summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Config.in13
-rw-r--r--mk/build.mk3
-rw-r--r--mk/kernel-ver.mk7
-rw-r--r--mk/linux.mk6
-rw-r--r--package/udev/Makefile2
-rw-r--r--target/avr32/sys-available/atmel-ngw1001
-rw-r--r--target/config/Config.in1
-rw-r--r--target/linux/patches/3.0.4/bsd-compatibility.patch2512
-rw-r--r--target/linux/patches/3.0.4/cris-etrax.patch12
-rw-r--r--target/linux/patches/3.0.4/fon2100.patch6279
-rw-r--r--target/linux/patches/3.0.4/gemalto.patch11
-rw-r--r--target/linux/patches/3.0.4/mips-malta.patch135
-rw-r--r--target/linux/patches/3.0.4/mmc-host.patch36
-rw-r--r--target/linux/patches/3.0.4/non-static.patch33
-rw-r--r--target/linux/patches/3.0.4/sparc-include.patch11
-rw-r--r--target/linux/patches/3.0.4/startup.patch20
-rw-r--r--target/linux/patches/3.0.4/usb-defaults-off.patch32
-rw-r--r--target/linux/patches/3.0.4/uuid.patch255
-rw-r--r--target/linux/patches/3.0.4/vga-cons-default-off.patch12
-rw-r--r--target/linux/patches/3.0.4/wlan-cf.patch11
-rw-r--r--target/linux/patches/3.0.4/x86-build.patch11
-rw-r--r--target/linux/patches/3.0.4/zlib-inflate.patch12
-rw-r--r--target/x86_64/kernel.config228
-rw-r--r--target/x86_64/sys-available/shuttle-sa7613
-rw-r--r--toolchain/kernel-headers/patches/3.0.4/aufs2.patch240
-rw-r--r--toolchain/kernel-headers/patches/3.0.4/cleankernel.patch11
-rw-r--r--toolchain/kernel-headers/patches/3.0.4/etrax-header.patch75
-rw-r--r--toolchain/kernel-headers/patches/3.0.4/linux-gcc-check.patch18
-rw-r--r--toolchain/kernel-headers/patches/3.0.4/microperl.patch24
29 files changed, 9974 insertions, 50 deletions
diff --git a/Config.in b/Config.in
index e86ff3f23..9fb096866 100644
--- a/Config.in
+++ b/Config.in
@@ -73,6 +73,19 @@ endmenu
menu "Kernel configuration"
depends on !ADK_TOOLCHAIN_ONLY && !ADK_CHOOSE_TARGET_ARCH && !ADK_CHOOSE_TARGET_KERNEL && !ADK_CHOOSE_TARGET_SYSTEM && ADK_TARGET_KERNEL_CUSTOMISING
+
+choice
+prompt "Kernel Version"
+config ADK_KERNEL_VERSION_2_6_39
+ prompt "2.6.39"
+ boolean
+
+config ADK_KERNEL_VERSION_3_0_4
+ prompt "3.0.4"
+ boolean
+
+endchoice
+
source "target/linux/Config.in"
endmenu
diff --git a/mk/build.mk b/mk/build.mk
index ed1165050..cb531addb 100644
--- a/mk/build.mk
+++ b/mk/build.mk
@@ -95,6 +95,9 @@ POSTCONFIG= -@\
touch .rebuild.bkeymaps;\
rebuild=1;\
fi; \
+ if [ "$$(grep ^ADK_KERNEL_VERSION .config|md5sum)" != "$$(grep ^ADK_KERNEL_VERSION .config.old|md5sum)" ];then \
+ make cleankernel ;\
+ fi; \
if [ $$rebuild -eq 1 ];then \
cp .config .config.old;\
fi; \
diff --git a/mk/kernel-ver.mk b/mk/kernel-ver.mk
index 46e8e9e5c..6a6202fbc 100644
--- a/mk/kernel-ver.mk
+++ b/mk/kernel-ver.mk
@@ -1,3 +1,10 @@
+ifeq ($(ADK_KERNEL_VERSION_2_6_39),y)
KERNEL_VERSION:= 2.6.39
KERNEL_RELEASE:= 1
KERNEL_MD5SUM:= 1aab7a741abe08d42e8eccf20de61e05
+endif
+ifeq ($(ADK_KERNEL_VERSION_3_0_4),y)
+KERNEL_VERSION:= 3.0.4
+KERNEL_RELEASE:= 1
+KERNEL_MD5SUM:= dff86c657cabe813bda84c72bfb93ae8
+endif
diff --git a/mk/linux.mk b/mk/linux.mk
index c880d8c2a..8cc68467f 100644
--- a/mk/linux.mk
+++ b/mk/linux.mk
@@ -4,6 +4,8 @@
PKG_NAME:= linux
PKG_VERSION:= $(KERNEL_VERSION)
PKG_RELEASE:= $(KERNEL_RELEASE)
-PKG_MD5SUM= $(KERNEL_MD5SUM)
-PKG_SITES= ${MASTER_SITE_KERNEL:=kernel/v2.6/}
+PKG_MD5SUM:= $(KERNEL_MD5SUM)
+PKG_VERSION_MAJOR:=$(word 1,$(subst ., ,$(subst -, ,$(PKG_VERSION))))
+PKG_VERSION_MINOR:=$(word 2,$(subst ., ,$(subst -, ,$(PKG_VERSION))))
+PKG_SITES:= ${MASTER_SITE_KERNEL:=kernel/v$(PKG_VERSION_MAJOR).$(PKG_VERSION_MINOR)/}
DISTFILES= $(PKG_NAME)-$(PKG_VERSION).tar.bz2
diff --git a/package/udev/Makefile b/package/udev/Makefile
index 75d04b791..d69a41330 100644
--- a/package/udev/Makefile
+++ b/package/udev/Makefile
@@ -9,7 +9,7 @@ PKG_RELEASE:= 1
PKG_MD5SUM:= bdf4617284be2ecac11767437417e209
PKG_DESCR:= Dynamic device management subsystem
PKG_SECTION:= utils
-PKG_BUILDDEP:= usbutils
+PKG_BUILDDEP:= usbutils glib
PKG_URL:= http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html
PKG_SITES:= ${MASTER_SITE_KERNEL:=utils/kernel/hotplug/}
diff --git a/target/avr32/sys-available/atmel-ngw100 b/target/avr32/sys-available/atmel-ngw100
index 77c865ad8..6f553ce27 100644
--- a/target/avr32/sys-available/atmel-ngw100
+++ b/target/avr32/sys-available/atmel-ngw100
@@ -6,3 +6,4 @@ config ADK_TARGET_SYSTEM_ATMEL_NGW100
select ADK_TOOLCHAIN_GCC_SJLJ
help
Support for ATMEL NGW100.
+
diff --git a/target/config/Config.in b/target/config/Config.in
index 81b225989..b6d56b051 100644
--- a/target/config/Config.in
+++ b/target/config/Config.in
@@ -328,6 +328,7 @@ config ADK_CPU_XSCALE
config ADK_TARGET_CPU_ARCH
string
default "x86_64" if ADK_CPU_X86_64
+ default "x86_64" if ADK_CPU_AMDFAM10
default "i486" if ADK_CPU_I486
default "i586" if ADK_CPU_I586
default "i686" if ADK_CPU_I686
diff --git a/target/linux/patches/3.0.4/bsd-compatibility.patch b/target/linux/patches/3.0.4/bsd-compatibility.patch
new file mode 100644
index 000000000..9e91a62de
--- /dev/null
+++ b/target/linux/patches/3.0.4/bsd-compatibility.patch
@@ -0,0 +1,2512 @@
+diff -Nur linux-2.6.36.orig/scripts/Makefile.lib linux-2.6.36/scripts/Makefile.lib
+--- linux-2.6.36.orig/scripts/Makefile.lib 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/scripts/Makefile.lib 2010-11-28 18:34:22.000000000 +0100
+@@ -216,7 +216,12 @@
+ size_append = printf $(shell \
+ dec_size=0; \
+ for F in $1; do \
+- fsize=$$(stat -c "%s" $$F); \
++ if stat -qs .>/dev/null 2>&1; then \
++ statcmd='stat -f %z'; \
++ else \
++ statcmd='stat -c %s'; \
++ fi; \
++ fsize=$$($$statcmd $$F); \
+ dec_size=$$(expr $$dec_size + $$fsize); \
+ done; \
+ printf "%08x\n" $$dec_size | \
+diff -Nur linux-2.6.36.orig/scripts/mod/mk_elfconfig.c linux-2.6.36/scripts/mod/mk_elfconfig.c
+--- linux-2.6.36.orig/scripts/mod/mk_elfconfig.c 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/scripts/mod/mk_elfconfig.c 2010-11-28 18:33:24.000000000 +0100
+@@ -1,7 +1,18 @@
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <string.h>
+-#include <elf.h>
++
++#define EI_NIDENT (16)
++#define ELFMAG "\177ELF"
++
++#define SELFMAG 4
++#define EI_CLASS 4
++#define ELFCLASS32 1 /* 32-bit objects */
++#define ELFCLASS64 2 /* 64-bit objects */
++
++#define EI_DATA 5 /* Data encoding byte index */
++#define ELFDATA2LSB 1 /* 2's complement, little endian */
++#define ELFDATA2MSB 2 /* 2's complement, big endian */
+
+ int
+ main(int argc, char **argv)
+diff -Nur linux-2.6.36.orig/scripts/mod/modpost.h linux-2.6.36/scripts/mod/modpost.h
+--- linux-2.6.36.orig/scripts/mod/modpost.h 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/scripts/mod/modpost.h 2010-11-28 18:33:24.000000000 +0100
+@@ -7,7 +7,2453 @@
+ #include <sys/mman.h>
+ #include <fcntl.h>
+ #include <unistd.h>
+-#include <elf.h>
++
++
++/* This file defines standard ELF types, structures, and macros.
++ Copyright (C) 1995-1999,2000,2001,2002,2003 Free Software Foundation, Inc.
++ This file is part of the GNU C Library.
++
++ The GNU C Library is free software; you can redistribute it and/or
++ modify it under the terms of the GNU Lesser General Public
++ License as published by the Free Software Foundation; either
++ version 2.1 of the License, or (at your option) any later version.
++
++ The GNU C Library is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ Lesser General Public License for more details.
++
++ You should have received a copy of the GNU Lesser General Public
++ License along with the GNU C Library; if not, write to the Free
++ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++ 02111-1307 USA. */
++
++#ifndef _ELF_H
++#define _ELF_H 1
++
++__BEGIN_DECLS
++
++/* Standard ELF types. */
++
++#include <stdint.h>
++
++/* Type for a 16-bit quantity. */
++typedef uint16_t Elf32_Half;
++typedef uint16_t Elf64_Half;
++
++/* Types for signed and unsigned 32-bit quantities. */
++typedef uint32_t Elf32_Word;
++typedef int32_t Elf32_Sword;
++typedef uint32_t Elf64_Word;
++typedef int32_t Elf64_Sword;
++
++/* Types for signed and unsigned 64-bit quantities. */
++typedef uint64_t Elf32_Xword;
++typedef int64_t Elf32_Sxword;
++typedef uint64_t Elf64_Xword;
++typedef int64_t Elf64_Sxword;
++
++/* Type of addresses. */
++typedef uint32_t Elf32_Addr;
++typedef uint64_t Elf64_Addr;
++
++/* Type of file offsets. */
++typedef uint32_t Elf32_Off;
++typedef uint64_t Elf64_Off;
++
++/* Type for section indices, which are 16-bit quantities. */
++typedef uint16_t Elf32_Section;
++typedef uint16_t Elf64_Section;
++
++/* Type for version symbol information. */
++typedef Elf32_Half Elf32_Versym;
++typedef Elf64_Half Elf64_Versym;
++
++
++/* The ELF file header. This appears at the start of every ELF file. */
++
++#define EI_NIDENT (16)
++
++typedef struct
++{
++ unsigned char e_ident[EI_NIDENT]; /* Magic number and other info */
++ Elf32_Half e_type; /* Object file type */
++ Elf32_Half e_machine; /* Architecture */
++ Elf32_Word e_version; /* Object file version */
++ Elf32_Addr e_entry; /* Entry point virtual address */
++ Elf32_Off e_phoff; /* Program header table file offset */
++ Elf32_Off e_shoff; /* Section header table file offset */
++ Elf32_Word e_flags; /* Processor-specific flags */
++ Elf32_Half e_ehsize; /* ELF header size in bytes */
++ Elf32_Half e_phentsize; /* Program header table entry size */
++ Elf32_Half e_phnum; /* Program header table entry count */
++ Elf32_Half e_shentsize; /* Section header table entry size */
++ Elf32_Half e_shnum; /* Section header table entry count */
++ Elf32_Half e_shstrndx; /* Section header string table index */
++} Elf32_Ehdr;
++
++typedef struct
++{
++ unsigned char e_ident[EI_NIDENT]; /* Magic number and other info */
++ Elf64_Half e_type; /* Object file type */
++ Elf64_Half e_machine; /* Architecture */
++ Elf64_Word e_version; /* Object file version */
++ Elf64_Addr e_entry; /* Entry point virtual address */
++ Elf64_Off e_phoff; /* Program header table file offset */
++ Elf64_Off e_shoff; /* Section header table file offset */
++ Elf64_Word e_flags; /* Processor-specific flags */
++ Elf64_Half e_ehsize; /* ELF header size in bytes */
++ Elf64_Half e_phentsize; /* Program header table entry size */
++ Elf64_Half e_phnum; /* Program header table entry count */
++ Elf64_Half e_shentsize; /* Section header table entry size */
++ Elf64_Half e_shnum; /* Section header table entry count */
++ Elf64_Half e_shstrndx; /* Section header string table index */
++} Elf64_Ehdr;
++
++/* Fields in the e_ident array. The EI_* macros are indices into the
++ array. The macros under each EI_* macro are the values the byte
++ may have. */
++
++#define EI_MAG0 0 /* File identification byte 0 index */
++#define ELFMAG0 0x7f /* Magic number byte 0 */
++
++#define EI_MAG1 1 /* File identification byte 1 index */
++#define ELFMAG1 'E' /* Magic number byte 1 */
++
++#define EI_MAG2 2 /* File identification byte 2 index */
++#define ELFMAG2 'L' /* Magic number byte 2 */
++
++#define EI_MAG3 3 /* File identification byte 3 index */
++#define ELFMAG3 'F' /* Magic number byte 3 */
++
++/* Conglomeration of the identification bytes, for easy testing as a word. */
++#define ELFMAG "\177ELF"
++#define SELFMAG 4
++
++#define EI_CLASS 4 /* File class byte index */
++#define ELFCLASSNONE 0 /* Invalid class */
++#define ELFCLASS32 1 /* 32-bit objects */
++#define ELFCLASS64 2 /* 64-bit objects */
++#define ELFCLASSNUM 3
++
++#define EI_DATA 5 /* Data encoding byte index */
++#define ELFDATANONE 0 /* Invalid data encoding */
++#define ELFDATA2LSB 1 /* 2's complement, little endian */
++#define ELFDATA2MSB 2 /* 2's complement, big endian */
++#define ELFDATANUM 3
++
++#define EI_VERSION 6 /* File version byte index */
++ /* Value must be EV_CURRENT */
++
++#define EI_OSABI 7 /* OS ABI identification */
++#define ELFOSABI_NONE 0 /* UNIX System V ABI */
++#define ELFOSABI_SYSV 0 /* Alias. */
++#define ELFOSABI_HPUX 1 /* HP-UX */
++#define ELFOSABI_NETBSD 2 /* NetBSD. */
++#define ELFOSABI_LINUX 3 /* Linux. */
++#define ELFOSABI_SOLARIS 6 /* Sun Solaris. */
++#define ELFOSABI_AIX 7 /* IBM AIX. */
++#define ELFOSABI_IRIX 8 /* SGI Irix. */
++#define ELFOSABI_FREEBSD 9 /* FreeBSD. */
++#define ELFOSABI_TRU64 10 /* Compaq TRU64 UNIX. */
++#define ELFOSABI_MODESTO 11 /* Novell Modesto. */
++#define ELFOSABI_OPENBSD 12 /* OpenBSD. */
++#define ELFOSABI_ARM 97 /* ARM */
++#define ELFOSABI_STANDALONE 255 /* Standalone (embedded) application */
++
++#define EI_ABIVERSION 8 /* ABI version */
++
++#define EI_PAD 9 /* Byte index of padding bytes */
++
++/* Legal values for e_type (object file type). */
++
++#define ET_NONE 0 /* No file type */
++#define ET_REL 1 /* Relocatable file */
++#define ET_EXEC 2 /* Executable file */
++#define ET_DYN 3 /* Shared object file */
++#define ET_CORE 4 /* Core file */
++#define ET_NUM 5 /* Number of defined types */
++#define ET_LOOS 0xfe00 /* OS-specific range start */
++#define ET_HIOS 0xfeff /* OS-specific range end */
++#define ET_LOPROC 0xff00 /* Processor-specific range start */
++#define ET_HIPROC 0xffff /* Processor-specific range end */
++
++/* Legal values for e_machine (architecture). */
++
++#define EM_NONE 0 /* No machine */
++#define EM_M32 1 /* AT&T WE 32100 */
++#define EM_SPARC 2 /* SUN SPARC */
++#define EM_386 3 /* Intel 80386 */
++#define EM_68K 4 /* Motorola m68k family */
++#define EM_88K 5 /* Motorola m88k family */
++#define EM_860 7 /* Intel 80860 */
++#define EM_MIPS 8 /* MIPS R3000 big-endian */
++#define EM_S370 9 /* IBM System/370 */
++#define EM_MIPS_RS3_LE 10 /* MIPS R3000 little-endian */
++
++#define EM_PARISC 15 /* HPPA */
++#define EM_VPP500 17 /* Fujitsu VPP500 */
++#define EM_SPARC32PLUS 18 /* Sun's "v8plus" */
++#define EM_960 19 /* Intel 80960 */
++#define EM_PPC 20 /* PowerPC */
++#define EM_PPC64 21 /* PowerPC 64-bit */
++#define EM_S390 22 /* IBM S390 */
++
++#define EM_V800 36 /* NEC V800 series */
++#define EM_FR20 37 /* Fujitsu FR20 */
++#define EM_RH32 38 /* TRW RH-32 */
++#define EM_RCE 39 /* Motorola RCE */
++#define EM_ARM 40 /* ARM */
++#define EM_FAKE_ALPHA 41 /* Digital Alpha */
++#define EM_SH 42 /* Hitachi SH */
++#define EM_SPARCV9 43 /* SPARC v9 64-bit */
++#define EM_TRICORE 44 /* Siemens Tricore */
++#define EM_ARC 45 /* Argonaut RISC Core */
++#define EM_H8_300 46 /* Hitachi H8/300 */
++#define EM_H8_300H 47 /* Hitachi H8/300H */
++#define EM_H8S 48 /* Hitachi H8S */
++#define EM_H8_500 49 /* Hitachi H8/500 */
++#define EM_IA_64 50 /* Intel Merced */
++#define EM_MIPS_X 51 /* Stanford MIPS-X */
++#define EM_COLDFIRE 52 /* Motorola Coldfire */
++#define EM_68HC12 53 /* Motorola M68HC12 */
++#define EM_MMA 54 /* Fujitsu MMA Multimedia Accelerator*/
++#define EM_PCP 55 /* Siemens PCP */
++#define EM_NCPU 56 /* Sony nCPU embeeded RISC */
++#define EM_NDR1 57 /* Denso NDR1 microprocessor */
++#define EM_STARCORE 58 /* Motorola Start*Core processor */
++#define EM_ME16 59 /* Toyota ME16 processor */
++#define EM_ST100 60 /* STMicroelectronic ST100 processor */
++#define EM_TINYJ 61 /* Advanced Logic Corp. Tinyj emb.fam*/
++#define EM_X86_64 62 /* AMD x86-64 architecture */
++#define EM_PDSP 63 /* Sony DSP Processor */
++
++#define EM_FX66 66 /* Siemens FX66 microcontroller */
++#define EM_ST9PLUS 67 /* STMicroelectronics ST9+ 8/16 mc */
++#define EM_ST7 68 /* STmicroelectronics ST7 8 bit mc */
++#define EM_68HC16 69 /* Motorola MC68HC16 microcontroller */
++#define EM_68HC11 70 /* Motorola MC68HC11 microcontroller */
++#define EM_68HC08 71 /* Motorola MC68HC08 microcontroller */
++#define EM_68HC05 72 /* Motorola MC68HC05 microcontroller */
++#define EM_SVX 73 /* Silicon Graphics SVx */
++#define EM_ST19 74 /* STMicroelectronics ST19 8 bit mc */
++#define EM_VAX 75 /* Digital VAX */
++#define EM_CRIS 76 /* Axis Communications 32-bit embedded processor */
++#define EM_JAVELIN 77 /* Infineon Technologies 32-bit embedded processor */
++#define EM_FIREPATH 78 /* Element 14 64-bit DSP Processor */
++#define EM_ZSP 79 /* LSI Logic 16-bit DSP Processor */
++#define EM_MMIX 80 /* Donald Knuth's educational 64-bit processor */
++#define EM_HUANY 81 /* Harvard University machine-independent object files */
++#define EM_PRISM 82 /* SiTera Prism */
++#define EM_AVR 83 /* Atmel AVR 8-bit microcontroller */
++#define EM_FR30 84 /* Fujitsu FR30 */
++#define EM_D10V 85 /* Mitsubishi D10V */
++#define EM_D30V 86 /* Mitsubishi D30V */
++#define EM_V850 87 /* NEC v850 */
++#define EM_M32R 88 /* Mitsubishi M32R */
++#define EM_MN10300 89 /* Matsushita MN10300 */
++#define EM_MN10200 90 /* Matsushita MN10200 */
++#define EM_PJ 91 /* picoJava */
++#define EM_OPENRISC 92 /* OpenRISC 32-bit embedded processor */
++#define EM_ARC_A5 93 /* ARC Cores Tangent-A5 */
++#define EM_XTENSA 94 /* Tensilica Xtensa Architecture */
++#define EM_NUM 95
++
++/* If it is necessary to assign new unofficial EM_* values, please
++ pick large random numbers (0x8523, 0xa7f2, etc.) to minimize the
++ chances of collision with official or non-GNU unofficial values. */
++
++#define EM_ALPHA 0x9026
++
++/* Legal values for e_version (version). */
++
++#define EV_NONE 0 /* Invalid ELF version */
++#define EV_CURRENT 1 /* Current version */
++#define EV_NUM 2
++
++/* Section header. */
++
++typedef struct
++{
++ Elf32_Word sh_name; /* Section name (string tbl index) */
++ Elf32_Word sh_type; /* Section type */
++ Elf32_Word sh_flags; /* Section flags */
++ Elf32_Addr sh_addr; /* Section virtual addr at execution */
++ Elf32_Off sh_offset; /* Section file offset */
++ Elf32_Word sh_size; /* Section size in bytes */
++ Elf32_Word sh_link; /* Link to another section */
++ Elf32_Word sh_info; /* Additional section information */
++ Elf32_Word sh_addralign; /* Section alignment */
++ Elf32_Word sh_entsize; /* Entry size if section holds table */
++} Elf32_Shdr;
++
++typedef struct
++{
++ Elf64_Word sh_name; /* Section name (string tbl index) */
++ Elf64_Word sh_type; /* Section type */
++ Elf64_Xword sh_flags; /* Section flags */
++ Elf64_Addr sh_addr; /* Section virtual addr at execution */
++ Elf64_Off sh_offset; /* Section file offset */
++ Elf64_Xword sh_size; /* Section size in bytes */
++ Elf64_Word sh_link; /* Link to another section */
++ Elf64_Word sh_info; /* Additional section information */
++ Elf64_Xword sh_addralign; /* Section alignment */
++ Elf64_Xword sh_entsize; /* Entry size if section holds table */
++} Elf64_Shdr;
++
++/* Special section indices. */
++
++#define SHN_UNDEF 0 /* Undefined section */
++#define SHN_LORESERVE 0xff00 /* Start of reserved indices */
++#define SHN_LOPROC 0xff00 /* Start of processor-specific */
++#define SHN_HIPROC 0xff1f /* End of processor-specific */
++#define SHN_LOOS 0xff20 /* Start of OS-specific */
++#define SHN_HIOS 0xff3f /* End of OS-specific */
++#define SHN_ABS 0xfff1 /* Associated symbol is absolute */
++#define SHN_COMMON 0xfff2 /* Associated symbol is common */
++#define SHN_XINDEX 0xffff /* Index is in extra table. */
++#define SHN_HIRESERVE 0xffff /* End of reserved indices */
++
++/* Legal values for sh_type (section type). */
++
++#define SHT_NULL 0 /* Section header table entry unused */
++#define SHT_PROGBITS 1 /* Program data */
++#define SHT_SYMTAB 2 /* Symbol table */
++#define SHT_STRTAB 3 /* String table */
++#define SHT_RELA 4 /* Relocation entries with addends */
++#define SHT_HASH 5 /* Symbol hash table */
++#define SHT_DYNAMIC 6 /* Dynamic linking information */
++#define SHT_NOTE 7 /* Notes */
++#define SHT_NOBITS 8 /* Program space with no data (bss) */
++#define SHT_REL 9 /* Relocation entries, no addends */
++#define SHT_SHLIB 10 /* Reserved */
++#define SHT_DYNSYM 11 /* Dynamic linker symbol table */
++#define SHT_INIT_ARRAY 14 /* Array of constructors */
++#define SHT_FINI_ARRAY 15 /* Array of destructors */
++#define SHT_PREINIT_ARRAY 16 /* Array of pre-constructors */
++#define SHT_GROUP 17 /* Section group */
++#define SHT_SYMTAB_SHNDX 18 /* Extended section indeces */
++#define SHT_NUM 19 /* Number of defined types. */
++#define SHT_LOOS 0x60000000 /* Start OS-specific */
++#define SHT_GNU_LIBLIST 0x6ffffff7 /* Prelink library list */
++#define SHT_CHECKSUM 0x6ffffff8 /* Checksum for DSO content. */
++#define SHT_LOSUNW 0x6ffffffa /* Sun-specific low bound. */
++#define SHT_SUNW_move 0x6ffffffa
++#define SHT_SUNW_COMDAT 0x6ffffffb
++#define SHT_SUNW_syminfo 0x6ffffffc
++#define SHT_GNU_verdef 0x6ffffffd /* Version definition section. */
++#define SHT_GNU_verneed 0x6ffffffe /* Version needs section. */
++#define SHT_GNU_versym 0x6fffffff /* Version symbol table. */
++#define SHT_HISUNW 0x6fffffff /* Sun-specific high bound. */
++#define SHT_HIOS 0x6fffffff /* End OS-specific type */
++#define SHT_LOPROC 0x70000000 /* Start of processor-specific */
++#define SHT_HIPROC 0x7fffffff /* End of processor-specific */
++#define SHT_LOUSER 0x80000000 /* Start of application-specific */
++#define SHT_HIUSER 0x8fffffff /* End of application-specific */
++
++/* Legal values for sh_flags (section flags). */
++
++#define SHF_WRITE (1 << 0) /* Writable */
++#define SHF_ALLOC (1 << 1) /* Occupies memory during execution */
++#define SHF_EXECINSTR (1 << 2) /* Executable */
++#define SHF_MERGE (1 << 4) /* Might be merged */
++#define SHF_STRINGS (1 << 5) /* Contains nul-terminated strings */
++#define SHF_INFO_LINK (1 << 6) /* `sh_info' contains SHT index */
++#define SHF_LINK_ORDER (1 << 7) /* Preserve order after combining */
++#define SHF_OS_NONCONFORMING (1 << 8) /* Non-standard OS specific handling
++ required */
++#define SHF_GROUP (1 << 9) /* Section is member of a group. */
++#define SHF_TLS (1 << 10) /* Section hold thread-local data. */
++#define SHF_MASKOS 0x0ff00000 /* OS-specific. */
++#define SHF_MASKPROC 0xf0000000 /* Processor-specific */
++
++/* Section group handling. */
++#define GRP_COMDAT 0x1 /* Mark group as COMDAT. */
++
++/* Symbol table entry. */
++
++typedef struct
++{
++ Elf32_Word st_name; /* Symbol name (string tbl index) */
++ Elf32_Addr st_value; /* Symbol value */
++ Elf32_Word st_size; /* Symbol size */
++ unsigned char st_info; /* Symbol type and binding */
++ unsigned char st_other; /* Symbol visibility */
++ Elf32_Section st_shndx; /* Section index */
++} Elf32_Sym;
++
++typedef struct
++{
++ Elf64_Word st_name; /* Symbol name (string tbl index) */
++ unsigned char st_info; /* Symbol type and binding */
++ unsigned char st_other; /* Symbol visibility */
++ Elf64_Section st_shndx; /* Section index */
++ Elf64_Addr st_value; /* Symbol value */
++ Elf64_Xword st_size; /* Symbol size */
++} Elf64_Sym;
++
++/* The syminfo section if available contains additional information about
++ every dynamic symbol. */
++
++typedef struct
++{
++ Elf32_Half si_boundto; /* Direct bindings, symbol bound to */
++ Elf32_Half si_flags; /* Per symbol flags */
++} Elf32_Syminfo;
++
++typedef struct
++{
++ Elf64_Half si_boundto; /* Direct bindings, symbol bound to */
++ Elf64_Half si_flags; /* Per symbol flags */
++} Elf64_Syminfo;
++
