diff options
Diffstat (limited to 'package/libnet/patches/patch-include_Makefile_in')
| -rw-r--r-- | package/libnet/patches/patch-include_Makefile_in | 512 |
1 files changed, 512 insertions, 0 deletions
diff --git a/package/libnet/patches/patch-include_Makefile_in b/package/libnet/patches/patch-include_Makefile_in new file mode 100644 index 000000000..3ac54c212 --- /dev/null +++ b/package/libnet/patches/patch-include_Makefile_in @@ -0,0 +1,512 @@ +--- Libnet-1.0.2a.orig/include/Makefile.in 1970-01-01 00:00:00.000000000 +0100 ++++ Libnet-1.0.2a/include/Makefile.in 2009-06-12 21:48:27.000000000 +0200 +@@ -0,0 +1,509 @@ ++# Makefile.in generated by automake 1.8.5 from Makefile.am. ++# @configure_input@ ++ ++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, ++# 2003, 2004 Free Software Foundation, Inc. ++# This Makefile.in is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without ++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A ++# PARTICULAR PURPOSE. ++ ++@SET_MAKE@ ++ ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ ++VPATH = @srcdir@ ++pkgdatadir = $(datadir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = .. ++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ ++install_sh_DATA = $(install_sh) -c -m 644 ++install_sh_PROGRAM = $(install_sh) -c ++install_sh_SCRIPT = $(install_sh) -c ++INSTALL_HEADER = $(INSTALL_DATA) ++transform = $(program_transform_name) ++NORMAL_INSTALL = : ++PRE_INSTALL = : ++POST_INSTALL = : ++NORMAL_UNINSTALL = : ++PRE_UNINSTALL = : ++POST_UNINSTALL = : ++build_triplet = @build@ ++host_triplet = @host@ ++target_triplet = @target@ ++DIST_COMMON = $(include_HEADERS) $(srcdir)/Makefile.am \ ++ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ ++ $(top_srcdir)/Makefile.am.common ++subdir = include ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ ++ $(top_srcdir)/configure.in ++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ ++ $(ACLOCAL_M4) ++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ++CONFIG_HEADER = config.h ++CONFIG_CLEAN_FILES = ++depcomp = ++am__depfiles_maybe = ++SOURCES = ++DIST_SOURCES = ++RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ ++ html-recursive info-recursive install-data-recursive \ ++ install-exec-recursive install-info-recursive \ ++ install-recursive installcheck-recursive installdirs-recursive \ ++ pdf-recursive ps-recursive uninstall-info-recursive \ ++ uninstall-recursive ++am__installdirs = "$(DESTDIR)$(includedir)" ++includeHEADERS_INSTALL = $(INSTALL_HEADER) ++HEADERS = $(include_HEADERS) ++ETAGS = etags ++CTAGS = ctags ++DIST_SUBDIRS = $(SUBDIRS) ++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++ACLOCAL = @ACLOCAL@ ++ADDITIONAL_LIBS = @ADDITIONAL_LIBS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ ++AMTAR = @AMTAR@ ++AR = @AR@ ++AUTOCONF = @AUTOCONF@ ++AUTOHEADER = @AUTOHEADER@ ++AUTOMAKE = @AUTOMAKE@ ++AWK = @AWK@ ++BIN_PREFIX = @BIN_PREFIX@ ++CC = @CC@ ++CCDEPMODE = @CCDEPMODE@ ++CFLAGS = @CFLAGS@ ++CPP = @CPP@ ++CPPFLAGS = @CPPFLAGS@ ++CYGPATH_W = @CYGPATH_W@ ++DEFS = @DEFS@ ++DEPDIR = @DEPDIR@ ++ECHO = @ECHO@ ++ECHO_C = @ECHO_C@ ++ECHO_N = @ECHO_N@ ++ECHO_T = @ECHO_T@ ++EGREP = @EGREP@ ++EXEEXT = @EXEEXT@ ++INC_PREFIX = @INC_PREFIX@ ++INSTALL_DATA = @INSTALL_DATA@ ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ ++INSTALL_SCRIPT = @INSTALL_SCRIPT@ ++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ ++LDFLAGS = @LDFLAGS@ ++LIBNET_CONFIG_CFLAGS = @LIBNET_CONFIG_CFLAGS@ ++LIBNET_CONFIG_DEFINES = @LIBNET_CONFIG_DEFINES@ ++LIBNET_CONFIG_LIBS = @LIBNET_CONFIG_LIBS@ ++LIBOBJS = @LIBOBJS@ ++LIBS = @LIBS@ ++LIBTOOL = @LIBTOOL@ ++LIB_PREFIX = @LIB_PREFIX@ ++LL_INT_TYPE = @LL_INT_TYPE@ ++LL_INT_TYPE_UC = @LL_INT_TYPE_UC@ ++LN = @LN@ ++LN_S = @LN_S@ ++LTLIBOBJS = @LTLIBOBJS@ ++MAKEINFO = @MAKEINFO@ ++MAN_PREFIX = @MAN_PREFIX@ ++OBJEXT = @OBJEXT@ ++PACKAGE = @PACKAGE@ ++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ ++PACKAGE_NAME = @PACKAGE_NAME@ ++PACKAGE_STRING = @PACKAGE_STRING@ ++PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_VERSION = @PACKAGE_VERSION@ ++PATH_SEPARATOR = @PATH_SEPARATOR@ ++RANLIB = @RANLIB@ ++SET_MAKE = @SET_MAKE@ ++SHELL = @SHELL@ ++STRIP = @STRIP@ ++VERSION = @VERSION@ ++ac_ct_CC = @ac_ct_CC@ ++ac_ct_RANLIB = @ac_ct_RANLIB@ ++ac_ct_STRIP = @ac_ct_STRIP@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ ++am__include = @am__include@ ++am__leading_dot = @am__leading_dot@ ++am__quote = @am__quote@ ++bindir = @bindir@ ++build = @build@ ++build_alias = @build_alias@ ++build_cpu = @build_cpu@ ++build_os = @build_os@ ++build_vendor = @build_vendor@ ++datadir = @datadir@ ++exec_prefix = @exec_prefix@ ++host = @host@ ++host_alias = @host_alias@ ++host_cpu = @host_cpu@ ++host_os = @host_os@ ++host_vendor = @host_vendor@ ++includedir = @includedir@ ++infodir = @infodir@ ++install_sh = @install_sh@ ++libdir = @libdir@ ++libexecdir = @libexecdir@ ++localstatedir = @localstatedir@ ++mandir = @mandir@ ++mkdir_p = @mkdir_p@ ++oldincludedir = @oldincludedir@ ++prefix = @prefix@ ++program_transform_name = @program_transform_name@ ++sbindir = @sbindir@ ++sharedstatedir = @sharedstatedir@ ++sysconfdir = @sysconfdir@ ++target = @target@ ++target_alias = @target_alias@ ++target_cpu = @target_cpu@ ++target_os = @target_os@ ++target_vendor = @target_vendor@ ++AUTOMAKE_OPTIONS = foreign no-dependencies ++DISTCLEANFILES = *~ ++SUBDIRS = libnet ++include_HEADERS = libnet.h ++all: config.h ++ $(MAKE) $(AM_MAKEFLAGS) all-recursive ++ ++.SUFFIXES: ++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/Makefile.am.common $(am__configure_deps) ++ @for dep in $?; do \ ++ case '$(am__configure_deps)' in \ ++ *$$dep*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ ++ && exit 0; \ ++ exit 1;; \ ++ esac; \ ++ done; \ ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign include/Makefile'; \ ++ cd $(top_srcdir) && \ ++ $(AUTOMAKE) --foreign include/Makefile ++.PRECIOUS: Makefile ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ @case '$?' in \ ++ *config.status*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ ++ *) \ ++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ ++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ ++ esac; ++ ++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++ ++$(top_srcdir)/configure: $(am__configure_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++ ++config.h: stamp-h1 ++ @if test ! -f $@; then \ ++ rm -f stamp-h1; \ ++ $(MAKE) stamp-h1; \ ++ else :; fi ++ ++stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status ++ @rm -f stamp-h1 ++ cd $(top_builddir) && $(SHELL) ./config.status include/config.h ++$(srcdir)/config.h.in: $(am__configure_deps) $(top_srcdir)/acconfig.h ++ cd $(top_srcdir) && $(AUTOHEADER) ++ rm -f stamp-h1 ++ touch $@ ++ ++distclean-hdr: ++ -rm -f config.h stamp-h1 ++ ++mostlyclean-libtool: ++ -rm -f *.lo ++ ++clean-libtool: ++ -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: ++install-includeHEADERS: $(include_HEADERS) ++ @$(NORMAL_INSTALL) ++ test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)" ++ @list='$(include_HEADERS)'; for p in $$list; do \ ++ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ ++ f="`echo $$p | sed -e 's|^.