
-+ finalize_deplibs="$dir/$old_library $finalize_deplibs"
-+ else
-+ deplibs="$lib $deplibs" # used for prog,scan pass
-+ fi
-+ continue
-+ fi
-+
-+
-+ if test "$linkmode" = prog && test "$pass" != link; then
-+ newlib_search_path="$newlib_search_path $ladir"
-+ deplibs="$lib $deplibs"
-+
-+ linkalldeplibs=no
-+ if test "$link_all_deplibs" != no || test -z "$library_names" ||
-+ test "$build_libtool_libs" = no; then
-+ linkalldeplibs=yes
-+ fi
-+
-+ tmp_libs=
-+ for deplib in $dependency_libs; do
-+ case $deplib in
-+ -L*) func_stripname '-L' '' "$deplib"
-+ newlib_search_path="$newlib_search_path $func_stripname_result"
-+ ;;
-+ esac
-+ # Need to link against all dependency_libs?
-+ if test "$linkalldeplibs" = yes; then
-+ deplibs="$deplib $deplibs"
-+ else
-+ # Need to hardcode shared library paths
-+ # or/and link against static libraries
-+ newdependency_libs="$deplib $newdependency_libs"
-+ fi
-+ if $opt_duplicate_deps ; then
-+ case "$tmp_libs " in
-+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ esac
-+ fi
-+ tmp_libs="$tmp_libs $deplib"
-+ done # for deplib
-+ continue
-+ fi # $linkmode = prog...
-+
-+ if test "$linkmode,$pass" = "prog,link"; then
-+ if test -n "$library_names" &&
-+ { { test "$prefer_static_libs" = no ||
-+ test "$prefer_static_libs,$installed" = "built,yes"; } ||
-+ test -z "$old_library"; }; then
-+ # We need to hardcode the library path
-+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
-+ # Make sure the rpath contains only unique directories.
-+ case "$temp_rpath:" in
-+ *"$absdir:"*) ;;
-+ *) temp_rpath="$temp_rpath$absdir:" ;;
-+ esac
-+ fi
-+
-+ # Hardcode the library path.
-+ # Skip directories that are in the system default run-time
-+ # search path.
-+ case " $sys_lib_dlsearch_path " in
-+ *" $absdir "*) ;;
-+ *)
-+ case "$compile_rpath " in
-+ *" $absdir "*) ;;
-+ *) compile_rpath="$compile_rpath $absdir"
-+ esac
-+ ;;
-+ esac
-+ case " $sys_lib_dlsearch_path " in
-+ *" $libdir "*) ;;
-+ *)
-+ case "$finalize_rpath " in
-+ *" $libdir "*) ;;
-+ *) finalize_rpath="$finalize_rpath $libdir"
-+ esac
-+ ;;
-+ esac
-+ fi # $linkmode,$pass = prog,link...
-+
-+ if test "$alldeplibs" = yes &&
-+ { test "$deplibs_check_method" = pass_all ||
-+ { test "$build_libtool_libs" = yes &&
-+ test -n "$library_names"; }; }; then
-+ # We only need to search for static libraries
-+ continue
-+ fi
-+ fi
-+
-+ link_static=no # Whether the deplib will be linked statically
-+ use_static_libs=$prefer_static_libs
-+ if test "$use_static_libs" = built && test "$installed" = yes; then
-+ use_static_libs=no
-+ fi
-+ if test -n "$library_names" &&
-+ { test "$use_static_libs" = no || test -z "$old_library"; }; then
-+ case $host in
-+ *cygwin* | *mingw* | *cegcc*)
-+ # No point in relinking DLLs because paths are not encoded
-+ notinst_deplibs="$notinst_deplibs $lib"
-+ need_relink=no
-+ ;;
-+ *)
-+ if test "$installed" = no; then
-+ notinst_deplibs="$notinst_deplibs $lib"
-+ need_relink=yes
-+ fi
-+ ;;
-+ esac
-+ # This is a shared library
-+
-+ # Warn about portability, can't link against -module's on some
-+ # systems (darwin). Don't bleat about dlopened modules though!
-+ dlopenmodule=""
-+ for dlpremoduletest in $dlprefiles; do
-+ if test "X$dlpremoduletest" = "X$lib"; then
-+ dlopenmodule="$dlpremoduletest"
-+ break
-+ fi
-+ done
-+ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
-+ $ECHO
-+ if test "$linkmode" = prog; then
-+ $ECHO "*** Warning: Linking the executable $output against the loadable module"
-+ else
-+ $ECHO "*** Warning: Linking the shared library $output against the loadable module"
-+ fi
-+ $ECHO "*** $linklib is not portable!"
-+ fi
-+ if test "$linkmode" = lib &&
-+ test "$hardcode_into_libs" = yes; then
-+ # Hardcode the library path.
-+ # Skip directories that are in the system default run-time
-+ # search path.
-+ case " $sys_lib_dlsearch_path " in
-+ *" $absdir "*) ;;
-+ *)
-+ case "$compile_rpath " in
-+ *" $absdir "*) ;;
-+ *) compile_rpath="$compile_rpath $absdir"
-+ esac
-+ ;;
-+ esac
-+ case " $sys_lib_dlsearch_path " in
-+ *" $libdir "*) ;;
-+ *)
-+ case "$finalize_rpath " in
-+ *" $libdir "*) ;;
-+ *) finalize_rpath="$finalize_rpath $libdir"
-+ esac
-+ ;;
-+ esac
-+ fi
-+
-+ if test -n "$old_archive_from_expsyms_cmds"; then
-+ # figure out the soname
-+ set dummy $library_names
-+ shift
-+ realname="$1"
-+ shift
-+ libname=`eval "\\$ECHO \"$libname_spec\""`
-+ # use dlname if we got it. it's perfectly good, no?
-+ if test -n "$dlname"; then
-+ soname="$dlname"
-+ elif test -n "$soname_spec"; then
-+ # bleh windows
-+ case $host in
-+ *cygwin* | mingw* | *cegcc*)
-+ func_arith $current - $age
-+ major=$func_arith_result
-+ versuffix="-$major"
-+ ;;
-+ esac
-+ eval soname=\"$soname_spec\"
-+ else
-+ soname="$realname"
-+ fi
-+
-+ # Make a new name for the extract_expsyms_cmds to use
-+ soroot="$soname"
-+ func_basename "$soroot"
-+ soname="$func_basename_result"
-+ func_stripname 'lib' '.dll' "$soname"
-+ newlib=libimp-$func_stripname_result.a
-+
-+ # If the library has no export list, then create one now
-+ if test -f "$output_objdir/$soname-def"; then :
-+ else
-+ func_verbose "extracting exported symbol list from \`$soname'"
-+ func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
-+ fi
-+
-+ # Create $newlib
-+ if test -f "$output_objdir/$newlib"; then :; else
-+ func_verbose "generating import library for \`$soname'"
-+ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
-+ fi
-+ # make sure the library variables are pointing to the new library
-+ dir=$output_objdir
-+ linklib=$newlib
-+ fi # test -n "$old_archive_from_expsyms_cmds"
-+
-+ if test "$linkmode" = prog || test "$mode" != relink; then
-+ add_shlibpath=
-+ add_dir=
-+ add=
-+ lib_linked=yes
-+ case $hardcode_action in
-+ immediate | unsupported)
-+ if test "$hardcode_direct" = no; then
-+ add="$dir/$linklib"
-+ case $host in
-+ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
-+ *-*-sysv4*uw2*) add_dir="-L$dir" ;;
-+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
-+ *-*-unixware7*) add_dir="-L$dir" ;;
-+ *-*-darwin* )
-+ # if the lib is a (non-dlopened) module then we can not
-+ # link against it, someone is ignoring the earlier warnings
-+ if /usr/bin/file -L $add 2> /dev/null |
-+ $GREP ": [^:]* bundle" >/dev/null ; then
-+ if test "X$dlopenmodule" != "X$lib"; then
-+ $ECHO "*** Warning: lib $linklib is a module, not a shared library"
-+ if test -z "$old_library" ; then
-+ $ECHO
-+ $ECHO "*** And there doesn't seem to be a static archive available"
-+ $ECHO "*** The link will probably fail, sorry"
-+ else
-+ add="$dir/$old_library"
-+ fi
-+ elif test -n "$old_library"; then
-+ add="$dir/$old_library"
-+ fi
-+ fi
-+ esac
-+ elif test "$hardcode_minus_L" = no; then
-+ case $host in
-+ *-*-sunos*) add_shlibpath="$dir" ;;
-+ esac
-+ add_dir="-L$dir"
-+ add="-l$name"
-+ elif test "$hardcode_shlibpath_var" = no; then
-+ add_shlibpath="$dir"
-+ add="-l$name"
-+ else
-+ lib_linked=no
-+ fi
-+ ;;
-+ relink)
-+ if test "$hardcode_direct" = yes &&
-+ test "$hardcode_direct_absolute" = no; then
-+ add="$dir/$linklib"
-+ elif test "$hardcode_minus_L" = yes; then
-+ add_dir="-L$dir"
-+ # Try looking first in the location we're being installed to.
-+ if test -n "$inst_prefix_dir"; then
-+ case $libdir in
-+ [\\/]*)
-+ add_dir="$add_dir -L$inst_prefix_dir$libdir"
-+ ;;
-+ esac
-+ fi
-+ add="-l$name"
-+ elif test "$hardcode_shlibpath_var" = yes; then
-+ add_shlibpath="$dir"
-+ add="-l$name"
-+ else
-+ lib_linked=no
-+ fi
-+ ;;
-+ *) lib_linked=no ;;
-+ esac
-+
-+ if test "$lib_linked" != yes; then
-+ func_fatal_configuration "unsupported hardcode properties"
-+ fi
-+
-+ if test -n "$add_shlibpath"; then
-+ case :$compile_shlibpath: in
-+ *":$add_shlibpath:"*) ;;
-+ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
-+ esac
-+ fi
-+ if test "$linkmode" = prog; then
-+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
-+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
-+ else
-+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
-+ test -n "$add" && deplibs="$add $deplibs"
-+ if test "$hardcode_direct" != yes &&
-+ test "$hardcode_minus_L" != yes &&
-+ test "$hardcode_shlibpath_var" = yes; then
-+ case :$finalize_shlibpath: in
-+ *":$libdir:"*) ;;
-+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-+ esac
-+ fi
-+ fi
-+ fi
-+
-+ if test "$linkmode" = prog || test "$mode" = relink; then
-+ add_shlibpath=
-+ add_dir=
-+ add=
-+ # Finalize command for both is simple: just hardcode it.
-+ if test "$hardcode_direct" = yes &&
-+ test "$hardcode_direct_absolute" = no; then
-+ add="$libdir/$linklib"
-+ elif test "$hardcode_minus_L" = yes; then
-+ add_dir="-L$libdir"
-+ add="-l$name"
-+ elif test "$hardcode_shlibpath_var" = yes; then
-+ case :$finalize_shlibpath: in
-+ *":$libdir:"*) ;;
-+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-+ esac
-+ add="-l$name"
-+ elif test "$hardcode_automatic" = yes; then
-+ if test -n "$inst_prefix_dir" &&
-+ test -f "$inst_prefix_dir$libdir/$linklib" ; then
-+ add="$inst_prefix_dir$libdir/$linklib"
-+ else
-+ add="$libdir/$linklib"
-+ fi
-+ else
-+ # We cannot seem to hardcode it, guess we'll fake it.
-+ add_dir="-L$libdir"
-+ # Try looking first in the location we're being installed to.
