diff options
| -rw-r--r-- | Config.in | 1 | ||||
| -rw-r--r-- | target/config/Config.in.rootfs | 188 | ||||
| -rw-r--r-- | target/config/Config.in.target | 183 |
3 files changed, 189 insertions, 183 deletions
@@ -28,6 +28,7 @@ source "target/config/Config.in.subsystem" source "target/config/Config.in.tc" source "target/config/Config.in.xtensa" source "target/config/Config.in.qemuopts" +source "target/config/Config.in.rootfs" source "target/config/Config.in.target" endmenu diff --git a/target/config/Config.in.rootfs b/target/config/Config.in.rootfs new file mode 100644 index 000000000..b9f7023df --- /dev/null +++ b/target/config/Config.in.rootfs @@ -0,0 +1,188 @@ +# This file is part of the OpenADK project. OpenADK is copyrighted +# material, please see the LICENCE file in the top-level directory. + +choice +prompt "Root filesystem type" +depends on !ADK_TARGET_TOOLCHAIN +default ADK_TARGET_ROOTFS_ARCHIVE + +config ADK_TARGET_ROOTFS_INITRAMFS + bool "initramfs filesystem" + depends on \ + ADK_TARGET_QEMU || \ + ADK_TARGET_ARCH_M68K || \ + ADK_TARGET_ARCH_ARM || \ + ADK_TARGET_ARCH_MICROBLAZE || \ + ADK_TARGET_ARCH_MIPS || \ + ADK_TARGET_ARCH_PPC || \ + ADK_TARGET_ARCH_SH || \ + ADK_TARGET_ARCH_SPARC || \ + ADK_TARGET_ARCH_X86 || \ + ADK_TARGET_ARCH_X86_64 + depends on !ADK_TARGET_VBOX + depends on !ADK_TARGET_SYSTEM_MIKROTIK_RB532 + depends on !ADK_TARGET_SYSTEM_QEMU_M68K_MCF5208 + depends on !ADK_TARGET_SYSTEM_QEMU_METAG + select ADK_KERNEL_BLK_DEV_INITRD + help + create an read-only initramfs system. + +config ADK_TARGET_ROOTFS_INITRAMFSPIGGYBACK + bool "initramfs filesystem included into kernel image" + select ADK_TARGET_ARCH_INITRAMFS_BUILTIN + depends on \ + ADK_TARGET_QEMU || \ + ADK_TARGET_SIM || \ + ADK_TARGET_SYSTEM_OR1K_SIM || \ + ADK_TARGET_ARCH_AARCH64 || \ + ADK_TARGET_ARCH_ARC || \ + ADK_TARGET_ARCH_ARM || \ + ADK_TARGET_ARCH_M68K || \ + ADK_TARGET_ARCH_MICROBLAZE || \ + ADK_TARGET_ARCH_MIPS || \ + ADK_TARGET_ARCH_PPC || \ + ADK_TARGET_ARCH_SH || \ + ADK_TARGET_ARCH_SPARC || \ + ADK_TARGET_ARCH_X86 || \ + ADK_TARGET_ARCH_X86_64 + depends on !ADK_TARGET_VBOX + depends on !ADK_TARGET_SYSTEM_MIKROTIK_RB532 + help + create an read-only initramfs system. + +config ADK_TARGET_ROOTFS_SQUASHFS + bool "Compressed read-only root filesystem (squashfs)" + select ADK_KERNEL_SQUASHFS + select ADK_HOST_NEED_SQUASHFS + select ADK_HOST_NEED_QEMU if ADK_TARGET_QEMU + depends on ADK_TARGET_WITH_MTD \ + || ADK_TARGET_SYSTEM_QEMU_MICROBLAZE_S3ADSP1800 \ + || ADK_TARGET_SYSTEM_QEMU_MICROBLAZE_ML605 + help + highly compressed read-only filesystem for MTD flash systems. + +config ADK_TARGET_ROOTFS_JFFS2 + bool "Compressed read-write root filesystem (jffs2)" + select ADK_KERNEL_JFFS2_FS + select ADK_HOST_NEED_MTD_UTILS + depends on ADK_TARGET_WITH_MTD \ + || ADK_TARGET_SYSTEM_QEMU_MICROBLAZE_S3ADSP1800 \ + || ADK_TARGET_SYSTEM_QEMU_MICROBLAZE_ML605 + help + compressed read-write filesystem for MTD flash systems. + +config ADK_TARGET_ROOTFS_YAFFS + bool "YAFFS2 root filesystem (NAND)" + select ADK_KERNEL_MISC_FILESYSTEMS + select ADK_KERNEL_YAFFS_FS + select ADK_KERNEL_YAFFS_YAFFS2 + select ADK_KERNEL_YAFFS_AUTO_YAFFS2 + depends on ADK_TARGET_WITH_NAND + help + Root filesystem on NAND flash with YAFFS2. + +config ADK_TARGET_ROOTFS_NFSROOT + bool "NFS root" + select ADK_KERNEL_NETWORK_FILESYSTEMS + select ADK_KERNEL_SUNRPC + select ADK_KERNEL_NFS_FS + select ADK_KERNEL_NFS_V3 + select ADK_KERNEL_ROOT_NFS + select ADK_KERNEL_NFS_COMMON + select ADK_KERNEL_IP_PNP + select ADK_KERNEL_IP_PNP_DHCP + depends on !ADK_TARGET_QEMU && \ + !ADK_TARGET_SIM && \ + !ADK_TARGET_VBOX && \ + !ADK_TARGET_SYSTEM_ARANYM_M68K && \ + !ADK_TARGET_SYSTEM_ARM_FM + help + Root filesystem mounted via NFS. (DHCP) + +config ADK_TARGET_ROOTFS_USB + bool "Boot from USB stick" + select ADK_KERNEL_NLS + select ADK_KERNEL_SCSI + select ADK_KERNEL_BLK_DEV_SD + select ADK_KERNEL_USB + select ADK_KERNEL_USB_EHCI_HCD + select ADK_KERNEL_USB_OHCI_HCD + select ADK_KERNEL_USB_UHCI_HCD + select ADK_KERNEL_USB_STORAGE + select ADK_PACKAGE_ADKINSTALL + depends on ADK_TARGET_WITH_USB_BOOT + help + Boot system from USB stick. + +config ADK_TARGET_ROOTFS_ISO + bool "ISO image" + select ADK_KERNEL_ISO9660_FS + select ADK_KERNEL_JOLIET + select ADK_KERNEL_SCSI + select ADK_KERNEL_BLK_DEV_SR + select ADK_HOST_NEED_CDRTOOLS + select ADK_HOST_NEED_SYSLINUX + depends on ADK_TARGET_ARCH_X86 + help + Use this option to create a bootable ISO image. + +config ADK_TARGET_ROOTFS_INITRAMFSARCHIVE + bool "Archive usable for initramfs creation" + depends on !ADK_TARGET_SYSTEM_MIKROTIK_RB532 \ + && !ADK_TARGET_SYSTEM_QEMU_M68K_MCF5208 \ + && !ADK_TARGET_SYSTEM_QEMU_METAG \ + && !ADK_TARGET_SIM + select ADK_KERNEL_BLK_DEV_INITRD + help + Use this option if your planning to create a initramfs. + +config ADK_TARGET_ROOTFS_ARCHIVE + bool "Archive usable for different filesystems" + select ADK_HOST_NEED_GENEXT2FS if ADK_TARGET_QEMU || ADK_TARGET_VBOX + select ADK_KERNEL_EXT2_FS if ADK_TARGET_QEMU || ADK_TARGET_VBOX + depends on !ADK_TARGET_SIM \ + && !ADK_TARGET_SYSTEM_QEMU_M68K_MCF5208 \ + && !ADK_TARGET_SYSTEM_QEMU_METAG + help + Use this option if your root filesystem is ext2/ext3/ext4/xfs. + +endchoice + +choice +prompt "Root filesystem type" +depends on ADK_TARGET_ROOTFS_ARCHIVE || ADK_TARGET_ROOTFS_USB && !ADK_TARGET_QEMU +default ADK_TARGET_ROOT_EXT4 + +config ADK_TARGET_ROOT_EXT4 + bool "EXT4 filesystem" + select ADK_KERNEL_EXT4_FS + help + Compile EXT4 filesystem into kernel and use it as root filesystem. + +config ADK_TARGET_ROOT_XFS + bool "XFS filesystem" + select ADK_KERNEL_XFS_FS + help + Compile XFS filesystem into kernel and use it as root filesystem. + +config ADK_TARGET_ROOT_EXT2 + bool "EXT2 filesystem" + select ADK_KERNEL_EXT2_FS + help + Compile EXT2 filesystem into kernel and use it as root filesystem. + +config ADK_TARGET_ROOT_EXT3 + bool "EXT3 filesystem" + select ADK_KERNEL_EXT3_FS + help + Compile