++/* Possible values for si_boundto. */
++#define SYMINFO_BT_SELF 0xffff /* Symbol bound to self */
++#define SYMINFO_BT_PARENT 0xfffe /* Symbol bound to parent */
++#define SYMINFO_BT_LOWRESERVE 0xff00 /* Beginning of reserved entries */
++
++/* Possible bitmasks for si_flags. */
++#define SYMINFO_FLG_DIRECT 0x0001 /* Direct bound symbol */
++#define SYMINFO_FLG_PASSTHRU 0x0002 /* Pass-thru symbol for translator */
++#define SYMINFO_FLG_COPY 0x0004 /* Symbol is a copy-reloc */
++#define SYMINFO_FLG_LAZYLOAD 0x0008 /* Symbol bound to object to be lazy
++ loaded */
++/* Syminfo version values. */
++#define SYMINFO_NONE 0
++#define SYMINFO_CURRENT 1
++#define SYMINFO_NUM 2
++
++
++/* How to extract and insert information held in the st_info field. */
++
++#define ELF32_ST_BIND(val) (((unsigned char) (val)) >> 4)
++#define ELF32_ST_TYPE(val) ((val) & 0xf)
++#define ELF32_ST_INFO(bind, type) (((bind) << 4) + ((type) & 0xf))
++
++/* Both Elf32_Sym and Elf64_Sym use the same one-byte st_info field. */
++#define ELF64_ST_BIND(val) ELF32_ST_BIND (val)
++#define ELF64_ST_TYPE(val) ELF32_ST_TYPE (val)
++#define ELF64_ST_INFO(bind, type) ELF32_ST_INFO ((bind), (type))
++
++/* Legal values for ST_BIND subfield of st_info (symbol binding). */
++
++#define STB_LOCAL 0 /* Local symbol */
++#define STB_GLOBAL 1 /* Global symbol */
++#define STB_WEAK 2 /* Weak symbol */
++#define STB_NUM 3 /* Number of defined types. */
++#define STB_LOOS 10 /* Start of OS-specific */
++#define STB_HIOS 12 /* End of OS-specific */
++#define STB_LOPROC 13 /* Start of processor-specific */
++#define STB_HIPROC 15 /* End of processor-specific */
++
++/* Legal values for ST_TYPE subfield of st_info (symbol type). */
++
++#define STT_NOTYPE 0 /* Symbol type is unspecified */
++#define STT_OBJECT 1 /* Symbol is a data object */
++#define STT_FUNC 2 /* Symbol is a code object */
++#define STT_SECTION 3 /* Symbol associated with a section */
++#define STT_FILE 4 /* Symbol's name is file name */
++#define STT_COMMON 5 /* Symbol is a common data object */
++#define STT_TLS 6 /* Symbol is thread-local data object*/
++#define STT_NUM 7 /* Number of defined types. */
++#define STT_LOOS 10 /* Start of OS-specific */
++#define STT_HIOS 12 /* End of OS-specific */
++#define STT_LOPROC 13 /* Start of processor-specific */
++#define STT_HIPROC 15 /* End of processor-specific */
++
++
++/* Symbol table indices are found in the hash buckets and chain table
++ of a symbol hash table section. This special index value indicates
++ the end of a chain, meaning no further symbols are found in that bucket. */
++
++#define STN_UNDEF 0 /* End of a chain. */
++
++
++/* How to extract and insert information held in the st_other field. */
++
++#define ELF32_ST_VISIBILITY(o) ((o) & 0x03)
++
++/* For ELF64 the definitions are the same. */
++#define ELF64_ST_VISIBILITY(o) ELF32_ST_VISIBILITY (o)
++
++/* Symbol visibility specification encoded in the st_other field. */
++#define STV_DEFAULT 0 /* Default symbol visibility rules */
++#define STV_INTERNAL 1 /* Processor specific hidden class */
++#define STV_HIDDEN 2 /* Sym unavailable in other modules */
++#define STV_PROTECTED 3 /* Not preemptible, not exported */
++
++
++/* Relocation table entry without addend (in section of type SHT_REL). */
++
++typedef struct
++{
++ Elf32_Addr r_offset; /* Address */
++ Elf32_Word r_info; /* Relocation type and symbol index */
++} Elf32_Rel;
++
++/* I have seen two different definitions of the Elf64_Rel and
++ Elf64_Rela structures, so we'll leave them out until Novell (or
++ whoever) gets their act together. */
++/* The following, at least, is used on Sparc v9, MIPS, and Alpha. */
++
++typedef struct
++{
++ Elf64_Addr r_offset; /* Address */
++ Elf64_Xword r_info; /* Relocation type and symbol index */
++} Elf64_Rel;
++
++/* Relocation table entry with addend (in section of type SHT_RELA). */
++
++typedef struct
++{
++ Elf32_Addr r_offset; /* Address */
++ Elf32_Word r_info; /* Relocation type and symbol index */
++ Elf32_Sword r_addend; /* Addend */
++} Elf32_Rela;
++
++typedef struct
++{
++ Elf64_Addr r_offset; /* Address */
++ Elf64_Xword r_info; /* Relocation type and symbol index */
++ Elf64_Sxword r_addend; /* Addend */
++} Elf64_Rela;
++
++/* How to extract and insert information held in the r_info field. */
++
++#define ELF32_R_SYM(val) ((val) >> 8)
++#define ELF32_R_TYPE(val) ((val) & 0xff)
++#define ELF32_R_INFO(sym, type) (((sym) << 8) + ((type) & 0xff))
++
++#define ELF64_R_SYM(i) ((i) >> 32)
++#define ELF64_R_TYPE(i) ((i) & 0xffffffff)
++#define ELF64_R_INFO(sym,type) ((((Elf64_Xword) (sym)) << 32) + (type))
++
++/* Program segment header. */
++
++typedef struct
++{
++ Elf32_Word p_type; /* Segment type */
++ Elf32_Off p_offset; /* Segment file offset */
++ Elf32_Addr p_vaddr; /* Segment virtual address */
++ Elf32_Addr p_paddr; /* Segment physical address */
++ Elf32_Word p_filesz; /* Segment size in file */
++ Elf32_Word p_memsz; /* Segment size in memory */
++ Elf32_Word p_flags; /* Segment flags */
++ Elf32_Word p_align; /* Segment alignment */
++} Elf32_Phdr;
++
++typedef struct
++{
++ Elf64_Word p_type; /* Segment type */
++ Elf64_Word p_flags; /* Segment flags */
++ Elf64_Off p_offset; /* Segment file offset */
++ Elf64_Addr p_vaddr; /* Segment virtual address */
++ Elf64_Addr p_paddr; /* Segment physical address */
++ Elf64_Xword p_filesz; /* Segment size in file */
++ Elf64_Xword p_memsz; /* Segment size in memory */
++ Elf64_Xword p_align; /* Segment alignment */
++} Elf64_Phdr;
++
++/* Legal values for p_type (segment type). */
++
++#define PT_NULL 0 /* Program header table entry unused */
++#define PT_LOAD 1 /* Loadable program segment */
++#define PT_DYNAMIC 2 /* Dynamic linking information */
++#define PT_INTERP 3 /* Program interpreter */
++#define PT_NOTE 4 /* Auxiliary information */
++#define PT_SHLIB 5 /* Reserved */
++#define PT_PHDR 6 /* Entry for header table itself */
++#define PT_TLS 7 /* Thread-local storage segment */
++#define PT_NUM 8 /* Number of defined types */
++#define PT_LOOS 0x60000000 /* Start of OS-specific */
++#define PT_GNU_EH_FRAME 0x6474e550 /* GCC .eh_frame_hdr segment */
++#define PT_GNU_STACK 0x6474e551 /* Indicates stack executability */
++#define PT_LOSUNW 0x6ffffffa
++#define PT_SUNWBSS 0x6ffffffa /* Sun Specific segment */
++#define PT_SUNWSTACK 0x6ffffffb /* Stack segment */
++#define PT_HISUNW 0x6fffffff
++#define PT_HIOS 0x6fffffff /* End of OS-specific */
++#define PT_LOPROC 0x70000000 /* Start of processor-specific */
++#define PT_HIPROC 0x7fffffff /* End of processor-specific */
++
++/* Legal values for p_flags (segment flags). */
++
++#define PF_X (1 << 0) /* Segment is executable */
++#define PF_W (1 << 1) /* Segment is writable */
++#define PF_R (1 << 2) /* Segment is readable */
++#define PF_MASKOS 0x0ff00000 /* OS-specific */
++#define PF_MASKPROC 0xf0000000 /* Processor-specific */
++
++/* Legal values for note segment descriptor types for core files. */
++
++#define NT_PRSTATUS 1 /* Contains copy of prstatus struct */
++#define NT_FPREGSET 2 /* Contains copy of fpregset struct */
++#define NT_PRPSINFO 3 /* Contains copy of prpsinfo struct */
++#define NT_PRXREG 4 /* Contains copy of prxregset struct */
++#define NT_TASKSTRUCT 4 /* Contains copy of task structure */
++#define NT_PLATFORM 5 /* String from sysinfo(SI_PLATFORM) */
++#define NT_AUXV 6 /* Contains copy of auxv array */
++#define NT_GWINDOWS 7 /* Contains copy of gwindows struct */
++#define NT_ASRS 8 /* Contains copy of asrset struct */
++#define NT_PSTATUS 10 /* Contains copy of pstatus struct */
++#define NT_PSINFO 13 /* Contains copy of psinfo struct */
++#define NT_PRCRED 14 /* Contains copy of prcred struct */
++#define NT_UTSNAME 15 /* Contains copy of utsname struct */
++#define NT_LWPSTATUS 16 /* Contains copy of lwpstatus struct */
++#define NT_LWPSINFO 17 /* Contains copy of lwpinfo struct */
++#define NT_PRFPXREG 20 /* Contains copy of fprxregset struct*/
++
++/* Legal values for the note segment descriptor types for object files. */
++
++#define NT_VERSION 1 /* Contains a version string. */
++
++
++/* Dynamic section entry. */
++
++typedef struct
++{
++ Elf32_Sword d_tag; /* Dynamic entry type */
++ union
++ {
++ Elf32_Word d_val; /* Integer value */
++ Elf32_Addr d_ptr; /* Address value */
++ } d_un;
++} Elf32_Dyn;
++
++typedef struct
++{
++ Elf64_Sxword d_tag; /* Dynamic entry type */
++ union
++ {
++ Elf64_Xword d_val; /* Integer value */
++ Elf64_Addr d_ptr; /* Address value */
++ } d_un;
++} Elf64_Dyn;
++
++/* Legal values for d_tag (dynamic entry type). */
++
++#define DT_NULL 0 /* Marks end of dynamic section */
++#define DT_NEEDED 1 /* Name of needed library */
++#define DT_PLTRELSZ 2 /* Size in bytes of PLT relocs */
++#define DT_PLTGOT 3 /* Processor defined value */
++#define DT_HASH 4 /* Address of symbol hash table */
++#define DT_STRTAB 5 /* Address of string table */
++#define DT_SYMTAB 6 /* Address of symbol table */
++#define DT_RELA 7 /* Address of Rela relocs */
++#define DT_RELASZ 8 /* Total size of Rela relocs */
++#define DT_RELAENT 9 /* Size of one Rela reloc */
++#define DT_STRSZ 10 /* Size of string table */
++#define DT_SYMENT 11 /* Size of one symbol table entry */
++#define DT_INIT 12 /* Address of init function */
++#define DT_FINI 13 /* Address of termination function */
++#define DT_SONAME 14 /* Name of shared object */
++#define DT_RPATH 15 /* Library search path (deprecated) */
++#define DT_SYMBOLIC 16 /* Start symbol search here */
++#define DT_REL 17 /* Address of Rel relocs */
++#define DT_RELSZ 18 /* Total size of Rel relocs */
++#define DT_RELENT 19 /* Size of one Rel reloc */
++#define DT_PLTREL 20 /* Type of reloc in PLT */
++#define DT_DEBUG 21 /* For debugging; unspecified */
++#define DT_TEXTREL 22 /* Reloc might modify .text */
++#define DT_JMPREL 23 /* Address of PLT relocs */
++#define DT_BIND_NOW 24 /* Process relocations of object */
++#define DT_INIT_ARRAY 25 /* Array with addresses of init fct */
++#define DT_FINI_ARRAY 26 /* Array with addresses of fini fct */
++#define DT_INIT_ARRAYSZ 27 /* Size in bytes of DT_INIT_ARRAY */
++#define DT_FINI_ARRAYSZ 28 /* Size in bytes of DT_FINI_ARRAY */
++#define DT_RUNPATH 29 /* Library search path */
++#define DT_FLAGS 30 /* Flags for the object being loaded */
++#define DT_ENCODING 32 /* Start of encoded range */
++#define DT_PREINIT_ARRAY 32 /* Array with addresses of preinit fct*/
++#define DT_PREINIT_ARRAYSZ 33 /* size in bytes of DT_PREINIT_ARRAY */
++#define DT_NUM 34 /* Number used */
++#define DT_LOOS 0x6000000d /* Start of OS-specific */
++#define DT_HIOS 0x6ffff000 /* End of OS-specific */
++#define DT_LOPROC 0x70000000 /* Start of processor-specific */
++#define DT_HIPROC 0x7fffffff /* End of processor-specific */
++#define DT_PROCNUM DT_MIPS_NUM /* Most used by any processor */
++
++/* DT_* entries which fall between DT_VALRNGHI & DT_VALRNGLO use the
++ Dyn.d_un.d_val field of the Elf*_Dyn structure. This follows Sun's
++ approach. */
++#define DT_VALRNGLO 0x6ffffd00
++#define DT_GNU_PRELINKED 0x6ffffdf5 /* Prelinking timestamp */
++#define DT_GNU_CONFLICTSZ 0x6ffffdf6 /* Size of conflict section */
++#define DT_GNU_LIBLISTSZ 0x6ffffdf7 /* Size of library list */
++#define DT_CHECKSUM 0x6ffffdf8
++#define DT_PLTPADSZ 0x6ffffdf9
++#define DT_MOVEENT 0x6ffffdfa
++#define DT_MOVESZ 0x6ffffdfb
++#define DT_FEATURE_1 0x6ffffdfc /* Feature selection (DTF_*). */
++#define DT_POSFLAG_1 0x6ffffdfd /* Flags for DT_* entries, effecting
++ the following DT_* entry. */
++#define DT_SYMINSZ 0x6ffffdfe /* Size of syminfo table (in bytes) */
++#define DT_SYMINENT 0x6ffffdff /* Entry size of syminfo */
++#define DT_VALRNGHI 0x6ffffdff
++#define DT_VALTAGIDX(tag) (DT_VALRNGHI - (tag)) /* Reverse order! */
++#define DT_VALNUM 12
++
++/* DT_* entries which fall between DT_ADDRRNGHI & DT_ADDRRNGLO use the
++ Dyn.d_un.d_ptr field of the Elf*_Dyn structure.
++
++ If any adjustment is made to the ELF object after it has been
++ built these entries will need to be adjusted. */
++#define DT_ADDRRNGLO 0x6ffffe00
++#define DT_GNU_CONFLICT 0x6ffffef8 /* Start of conflict section */
++#define DT_GNU_LIBLIST 0x6ffffef9 /* Library list */
++#define DT_CONFIG 0x6ffffefa /* Configuration information. */
++#define DT_DEPAUDIT 0x6ffffefb /* Dependency auditing. */
++#define DT_AUDIT 0x6ffffefc /* Object auditing. */
++#define DT_PLTPAD 0x6ffffefd /* PLT padding. */
++#define DT_MOVETAB 0x6ffffefe /* Move table. */
++#define DT_SYMINFO 0x6ffffeff /* Syminfo table. */
++#define DT_ADDRRNGHI 0x6ffffeff
++#define DT_ADDRTAGIDX(tag) (DT_ADDRRNGHI - (tag)) /* Reverse order! */
++#define DT_ADDRNUM 10
++
++/* The versioning entry types. The next are defined as part of the
++ GNU extension. */
++#define DT_VERSYM 0x6ffffff0
++
++#define DT_RELACOUNT 0x6ffffff9
++#define DT_RELCOUNT 0x6ffffffa
++
++/* These were chosen by Sun. */
++#define DT_FLAGS_1 0x6ffffffb /* State flags, see DF_1_* below. */
++#define DT_VERDEF 0x6ffffffc /* Address of version definition
++ table */
++#define DT_VERDEFNUM 0x6ffffffd /* Number of version definitions */
++#define DT_VERNEED 0x6ffffffe /* Address of table with needed
++ versions */
++#define DT_VERNEEDNUM 0x6fffffff /* Number of needed versions */
++#define DT_VERSIONTAGIDX(tag) (DT_VERNEEDNUM - (tag)) /* Reverse order! */
++#define DT_VERSIONTAGNUM 16
++
++/* Sun added these machine-independent extensions in the "processor-specific"
++ range. Be compatible. */
++#define DT_AUXILIARY 0x7ffffffd /* Shared object to load before self */
++#define DT_FILTER 0x7fffffff /* Shared object to get values from */
++#define DT_EXTRATAGIDX(tag) ((Elf32_Word)-((Elf32_Sword) (tag) <<1>>1)-1)
++#define DT_EXTRANUM 3
++
++/* Values of `d_un.d_val' in the DT_FLAGS entry. */
++#define DF_ORIGIN 0x00000001 /* Object may use DF_ORIGIN */
++#define DF_SYMBOLIC 0x00000002 /* Symbol resolutions starts here */
++#define DF_TEXTREL 0x00000004 /* Object contains text relocations */
++#define DF_BIND_NOW 0x00000008 /* No lazy binding for this object */
++#define DF_STATIC_TLS 0x00000010 /* Module uses the static TLS model */
++
++/* State flags selectable in the `d_un.d_val' element of the DT_FLAGS_1
++ entry in the dynamic section. */
++#define DF_1_NOW 0x00000001 /* Set RTLD_NOW for this object. */
++#define DF_1_GLOBAL 0x00000002 /* Set RTLD_GLOBAL for this object. */
++#define DF_1_GROUP 0x00000004 /* Set RTLD_GROUP for this object. */
++#define DF_1_NODELETE 0x00000008 /* Set RTLD_NODELETE for this object.*/
++#define DF_1_LOADFLTR 0x00000010 /* Trigger filtee loading at runtime.*/
++#define DF_1_INITFIRST 0x00000020 /* Set RTLD_INITFIRST for this object*/
++#define DF_1_NOOPEN 0x00000040 /* Set RTLD_NOOPEN for this object. */
++#define DF_1_ORIGIN 0x00000080 /* $ORIGIN must be handled. */
++#define DF_1_DIRECT 0x00000100 /* Direct binding enabled. */
++#define DF_1_TRANS 0x00000200
++#define DF_1_INTERPOSE 0x00000400 /* Object is used to interpose. */
++#define DF_1_NODEFLIB 0x00000800 /* Ignore default lib search path. */
++#define DF_1_NODUMP 0x00001000 /* Object can't be dldump'ed. */
++#define DF_1_CONFALT 0x00002000 /* Configuration alternative created.*/
++#define DF_1_ENDFILTEE 0x00004000 /* Filtee terminates filters search. */
++#define DF_1_DISPRELDNE 0x00008000 /* Disp reloc applied at build time. */
++#define DF_1_DISPRELPND 0x00010000 /* Disp reloc applied at run-time. */
++
++/* Flags for the feature selection in DT_FEATURE_1. */
++#define DTF_1_PARINIT 0x00000001
++#define DTF_1_CONFEXP 0x00000002
++
++/* Flags in the DT_POSFLAG_1 entry effecting only the next DT_* entry. */
++#define DF_P1_LAZYLOAD 0x00000001 /* Lazyload following object. */
++#define DF_P1_GROUPPERM 0x00000002 /* Symbols from next object are not
++ generally available. */
++
++/* Version definition sections. */
++
++typedef struct
++{
++ Elf32_Half vd_version; /* Version revision */
++ Elf32_Half vd_flags; /* Version information */
++ Elf32_Half vd_ndx; /* Version Index */
++ Elf32_Half vd_cnt; /* Number of associated aux entries */
++ Elf32_Word vd_hash; /* Version name hash value */
++ Elf32_Word vd_aux; /* Offset in bytes to verdaux array */
++ Elf32_Word vd_next; /* Offset in bytes to next verdef
++ entry */
++} Elf32_Verdef;
++
++typedef struct
++{
++ Elf64_Half vd_version; /* Version revision */
++ Elf64_Half vd_flags; /* Version information */
++ Elf64_Half vd_ndx; /* Version Index */
++ Elf64_Half vd_cnt; /* Number of associated aux entries */
++ Elf64_Word vd_hash; /* Version name hash value */
++ Elf64_Word vd_aux; /* Offset in bytes to verdaux array */
++ Elf64_Word vd_next; /* Offset in bytes to next verdef
++ entry */
++} Elf64_Verdef;
++
++
++/* Legal values for vd_version (version revision). */
++#define VER_DEF_NONE 0 /* No version */
++#define VER_DEF_CURRENT 1 /* Current version */
++#define VER_DEF_NUM 2 /* Given version number */
++
++/* Legal values for vd_flags (version information flags). */
++#define VER_FLG_BASE 0x1 /* Version definition of file itself */
++#define VER_FLG_WEAK 0x2 /* Weak version identifier */
++
++/* Versym symbol index values. */
++#define VER_NDX_LOCAL 0 /* Symbol is local. */
++#define VER_NDX_GLOBAL 1 /* Symbol is global. */
++#define VER_NDX_LORESERVE 0xff00 /* Beginning of reserved entries. */
++#define VER_NDX_ELIMINATE 0xff01 /* Symbol is to be eliminated. */
++
++/* Auxialiary version information. */
++
++typedef struct
++{
++ Elf32_Word vda_name; /* Version or dependency names */
++ Elf32_Word vda_next; /* Offset in bytes to next verdaux
++ entry */
++} Elf32_Verdaux;
++
++typedef struct
++{
++ Elf64_Word vda_name; /* Version or dependency names */
++ Elf64_Word vda_next; /* Offset in bytes to next verdaux
++ entry */
++} Elf64_Verdaux;
++
++
++/* Version dependency section. */
++
++typedef struct
++{
++ Elf32_Half vn_version; /* Version of structure */
++ Elf32_Half vn_cnt; /* Number of associated aux entries */
++ Elf32_Word vn_file; /* Offset of filename for this
++ dependency */
++ Elf32_Word vn_aux; /* Offset in bytes to vernaux array */
++ Elf32_Word vn_next; /* Offset in bytes to next verneed
++ entry */
++} Elf32_Verneed;
++
++typedef struct
++{
++ Elf64_Half vn_version; /* Version of structure */
++ Elf64_Half vn_cnt; /* Number of associated aux entries */
++ Elf64_Word vn_file; /* Offset of filename for this
++ dependency */
++ Elf64_Word vn_aux; /* Offset in bytes to vernaux array */
++ Elf64_Word vn_next; /* Offset in bytes to next verneed
++ entry */
++} Elf64_Verneed;
++
++
++/* Legal values for vn_version (version revision). */
++#define VER_NEED_NONE 0 /* No version */
++#define VER_NEED_CURRENT 1 /* Current version */
++#define VER_NEED_NUM 2 /* Given version number */
++
++/* Auxiliary needed version information. */
++
++typedef struct
++{
++ Elf32_Word vna_hash; /* Hash value of dependency name */
++ Elf32_Half vna_flags; /* Dependency specific information */
++ Elf32_Half vna_other; /* Unused */
++ Elf32_Word vna_name; /* Dependency name string offset */
++ Elf32_Word vna_next; /* Offset in bytes to next vernaux
++ entry */
++} Elf32_Vernaux;
++
++typedef struct
++{
++ Elf64_Word vna_hash; /* Hash value of dependency name */
++ Elf64_Half vna_flags; /* Dependency specific information */
++ Elf64_Half vna_other; /* Unused */
++ Elf64_Word vna_name; /* Dependency name string offset */
++ Elf64_Word vna_next; /* Offset in bytes to next vernaux
++ entry */
++} Elf64_Vernaux;
++
++
++/* Legal values for vna_flags. */
++#define VER_FLG_WEAK 0x2 /* Weak version identifier */
++
++
++/* Auxiliary vector. */
++
++/* This vector is normally only used by the program interpreter. The
++ usual definition in an ABI supplement uses the name auxv_t. The
++ vector is not usually defined in a standard <elf.h> file, but it
++ can't hurt. We rename it to avoid conflicts. The sizes of these
++ types are an arrangement between the exec server and the program
++ interpreter, so we don't fully specify them here. */
++
++typedef struct
++{
++ int a_type; /* Entry type */
++ union
++ {
++ long int a_val; /* Integer value */
++ void *a_ptr; /* Pointer value */
++ void (*a_fcn) (void); /* Function pointer value */
++ } a_un;
++} Elf32_auxv_t;
++
++typedef struct
++{
++ long int a_type; /* Entry type */
++ union
++ {
++ long int a_val; /* Integer value */
++ void *a_ptr; /* Pointer value */
++ void (*a_fcn) (void); /* Function pointer value */
++ } a_un;
++} Elf64_auxv_t;
++
++/* Legal values for a_type (entry type). */
++
++#define AT_NULL 0 /* End of vector */
++#define AT_IGNORE 1 /* Entry should be ignored */
++#define AT_EXECFD 2 /* File descriptor of program */
++#define AT_PHDR 3 /* Program headers for program */
++#define AT_PHENT 4 /* Size of program header entry */
++#define AT_PHNUM 5 /* Number of program headers */
++#define AT_PAGESZ 6 /* System page size */
++#define AT_BASE 7 /* Base address of interpreter */
++#define AT_FLAGS 8 /* Flags */
++#define AT_ENTRY 9 /* Entry point of program */
++#define AT_NOTELF 10 /* Program is not ELF */
++#define AT_UID 11 /* Real uid */
++#define AT_EUID 12 /* Effective uid */
++#define AT_GID 13 /* Real gid */
++#define AT_EGID 14 /* Effective gid */
++#define AT_CLKTCK 17 /* Frequency of times() */
++
++/* Some more special a_type values describing the hardware. */
++#define AT_PLATFORM 15 /* String identifying platform. */
++#define AT_HWCAP 16 /* Machine dependent hints about
++ processor capabilities. */
++
++/* This entry gives some information about the FPU initialization
++ performed by the kernel. */
++#define AT_FPUCW 18 /* Used FPU control word. */
++
++/* Cache block sizes. */
++#define AT_DCACHEBSIZE 19 /* Data cache block size. */
++#define AT_ICACHEBSIZE 20 /* Instruction cache block size. */
++#define AT_UCACHEBSIZE 21 /* Unified cache block size. */
++
++/* A special ignored value for PPC, used by the kernel to control the
++ interpretation of the AUXV. Must be > 16. */
++#define AT_IGNOREPPC 22 /* Entry should be ignored. */
++
++#define AT_SECURE 23 /* Boolean, was exec setuid-like? */
++
++/* Pointer to the global system page used for system calls and other
++ nice things. */
++#define AT_SYSINFO 32
++#define AT_SYSINFO_EHDR 33
++
++
++/* Note section contents. Each entry in the note section begins with
++ a header of a fixed form. */
++
++typedef struct
++{
++ Elf32_Word n_namesz; /* Length of the note's name. */
++ Elf32_Word n_descsz; /* Length of the note's descriptor. */
++ Elf32_Word n_type; /* Type of the note. */
++} Elf32_Nhdr;
++
++typedef struct
++{
++ Elf64_Word n_namesz; /* Length of the note's name. */
++ Elf64_Word n_descsz; /* Length of the note's descriptor. */
++ Elf64_Word n_type; /* Type of the note. */
++} Elf64_Nhdr;
++
++/* Known names of notes. */
++
++/* Solaris entries in the note section have this name. */
++#define ELF_NOTE_SOLARIS "SUNW Solaris"