-+ if test -n "$inst_prefix_dir"; then
-+ case $libdir in
-+ [\\/]*)
-+ add_dir="$add_dir -L$inst_prefix_dir$libdir"
-+ ;;
-+ esac
-+ fi
-+ add="-l$name"
-+ fi
-+
-+ if test "$linkmode" = prog; then
-+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
-+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
-+ else
-+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
-+ test -n "$add" && deplibs="$add $deplibs"
-+ fi
-+ fi
-+ elif test "$linkmode" = prog; then
-+ # Here we assume that one of hardcode_direct or hardcode_minus_L
-+ # is not unsupported. This is valid on all known static and
-+ # shared platforms.
-+ if test "$hardcode_direct" != unsupported; then
-+ test -n "$old_library" && linklib="$old_library"
-+ compile_deplibs="$dir/$linklib $compile_deplibs"
-+ finalize_deplibs="$dir/$linklib $finalize_deplibs"
-+ else
-+ compile_deplibs="-l$name -L$dir $compile_deplibs"
-+ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
-+ fi
-+ elif test "$build_libtool_libs" = yes; then
-+ # Not a shared library
-+ if test "$deplibs_check_method" != pass_all; then
-+ # We're trying link a shared library against a static one
-+ # but the system doesn't support it.
-+
-+ # Just print a warning and add the library to dependency_libs so
-+ # that the program can be linked against the static library.
-+ $ECHO
-+ $ECHO "*** Warning: This system can not link to static lib archive $lib."
-+ $ECHO "*** I have the capability to make that library automatically link in when"
-+ $ECHO "*** you link to this library. But I can only do this if you have a"
-+ $ECHO "*** shared version of the library, which you do not appear to have."
-+ if test "$module" = yes; then
-+ $ECHO "*** But as you try to build a module library, libtool will still create "
-+ $ECHO "*** a static module, that should work as long as the dlopening application"
-+ $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
-+ if test -z "$global_symbol_pipe"; then
-+ $ECHO
-+ $ECHO "*** However, this would only work if libtool was able to extract symbol"
-+ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
-+ $ECHO "*** not find such a program. So, this module is probably useless."
-+ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
-+ fi
-+ if test "$build_old_libs" = no; then
-+ build_libtool_libs=module
-+ build_old_libs=yes
-+ else
-+ build_libtool_libs=no
-+ fi
-+ fi
-+ else
-+ deplibs="$dir/$old_library $deplibs"
-+ link_static=yes
-+ fi
-+ fi # link shared/static library?
-+
-+ if test "$linkmode" = lib; then
-+ if test -n "$dependency_libs" &&
-+ { test "$hardcode_into_libs" != yes ||
-+ test "$build_old_libs" = yes ||
-+ test "$link_static" = yes; }; then
-+ # Extract -R from dependency_libs
-+ temp_deplibs=
-+ for libdir in $dependency_libs; do
-+ case $libdir in
-+ -R*) func_stripname '-R' '' "$libdir"
-+ temp_xrpath=$func_stripname_result
-+ case " $xrpath " in
-+ *" $temp_xrpath "*) ;;
-+ *) xrpath="$xrpath $temp_xrpath";;
-+ esac;;
-+ *) temp_deplibs="$temp_deplibs $libdir";;
-+ esac
-+ done
-+ dependency_libs="$temp_deplibs"
-+ fi
-+
-+ newlib_search_path="$newlib_search_path $absdir"
-+ # Link against this library
-+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
-+ # ... and its dependency_libs
-+ tmp_libs=
-+ for deplib in $dependency_libs; do
-+ newdependency_libs="$deplib $newdependency_libs"
-+ if $opt_duplicate_deps ; then
-+ case "$tmp_libs " in
-+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ esac
-+ fi
-+ tmp_libs="$tmp_libs $deplib"
-+ done
-+
-+ if test "$link_all_deplibs" != no; then
-+ # Add the search paths of all dependency libraries
-+ for deplib in $dependency_libs; do
-+ path=
-+ case $deplib in
-+ -L*) path="$deplib" ;;
-+ *.la)
-+ func_dirname "$deplib" "" "."
-+ dir="$func_dirname_result"
-+ # We need an absolute path.
-+ case $dir in
-+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
-+ *)
-+ absdir=`cd "$dir" && pwd`
-+ if test -z "$absdir"; then
-+ func_warning "cannot determine absolute directory name of \`$dir'"
-+ absdir="$dir"
-+ fi
-+ ;;
-+ esac
-+ if $GREP "^installed=no" $deplib > /dev/null; then
-+ case $host in
-+ *-*-darwin*)
-+ depdepl=
-+ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
-+ if test -n "$deplibrary_names" ; then
-+ for tmp in $deplibrary_names ; do
-+ depdepl=$tmp
-+ done
-+ if test -f "$absdir/$objdir/$depdepl" ; then
-+ depdepl="$absdir/$objdir/$depdepl"
-+ darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
-+ if test -z "$darwin_install_name"; then
-+ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
-+ fi
-+ compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
-+ linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
-+ path=
-+ fi
-+ fi
-+ ;;
-+ *)
-+ path="-L$absdir/$objdir"
-+ ;;
-+ esac
-+ else
-+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-+ test -z "$libdir" && \
-+ func_fatal_error "\`$deplib' is not a valid libtool archive"
-+ test "$absdir" != "$libdir" && \
-+ func_warning "\`$deplib' seems to be moved"
-+
-+ path="-L$absdir"
-+ fi
-+ ;;
-+ esac
-+ case " $deplibs " in
-+ *" $path "*) ;;
-+ *) deplibs="$path $deplibs" ;;
-+ esac
-+ done
-+ fi # link_all_deplibs != no
-+ fi # linkmode = lib
-+ done # for deplib in $libs
-+ if test "$pass" = link; then
-+ if test "$linkmode" = "prog"; then
-+ compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
-+ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
-+ else
-+ compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-+ fi
-+ fi
-+ dependency_libs="$newdependency_libs"
-+ if test "$pass" = dlpreopen; then
-+ # Link the dlpreopened libraries before other libraries
-+ for deplib in $save_deplibs; do
-+ deplibs="$deplib $deplibs"
-+ done
-+ fi
-+ if test "$pass" != dlopen; then
-+ if test "$pass" != conv; then
-+ # Make sure lib_search_path contains only unique directories.
-+ lib_search_path=
-+ for dir in $newlib_search_path; do
-+ case "$lib_search_path " in
-+ *" $dir "*) ;;
-+ *) lib_search_path="$lib_search_path $dir" ;;
-+ esac
-+ done
-+ newlib_search_path=
-+ fi
-+
-+ if test "$linkmode,$pass" != "prog,link"; then
-+ vars="deplibs"
-+ else
-+ vars="compile_deplibs finalize_deplibs"
-+ fi
-+ for var in $vars dependency_libs; do
-+ # Add libraries to $var in reverse order
-+ eval tmp_libs=\"\$$var\"
-+ new_libs=
-+ for deplib in $tmp_libs; do
-+ # FIXME: Pedantically, this is the right thing to do, so
-+ # that some nasty dependency loop isn't accidentally
-+ # broken:
-+ #new_libs="$deplib $new_libs"
-+ # Pragmatically, this seems to cause very few problems in
-+ # practice:
-+ case $deplib in
-+ -L*) new_libs="$deplib $new_libs" ;;
-+ -R*) ;;
-+ *)
-+ # And here is the reason: when a library appears more
-+ # than once as an explicit dependence of a library, or
-+ # is implicitly linked in more than once by the
-+ # compiler, it is considered special, and multiple
-+ # occurrences thereof are not removed. Compare this
-+ # with having the same library being listed as a
-+ # dependency of multiple other libraries: in this case,
-+ # we know (pedantically, we assume) the library does not
-+ # need to be listed more than once, so we keep only the
-+ # last copy. This is not always right, but it is rare
-+ # enough that we require users that really mean to play
-+ # such unportable linking tricks to link the library
-+ # using -Wl,-lname, so that libtool does not consider it
-+ # for duplicate removal.
-+ case " $specialdeplibs " in
-+ *" $deplib "*) new_libs="$deplib $new_libs" ;;
-+ *)
-+ case " $new_libs " in
-+ *" $deplib "*) ;;
-+ *) new_libs="$deplib $new_libs" ;;
-+ esac
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ done
-+ tmp_libs=
-+ for deplib in $new_libs; do
-+ case $deplib in
-+ -L*)
-+ case " $tmp_libs " in
-+ *" $deplib "*) ;;
-+ *) tmp_libs="$tmp_libs $deplib" ;;
-+ esac
-+ ;;
-+ *) tmp_libs="$tmp_libs $deplib" ;;
-+ esac
-+ done
-+ eval $var=\"$tmp_libs\"
-+ done # for var
-+ fi
-+ # Last step: remove runtime libs from dependency_libs
-+ # (they stay in deplibs)
-+ tmp_libs=
-+ for i in $dependency_libs ; do
-+ case " $predeps $postdeps $compiler_lib_search_path " in
-+ *" $i "*)
-+ i=""
-+ ;;
-+ esac
-+ if test -n "$i" ; then
-+ tmp_libs="$tmp_libs $i"
-+ fi
-+ done
-+ dependency_libs=$tmp_libs
-+ done # for pass
-+ if test "$linkmode" = prog; then
-+ dlfiles="$newdlfiles"
-+ fi
-+ if test "$linkmode" = prog || test "$linkmode" = lib; then
-+ dlprefiles="$newdlprefiles"
-+ fi
-+
-+ case $linkmode in
-+ oldlib)
-+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-+ func_warning "\`-dlopen' is ignored for archives"
-+ fi
-+
-+ case " $deplibs" in
-+ *\ -l* | *\ -L*)
-+ func_warning "\`-l' and \`-L' are ignored for archives" ;;
-+ esac
-+
-+ test -n "$rpath" && \
-+ func_warning "\`-rpath' is ignored for archives"
-+
-+ test -n "$xrpath" && \
-+ func_warning "\`-R' is ignored for archives"
-+
-+ test -n "$vinfo" && \
-+ func_warning "\`-version-info/-version-number' is ignored for archives"
-+
-+ test -n "$release" && \
-+ func_warning "\`-release' is ignored for archives"
-+
-+ test -n "$export_symbols$export_symbols_regex" && \
-+ func_warning "\`-export-symbols' is ignored for archives"
-+
-+ # Now set the variables for building old libraries.
-+ build_libtool_libs=no
-+ oldlibs="$output"
-+ objs="$objs$old_deplibs"
-+ ;;
-+
-+ lib)
-+ # Make sure we only generate libraries of the form `libNAME.la'.
-+ case $outputname in
-+ lib*)
-+ func_stripname 'lib' '.la' "$outputname"
-+ name=$func_stripname_result
-+ eval shared_ext=\"$shrext_cmds\"
-+ eval libname=\"$libname_spec\"
-+ ;;
-+ *)
-+ test "$module" = no && \
-+ func_fatal_help "libtool library \`$output' must begin with \`lib'"
-+
-+ if test "$need_lib_prefix" != no; then
-+ # Add the "lib" prefix for modules if required
-+ func_stripname '' '.la' "$outputname"
-+ name=$func_stripname_result
-+ eval shared_ext=\"$shrext_cmds\"
-+ eval libname=\"$libname_spec\"
-+ else
-+ func_stripname '' '.la' "$outputname"
-+ libname=$func_stripname_result
-+ fi
-+ ;;
-+ esac
-+
-+ if test -n "$objs"; then
-+ if test "$deplibs_check_method" != pass_all; then
-+ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
-+ else
-+ $ECHO
-+ $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
-+ $ECHO "*** objects $objs is not portable!"
-+ libobjs="$libobjs $objs"
-+ fi
-+ fi
-+
-+ test "$dlself" != no && \
-+ func_warning "\`-dlopen self' is ignored for libtool libraries"
-+
-+ set dummy $rpath
-+ shift
-+ test "$#" -gt 1 && \
-+ func_warning "ignoring multiple \`-rpath's for a libtool library"
-+
-+ install_libdir="$1"
-+
-+ oldlibs=
-+ if test -z "$rpath"; then
-+ if test "$build_libtool_libs" = yes; then
-+ # Building a libtool convenience library.