EXT3 filesystem into kernel and use it as root filesystem. + +endchoice + +config ADK_TARGET_ROOTFS + string + default "xfs" if ADK_TARGET_ROOT_XFS + default "ext2" if ADK_TARGET_ROOT_EXT2 + default "ext3" if ADK_TARGET_ROOT_EXT3 + default "ext4" if ADK_TARGET_ROOT_EXT4 + diff --git a/target/config/Config.in.target b/target/config/Config.in.target index 4bf725e74..96c96b947 100644 --- a/target/config/Config.in.target +++ b/target/config/Config.in.target @@ -9,189 +9,6 @@ config ADK_TARGET_CMDLINE default "metag_da.console_poll=1" if ADK_TARGET_SYSTEM_QEMU_METAG default "" -choice -prompt "Firmware type" -depends on !ADK_TARGET_TOOLCHAIN -default ADK_TARGET_ROOTFS_ARCHIVE - -config ADK_TARGET_ROOTFS_INITRAMFS - bool "initramfs filesystem" - depends on \ - ADK_TARGET_QEMU || \ - ADK_TARGET_ARCH_M68K || \ - ADK_TARGET_ARCH_ARM || \ - ADK_TARGET_ARCH_MICROBLAZE || \ - ADK_TARGET_ARCH_MIPS || \ - ADK_TARGET_ARCH_PPC || \ - ADK_TARGET_ARCH_SH || \ - ADK_TARGET_ARCH_SPARC || \ - ADK_TARGET_ARCH_X86 || \ - ADK_TARGET_ARCH_X86_64 - depends on !ADK_TARGET_VBOX - depends on !ADK_TARGET_SYSTEM_MIKROTIK_RB532 - depends on !ADK_TARGET_SYSTEM_QEMU_M68K_MCF5208 - select ADK_KERNEL_BLK_DEV_INITRD - help - create an read-only initramfs system. - -config ADK_TARGET_ROOTFS_INITRAMFSPIGGYBACK - bool "initramfs filesystem included into kernel image" - select ADK_TARGET_ARCH_INITRAMFS_BUILTIN - depends on \ - ADK_TARGET_QEMU || \ - ADK_TARGET_SIM || \ - ADK_TARGET_SYSTEM_OR1K_SIM || \ - ADK_TARGET_ARCH_AARCH64 || \ - ADK_TARGET_ARCH_ARC || \ - ADK_TARGET_ARCH_ARM || \ - ADK_TARGET_ARCH_M68K || \ - ADK_TARGET_ARCH_MICROBLAZE || \ - ADK_TARGET_ARCH_MIPS || \ - ADK_TARGET_ARCH_PPC || \ - ADK_TARGET_ARCH_SH || \ - ADK_TARGET_ARCH_SPARC || \ - ADK_TARGET_ARCH_X86 || \ - ADK_TARGET_ARCH_X86_64 - depends on !ADK_TARGET_VBOX - depends on !ADK_TARGET_SYSTEM_MIKROTIK_RB532 - help - create an read-only initramfs system. - -config ADK_TARGET_ROOTFS_SQUASHFS - bool "Compressed read-only root filesystem (squashfs)" - select ADK_KERNEL_SQUASHFS - select ADK_HOST_NEED_SQUASHFS - select ADK_HOST_NEED_QEMU if ADK_TARGET_QEMU - depends on ADK_TARGET_WITH_MTD \ - || ADK_TARGET_SYSTEM_QEMU_MICROBLAZE_S3ADSP1800 \ - || ADK_TARGET_SYSTEM_QEMU_MICROBLAZE_ML605 - help - highly compressed read-only filesystem for MTD flash systems. - -config ADK_TARGET_ROOTFS_JFFS2 - bool "Compressed read-write root filesystem (jffs2)" - select ADK_KERNEL_JFFS2_FS - select ADK_HOST_NEED_MTD_UTILS - depends on ADK_TARGET_WITH_MTD \ - || ADK_TARGET_SYSTEM_QEMU_MICROBLAZE_S3ADSP1800 \ - || ADK_TARGET_SYSTEM_QEMU_MICROBLAZE_ML605 - help - compressed read-write filesystem for MTD flash systems. - -config ADK_TARGET_ROOTFS_YAFFS - bool "YAFFS2 root filesystem (NAND)" - select ADK_KERNEL_MISC_FILESYSTEMS - select ADK_KERNEL_YAFFS_FS - select ADK_KERNEL_YAFFS_YAFFS2 - select ADK_KERNEL_YAFFS_AUTO_YAFFS2 - depends on ADK_TARGET_WITH_NAND - help - Root filesystem on NAND flash with YAFFS2. - -config