++
++/* Note entries for GNU systems have this name. */
++#define ELF_NOTE_GNU "GNU"
++
++
++/* Defined types of notes for Solaris. */
++
++/* Value of descriptor (one word) is desired pagesize for the binary. */
++#define ELF_NOTE_PAGESIZE_HINT 1
++
++
++/* Defined note types for GNU systems. */
++
++/* ABI information. The descriptor consists of words:
++ word 0: OS descriptor
++ word 1: major version of the ABI
++ word 2: minor version of the ABI
++ word 3: subminor version of the ABI
++*/
++#define ELF_NOTE_ABI 1
++
++/* Known OSes. These value can appear in word 0 of an ELF_NOTE_ABI
++ note section entry. */
++#define ELF_NOTE_OS_LINUX 0
++#define ELF_NOTE_OS_GNU 1
++#define ELF_NOTE_OS_SOLARIS2 2
++#define ELF_NOTE_OS_FREEBSD 3
++
++
++/* Move records. */
++typedef struct
++{
++ Elf32_Xword m_value; /* Symbol value. */
++ Elf32_Word m_info; /* Size and index. */
++ Elf32_Word m_poffset; /* Symbol offset. */
++ Elf32_Half m_repeat; /* Repeat count. */
++ Elf32_Half m_stride; /* Stride info. */
++} Elf32_Move;
++
++typedef struct
++{
++ Elf64_Xword m_value; /* Symbol value. */
++ Elf64_Xword m_info; /* Size and index. */
++ Elf64_Xword m_poffset; /* Symbol offset. */
++ Elf64_Half m_repeat; /* Repeat count. */
++ Elf64_Half m_stride; /* Stride info. */
++} Elf64_Move;
++
++/* Macro to construct move records. */
++#define ELF32_M_SYM(info) ((info) >> 8)
++#define ELF32_M_SIZE(info) ((unsigned char) (info))
++#define ELF32_M_INFO(sym, size) (((sym) << 8) + (unsigned char) (size))
++
++#define ELF64_M_SYM(info) ELF32_M_SYM (info)
++#define ELF64_M_SIZE(info) ELF32_M_SIZE (info)
++#define ELF64_M_INFO(sym, size) ELF32_M_INFO (sym, size)
++
++
++/* Motorola 68k specific definitions. */
++
++/* Values for Elf32_Ehdr.e_flags. */
++#define EF_CPU32 0x00810000
++
++/* m68k relocs. */
++
++#define R_68K_NONE 0 /* No reloc */
++#define R_68K_32 1 /* Direct 32 bit */
++#define R_68K_16 2 /* Direct 16 bit */
++#define R_68K_8 3 /* Direct 8 bit */
++#define R_68K_PC32 4 /* PC relative 32 bit */
++#define R_68K_PC16 5 /* PC relative 16 bit */
++#define R_68K_PC8 6 /* PC relative 8 bit */
++#define R_68K_GOT32 7 /* 32 bit PC relative GOT entry */
++#define R_68K_GOT16 8 /* 16 bit PC relative GOT entry */
++#define R_68K_GOT8 9 /* 8 bit PC relative GOT entry */
++#define R_68K_GOT32O 10 /* 32 bit GOT offset */
++#define R_68K_GOT16O 11 /* 16 bit GOT offset */
++#define R_68K_GOT8O 12 /* 8 bit GOT offset */
++#define R_68K_PLT32 13 /* 32 bit PC relative PLT address */
++#define R_68K_PLT16 14 /* 16 bit PC relative PLT address */
++#define R_68K_PLT8 15 /* 8 bit PC relative PLT address */
++#define R_68K_PLT32O 16 /* 32 bit PLT offset */
++#define R_68K_PLT16O 17 /* 16 bit PLT offset */
++#define R_68K_PLT8O 18 /* 8 bit PLT offset */
++#define R_68K_COPY 19 /* Copy symbol at runtime */
++#define R_68K_GLOB_DAT 20 /* Create GOT entry */
++#define R_68K_JMP_SLOT 21 /* Create PLT entry */
++#define R_68K_RELATIVE 22 /* Adjust by program base */
++/* Keep this the last entry. */
++#define R_68K_NUM 23
++
++/* Intel 80386 specific definitions. */
++
++/* i386 relocs. */
++
++#define R_386_NONE 0 /* No reloc */
++#define R_386_32 1 /* Direct 32 bit */
++#define R_386_PC32 2 /* PC relative 32 bit */
++#define R_386_GOT32 3 /* 32 bit GOT entry */
++#define R_386_PLT32 4 /* 32 bit PLT address */
++#define R_386_COPY 5 /* Copy symbol at runtime */
++#define R_386_GLOB_DAT 6 /* Create GOT entry */
++#define R_386_JMP_SLOT 7 /* Create PLT entry */
++#define R_386_RELATIVE 8 /* Adjust by program base */
++#define R_386_GOTOFF 9 /* 32 bit offset to GOT */
++#define R_386_GOTPC 10 /* 32 bit PC relative offset to GOT */
++#define R_386_32PLT 11
++#define R_386_TLS_TPOFF 14 /* Offset in static TLS block */
++#define R_386_TLS_IE 15 /* Address of GOT entry for static TLS
++ block offset */
++#define R_386_TLS_GOTIE 16 /* GOT entry for static TLS block
++ offset */
++#define R_386_TLS_LE 17 /* Offset relative to static TLS
++ block */
++#define R_386_TLS_GD 18 /* Direct 32 bit for GNU version of
++ general dynamic thread local data */
++#define R_386_TLS_LDM 19 /* Direct 32 bit for GNU version of
++ local dynamic thread local data
++ in LE code */
++#define R_386_16 20
++#define R_386_PC16 21
++#define R_386_8 22
++#define R_386_PC8 23
++#define R_386_TLS_GD_32 24 /* Direct 32 bit for general dynamic
++ thread local data */
++#define R_386_TLS_GD_PUSH 25 /* Tag for pushl in GD TLS code */
++#define R_386_TLS_GD_CALL 26 /* Relocation for call to
++ __tls_get_addr() */
++#define R_386_TLS_GD_POP 27 /* Tag for popl in GD TLS code */
++#define R_386_TLS_LDM_32 28 /* Direct 32 bit for local dynamic
++ thread local data in LE code */
++#define R_386_TLS_LDM_PUSH 29 /* Tag for pushl in LDM TLS code */
++#define R_386_TLS_LDM_CALL 30 /* Relocation for call to
++ __tls_get_addr() in LDM code */
++#define R_386_TLS_LDM_POP 31 /* Tag for popl in LDM TLS code */
++#define R_386_TLS_LDO_32 32 /* Offset relative to TLS block */
++#define R_386_TLS_IE_32 33 /* GOT entry for negated static TLS
++ block offset */
++#define R_386_TLS_LE_32 34 /* Negated offset relative to static
++ TLS block */
++#define R_386_TLS_DTPMOD32 35 /* ID of module containing symbol */
++#define R_386_TLS_DTPOFF32 36 /* Offset in TLS block */
++#define R_386_TLS_TPOFF32 37 /* Negated offset in static TLS block */
++/* Keep this the last entry. */
++#define R_386_NUM 38
++
++/* SUN SPARC specific definitions. */
++
++/* Legal values for ST_TYPE subfield of st_info (symbol type). */
++
++#define STT_REGISTER 13 /* Global register reserved to app. */
++
++/* Values for Elf64_Ehdr.e_flags. */
++
++#define EF_SPARCV9_MM 3
++#define EF_SPARCV9_TSO 0
++#define EF_SPARCV9_PSO 1
++#define EF_SPARCV9_RMO 2
++#define EF_SPARC_LEDATA 0x800000 /* little endian data */
++#define EF_SPARC_EXT_MASK 0xFFFF00
++#define EF_SPARC_32PLUS 0x000100 /* generic V8+ features */
++#define EF_SPARC_SUN_US1 0x000200 /* Sun UltraSPARC1 extensions */
++#define EF_SPARC_HAL_R1 0x000400 /* HAL R1 extensions */
++#define EF_SPARC_SUN_US3 0x000800 /* Sun UltraSPARCIII extensions */
++
++/* SPARC relocs. */
++
++#define R_SPARC_NONE 0 /* No reloc */
++#define R_SPARC_8 1 /* Direct 8 bit */
++#define R_SPARC_16 2 /* Direct 16 bit */
++#define R_SPARC_32 3 /* Direct 32 bit */
++#define R_SPARC_DISP8 4 /* PC relative 8 bit */
++#define R_SPARC_DISP16 5 /* PC relative 16 bit */
++#define R_SPARC_DISP32 6 /* PC relative 32 bit */
++#define R_SPARC_WDISP30 7 /* PC relative 30 bit shifted */
++#define R_SPARC_WDISP22 8 /* PC relative 22 bit shifted */
++#define R_SPARC_HI22 9 /* High 22 bit */
++#define R_SPARC_22 10 /* Direct 22 bit */
++#define R_SPARC_13 11 /* Direct 13 bit */
++#define R_SPARC_LO10 12 /* Truncated 10 bit */
++#define R_SPARC_GOT10 13 /* Truncated 10 bit GOT entry */
++#define R_SPARC_GOT13 14 /* 13 bit GOT entry */
++#define R_SPARC_GOT22 15 /* 22 bit GOT entry shifted */
++#define R_SPARC_PC10 16 /* PC relative 10 bit truncated */
++#define R_SPARC_PC22 17 /* PC relative 22 bit shifted */
++#define R_SPARC_WPLT30 18 /* 30 bit PC relative PLT address */
++#define R_SPARC_COPY 19 /* Copy symbol at runtime */
++#define R_SPARC_GLOB_DAT 20 /* Create GOT entry */
++#define R_SPARC_JMP_SLOT 21 /* Create PLT entry */
++#define R_SPARC_RELATIVE 22 /* Adjust by program base */
++#define R_SPARC_UA32 23 /* Direct 32 bit unaligned */
++
++/* Additional Sparc64 relocs. */
++
++#define R_SPARC_PLT32 24 /* Direct 32 bit ref to PLT entry */
++#define R_SPARC_HIPLT22 25 /* High 22 bit PLT entry */
++#define R_SPARC_LOPLT10 26 /* Truncated 10 bit PLT entry */
++#define R_SPARC_PCPLT32 27 /* PC rel 32 bit ref to PLT entry */
++#define R_SPARC_PCPLT22 28 /* PC rel high 22 bit PLT entry */
++#define R_SPARC_PCPLT10 29 /* PC rel trunc 10 bit PLT entry */
++#define R_SPARC_10 30 /* Direct 10 bit */
++#define R_SPARC_11 31 /* Direct 11 bit */
++#define R_SPARC_64 32 /* Direct 64 bit */
++#define R_SPARC_OLO10 33 /* 10bit with secondary 13bit addend */
++#define R_SPARC_HH22 34 /* Top 22 bits of direct 64 bit */
++#define R_SPARC_HM10 35 /* High middle 10 bits of ... */
++#define R_SPARC_LM22 36 /* Low middle 22 bits of ... */
++#define R_SPARC_PC_HH22 37 /* Top 22 bits of pc rel 64 bit */
++#define R_SPARC_PC_HM10 38 /* High middle 10 bit of ... */
++#define R_SPARC_PC_LM22 39 /* Low miggle 22 bits of ... */
++#define R_SPARC_WDISP16 40 /* PC relative 16 bit shifted */
++#define R_SPARC_WDISP19 41 /* PC relative 19 bit shifted */
++#define R_SPARC_7 43 /* Direct 7 bit */
++#define R_SPARC_5 44 /* Direct 5 bit */
++#define R_SPARC_6 45 /* Direct 6 bit */
++#define R_SPARC_DISP64 46 /* PC relative 64 bit */
++#define R_SPARC_PLT64 47 /* Direct 64 bit ref to PLT entry */
++#define R_SPARC_HIX22 48 /* High 22 bit complemented */
++#define R_SPARC_LOX10 49 /* Truncated 11 bit complemented */
++#define R_SPARC_H44 50 /* Direct high 12 of 44 bit */
++#define R_SPARC_M44 51 /* Direct mid 22 of 44 bit */
++#define R_SPARC_L44 52 /* Direct low 10 of 44 bit */
++#define R_SPARC_REGISTER 53 /* Global register usage */
++#define R_SPARC_UA64 54 /* Direct 64 bit unaligned */
++#define R_SPARC_UA16 55 /* Direct 16 bit unaligned */
++#define R_SPARC_TLS_GD_HI22 56
++#define R_SPARC_TLS_GD_LO10 57
++#define R_SPARC_TLS_GD_ADD 58
++#define R_SPARC_TLS_GD_CALL 59
++#define R_SPARC_TLS_LDM_HI22 60
++#define R_SPARC_TLS_LDM_LO10 61
++#define R_SPARC_TLS_LDM_ADD 62
++#define R_SPARC_TLS_LDM_CALL 63
++#define R_SPARC_TLS_LDO_HIX22 64
++#define R_SPARC_TLS_LDO_LOX10 65
++#define R_SPARC_TLS_LDO_ADD 66
++#define R_SPARC_TLS_IE_HI22 67
++#define R_SPARC_TLS_IE_LO10 68
++#define R_SPARC_TLS_IE_LD 69
++#define R_SPARC_TLS_IE_LDX 70
++#define R_SPARC_TLS_IE_ADD 71
++#define R_SPARC_TLS_LE_HIX22 72
++#define R_SPARC_TLS_LE_LOX10 73
++#define R_SPARC_TLS_DTPMOD32 74
++#define R_SPARC_TLS_DTPMOD64 75
++#define R_SPARC_TLS_DTPOFF32 76
++#define R_SPARC_TLS_DTPOFF64 77
++#define R_SPARC_TLS_TPOFF32 78
++#define R_SPARC_TLS_TPOFF64 79
++/* Keep this the last entry. */
++#define R_SPARC_NUM 80
++
++/* For Sparc64, legal values for d_tag of Elf64_Dyn. */
++
++#define DT_SPARC_REGISTER 0x70000001
++#define DT_SPARC_NUM 2
++
++/* Bits present in AT_HWCAP, primarily for Sparc32. */
++
++#define HWCAP_SPARC_FLUSH 1 /* The cpu supports flush insn. */
++#define HWCAP_SPARC_STBAR 2
++#define HWCAP_SPARC_SWAP 4
++#define HWCAP_SPARC_MULDIV 8
++#define HWCAP_SPARC_V9 16 /* The cpu is v9, so v8plus is ok. */
++#define HWCAP_SPARC_ULTRA3 32
++
++/* MIPS R3000 specific definitions. */
++
++/* Legal values for e_flags field of Elf32_Ehdr. */
++
++#define EF_MIPS_NOREORDER 1 /* A .noreorder directive was used */
++#define EF_MIPS_PIC 2 /* Contains PIC code */
++#define EF_MIPS_CPIC 4 /* Uses PIC calling sequence */
++#define EF_MIPS_XGOT 8
++#define EF_MIPS_64BIT_WHIRL 16
++#define EF_MIPS_ABI2 32
++#define EF_MIPS_ABI_ON32 64
++#define EF_MIPS_ARCH 0xf0000000 /* MIPS architecture level */
++
++/* Legal values for MIPS architecture level. */
++
++#define EF_MIPS_ARCH_1 0x00000000 /* -mips1 code. */
++#define EF_MIPS_ARCH_2 0x10000000 /* -mips2 code. */
++#define EF_MIPS_ARCH_3 0x20000000 /* -mips3 code. */
++#define EF_MIPS_ARCH_4 0x30000000 /* -mips4 code. */
++#define EF_MIPS_ARCH_5 0x40000000 /* -mips5 code. */
++#define EF_MIPS_ARCH_32 0x60000000 /* MIPS32 code. */
++#define EF_MIPS_ARCH_64 0x70000000 /* MIPS64 code. */
++
++/* The following are non-official names and should not be used. */
++
++#define E_MIPS_ARCH_1 0x00000000 /* -mips1 code. */
++#define E_MIPS_ARCH_2 0x10000000 /* -mips2 code. */
++#define E_MIPS_ARCH_3 0x20000000 /* -mips3 code. */
++#define E_MIPS_ARCH_4 0x30000000 /* -mips4 code. */
++#define E_MIPS_ARCH_5 0x40000000 /* -mips5 code. */
++#define E_MIPS_ARCH_32 0x60000000 /* MIPS32 code. */
++#define E_MIPS_ARCH_64 0x70000000 /* MIPS64 code. */
++
++/* Special section indices. */
++
++#define SHN_MIPS_ACOMMON 0xff00 /* Allocated common symbols */
++#define SHN_MIPS_TEXT 0xff01 /* Allocated test symbols. */
++#define SHN_MIPS_DATA 0xff02 /* Allocated data symbols. */
++#define SHN_MIPS_SCOMMON 0xff03 /* Small common symbols */
++#define SHN_MIPS_SUNDEFINED 0xff04 /* Small undefined symbols */
++
++/* Legal values for sh_type field of Elf32_Shdr. */
++
++#define SHT_MIPS_LIBLIST 0x70000000 /* Shared objects used in link */
++#define SHT_MIPS_MSYM 0x70000001
++#define SHT_MIPS_CONFLICT 0x70000002 /* Conflicting symbols */
++#define SHT_MIPS_GPTAB 0x70000003 /* Global data area sizes */
++#define SHT_MIPS_UCODE 0x70000004 /* Reserved for SGI/MIPS compilers */
++#define SHT_MIPS_DEBUG 0x70000005 /* MIPS ECOFF debugging information*/
++#define SHT_MIPS_REGINFO 0x70000006 /* Register usage information */
++#define SHT_MIPS_PACKAGE 0x70000007
++#define SHT_MIPS_PACKSYM 0x70000008
++#define SHT_MIPS_RELD 0x70000009
++#define SHT_MIPS_IFACE 0x7000000b
++#define SHT_MIPS_CONTENT 0x7000000c
++#define SHT_MIPS_OPTIONS 0x7000000d /* Miscellaneous options. */
++#define SHT_MIPS_SHDR 0x70000010
++#define SHT_MIPS_FDESC 0x70000011
++#define SHT_MIPS_EXTSYM 0x70000012
++#define SHT_MIPS_DENSE 0x70000013
++#define SHT_MIPS_PDESC 0x70000014
++#define SHT_MIPS_LOCSYM 0x70000015
++#define SHT_MIPS_AUXSYM 0x70000016
++#define SHT_MIPS_OPTSYM 0x70000017
++#define SHT_MIPS_LOCSTR 0x70000018
++#define SHT_MIPS_LINE 0x70000019
++#define SHT_MIPS_RFDESC 0x7000001a
++#define SHT_MIPS_DELTASYM 0x7000001b
++#define SHT_MIPS_DELTAINST 0x7000001c
++#define SHT_MIPS_DELTACLASS 0x7000001d
++#define SHT_MIPS_DWARF 0x7000001e /* DWARF debugging information. */
++#define SHT_MIPS_DELTADECL 0x7000001f
++#define SHT_MIPS_SYMBOL_LIB 0x70000020
++#define SHT_MIPS_EVENTS 0x70000021 /* Event section. */
++#define SHT_MIPS_TRANSLATE 0x70000022
++#define SHT_MIPS_PIXIE 0x70000023
++#define SHT_MIPS_XLATE 0x70000024
++#define SHT_MIPS_XLATE_DEBUG 0x70000025
++#define SHT_MIPS_WHIRL 0x70000026
++#define SHT_MIPS_EH_REGION 0x70000027
++#define SHT_MIPS_XLATE_OLD 0x70000028
++#define SHT_MIPS_PDR_EXCEPTION 0x70000029
++
++/* Legal values for sh_flags field of Elf32_Shdr. */
++
++#define SHF_MIPS_GPREL 0x10000000 /* Must be part of global data area */
++#define SHF_MIPS_MERGE 0x20000000
++#define SHF_MIPS_ADDR 0x40000000
++#define SHF_MIPS_STRINGS 0x80000000
++#define SHF_MIPS_NOSTRIP 0x08000000
++#define SHF_MIPS_LOCAL 0x04000000
++#define SHF_MIPS_NAMES 0x02000000
++#define SHF_MIPS_NODUPE 0x01000000
++
++
++/* Symbol tables. */
++
++/* MIPS specific values for `st_other'. */
++#define STO_MIPS_DEFAULT 0x0
++#define STO_MIPS_INTERNAL 0x1
++#define STO_MIPS_HIDDEN 0x2
++#define STO_MIPS_PROTECTED 0x3
++#define STO_MIPS_SC_ALIGN_UNUSED 0xff
++
++/* MIPS specific values for `st_info'. */
++#define STB_MIPS_SPLIT_COMMON 13
++
++/* Entries found in sections of type SHT_MIPS_GPTAB. */
++
++typedef union
++{
++ struct
++ {
++ Elf32_Word gt_current_g_value; /* -G value used for compilation */
++ Elf32_Word gt_unused; /* Not used */
++ } gt_header; /* First entry in section */
++ struct
++ {
++ Elf32_Word gt_g_value; /* If this value were used for -G */
++ Elf32_Word gt_bytes; /* This many bytes would be used */
++ } gt_entry; /* Subsequent entries in section */
++} Elf32_gptab;
++
++/* Entry found in sections of type SHT_MIPS_REGINFO. */
++
++typedef struct
++{
++ Elf32_Word ri_gprmask; /* General registers used */
++ Elf32_Word ri_cprmask[4]; /* Coprocessor registers used */
++ Elf32_Sword ri_gp_value; /* $gp register value */
++} Elf32_RegInfo;
++
++/* Entries found in sections of type SHT_MIPS_OPTIONS. */
++
++typedef struct
++{
++ unsigned char kind; /* Determines interpretation of the
++ variable part of descriptor. */
++ unsigned char size; /* Size of descriptor, including header. */
++ Elf32_Section section; /* Section header index of section affected,
++ 0 for global options. */
++ Elf32_Word info; /* Kind-specific information. */
++} Elf_Options;
++
++/* Values for `kind' field in Elf_Options. */
++
++#define ODK_NULL 0 /* Undefined. */
++#define ODK_REGINFO 1 /* Register usage information. */
++#define ODK_EXCEPTIONS 2 /* Exception processing options. */
++#define ODK_PAD 3 /* Section padding options. */
++#define ODK_HWPATCH 4 /* Hardware workarounds performed */
++#define ODK_FILL 5 /* record the fill value used by the linker. */
++#define ODK_TAGS 6 /* reserve space for desktop tools to write. */
++#define ODK_HWAND 7 /* HW workarounds. 'AND' bits when merging. */
++#define ODK_HWOR 8 /* HW workarounds. 'OR' bits when merging. */
++
++/* Values for `info' in Elf_Options for ODK_EXCEPTIONS entries. */
++
++#define OEX_FPU_MIN 0x1f /* FPE's which MUST be enabled. */
++#define OEX_FPU_MAX 0x1f00 /* FPE's which MAY be enabled. */
++#define OEX_PAGE0 0x10000 /* page zero must be mapped. */
++#define OEX_SMM 0x20000 /* Force sequential memory mode? */
++#define OEX_FPDBUG 0x40000 /* Force floating point debug mode? */
++#define OEX_PRECISEFP OEX_FPDBUG
++#define OEX_DISMISS 0x80000 /* Dismiss invalid address faults? */
++
++#define OEX_FPU_INVAL 0x10
++#define OEX_FPU_DIV0 0x08
++#define OEX_FPU_OFLO 0x04
++#define OEX_FPU_UFLO 0x02
++#define OEX_FPU_INEX 0x01
++
++/* Masks for `info' in Elf_Options for an ODK_HWPATCH entry. */
++
++#define OHW_R4KEOP 0x1 /* R4000 end-of-page patch. */
++#define OHW_R8KPFETCH 0x2 /* may need R8000 prefetch patch. */
++#define OHW_R5KEOP 0x4 /* R5000 end-of-page patch. */
++#define OHW_R5KCVTL 0x8 /* R5000 cvt.[ds].l bug. clean=1. */
++
++#define OPAD_PREFIX 0x1
++#define OPAD_POSTFIX 0x2
++#define OPAD_SYMBOL 0x4
++
++/* Entry found in `.options' section. */
++
++typedef struct
++{
++ Elf32_Word hwp_flags1; /* Extra flags. */
++ Elf32_Word hwp_flags2; /* Extra flags. */
++} Elf_Options_Hw;
++
++/* Masks for `info' in ElfOptions for ODK_HWAND and ODK_HWOR entries. */
++
++#define OHWA0_R4KEOP_CHECKED 0x00000001
++#define OHWA1_R4KEOP_CLEAN 0x00000002
++
++/* MIPS relocs. */
++
++#define R_MIPS_NONE 0 /* No reloc */
++#define R_MIPS_16 1 /* Direct 16 bit */
++#define R_MIPS_32 2 /* Direct 32 bit */
++#define R_MIPS_REL32 3 /* PC relative 32 bit */
++#define R_MIPS_26 4 /* Direct 26 bit shifted */
++#define R_MIPS_HI16 5 /* High 16 bit */
++#define R_MIPS_LO16 6 /* Low 16 bit */
++#define R_MIPS_GPREL16 7 /* GP relative 16 bit */
++#define R_MIPS_LITERAL 8 /* 16 bit literal entry */
++#define R_MIPS_GOT16 9 /* 16 bit GOT entry */
++#define R_MIPS_PC16 10 /* PC relative 16 bit */
++#define R_MIPS_CALL16 11 /* 16 bit GOT entry for function */
++#define R_MIPS_GPREL32 12 /* GP relative 32 bit */
++
++#define R_MIPS_SHIFT5 16
++#define R_MIPS_SHIFT6 17
++#define R_MIPS_64 18
++#define R_MIPS_GOT_DISP 19
++#define R_MIPS_GOT_PAGE 20
++#define R_MIPS_GOT_OFST 21
++#define R_MIPS_GOT_HI16 22
++#define R_MIPS_GOT_LO16 23
++#define R_MIPS_SUB 24
++#define R_MIPS_INSERT_A 25
++#define R_MIPS_INSERT_B 26
++#define R_MIPS_DELETE 27
++#define R_MIPS_HIGHER 28
++#define R_MIPS_HIGHEST 29
++#define R_MIPS_CALL_HI16 30
++#define R_MIPS_CALL_LO16 31
++#define R_MIPS_SCN_DISP 32
++#define R_MIPS_REL16 33
++#define R_MIPS_ADD_IMMEDIATE 34
++#define R_MIPS_PJUMP 35
++#define R_MIPS_RELGOT 36
++#define R_MIPS_JALR 37
++/* Keep this the last entry. */
++#define R_MIPS_NUM 38
++
++/* Legal values for p_type field of Elf32_Phdr. */
++
++#define PT_MIPS_REGINFO 0x70000000 /* Register usage information */
++#define PT_MIPS_RTPROC 0x70000001 /* Runtime procedure table. */
++#define PT_MIPS_OPTIONS 0x70000002
++
++/* Special program header types. */
++
++#define PF_MIPS_LOCAL 0x10000000
++
++/* Legal values for d_tag field of Elf32_Dyn. */
++
++#define DT_MIPS_RLD_VERSION 0x70000001 /* Runtime linker interface version */
++#define DT_MIPS_TIME_STAMP 0x70000002 /* Timestamp */
++#define DT_MIPS_ICHECKSUM 0x70000003 /* Checksum */
++#define DT_MIPS_IVERSION 0x70000004 /* Version string (string tbl index) */
++#define DT_MIPS_FLAGS 0x70000005 /* Flags */
++#define DT_MIPS_BASE_ADDRESS 0x70000006 /* Base address */
++#define DT_MIPS_MSYM 0x70000007
++#define DT_MIPS_CONFLICT 0x70000008 /* Address of CONFLICT section */
++#define DT_MIPS_LIBLIST 0x70000009 /* Address of LIBLIST section */
++#define DT_MIPS_LOCAL_GOTNO 0x7000000a /* Number of local GOT entries */
++#define DT_MIPS_CONFLICTNO 0x7000000b /* Number of CONFLICT entries */
++#define DT_MIPS_LIBLISTNO 0x70000010 /* Number of LIBLIST entries */
++#define DT_MIPS_SYMTABNO 0x70000011 /* Number of DYNSYM entries */
++#define DT_MIPS_UNREFEXTNO 0x70000012 /* First external DYNSYM */
++#define DT_MIPS_GOTSYM 0x70000013 /* First GOT entry in DYNSYM */
++#define DT_MIPS_HIPAGENO 0x70000014 /* Number of GOT page table entries */
++#define DT_MIPS_RLD_MAP 0x70000016 /* Address of run time loader map. */
++#define DT_MIPS_DELTA_CLASS 0x70000017 /* Delta C++ class definition. */
++#define DT_MIPS_DELTA_CLASS_NO 0x70000018 /* Number of entries in
++ DT_MIPS_DELTA_CLASS. */
++#define DT_MIPS_DELTA_INSTANCE 0x70000019 /* Delta C++ class instances. */
++#define DT_MIPS_DELTA_INSTANCE_NO 0x7000001a /* Number of entries in
++ DT_MIPS_DELTA_INSTANCE. */
++#define DT_MIPS_DELTA_RELOC 0x7000001b /* Delta relocations. */
++#define DT_MIPS_DELTA_RELOC_NO 0x7000001c /* Number of entries in
++ DT_MIPS_DELTA_RELOC. */
++#define DT_MIPS_DELTA_SYM 0x7000001d /* Delta symbols that Delta
++ relocations refer to. */
++#define DT_MIPS_DELTA_SYM_NO 0x7000001e /* Number of entries in
++ DT_MIPS_DELTA_SYM. */
++#define DT_MIPS_DELTA_CLASSSYM 0x70000020 /* Delta symbols that hold the
++ class declaration. */
++#define DT_MIPS_DELTA_CLASSSYM_NO 0x70000021 /* Number of entries in
++ DT_MIPS_DELTA_CLASSSYM. */
++#define DT_MIPS_CXX_FLAGS 0x70000022 /* Flags indicating for C++ flavor. */
++#define DT_MIPS_PIXIE_INIT 0x70000023
++#define DT_MIPS_SYMBOL_LIB 0x70000024
++#define DT_MIPS_LOCALPAGE_GOTIDX 0x70000025
++#define DT_MIPS_LOCAL_GOTIDX 0x70000026
++#define DT_MIPS_HIDDEN_GOTIDX 0x70000027
++#define DT_MIPS_PROTECTED_GOTIDX 0x70000028
++#define DT_MIPS_OPTIONS 0x70000029 /* Address of .options. */
++#define DT_MIPS_INTERFACE 0x7000002a /* Address of .interface. */
++#define DT_MIPS_DYNSTR_ALIGN 0x7000002b
++#define DT_MIPS_INTERFACE_SIZE 0x7000002c /* Size of the .interface section. */
++#define DT_MIPS_RLD_TEXT_RESOLVE_ADDR 0x7000002d /* Address of rld_text_rsolve
++ function stored in GOT. */
++#define DT_MIPS_PERF_SUFFIX 0x7000002e /* Default suffix of dso to be added
++ by rld on dlopen() calls. */
++#define DT_MIPS_COMPACT_SIZE 0x7000002f /* (O32)Size of compact rel section. */
++#define DT_MIPS_GP_VALUE 0x70000030 /* GP value for aux GOTs. */
++#define DT_MIPS_AUX_DYNAMIC 0x70000031 /* Address of aux .dynamic. */
++#define DT_MIPS_NUM 0x32
++
++/* Legal values for DT_MIPS_FLAGS Elf32_Dyn entry. */
++
++#define RHF_NONE 0 /* No flags */
++#define RHF_QUICKSTART (1 << 0) /* Use quickstart */
++#define RHF_NOTPOT (1 << 1) /* Hash size not power of 2 */