-+ # Some compilers have problems with a `.al' extension so
-+ # convenience libraries should have the same extension an
-+ # archive normally would.
-+ oldlibs="$output_objdir/$libname.$libext $oldlibs"
-+ build_libtool_libs=convenience
-+ build_old_libs=yes
-+ fi
-+
-+ test -n "$vinfo" && \
-+ func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
-+
-+ test -n "$release" && \
-+ func_warning "\`-release' is ignored for convenience libraries"
-+ else
-+
-+ # Parse the version information argument.
-+ save_ifs="$IFS"; IFS=':'
-+ set dummy $vinfo 0 0 0
-+ shift
-+ IFS="$save_ifs"
-+
-+ test -n "$7" && \
-+ func_fatal_help "too many parameters to \`-version-info'"
-+
-+ # convert absolute version numbers to libtool ages
-+ # this retains compatibility with .la files and attempts
-+ # to make the code below a bit more comprehensible
-+
-+ case $vinfo_number in
-+ yes)
-+ number_major="$1"
-+ number_minor="$2"
-+ number_revision="$3"
-+ #
-+ # There are really only two kinds -- those that
-+ # use the current revision as the major version
-+ # and those that subtract age and use age as
-+ # a minor version. But, then there is irix
-+ # which has an extra 1 added just for fun
-+ #
-+ case $version_type in
-+ darwin|linux|osf|windows|none)
-+ func_arith $number_major + $number_minor
-+ current=$func_arith_result
-+ age="$number_minor"
-+ revision="$number_revision"
-+ ;;
-+ freebsd-aout|freebsd-elf|sunos)
-+ current="$number_major"
-+ revision="$number_minor"
-+ age="0"
-+ ;;
-+ irix|nonstopux)
-+ func_arith $number_major + $number_minor
-+ current=$func_arith_result
-+ age="$number_minor"
-+ revision="$number_minor"
-+ lt_irix_increment=no
-+ ;;
-+ *)
-+ func_fatal_configuration "$modename: unknown library version type \`$version_type'"
-+ ;;
-+ esac
-+ ;;
-+ no)
-+ current="$1"
-+ revision="$2"
-+ age="$3"
-+ ;;
-+ esac
-+
-+ # Check that each of the things are valid numbers.
-+ case $current in
-+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-+ *)
-+ func_error "CURRENT \`$current' must be a nonnegative integer"
-+ func_fatal_error "\`$vinfo' is not valid version information"
-+ ;;
-+ esac
-+
-+ case $revision in
-+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-+ *)
-+ func_error "REVISION \`$revision' must be a nonnegative integer"
-+ func_fatal_error "\`$vinfo' is not valid version information"
-+ ;;
-+ esac
-+
-+ case $age in
-+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-+ *)
-+ func_error "AGE \`$age' must be a nonnegative integer"
-+ func_fatal_error "\`$vinfo' is not valid version information"
-+ ;;
-+ esac
-+
-+ if test "$age" -gt "$current"; then
-+ func_error "AGE \`$age' is greater than the current interface number \`$current'"
-+ func_fatal_error "\`$vinfo' is not valid version information"
-+ fi
-+
-+ # Calculate the version variables.
-+ major=
-+ versuffix=
-+ verstring=
-+ case $version_type in
-+ none) ;;
-+
-+ darwin)
-+ # Like Linux, but with the current version available in
-+ # verstring for coding it into the library header
-+ func_arith $current - $age
-+ major=.$func_arith_result
-+ versuffix="$major.$age.$revision"
-+ # Darwin ld doesn't like 0 for these options...
-+ func_arith $current + 1
-+ minor_current=$func_arith_result
-+ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
-+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
-+ ;;
-+
-+ freebsd-aout)
-+ major=".$current"
-+ versuffix=".$current.$revision";
-+ ;;
-+
-+ freebsd-elf)
-+ major=".$current"
-+ versuffix=".$current"
-+ ;;
-+
-+ irix | nonstopux)
-+ if test "X$lt_irix_increment" = "Xno"; then
-+ func_arith $current - $age
-+ else
-+ func_arith $current - $age + 1
-+ fi
-+ major=$func_arith_result
-+
-+ case $version_type in
-+ nonstopux) verstring_prefix=nonstopux ;;
-+ *) verstring_prefix=sgi ;;
-+ esac
-+ verstring="$verstring_prefix$major.$revision"
-+
-+ # Add in all the interfaces that we are compatible with.
-+ loop=$revision
-+ while test "$loop" -ne 0; do
-+ func_arith $revision - $loop
-+ iface=$func_arith_result
-+ func_arith $loop - 1
-+ loop=$func_arith_result
-+ verstring="$verstring_prefix$major.$iface:$verstring"
-+ done
-+
-+ # Before this point, $major must not contain `.'.
-+ major=.$major
-+ versuffix="$major.$revision"
-+ ;;
-+
-+ linux)
-+ func_arith $current - $age
-+ major=.$func_arith_result
-+ versuffix="$major.$age.$revision"
-+ ;;
-+
-+ osf)
-+ func_arith $current - $age
-+ major=.$func_arith_result
-+ versuffix=".$current.$age.$revision"
-+ verstring="$current.$age.$revision"
-+
-+ # Add in all the interfaces that we are compatible with.
-+ loop=$age
-+ while test "$loop" -ne 0; do
-+ func_arith $current - $loop
-+ iface=$func_arith_result
-+ func_arith $loop - 1
-+ loop=$func_arith_result
-+ verstring="$verstring:${iface}.0"
-+ done
-+
-+ # Make executables depend on our current version.
-+ verstring="$verstring:${current}.0"
-+ ;;
-+
-+ qnx)
-+ major=".$current"
-+ versuffix=".$current"
-+ ;;
-+
-+ sunos)
-+ major=".$current"
-+ versuffix=".$current.$revision"
-+ ;;
-+
-+ windows)
-+ # Use '-' rather than '.', since we only want one
-+ # extension on DOS 8.3 filesystems.
-+ func_arith $current - $age
-+ major=$func_arith_result
-+ versuffix="-$major"
-+ ;;
-+
-+ *)
-+ func_fatal_configuration "unknown library version type \`$version_type'"
-+ ;;
-+ esac
-+
-+ # Clear the version info if we defaulted, and they specified a release.
-+ if test -z "$vinfo" && test -n "$release"; then
-+ major=
-+ case $version_type in
-+ darwin)
-+ # we can't check for "0.0" in archive_cmds due to quoting
-+ # problems, so we reset it completely
-+ verstring=
-+ ;;
-+ *)
-+ verstring="0.0"
-+ ;;
-+ esac
-+ if test "$need_version" = no; then
-+ versuffix=
-+ else
-+ versuffix=".0.0"
-+ fi
-+ fi
-+
-+ # Remove version info from name if versioning should be avoided
-+ if test "$avoid_version" = yes && test "$need_version" = no; then
-+ major=
-+ versuffix=
-+ verstring=""
-+ fi
-+
-+ # Check to see if the archive will have undefined symbols.
-+ if test "$allow_undefined" = yes; then
-+ if test "$allow_undefined_flag" = unsupported; then
-+ func_warning "undefined symbols not allowed in $host shared libraries"
-+ build_libtool_libs=no
-+ build_old_libs=yes
-+ fi
-+ else
-+ # Don't allow undefined symbols.
-+ allow_undefined_flag="$no_undefined_flag"
-+ fi
-+
-+ fi
-+
-+ func_generate_dlsyms "$libname" "$libname" "yes"
-+ libobjs="$libobjs $symfileobj"
-+ test "X$libobjs" = "X " && libobjs=
-+
-+ if test "$mode" != relink; then
-+ # Remove our outputs, but don't remove object files since they
-+ # may have been created when compiling PIC objects.
-+ removelist=
-+ tempremovelist=`$ECHO "$output_objdir/*"`
-+ for p in $tempremovelist; do
-+ case $p in
-+ *.$objext | *.gcno)
-+ ;;
-+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
-+ if test "X$precious_files_regex" != "X"; then
-+ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
-+ then
-+ continue
-+ fi
-+ fi
-+ removelist="$removelist $p"
-+ ;;
-+ *) ;;
-+ esac
-+ done
-+ test -n "$removelist" && \
-+ func_show_eval "${RM}r \$removelist"
-+ fi
-+
-+ # Now set the variables for building old libraries.
-+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
-+ oldlibs="$oldlibs $output_objdir/$libname.$libext"
-+
-+ # Transform .lo files to .o files.
-+ oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
-+ fi
-+
-+ # Eliminate all temporary directories.
-+ #for path in $notinst_path; do
-+ # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
-+ # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
-+ # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
-+ #done
-+
-+ if test -n "$xrpath"; then
-+ # If the user specified any rpath flags, then add them.
-+ temp_xrpath=
-+ for libdir in $xrpath; do
-+ temp_xrpath="$temp_xrpath -R$libdir"
-+ case "$finalize_rpath " in
-+ *" $libdir "*) ;;
-+ *) finalize_rpath="$finalize_rpath $libdir" ;;
-+ esac
-+ done
-+ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
-+ dependency_libs="$temp_xrpath $dependency_libs"
-+ fi
-+ fi
-+
-+ # Make sure dlfiles contains only unique files that won't be dlpreopened
-+ old_dlfiles="$dlfiles"
-+ dlfiles=
-+ for lib in $old_dlfiles; do
-+ case " $dlprefiles $dlfiles " in
-+ *" $lib "*) ;;
-+ *) dlfiles="$dlfiles $lib" ;;
-+ esac
-+ done
-+
-+ # Make sure dlprefiles contains only unique files
-+ old_dlprefiles="$dlprefiles"
-+ dlprefiles=
-+ for lib in $old_dlprefiles; do
-+ case "$dlprefiles " in
-+ *" $lib "*) ;;
-+ *) dlprefiles="$dlprefiles $lib" ;;
-+ esac
-+ done
-+
-+ if test "$build_libtool_libs" = yes; then
-+ if test -n "$rpath"; then
-+ case $host in
-+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
-+ # these systems don't actually have a c library (as such)!
-+ ;;
-+ *-*-rhapsody* | *-*-darwin1.[012])
-+ # Rhapsody C library is in the System framework
-+ deplibs="$deplibs System.ltframework"
-+ ;;
-+ *-*-netbsd*)
-+ # Don't link with libc until the a.out ld.so is fixed.
-+ ;;
-+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-+ # Do not include libc due to us having libc/libc_r.
-+ ;;
-+ *-*-sco3.2v5* | *-*-sco5v6*)
-+ # Causes problems with __ctype
-+ ;;
-+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
-+ # Compiler inserts libc in the correct place for threads to work
-+ ;;
-+ *)
-+ # Add libc to deplibs on all other systems if necessary.
-+ if test "$build_libtool_need_lc" = "yes"; then
-+ deplibs="$deplibs -lc"
-+ fi
-+ ;;
-+ esac
-+ fi
-+
-+ # Transform deplibs into only deplibs that can be linked in shared.
-+ name_save=$name
-+ libname_save=$libname
-+ release_save=$release
-+ versuffix_save=$versuffix
-+ major_save=$major
-+ # I'm not sure if I'm treating the release correctly. I think
-+ # release should show up in the -l (ie -lgmp5) so we don't want to
-+ # add it in twice. Is that correct?
-+ release=""
-+ versuffix=""
-+ major=""
-+ newdeplibs=
-+ droppeddeps=no
-+ case $deplibs_check_method in
-+ pass_all)
-+ # Don't check for shared/static. Everything works.
-+ # This might be a little naive. We might want to check
-+ # whether the library exists or not. But this is on
-+ # osf3 & osf4 and I'm not really sure... Just
-+ # implementing what was already the behavior.