ADK_TARGET_ROOTFS_NFSROOT - bool "NFS root" - select ADK_KERNEL_NETWORK_FILESYSTEMS - select ADK_KERNEL_SUNRPC - select ADK_KERNEL_NFS_FS - select ADK_KERNEL_NFS_V3 - select ADK_KERNEL_ROOT_NFS - select ADK_KERNEL_NFS_COMMON - select ADK_KERNEL_IP_PNP - select ADK_KERNEL_IP_PNP_DHCP - depends on !ADK_TARGET_QEMU && \ - !ADK_TARGET_SIM && \ - !ADK_TARGET_VBOX && \ - !ADK_TARGET_SYSTEM_ARANYM_M68K && \ - !ADK_TARGET_SYSTEM_ARM_FM - help - Root filesystem mounted via NFS. (DHCP) - -config ADK_TARGET_ROOTFS_USB - bool "Boot from USB stick" - select ADK_KERNEL_NLS - select ADK_KERNEL_SCSI - select ADK_KERNEL_BLK_DEV_SD - select ADK_KERNEL_USB - select ADK_KERNEL_USB_EHCI_HCD - select ADK_KERNEL_USB_OHCI_HCD - select ADK_KERNEL_USB_UHCI_HCD - select ADK_KERNEL_USB_STORAGE - select ADK_PACKAGE_ADKINSTALL - depends on ADK_TARGET_WITH_USB_BOOT - help - Boot system from USB stick. - -config ADK_TARGET_ROOTFS_ISO - bool "ISO image" - select ADK_KERNEL_ISO9660_FS - select ADK_KERNEL_JOLIET - select ADK_KERNEL_SCSI - select ADK_KERNEL_BLK_DEV_SR - select ADK_HOST_NEED_CDRTOOLS - select ADK_HOST_NEED_SYSLINUX - depends on ADK_TARGET_ARCH_X86 - help - Use this option to create a bootable ISO image. - -config ADK_TARGET_ROOTFS_INITRAMFSARCHIVE - bool "Archive usable for initramfs creation" - depends on !ADK_TARGET_SYSTEM_MIKROTIK_RB532 \ - && !ADK_TARGET_SYSTEM_QEMU_M68K_MCF5208 \ - && !ADK_TARGET_SIM - select ADK_KERNEL_BLK_DEV_INITRD - help - Use this option if your planning to create a initramfs. - -config ADK_TARGET_ROOTFS_ARCHIVE - bool "Archive usable for different filesystems" - select ADK_HOST_NEED_GENEXT2FS if ADK_TARGET_QEMU || ADK_TARGET_VBOX - select ADK_KERNEL_EXT2_FS if ADK_TARGET_QEMU || ADK_TARGET_VBOX - depends on !ADK_TARGET_SIM \ - && !ADK_TARGET_SYSTEM_QEMU_M68K_MCF5208 - help - Use this option if your root filesystem is ext2/ext3/ext4/xfs. - -endchoice - -choice -prompt "Root filesystem type" -depends on ADK_TARGET_ROOTFS_ARCHIVE || ADK_TARGET_ROOTFS_USB && !ADK_TARGET_QEMU -default ADK_TARGET_ROOT_EXT4 - -config ADK_TARGET_ROOT_EXT4 - bool "EXT4 filesystem" - select ADK_KERNEL_EXT4_FS - help - Compile EXT4 filesystem into kernel and use it as root filesystem. - -config ADK_TARGET_ROOT_XFS - bool "XFS filesystem" - select ADK_KERNEL_XFS_FS - help - Compile XFS filesystem into kernel and use it as root filesystem. - -config ADK_TARGET_ROOT_EXT2 - bool "EXT2 filesystem" - select ADK_KERNEL_EXT2_FS - help - Compile EXT2 filesystem into kernel and use it as root filesystem. - -config ADK_TARGET_ROOT_EXT3 - bool "EXT3 filesystem" - select ADK_KERNEL_EXT3_FS - help - Compile EXT3 filesystem into kernel and use it as root filesystem. - -endchoice - -config ADK_TARGET_ROOTFS - string - default "xfs" if ADK_TARGET_ROOT_XFS - default "ext2" if ADK_TARGET_ROOT_EXT2 - default "ext3" if ADK_TARGET_ROOT_EXT3 - default "ext4" if ADK_TARGET_ROOT_EXT4 - help - config ADK_PACKAGE_SUFFIX string default "ipk" if ADK_TARGET_PACKAGE_IPKG |