++#define RHF_NO_LIBRARY_REPLACEMENT (1 << 2) /* Ignore LD_LIBRARY_PATH */
++#define RHF_NO_MOVE (1 << 3)
++#define RHF_SGI_ONLY (1 << 4)
++#define RHF_GUARANTEE_INIT (1 << 5)
++#define RHF_DELTA_C_PLUS_PLUS (1 << 6)
++#define RHF_GUARANTEE_START_INIT (1 << 7)
++#define RHF_PIXIE (1 << 8)
++#define RHF_DEFAULT_DELAY_LOAD (1 << 9)
++#define RHF_REQUICKSTART (1 << 10)
++#define RHF_REQUICKSTARTED (1 << 11)
++#define RHF_CORD (1 << 12)
++#define RHF_NO_UNRES_UNDEF (1 << 13)
++#define RHF_RLD_ORDER_SAFE (1 << 14)
++
++/* Entries found in sections of type SHT_MIPS_LIBLIST. */
++
++typedef struct
++{
++ Elf32_Word l_name; /* Name (string table index) */
++ Elf32_Word l_time_stamp; /* Timestamp */
++ Elf32_Word l_checksum; /* Checksum */
++ Elf32_Word l_version; /* Interface version */
++ Elf32_Word l_flags; /* Flags */
++} Elf32_Lib;
++
++typedef struct
++{
++ Elf64_Word l_name; /* Name (string table index) */
++ Elf64_Word l_time_stamp; /* Timestamp */
++ Elf64_Word l_checksum; /* Checksum */
++ Elf64_Word l_version; /* Interface version */
++ Elf64_Word l_flags; /* Flags */
++} Elf64_Lib;
++
++
++/* Legal values for l_flags. */
++
++#define LL_NONE 0
++#define LL_EXACT_MATCH (1 << 0) /* Require exact match */
++#define LL_IGNORE_INT_VER (1 << 1) /* Ignore interface version */
++#define LL_REQUIRE_MINOR (1 << 2)
++#define LL_EXPORTS (1 << 3)
++#define LL_DELAY_LOAD (1 << 4)
++#define LL_DELTA (1 << 5)
++
++/* Entries found in sections of type SHT_MIPS_CONFLICT. */
++
++typedef Elf32_Addr Elf32_Conflict;
++
++
++/* HPPA specific definitions. */
++
++/* Legal values for e_flags field of Elf32_Ehdr. */
++
++#define EF_PARISC_TRAPNIL 0x00010000 /* Trap nil pointer dereference. */
++#define EF_PARISC_EXT 0x00020000 /* Program uses arch. extensions. */
++#define EF_PARISC_LSB 0x00040000 /* Program expects little endian. */
++#define EF_PARISC_WIDE 0x00080000 /* Program expects wide mode. */
++#define EF_PARISC_NO_KABP 0x00100000 /* No kernel assisted branch
++ prediction. */
++#define EF_PARISC_LAZYSWAP 0x00400000 /* Allow lazy swapping. */
++#define EF_PARISC_ARCH 0x0000ffff /* Architecture version. */
++
++/* Defined values for `e_flags & EF_PARISC_ARCH' are: */
++
++#define EFA_PARISC_1_0 0x020b /* PA-RISC 1.0 big-endian. */
++#define EFA_PARISC_1_1 0x0210 /* PA-RISC 1.1 big-endian. */
++#define EFA_PARISC_2_0 0x0214 /* PA-RISC 2.0 big-endian. */
++
++/* Additional section indeces. */
++
++#define SHN_PARISC_ANSI_COMMON 0xff00 /* Section for tenatively declared
++ symbols in ANSI C. */
++#define SHN_PARISC_HUGE_COMMON 0xff01 /* Common blocks in huge model. */
++
++/* Legal values for sh_type field of Elf32_Shdr. */
++
++#define SHT_PARISC_EXT 0x70000000 /* Contains product specific ext. */
++#define SHT_PARISC_UNWIND 0x70000001 /* Unwind information. */
++#define SHT_PARISC_DOC 0x70000002 /* Debug info for optimized code. */
++
++/* Legal values for sh_flags field of Elf32_Shdr. */
++
++#define SHF_PARISC_SHORT 0x20000000 /* Section with short addressing. */
++#define SHF_PARISC_HUGE 0x40000000 /* Section far from gp. */
++#define SHF_PARISC_SBP 0x80000000 /* Static branch prediction code. */
++
++/* Legal values for ST_TYPE subfield of st_info (symbol type). */
++
++#define STT_PARISC_MILLICODE 13 /* Millicode function entry point. */
++
++#define STT_HP_OPAQUE (STT_LOOS + 0x1)
++#define STT_HP_STUB (STT_LOOS + 0x2)
++
++/* HPPA relocs. */
++
++#define R_PARISC_NONE 0 /* No reloc. */
++#define R_PARISC_DIR32 1 /* Direct 32-bit reference. */
++#define R_PARISC_DIR21L 2 /* Left 21 bits of eff. address. */
++#define R_PARISC_DIR17R 3 /* Right 17 bits of eff. address. */
++#define R_PARISC_DIR17F 4 /* 17 bits of eff. address. */
++#define R_PARISC_DIR14R 6 /* Right 14 bits of eff. address. */
++#define R_PARISC_PCREL32 9 /* 32-bit rel. address. */
++#define R_PARISC_PCREL21L 10 /* Left 21 bits of rel. address. */
++#define R_PARISC_PCREL17R 11 /* Right 17 bits of rel. address. */
++#define R_PARISC_PCREL17F 12 /* 17 bits of rel. address. */
++#define R_PARISC_PCREL14R 14 /* Right 14 bits of rel. address. */
++#define R_PARISC_DPREL21L 18 /* Left 21 bits of rel. address. */
++#define R_PARISC_DPREL14R 22 /* Right 14 bits of rel. address. */
++#define R_PARISC_GPREL21L 26 /* GP-relative, left 21 bits. */
++#define R_PARISC_GPREL14R 30 /* GP-relative, right 14 bits. */
++#define R_PARISC_LTOFF21L 34 /* LT-relative, left 21 bits. */
++#define R_PARISC_LTOFF14R 38 /* LT-relative, right 14 bits. */
++#define R_PARISC_SECREL32 41 /* 32 bits section rel. address. */
++#define R_PARISC_SEGBASE 48 /* No relocation, set segment base. */
++#define R_PARISC_SEGREL32 49 /* 32 bits segment rel. address. */
++#define R_PARISC_PLTOFF21L 50 /* PLT rel. address, left 21 bits. */
++#define R_PARISC_PLTOFF14R 54 /* PLT rel. address, right 14 bits. */
++#define R_PARISC_LTOFF_FPTR32 57 /* 32 bits LT-rel. function pointer. */
++#define R_PARISC_LTOFF_FPTR21L 58 /* LT-rel. fct ptr, left 21 bits. */
++#define R_PARISC_LTOFF_FPTR14R 62 /* LT-rel. fct ptr, right 14 bits. */
++#define R_PARISC_FPTR64 64 /* 64 bits function address. */
++#define R_PARISC_PLABEL32 65 /* 32 bits function address. */
++#define R_PARISC_PCREL64 72 /* 64 bits PC-rel. address. */
++#define R_PARISC_PCREL22F 74 /* 22 bits PC-rel. address. */
++#define R_PARISC_PCREL14WR 75 /* PC-rel. address, right 14 bits. */
++#define R_PARISC_PCREL14DR 76 /* PC rel. address, right 14 bits. */
++#define R_PARISC_PCREL16F 77 /* 16 bits PC-rel. address. */
++#define R_PARISC_PCREL16WF 78 /* 16 bits PC-rel. address. */
++#define R_PARISC_PCREL16DF 79 /* 16 bits PC-rel. address. */
++#define R_PARISC_DIR64 80 /* 64 bits of eff. address. */
++#define R_PARISC_DIR14WR 83 /* 14 bits of eff. address. */
++#define R_PARISC_DIR14DR 84 /* 14 bits of eff. address. */
++#define R_PARISC_DIR16F 85 /* 16 bits of eff. address. */
++#define R_PARISC_DIR16WF 86 /* 16 bits of eff. address. */
++#define R_PARISC_DIR16DF 87 /* 16 bits of eff. address. */
++#define R_PARISC_GPREL64 88 /* 64 bits of GP-rel. address. */
++#define R_PARISC_GPREL14WR 91 /* GP-rel. address, right 14 bits. */
++#define R_PARISC_GPREL14DR 92 /* GP-rel. address, right 14 bits. */
++#define R_PARISC_GPREL16F 93 /* 16 bits GP-rel. address. */
++#define R_PARISC_GPREL16WF 94 /* 16 bits GP-rel. address. */
++#define R_PARISC_GPREL16DF 95 /* 16 bits GP-rel. address. */
++#define R_PARISC_LTOFF64 96 /* 64 bits LT-rel. address. */
++#define R_PARISC_LTOFF14WR 99 /* LT-rel. address, right 14 bits. */
++#define R_PARISC_LTOFF14DR 100 /* LT-rel. address, right 14 bits. */
++#define R_PARISC_LTOFF16F 101 /* 16 bits LT-rel. address. */
++#define R_PARISC_LTOFF16WF 102 /* 16 bits LT-rel. address. */
++#define R_PARISC_LTOFF16DF 103 /* 16 bits LT-rel. address. */
++#define R_PARISC_SECREL64 104 /* 64 bits section rel. address. */
++#define R_PARISC_SEGREL64 112 /* 64 bits segment rel. address. */
++#define R_PARISC_PLTOFF14WR 115 /* PLT-rel. address, right 14 bits. */
++#define R_PARISC_PLTOFF14DR 116 /* PLT-rel. address, right 14 bits. */
++#define R_PARISC_PLTOFF16F 117 /* 16 bits LT-rel. address. */
++#define R_PARISC_PLTOFF16WF 118 /* 16 bits PLT-rel. address. */
++#define R_PARISC_PLTOFF16DF 119 /* 16 bits PLT-rel. address. */
++#define R_PARISC_LTOFF_FPTR64 120 /* 64 bits LT-rel. function ptr. */
++#define R_PARISC_LTOFF_FPTR14WR 123 /* LT-rel. fct. ptr., right 14 bits. */
++#define R_PARISC_LTOFF_FPTR14DR 124 /* LT-rel. fct. ptr., right 14 bits. */
++#define R_PARISC_LTOFF_FPTR16F 125 /* 16 bits LT-rel. function ptr. */
++#define R_PARISC_LTOFF_FPTR16WF 126 /* 16 bits LT-rel. function ptr. */
++#define R_PARISC_LTOFF_FPTR16DF 127 /* 16 bits LT-rel. function ptr. */
++#define R_PARISC_LORESERVE 128
++#define R_PARISC_COPY 128 /* Copy relocation. */
++#define R_PARISC_IPLT 129 /* Dynamic reloc, imported PLT */
++#define R_PARISC_EPLT 130 /* Dynamic reloc, exported PLT */
++#define R_PARISC_TPREL32 153 /* 32 bits TP-rel. address. */
++#define R_PARISC_TPREL21L 154 /* TP-rel. address, left 21 bits. */
++#define R_PARISC_TPREL14R 158 /* TP-rel. address, right 14 bits. */
++#define R_PARISC_LTOFF_TP21L 162 /* LT-TP-rel. address, left 21 bits. */
++#define R_PARISC_LTOFF_TP14R 166 /* LT-TP-rel. address, right 14 bits.*/
++#define R_PARISC_LTOFF_TP14F 167 /* 14 bits LT-TP-rel. address. */
++#define R_PARISC_TPREL64 216 /* 64 bits TP-rel. address. */
++#define R_PARISC_TPREL14WR 219 /* TP-rel. address, right 14 bits. */
++#define R_PARISC_TPREL14DR 220 /* TP-rel. address, right 14 bits. */
++#define R_PARISC_TPREL16F 221 /* 16 bits TP-rel. address. */
++#define R_PARISC_TPREL16WF 222 /* 16 bits TP-rel. address. */
++#define R_PARISC_TPREL16DF 223 /* 16 bits TP-rel. address. */
++#define R_PARISC_LTOFF_TP64 224 /* 64 bits LT-TP-rel. address. */
++#define R_PARISC_LTOFF_TP14WR 227 /* LT-TP-rel. address, right 14 bits.*/
++#define R_PARISC_LTOFF_TP14DR 228 /* LT-TP-rel. address, right 14 bits.*/
++#define R_PARISC_LTOFF_TP16F 229 /* 16 bits LT-TP-rel. address. */
++#define R_PARISC_LTOFF_TP16WF 230 /* 16 bits LT-TP-rel. address. */
++#define R_PARISC_LTOFF_TP16DF 231 /* 16 bits LT-TP-rel. address. */
++#define R_PARISC_HIRESERVE 255
++
++/* Legal values for p_type field of Elf32_Phdr/Elf64_Phdr. */
++
++#define PT_HP_TLS (PT_LOOS + 0x0)
++#define PT_HP_CORE_NONE (PT_LOOS + 0x1)
++#define PT_HP_CORE_VERSION (PT_LOOS + 0x2)
++#define PT_HP_CORE_KERNEL (PT_LOOS + 0x3)
++#define PT_HP_CORE_COMM (PT_LOOS + 0x4)
++#define PT_HP_CORE_PROC (PT_LOOS + 0x5)
++#define PT_HP_CORE_LOADABLE (PT_LOOS + 0x6)
++#define PT_HP_CORE_STACK (PT_LOOS + 0x7)
++#define PT_HP_CORE_SHM (PT_LOOS + 0x8)
++#define PT_HP_CORE_MMF (PT_LOOS + 0x9)
++#define PT_HP_PARALLEL (PT_LOOS + 0x10)
++#define PT_HP_FASTBIND (PT_LOOS + 0x11)
++#define PT_HP_OPT_ANNOT (PT_LOOS + 0x12)
++#define PT_HP_HSL_ANNOT (PT_LOOS + 0x13)
++#define PT_HP_STACK (PT_LOOS + 0x14)
++
++#define PT_PARISC_ARCHEXT 0x70000000
++#define PT_PARISC_UNWIND 0x70000001
++
++/* Legal values for p_flags field of Elf32_Phdr/Elf64_Phdr. */
++
++#define PF_PARISC_SBP 0x08000000
++
++#define PF_HP_PAGE_SIZE 0x00100000
++#define PF_HP_FAR_SHARED 0x00200000
++#define PF_HP_NEAR_SHARED 0x00400000
++#define PF_HP_CODE 0x01000000
++#define PF_HP_MODIFY 0x02000000
++#define PF_HP_LAZYSWAP 0x04000000
++#define PF_HP_SBP 0x08000000
++
++
++/* Alpha specific definitions. */
++
++/* Legal values for e_flags field of Elf64_Ehdr. */
++
++#define EF_ALPHA_32BIT 1 /* All addresses must be < 2GB. */
++#define EF_ALPHA_CANRELAX 2 /* Relocations for relaxing exist. */
++
++/* Legal values for sh_type field of Elf64_Shdr. */
++
++/* These two are primerily concerned with ECOFF debugging info. */
++#define SHT_ALPHA_DEBUG 0x70000001
++#define SHT_ALPHA_REGINFO 0x70000002
++
++/* Legal values for sh_flags field of Elf64_Shdr. */
++
++#define SHF_ALPHA_GPREL 0x10000000
++
++/* Legal values for st_other field of Elf64_Sym. */
++#define STO_ALPHA_NOPV 0x80 /* No PV required. */
++#define STO_ALPHA_STD_GPLOAD 0x88 /* PV only used for initial ldgp. */
++
++/* Alpha relocs. */
++
++#define R_ALPHA_NONE 0 /* No reloc */
++#define R_ALPHA_REFLONG 1 /* Direct 32 bit */
++#define R_ALPHA_REFQUAD 2 /* Direct 64 bit */
++#define R_ALPHA_GPREL32 3 /* GP relative 32 bit */
++#define R_ALPHA_LITERAL 4 /* GP relative 16 bit w/optimization */
++#define R_ALPHA_LITUSE 5 /* Optimization hint for LITERAL */
++#define R_ALPHA_GPDISP 6 /* Add displacement to GP */
++#define R_ALPHA_BRADDR 7 /* PC+4 relative 23 bit shifted */
++#define R_ALPHA_HINT 8 /* PC+4 relative 16 bit shifted */
++#define R_ALPHA_SREL16 9 /* PC relative 16 bit */
++#define R_ALPHA_SREL32 10 /* PC relative 32 bit */
++#define R_ALPHA_SREL64 11 /* PC relative 64 bit */
++#define R_ALPHA_GPRELHIGH 17 /* GP relative 32 bit, high 16 bits */
++#define R_ALPHA_GPRELLOW 18 /* GP relative 32 bit, low 16 bits */
++#define R_ALPHA_GPREL16 19 /* GP relative 16 bit */
++#define R_ALPHA_COPY 24 /* Copy symbol at runtime */
++#define R_ALPHA_GLOB_DAT 25 /* Create GOT entry */
++#define R_ALPHA_JMP_SLOT 26 /* Create PLT entry */
++#define R_ALPHA_RELATIVE 27 /* Adjust by program base */
++#define R_ALPHA_TLS_GD_HI 28
++#define R_ALPHA_TLSGD 29
++#define R_ALPHA_TLS_LDM 30
++#define R_ALPHA_DTPMOD64 31
++#define R_ALPHA_GOTDTPREL 32
++#define R_ALPHA_DTPREL64 33
++#define R_ALPHA_DTPRELHI 34
++#define R_ALPHA_DTPRELLO 35
++#define R_ALPHA_DTPREL16 36
++#define R_ALPHA_GOTTPREL 37
++#define R_ALPHA_TPREL64 38
++#define R_ALPHA_TPRELHI 39
++#define R_ALPHA_TPRELLO 40
++#define R_ALPHA_TPREL16 41
++/* Keep this the last entry. */
++#define R_ALPHA_NUM 46
++
++/* Magic values of the LITUSE relocation addend. */
++#define LITUSE_ALPHA_ADDR 0
++#define LITUSE_ALPHA_BASE 1
++#define LITUSE_ALPHA_BYTOFF 2
++#define LITUSE_ALPHA_JSR 3
++#define LITUSE_ALPHA_TLS_GD 4
++#define LITUSE_ALPHA_TLS_LDM 5
++
++
++/* PowerPC specific declarations */
++
++/* Values for Elf32/64_Ehdr.e_flags. */
++#define EF_PPC_EMB 0x80000000 /* PowerPC embedded flag */
++
++/* Cygnus local bits below */
++#define EF_PPC_RELOCATABLE 0x00010000 /* PowerPC -mrelocatable flag*/
++#define EF_PPC_RELOCATABLE_LIB 0x00008000 /* PowerPC -mrelocatable-lib
++ flag */
++
++/* PowerPC relocations defined by the ABIs */
++#define R_PPC_NONE 0
++#define R_PPC_ADDR32 1 /* 32bit absolute address */
++#define R_PPC_ADDR24 2 /* 26bit address, 2 bits ignored. */
++#define R_PPC_ADDR16 3 /* 16bit absolute address */
++#define R_PPC_ADDR16_LO 4 /* lower 16bit of absolute address */
++#define R_PPC_ADDR16_HI 5 /* high 16bit of absolute address */
++#define R_PPC_ADDR16_HA 6 /* adjusted high 16bit */
++#define R_PPC_ADDR14 7 /* 16bit address, 2 bits ignored */
++#define R_PPC_ADDR14_BRTAKEN 8
++#define R_PPC_ADDR14_BRNTAKEN 9
++#define R_PPC_REL24 10 /* PC relative 26 bit */
++#define R_PPC_REL14 11 /* PC relative 16 bit */
++#define R_PPC_REL14_BRTAKEN 12
++#define R_PPC_REL14_BRNTAKEN 13
++#define R_PPC_GOT16 14
++#define R_PPC_GOT16_LO 15
++#define R_PPC_GOT16_HI 16
++#define R_PPC_GOT16_HA 17
++#define R_PPC_PLTREL24 18
++#define R_PPC_COPY 19
++#define R_PPC_GLOB_DAT 20
++#define R_PPC_JMP_SLOT 21
++#define R_PPC_RELATIVE 22
++#define R_PPC_LOCAL24PC 23
++#define R_PPC_UADDR32 24
++#define R_PPC_UADDR16 25
++#define R_PPC_REL32 26
++#define R_PPC_PLT32 27
++#define R_PPC_PLTREL32 28
++#define R_PPC_PLT16_LO 29
++#define R_PPC_PLT16_HI 30
++#define R_PPC_PLT16_HA 31
++#define R_PPC_SDAREL16 32
++#define R_PPC_SECTOFF 33
++#define R_PPC_SECTOFF_LO 34
++#define R_PPC_SECTOFF_HI 35
++#define R_PPC_SECTOFF_HA 36
++
++/* PowerPC relocations defined for the TLS access ABI. */
++#define R_PPC_TLS 67 /* none (sym+add)@tls */
++#define R_PPC_DTPMOD32 68 /* word32 (sym+add)@dtpmod */
++#define R_PPC_TPREL16 69 /* half16* (sym+add)@tprel */
++#define R_PPC_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */
++#define R_PPC_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */
++#define R_PPC_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */
++#define R_PPC_TPREL32 73 /* word32 (sym+add)@tprel */
++#define R_PPC_DTPREL16 74 /* half16* (sym+add)@dtprel */
++#define R_PPC_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */
++#define R_PPC_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */
++#define R_PPC_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */
++#define R_PPC_DTPREL32 78 /* word32 (sym+add)@dtprel */
++#define R_PPC_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */
++#define R_PPC_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */
++#define R_PPC_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */
++#define R_PPC_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */
++#define R_PPC_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */
++#define R_PPC_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */
++#define R_PPC_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */
++#define R_PPC_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */
++#define R_PPC_GOT_TPREL16 87 /* half16* (sym+add)@got@tprel */
++#define R_PPC_GOT_TPREL16_LO 88 /* half16 (sym+add)@got@tprel@l */
++#define R_PPC_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */
++#define R_PPC_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */
++#define R_PPC_GOT_DTPREL16 91 /* half16* (sym+add)@got@dtprel */
++#define R_PPC_GOT_DTPREL16_LO 92 /* half16* (sym+add)@got@dtprel@l */
++#define R_PPC_GOT_DTPREL16_HI 93 /* half16* (sym+add)@got@dtprel@h */
++#define R_PPC_GOT_DTPREL16_HA 94 /* half16* (sym+add)@got@dtprel@ha */
++
++/* Keep this the last entry. */
++#define R_PPC_NUM 95
++
++/* The remaining relocs are from the Embedded ELF ABI, and are not
++ in the SVR4 ELF ABI. */
++#define R_PPC_EMB_NADDR32 101
++#define R_PPC_EMB_NADDR16 102
++#define R_PPC_EMB_NADDR16_LO 103
++#define R_PPC_EMB_NADDR16_HI 104
++#define R_PPC_EMB_NADDR16_HA 105
++#define R_PPC_EMB_SDAI16 106
++#define R_PPC_EMB_SDA2I16 107
++#define R_PPC_EMB_SDA2REL 108
++#define R_PPC_EMB_SDA21 109 /* 16 bit offset in SDA */
++#define R_PPC_EMB_MRKREF 110
++#define R_PPC_EMB_RELSEC16 111
++#define R_PPC_EMB_RELST_LO 112
++#define R_PPC_EMB_RELST_HI 113
++#define R_PPC_EMB_RELST_HA 114
++#define R_PPC_EMB_BIT_FLD 115
++#define R_PPC_EMB_RELSDA 116 /* 16 bit relative offset in SDA */
++
++/* Diab tool relocations. */
++#define R_PPC_DIAB_SDA21_LO 180 /* like EMB_SDA21, but lower 16 bit */
++#define R_PPC_DIAB_SDA21_HI 181 /* like EMB_SDA21, but high 16 bit */
++#define R_PPC_DIAB_SDA21_HA 182 /* like EMB_SDA21, adjusted high 16 */
++#define R_PPC_DIAB_RELSDA_LO 183 /* like EMB_RELSDA, but lower 16 bit */
++#define R_PPC_DIAB_RELSDA_HI 184 /* like EMB_RELSDA, but high 16 bit */
++#define R_PPC_DIAB_RELSDA_HA 185 /* like EMB_RELSDA, adjusted high 16 */
++
++/* This is a phony reloc to handle any old fashioned TOC16 references
++ that may still be in object files. */
++#define R_PPC_TOC16 255
++
++
++/* PowerPC64 relocations defined by the ABIs */
++#define R_PPC64_NONE R_PPC_NONE
++#define R_PPC64_ADDR32 R_PPC_ADDR32 /* 32bit absolute address */
++#define R_PPC64_ADDR24 R_PPC_ADDR24 /* 26bit address, word aligned */
++#define R_PPC64_ADDR16 R_PPC_ADDR16 /* 16bit absolute address */
++#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of address */
++#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of address. */
++#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits. */
++#define R_PPC64_ADDR14 R_PPC_ADDR14 /* 16bit address, word aligned */
++#define R_PPC64_ADDR14_BRTAKEN R_PPC_ADDR14_BRTAKEN
++#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN
++#define R_PPC64_REL24 R_PPC_REL24 /* PC-rel. 26 bit, word aligned */
++#define R_PPC64_REL14 R_PPC_REL14 /* PC relative 16 bit */
++#define R_PPC64_REL14_BRTAKEN R_PPC_REL14_BRTAKEN
++#define R_PPC64_REL14_BRNTAKEN R_PPC_REL14_BRNTAKEN
++#define R_PPC64_GOT16 R_PPC_GOT16
++#define R_PPC64_GOT16_LO R_PPC_GOT16_LO
++#define R_PPC64_GOT16_HI R_PPC_GOT16_HI
++#define R_PPC64_GOT16_HA R_PPC_GOT16_HA
++
++#define R_PPC64_COPY R_PPC_COPY
++#define R_PPC64_GLOB_DAT R_PPC_GLOB_DAT
++#define R_PPC64_JMP_SLOT R_PPC_JMP_SLOT
++#define R_PPC64_RELATIVE R_PPC_RELATIVE
++
++#define R_PPC64_UADDR32 R_PPC_UADDR32
++#define R_PPC64_UADDR16 R_PPC_UADDR16
++#define R_PPC64_REL32 R_PPC_REL32
++#define R_PPC64_PLT32 R_PPC_PLT32
++#define R_PPC64_PLTREL32 R_PPC_PLTREL32
++#define R_PPC64_PLT16_LO R_PPC_PLT16_LO
++#define R_PPC64_PLT16_HI R_PPC_PLT16_HI
++#define R_PPC64_PLT16_HA R_PPC_PLT16_HA
++
++#define R_PPC64_SECTOFF R_PPC_SECTOFF
++#define R_PPC64_SECTOFF_LO R_PPC_SECTOFF_LO
++#define R_PPC64_SECTOFF_HI R_PPC_SECTOFF_HI
++#define R_PPC64_SECTOFF_HA R_PPC_SECTOFF_HA
++#define R_PPC64_ADDR30 37 /* word30 (S + A - P) >> 2 */
++#define R_PPC64_ADDR64 38 /* doubleword64 S + A */
++#define R_PPC64_ADDR16_HIGHER 39 /* half16 #higher(S + A) */
++#define R_PPC64_ADDR16_HIGHERA 40 /* half16 #highera(S + A) */
++#define R_PPC64_ADDR16_HIGHEST 41 /* half16 #highest(S + A) */
++#define R_PPC64_ADDR16_HIGHESTA 42 /* half16 #highesta(S + A) */
++#define R_PPC64_UADDR64 43 /* doubleword64 S + A */
++#define R_PPC64_REL64 44 /* doubleword64 S + A - P */
++#define R_PPC64_PLT64 45 /* doubleword64 L + A */
++#define R_PPC64_PLTREL64 46 /* doubleword64 L + A - P */
++#define R_PPC64_TOC16 47 /* half16* S + A - .TOC */
++#define R_PPC64_TOC16_LO 48 /* half16 #lo(S + A - .TOC.) */
++#define R_PPC64_TOC16_HI 49 /* half16 #hi(S + A - .TOC.) */
++#define R_PPC64_TOC16_HA 50 /* half16 #ha(S + A - .TOC.) */
++#define R_PPC64_TOC 51 /* doubleword64 .TOC */
++#define R_PPC64_PLTGOT16 52 /* half16* M + A */
++#define R_PPC64_PLTGOT16_LO 53 /* half16 #lo(M + A) */
++#define R_PPC64_PLTGOT16_HI 54 /* half16 #hi(M + A) */
++#define R_PPC64_PLTGOT16_HA 55 /* half16 #ha(M + A) */
++
++#define R_PPC64_ADDR16_DS 56 /* half16ds* (S + A) >> 2 */
++#define R_PPC64_ADDR16_LO_DS 57 /* half16ds #lo(S + A) >> 2 */
++#define R_PPC64_GOT16_DS 58 /* half16ds* (G + A) >> 2 */
++#define R_PPC64_GOT16_LO_DS 59 /* half16ds #lo(G + A) >> 2 */
++#define R_PPC64_PLT16_LO_DS 60 /* half16ds #lo(L + A) >> 2 */
++#define R_PPC64_SECTOFF_DS 61 /* half16ds* (R + A) >> 2 */
++#define R_PPC64_SECTOFF_LO_DS 62 /* half16ds #lo(R + A) >> 2 */
++#define R_PPC64_TOC16_DS 63 /* half16ds* (S + A - .TOC.) >> 2 */
++#define R_PPC64_TOC16_LO_DS 64 /* half16ds #lo(S + A - .TOC.) >> 2 */
++#define R_PPC64_PLTGOT16_DS 65 /* half16ds* (M + A) >> 2 */
++#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds #lo(M + A) >> 2 */
++
++/* PowerPC64 relocations defined for the TLS access ABI. */
++#define R_PPC64_TLS 67 /* none (sym+add)@tls */
++#define R_PPC64_DTPMOD64 68 /* doubleword64 (sym+add)@dtpmod */
++#define R_PPC64_TPREL16 69 /* half16* (sym+add)@tprel */
++#define R_PPC64_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */
++#define R_PPC64_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */
++#define R_PPC64_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */
++#define R_PPC64_TPREL64 73 /* doubleword64 (sym+add)@tprel */
++#define R_PPC64_DTPREL16 74 /* half16* (sym+add)@dtprel */
++#define R_PPC64_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */
++#define R_PPC64_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */
++#define R_PPC64_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */
++#define R_PPC64_DTPREL64 78 /* doubleword64 (sym+add)@dtprel */
++#define R_PPC64_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */
++#define R_PPC64_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */
++#define R_PPC64_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */
++#define R_PPC64_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */
++#define R_PPC64_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */
++#define R_PPC64_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */
++#define R_PPC64_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */
++#define R_PPC64_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */
++#define R_PPC64_GOT_TPREL16_DS 87 /* half16ds* (sym+add)@got@tprel */
++#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
++#define R_PPC64_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */
++#define R_PPC64_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */
++#define R_PPC64_GOT_DTPREL16_DS 91 /* half16ds* (sym+add)@got@dtprel */
++#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
++#define R_PPC64_GOT_DTPREL16_HI 93 /* half16 (sym+add)@got@dtprel@h */
++#define R_PPC64_GOT_DTPREL16_HA 94 /* half16 (sym+add)@got@dtprel@ha */
++#define R_PPC64_TPREL16_DS 95 /* half16ds* (sym+add)@tprel */
++#define R_PPC64_TPREL16_LO_DS 96 /* half16ds (sym+add)@tprel@l */
++#define R_PPC64_TPREL16_HIGHER 97 /* half16 (sym+add)@tprel@higher */
++#define R_PPC64_TPREL16_HIGHERA 98 /* half16 (sym+add)@tprel@highera */
++#define R_PPC64_TPREL16_HIGHEST 99 /* half16 (sym+add)@tprel@highest */
++#define R_PPC64_TPREL16_HIGHESTA 100 /* half16 (sym+add)@tprel@highesta */
++#define R_PPC64_DTPREL16_DS 101 /* half16ds* (sym+add)@dtprel */
++#define R_PPC64_DTPREL16_LO_DS 102 /* half16ds (sym+add)@dtprel@l */
++#define R_PPC64_DTPREL16_HIGHER 103 /* half16 (sym+add)@dtprel@higher */
++#define R_PPC64_DTPREL16_HIGHERA 104 /* half16 (sym+add)@dtprel@highera */
++#define R_PPC64_DTPREL16_HIGHEST 105 /* half16 (sym+add)@dtprel@highest */
++#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16 (sym+add)@dtprel@highesta */
++
++/* Keep this the last entry. */
++#define R_PPC64_NUM 107
++
++/* PowerPC64 specific values for the Dyn d_tag field. */
++#define DT_PPC64_GLINK (DT_LOPROC + 0)
++#define DT_PPC64_NUM 1
++
++
++/* ARM specific declarations */
++
++/* Processor specific flags for the ELF header e_flags field. */
++#define EF_ARM_RELEXEC 0x01
++#define EF_ARM_HASENTRY 0x02
++#define EF_ARM_INTERWORK 0x04
++#define EF_ARM_APCS_26 0x08
++#define EF_ARM_APCS_FLOAT 0x10
++#define EF_ARM_PIC 0x20
++#define EF_ARM_ALIGN8 0x40 /* 8-bit structure alignment is in use */
++#define EF_ARM_NEW_ABI 0x80
++#define EF_ARM_OLD_ABI 0x100
++
++/* Other constants defined in the ARM ELF spec. version B-01. */
++/* NB. These conflict with values defined above. */
++#define EF_ARM_SYMSARESORTED 0x04
++#define EF_ARM_DYNSYMSUSESEGIDX 0x08
++#define EF_ARM_MAPSYMSFIRST 0x10
++#define EF_ARM_EABIMASK 0XFF000000
++
++#define EF_ARM_EABI_VERSION(flags) ((flags) & EF_ARM_EABIMASK)
++#define EF_ARM_EABI_UNKNOWN 0x00000000
++#define EF_ARM_EABI_VER1 0x01000000
++#define EF_ARM_EABI_VER2 0x02000000
++
++/* Additional symbol types for Thumb */
++#define STT_ARM_TFUNC 0xd
++
++/* ARM-specific values for sh_flags */
++#define SHF_ARM_ENTRYSECT 0x10000000 /* Section contains an entry point */
++#define SHF_ARM_COMDEF 0x80000000 /* Section may be multiply defined
++ in the input to a link step */
++
++/* ARM-specific program header flags */
++#define PF_ARM_SB 0x10000000 /* Segment contains the location
++ addressed by the static base */
++
++/* ARM relocs. */
++#define R_ARM_NONE 0 /* No reloc */
++#define R_ARM_PC24 1 /* PC relative 26 bit branch */
++#define R_ARM_ABS32 2 /* Direct 32 bit */
++#define R_ARM_REL32 3 /* PC relative 32 bit */
++#define R_ARM_PC13 4
++#define R_ARM_ABS16 5 /* Direct 16 bit */
++#define R_ARM_ABS12 6 /* Direct 12 bit */
++#define R_ARM_THM_ABS5 7
++#define R_ARM_ABS8 8 /* Direct 8 bit */
++#define R_ARM_SBREL32 9
++#define R_ARM_THM_PC22 10
++#define R_ARM_THM_PC8 11
++#define R_ARM_AMP_VCALL9 12
++#define R_ARM_SWI24 13
++#define R_ARM_THM_SWI8 14
++#define R_ARM_XPC25 15
++#define R_ARM_THM_XPC22 16
++#define R_ARM_COPY 20 /* Copy symbol at runtime */
++#define R_ARM_GLOB_DAT 21 /* Create GOT entry */
++#define R_ARM_JUMP_SLOT 22 /* Create PLT entry */
++#define R_ARM_RELATIVE 23 /* Adjust by program base */
++#define R_ARM_GOTOFF 24 /* 32 bit offset to GOT */
++#define R_ARM_GOTPC 25 /* 32 bit PC relative offset to GOT */
++#define R_ARM_GOT32 26 /* 32 bit GOT entry */
++#define R_ARM_PLT32 27 /* 32 bit PLT address */
++#define R_ARM_ALU_PCREL_7_0 32
++#define R_ARM_ALU_PCREL_15_8 33
++#define R_ARM_ALU_PCREL_23_15 34
++#define R_ARM_LDR_SBREL_11_0 35
++#define R_ARM_ALU_SBREL_19_12 36
++#define R_ARM_ALU_SBREL_27_20 37
++#define R_ARM_GNU_VTENTRY 100
++#define R_ARM_GNU_VTINHERIT 101
++#define R_ARM_THM_PC11 102 /* thumb unconditional branch */
++#define R_ARM_THM_PC9 103 /* thumb conditional branch */
++#define R_ARM_RXPC25 249
++#define R_ARM_RSBREL32 250
++#define R_ARM_THM_RPC22 251
++#define R_ARM_RREL32 252
++#define R_ARM_RABS22 253
++#define R_ARM_RPC24 254
++#define R_ARM_RBASE 255
++/* Keep this the last entry. */
++#define R_ARM_NUM 256
++
++/* IA-64 specific declarations. */
++
++/* Processor specific flags for the Ehdr e_flags field. */
++#define EF_IA_64_MASKOS 0x0000000f /* os-specific flags */
++#define EF_IA_64_ABI64 0x00000010 /* 64-bit ABI */
++#define EF_IA_64_ARCH 0xff000000 /* arch. version mask */
++
++/* Processor specific values for the Phdr p_type field. */
++#define PT_IA_64_ARCHEXT (PT_LOPROC + 0) /* arch extension bits */
++#define PT_IA_64_UNWIND (PT_LOPROC + 1) /* ia64 unwind bits */
++
++/* Processor specific flags for the Phdr p_flags field. */
++#define PF_IA_64_NORECOV 0x80000000 /* spec insns w/o recovery */
++
++/* Processor specific values for the Shdr sh_type field. */
++#define SHT_IA_64_EXT (SHT_LOPROC + 0) /* extension bits */
++#define SHT_IA_64_UNWIND (SHT_LOPROC + 1) /* unwind bits */
++
++/* Processor specific flags for the Shdr sh_flags field. */
++#define SHF_IA_64_SHORT 0x10000000 /* section near gp */
++#define SHF_IA_64_NORECOV 0x20000000 /* spec insns w/o recovery */
++
++/* Processor specific values for the Dyn d_tag field. */
++#define DT_IA_64_PLT_RESERVE (DT_LOPROC + 0)
++#define DT_IA_64_NUM 1
++
++/* IA-64 relocations. */
++#define R_IA64_NONE 0x00 /* none */
++#define R_IA64_IMM14 0x21 /* symbol + addend, add imm14 */
++#define R_IA64_IMM22 0x22 /* symbol + addend, add imm22 */
++#define R_IA64_IMM64 0x23 /* symbol + addend, mov imm64 */
++#define R_IA64_DIR32MSB 0x24 /* symbol + addend, data4 MSB */
++#define R_IA64_DIR32LSB 0x25 /* symbol + addend, data4 LSB */
++#define R_IA64_DIR64MSB 0x26 /* symbol + addend, data8 MSB */
++#define R_IA64_DIR64LSB 0x27 /* symbol + addend, data8 LSB */
++#define R_IA64_GPREL22 0x2a /* @gprel(sym + add), add imm22 */
++#define R_IA64_GPREL64I 0x2b /* @gprel(sym + add), mov imm64 */
++#define R_IA64_GPREL32MSB 0x2c /* @gprel(sym + add), data4 MSB */
++#define R_IA64_GPREL32LSB 0x2d /* @gprel(sym + add), data4 LSB */
++#define R_IA64_GPREL64MSB 0x2e /* @gprel(sym + add), data8 MSB */
++#define R_IA64_GPREL64LSB 0x2f /* @gprel(sym + add), data8 LSB */
++#define R_IA64_LTOFF22 0x32 /* @ltoff(sym + add), add imm22 */
++#define R_IA64_LTOFF64I 0x33 /* @ltoff(sym + add), mov imm64 */
++#define R_IA64_PLTOFF22 0x3a /* @pltoff(sym + add), add imm22 */
++#define R_IA64_PLTOFF64I 0x3b /* @pltoff(sym + add), mov imm64 */
++#define R_IA64_PLTOFF64MSB 0x3e /* @pltoff(sym + add), data8 MSB */
++#define R_IA64_PLTOFF64LSB 0x3f /* @pltoff(sym + add), data8 LSB */
++#define R_IA64_FPTR64I 0x43 /* @fptr(sym + add), mov imm64 */
++#define R_IA64_FPTR32MSB 0x44 /* @fptr(sym + add), data4 MSB */
++#define R_IA64_FPTR32LSB 0x45 /* @fptr(sym + add), data4 LSB */
++#define R_IA64_FPTR64MSB 0x46 /* @fptr(sym + add), data8 MSB */
++#define R_IA64_FPTR64LSB 0x47 /* @fptr(sym + add), data8 LSB */
++#define R_IA64_PCREL60B 0x48 /* @pcrel(sym + add), brl */
++#define R_IA64_PCREL21B 0x49 /* @pcrel(sym + add), ptb, call */
++#define R_IA64_PCREL21M 0x4a /* @pcrel(sym + add), chk.s */
++#define R_IA64_PCREL21F 0x4b /* @pcrel(sym + add), fchkf */
++#define R_IA64_PCREL32MSB 0x4c /* @pcrel(sym + add), data4 MSB */
++#define R_IA64_PCREL32LSB 0x4d /* @pcrel(sym + add), data4 LSB */
++#define R_IA64_PCREL64MSB 0x4e /* @pcrel(sym + add), data8 MSB */
++#define R_IA64_PCREL64LSB 0x4f /* @pcrel(sym + add), data8 LSB */
++#define R_IA64_LTOFF_FPTR22 0x52 /* @ltoff(@fptr(s+a)), imm22 */
++#define R_IA64_LTOFF_FPTR64I 0x53 /* @ltoff(@fptr(s+a)), imm64 */
++#define R_IA64_LTOFF_FPTR32MSB 0x54 /* @ltoff(@fptr(s+a)), data4 MSB */
++#define R_IA64_LTOFF_FPTR32LSB 0x55 /* @ltoff(@fptr(s+a)), data4 LSB */
++#define R_IA64_LTOFF_FPTR64MSB 0x56 /* @ltoff(@fptr(s+a)), data8 MSB */
++#define R_IA64_LTOFF_FPTR64LSB 0x57 /* @ltoff(@fptr(s+a)), data8 LSB */
++#define R_IA64_SEGREL32MSB 0x5c /* @segrel(sym + add), data4 MSB */
++#define R_IA64_SEGREL32LSB 0x5d /* @segrel(sym + add), data4 LSB */
++#define R_IA64_SEGREL64MSB 0x5e /* @segrel(sym + add), data8 MSB */
++#define R_IA64_SEGREL64LSB 0x5f /* @segrel(sym + add), data8 LSB */
++#define R_IA64_SECREL32MSB 0x64 /* @secrel(sym + add), data4 MSB */
++#define R_IA64_SECREL32LSB 0x65 /* @secrel(sym + add), data4 LSB */
++#define R_IA64_SECREL64MSB 0x66 /* @secrel(sym + add), data8 MSB */
++#define R_IA64_SECREL64LSB 0x67 /* @secrel(sym + add), data8 LSB */
++#define R_IA64_REL32MSB 0x6c /* data 4 + REL */
++#define R_IA64_REL32LSB 0x6d /* data 4 + REL */
++#define R_IA64_REL64MSB 0x6e /* data 8 + REL */
++#define R_IA64_REL64LSB 0x6f /* data 8 + REL */
++#define R_IA64_LTV32MSB 0x74 /* symbol + addend, data4 MSB */
++#define R_IA64_LTV32LSB 0x75 /* symbol + addend, data4 LSB */
++#define R_IA64_LTV64MSB 0x76 /* symbol + addend, data8 MSB */
++#define R_IA64_LTV64LSB 0x77 /* symbol + addend, data8 LSB */
++#define R_IA64_PCREL21BI 0x79 /* @pcrel(sym + add), 21bit inst */
++#define R_IA64_PCREL22 0x7a /* @pcrel(sym + add), 22bit inst */
++#define R_IA64_PCREL64I 0x7b /* @pcrel(sym + add), 64bit inst */
++#define R_IA64_IPLTMSB 0x80 /* dynamic reloc, imported PLT, MSB */
++#define R_IA64_IPLTLSB 0x81 /* dynamic reloc, imported PLT, LSB */
++#define R_IA64_COPY 0x84 /* copy relocation */
++#define R_IA64_SUB 0x85 /* Addend and symbol difference */
++#define R_IA64_LTOFF22X 0x86 /* LTOFF22, relaxable. */
++#define R_IA64_LDXMOV 0x87 /* Use of LTOFF22X. */
++#define R_IA64_TPREL14 0x91 /* @tprel(sym + add), imm14 */
++#define R_IA64_TPREL22 0x92 /* @tprel(sym + add), imm22 */
++#define R_IA64_TPREL64I 0x93 /* @tprel(sym + add), imm64 */
++#define R_IA64_TPREL64MSB 0x96 /* @tprel(sym + add), data8 MSB */
++#define R_IA64_TPREL64LSB 0x97 /* @tprel(sym + add), data8 LSB */
++#define R_IA64_LTOFF_TPREL22 0x9a /* @ltoff(@tprel(s+a)), imm2 */
++#define R_IA64_DTPMOD64MSB 0xa6 /* @dtpmod(sym + add), data8 MSB */
++#define R_IA64_DTPMOD64LSB 0xa7 /* @dtpmod(sym + add), data8 LSB */
++#define R_IA64_LTOFF_DTPMOD22 0xaa /* @ltoff(@dtpmod(sym + add)), imm22 */
++#define R_IA64_DTPREL14 0xb1 /* @dtprel(sym + add), imm14 */
++#define R_IA64_DTPREL22 0xb2 /* @dtprel(sym + add), imm22 */
++#define R_IA64_DTPREL64I 0xb3 /* @dtprel(sym + add), imm64 */
++#define R_IA64_DTPREL32MSB 0xb4 /* @dtprel(sym + add), data4 MSB */
++#define R_IA64_DTPREL32LSB 0xb5 /* @dtprel(sym + add), data4 LSB */
++#define R_IA64_DTPREL64MSB 0xb6 /* @dtprel(sym + add), data8 MSB */
++#define R_IA64_DTPREL64LSB 0xb7 /* @dtprel(sym + add), data8 LSB */
++#define R_IA64_LTOFF_DTPREL22 0xba /* @ltoff(@dtprel(s+a)), imm22 */
++
++/* SH specific declarations */
++
++/* SH relocs. */
++#define R_SH_NONE 0
++#define R_SH_DIR32 1
++#define R_SH_REL32 2
++#define R_SH_DIR8WPN 3
++#define R_SH_IND12W 4
++#define R_SH_DIR8WPL 5
++#define R_SH_DIR8WPZ 6
++#define R_SH_DIR8BP 7
++#define R_SH_DIR8W 8
++#define R_SH_DIR8L 9
++#define R_SH_SWITCH16 25
++#define R_SH_SWITCH32 26
++#define R_SH_USES 27
++#define R_SH_COUNT 28
++#define R_SH_ALIGN 29
++#define R_SH_CODE 30
++#define R_SH_DATA 31
++#define R_SH_LABEL 32
++#define R_SH_SWITCH8 33
++#define R_SH_GNU_VTINHERIT 34
++#define R_SH_GNU_VTENTRY 35
++#define R_SH_TLS_GD_32 144
++#define R_SH_TLS_LD_32 145
++#define R_SH_TLS_LDO_32 146
++#define R_SH_TLS_IE_32 147
++#define R_SH_TLS_LE_32 148
++#define R_SH_TLS_DTPMOD32 149
++#define R_SH_TLS_DTPOFF32 150
++#define R_SH_TLS_TPOFF32 151
++#define R_SH_GOT32 160
++#define R_SH_PLT32 161
++#define R_SH_COPY 162
++#define R_SH_GLOB_DAT 163
++#define R_SH_JMP_SLOT 164
++#define R_SH_RELATIVE 165
++#define R_SH_GOTOFF 166
++#define R_SH_GOTPC 167
++/* Keep this the last entry. */
++#define R_SH_NUM 256
++
++/* Additional s390 relocs */
++
++#define R_390_NONE 0 /* No reloc. */
++#define R_390_8 1 /* Direct 8 bit. */
++#define R_390_12 2 /* Direct 12 bit. */
++#define R_390_16 3 /* Direct 16 bit. */
++#define R_390_32 4 /* Direct 32 bit. */
++#define R_390_PC32 5 /* PC relative 32 bit. */
++#define R_390_GOT12 6 /* 12 bit GOT offset. */
++#define R_390_GOT32 7 /* 32 bit GOT offset. */
++#define R_390_PLT32 8 /* 32 bit PC relative PLT address. */
++#define R_390_COPY 9 /* Copy symbol at runtime. */
++#define R_390_GLOB_DAT 10 /* Create GOT entry. */
++#define R_390_JMP_SLOT 11 /* Create PLT entry. */
++#define R_390_RELATIVE 12 /* Adjust by program base. */
++#define R_390_GOTOFF32 13 /* 32 bit offset to GOT. */
++#define R_390_GOTPC 14 /* 32 bit PC relative offset to GOT. */
++#define R_390_GOT16 15 /* 16 bit GOT offset. */
++#define R_390_PC16 16 /* PC relative 16 bit. */
++#define R_390_PC16DBL 17 /* PC relative 16 bit shifted by 1. */
++#define R_390_PLT16DBL 18 /* 16 bit PC rel. PLT shifted by 1. */
++#define R_390_PC32DBL 19 /* PC relative 32 bit shifted by 1. */
++#define R_390_PLT32DBL 20 /* 32 bit PC rel. PLT shifted by 1. */
++#define R_390_GOTPCDBL 21 /* 32 bit PC rel. GOT shifted by 1. */
++#define R_390_64 22 /* Direct 64 bit. */
++#define R_390_PC64 23 /* PC relative 64 bit. */
++#define R_390_GOT64 24 /* 64 bit GOT offset. */
++#define R_390_PLT64 25 /* 64 bit PC relative PLT address. */
++#define R_390_GOTENT 26 /* 32 bit PC rel. to GOT entry >> 1. */
++#define R_390_GOTOFF16 27 /* 16 bit offset to GOT. */
++#define R_390_GOTOFF64 28 /* 64 bit offset to GOT. */
++#define R_390_GOTPLT12 29 /* 12 bit offset to jump slot. */
++#define R_390_GOTPLT16 30 /* 16 bit offset to jump slot. */
++#define R_390_GOTPLT32 31 /* 32 bit offset to jump slot. */
++#define R_390_GOTPLT64 32 /* 64 bit offset to jump slot. */
++#define R_390_GOTPLTENT 33 /* 32 bit rel. offset to jump slot. */
++#define R_390_PLTOFF16 34 /* 16 bit offset from GOT to PLT. */
++#define R_390_PLTOFF32 35 /* 32 bit offset from GOT to PLT. */
++#define R_390_PLTOFF64 36 /* 16 bit offset from GOT to PLT. */
++#define R_390_TLS_LOAD 37 /* Tag for load insn in TLS code. */
++#define R_390_TLS_GDCALL 38 /* Tag for function call in general
++ dynamic TLS code. */
++#define R_390_TLS_LDCALL 39 /* Tag for function call in local
++ dynamic TLS code. */
++#define R_390_TLS_GD32 40 /* Direct 32 bit for general dynamic
++ thread local data. */
++#define R_390_TLS_GD64 41 /* Direct 64 bit for general dynamic
++ thread local data. */
++#define R_390_TLS_GOTIE12 42 /* 12 bit GOT offset for static TLS
++ block offset. */
++#define R_390_TLS_GOTIE32 43 /* 32 bit GOT offset for static TLS
++ block offset. */
++#define R_390_TLS_GOTIE64 44 /* 64 bit GOT offset for static TLS
++ block offset. */
++#define R_390_TLS_LDM32 45 /* Direct 32 bit for local dynamic
++ thread local data in LE code. */
++#define R_390_TLS_LDM64 46 /* Direct 64 bit for local dynamic
++ thread local data in LE code. */
++#define R_390_TLS_IE32 47 /* 32 bit address of GOT entry for
++ negated static TLS block offset. */
++#define R_390_TLS_IE64 48 /* 64 bit address of GOT entry for
++ negated static TLS block offset. */
++#define R_390_TLS_IEENT 49 /* 32 bit rel. offset to GOT entry for
++ negated static TLS block offset. */
++#define R_390_TLS_LE32 50 /* 32 bit negated offset relative to
++ static TLS block. */
++#define R_390_TLS_LE64 51 /* 64 bit negated offset relative to
++ static TLS block. */
++#define R_390_TLS_LDO32 52 /* 32 bit offset relative to TLS
++ block. */
++#define R_390_TLS_LDO64 53 /* 64 bit offset relative to TLS
++ block. */
++#define R_390_TLS_DTPMOD 54 /* ID of module containing symbol. */
++#define R_390_TLS_DTPOFF 55 /* Offset in TLS block. */
++#define R_390_TLS_TPOFF 56 /* Negated offset in static TLS
++ block. */
++
++/* Keep this the last entry. */
++#define R_390_NUM 57
++
++/* CRIS relocations. */
++#define R_CRIS_NONE 0
++#define R_CRIS_8 1
++#define R_CRIS_16 2
++#define R_CRIS_32 3
++#define R_CRIS_8_PCREL 4
++#define R_CRIS_16_PCREL 5
++#define R_CRIS_32_PCREL 6
++#define R_CRIS_GNU_VTINHERIT 7
++#define R_CRIS_GNU_VTENTRY 8
++#define R_CRIS_COPY 9
++#define R_CRIS_GLOB_DAT 10
++#define R_CRIS_JUMP_SLOT 11
++#define R_CRIS_RELATIVE 12
++#define R_CRIS_16_GOT 13
++#define R_CRIS_32_GOT 14
++#define R_CRIS_16_GOTPLT 15
++#define R_CRIS_32_GOTPLT 16
++#define R_CRIS_32_GOTREL 17
++#define R_CRIS_32_PLT_GOTREL 18
++#define R_CRIS_32_PLT_PCREL 19
++
++#define R_CRIS_NUM 20
++
++/* AMD x86-64 relocations. */
++#define R_X86_64_NONE 0 /* No reloc */
++#define R_X86_64_64 1 /* Direct 64 bit */
++#define R_X86_64_PC32 2 /* PC relative 32 bit signed */
++#define R_X86_64_GOT32 3 /* 32 bit GOT entry */
++#define R_X86_64_PLT32 4 /* 32 bit PLT address */
++#define R_X86_64_COPY 5 /* Copy symbol at runtime */
++#define R_X86_64_GLOB_DAT 6 /* Create GOT entry */
++#define R_X86_64_JUMP_SLOT 7 /* Create PLT entry */
++#define R_X86_64_RELATIVE 8 /* Adjust by program base */
++#define R_X86_64_GOTPCREL 9 /* 32 bit signed PC relative
++ offset to GOT */
++#define R_X86_64_32 10 /* Direct 32 bit zero extended */
++#define R_X86_64_32S 11 /* Direct 32 bit sign extended */
++#define R_X86_64_16 12 /* Direct 16 bit zero extended */
++#define R_X86_64_PC16 13 /* 16 bit sign extended pc relative */
++#define R_X86_64_8 14 /* Direct 8 bit sign extended */
++#define R_X86_64_PC8 15 /* 8 bit sign extended pc relative */
++#define R_X86_64_DTPMOD64 16 /* ID of module containing symbol */
++#define R_X86_64_DTPOFF64 17 /* Offset in module's TLS block */
++#define R_X86_64_TPOFF64 18 /* Offset in initial TLS block */
++#define R_X86_64_TLSGD 19 /* 32 bit signed PC relative offset
++ to two GOT entries for GD symbol */
++#define R_X86_64_TLSLD 20 /* 32 bit signed PC relative offset
++ to two GOT entries for LD symbol */
++#define R_X86_64_DTPOFF32 21 /* Offset in TLS block */
++#define R_X86_64_GOTTPOFF 22 /* 32 bit signed PC relative offset
++ to GOT entry for IE symbol */
++#define R_X86_64_TPOFF32 23 /* Offset in initial TLS block */
++
++#define R_X86_64_NUM 24
++
++__END_DECLS
++
++#endif /* elf.h */
+
+ #include "elfconfig.h"
+
+@@ -195,3 +2641,4 @@
+ void fatal(const char *fmt, ...);
+ void warn(const char *fmt, ...);
+ void merror(const char *fmt, ...);
++
+diff -Nur linux-2.6.36.orig/scripts/mod/sumversion.c linux-2.6.36/scripts/mod/sumversion.c
+--- linux-2.6.36.orig/scripts/mod/sumversion.c 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/scripts/mod/sumversion.c 2010-11-28 18:33:24.000000000 +0100
+@@ -1,4 +1,4 @@
+-#include <netinet/in.h>
++/* #include <netinet/in.h> */
+ #ifdef __sun__
+ #include <inttypes.h>
+ #else
diff --git a/target/linux/patches/3.0.4/cris-etrax.patch b/target/linux/patches/3.0.4/cris-etrax.patch
new file mode 100644
index 000000000..a80d9a8b8
--- /dev/null
+++ b/target/linux/patches/3.0.4/cris-etrax.patch
@@ -0,0 +1,12 @@
+diff -Nur linux-2.6.39.orig/arch/cris/arch-v32/drivers/i2c.h linux-2.6.39/arch/cris/arch-v32/drivers/i2c.h
+--- linux-2.6.39.orig/arch/cris/arch-v32/drivers/i2c.h 2011-05-19 06:06:34.000000000 +0200
++++ linux-2.6.39/arch/cris/arch-v32/drivers/i2c.h 2011-08-24 19:15:05.000000000 +0200
+@@ -2,7 +2,7 @@
+ #include <linux/init.h>
+
+ /* High level I2C actions */
+-int __init i2c_init(void);
++static int __init i2c_init(void);
+ int i2c_write(unsigned char theSlave, void *data, size_t nbytes);
+ int i2c_read(unsigned char theSlave, void *data, size_t nbytes);
+ int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue);
diff --git a/target/linux/patches/3.0.4/fon2100.patch b/target/linux/patches/3.0.4/fon2100.patch
new file mode 100644
index 000000000..038ff7020
--- /dev/null
+++ b/target/linux/patches/3.0.4/fon2100.patch
@@ -0,0 +1,6279 @@
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/Kbuild.platforms linux-2.6.39-rc7/arch/mips/Kbuild.platforms
+--- linux-2.6.39-rc7.orig/arch/mips/Kbuild.platforms 2011-05-10 04:33:54.000000000 +0200
++++ linux-2.6.39-rc7/arch/mips/Kbuild.platforms 2011-05-15 21:34:57.000000000 +0200
+@@ -6,6 +6,7 @@
+ platforms += bcm47xx
+ platforms += bcm63xx
+ platforms += cavium-octeon
++platforms += ar231x
+ platforms += cobalt
+ platforms += dec
+ platforms += emma
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/Kconfig linux-2.6.39-rc7/arch/mips/Kconfig
+--- linux-2.6.39-rc7.orig/arch/mips/Kconfig 2011-05-10 04:33:54.000000000 +0200
++++ linux-2.6.39-rc7/arch/mips/Kconfig 2011-05-16 12:11:11.000000000 +0200
+@@ -121,6 +121,21 @@
+ help
+ Support for BCM63XX based boards
+
++config ATHEROS_AR231X
++ bool "Atheros 231x/531x SoC support"
++ select CEVT_R4K
++ select CSRC_R4K
++ select DMA_NONCOHERENT
++ select IRQ_CPU
++ select SYS_HAS_CPU_MIPS32_R1
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select GENERIC_GPIO
++ select SYS_HAS_EARLY_PRINTK
++ select SYS_SUPPORTS_ZBOOT
++ help
++ Support for AR231x and AR531x based boards
++
+ config MIPS_COBALT
+ bool "Cobalt Server"
+ select CEVT_R4K
+@@ -738,6 +753,7 @@
+
+ endchoice
+
++source "arch/mips/ar231x/Kconfig"
+ source "arch/mips/alchemy/Kconfig"
+ source "arch/mips/ath79/Kconfig"
+ source "arch/mips/bcm63xx/Kconfig"
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/ar231x/Kconfig linux-2.6.39-rc7/arch/mips/ar231x/Kconfig
+--- linux-2.6.39-rc7.orig/arch/mips/ar231x/Kconfig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/ar231x/Kconfig 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,27 @@
++config ATHEROS_AR5312
++ bool "Atheros 5312/2312+ support"
++ depends on ATHEROS_AR231X
++ default y
++
++config ATHEROS_AR2315
++ bool "Atheros 2315+ support"
++ depends on ATHEROS_AR231X
++ select DMA_NONCOHERENT
++ select CEVT_R4K
++ select CSRC_R4K
++ select IRQ_CPU
++ select SYS_HAS_CPU_MIPS32_R1
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select GENERIC_GPIO
++ default y
++
++config ATHEROS_AR2315_PCI
++ bool "PCI support"
++ depends on ATHEROS_AR2315
++ select HW_HAS_PCI
++ select PCI
++ select USB_ARCH_HAS_HCD
++ select USB_ARCH_HAS_OHCI
++ select USB_ARCH_HAS_EHCI
++ default n
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/ar231x/Makefile linux-2.6.39-rc7/arch/mips/ar231x/Makefile
+--- linux-2.6.39-rc7.orig/arch/mips/ar231x/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/ar231x/Makefile 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,17 @@
++#
++# This file is subject to the terms and conditions of the GNU General Public
++# License. See the file "COPYING" in the main directory of this archive
++# for more details.
++#
++# Copyright (C) 2006 FON Technology, SL.
++# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++# Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++#
++
++obj-y += board.o prom.o devices.o
++
++obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
++
++obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
++obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
++obj-$(CONFIG_ATHEROS_AR2315_PCI) += pci.o
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/ar231x/Platform linux-2.6.39-rc7/arch/mips/ar231x/Platform
+--- linux-2.6.39-rc7.orig/arch/mips/ar231x/Platform 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/ar231x/Platform 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,6 @@
++#
++# Atheros AR5312/AR2312 WiSoC
++#
++platform-$(CONFIG_ATHEROS_AR231X) += ar231x/
++cflags-$(CONFIG_ATHEROS_AR231X) += -I$(srctree)/arch/mips/include/asm/mach-ar231x
++load-$(CONFIG_ATHEROS_AR231X) += 0xffffffff80041000
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/ar231x/ar2315.c linux-2.6.39-rc7/arch/mips/ar231x/ar2315.c
+--- linux-2.6.39-rc7.orig/arch/mips/ar231x/ar2315.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/ar231x/ar2315.c 2011-05-15 21:47:07.000000000 +0200
+@@ -0,0 +1,654 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
++ */
++
++/*
++ * Platform devices for Atheros SoCs
++ */
++
++#include <generated/autoconf.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/string.h>
++#include <linux/platform_device.h>
++#include <linux/kernel.h>
++#include <linux/reboot.h>
++#include <linux/delay.h>
++#include <linux/leds.h>
++#include <asm/bootinfo.h>
++#include <asm/reboot.h>
++#include <asm/time.h>
++#include <asm/irq.h>
++#include <asm/io.h>
++#include <asm/gpio.h>
++
++#include <ar231x_platform.h>
++#include <ar2315_regs.h>
++#include <ar231x.h>
++#include "devices.h"
++#include "ar2315.h"
++
++static u32 gpiointmask = 0, gpiointval = 0;
++
++static inline void ar2315_gpio_irq(void)
++{
++ u32 pend;
++ int bit = -1;
++
++ /* only do one gpio interrupt at a time */
++ pend = (ar231x_read_reg(AR2315_GPIO_DI) ^ gpiointval) & gpiointmask;
++
++ if (pend) {
++ bit = fls(pend) - 1;
++ pend &= ~(1 << bit);
++ gpiointval ^= (1 << bit);
++ }
++
++ if (!pend)
++ ar231x_write_reg(AR2315_ISR, AR2315_ISR_GPIO);
++
++ /* Enable interrupt with edge detection */
++ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(bit)) != AR2315_GPIO_CR_I(bit))
++ return;
++
++ if (bit >= 0)
++ do_IRQ(AR531X_GPIO_IRQ_BASE + bit);
++}
++
++#ifdef CONFIG_ATHEROS_AR2315_PCI
++static inline void pci_abort_irq(void)
++{
++ ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_ABORT_INT);
++}
++
++static inline void pci_ack_irq(void)
++{
++ ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_EXT_INT);
++}
++
++void ar2315_pci_irq(int irq)
++{
++ if (ar231x_read_reg(AR2315_PCI_INT_STATUS) == AR2315_PCI_ABORT_INT)
++ pci_abort_irq();
++ else {
++ do_IRQ(irq);
++ pci_ack_irq();
++ }
++}
++#endif /* CONFIG_ATHEROS_AR2315_PCI */
++
++/*
++ * Called when an interrupt is received, this function
++ * determines exactly which interrupt it was, and it
++ * invokes the appropriate handler.
++ *
++ * Implicitly, we also define interrupt priority by
++ * choosing which to dispatch first.
++ */
++static asmlinkage void
++ar2315_irq_dispatch(void)
++{
++ int pending = read_c0_status() & read_c0_cause();
++
++ if (pending & CAUSEF_IP3)
++ do_IRQ(AR2315_IRQ_WLAN0_INTRS);
++ else if (pending & CAUSEF_IP4)
++ do_IRQ(AR2315_IRQ_ENET0_INTRS);
++#ifdef CONFIG_ATHEROS_AR2315_PCI
++ else if (pending & CAUSEF_IP5)
++ ar2315_pci_irq(AR2315_IRQ_LCBUS_PCI);
++#endif
++ else if (pending & CAUSEF_IP2) {
++ unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR);
++
++ if (misc_intr & AR2315_ISR_SPI)
++ do_IRQ(AR531X_MISC_IRQ_SPI);
++ else if (misc_intr & AR2315_ISR_TIMER)
++ do_IRQ(AR531X_MISC_IRQ_TIMER);
++ else if (misc_intr & AR2315_ISR_AHB)
++ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
++ else if (misc_intr & AR2315_ISR_GPIO)
++ ar2315_gpio_irq();
++ else if (misc_intr & AR2315_ISR_UART0)
++ do_IRQ(AR531X_MISC_IRQ_UART0);
++ else if (misc_intr & AR2315_ISR_WD)
++ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
++ else
++ do_IRQ(AR531X_MISC_IRQ_NONE);
++ } else if (pending & CAUSEF_IP7)
++ do_IRQ(AR531X_IRQ_CPU_CLOCK);
++}
++
++static void ar2315_set_gpiointmask(int gpio, int level)
++{
++ u32 reg;
++
++ reg = ar231x_read_reg(AR2315_GPIO_INT);
++ reg &= ~(AR2315_GPIO_INT_M | AR2315_GPIO_INT_LVL_M);
++ reg |= gpio | AR2315_GPIO_INT_LVL(level);
++ ar231x_write_reg(AR2315_GPIO_INT, reg);
++}
++
++static void ar2315_gpio_intr_enable(struct irq_data *d)
++{
++ unsigned int gpio = d->irq - AR531X_GPIO_IRQ_BASE;
++
++ /* Enable interrupt with edge detection */
++ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(gpio)) != AR2315_GPIO_CR_I(gpio))
++ return;
++
++ gpiointmask |= (1 << gpio);
++ ar2315_set_gpiointmask(gpio, 3);
++}
++
++static void ar2315_gpio_intr_disable(struct irq_data *d)
++{
++ unsigned int gpio = d->irq - AR531X_GPIO_IRQ_BASE;
++
++ /* Disable interrupt */
++ gpiointmask &= ~(1 << gpio);
++ ar2315_set_gpiointmask(gpio, 0);
++}
++
++static struct irq_chip ar2315_gpio_intr_controller = {
++ .name = "AR2315-GPIO",
++ .irq_ack = ar2315_gpio_intr_disable,
++ .irq_mask_ack = ar2315_gpio_intr_disable,
++ .irq_mask = ar2315_gpio_intr_disable,
++ .irq_unmask = ar2315_gpio_intr_enable,
++};
++
++static void
++ar2315_misc_intr_enable(struct irq_data *d)
++{
++ unsigned int imr;
++
++ imr = ar231x_read_reg(AR2315_IMR);
++ switch(d->irq) {
++ case AR531X_MISC_IRQ_SPI:
++ imr |= AR2315_ISR_SPI;
++ break;
++ case AR531X_MISC_IRQ_TIMER:
++ imr |= AR2315_ISR_TIMER;
++ break;
++ case AR531X_MISC_IRQ_AHB_PROC:
++ imr |= AR2315_ISR_AHB;
++ break;
++ case AR531X_MISC_IRQ_GPIO:
++ imr |= AR2315_ISR_GPIO;
++ break;
++ case AR531X_MISC_IRQ_UART0:
++ imr |= AR2315_ISR_UART0;
++ break;
++ case AR531X_MISC_IRQ_WATCHDOG:
++ imr |= AR2315_ISR_WD;
++ break;
++ default:
++ break;
++ }
++ ar231x_write_reg(AR2315_IMR, imr);
++}
++
++static void
++ar2315_misc_intr_disable(struct irq_data *d)
++{
++ unsigned int imr;
++
++ imr = ar231x_read_reg(AR2315_IMR);
++ switch(d->irq) {
++ case AR531X_MISC_IRQ_SPI:
++ imr &= ~AR2315_ISR_SPI;
++ break;
++ case AR531X_MISC_IRQ_TIMER:
++ imr &= ~AR2315_ISR_TIMER;
++ break;
++ case AR531X_MISC_IRQ_AHB_PROC:
++ imr &= ~AR2315_ISR_AHB;
++ break;
++ case AR531X_MISC_IRQ_GPIO:
++ imr &= ~AR2315_ISR_GPIO;
++ break;
++ case AR531X_MISC_IRQ_UART0:
++ imr &= ~AR2315_ISR_UART0;
++ break;
++ case AR531X_MISC_IRQ_WATCHDOG:
++ imr &= ~AR2315_ISR_WD;
++ break;
++ default:
++ break;
++ }
++ ar231x_write_reg(AR2315_IMR, imr);
++}
++
++
++static struct irq_chip ar2315_misc_intr_controller = {
++ .name = "AR2315-MISC",
++ .irq_mask = ar2315_misc_intr_disable,
++ .irq_unmask = ar2315_misc_intr_enable,
++};
++
++static irqreturn_t ar2315_ahb_proc_handler(int cpl, void *dev_id)
++{
++ ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET);
++ ar231x_read_reg(AR2315_AHB_ERR1);
++
++ printk(KERN_ERR "AHB fatal error\n");
++ machine_restart("AHB error"); /* Catastrophic failure */
++
++ return IRQ_HANDLED;
++}
++
++static struct irqaction ar2315_ahb_proc_interrupt = {
++ .handler = ar2315_ahb_proc_handler,
++ .flags = IRQF_DISABLED,
++ .name = "ar2315_ahb_proc_interrupt",
++};
++
++static struct irqaction cascade = {
++ .handler = no_action,
++ .flags = IRQF_DISABLED,
++ .name = "cascade",
++};
++
++void
++ar2315_irq_init(void)
++{
++ int i;
++
++ if (!is_2315())
++ return;
++
++ ar231x_irq_dispatch = ar2315_irq_dispatch;
++ gpiointval = ar231x_read_reg(AR2315_GPIO_DI);
++ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
++ int irq = AR531X_MISC_IRQ_BASE + i;
++ irq_set_chip_and_handler(irq, &ar2315_misc_intr_controller,
++ handle_level_irq);
++ }
++ for (i = 0; i < AR531X_GPIO_IRQ_COUNT; i++) {
++ int irq = AR531X_GPIO_IRQ_BASE + i;
++ irq_set_chip_and_handler(irq, &ar2315_gpio_intr_controller,
++ handle_level_irq);
++ }
++ setup_irq(AR531X_MISC_IRQ_GPIO, &cascade);
++ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar2315_ahb_proc_interrupt);
++ setup_irq(AR2315_IRQ_MISC_INTRS, &cascade);
++}
++
++const struct ar231x_gpiodev ar2315_gpiodev;
++
++static u32
++ar2315_gpio_get_output(void)
++{
++ u32 reg;
++ reg = ar231x_read_reg(AR2315_GPIO_CR);
++ reg &= ar2315_gpiodev.valid_mask;
++ return reg;
++}
++
++static u32
++ar2315_gpio_set_output(u32 mask, u32 val)
++{
++ u32 reg;
++
++ reg = ar231x_read_reg(AR2315_GPIO_CR);
++ reg &= ~mask;
++ reg |= val;
++ ar231x_write_reg(AR2315_GPIO_CR, reg);
++ return reg;
++}
++
++static u32
++ar2315_gpio_get(void)
++{
++ u32 reg;
++ reg = ar231x_read_reg(AR2315_GPIO_DI);
++ reg &= ar2315_gpiodev.valid_mask;
++ return reg;
++}
++
++static u32
++ar2315_gpio_set(u32 mask, u32 value)
++{
++ u32 reg;
++ reg = ar231x_read_reg(AR2315_GPIO_DO);
++ reg &= ~mask;
++ reg |= value;
++ ar231x_write_reg(AR2315_GPIO_DO, reg);
++ return reg;
++}
++
++const struct ar231x_gpiodev ar2315_gpiodev = {
++ .valid_mask = (1 << 22) - 1,
++ .get_output = ar2315_gpio_get_output,
++ .set_output = ar2315_gpio_set_output,
++ .get = ar2315_gpio_get,
++ .set = ar2315_gpio_set,
++};
++
++static struct ar231x_eth ar2315_eth_data = {
++ .reset_base = AR2315_RESET,
++ .reset_mac = AR2315_RESET_ENET0,
++ .reset_phy = AR2315_RESET_EPHY0,
++ .phy_base = KSEG1ADDR(AR2315_ENET0),
++ .config = &ar231x_board,
++};
++
++static struct resource ar2315_spiflash_res[] = {
++ {
++ .name = "flash_base",
++ .flags = IORESOURCE_MEM,
++ .start = KSEG1ADDR(AR2315_SPI_READ),
++ .end = KSEG1ADDR(AR2315_SPI_READ) + 0x1000000 - 1,
++ },
++ {
++ .name = "flash_regs",
++ .flags = IORESOURCE_MEM,
++ .start = 0x11300000,
++ .end = 0x11300012,
++ },
++};
++
++static struct platform_device ar2315_spiflash = {
++ .id = 0,
++ .name = "spiflash",
++ .resource = ar2315_spiflash_res,
++ .num_resources = ARRAY_SIZE(ar2315_spiflash_res)
++};
++
++static struct platform_device ar2315_wdt = {
++ .id = 0,
++ .name = "ar2315_wdt",
++};
++
++#define SPI_FLASH_CTL 0x00
++#define SPI_FLASH_OPCODE 0x04
++#define SPI_FLASH_DATA 0x08
++
++static inline u32
++spiflash_read_reg(int reg)
++{
++ return ar231x_read_reg(AR2315_SPI + reg);
++}
++
++static inline void
++spiflash_write_reg(int reg, u32 data)
++{
++ ar231x_write_reg(AR2315_SPI + reg, data);
++}
++
++static u32
++spiflash_wait_status(void)
++{
++ u32 reg;
++
++ do {
++ reg = spiflash_read_reg(SPI_FLASH_CTL);
++ } while (reg & SPI_CTL_BUSY);
++
++ return reg;
++}
++
++static u8
++spiflash_probe(void)
++{
++ u32 reg;
++
++ reg = spiflash_wait_status();
++ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
++ reg |= (1 << 4) | 4 | SPI_CTL_START;
++
++ spiflash_write_reg(SPI_FLASH_OPCODE, 0xab);
++ spiflash_write_reg(SPI_FLASH_CTL, reg);
++
++ reg = spiflash_wait_status();
++ reg = spiflash_read_reg(SPI_FLASH_DATA);
++ reg &= 0xff;
++
++ return (u8) reg;
++}
++
++
++#define STM_8MBIT_SIGNATURE 0x13
++#define STM_16MBIT_SIGNATURE 0x14
++#define STM_32MBIT_SIGNATURE 0x15
++#define STM_64MBIT_SIGNATURE 0x16
++#define STM_128MBIT_SIGNATURE 0x17
++
++static u8 __init *
++ar2315_flash_limit(void)
++{
++ u32 flash_size = 0;
++
++ /* probe the flash chip size */
++ switch(spiflash_probe()) {
++ case STM_8MBIT_SIGNATURE:
++ flash_size = 0x00100000;
++ break;
++ case STM_16MBIT_SIGNATURE:
++ flash_size = 0x00200000;
++ break;
++ case STM_32MBIT_SIGNATURE:
++ flash_size = 0x00400000;
++ break;
++ case STM_64MBIT_SIGNATURE:
++ flash_size = 0x00800000;
++ break;
++ case STM_128MBIT_SIGNATURE:
++ flash_size = 0x01000000;
++ break;
++ }
++
++ ar2315_spiflash_res[0].end = ar2315_spiflash_res[0].start +
++ flash_size - 1;
++ return (u8 *) ar2315_spiflash_res[0].end + 1;
++}
++
++#ifdef CONFIG_LEDS_GPIO
++static struct gpio_led ar2315_leds[6];
++static struct gpio_led_platform_data ar2315_led_data = {
++ .leds = (void *) ar2315_leds,
++};
++
++static struct platform_device ar2315_gpio_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = (void *) &ar2315_led_data,
++ }
++};
++
++static void __init
++ar2315_init_gpio(void)
++{
++ static char led_names[6][6];
++ int i, led = 0;
++
++ ar2315_led_data.num_leds = 0;
++ for(i = 1; i < 8; i++)
++ {
++ if((i == AR2315_RESET_GPIO) ||
++ (i == ar231x_board.config->resetConfigGpio))
++ continue;
++
++ if(i == ar231x_board.config->sysLedGpio)
++ strcpy(led_names[led], "wlan");
++ else
++ sprintf(led_names[led], "gpio%d", i);
++
++ ar2315_leds[led].name = led_names[led];
++ ar2315_leds[led].gpio = i;
++ ar2315_leds[led].active_low = 0;
++ led++;
++ }
++ ar2315_led_data.num_leds = led;
++ platform_device_register(&ar2315_gpio_leds);
++}
++#else
++static inline void ar2315_init_gpio(void)
++{
++}
++#endif
++
++int __init
++ar2315_init_devices(void)
++{
++ if (!is_2315())
++ return 0;
++
++ /* Find board configuration */
++ ar231x_find_config(ar2315_flash_limit());
++ ar2315_eth_data.macaddr = ar231x_board.config->enet0_mac;
++
++ ar2315_init_gpio();
++ platform_device_register(&ar2315_wdt);
++ platform_device_register(&ar2315_spiflash);
++ ar231x_add_ethernet(0, KSEG1ADDR(AR2315_ENET0), AR2315_IRQ_ENET0_INTRS,
++ &ar2315_eth_data);
++ ar231x_add_wmac(0, AR2315_WLAN0, AR2315_IRQ_WLAN0_INTRS);
++
++ return 0;
++}
++
++static void
++ar2315_restart(char *command)
++{
++ void (*mips_reset_vec)(void) = (void *) 0xbfc00000;
++
++ local_irq_disable();
++
++ /* try reset the system via reset control */
++ ar231x_write_reg(AR2315_COLD_RESET,AR2317_RESET_SYSTEM);
++
++ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround.
++ * give it some time to attempt a gpio based hardware reset
++ * (atheros reference design workaround) */
++ gpio_direction_output(AR2315_RESET_GPIO, 0);
++ mdelay(100);
++
++ /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
++ * workaround. Attempt to jump to the mips reset location -
++ * the boot loader itself might be able to recover the system */
++ mips_reset_vec();
++}
++
++
++/*
++ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
++ * to determine the predevisor value.
++ */
++static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
++static int __initdata PLLC_DIVIDE_TABLE[5] = { 2, 3, 4, 6, 3 };
++
++static unsigned int __init
++ar2315_sys_clk(unsigned int clockCtl)
++{
++ unsigned int pllcCtrl,cpuDiv;
++ unsigned int pllcOut,refdiv,fdiv,divby2;
++ unsigned int clkDiv;
++
++ pllcCtrl = ar231x_read_reg(AR2315_PLLC_CTL);
++ refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
++ refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv];
++ fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
++ divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
++ divby2 += 1;
++ pllcOut = (40000000/refdiv)*(2*divby2)*fdiv;
++
++
++ /* clkm input selected */
++ switch(clockCtl & CPUCLK_CLK_SEL_M) {
++ case 0:
++ case 1:
++ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S];
++ break;
++ case 2:
++ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S];
++ break;
++ default:
++ pllcOut = 40000000;
++ clkDiv = 1;
++ break;
++ }
++ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;
++ cpuDiv = cpuDiv * 2 ?: 1;
++ return (pllcOut/(clkDiv * cpuDiv));
++}
++
++static inline unsigned int
++ar2315_cpu_frequency(void)
++{
++ return ar2315_sys_clk(ar231x_read_reg(AR2315_CPUCLK));
++}
++
++static inline unsigned int
++ar2315_apb_frequency(void)
++{
++ return ar2315_sys_clk(ar231x_read_reg(AR2315_AMBACLK));
++}
++
++void __init
++ar2315_time_init(void)
++{
++ if (!is_2315())
++ return;
++
++ mips_hpt_frequency = ar2315_cpu_frequency() / 2;
++}
++
++void __init
++ar2315_prom_init(void)
++{
++ u32 memsize, memcfg, devid;
++
++ if (!is_2315())
++ return;
++
++ memcfg = ar231x_read_reg(AR2315_MEM_CFG);
++ memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S);
++ memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S);
++ memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S);
++ memsize <<= 3;
++ add_memory_region(0, memsize, BOOT_MEM_RAM);
++
++ /* Detect the hardware based on the device ID */
++ devid = ar231x_read_reg(AR2315_SREV) & AR2315_REV_CHIP;
++ switch(devid) {
++ case 0x90:
++ case 0x91:
++ ar231x_devtype = DEV_TYPE_AR2317;
++ break;
++ default:
++ ar231x_devtype = DEV_TYPE_AR2315;
++ break;
++ }
++ ar231x_gpiodev = &ar2315_gpiodev;
++ ar231x_board.devid = devid;
++}
++
++void __init
++ar2315_plat_setup(void)
++{
++ u32 config;
++
++ if (!is_2315())
++ return;
++
++ /* Clear any lingering AHB errors */
++ config = read_c0_config();
++ write_c0_config(config & ~0x3);
++ ar231x_write_reg(AR2315_AHB_ERR0,AHB_ERROR_DET);
++ ar231x_read_reg(AR2315_AHB_ERR1);
++ ar231x_write_reg(AR2315_WDC, AR2315_WDC_IGNORE_EXPIRATION);
++
++ _machine_restart = ar2315_restart;
++ ar231x_serial_setup(KSEG1ADDR(AR2315_UART0), ar2315_apb_frequency());
++}
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/ar231x/ar2315.h linux-2.6.39-rc7/arch/mips/ar231x/ar2315.h
+--- linux-2.6.39-rc7.orig/arch/mips/ar231x/ar2315.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/ar231x/ar2315.h 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,37 @@
++#ifndef __AR2315_H
++#define __AR2315_H
++
++#ifdef CONFIG_ATHEROS_AR2315
++
++extern void ar2315_irq_init(void);
++extern int ar2315_init_devices(void);
++extern void ar2315_prom_init(void);
++extern void ar2315_plat_setup(void);
++extern void ar2315_time_init(void);
++
++#else
++
++static inline void ar2315_irq_init(void)
++{
++}
++
++static inline int ar2315_init_devices(void)
++{
++ return 0;
++}
++
++static inline void ar2315_prom_init(void)
++{
++}
++
++static inline void ar2315_plat_setup(void)
++{
++}
++
++static inline void ar2315_time_init(void)
++{
++}
++
++#endif
++
++#endif
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/ar231x/ar5312.c linux-2.6.39-rc7/arch/mips/ar231x/ar5312.c
+--- linux-2.6.39-rc7.orig/arch/mips/ar231x/ar5312.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/ar231x/ar5312.c 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,538 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++ */
++
++/*
++ * Platform devices for Atheros SoCs
++ */
++
++#include <generated/autoconf.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/string.h>
++#include <linux/mtd/physmap.h>
++#include <linux/platform_device.h>
++#include <linux/kernel.h>
++#include <linux/reboot.h>
++#include <linux/leds.h>
++#include <asm/bootinfo.h>
++#include <asm/reboot.h>
++#include <asm/time.h>
++#include <asm/irq.h>
++#include <asm/io.h>
++#include <gpio.h>
++
++#include <ar231x_platform.h>
++#include <ar5312_regs.h>
++#include <ar231x.h>
++#include "devices.h"
++#include "ar5312.h"
++
++static void
++ar5312_misc_irq_dispatch(void)
++{
++ unsigned int ar231x_misc_intrs = ar231x_read_reg(AR531X_ISR) & ar231x_read_reg(AR531X_IMR);
++
++ if (ar231x_misc_intrs & AR531X_ISR_TIMER) {
++ do_IRQ(AR531X_MISC_IRQ_TIMER);
++ (void)ar231x_read_reg(AR531X_TIMER);
++ } else if (ar231x_misc_intrs & AR531X_ISR_AHBPROC)
++ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
++ else if ((ar231x_misc_intrs & AR531X_ISR_UART0))
++ do_IRQ(AR531X_MISC_IRQ_UART0);
++ else if (ar231x_misc_intrs & AR531X_ISR_WD)
++ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
++ else
++ do_IRQ(AR531X_MISC_IRQ_NONE);
++}
++
++static asmlinkage void
++ar5312_irq_dispatch(void)
++{
++ int pending = read_c0_status() & read_c0_cause();
++
++ if (pending & CAUSEF_IP2)
++ do_IRQ(AR5312_IRQ_WLAN0_INTRS);
++ else if (pending & CAUSEF_IP3)
++ do_IRQ(AR5312_IRQ_ENET0_INTRS);
++ else if (pending & CAUSEF_IP4)
++ do_IRQ(AR5312_IRQ_ENET1_INTRS);
++ else if (pending & CAUSEF_IP5)
++ do_IRQ(AR5312_IRQ_WLAN1_INTRS);
++ else if (pending & CAUSEF_IP6)
++ ar5312_misc_irq_dispatch();
++ else if (pending & CAUSEF_IP7)
++ do_IRQ(AR531X_IRQ_CPU_CLOCK);
++}
++
++
++/* Enable the specified AR531X_MISC_IRQ interrupt */
++static void
++ar5312_misc_intr_enable(struct irq_data *d)
++{
++ unsigned int imr;
++
++ imr = ar231x_read_reg(AR531X_IMR);
++ imr |= (1 << (d->irq - AR531X_MISC_IRQ_BASE - 1));
++ ar231x_write_reg(AR531X_IMR, imr);
++}
++
++/* Disable the specified AR531X_MISC_IRQ interrupt */
++static void
++ar5312_misc_intr_disable(struct irq_data *d)
++{
++ unsigned int imr;
++
++ imr = ar231x_read_reg(AR531X_IMR);
++ imr &= ~(1 << (d->irq - AR531X_MISC_IRQ_BASE - 1));
++ ar231x_write_reg(AR531X_IMR, imr);
++ ar231x_read_reg(AR531X_IMR); /* flush write buffer */
++}
++
++static struct irq_chip ar5312_misc_intr_controller = {
++ .name = "AR5312-MISC",
++ .irq_mask = ar5312_misc_intr_disable,
++ .irq_unmask = ar5312_misc_intr_enable,
++};
++
++
++static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id)
++{
++ u32 proc1 = ar231x_read_reg(AR531X_PROC1);
++ u32 procAddr = ar231x_read_reg(AR531X_PROCADDR); /* clears error state */
++ u32 dma1 = ar231x_read_reg(AR531X_DMA1);
++ u32 dmaAddr = ar231x_read_reg(AR531X_DMAADDR); /* clears error state */
++
++ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
++ procAddr, proc1, dmaAddr, dma1);
++
++ machine_restart("AHB error"); /* Catastrophic failure */
++ return IRQ_HANDLED;
++}
++
++
++static struct irqaction ar5312_ahb_proc_interrupt = {
++ .handler = ar5312_ahb_proc_handler,
++ .flags = IRQF_DISABLED,
++ .name = "ar5312_ahb_proc_interrupt",
++};
++
++
++static struct irqaction cascade = {
++ .handler = no_action,
++ .flags = IRQF_DISABLED,
++ .name = "cascade",
++};
++
++void __init ar5312_irq_init(void)
++{
++ int i;
++
++ if (!is_5312())
++ return;
++
++ ar231x_irq_dispatch = ar5312_irq_dispatch;
++ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
++ int irq = AR531X_MISC_IRQ_BASE + i;
++ irq_set_chip_and_handler(irq, &ar5312_misc_intr_controller,
++ handle_level_irq);
++ }
++ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt);
++ setup_irq(AR5312_IRQ_MISC_INTRS, &cascade);
++}
++
++const struct ar231x_gpiodev ar5312_gpiodev;
++
++static u32
++ar5312_gpio_get_output(void)
++{
++ u32 reg;
++ reg = ~(ar231x_read_reg(AR531X_GPIO_CR));
++ reg &= ar5312_gpiodev.valid_mask;
++ return reg;
++}
++
++static u32
++ar5312_gpio_set_output(u32 mask, u32 val)
++{
++ u32 reg;
++
++ reg = ar231x_read_reg(AR531X_GPIO_CR);
++ reg |= mask;
++ reg &= ~val;
++ ar231x_write_reg(AR531X_GPIO_CR, reg);
++ return reg;
++}
++
++static u32
++ar5312_gpio_get(void)
++{
++ u32 reg;
++ reg = ar231x_read_reg(AR531X_GPIO_DI);
++ reg &= ar5312_gpiodev.valid_mask;
++ return reg;
++}
++
++static u32
++ar5312_gpio_set(u32 mask, u32 value)
++{
++ u32 reg;
++ reg = ar231x_read_reg(AR531X_GPIO_DO);
++ reg &= ~mask;
++ reg |= value;
++ ar231x_write_reg(AR531X_GPIO_DO, reg);
++ return reg;
++}
++
++const struct ar231x_gpiodev ar5312_gpiodev = {
++ .valid_mask = (1 << 8) - 1,
++ .get_output = ar5312_gpio_get_output,
++ .set_output = ar5312_gpio_set_output,
++ .get = ar5312_gpio_get,
++ .set = ar5312_gpio_set,
++};
++
++static struct physmap_flash_data ar5312_flash_data = {
++ .width = 2,
++};
++
++static struct resource ar5312_flash_resource = {
++ .start = AR531X_FLASH,
++ .end = AR531X_FLASH + 0x800000 - 1,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct ar231x_eth ar5312_eth0_data = {
++ .reset_base = AR531X_RESET,
++ .reset_mac = AR531X_RESET_ENET0,
++ .reset_phy = AR531X_RESET_EPHY0,
++ .phy_base = KSEG1ADDR(AR531X_ENET0),
++ .config = &ar231x_board,
++};
++
++static struct ar231x_eth ar5312_eth1_data = {
++ .reset_base = AR531X_RESET,
++ .reset_mac = AR531X_RESET_ENET1,
++ .reset_phy = AR531X_RESET_EPHY1,
++ .phy_base = KSEG1ADDR(AR531X_ENET1),
++ .config = &ar231x_board,
++};
++
++static struct platform_device ar5312_physmap_flash = {
++ .name = "physmap-flash",
++ .id = 0,
++ .dev.platform_data = &ar5312_flash_data,
++ .resource = &ar5312_flash_resource,
++ .num_resources = 1,
++};
++
++#ifdef CONFIG_LEDS_GPIO
++static struct gpio_led ar5312_leds[] = {
++ { .name = "wlan", .gpio = 0, .active_low = 1, },
++};
++
++static const struct gpio_led_platform_data ar5312_led_data = {
++ .num_leds = ARRAY_SIZE(ar5312_leds),
++ .leds = (void *) ar5312_leds,
++};
++
++static struct platform_device ar5312_gpio_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev.platform_data = (void *) &ar5312_led_data,
++};
++#endif
++
++/*
++ * NB: This mapping size is larger than the actual flash size,
++ * but this shouldn't be a problem here, because the flash
++ * will simply be mapped multiple times.
++ */
++static char __init *ar5312_flash_limit(void)
++{
++ u32 ctl;
++ /*
++ * Configure flash bank 0.
++ * Assume 8M window size. Flash will be aliased if it's smaller
++ */
++ ctl = FLASHCTL_E |
++ FLASHCTL_AC_8M |
++ FLASHCTL_RBLE |
++ (0x01 << FLASHCTL_IDCY_S) |
++ (0x07 << FLASHCTL_WST1_S) |
++ (0x07 << FLASHCTL_WST2_S) |
++ (ar231x_read_reg(AR531X_FLASHCTL0) & FLASHCTL_MW);
++
++ ar231x_write_reg(AR531X_FLASHCTL0, ctl);
++
++ /* Disable other flash banks */
++ ar231x_write_reg(AR531X_FLASHCTL1,
++ ar231x_read_reg(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC));
++
++ ar231x_write_reg(AR531X_FLASHCTL2,
++ ar231x_read_reg(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
++
++ return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000);
++}
++
++int __init ar5312_init_devices(void)
++{
++ struct ar231x_boarddata *config;
++ u32 fctl = 0;
++ const u8 *radio;
++ u8 *c;
++
++ if (!is_5312())
++ return 0;
++
++ /* Locate board/radio config data */
++ ar231x_find_config(ar5312_flash_limit());
++ config = ar231x_board.config;
++
++
++ /*
++ * Chip IDs and hardware detection for some Atheros
++ * models are really broken!