-+ newdeplibs=$deplibs
-+ ;;
-+ test_compile)
-+ # This code stresses the "libraries are programs" paradigm to its
-+ # limits. Maybe even breaks it. We compile a program, linking it
-+ # against the deplibs as a proxy for the library. Then we can check
-+ # whether they linked in statically or dynamically with ldd.
-+ $opt_dry_run || $RM conftest.c
-+ cat > conftest.c <<EOF
-+ int main() { return 0; }
-+EOF
-+ $opt_dry_run || $RM conftest
-+ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
-+ ldd_output=`ldd conftest`
-+ for i in $deplibs; do
-+ case $i in
-+ -l*)
-+ func_stripname -l '' "$i"
-+ name=$func_stripname_result
-+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-+ case " $predeps $postdeps " in
-+ *" $i "*)
-+ newdeplibs="$newdeplibs $i"
-+ i=""
-+ ;;
-+ esac
-+ fi
-+ if test -n "$i" ; then
-+ libname=`eval "\\$ECHO \"$libname_spec\""`
-+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
-+ set dummy $deplib_matches; shift
-+ deplib_match=$1
-+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-+ newdeplibs="$newdeplibs $i"
-+ else
-+ droppeddeps=yes
-+ $ECHO
-+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-+ $ECHO "*** I have the capability to make that library automatically link in when"
-+ $ECHO "*** you link to this library. But I can only do this if you have a"
-+ $ECHO "*** shared version of the library, which I believe you do not have"
-+ $ECHO "*** because a test_compile did reveal that the linker did not use it for"
-+ $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
-+ fi
-+ fi
-+ ;;
-+ *)
-+ newdeplibs="$newdeplibs $i"
-+ ;;
-+ esac
-+ done
-+ else
-+ # Error occurred in the first compile. Let's try to salvage
-+ # the situation: Compile a separate program for each library.
-+ for i in $deplibs; do
-+ case $i in
-+ -l*)
-+ func_stripname -l '' "$i"
-+ name=$func_stripname_result
-+ $opt_dry_run || $RM conftest
-+ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
-+ ldd_output=`ldd conftest`
-+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-+ case " $predeps $postdeps " in
-+ *" $i "*)
-+ newdeplibs="$newdeplibs $i"
-+ i=""
-+ ;;
-+ esac
-+ fi
-+ if test -n "$i" ; then
-+ libname=`eval "\\$ECHO \"$libname_spec\""`
-+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
-+ set dummy $deplib_matches; shift
-+ deplib_match=$1
-+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-+ newdeplibs="$newdeplibs $i"
-+ else
-+ droppeddeps=yes
-+ $ECHO
-+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-+ $ECHO "*** I have the capability to make that library automatically link in when"
-+ $ECHO "*** you link to this library. But I can only do this if you have a"
-+ $ECHO "*** shared version of the library, which you do not appear to have"
-+ $ECHO "*** because a test_compile did reveal that the linker did not use this one"
-+ $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
-+ fi
-+ fi
-+ else
-+ droppeddeps=yes
-+ $ECHO
-+ $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
-+ $ECHO "*** make it link in! You will probably need to install it or some"
-+ $ECHO "*** library that it depends on before this library will be fully"
-+ $ECHO "*** functional. Installing it before continuing would be even better."
-+ fi
-+ ;;
-+ *)
-+ newdeplibs="$newdeplibs $i"
-+ ;;
-+ esac
-+ done
-+ fi
-+ ;;
-+ file_magic*)
-+ set dummy $deplibs_check_method; shift
-+ file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-+ for a_deplib in $deplibs; do
-+ case $a_deplib in
-+ -l*)
-+ func_stripname -l '' "$a_deplib"
-+ name=$func_stripname_result
-+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-+ case " $predeps $postdeps " in
-+ *" $a_deplib "*)
-+ newdeplibs="$newdeplibs $a_deplib"
-+ a_deplib=""
-+ ;;
-+ esac
-+ fi
-+ if test -n "$a_deplib" ; then
-+ libname=`eval "\\$ECHO \"$libname_spec\""`
-+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-+ for potent_lib in $potential_libs; do
-+ # Follow soft links.
-+ if ls -lLd "$potent_lib" 2>/dev/null |
-+ $GREP " -> " >/dev/null; then
-+ continue
-+ fi
-+ # The statement above tries to avoid entering an
-+ # endless loop below, in case of cyclic links.
-+ # We might still enter an endless loop, since a link
-+ # loop can be closed while we follow links,
-+ # but so what?
-+ potlib="$potent_lib"
-+ while test -h "$potlib" 2>/dev/null; do
-+ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
-+ case $potliblink in
-+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-+ *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
-+ esac
-+ done
-+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
-+ $SED -e 10q |
-+ $EGREP "$file_magic_regex" > /dev/null; then
-+ newdeplibs="$newdeplibs $a_deplib"
-+ a_deplib=""
-+ break 2
-+ fi
-+ done
-+ done
-+ fi
-+ if test -n "$a_deplib" ; then
-+ droppeddeps=yes
-+ $ECHO
-+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-+ $ECHO "*** I have the capability to make that library automatically link in when"
-+ $ECHO "*** you link to this library. But I can only do this if you have a"
-+ $ECHO "*** shared version of the library, which you do not appear to have"
-+ $ECHO "*** because I did check the linker path looking for a file starting"
-+ if test -z "$potlib" ; then
-+ $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
-+ else
-+ $ECHO "*** with $libname and none of the candidates passed a file format test"
-+ $ECHO "*** using a file magic. Last file checked: $potlib"
-+ fi
-+ fi
-+ ;;
-+ *)
-+ # Add a -L argument.
-+ newdeplibs="$newdeplibs $a_deplib"
-+ ;;
-+ esac
-+ done # Gone through all deplibs.
-+ ;;
-+ match_pattern*)
-+ set dummy $deplibs_check_method; shift
-+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-+ for a_deplib in $deplibs; do
-+ case $a_deplib in
-+ -l*)
-+ func_stripname -l '' "$a_deplib"
-+ name=$func_stripname_result
-+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-+ case " $predeps $postdeps " in
-+ *" $a_deplib "*)
-+ newdeplibs="$newdeplibs $a_deplib"
-+ a_deplib=""
-+ ;;
-+ esac
-+ fi
-+ if test -n "$a_deplib" ; then
-+ libname=`eval "\\$ECHO \"$libname_spec\""`
-+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-+ for potent_lib in $potential_libs; do
-+ potlib="$potent_lib" # see symlink-check above in file_magic test
-+ if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
-+ $EGREP "$match_pattern_regex" > /dev/null; then
-+ newdeplibs="$newdeplibs $a_deplib"
-+ a_deplib=""
-+ break 2
-+ fi
-+ done
-+ done
-+ fi
-+ if test -n "$a_deplib" ; then
-+ droppeddeps=yes
-+ $ECHO
-+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-+ $ECHO "*** I have the capability to make that library automatically link in when"
-+ $ECHO "*** you link to this library. But I can only do this if you have a"
-+ $ECHO "*** shared version of the library, which you do not appear to have"
-+ $ECHO "*** because I did check the linker path looking for a file starting"
-+ if test -z "$potlib" ; then
-+ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
-+ else
-+ $ECHO "*** with $libname and none of the candidates passed a file format test"
-+ $ECHO "*** using a regex pattern. Last file checked: $potlib"
-+ fi
-+ fi
-+ ;;
-+ *)
-+ # Add a -L argument.
-+ newdeplibs="$newdeplibs $a_deplib"
-+ ;;
-+ esac
-+ done # Gone through all deplibs.
-+ ;;
-+ none | unknown | *)
-+ newdeplibs=""
-+ tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
-+ -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
-+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-+ for i in $predeps $postdeps ; do
-+ # can't use Xsed below, because $i might contain '/'
-+ tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
-+ done
-+ fi
-+ if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' |
-+ $GREP . >/dev/null; then
-+ $ECHO
-+ if test "X$deplibs_check_method" = "Xnone"; then
-+ $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
-+ else
-+ $ECHO "*** Warning: inter-library dependencies are not known to be supported."
-+ fi
-+ $ECHO "*** All declared inter-library dependencies are being dropped."
-+ droppeddeps=yes
-+ fi
-+ ;;
-+ esac
-+ versuffix=$versuffix_save
-+ major=$major_save
-+ release=$release_save
-+ libname=$libname_save
-+ name=$name_save
-+
-+ case $host in
-+ *-*-rhapsody* | *-*-darwin1.[012])
-+ # On Rhapsody replace the C library with the System framework
-+ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
-+ ;;
-+ esac
-+
-+ if test "$droppeddeps" = yes; then
-+ if test "$module" = yes; then
-+ $ECHO
-+ $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
-+ $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
-+ $ECHO "*** a static module, that should work as long as the dlopening"
-+ $ECHO "*** application is linked with the -dlopen flag."
-+ if test -z "$global_symbol_pipe"; then
-+ $ECHO
-+ $ECHO "*** However, this would only work if libtool was able to extract symbol"
-+ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
-+ $ECHO "*** not find such a program. So, this module is probably useless."
-+ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
-+ fi
-+ if test "$build_old_libs" = no; then
-+ oldlibs="$output_objdir/$libname.$libext"
-+ build_libtool_libs=module
-+ build_old_libs=yes
-+ else
-+ build_libtool_libs=no
-+ fi
-+ else
-+ $ECHO "*** The inter-library dependencies that have been dropped here will be"
-+ $ECHO "*** automatically added whenever a program is linked with this library"
-+ $ECHO "*** or is declared to -dlopen it."
-+
-+ if test "$allow_undefined" = no; then
-+ $ECHO
-+ $ECHO "*** Since this library must not contain undefined symbols,"
-+ $ECHO "*** because either the platform does not support them or"
-+ $ECHO "*** it was explicitly requested with -no-undefined,"
-+ $ECHO "*** libtool will only create a static version of it."
-+ if test "$build_old_libs" = no; then
-+ oldlibs="$output_objdir/$libname.$libext"
-+ build_libtool_libs=module
-+ build_old_libs=yes
-+ else
-+ build_libtool_libs=no
-+ fi
-+ fi
-+ fi
-+ fi
-+ # Done checking deplibs!
-+ deplibs=$newdeplibs
-+ fi
-+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
-+ case $host in
-+ *-*-darwin*)
-+ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-+ new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-+ deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-+ ;;
-+ esac
-+
-+ # move library search paths that coincide with paths to not yet
-+ # installed libraries to the beginning of the library search list
-+ new_libs=
-+ for path in $notinst_path; do
-+ case " $new_libs " in
-+ *" -L$path/$objdir "*) ;;
-+ *)
-+ case " $deplibs " in
-+ *" -L$path/$objdir "*)
-+ new_libs="$new_libs -L$path/$objdir" ;;
-+ esac
-+ ;;
-+ esac
-+ done
-+ for deplib in $deplibs; do
-+ case $deplib in
-+ -L*)
-+ case " $new_libs " in
-+ *" $deplib "*) ;;
-+ *) new_libs="$new_libs $deplib" ;;
-+ esac
-+ ;;
-+ *) new_libs="$new_libs $deplib" ;;
-+ esac
-+ done
-+ deplibs="$new_libs"
-+
-+ # All the library-specific variables (install_libdir is set above).
-+ library_names=
-+ old_library=
-+ dlname=
-+
-+ # Test again, we may have decided not to build it any more
-+ if test "$build_libtool_libs" = yes; then
-+ if test "$hardcode_into_libs" = yes; then
-+ # Hardcode the library paths
-+ hardcode_libdirs=
-+ dep_rpath=
-+ rpath="$finalize_rpath"
-+ test "$mode" != relink && rpath="$compile_rpath$rpath"
-+ for libdir in $rpath; do
-+ if test -n "$hardcode_libdir_flag_spec"; then
-+ if test -n "$hardcode_libdir_separator"; then
-+ if test -z "$hardcode_libdirs"; then
-+ hardcode_libdirs="$libdir"
-+ else
-+ # Just accumulate the unique libdirs.
