diff options
Diffstat (limited to 'package/hostapd/files')
| -rw-r--r-- | package/hostapd/files/hostapd.conf | 23 | ||||
| -rw-r--r-- | package/hostapd/files/hostapd.config | 77 |
2 files changed, 100 insertions, 0 deletions
diff --git a/package/hostapd/files/hostapd.conf b/package/hostapd/files/hostapd.conf new file mode 100644 index 000000000..8676e96a6 --- /dev/null +++ b/package/hostapd/files/hostapd.conf @@ -0,0 +1,23 @@ +##### hostapd configuration file ##### +interface=wlan0 +#bridge=br0 +driver=nl80211 +logger_syslog=-1 +logger_syslog_level=0 +logger_stdout=-1 +logger_stdout_level=0 +ctrl_interface=/var/run/hostapd +ctrl_interface_group=0 +# set ssid, channel and mode +ssid=openadk +hw_mode=g +channel=1 +# enable WPA2 (WEP/WPA disabled) +macaddr_acl=0 +auth_algs=1 +ignore_broadcast_ssid=0 +wpa=2 +wpa_passphrase=secret123 +wpa_key_mgmt=WPA-PSK +wpa_pairwise=TKIP +rsn_pairwise=CCMP diff --git a/package/hostapd/files/hostapd.config b/package/hostapd/files/hostapd.config new file mode 100644 index 000000000..7f9815dff --- /dev/null +++ b/package/hostapd/files/hostapd.config @@ -0,0 +1,77 @@ +# Example hostapd build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cass, these lines should use += in order not +# to override previous values of the variables. + +# Driver interface for drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y + +# Driver interface for Host AP driver +#CONFIG_DRIVER_HOSTAP=y + +# Driver interface for wired authenticator +#CONFIG_DRIVER_WIRED=y + +# Driver interface for madwifi driver +#CONFIG_DRIVER_MADWIFI=y +#CFLAGS += -I../head # change to reflect local setup; directory for madwifi src + +# Driver interface for Prism54 driver +#CONFIG_DRIVER_PRISM54=y + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib + +# IEEE 802.11F/IAPP +#CONFIG_IAPP=y + +# WPA2/IEEE 802.11i RSN pre-authentication +# CONFIG_RSN_PREAUTH=y + +# Integrated EAP authenticator +#CONFIG_EAP=y + +# EAP-MD5 for the integrated EAP authenticator +#CONFIG_EAP_MD5=y + +# EAP-TLS for the integrated EAP authenticator +#CONFIG_EAP_TLS=y + +# EAP-MSCHAPv2 for the integrated EAP authenticator +#CONFIG_EAP_MSCHAPV2=y + +# EAP-PEAP for the integrated EAP authenticator +#CONFIG_EAP_PEAP=y + +# EAP-PSK for the integrated EAP authenticator +#CONFIG_EAP_PSK=y + +# EAP-GTC for the integrated EAP authenticator +#CONFIG_EAP_GTC=y + +# EAP-TTLS for the integrated EAP authenticator +#CONFIG_EAP_TTLS=y + +# EAP-SIM for the integrated EAP authenticator +#CONFIG_EAP_SIM=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +#CONFIG_PKCS12=y + +# RADIUS authentication server. This provides access to the integrated EAP +# authenticator from external hosts using RADIUS. +#CONFIG_RADIUS_SERVER=y +# +# Remove debugging code that is printing out debug messages to stdout. +# This can be used to reduce the size of the hostapd considerably if debugging +# code is not needed. +#CONFIG_NO_STDOUT_DEBUG=y |