++ *
++ * Atheros uses a disabled WMAC0 and Silicon ID of AR5312
++ * as indication for AR2312, which is otherwise
++ * indistinguishable from the real AR5312.
++ */
++ if (ar231x_board.radio) {
++ radio = ar231x_board.radio + AR531X_RADIO_MASK_OFF;
++ if ((*((const u32 *) radio) & AR531X_RADIO0_MASK) == 0)
++ config->flags |= BD_ISCASPER;
++ } else
++ radio = NULL;
++
++ /* AR2313 has CPU minor rev. 10 */
++ if ((current_cpu_data.processor_id & 0xff) == 0x0a)
++ ar231x_devtype = DEV_TYPE_AR2313;
++
++ /* AR2312 shares the same Silicon ID as AR5312 */
++ else if (config->flags & BD_ISCASPER)
++ ar231x_devtype = DEV_TYPE_AR2312;
++
++ /* Everything else is probably AR5312 or compatible */
++ else
++ ar231x_devtype = DEV_TYPE_AR5312;
++
++ /* fixup flash width */
++ fctl = ar231x_read_reg(AR531X_FLASHCTL) & FLASHCTL_MW;
++ switch (fctl) {
++ case FLASHCTL_MWx16:
++ ar5312_flash_data.width = 2;
++ break;
++ case FLASHCTL_MWx8:
++ default:
++ ar5312_flash_data.width = 1;
++ break;
++ }
++
++ platform_device_register(&ar5312_physmap_flash);
++
++#ifdef CONFIG_LEDS_GPIO
++ ar5312_leds[0].gpio = config->sysLedGpio;
++ platform_device_register(&ar5312_gpio_leds);
++#endif
++
++ /* Fix up MAC addresses if necessary */
++ if (!memcmp(config->enet0_mac, "\xff\xff\xff\xff\xff\xff", 6))
++ memcpy(config->enet0_mac, config->enet1_mac, 6);
++
++ /* If ENET0 and ENET1 have the same mac address,
++ * increment the one from ENET1 */
++ if (memcmp(config->enet0_mac, config->enet1_mac, 6) == 0) {
++ c = config->enet1_mac + 5;
++ while ((c >= config->enet1_mac) && !(++(*c)))
++ c--;
++ }
++
++ switch(ar231x_devtype) {
++ case DEV_TYPE_AR5312:
++ ar5312_eth0_data.macaddr = config->enet0_mac;
++ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET0),
++ AR5312_IRQ_ENET0_INTRS, &ar5312_eth0_data);
++
++ ar5312_eth1_data.macaddr = config->enet1_mac;
++ ar231x_add_ethernet(1, KSEG1ADDR(AR531X_ENET1),
++ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
++
++ if (!ar231x_board.radio)
++ return 0;
++
++ if ((*((u32 *) radio) & AR531X_RADIO0_MASK) &&
++ (config->flags & BD_WLAN0))
++ ar231x_add_wmac(0, AR531X_WLAN0,
++ AR5312_IRQ_WLAN0_INTRS);
++
++ break;
++ /*
++ * AR2312/3 ethernet uses the PHY of ENET0, but the MAC
++ * of ENET1. Atheros calls it 'twisted' for a reason :)
++ */
++ case DEV_TYPE_AR2312:
++ case DEV_TYPE_AR2313:
++ ar5312_eth1_data.phy_base = ar5312_eth0_data.phy_base;
++ ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy;
++ ar5312_eth1_data.macaddr = config->enet0_mac;
++ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET1),
++ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
++
++ if (!ar231x_board.radio)
++ return 0;
++ break;
++ default:
++ break;
++ }
++
++ if ((*((u32 *) radio) & AR531X_RADIO1_MASK) &&
++ (config->flags & BD_WLAN1))
++ ar231x_add_wmac(1, AR531X_WLAN1,
++ AR5312_IRQ_WLAN1_INTRS);
++
++ return 0;
++}
++
++
++static void ar5312_restart(char *command)
++{
++ /* reset the system */
++ local_irq_disable();
++ while(1) {
++ ar231x_write_reg(AR531X_RESET, AR531X_RESET_SYSTEM);
++ }
++}
++
++
++/*
++ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
++ * to determine the predevisor value.
++ */
++static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
++
++
++static int __init
++ar5312_cpu_frequency(void)
++{
++ unsigned int result;
++ unsigned int predivide_mask, predivide_shift;
++ unsigned int multiplier_mask, multiplier_shift;
++ unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier;
++ unsigned int doubler_mask;
++ u16 devid;
++
++ /* Trust the bootrom's idea of cpu frequency. */
++ if ((result = ar231x_read_reg(AR5312_SCRATCH)))
++ return result;
++
++ devid = ar231x_read_reg(AR531X_REV);
++ devid &= AR531X_REV_MAJ;
++ devid >>= AR531X_REV_MAJ_S;
++ if (devid == AR531X_REV_MAJ_AR2313) {
++ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
++ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
++ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
++ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
++ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
++ } else { /* AR5312 and AR2312 */
++ predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
++ predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
++ multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
++ multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
++ doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
++ }
++
++ /*
++ * Clocking is derived from a fixed 40MHz input clock.
++ *
++ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
++ * sysFreq = cpuFreq / 4 (used for APB clock, serial,
++ * flash, Timer, Watchdog Timer)
++ *
++ * cntFreq = cpuFreq / 2 (use for CPU count/compare)
++ *
++ * So, for example, with a PLL multiplier of 5, we have
++ *
++ * cpuFreq = 200MHz
++ * sysFreq = 50MHz
++ * cntFreq = 100MHz
++ *
++ * We compute the CPU frequency, based on PLL settings.
++ */
++
++ clockCtl1 = ar231x_read_reg(AR5312_CLOCKCTL1);
++ preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift;
++ preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
++ multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift;
++
++ if (clockCtl1 & doubler_mask) {
++ multiplier = multiplier << 1;
++ }
++ return (40000000 / preDivisor) * multiplier;
++}
++
++static inline int
++ar5312_sys_frequency(void)
++{
++ return ar5312_cpu_frequency() / 4;
++}
++
++void __init
++ar5312_time_init(void)
++{
++ if (!is_5312())
++ return;
++
++ mips_hpt_frequency = ar5312_cpu_frequency() / 2;
++}
++
++
++void __init
++ar5312_prom_init(void)
++{
++ u32 memsize, memcfg, bank0AC, bank1AC;
++ u32 devid;
++
++ if (!is_5312())
++ return;
++
++ /* Detect memory size */
++ memcfg = ar231x_read_reg(AR531X_MEM_CFG1);
++ bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
++ bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
++ memsize = (bank0AC ? (1 << (bank0AC+1)) : 0)
++ + (bank1AC ? (1 << (bank1AC+1)) : 0);
++ memsize <<= 20;
++ add_memory_region(0, memsize, BOOT_MEM_RAM);
++
++ devid = ar231x_read_reg(AR531X_REV);
++ devid >>= AR531X_REV_WMAC_MIN_S;
++ devid &= AR531X_REV_CHIP;
++ ar231x_board.devid = (u16) devid;
++ ar231x_gpiodev = &ar5312_gpiodev;
++}
++
++void __init
++ar5312_plat_setup(void)
++{
++ if (!is_5312())
++ return;
++
++ /* Clear any lingering AHB errors */
++ ar231x_read_reg(AR531X_PROCADDR);
++ ar231x_read_reg(AR531X_DMAADDR);
++ ar231x_write_reg(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
++
++ _machine_restart = ar5312_restart;
++ ar231x_serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency());
++}
++
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/ar231x/ar5312.h linux-2.6.39-rc7/arch/mips/ar231x/ar5312.h
+--- linux-2.6.39-rc7.orig/arch/mips/ar231x/ar5312.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/ar231x/ar5312.h 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,38 @@
++#ifndef __AR5312_H
++#define __AR5312_H
++
++#ifdef CONFIG_ATHEROS_AR5312
++
++extern void ar5312_irq_init(void);
++extern int ar5312_init_devices(void);
++extern void ar5312_prom_init(void);
++extern void ar5312_plat_setup(void);
++extern void ar5312_time_init(void);
++extern void ar5312_time_init(void);
++
++#else
++
++static inline void ar5312_irq_init(void)
++{
++}
++
++static inline int ar5312_init_devices(void)
++{
++ return 0;
++}
++
++static inline void ar5312_prom_init(void)
++{
++}
++
++static inline void ar5312_plat_setup(void)
++{
++}
++
++static inline void ar5312_time_init(void)
++{
++}
++
++#endif
++
++#endif
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/ar231x/board.c linux-2.6.39-rc7/arch/mips/ar231x/board.c
+--- linux-2.6.39-rc7.orig/arch/mips/ar231x/board.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/ar231x/board.c 2011-05-15 22:16:11.000000000 +0200
+@@ -0,0 +1,261 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++ */
++
++#include <generated/autoconf.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/string.h>
++#include <linux/platform_device.h>
++#include <linux/kernel.h>
++#include <linux/random.h>
++#include <linux/etherdevice.h>
++#include <asm/irq_cpu.h>
++#include <asm/reboot.h>
++#include <asm/io.h>
++
++#include <ar231x_platform.h>
++#include "devices.h"
++#include "ar5312.h"
++#include "ar2315.h"
++
++void (*ar231x_irq_dispatch)(void);
++
++static inline bool
++check_radio_magic(u8 *addr)
++{
++ addr += 0x7a; /* offset for flash magic */
++ if ((addr[0] == 0x5a) && (addr[1] == 0xa5)) {
++ return 1;
++ }
++ return 0;
++}
++
++static inline bool
++check_board_data(u8 *flash_limit, u8 *addr, bool broken)
++{
++ /* config magic found */
++ if (*((u32 *)addr) == AR531X_BD_MAGIC)
++ return 1;
++
++ if (!broken)
++ return 0;
++
++ if (check_radio_magic(addr + 0xf8))
++ ar231x_board.radio = addr + 0xf8;
++ if ((addr < flash_limit + 0x10000) &&
++ check_radio_magic(addr + 0x10000))
++ ar231x_board.radio = addr + 0x10000;
++
++ if (ar231x_board.radio) {
++ /* broken board data detected, use radio data to find the offset,
++ * user will fix this */
++ return 1;
++ }
++ return 0;
++}
++
++static u8 *
++find_board_config(u8 *flash_limit, bool broken)
++{
++ u8 *addr;
++ int found = 0;
++
++ for (addr = flash_limit - 0x1000;
++ addr >= flash_limit - 0x30000;
++ addr -= 0x1000) {
++
++ if (check_board_data(flash_limit, addr, broken)) {
++ found = 1;
++ break;
++ }
++ }
++
++ if (!found)
++ addr = NULL;
++
++ return addr;
++}
++
++static u8 *
++find_radio_config(u8 *flash_limit, u8 *board_config)
++{
++ int found;
++ u8 *radio_config;
++
++ /*
++ * Now find the start of Radio Configuration data, using heuristics:
++ * Search forward from Board Configuration data by 0x1000 bytes
++ * at a time until we find non-0xffffffff.
++ */
++ found = 0;
++ for (radio_config = board_config + 0x1000;
++ (radio_config < flash_limit);
++ radio_config += 0x1000) {
++ if ((*(u32 *)radio_config != 0xffffffff) &&
++ check_radio_magic(radio_config)) {
++ found = 1;
++ break;
++ }
++ }
++
++ /* AR2316 relocates radio config to new location */
++ if (!found) {
++ for (radio_config = board_config + 0xf8;
++ (radio_config < flash_limit - 0x1000 + 0xf8);
++ radio_config += 0x1000) {
++ if ((*(u32 *)radio_config != 0xffffffff) &&
++ check_radio_magic(radio_config)) {
++ found = 1;
++ break;
++ }
++ }
++ }
++
++ if (!found) {
++ printk("Could not find Radio Configuration data\n");
++ radio_config = 0;
++ }
++
++ return (u8 *) radio_config;
++}
++
++int __init
++ar231x_find_config(u8 *flash_limit)
++{
++ struct ar231x_boarddata *config;
++ unsigned int rcfg_size;
++ int broken_boarddata = 0, i, tmp;
++ u8 *bcfg, *rcfg;
++ u8 *board_data;
++ u8 *radio_data;
++ u32 offset;
++
++ ar231x_board.config = NULL;
++ ar231x_board.radio = NULL;
++ /* Copy the board and radio data to RAM, because accessing the mapped
++ * memory of the flash directly after booting is not safe */
++
++ /* Try to find valid board and radio data */
++ bcfg = find_board_config(flash_limit, false);
++
++ /* If that fails, try to at least find valid radio data */
++ if (!bcfg) {
++ bcfg = find_board_config(flash_limit, true);
++ broken_boarddata = 1;
++ }
++
++ if (!bcfg) {
++ printk(KERN_WARNING "WARNING: No board configuration data found!\n");
++ return -ENODEV;
++ }
++
++ board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
++ ar231x_board.config = (struct ar231x_boarddata *) board_data;
++ memcpy(board_data, bcfg, 0x100);
++ if (broken_boarddata) {
++ printk(KERN_WARNING "WARNING: broken board data detected\n");
++ config = ar231x_board.config;
++ if (!memcmp(config->enet0_mac, "\x00\x00\x00\x00\x00\x00", 6)) {
++ printk(KERN_INFO "Fixing up empty mac addresses\n");
++ config->resetConfigGpio = 0xffff;
++ config->sysLedGpio = 0xffff;
++ random_ether_addr(config->wlan0_mac);
++ config->wlan0_mac[0] &= ~0x06;
++ random_ether_addr(config->enet0_mac);
++ random_ether_addr(config->enet1_mac);
++ }
++ }
++
++
++ /* Radio config starts 0x100 bytes after board config, regardless
++ * of what the physical layout on the flash chip looks like */
++
++ if (ar231x_board.radio)
++ rcfg = (u8 *) ar231x_board.radio;
++ else
++ rcfg = find_radio_config(flash_limit, bcfg);
++
++ if (!rcfg)
++ return -ENODEV;
++
++ radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff);
++ ar231x_board.radio = radio_data;
++ offset = radio_data - board_data;
++ printk(KERN_INFO "Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, offset);
++ rcfg_size = BOARD_CONFIG_BUFSZ - offset;
++ memcpy(radio_data, rcfg, rcfg_size);
++
++ for (tmp = 0xff, i = 0; i < ETH_ALEN; i++)
++ tmp &= radio_data[i + 0x1d * 2];
++ if (tmp == 0xff) {
++ u16 *eep = (u16 *)radio_data, *bcfgs = (u16 *)bcfg;
++ printk(KERN_INFO "Radio MAC is blank; using board-data\n");
++ eep[0x1f] = bcfgs[0x30];
++ eep[0x1e] = bcfgs[0x34];
++ eep[0x1d] = bcfgs[0x32];
++ }
++
++ return 0;
++}
++
++static void
++ar231x_halt(void)
++{
++ local_irq_disable();
++ while (1);
++}
++
++void __init
++plat_mem_setup(void)
++{
++ _machine_halt = ar231x_halt;
++ pm_power_off = ar231x_halt;
++
++ ar5312_plat_setup();
++ ar2315_plat_setup();
++
++ /* Disable data watchpoints */
++ write_c0_watchlo0(0);
++}
++
++
++asmlinkage void
++plat_irq_dispatch(void)
++{
++ ar231x_irq_dispatch();
++}
++
++void __init
++plat_time_init(void)
++{
++ ar5312_time_init();
++ ar2315_time_init();
++}
++
++unsigned int __cpuinit
++get_c0_compare_int(void)
++{
++ return CP0_LEGACY_COMPARE_IRQ;
++}
++
++void __init
++arch_init_irq(void)
++{
++ clear_c0_status(ST0_IM);
++ mips_cpu_irq_init();
++
++ /* Initialize interrupt controllers */
++ ar5312_irq_init();
++ ar2315_irq_init();
++}
++
++
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/ar231x/devices.c linux-2.6.39-rc7/arch/mips/ar231x/devices.c
+--- linux-2.6.39-rc7.orig/arch/mips/ar231x/devices.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/ar231x/devices.c 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,175 @@
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/serial.h>
++#include <linux/serial_core.h>
++#include <linux/serial_8250.h>
++#include <linux/platform_device.h>
++#include <ar231x_platform.h>
++#include <ar231x.h>
++#include "devices.h"
++#include "ar5312.h"
++#include "ar2315.h"
++
++struct ar231x_board_config ar231x_board;
++int ar231x_devtype = DEV_TYPE_UNKNOWN;
++const struct ar231x_gpiodev *ar231x_gpiodev;
++EXPORT_SYMBOL(ar231x_gpiodev);
++
++static struct resource ar231x_eth0_res[] = {
++ {
++ .name = "eth0_membase",
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .name = "eth0_irq",
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++static struct resource ar231x_eth1_res[] = {
++ {
++ .name = "eth1_membase",
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .name = "eth1_irq",
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++static struct platform_device ar231x_eth[] = {
++ {
++ .id = 0,
++ .name = "ar231x-eth",
++ .resource = ar231x_eth0_res,
++ .num_resources = ARRAY_SIZE(ar231x_eth0_res)
++ },
++ {
++ .id = 1,
++ .name = "ar231x-eth",
++ .resource = ar231x_eth1_res,
++ .num_resources = ARRAY_SIZE(ar231x_eth1_res)
++ }
++};
++
++static struct resource ar231x_wmac0_res[] = {
++ {
++ .name = "wmac0_membase",
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .name = "wmac0_irq",
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++static struct resource ar231x_wmac1_res[] = {
++ {
++ .name = "wmac1_membase",
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .name = "wmac1_irq",
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++
++static struct platform_device ar231x_wmac[] = {
++ {
++ .id = 0,
++ .name = "ar231x-wmac",
++ .resource = ar231x_wmac0_res,
++ .num_resources = ARRAY_SIZE(ar231x_wmac0_res),
++ .dev.platform_data = &ar231x_board,
++ },
++ {
++ .id = 1,
++ .name = "ar231x-wmac",
++ .resource = ar231x_wmac1_res,
++ .num_resources = ARRAY_SIZE(ar231x_wmac1_res),
++ .dev.platform_data = &ar231x_board,
++ },
++};
++
++static const char *devtype_strings[] = {
++ [DEV_TYPE_AR5312] = "Atheros AR5312",
++ [DEV_TYPE_AR2312] = "Atheros AR2312",
++ [DEV_TYPE_AR2313] = "Atheros AR2313",
++ [DEV_TYPE_AR2315] = "Atheros AR2315",
++ [DEV_TYPE_AR2316] = "Atheros AR2316",
++ [DEV_TYPE_AR2317] = "Atheros AR2317",
++ [DEV_TYPE_UNKNOWN] = "Atheros (unknown)",
++};
++
++const char *get_system_type(void)
++{
++ if ((ar231x_devtype >= ARRAY_SIZE(devtype_strings)) ||
++ !devtype_strings[ar231x_devtype])
++ return devtype_strings[DEV_TYPE_UNKNOWN];
++ return devtype_strings[ar231x_devtype];
++}
++
++
++int __init
++ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata)
++{
++ struct resource *res;
++
++ ar231x_eth[nr].dev.platform_data = pdata;
++ res = &ar231x_eth[nr].resource[0];
++ res->start = base;
++ res->end = base + 0x2000 - 1;
++ res++;
++ res->start = irq;
++ res->end = irq;
++ return platform_device_register(&ar231x_eth[nr]);
++}
++
++void __init
++ar231x_serial_setup(u32 mapbase, unsigned int uartclk)
++{
++ struct uart_port s;
++
++ memset(&s, 0, sizeof(s));
++
++ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
++ s.iotype = UPIO_MEM;
++ s.irq = AR531X_MISC_IRQ_UART0;
++ s.regshift = 2;
++ s.mapbase = mapbase;
++ s.uartclk = uartclk;
++ s.membase = (void __iomem *)s.mapbase;
++
++ early_serial_setup(&s);
++}
++
++int __init
++ar231x_add_wmac(int nr, u32 base, int irq)
++{
++ struct resource *res;
++
++ ar231x_wmac[nr].dev.platform_data = &ar231x_board;
++ res = &ar231x_wmac[nr].resource[0];
++ res->start = base;
++ res->end = base + 0x10000 - 1;
++ res++;
++ res->start = irq;
++ res->end = irq;
++ return platform_device_register(&ar231x_wmac[nr]);
++}
++
++static int __init ar231x_register_devices(void)
++{
++ static struct resource res = {
++ .start = 0xFFFFFFFF,
++ };
++
++ platform_device_register_simple("GPIODEV", 0, &res, 1);
++ ar5312_init_devices();
++ ar2315_init_devices();
++
++ return 0;
++}
++
++device_initcall(ar231x_register_devices);
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/ar231x/devices.h linux-2.6.39-rc7/arch/mips/ar231x/devices.h
+--- linux-2.6.39-rc7.orig/arch/mips/ar231x/devices.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/ar231x/devices.h 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,37 @@
++#ifndef __AR231X_DEVICES_H
++#define __AR231X_DEVICES_H
++
++enum {
++ /* handled by ar5312.c */
++ DEV_TYPE_AR2312,
++ DEV_TYPE_AR2313,
++ DEV_TYPE_AR5312,
++
++ /* handled by ar2315.c */
++ DEV_TYPE_AR2315,
++ DEV_TYPE_AR2316,
++ DEV_TYPE_AR2317,
++
++ DEV_TYPE_UNKNOWN
++};
++
++extern int ar231x_devtype;
++extern struct ar231x_board_config ar231x_board;
++extern asmlinkage void (*ar231x_irq_dispatch)(void);
++
++extern int ar231x_find_config(u8 *flash_limit);
++extern void ar231x_serial_setup(u32 mapbase, unsigned int uartclk);
++extern int ar231x_add_wmac(int nr, u32 base, int irq);
++extern int ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata);
++
++static inline bool is_2315(void)
++{
++ return (current_cpu_data.cputype == CPU_4KEC);
++}
++
++static inline bool is_5312(void)
++{
++ return !is_2315();
++}
++
++#endif
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/ar231x/early_printk.c linux-2.6.39-rc7/arch/mips/ar231x/early_printk.c
+--- linux-2.6.39-rc7.orig/arch/mips/ar231x/early_printk.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/ar231x/early_printk.c 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,44 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ */
++
++#include <linux/mm.h>
++#include <linux/io.h>
++#include <linux/serial_reg.h>
++#include <asm/addrspace.h>
++
++#include <asm/mach-ar231x/ar2315_regs.h>
++#include <asm/mach-ar231x/ar5312_regs.h>
++#include "devices.h"
++
++static inline void prom_uart_wr(void __iomem *base, unsigned reg,
++ unsigned char ch)
++{
++ __raw_writeb(ch, base + 4 * reg);
++}
++
++static inline unsigned char prom_uart_rr(void __iomem *base, unsigned reg)
++{
++ return __raw_readb(base + 4 * reg);
++}
++
++void prom_putchar(unsigned char ch)
++{
++ static void __iomem *base;
++
++ if (unlikely(base == NULL)) {
++ if (is_2315())
++ base = (void __iomem *)(KSEG1ADDR(AR2315_UART0));
++ else
++ base = (void __iomem *)(KSEG1ADDR(AR531X_UART0));
++ }
++
++ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0);
++ prom_uart_wr(base, UART_TX, ch);
++ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0);
++}
++
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/ar231x/pci.c linux-2.6.39-rc7/arch/mips/ar231x/pci.c
+--- linux-2.6.39-rc7.orig/arch/mips/ar231x/pci.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/ar231x/pci.c 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,230 @@
++/*
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/spinlock.h>
++#include <linux/delay.h>
++#include <linux/irq.h>
++#include <asm/bootinfo.h>
++#include <asm/paccess.h>
++#include <asm/irq_cpu.h>
++#include <asm/io.h>
++#include <ar231x_platform.h>
++#include <ar231x.h>
++#include <ar2315_regs.h>
++#include "devices.h"
++
++#define AR531X_MEM_BASE 0x80800000UL
++#define AR531X_MEM_SIZE 0x00ffffffUL
++#define AR531X_IO_SIZE 0x00007fffUL
++
++static unsigned long configspace;
++
++static int config_access(int devfn, int where, int size, u32 *ptr, bool write)
++{
++ unsigned long flags;
++ int func = PCI_FUNC(devfn);
++ int dev = PCI_SLOT(devfn);
++ u32 value = 0;
++ int err = 0;
++ u32 addr;
++
++ if (((dev != 0) && (dev != 3)) || (func > 2))
++ return PCIBIOS_DEVICE_NOT_FOUND;
++
++ /* Select Configuration access */
++ local_irq_save(flags);
++ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, 0, AR2315_PCIMISC_CFG_SEL);
++ mb();
++
++ addr = (u32) configspace + (1 << (13 + dev)) + (func << 8) + where;
++ if (size == 1)
++ addr ^= 0x3;
++ else if (size == 2)
++ addr ^= 0x2;
++
++ if (write) {
++ value = *ptr;
++ if (size == 1)
++ err = put_dbe(value, (u8 *) addr);
++ else if (size == 2)
++ err = put_dbe(value, (u16 *) addr);
++ else if (size == 4)
++ err = put_dbe(value, (u32 *) addr);
++ } else {
++ if (size == 1)
++ err = get_dbe(value, (u8 *) addr);
++ else if (size == 2)
++ err = get_dbe(value, (u16 *) addr);
++ else if (size == 4)
++ err = get_dbe(value, (u32 *) addr);
++ if (err)
++ *ptr = 0xffffffff;
++ else
++ *ptr = value;
++ }
++
++ /* Select Memory access */
++ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_CFG_SEL, 0);
++ local_irq_restore(flags);
++
++ return (err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL);
++}
++
++static int ar231x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value)
++{
++ return config_access(devfn, where, size, value, 0);
++}
++
++static int ar231x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
++{
++ return config_access(devfn, where, size, &value, 1);
++}
++
++struct pci_ops ar231x_pci_ops = {
++ .read = ar231x_pci_read,
++ .write = ar231x_pci_write,
++};
++
++static struct resource ar231x_mem_resource = {
++ .name = "AR531x PCI MEM",
++ .start = AR531X_MEM_BASE,
++ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE - 1 + 0x4000000,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource ar231x_io_resource = {
++ .name = "AR531x PCI I/O",
++ .start = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE,
++ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - 1,
++ .flags = IORESOURCE_IO,
++};
++
++struct pci_controller ar231x_pci_controller = {
++ .pci_ops = &ar231x_pci_ops,
++ .mem_resource = &ar231x_mem_resource,
++ .io_resource = &ar231x_io_resource,
++ .mem_offset = 0x00000000UL,
++ .io_offset = 0x00000000UL,
++};
++
++int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++ return AR2315_IRQ_LCBUS_PCI;
++}
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 5);
++ pci_write_config_word(dev, 0x40, 0);
++
++ /* Clear any pending Abort or external Interrupts
++ * and enable interrupt processing */
++ ar231x_mask_reg(AR2315_PCI_INTEN_REG, AR2315_PCI_INT_ENABLE, 0);
++ ar231x_write_reg(AR2315_PCI_INT_STATUS, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT));
++ ar231x_write_reg(AR2315_PCI_INT_MASK, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT));
++ ar231x_mask_reg(AR2315_PCI_INTEN_REG, 0, AR2315_PCI_INT_ENABLE);
++
++ return 0;
++}
++
++static void
++ar2315_pci_fixup(struct pci_dev *dev)
++{
++ unsigned int devfn = dev->devfn;
++
++ if (dev->bus->number != 0)
++ return;
++
++ /* Only fix up the PCI host settings */
++ if ((PCI_SLOT(devfn) != 3) || (PCI_FUNC(devfn) != 0))
++ return;
++
++ /* Fix up MBARs */
++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, HOST_PCI_MBAR0);
++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, HOST_PCI_MBAR1);
++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_2, HOST_PCI_MBAR2);
++ pci_write_config_dword(dev, PCI_COMMAND,
++ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL |
++ PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR |
++ PCI_COMMAND_FAST_BACK);
++}
++DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, ar2315_pci_fixup);
++
++static int __init
++ar2315_pci_init(void)
++{
++ u32 reg;
++
++ if (ar231x_devtype != DEV_TYPE_AR2315)
++ return -ENODEV;
++
++ configspace = (unsigned long) ioremap_nocache(0x80000000, 1*1024*1024); /* Remap PCI config space */
++ ar231x_pci_controller.io_map_base =
++ (unsigned long) ioremap_nocache(AR531X_MEM_BASE + AR531X_MEM_SIZE, AR531X_IO_SIZE);
++ set_io_port_base(ar231x_pci_controller.io_map_base); /* PCI I/O space */
++
++ reg = ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA);
++ msleep(10);
++
++ reg &= ~AR2315_RESET_PCIDMA;
++ ar231x_write_reg(AR2315_RESET, reg);
++ msleep(10);
++
++ ar231x_mask_reg(AR2315_ENDIAN_CTL, 0,
++ AR2315_CONFIG_PCIAHB | AR2315_CONFIG_PCIAHB_BRIDGE);
++
++ ar231x_write_reg(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM |
++ (AR2315_PCICLK_IN_FREQ_DIV_6 << AR2315_PCICLK_DIV_S));