-+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-+ ;;
-+ *)
-+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-+ ;;
-+ esac
-+ fi
-+ else
-+ eval flag=\"$hardcode_libdir_flag_spec\"
-+ dep_rpath="$dep_rpath $flag"
-+ fi
-+ elif test -n "$runpath_var"; then
-+ case "$perm_rpath " in
-+ *" $libdir "*) ;;
-+ *) perm_rpath="$perm_rpath $libdir" ;;
-+ esac
-+ fi
-+ done
-+ # Substitute the hardcoded libdirs into the rpath.
-+ if test -n "$hardcode_libdir_separator" &&
-+ test -n "$hardcode_libdirs"; then
-+ libdir="$hardcode_libdirs"
-+ if test -n "$hardcode_libdir_flag_spec_ld"; then
-+ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
-+ else
-+ eval dep_rpath=\"$hardcode_libdir_flag_spec\"
-+ fi
-+ fi
-+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
-+ # We should set the runpath_var.
-+ rpath=
-+ for dir in $perm_rpath; do
-+ rpath="$rpath$dir:"
-+ done
-+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
-+ fi
-+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
-+ fi
-+
-+ shlibpath="$finalize_shlibpath"
-+ test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
-+ if test -n "$shlibpath"; then
-+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
-+ fi
-+
-+ # Get the real and link names of the library.
-+ eval shared_ext=\"$shrext_cmds\"
-+ eval library_names=\"$library_names_spec\"
-+ set dummy $library_names
-+ shift
-+ realname="$1"
-+ shift
-+
-+ if test -n "$soname_spec"; then
-+ eval soname=\"$soname_spec\"
-+ else
-+ soname="$realname"
-+ fi
-+ if test -z "$dlname"; then
-+ dlname=$soname
-+ fi
-+
-+ lib="$output_objdir/$realname"
-+ linknames=
-+ for link
-+ do
-+ linknames="$linknames $link"
-+ done
-+
-+ # Use standard objects if they are pic
-+ test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-+ test "X$libobjs" = "X " && libobjs=
-+
-+ delfiles=
-+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
-+ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
-+ export_symbols="$output_objdir/$libname.uexp"
-+ delfiles="$delfiles $export_symbols"
-+ fi
-+
-+ orig_export_symbols=
-+ case $host_os in
-+ cygwin* | mingw* | cegcc*)
-+ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
-+ # exporting using user supplied symfile
-+ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
-+ # and it's NOT already a .def file. Must figure out
-+ # which of the given symbols are data symbols and tag
-+ # them as such. So, trigger use of export_symbols_cmds.
-+ # export_symbols gets reassigned inside the "prepare
-+ # the list of exported symbols" if statement, so the
-+ # include_expsyms logic still works.
-+ orig_export_symbols="$export_symbols"
-+ export_symbols=
-+ always_export_symbols=yes
-+ fi
-+ fi
-+ ;;
-+ esac
-+
-+ # Prepare the list of exported symbols
-+ if test -z "$export_symbols"; then
-+ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-+ func_verbose "generating symbol list for \`$libname.la'"
-+ export_symbols="$output_objdir/$libname.exp"
-+ $opt_dry_run || $RM $export_symbols
-+ cmds=$export_symbols_cmds
-+ save_ifs="$IFS"; IFS='~'
-+ for cmd in $cmds; do
-+ IFS="$save_ifs"
-+ eval cmd=\"$cmd\"
-+ func_len " $cmd"
-+ len=$func_len_result
-+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-+ func_show_eval "$cmd" 'exit $?'
-+ skipped_export=false
-+ else
-+ # The command line is too long to execute in one step.
-+ func_verbose "using reloadable object file for export list..."
-+ skipped_export=:
-+ # Break out early, otherwise skipped_export may be
-+ # set to false by a later but shorter cmd.
-+ break
-+ fi
-+ done
-+ IFS="$save_ifs"
-+ if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
-+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
-+ fi
-+ fi
-+ fi
-+
-+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
-+ tmp_export_symbols="$export_symbols"
-+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-+ $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
-+ fi
-+
-+ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
-+ # The given exports_symbols file has to be filtered, so filter it.
-+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
-+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
-+ # 's' commands which not all seds can handle. GNU sed should be fine
-+ # though. Also, the filter scales superlinearly with the number of
-+ # global variables. join(1) would be nice here, but unfortunately
-+ # isn't a blessed tool.
-+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
-+ delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
-+ export_symbols=$output_objdir/$libname.def
-+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
-+ fi
-+
-+ tmp_deplibs=
-+ for test_deplib in $deplibs; do
-+ case " $convenience " in
-+ *" $test_deplib "*) ;;
-+ *)
-+ tmp_deplibs="$tmp_deplibs $test_deplib"
-+ ;;
-+ esac
-+ done
-+ deplibs="$tmp_deplibs"
-+
-+ if test -n "$convenience"; then
-+ if test -n "$whole_archive_flag_spec" &&
-+ test "$compiler_needs_object" = yes &&
-+ test -z "$libobjs"; then
-+ # extract the archives, so we have objects to list.
-+ # TODO: could optimize this to just extract one archive.
-+ whole_archive_flag_spec=
-+ fi
-+ if test -n "$whole_archive_flag_spec"; then
-+ save_libobjs=$libobjs
-+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-+ test "X$libobjs" = "X " && libobjs=
-+ else
-+ gentop="$output_objdir/${outputname}x"
-+ generated="$generated $gentop"
-+
-+ func_extract_archives $gentop $convenience
-+ libobjs="$libobjs $func_extract_archives_result"
-+ test "X$libobjs" = "X " && libobjs=
-+ fi
-+ fi
-+
-+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
-+ eval flag=\"$thread_safe_flag_spec\"
-+ linker_flags="$linker_flags $flag"
-+ fi
-+
-+ # Make a backup of the uninstalled library when relinking
-+ if test "$mode" = relink; then
-+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
-+ fi
-+
-+ # Do each of the archive commands.
-+ if test "$module" = yes && test -n "$module_cmds" ; then
-+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-+ eval test_cmds=\"$module_expsym_cmds\"
-+ cmds=$module_expsym_cmds
-+ else
-+ eval test_cmds=\"$module_cmds\"
-+ cmds=$module_cmds
-+ fi
-+ else
-+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-+ eval test_cmds=\"$archive_expsym_cmds\"
-+ cmds=$archive_expsym_cmds
-+ else
-+ eval test_cmds=\"$archive_cmds\"
-+ cmds=$archive_cmds
-+ fi
-+ fi
-+
-+ if test "X$skipped_export" != "X:" &&
-+ func_len " $test_cmds" &&
-+ len=$func_len_result &&
-+ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-+ :
-+ else
-+ # The command line is too long to link in one step, link piecewise
-+ # or, if using GNU ld and skipped_export is not :, use a linker
-+ # script.
-+
-+ # Save the value of $output and $libobjs because we want to
-+ # use them later. If we have whole_archive_flag_spec, we
-+ # want to use save_libobjs as it was before
-+ # whole_archive_flag_spec was expanded, because we can't
-+ # assume the linker understands whole_archive_flag_spec.
-+ # This may have to be revisited, in case too many
-+ # convenience libraries get linked in and end up exceeding
-+ # the spec.
-+ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
-+ save_libobjs=$libobjs
-+ fi
-+ save_output=$output
-+ output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
-+
-+ # Clear the reloadable object creation command queue and
-+ # initialize k to one.
-+ test_cmds=
-+ concat_cmds=
-+ objlist=
-+ last_robj=
-+ k=1
-+
-+ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
-+ output=${output_objdir}/${output_la}.lnkscript
-+ func_verbose "creating GNU ld script: $output"
-+ $ECHO 'INPUT (' > $output
-+ for obj in $save_libobjs
-+ do
-+ $ECHO "$obj" >> $output
-+ done
-+ $ECHO ')' >> $output
-+ delfiles="$delfiles $output"
-+ elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
-+ output=${output_objdir}/${output_la}.lnk
-+ func_verbose "creating linker input file list: $output"
-+ : > $output
-+ set x $save_libobjs
-+ shift
-+ firstobj=
-+ if test "$compiler_needs_object" = yes; then
-+ firstobj="$1 "
-+ shift
-+ fi
-+ for obj
-+ do
-+ $ECHO "$obj" >> $output
-+ done
-+ delfiles="$delfiles $output"
-+ output=$firstobj\"$file_list_spec$output\"
-+ else
-+ if test -n "$save_libobjs"; then
-+ func_verbose "creating reloadable object files..."
-+ output=$output_objdir/$output_la-${k}.$objext
-+ eval test_cmds=\"$reload_cmds\"
-+ func_len " $test_cmds"
-+ len0=$func_len_result
-+ len=$len0
-+
-+ # Loop over the list of objects to be linked.
-+ for obj in $save_libobjs
-+ do
-+ func_len " $obj"
-+ func_arith $len + $func_len_result
-+ len=$func_arith_result
-+ if test "X$objlist" = X ||
-+ test "$len" -lt "$max_cmd_len"; then
-+ func_append objlist " $obj"
-+ else
-+ # The command $test_cmds is almost too long, add a
-+ # command to the queue.
-+ if test "$k" -eq 1 ; then
-+ # The first file doesn't have a previous command to add.
-+ eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
-+ else
-+ # All subsequent reloadable object files will link in
-+ # the last one created.
-+ eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
-+ fi
-+ last_robj=$output_objdir/$output_la-${k}.$objext
-+ func_arith $k + 1
-+ k=$func_arith_result
-+ output=$output_objdir/$output_la-${k}.$objext
-+ objlist=$obj
-+ func_len " $last_robj"
-+ func_arith $len0 + $func_len_result
-+ len=$func_arith_result
-+ fi
-+ done
-+ # Handle the remaining objects by creating one last
-+ # reloadable object file. All subsequent reloadable object
-+ # files will link in the last one created.
-+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-+ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-+ if test -n "$last_robj"; then
-+ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
-+ fi
-+ delfiles="$delfiles $output"
-+
-+ else
-+ output=
-+ fi
-+
-+ if ${skipped_export-false}; then
-+ func_verbose "generating symbol list for \`$libname.la'"
-+ export_symbols="$output_objdir/$libname.exp"
-+ $opt_dry_run || $RM $export_symbols
-+ libobjs=$output
-+ # Append the command to create the export file.
-+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-+ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
-+ if test -n "$last_robj"; then
-+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
-+ fi
-+ fi
-+
-+ test -n "$save_libobjs" &&
-+ func_verbose "creating a temporary reloadable object file: $output"
-+
-+ # Loop through the commands generated above and execute them.
-+ save_ifs="$IFS"; IFS='~'
-+ for cmd in $concat_cmds; do
-+ IFS="$save_ifs"
-+ $opt_silent || {
-+ func_quote_for_expand "$cmd"
-+ eval "func_echo $func_quote_for_expand_result"
-+ }
-+ $opt_dry_run || eval "$cmd" || {
-+ lt_exit=$?
-+
-+ # Restore the uninstalled library and exit
-+ if test "$mode" = relink; then
-+ ( cd "$output_objdir" && \
-+ $RM "${realname}T" && \
-+ $MV "${realname}U" "$realname" )
-+ fi
-+
-+ exit $lt_exit
-+ }
-+ done
-+ IFS="$save_ifs"
-+
-+ if test -n "$export_symbols_regex" && ${skipped_export-false}; then
-+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
-+ fi
-+ fi
-+
-+ if ${skipped_export-false}; then
-+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
-+ tmp_export_symbols="$export_symbols"
-+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-+ $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
-+ fi
-+
-+ if test -n "$orig_export_symbols"; then
-+ # The given exports_symbols file has to be filtered, so filter it.