*/||'`"; \ ++ echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \ ++ $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \ ++ done ++ ++uninstall-includeHEADERS: ++ @$(NORMAL_UNINSTALL) ++ @list='$(include_HEADERS)'; for p in $$list; do \ ++ f="`echo $$p | sed -e 's|^.*/||'`"; \ ++ echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \ ++ rm -f "$(DESTDIR)$(includedir)/$$f"; \ ++ done ++ ++# This directory's subdirectories are mostly independent; you can cd ++# into them and run `make' without going through this Makefile. ++# To change the values of `make' variables: instead of editing Makefiles, ++# (1) if the variable is set in `config.status', edit `config.status' ++# (which will cause the Makefiles to be regenerated when you run `make'); ++# (2) otherwise, pass the desired values on the `make' command line. ++$(RECURSIVE_TARGETS): ++ @set fnord $$MAKEFLAGS; amf=$$2; \ ++ dot_seen=no; \ ++ target=`echo $@ | sed s/-recursive//`; \ ++ list='$(SUBDIRS)'; for subdir in $$list; do \ ++ echo "Making $$target in $$subdir"; \ ++ if test "$$subdir" = "."; then \ ++ dot_seen=yes; \ ++ local_target="$$target-am"; \ ++ else \ ++ local_target="$$target"; \ ++ fi; \ ++ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ ++ done; \ ++ if test "$$dot_seen" = "no"; then \ ++ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ ++ fi; test -z "$$fail" ++ ++mostlyclean-recursive clean-recursive distclean-recursive \ ++maintainer-clean-recursive: ++ @set fnord $$MAKEFLAGS; amf=$$2; \ ++ dot_seen=no; \ ++ case "$@" in \ ++ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ ++ *) list='$(SUBDIRS)' ;; \ ++ esac; \ ++ rev=''; for subdir in $$list; do \ ++ if test "$$subdir" = "."; then :; else \ ++ rev="$$subdir $$rev"; \ ++ fi; \ ++ done; \ ++ rev="$$rev ."; \ ++ target=`echo $@ | sed s/-recursive//`; \ ++ for subdir in $$rev; do \ ++ echo "Making $$target in $$subdir"; \ ++ if test "$$subdir" = "."; then \ ++ local_target="$$target-am"; \ ++ else \ ++ local_target="$$target"; \ ++ fi; \ ++ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ ++ done && test -z "$$fail" ++tags-recursive: ++ list='$(SUBDIRS)'; for subdir in $$list; do \ ++ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ done ++ctags-recursive: ++ list='$(SUBDIRS)'; for subdir in $$list; do \ ++ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ done ++ ++ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ mkid -fID $$unique ++tags: TAGS ++ ++TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ ++ $(TAGS_FILES) $(LISP) ++ tags=; \ ++ here=`pwd`; \ ++ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ ++ include_option=--etags-include; \ ++ empty_fix=.; \ ++ else \ ++ include_option=--include; \ ++ empty_fix=; \ ++ fi; \ ++ list='$(SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ test ! -f $$subdir/TAGS || \ ++ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ fi; \ ++ done; \ ++ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ test -n "$$unique" || unique=$$empty_fix; \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$tags $$unique; \ ++ fi ++ctags: CTAGS ++CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ ++ $(TAGS_FILES) $(LISP) ++ tags=; \ ++ here=`pwd`; \ ++ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ ++ $$tags $$unique ++ ++GTAGS: ++ here=`$(am__cd) $(top_builddir) && pwd` \ ++ && cd $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) $$here ++ ++distclean-tags: ++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags ++ ++distdir: $(DISTFILES) ++ $(mkdir_p) $(distdir)/.. ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ ++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ ++ if test -d $$d/$$file; then \ ++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ ++ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ fi; \ ++ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ else \ ++ test -f $(distdir)/$$file \ ++ || cp -p $$d/$$file $(distdir)/$$file \ ++ || exit 1; \ ++ fi; \ ++ done ++ list='$(SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ test -d "$(distdir)/$$subdir" \ ++ || mkdir "$(distdir)/$$subdir" \ ++ || exit 1; \ ++ (cd $$subdir && \ ++ $(MAKE) $(AM_MAKEFLAGS) \ ++ top_distdir="../$(top_distdir)" \ ++ distdir="../$(distdir)/$$subdir" \ ++ distdir) \ ++ || exit 1; \ ++ fi; \ ++ done ++check-am: all-am ++check: check-recursive ++all-am: Makefile $(HEADERS) config.h ++installdirs: installdirs-recursive ++installdirs-am: ++ for dir in "$(DESTDIR)$(includedir)"; do \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ ++ done ++install: install-recursive ++install-exec: install-exec-recursive ++install-data: install-data-recursive ++uninstall: uninstall-recursive ++ ++install-am: all-am ++ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am ++ ++installcheck: installcheck-recursive ++install-strip: ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ `test -z '$(STRIP)' || \ ++ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install ++mostlyclean-generic: ++ ++clean-generic: ++ ++distclean-generic: ++ -rm -f $(CONFIG_CLEAN_FILES) ++ -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) ++ ++maintainer-clean-generic: ++ @echo "This command is intended for maintainers to use" ++ @echo "it deletes files that may require special tools to rebuild." ++clean: clean-recursive ++ ++clean-am: clean-generic clean-libtool mostlyclean-am ++ ++distclean: distclean-recursive ++ -rm -f Makefile ++distclean-am: clean-am distclean-generic distclean-hdr \ ++ distclean-libtool distclean-tags ++ ++dvi: dvi-recursive ++ ++dvi-am: ++ ++html: html-recursive ++ ++info: info-recursive ++ ++info-am: ++ ++install-data-am: install-includeHEADERS ++ ++install-exec-am: ++ ++install-info: install-info-recursive ++ ++install-man: ++ ++installcheck-am: ++ ++maintainer-clean: maintainer-clean-recursive ++ -rm -f Makefile ++maintainer-clean-am: distclean-am maintainer-clean-generic ++ ++mostlyclean: mostlyclean-recursive ++ ++mostlyclean-am: mostlyclean-generic mostlyclean-libtool ++ ++pdf: pdf-recursive ++ ++pdf-am: ++ ++ps: ps-recursive ++ ++ps-am: ++ ++uninstall-am: uninstall-includeHEADERS uninstall-info-am ++ ++uninstall-info: uninstall-info-recursive ++ ++.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \ ++ clean clean-generic clean-libtool clean-recursive ctags \ ++ ctags-recursive distclean distclean-generic distclean-hdr \ ++ distclean-libtool distclean-recursive distclean-tags distdir \ ++ dvi dvi-am html html-am info info-am install install-am \ ++ install-data install-data-am install-exec install-exec-am \ ++ install-includeHEADERS install-info install-info-am \ ++ install-man install-strip installcheck installcheck-am \ ++ installdirs installdirs-am maintainer-clean \ ++ maintainer-clean-generic maintainer-clean-recursive \ ++ mostlyclean mostlyclean-generic mostlyclean-libtool \ ++ mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ ++ uninstall uninstall-am uninstall-includeHEADERS \ ++ uninstall-info-am ++ ++# Tell versions [3.59,3.63) of GNU make to not export all variables. ++# Otherwise a system limit (for SysV at least) may be exceeded. ++.NOEXPORT: |