-+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
-+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
-+ # 's' commands which not all seds can handle. GNU sed should be fine
-+ # though. Also, the filter scales superlinearly with the number of
-+ # global variables. join(1) would be nice here, but unfortunately
-+ # isn't a blessed tool.
-+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
-+ delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
-+ export_symbols=$output_objdir/$libname.def
-+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
-+ fi
-+ fi
-+
-+ libobjs=$output
-+ # Restore the value of output.
-+ output=$save_output
-+
-+ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
-+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-+ test "X$libobjs" = "X " && libobjs=
-+ fi
-+ # Expand the library linking commands again to reset the
-+ # value of $libobjs for piecewise linking.
-+
-+ # Do each of the archive commands.
-+ if test "$module" = yes && test -n "$module_cmds" ; then
-+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-+ cmds=$module_expsym_cmds
-+ else
-+ cmds=$module_cmds
-+ fi
-+ else
-+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-+ cmds=$archive_expsym_cmds
-+ else
-+ cmds=$archive_cmds
-+ fi
-+ fi
-+ fi
-+
-+ if test -n "$delfiles"; then
-+ # Append the command to remove temporary files to $cmds.
-+ eval cmds=\"\$cmds~\$RM $delfiles\"
-+ fi
-+
-+ # Add any objects from preloaded convenience libraries
-+ if test -n "$dlprefiles"; then
-+ gentop="$output_objdir/${outputname}x"
-+ generated="$generated $gentop"
-+
-+ func_extract_archives $gentop $dlprefiles
-+ libobjs="$libobjs $func_extract_archives_result"
-+ test "X$libobjs" = "X " && libobjs=
-+ fi
-+
-+ save_ifs="$IFS"; IFS='~'
-+ for cmd in $cmds; do
-+ IFS="$save_ifs"
-+ eval cmd=\"$cmd\"
-+ $opt_silent || {
-+ func_quote_for_expand "$cmd"
-+ eval "func_echo $func_quote_for_expand_result"
-+ }
-+ $opt_dry_run || eval "$cmd" || {
-+ lt_exit=$?
-+
-+ # Restore the uninstalled library and exit
-+ if test "$mode" = relink; then
-+ ( cd "$output_objdir" && \
-+ $RM "${realname}T" && \
-+ $MV "${realname}U" "$realname" )
-+ fi
-+
-+ exit $lt_exit
-+ }
-+ done
-+ IFS="$save_ifs"
-+
-+ # Restore the uninstalled library and exit
-+ if test "$mode" = relink; then
-+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
-+
-+ if test -n "$convenience"; then
-+ if test -z "$whole_archive_flag_spec"; then
-+ func_show_eval '${RM}r "$gentop"'
-+ fi
-+ fi
-+
-+ exit $EXIT_SUCCESS
-+ fi
-+
-+ # Create links to the real library.
-+ for linkname in $linknames; do
-+ if test "$realname" != "$linkname"; then
-+ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
-+ fi
-+ done
-+
-+ # If -module or -export-dynamic was specified, set the dlname.
-+ if test "$module" = yes || test "$export_dynamic" = yes; then
-+ # On all known operating systems, these are identical.
-+ dlname="$soname"
-+ fi
-+ fi
-+ ;;
-+
-+ obj)
-+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-+ func_warning "\`-dlopen' is ignored for objects"
-+ fi
-+
-+ case " $deplibs" in
-+ *\ -l* | *\ -L*)
-+ func_warning "\`-l' and \`-L' are ignored for objects" ;;
-+ esac
-+
-+ test -n "$rpath" && \
-+ func_warning "\`-rpath' is ignored for objects"
-+
-+ test -n "$xrpath" && \
-+ func_warning "\`-R' is ignored for objects"
-+
-+ test -n "$vinfo" && \
-+ func_warning "\`-version-info' is ignored for objects"
-+
-+ test -n "$release" && \
-+ func_warning "\`-release' is ignored for objects"
-+
-+ case $output in
-+ *.lo)
-+ test -n "$objs$old_deplibs" && \
-+ func_fatal_error "cannot build library object \`$output' from non-libtool objects"
-+
-+ libobj=$output
-+ func_lo2o "$libobj"
-+ obj=$func_lo2o_result
-+ ;;
-+ *)
-+ libobj=
-+ obj="$output"
-+ ;;
-+ esac
-+
-+ # Delete the old objects.
-+ $opt_dry_run || $RM $obj $libobj
-+
-+ # Objects from convenience libraries. This assumes
-+ # single-version convenience libraries. Whenever we create
-+ # different ones for PIC/non-PIC, this we'll have to duplicate
-+ # the extraction.
-+ reload_conv_objs=
-+ gentop=
-+ # reload_cmds runs $LD directly, so let us get rid of
-+ # -Wl from whole_archive_flag_spec and hope we can get by with
-+ # turning comma into space..
-+ wl=
-+
-+ if test -n "$convenience"; then
-+ if test -n "$whole_archive_flag_spec"; then
-+ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-+ reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
-+ else
-+ gentop="$output_objdir/${obj}x"
-+ generated="$generated $gentop"
-+
-+ func_extract_archives $gentop $convenience
-+ reload_conv_objs="$reload_objs $func_extract_archives_result"
-+ fi
-+ fi
-+
-+ # Create the old-style object.
-+ reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-+
-+ output="$obj"
-+ func_execute_cmds "$reload_cmds" 'exit $?'
-+
-+ # Exit if we aren't doing a library object file.
-+ if test -z "$libobj"; then
-+ if test -n "$gentop"; then
-+ func_show_eval '${RM}r "$gentop"'
-+ fi
-+
-+ exit $EXIT_SUCCESS
-+ fi
-+
-+ if test "$build_libtool_libs" != yes; then
-+ if test -n "$gentop"; then
-+ func_show_eval '${RM}r "$gentop"'
-+ fi
-+
-+ # Create an invalid libtool object if no PIC, so that we don't
-+ # accidentally link it into a program.
-+ # $show "echo timestamp > $libobj"
-+ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
-+ exit $EXIT_SUCCESS
-+ fi
-+
-+ if test -n "$pic_flag" || test "$pic_mode" != default; then
-+ # Only do commands if we really have different PIC objects.
-+ reload_objs="$libobjs $reload_conv_objs"
-+ output="$libobj"
-+ func_execute_cmds "$reload_cmds" 'exit $?'
-+ fi
-+
-+ if test -n "$gentop"; then
-+ func_show_eval '${RM}r "$gentop"'
-+ fi
-+
-+ exit $EXIT_SUCCESS
-+ ;;
-+
-+ prog)
-+ case $host in
-+ *cygwin*) func_stripname '' '.exe' "$output"
-+ output=$func_stripname_result.exe;;
-+ esac
-+ test -n "$vinfo" && \
-+ func_warning "\`-version-info' is ignored for programs"
-+
-+ test -n "$release" && \
-+ func_warning "\`-release' is ignored for programs"
-+
-+ test "$preload" = yes \
-+ && test "$dlopen_support" = unknown \
-+ && test "$dlopen_self" = unknown \
-+ && test "$dlopen_self_static" = unknown && \
-+ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
-+
-+ case $host in
-+ *-*-rhapsody* | *-*-darwin1.[012])
-+ # On Rhapsody replace the C library is the System framework
-+ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
-+ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
-+ ;;
-+ esac
-+
-+ case $host in
-+ *-*-darwin*)
-+ # Don't allow lazy linking, it breaks C++ global constructors
-+ # But is supposedly fixed on 10.4 or later (yay!).
-+ if test "$tagname" = CXX ; then
-+ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
-+ 10.[0123])
-+ compile_command="$compile_command ${wl}-bind_at_load"
-+ finalize_command="$finalize_command ${wl}-bind_at_load"
-+ ;;
-+ esac
-+ fi
-+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
-+ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-+ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-+ ;;
-+ esac
-+
-+
-+ # move library search paths that coincide with paths to not yet
-+ # installed libraries to the beginning of the library search list
-+ new_libs=
-+ for path in $notinst_path; do
-+ case " $new_libs " in
-+ *" -L$path/$objdir "*) ;;
-+ *)
-+ case " $compile_deplibs " in
-+ *" -L$path/$objdir "*)
-+ new_libs="$new_libs -L$path/$objdir" ;;
-+ esac
-+ ;;
-+ esac
-+ done
-+ for deplib in $compile_deplibs; do
-+ case $deplib in
-+ -L*)
-+ case " $new_libs " in
-+ *" $deplib "*) ;;
-+ *) new_libs="$new_libs $deplib" ;;
-+ esac
-+ ;;
-+ *) new_libs="$new_libs $deplib" ;;
-+ esac
-+ done
-+ compile_deplibs="$new_libs"
-+
-+
-+ compile_command="$compile_command $compile_deplibs"
-+ finalize_command="$finalize_command $finalize_deplibs"
-+
-+ if test -n "$rpath$xrpath"; then
-+ # If the user specified any rpath flags, then add them.
-+ for libdir in $rpath $xrpath; do
-+ # This is the magic to use -rpath.
-+ case "$finalize_rpath " in
-+ *" $libdir "*) ;;
-+ *) finalize_rpath="$finalize_rpath $libdir" ;;
-+ esac
-+ done
-+ fi
-+
-+ # Now hardcode the library paths
-+ rpath=
-+ hardcode_libdirs=
-+ for libdir in $compile_rpath $finalize_rpath; do
-+ if test -n "$hardcode_libdir_flag_spec"; then
-+ if test -n "$hardcode_libdir_separator"; then
-+ if test -z "$hardcode_libdirs"; then
-+ hardcode_libdirs="$libdir"
-+ else
-+ # Just accumulate the unique libdirs.
-+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-+ ;;
-+ *)
-+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-+ ;;
-+ esac
-+ fi
-+ else
-+ eval flag=\"$hardcode_libdir_flag_spec\"
-+ rpath="$rpath $flag"
-+ fi
-+ elif test -n "$runpath_var"; then
-+ case "$perm_rpath " in
-+ *" $libdir "*) ;;
-+ *) perm_rpath="$perm_rpath $libdir" ;;
-+ esac
-+ fi
-+ case $host in
-+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-+ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
-+ case :$dllsearchpath: in
-+ *":$libdir:"*) ;;
-+ ::) dllsearchpath=$libdir;;
-+ *) dllsearchpath="$dllsearchpath:$libdir";;
-+ esac
-+ case :$dllsearchpath: in
-+ *":$testbindir:"*) ;;
-+ ::) dllsearchpath=$testbindir;;
-+ *) dllsearchpath="$dllsearchpath:$testbindir";;
-+ esac
-+ ;;
-+ esac
-+ done
-+ # Substitute the hardcoded libdirs into the rpath.
-+ if test -n "$hardcode_libdir_separator" &&
-+ test -n "$hardcode_libdirs"; then
-+ libdir="$hardcode_libdirs"
-+ eval rpath=\" $hardcode_libdir_flag_spec\"
-+ fi
-+ compile_rpath="$rpath"
-+
-+ rpath=
-+ hardcode_libdirs=
-+ for libdir in $finalize_rpath; do
-+ if test -n "$hardcode_libdir_flag_spec"; then
-+ if test -n "$hardcode_libdir_separator"; then
-+ if test -z "$hardcode_libdirs"; then
-+ hardcode_libdirs="$libdir"
-+ else
-+ # Just accumulate the unique libdirs.
-+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-+ ;;
-+ *)
-+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-+ ;;
-+ esac
-+ fi
-+ else
-+ eval flag=\"$hardcode_libdir_flag_spec\"
-+ rpath="$rpath $flag"
-+ fi
-+ elif test -n "$runpath_var"; then
-+ case "$finalize_perm_rpath " in
-+ *" $libdir "*) ;;
-+ *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
-+ esac
-+ fi
-+ done
-+ # Substitute the hardcoded libdirs into the rpath.
-+ if test -n "$hardcode_libdir_separator" &&
-+ test -n "$hardcode_libdirs"; then
-+ libdir="$hardcode_libdirs"
-+ eval rpath=\" $hardcode_libdir_flag_spec\"
-+ fi
-+ finalize_rpath="$rpath"
-+
-+ if test -n "$libobjs" && test "$build_old_libs" = yes; then
-+ # Transform all the library objects into standard objects.
-+ compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-+ finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-+ fi
-+
-+ func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
-+
-+ # template prelinking step
-+ if test -n "$prelink_cmds"; then
-+ func_execute_cmds "$prelink_cmds" 'exit $?'
-+ fi
-+
-+ wrappers_required=yes
-+ case $host in
-+ *cygwin* | *mingw* )
-+ if test "$build_libtool_libs" != yes; then
-+ wrappers_required=no
-+ fi
-+ ;;
-+ *cegcc)
-+ # Disable wrappers for cegcc, we are cross compiling anyway.
-+ wrappers_required=no
-+ ;;
-+ *)
-+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
-+ wrappers_required=no
-+ fi
-+ ;;
-+ esac
-+ if test "$wrappers_required" = no; then
-+ # Replace the output file specification.
-+ compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-+ link_command="$compile_command$compile_rpath"
-+
-+ # We have no uninstalled library dependencies, so finalize right now.
-+ exit_status=0
-+ func_show_eval "$link_command" 'exit_status=$?'
-+
-+ # Delete the generated files.
-+ if test -f "$output_objdir/${outputname}S.${objext}"; then
-+ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
-+ fi
-+
-+ exit $exit_status
-+ fi
-+
-+ if test -n "$compile_shlibpath$finalize_shlibpath"; then
-+ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
-+ fi
-+ if test -n "$finalize_shlibpath"; then
-+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
-+ fi
-+
-+ compile_var=
-+ finalize_var=
-+ if test -n "$runpath_var"; then
-+ if test -n "$perm_rpath"; then
-+ # We should set the runpath_var.
-+ rpath=
-+ for dir in $perm_rpath; do
-+ rpath="$rpath$dir:"
-+ done
-+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
-+ fi
-+ if test -n "$finalize_perm_rpath"; then
-+ # We should set the runpath_var.
-+ rpath=
-+ for dir in $finalize_perm_rpath; do
-+ rpath="$rpath$dir:"
-+ done
-+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
-+ fi
-+ fi
-+
-+ if test "$no_install" = yes; then
-+ # We don't need to create a wrapper script.
-+ link_command="$compile_var$compile_command$compile_rpath"
-+ # Replace the output file specification.
-+ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-+ # Delete the old output file.
-+ $opt_dry_run || $RM $output
-+ # Link the executable and exit
-+ func_show_eval "$link_command" 'exit $?'
-+ exit $EXIT_SUCCESS
-+ fi
-+
-+ if test "$hardcode_action" = relink; then
-+ # Fast installation is not supported
-+ link_command="$compile_var$compile_command$compile_rpath"
-+ relink_command="$finalize_var$finalize_command$finalize_rpath"
-+
-+ func_warning "this platform does not like uninstalled shared libraries"
-+ func_warning "\`$output' will be relinked during installation"
-+ else
-+ if test "$fast_install" != no; then
-+ link_command="$finalize_var$compile_command$finalize_rpath"
-+ if test "$fast_install" = yes; then
-+ relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
-+ else
-+ # fast_install is set to needless
-+ relink_command=
-+ fi
-+ else
-+ link_command="$compile_var$compile_command$compile_rpath"
-+ relink_command="$finalize_var$finalize_command$finalize_rpath"
-+ fi
-+ fi
-+
-+ # Replace the output file specification.
-+ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-+
-+ # Delete the old output files.
-+ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
-+
-+ func_show_eval "$link_command" 'exit $?'
-+
-+ # Now create the wrapper script.
-+ func_verbose "creating $output"
-+
-+ # Quote the relink command for shipping.
-+ if test -n "$relink_command"; then
-+ # Preserve any variables that may affect compiler behavior
-+ for var in $variables_saved_for_relink; do
-+ if eval test -z \"\${$var+set}\"; then
-+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
-+ elif eval var_value=\$$var; test -z "$var_value"; then
-+ relink_command="$var=; export $var; $relink_command"
-+ else
-+ func_quote_for_eval "$var_value"
-+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
-+ fi
-+ done
-+ relink_command="(cd `pwd`; $relink_command)"
-+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-+ fi
-+
-+ # Quote $ECHO for shipping.
-+ if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
-+ case $progpath in
-+ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
-+ *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
-+ esac
-+ qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
-+ else
-+ qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
-+ fi
-+
-+ # Only actually do things if not in dry run mode.
-+ $opt_dry_run || {
-+ # win32 will think the script is a binary if it has
-+ # a .exe suffix, so we strip it off here.
-+ case $output in
-+ *.exe) func_stripname '' '.exe' "$output"
-+ output=$func_stripname_result ;;
-+ esac
-+ # test for cygwin because mv fails w/o .exe extensions
-+ case $host in
-+ *cygwin*)
-+ exeext=.exe
-+ func_stripname '' '.exe' "$outputname"
-+ outputname=$func_stripname_result ;;
-+ *) exeext= ;;
-+ esac
-+ case $host in
-+ *cygwin* | *mingw* )
-+ func_dirname_and_basename "$output" "" "."
-+ output_name=$func_basename_result
-+ output_path=$func_dirname_result
-+ cwrappersource="$output_path/$objdir/lt-$output_name.c"
-+ cwrapper="$output_path/$output_name.exe"
-+ $RM $cwrappersource $cwrapper
-+ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-+
-+ func_emit_cwrapperexe_src > $cwrappersource
-+
-+ # The wrapper executable is built using the $host compiler,
-+ # because it contains $host paths and files. If cross-
-+ # compiling, it, like the target executable, must be
-+ # executed on the $host or under an emulation environment.
-+ $opt_dry_run || {
-+ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
-+ $STRIP $cwrapper
-+ }
-+
-+ # Now, create the wrapper script for func_source use:
-+ func_ltwrapper_scriptname $cwrapper
-+ $RM $func_ltwrapper_scriptname_result
-+ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
-+ $opt_dry_run || {
-+ # note: this script will not be executed, so do not chmod.
-+ if test "x$build" = "x$host" ; then
-+ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
-+ else
-+ func_emit_wrapper no > $func_ltwrapper_scriptname_result
-+ fi
-+ }
-+ ;;
-+ * )
-+ $RM $output
-+ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
-+
-+ func_emit_wrapper no > $output
-+ chmod +x $output
-+ ;;
-+ esac
-+ }
-+ exit $EXIT_SUCCESS
-+ ;;
-+ esac
-+
-+ # See if we need to build an old-fashioned archive.
-+ for oldlib in $oldlibs; do
-+
-+ if test "$build_libtool_libs" = convenience; then
-+ oldobjs="$libobjs_save $symfileobj"
-+ addlibs="$convenience"
-+ build_libtool_libs=no
-+ else
-+ if test "$build_libtool_libs" = module; then
-+ oldobjs="$libobjs_save"
-+ build_libtool_libs=no
-+ else
-+ oldobjs="$old_deplibs $non_pic_objects"
-+ if test "$preload" = yes && test -f "$symfileobj"; then
-+ oldobjs="$oldobjs $symfileobj"
-+ fi
-+ fi
-+ addlibs="$old_convenience"
-+ fi
-+
-+ if test -n "$addlibs"; then
-+ gentop="$output_objdir/${outputname}x"
-+ generated="$generated $gentop"
-+
-+ func_extract_archives $gentop $addlibs
-+ oldobjs="$oldobjs $func_extract_archives_result"
-+ fi
-+
-+ # Do each command in the archive commands.
-+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-+ cmds=$old_archive_from_new_cmds
-+ else
-+
-+ # Add any objects from preloaded convenience libraries
-+ if test -n "$dlprefiles"; then
-+ gentop="$output_objdir/${outputname}x"
-+ generated="$generated $gentop"
-+
-+ func_extract_archives $gentop $dlprefiles
-+ oldobjs="$oldobjs $func_extract_archives_result"
-+ fi
-+
-+ # POSIX demands no paths to be encoded in archives. We have
-+ # to avoid creating archives with duplicate basenames if we
-+ # might have to extract them afterwards, e.g., when creating a
-+ # static archive out of a convenience library, or when linking
-+ # the entirety of a libtool archive into another (currently
-+ # not supported by libtool).
-+ if (for obj in $oldobjs
-+ do
-+ func_basename "$obj"
-+ $ECHO "$func_basename_result"
-+ done | sort | sort -uc >/dev/null 2>&1); then
-+ :
-+ else
-+ $ECHO "copying selected object files to avoid basename conflicts..."
-+ gentop="$output_objdir/${outputname}x"
-+ generated="$generated $gentop"
-+ func_mkdir_p "$gentop"
-+ save_oldobjs=$oldobjs
-+ oldobjs=
-+ counter=1
-+ for obj in $save_oldobjs
-+ do
-+ func_basename "$obj"
-+ objbase="$func_basename_result"
-+ case " $oldobjs " in
-+ " ") oldobjs=$obj ;;
-+ *[\ /]"$objbase "*)
-+ while :; do
-+ # Make sure we don't pick an alternate name that also
-+ # overlaps.
-+ newobj=lt$counter-$objbase
-+ func_arith $counter + 1
-+ counter=$func_arith_result
-+ case " $oldobjs " in
-+ *[\ /]"$newobj "*) ;;
-+ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
-+ esac
-+ done
-+ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
-+ oldobjs="$oldobjs $gentop/$newobj"
-+ ;;
-+ *) oldobjs="$oldobjs $obj" ;;
-+ esac
-+ done
-+ fi
-+ eval cmds=\"$old_archive_cmds\"
-+
-+ func_len " $cmds"
-+ len=$func_len_result
-+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-+ cmds=$old_archive_cmds
-+ else
-+ # the command line is too long to link in one step, link in parts
-+ func_verbose "using piecewise archive linking..."
-+ save_RANLIB=$RANLIB
-+ RANLIB=:
-+ objlist=
-+ concat_cmds=
-+ save_oldobjs=$oldobjs
-+ oldobjs=
-+ # Is there a better way of finding the last object in the list?
-+ for obj in $save_oldobjs
-+ do
-+ last_oldobj=$obj
-+ done
-+ eval test_cmds=\"$old_archive_cmds\"
-+ func_len " $test_cmds"
-+ len0=$func_len_result
-+ len=$len0
-+ for obj in $save_oldobjs
-+ do
-+ func_len " $obj"
-+ func_arith $len + $func_len_result
-+ len=$func_arith_result
-+ func_append objlist " $obj"
-+ if test "$len" -lt "$max_cmd_len"; then
-+ :
-+ else
-+ # the above command should be used before it gets too long
-+ oldobjs=$objlist
-+ if test "$obj" = "$last_oldobj" ; then
-+ RANLIB=$save_RANLIB
-+ fi
-+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-+ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
-+ objlist=
-+ len=$len0
-+ fi
-+ done
-+ RANLIB=$save_RANLIB
-+ oldobjs=$objlist
-+ if test "X$oldobjs" = "X" ; then
-+ eval cmds=\"\$concat_cmds\"
-+ else
-+ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
-+ fi
-+ fi
-+ fi
-+ func_execute_cmds "$cmds" 'exit $?'
-+ done
-+
-+ test -n "$generated" && \
-+ func_show_eval "${RM}r$generated"
-+
-+ # Now create the libtool archive.
-+ case $output in
-+ *.la)
-+ old_library=
-+ test "$build_old_libs" = yes && old_library="$libname.$libext"
-+ func_verbose "creating $output"
-+
-+ # Preserve any variables that may affect compiler behavior
-+ for var in $variables_saved_for_relink; do
-+ if eval test -z \"\${$var+set}\"; then
-+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
-+ elif eval var_value=\$$var; test -z "$var_value"; then
-+ relink_command="$var=; export $var; $relink_command"
-+ else
-+ func_quote_for_eval "$var_value"
-+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
-+ fi
-+ done
-+ # Quote the link command for shipping.
-+ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-+ if test "$hardcode_automatic" = yes ; then
-+ relink_command=
-+ fi
-+
-+ # Only create the output if not a dry run.
-+ $opt_dry_run || {
-+ for installed in no yes; do
-+ if test "$installed" = yes; then
-+ if test -z "$install_libdir"; then
-+ break
-+ fi
-+ output="$output_objdir/$outputname"i
-+ # Replace all uninstalled libtool libraries with the installed ones
-+ newdependency_libs=
-+ for deplib in $dependency_libs; do
-+ case $deplib in
-+ *.la)
-+ func_basename "$deplib"
-+ name="$func_basename_result"
-+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-+ test -z "$libdir" && \
-+ func_fatal_error "\`$deplib' is not a valid libtool archive"
-+ newdependency_libs="$newdependency_libs $libdir/$name"
-+ ;;
-+ *) newdependency_libs="$newdependency_libs $deplib" ;;
-+ esac
-+ done
-+ dependency_libs="$newdependency_libs"
-+ newdlfiles=
-+
-+ for lib in $dlfiles; do
-+ case $lib in
-+ *.la)
-+ func_basename "$lib"
-+ name="$func_basename_result"
-+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-+ test -z "$libdir" && \
-+ func_fatal_error "\`$lib' is not a valid libtool archive"
-+ newdlfiles="$newdlfiles $libdir/$name"
-+ ;;
-+ *) newdlfiles="$newdlfiles $lib" ;;
-+ esac
-+ done
-+ dlfiles="$newdlfiles"
-+ newdlprefiles=
-+ for lib in $dlprefiles; do
-+ case $lib in
-+ *.la)
-+ # Only pass preopened files to the pseudo-archive (for
-+ # eventual linking with the app. that links it) if we
-+ # didn't already link the preopened objects directly into
-+ # the library:
-+ func_basename "$lib"
-+ name="$func_basename_result"
-+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-+ test -z "$libdir" && \
-+ func_fatal_error "\`$lib' is not a valid libtool archive"
-+ newdlprefiles="$newdlprefiles $libdir/$name"
-+ ;;
-+ esac
-+ done
-+ dlprefiles="$newdlprefiles"
-+ else
-+ newdlfiles=
-+ for lib in $dlfiles; do
-+ case $lib in
-+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-+ *) abs=`pwd`"/$lib" ;;
-+ esac
-+ newdlfiles="$newdlfiles $abs"
-+ done
-+ dlfiles="$newdlfiles"
-+ newdlprefiles=
-+ for lib in $dlprefiles; do
-+ case $lib in
-+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-+ *) abs=`pwd`"/$lib" ;;
-+ esac
-+ newdlprefiles="$newdlprefiles $abs"
-+ done
-+ dlprefiles="$newdlprefiles"
-+ fi
-+ $RM $output
-+ # place dlname in correct position for cygwin
-+ tdlname=$dlname
-+ case $host,$output,$installed,$module,$dlname in
-+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
-+ esac
-+ $ECHO > $output "\
-+# $outputname - a libtool library file
-+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-+#
-+# Please DO NOT delete this file!
-+# It is necessary for linking the library.
-+
-+# The name that we can dlopen(3).
-+dlname='$tdlname'
-+
-+# Names of this library.
-+library_names='$library_names'
-+
-+# The name of the static archive.
-+old_library='$old_library'
-+
-+# Linker flags that can not go in dependency_libs.
-+inherited_linker_flags='$new_inherited_linker_flags'
-+
-+# Libraries that this one depends upon.
-+dependency_libs='$dependency_libs'
-+
-+# Names of additional weak libraries provided by this library
-+weak_library_names='$weak_libs'
-+
-+# Version information for $libname.
-+current=$current
-+age=$age
-+revision=$revision
-+
-+# Is this an already installed library?
-+installed=$installed
-+
-+# Should we warn about portability when linking against -modules?
-+shouldnotlink=$module
-+
-+# Files to dlopen/dlpreopen
-+dlopen='$dlfiles'
-+dlpreopen='$dlprefiles'
-+
-+# Directory that this library needs to be installed in:
-+libdir='$install_libdir'"
-+ if test "$installed" = no && test "$need_relink" = yes; then
-+ $ECHO >> $output "\
-+relink_command=\"$relink_command\""
-+ fi
-+ done
-+ }
-+
-+ # Do a symbolic link so that the libtool archive can be found in
-+ # LD_LIBRARY_PATH before the program is installed.
-+ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
-+ ;;
-+ esac
-+ exit $EXIT_SUCCESS
-+}
-+
-+{ test "$mode" = link || test "$mode" = relink; } &&
-+ func_mode_link ${1+"$@"}
-+
-+
-+# func_mode_uninstall arg...
-+func_mode_uninstall ()
-+{
-+ $opt_debug
-+ RM="$nonopt"
-+ files=
-+ rmforce=
-+ exit_status=0
-+
-+ # This variable tells wrapper scripts just to set variables rather
-+ # than running their programs.
-+ libtool_install_magic="$magic"
-+
-+ for arg
-+ do
-+ case $arg in
-+ -f) RM="$RM $arg"; rmforce=yes ;;
-+ -*) RM="$RM $arg" ;;
-+ *) files="$files $arg" ;;
-+ esac
-+ done
-+
-+ test -z "$RM" && \
-+ func_fatal_help "you must specify an RM program"
-+
-+ rmdirs=
-+
-+ origobjdir="$objdir"
-+ for file in $files; do
-+ func_dirname "$file" "" "."
-+ dir="$func_dirname_result"
-+ if test "X$dir" = X.; then
-+ objdir="$origobjdir"
-+ else
-+ objdir="$dir/$origobjdir"
-+ fi
-+ func_basename "$file"
-+ name="$func_basename_result"
-+ test "$mode" = uninstall && objdir="$dir"
-+
-+ # Remember objdir for removal later, being careful to avoid duplicates
-+ if test "$mode" = clean; then
-+ case " $rmdirs " in
-+ *" $objdir "*) ;;
-+ *) rmdirs="$rmdirs $objdir" ;;
-+ esac
-+ fi
-+
-+ # Don't error if the file doesn't exist and rm -f was used.
-+ if { test -L "$file"; } >/dev/null 2>&1 ||
-+ { test -h "$file"; } >/dev/null 2>&1 ||
-+ test -f "$file"; then
-+ :
-+ elif test -d "$file"; then
-+ exit_status=1
-+ continue
-+ elif test "$rmforce" = yes; then
-+ continue
-+ fi
-+
-+ rmfiles="$file"
-+
-+ case $name in
-+ *.la)
-+ # Possibly a libtool archive, so verify it.
-+ if func_lalib_p "$file"; then
-+ func_source $dir/$name
-+
-+ # Delete the libtool libraries and symlinks.
-+ for n in $library_names; do
-+ rmfiles="$rmfiles $objdir/$n"
-+ done
-+ test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-+
-+ case "$mode" in
-+ clean)
-+ case " $library_names " in
-+ # " " in the beginning catches empty $dlname
-+ *" $dlname "*) ;;
-+ *) rmfiles="$rmfiles $objdir/$dlname" ;;
-+ esac
-+ test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
-+ ;;
-+ uninstall)
-+ if test -n "$library_names"; then
-+ # Do each command in the postuninstall commands.
-+ func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
-+ fi
-+
-+ if test -n "$old_library"; then
-+ # Do each command in the old_postuninstall commands.
-+ func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
-+ fi
-+ # FIXME: should reinstall the best remaining shared library.
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ *.lo)
-+ # Possibly a libtool object, so verify it.
-+ if func_lalib_p "$file"; then
-+
-+ # Read the .lo file
-+ func_source $dir/$name
-+
-+ # Add PIC object to the list of files to remove.
-+ if test -n "$pic_object" &&
-+ test "$pic_object" != none; then
-+ rmfiles="$rmfiles $dir/$pic_object"
-+ fi
-+
-+ # Add non-PIC object to the list of files to remove.
-+ if test -n "$non_pic_object" &&
-+ test "$non_pic_object" != none; then
-+ rmfiles="$rmfiles $dir/$non_pic_object"
-+ fi
-+ fi
-+ ;;
-+
-+ *)
-+ if test "$mode" = clean ; then
-+ noexename=$name
-+ case $file in
-+ *.exe)
-+ func_stripname '' '.exe' "$file"
-+ file=$func_stripname_result
-+ func_stripname '' '.exe' "$name"
-+ noexename=$func_stripname_result
-+ # $file with .exe has already been added to rmfiles,
-+ # add $file without .exe
-+ rmfiles="$rmfiles $file"
-+ ;;
-+ esac
-+ # Do a test to see if this is a libtool program.
-+ if func_ltwrapper_p "$file"; then
-+ if func_ltwrapper_executable_p "$file"; then
-+ func_ltwrapper_scriptname "$file"
-+ relink_command=
-+ func_source $func_ltwrapper_scriptname_result
-+ rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
-+ else
-+ relink_command=
-+ func_source $dir/$noexename
-+ fi
-+
-+ # note $name still contains .exe if it was in $file originally
-+ # as does the version of $file that was added into $rmfiles
-+ rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
-+ if test "$fast_install" = yes && test -n "$relink_command"; then
-+ rmfiles="$rmfiles $objdir/lt-$name"
-+ fi
-+ if test "X$noexename" != "X$name" ; then
-+ rmfiles="$rmfiles $objdir/lt-${noexename}.c"
-+ fi
-+ fi
-+ fi
-+ ;;
-+ esac
-+ func_show_eval "$RM $rmfiles" 'exit_status=1'
-+ done
-+ objdir="$origobjdir"
-+
-+ # Try to remove the ${objdir}s in the directories where we deleted files
-+ for dir in $rmdirs; do
-+ if test -d "$dir"; then
-+ func_show_eval "rmdir $dir >/dev/null 2>&1"
-+ fi
-+ done
-+
-+ exit $exit_status
-+}
-+
-+{ test "$mode" = uninstall || test "$mode" = clean; } &&
-+ func_mode_uninstall ${1+"$@"}
-+
-+test -z "$mode" && {
-+ help="$generic_help"
-+ func_fatal_help "you must specify a MODE"
-+}
-+
-+test -z "$exec_cmd" && \
-+ func_fatal_help "invalid operation mode \`$mode'"
-+
-+if test -n "$exec_cmd"; then
-+ eval exec "$exec_cmd"
-+ exit $EXIT_FAILURE
-+fi
-+
-+exit $exit_status
-+
-+
-+# The TAGs below are defined such that we never get into a situation
-+# in which we disable both kinds of libraries. Given conflicting
-+# choices, we go for a static library, that is the most portable,
-+# since we can't tell whether shared libraries were disabled because
-+# the user asked for that or because the platform doesn't support
-+# them. This is particularly important on AIX, because we don't
-+# support having both static and shared libraries enabled at the same
-+# time on that platform, so we default to a shared-only configuration.
-+# If a disable-shared tag is given, we'll fallback to a static-only
-+# configuration. But we'll never go from static-only to shared-only.
-+
-+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-+build_libtool_libs=no
-+build_old_libs=yes
-+# ### END LIBTOOL TAG CONFIG: disable-shared
-+
-+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
-+# ### END LIBTOOL TAG CONFIG: disable-static
-+
-+# Local Variables:
-+# mode:shell-script
-+# sh-indentation:2
-+# End:
-+# vi:sw=2
-+