++ ar231x_mask_reg(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI);
++ ar231x_mask_reg(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK | AR2315_IF_MASK,
++ AR2315_IF_PCI | AR2315_IF_PCI_HOST | AR2315_IF_PCI_INTR |
++ (AR2315_IF_PCI_CLK_OUTPUT_CLK << AR2315_IF_PCI_CLK_SHIFT));
++
++ /* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */
++ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE,
++ AR2315_PCIRST_LOW);
++ msleep(100);
++
++ /* Bring the PCI out of reset */
++ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE,
++ AR2315_PCIRST_HIGH | AR2315_PCICACHE_DIS | 0x8);
++
++ ar231x_write_reg(AR2315_PCI_UNCACHE_CFG,
++ 0x1E | /* 1GB uncached */
++ (1 << 5) | /* Enable uncached */
++ (0x2 << 30) /* Base: 0x80000000 */
++ );
++ ar231x_read_reg(AR2315_PCI_UNCACHE_CFG);
++
++ msleep(500);
++
++ /* dirty hack - anyone with a datasheet that knows the memory map ? */
++ ioport_resource.start = 0x10000000;
++ ioport_resource.end = 0xffffffff;
++ iomem_resource.start = 0x10000000;
++ iomem_resource.end = 0xffffffff;
++
++ register_pci_controller(&ar231x_pci_controller);
++
++ return 0;
++}
++
++arch_initcall(ar2315_pci_init);
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/ar231x/prom.c linux-2.6.39-rc7/arch/mips/ar231x/prom.c
+--- linux-2.6.39-rc7.orig/arch/mips/ar231x/prom.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/ar231x/prom.c 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,37 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright MontaVista Software Inc
++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
++ */
++
++/*
++ * Prom setup file for ar531x
++ */
++
++#include <linux/init.h>
++#include <generated/autoconf.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/bootmem.h>
++
++#include <asm/bootinfo.h>
++#include <asm/addrspace.h>
++#include "ar5312.h"
++#include "ar2315.h"
++
++void __init prom_init(void)
++{
++ ar5312_prom_init();
++ ar2315_prom_init();
++}
++
++void __init prom_free_prom_memory(void)
++{
++}
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/ar231x/reset.c linux-2.6.39-rc7/arch/mips/ar231x/reset.c
+--- linux-2.6.39-rc7.orig/arch/mips/ar231x/reset.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/ar231x/reset.c 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,161 @@
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/timer.h>
++#include <linux/interrupt.h>
++#include <linux/kobject.h>
++#include <linux/workqueue.h>
++#include <linux/skbuff.h>
++#include <linux/netlink.h>
++#include <net/sock.h>
++#include <asm/uaccess.h>
++#include <ar231x_platform.h>
++#include <ar231x.h>
++#include <gpio.h>
++#include "devices.h"
++
++#define AR531X_RESET_GPIO_IRQ (AR531X_GPIO_IRQ(ar231x_board.config->resetConfigGpio))
++
++struct event_t {
++ struct work_struct wq;
++ int set;
++ unsigned long jiffies;
++};
++
++static struct timer_list rst_button_timer;
++static unsigned long seen;
++
++struct sock *uevent_sock = NULL;
++EXPORT_SYMBOL_GPL(uevent_sock);
++extern u64 uevent_next_seqnum(void);
++
++static int no_release_workaround = 1;
++module_param(no_release_workaround, int, 0);
++
++static inline void
++add_msg(struct sk_buff *skb, char *msg)
++{
++ char *scratch;
++ scratch = skb_put(skb, strlen(msg) + 1);
++ sprintf(scratch, msg);
++}
++
++static void
++hotplug_button(struct work_struct *wq)
++{
++ struct sk_buff *skb;
++ struct event_t *event;
++ size_t len;
++ char *scratch, *s;
++ char buf[128];
++
++ event = container_of(wq, struct event_t, wq);
++ if (!uevent_sock)
++ goto done;
++
++ /* allocate message with the maximum possible size */
++ s = event->set ? "pressed" : "released";
++ len = strlen(s) + 2;
++ skb = alloc_skb(NLMSG_GOODSIZE, GFP_KERNEL);
++ if (!skb)
++ goto done;
++
++ /* add header */
++ scratch = skb_put(skb, len);
++ sprintf(scratch, "%s@",s);
++
++ /* copy keys to our continuous event payload buffer */
++ add_msg(skb, "HOME=/");
++ add_msg(skb, "PATH=/sbin:/bin:/usr/sbin:/usr/bin");
++ add_msg(skb, "SUBSYSTEM=button");
++ add_msg(skb, "BUTTON=reset");
++ add_msg(skb, (event->set ? "ACTION=pressed" : "ACTION=released"));
++ sprintf(buf, "SEEN=%ld", (event->jiffies - seen)/HZ);
++ add_msg(skb, buf);
++ snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum());
++ add_msg(skb, buf);
++
++ NETLINK_CB(skb).dst_group = 1;
++ netlink_broadcast(uevent_sock, skb, 0, 1, GFP_KERNEL);
++
++done:
++ kfree(event);
++}
++
++static void
++reset_button_poll(unsigned long unused)
++{
++ struct event_t *event;
++ int gpio = ~0;
++
++ if(!no_release_workaround)
++ return;
++
++ gpio = ar231x_gpiodev->get();
++ gpio &= (1 << (AR531X_RESET_GPIO_IRQ - AR531X_GPIO_IRQ_BASE));
++ if(gpio) {
++ rst_button_timer.expires = jiffies + (HZ / 4);
++ add_timer(&rst_button_timer);
++ return;
++ }
++
++ event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
++ if (!event)
++ return;
++
++ event->set = 0;
++ event->jiffies = jiffies;
++ INIT_WORK(&event->wq, hotplug_button);
++ schedule_work(&event->wq);
++}
++
++static irqreturn_t
++button_handler(int irq, void *dev_id)
++{
++ static int pressed = 0;
++ struct event_t *event;
++ u32 gpio = ~0;
++
++ event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
++ if (!event)
++ return IRQ_NONE;
++
++ pressed = !pressed;
++
++ gpio = ar231x_gpiodev->get() & (1 << (irq - AR531X_GPIO_IRQ_BASE));
++
++ event->set = gpio;
++ if(!event->set)
++ no_release_workaround = 0;
++
++ event->jiffies = jiffies;
++
++ INIT_WORK(&event->wq, hotplug_button);
++ schedule_work(&event->wq);
++
++ seen = jiffies;
++ if(event->set && no_release_workaround)
++ mod_timer(&rst_button_timer, jiffies + (HZ / 4));
++
++ return IRQ_HANDLED;
++}
++
++
++static int __init
++ar231x_init_reset(void)
++{
++ seen = jiffies;
++
++ if (ar231x_board.config->resetConfigGpio == 0xffff)
++ return -ENODEV;
++
++ init_timer(&rst_button_timer);
++ rst_button_timer.function = reset_button_poll;
++ rst_button_timer.expires = jiffies + HZ / 50;
++ add_timer(&rst_button_timer);
++
++ request_irq(AR531X_RESET_GPIO_IRQ, &button_handler, IRQF_SAMPLE_RANDOM, "ar231x_reset", NULL);
++
++ return 0;
++}
++
++module_init(ar231x_init_reset);
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/ar2315_regs.h linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/ar2315_regs.h
+--- linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/ar2315_regs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/ar2315_regs.h 2011-05-15 21:44:12.000000000 +0200
+@@ -0,0 +1,580 @@
++/*
++ * Register definitions for AR2315+
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2008 Felix Fietkau <nbd@openwrt.org>
++ */
++
++#ifndef __AR2315_REG_H
++#define __AR2315_REG_H
++
++/*
++ * IRQs
++ */
++#define AR2315_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
++#define AR2315_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
++#define AR2315_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
++#define AR2315_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
++#define AR2315_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
++
++/*
++ * Address map
++ */
++#define AR2315_SPI_READ 0x08000000 /* SPI FLASH */
++#define AR2315_WLAN0 0x10000000 /* Wireless MMR */
++#define AR2315_PCI 0x10100000 /* PCI MMR */
++#define AR2315_SDRAMCTL 0x10300000 /* SDRAM MMR */
++#define AR2315_LOCAL 0x10400000 /* LOCAL BUS MMR */
++#define AR2315_ENET0 0x10500000 /* ETHERNET MMR */
++#define AR2315_DSLBASE 0x11000000 /* RESET CONTROL MMR */
++#define AR2315_UART0 0x11100003 /* UART MMR */
++#define AR2315_SPI 0x11300000 /* SPI FLASH MMR */
++#define AR2315_PCIEXT 0x80000000 /* pci external */
++
++/*
++ * Reset Register
++ */
++#define AR2315_COLD_RESET (AR2315_DSLBASE + 0x0000)
++
++#define AR2315_RESET_COLD_AHB 0x00000001
++#define AR2315_RESET_COLD_APB 0x00000002
++#define AR2315_RESET_COLD_CPU 0x00000004
++#define AR2315_RESET_COLD_CPUWARM 0x00000008
++#define AR2315_RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */
++#define AR2317_RESET_SYSTEM 0x00000010
++
++
++#define AR2315_RESET (AR2315_DSLBASE + 0x0004)
++
++#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */
++#define AR2315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */
++#define AR2315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */
++#define AR2315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */
++#define AR2315_RESET_MEMCTL 0x00000010 /* warm reset memory controller */
++#define AR2315_RESET_LOCAL 0x00000020 /* warm reset local bus */
++#define AR2315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */
++#define AR2315_RESET_SPI 0x00000080 /* warm reset SPI interface */
++#define AR2315_RESET_UART0 0x00000100 /* warm reset UART0 */
++#define AR2315_RESET_IR_RSVD 0x00000200 /* warm reset IR interface */
++#define AR2315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */
++#define AR2315_RESET_ENET0 0x00000800 /* cold reset ENET0 mac */
++
++/*
++ * AHB master arbitration control
++ */
++#define AR2315_AHB_ARB_CTL (AR2315_DSLBASE + 0x0008)
++
++#define AR2315_ARB_CPU 0x00000001 /* CPU, default */
++#define AR2315_ARB_WLAN 0x00000002 /* WLAN */
++#define AR2315_ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
++#define AR2315_ARB_LOCAL 0x00000008 /* LOCAL */
++#define AR2315_ARB_PCI 0x00000010 /* PCI */
++#define AR2315_ARB_ETHERNET 0x00000020 /* Ethernet */
++#define AR2315_ARB_RETRY 0x00000100 /* retry policy, debug only */
++
++/*
++ * Config Register
++ */
++#define AR2315_ENDIAN_CTL (AR2315_DSLBASE + 0x000c)
++
++#define AR2315_CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */
++#define AR2315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */
++#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */
++#define AR2315_CONFIG_PCI 0x00000008 /* PCI byteswap */
++#define AR2315_CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */
++#define AR2315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */
++#define AR2315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */
++
++#define AR2315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */
++#define AR2315_CONFIG_CPU 0x00000400 /* CPU big endian */
++#define AR2315_CONFIG_PCIAHB 0x00000800
++#define AR2315_CONFIG_PCIAHB_BRIDGE 0x00001000
++#define AR2315_CONFIG_SPI 0x00008000 /* SPI byteswap */
++#define AR2315_CONFIG_CPU_DRAM 0x00010000
++#define AR2315_CONFIG_CPU_PCI 0x00020000
++#define AR2315_CONFIG_CPU_MMR 0x00040000
++#define AR2315_CONFIG_BIG 0x00000400
++
++
++/*
++ * NMI control
++ */
++#define AR2315_NMI_CTL (AR2315_DSLBASE + 0x0010)
++
++#define AR2315_NMI_EN 1
++
++/*
++ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
++ */
++#define AR2315_SREV (AR2315_DSLBASE + 0x0014)
++
++#define AR2315_REV_MAJ 0x00f0
++#define AR2315_REV_MAJ_S 4
++#define AR2315_REV_MIN 0x000f
++#define AR2315_REV_MIN_S 0
++#define AR2315_REV_CHIP (AR2315_REV_MAJ|AR2315_REV_MIN)
++
++/*
++ * Interface Enable
++ */
++#define AR2315_IF_CTL (AR2315_DSLBASE + 0x0018)
++
++#define AR2315_IF_MASK 0x00000007
++#define AR2315_IF_DISABLED 0
++#define AR2315_IF_PCI 1
++#define AR2315_IF_TS_LOCAL 2
++#define AR2315_IF_ALL 3 /* only for emulation with separate pins */
++#define AR2315_IF_LOCAL_HOST 0x00000008
++#define AR2315_IF_PCI_HOST 0x00000010
++#define AR2315_IF_PCI_INTR 0x00000020
++#define AR2315_IF_PCI_CLK_MASK 0x00030000
++#define AR2315_IF_PCI_CLK_INPUT 0
++#define AR2315_IF_PCI_CLK_OUTPUT_LOW 1
++#define AR2315_IF_PCI_CLK_OUTPUT_CLK 2
++#define AR2315_IF_PCI_CLK_OUTPUT_HIGH 3
++#define AR2315_IF_PCI_CLK_SHIFT 16
++
++/*
++ * APB Interrupt control
++ */
++
++#define AR2315_ISR (AR2315_DSLBASE + 0x0020)
++#define AR2315_IMR (AR2315_DSLBASE + 0x0024)
++#define AR2315_GISR (AR2315_DSLBASE + 0x0028)
++
++#define AR2315_ISR_UART0 0x0001 /* high speed UART */
++#define AR2315_ISR_I2C_RSVD 0x0002 /* I2C bus */
++#define AR2315_ISR_SPI 0x0004 /* SPI bus */
++#define AR2315_ISR_AHB 0x0008 /* AHB error */
++#define AR2315_ISR_APB 0x0010 /* APB error */
++#define AR2315_ISR_TIMER 0x0020 /* timer */
++#define AR2315_ISR_GPIO 0x0040 /* GPIO */
++#define AR2315_ISR_WD 0x0080 /* watchdog */
++#define AR2315_ISR_IR_RSVD 0x0100 /* IR */
++
++#define AR2315_GISR_MISC 0x0001
++#define AR2315_GISR_WLAN0 0x0002
++#define AR2315_GISR_MPEGTS_RSVD 0x0004
++#define AR2315_GISR_LOCALPCI 0x0008
++#define AR2315_GISR_WMACPOLL 0x0010
++#define AR2315_GISR_TIMER 0x0020
++#define AR2315_GISR_ETHERNET 0x0040
++
++/*
++ * Interrupt routing from IO to the processor IP bits
++ * Define our inter mask and level
++ */
++#define AR2315_INTR_MISCIO SR_IBIT3
++#define AR2315_INTR_WLAN0 SR_IBIT4
++#define AR2315_INTR_ENET0 SR_IBIT5
++#define AR2315_INTR_LOCALPCI SR_IBIT6
++#define AR2315_INTR_WMACPOLL SR_IBIT7
++#define AR2315_INTR_COMPARE SR_IBIT8
++
++/*
++ * Timers
++ */
++#define AR2315_TIMER (AR2315_DSLBASE + 0x0030)
++#define AR2315_RELOAD (AR2315_DSLBASE + 0x0034)
++#define AR2315_WD (AR2315_DSLBASE + 0x0038)
++#define AR2315_WDC (AR2315_DSLBASE + 0x003c)
++
++#define AR2315_WDC_IGNORE_EXPIRATION 0x00000000
++#define AR2315_WDC_NMI 0x00000001 /* NMI on watchdog */
++#define AR2315_WDC_RESET 0x00000002 /* reset on watchdog */
++
++/*
++ * CPU Performance Counters
++ */
++#define AR2315_PERFCNT0 (AR2315_DSLBASE + 0x0048)
++#define AR2315_PERFCNT1 (AR2315_DSLBASE + 0x004c)
++
++#define AR2315_PERF0_DATAHIT 0x0001 /* Count Data Cache Hits */
++#define AR2315_PERF0_DATAMISS 0x0002 /* Count Data Cache Misses */
++#define AR2315_PERF0_INSTHIT 0x0004 /* Count Instruction Cache Hits */
++#define AR2315_PERF0_INSTMISS 0x0008 /* Count Instruction Cache Misses */
++#define AR2315_PERF0_ACTIVE 0x0010 /* Count Active Processor Cycles */
++#define AR2315_PERF0_WBHIT 0x0020 /* Count CPU Write Buffer Hits */
++#define AR2315_PERF0_WBMISS 0x0040 /* Count CPU Write Buffer Misses */
++
++#define AR2315_PERF1_EB_ARDY 0x0001 /* Count EB_ARdy signal */
++#define AR2315_PERF1_EB_AVALID 0x0002 /* Count EB_AValid signal */
++#define AR2315_PERF1_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */
++#define AR2315_PERF1_EB_RDVAL 0x0008 /* Count EB_RdVal signal */
++#define AR2315_PERF1_VRADDR 0x0010 /* Count valid read address cycles */
++#define AR2315_PERF1_VWADDR 0x0020 /* Count valid write address cycles */
++#define AR2315_PERF1_VWDATA 0x0040 /* Count valid write data cycles */
++
++/*
++ * AHB Error Reporting.
++ */
++#define AR2315_AHB_ERR0 (AR2315_DSLBASE + 0x0050) /* error */
++#define AR2315_AHB_ERR1 (AR2315_DSLBASE + 0x0054) /* haddr */
++#define AR2315_AHB_ERR2 (AR2315_DSLBASE + 0x0058) /* hwdata */
++#define AR2315_AHB_ERR3 (AR2315_DSLBASE + 0x005c) /* hrdata */
++#define AR2315_AHB_ERR4 (AR2315_DSLBASE + 0x0060) /* status */
++
++#define AHB_ERROR_DET 1 /* AHB Error has been detected, */
++ /* write 1 to clear all bits in ERR0 */
++#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */
++#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */
++
++#define AR2315_PROCERR_HMAST 0x0000000f
++#define AR2315_PROCERR_HMAST_DFLT 0
++#define AR2315_PROCERR_HMAST_WMAC 1
++#define AR2315_PROCERR_HMAST_ENET 2
++#define AR2315_PROCERR_HMAST_PCIENDPT 3
++#define AR2315_PROCERR_HMAST_LOCAL 4
++#define AR2315_PROCERR_HMAST_CPU 5
++#define AR2315_PROCERR_HMAST_PCITGT 6
++
++#define AR2315_PROCERR_HMAST_S 0
++#define AR2315_PROCERR_HWRITE 0x00000010
++#define AR2315_PROCERR_HSIZE 0x00000060
++#define AR2315_PROCERR_HSIZE_S 5
++#define AR2315_PROCERR_HTRANS 0x00000180
++#define AR2315_PROCERR_HTRANS_S 7
++#define AR2315_PROCERR_HBURST 0x00000e00
++#define AR2315_PROCERR_HBURST_S 9
++
++/*
++ * Clock Control
++ */
++#define AR2315_PLLC_CTL (AR2315_DSLBASE + 0x0064)
++#define AR2315_PLLV_CTL (AR2315_DSLBASE + 0x0068)
++#define AR2315_CPUCLK (AR2315_DSLBASE + 0x006c)
++#define AR2315_AMBACLK (AR2315_DSLBASE + 0x0070)
++#define AR2315_SYNCCLK (AR2315_DSLBASE + 0x0074)
++#define AR2315_DSL_SLEEP_CTL (AR2315_DSLBASE + 0x0080)
++#define AR2315_DSL_SLEEP_DUR (AR2315_DSLBASE + 0x0084)
++
++/* PLLc Control fields */
++#define PLLC_REF_DIV_M 0x00000003
++#define PLLC_REF_DIV_S 0
++#define PLLC_FDBACK_DIV_M 0x0000007C
++#define PLLC_FDBACK_DIV_S 2
++#define PLLC_ADD_FDBACK_DIV_M 0x00000080
++#define PLLC_ADD_FDBACK_DIV_S 7
++#define PLLC_CLKC_DIV_M 0x0001c000
++#define PLLC_CLKC_DIV_S 14
++#define PLLC_CLKM_DIV_M 0x00700000
++#define PLLC_CLKM_DIV_S 20
++
++/* CPU CLK Control fields */
++#define CPUCLK_CLK_SEL_M 0x00000003
++#define CPUCLK_CLK_SEL_S 0
++#define CPUCLK_CLK_DIV_M 0x0000000c
++#define CPUCLK_CLK_DIV_S 2
++
++/* AMBA CLK Control fields */
++#define AMBACLK_CLK_SEL_M 0x00000003
++#define AMBACLK_CLK_SEL_S 0
++#define AMBACLK_CLK_DIV_M 0x0000000c
++#define AMBACLK_CLK_DIV_S 2
++
++/*
++ * GPIO
++ */
++#define AR2315_GPIO_DI (AR2315_DSLBASE + 0x0088)
++#define AR2315_GPIO_DO (AR2315_DSLBASE + 0x0090)
++#define AR2315_GPIO_CR (AR2315_DSLBASE + 0x0098)
++#define AR2315_GPIO_INT (AR2315_DSLBASE + 0x00a0)
++
++#define AR2315_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
++#define AR2315_GPIO_CR_O(x) (1 << (x)) /* output */
++#define AR2315_GPIO_CR_I(x) (0) /* input */
++
++#define AR2315_GPIO_INT_S(x) (x) /* interrupt enable */
++#define AR2315_GPIO_INT_M (0x3F) /* mask for int */
++#define AR2315_GPIO_INT_LVL(x) ((x) << 6) /* interrupt level */
++#define AR2315_GPIO_INT_LVL_M ((0x3) << 6) /* mask for int level */
++
++#define AR2315_GPIO_INT_MAX_Y 1 /* Maximum value of Y for AR5313_GPIO_INT_* macros */
++#define AR2315_GPIO_INT_LVL_OFF 0 /* Triggerring off */
++#define AR2315_GPIO_INT_LVL_LOW 1 /* Low Level Triggered */
++#define AR2315_GPIO_INT_LVL_HIGH 2 /* High Level Triggered */
++#define AR2315_GPIO_INT_LVL_EDGE 3 /* Edge Triggered */
++
++#define AR2315_RESET_GPIO 5
++#define AR2315_NUM_GPIO 22
++
++/*
++ * PCI Clock Control
++ */
++#define AR2315_PCICLK (AR2315_DSLBASE + 0x00a4)
++
++#define AR2315_PCICLK_INPUT_M 0x3
++#define AR2315_PCICLK_INPUT_S 0
++
++#define AR2315_PCICLK_PLLC_CLKM 0
++#define AR2315_PCICLK_PLLC_CLKM1 1
++#define AR2315_PCICLK_PLLC_CLKC 2
++#define AR2315_PCICLK_REF_CLK 3
++
++#define AR2315_PCICLK_DIV_M 0xc
++#define AR2315_PCICLK_DIV_S 2
++
++#define AR2315_PCICLK_IN_FREQ 0
++#define AR2315_PCICLK_IN_FREQ_DIV_6 1
++#define AR2315_PCICLK_IN_FREQ_DIV_8 2
++#define AR2315_PCICLK_IN_FREQ_DIV_10 3
++
++/*
++ * Observation Control Register
++ */
++#define AR2315_OCR (AR2315_DSLBASE + 0x00b0)
++#define OCR_GPIO0_IRIN 0x0040
++#define OCR_GPIO1_IROUT 0x0080
++#define OCR_GPIO3_RXCLR 0x0200
++
++/*
++ * General Clock Control
++ */
++
++#define AR2315_MISCCLK (AR2315_DSLBASE + 0x00b4)
++#define MISCCLK_PLLBYPASS_EN 0x00000001
++#define MISCCLK_PROCREFCLK 0x00000002
++
++/*
++ * SDRAM Controller
++ * - No read or write buffers are included.
++ */
++#define AR2315_MEM_CFG (AR2315_SDRAMCTL + 0x00)
++#define AR2315_MEM_CTRL (AR2315_SDRAMCTL + 0x0c)
++#define AR2315_MEM_REF (AR2315_SDRAMCTL + 0x10)
++
++#define SDRAM_DATA_WIDTH_M 0x00006000
++#define SDRAM_DATA_WIDTH_S 13
++
++#define SDRAM_COL_WIDTH_M 0x00001E00
++#define SDRAM_COL_WIDTH_S 9
++
++#define SDRAM_ROW_WIDTH_M 0x000001E0
++#define SDRAM_ROW_WIDTH_S 5
++
++#define SDRAM_BANKADDR_BITS_M 0x00000018
++#define SDRAM_BANKADDR_BITS_S 3
++
++/*
++ * SPI Flash Interface Registers
++ */
++
++#define AR2315_SPI_CTL (AR2315_SPI + 0x00)
++#define AR2315_SPI_OPCODE (AR2315_SPI + 0x04)
++#define AR2315_SPI_DATA (AR2315_SPI + 0x08)
++
++#define SPI_CTL_START 0x00000100
++#define SPI_CTL_BUSY 0x00010000
++#define SPI_CTL_TXCNT_MASK 0x0000000f
++#define SPI_CTL_RXCNT_MASK 0x000000f0
++#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
++#define SPI_CTL_SIZE_MASK 0x00060000
++
++#define SPI_CTL_CLK_SEL_MASK 0x03000000
++#define SPI_OPCODE_MASK 0x000000ff
++
++/*
++ * PCI Bus Interface Registers
++ */
++#define AR2315_PCI_1MS_REG (AR2315_PCI + 0x0008)
++#define AR2315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
++
++#define AR2315_PCI_MISC_CONFIG (AR2315_PCI + 0x000c)
++#define AR2315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */
++#define AR2315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */
++#define AR2315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */
++#define AR2315_PCIMISC_RST_MODE 0x00000030
++#define AR2315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */
++#define AR2315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */
++#define AR2315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */
++#define AR2315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */
++#define AR2315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */
++#define AR2315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */
++#define AR2315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */
++#define AR2315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */
++
++#define AR2315_PCI_OUT_TSTAMP (AR2315_PCI + 0x0010)
++
++#define AR2315_PCI_UNCACHE_CFG (AR2315_PCI + 0x0014)
++
++#define AR2315_PCI_IN_EN (AR2315_PCI + 0x0100)
++#define AR2315_PCI_IN_EN0 0x01 /* Enable chain 0 */
++#define AR2315_PCI_IN_EN1 0x02 /* Enable chain 1 */
++#define AR2315_PCI_IN_EN2 0x04 /* Enable chain 2 */
++#define AR2315_PCI_IN_EN3 0x08 /* Enable chain 3 */
++
++#define AR2315_PCI_IN_DIS (AR2315_PCI + 0x0104)
++#define AR2315_PCI_IN_DIS0 0x01 /* Disable chain 0 */
++#define AR2315_PCI_IN_DIS1 0x02 /* Disable chain 1 */
++#define AR2315_PCI_IN_DIS2 0x04 /* Disable chain 2 */
++#define AR2315_PCI_IN_DIS3 0x08 /* Disable chain 3 */
++
++#define AR2315_PCI_IN_PTR (AR2315_PCI + 0x0200)
++
++#define AR2315_PCI_OUT_EN (AR2315_PCI + 0x0400)
++#define AR2315_PCI_OUT_EN0 0x01 /* Enable chain 0 */
++
++#define AR2315_PCI_OUT_DIS (AR2315_PCI + 0x0404)
++#define AR2315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */
++
++#define AR2315_PCI_OUT_PTR (AR2315_PCI + 0x0408)
++
++#define AR2315_PCI_INT_STATUS (AR2315_PCI + 0x0500) /* write one to clr */
++#define AR2315_PCI_TXINT 0x00000001 /* Desc In Completed */
++#define AR2315_PCI_TXOK 0x00000002 /* Desc In OK */
++#define AR2315_PCI_TXERR 0x00000004 /* Desc In ERR */
++#define AR2315_PCI_TXEOL 0x00000008 /* Desc In End-of-List */
++#define AR2315_PCI_RXINT 0x00000010 /* Desc Out Completed */
++#define AR2315_PCI_RXOK 0x00000020 /* Desc Out OK */
++#define AR2315_PCI_RXERR 0x00000040 /* Desc Out ERR */
++#define AR2315_PCI_RXEOL 0x00000080 /* Desc Out EOL */
++#define AR2315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */
++#define AR2315_PCI_MASK 0x0000FFFF /* Desc Mask */
++#define AR2315_PCI_EXT_INT 0x02000000
++#define AR2315_PCI_ABORT_INT 0x04000000
++
++#define AR2315_PCI_INT_MASK (AR2315_PCI + 0x0504) /* same as INT_STATUS */
++
++#define AR2315_PCI_INTEN_REG (AR2315_PCI + 0x0508)
++#define AR2315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */
++#define AR2315_PCI_INT_ENABLE 0x01 /* enable pci interrupts */
++
++#define AR2315_PCI_HOST_IN_EN (AR2315_PCI + 0x0800)
++#define AR2315_PCI_HOST_IN_DIS (AR2315_PCI + 0x0804)
++#define AR2315_PCI_HOST_IN_PTR (AR2315_PCI + 0x0810)
++#define AR2315_PCI_HOST_OUT_EN (AR2315_PCI + 0x0900)
++#define AR2315_PCI_HOST_OUT_DIS (AR2315_PCI + 0x0904)
++#define AR2315_PCI_HOST_OUT_PTR (AR2315_PCI + 0x0908)
++
++
++/*
++ * Local Bus Interface Registers
++ */
++#define AR2315_LB_CONFIG (AR2315_LOCAL + 0x0000)
++#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */
++#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */
++#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */
++#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */
++#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */
++#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */
++#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */
++#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */
++#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */
++#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */
++#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */
++#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */
++#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */
++#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */
++#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */
++#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */
++#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */
++#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */
++#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */
++#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */
++#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */
++#define AR2315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */
++#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */
++#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */
++#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */
++
++#define AR2315_LB_CLKSEL (AR2315_LOCAL + 0x0004)
++#define AR2315_LBCLK_EXT 0x0001 /* use external clk for lb */
++
++#define AR2315_LB_1MS (AR2315_LOCAL + 0x0008)
++#define AR2315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
++
++#define AR2315_LB_MISCCFG (AR2315_LOCAL + 0x000C)
++#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */
++#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */
++#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */
++#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */
++#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */
++#define AR2315_LBM_TIMEOUT_MASK 0x00FFFF80
++#define AR2315_LBM_TIMEOUT_SHFT 7
++#define AR2315_LBM_PORTMUX 0x07000000
++
++
++#define AR2315_LB_RXTSOFF (AR2315_LOCAL + 0x0010)
++
++#define AR2315_LB_TX_CHAIN_EN (AR2315_LOCAL + 0x0100)
++#define AR2315_LB_TXEN_0 0x01
++#define AR2315_LB_TXEN_1 0x02
++#define AR2315_LB_TXEN_2 0x04
++#define AR2315_LB_TXEN_3 0x08
++
++#define AR2315_LB_TX_CHAIN_DIS (AR2315_LOCAL + 0x0104)
++#define AR2315_LB_TX_DESC_PTR (AR2315_LOCAL + 0x0200)
++
++#define AR2315_LB_RX_CHAIN_EN (AR2315_LOCAL + 0x0400)
++#define AR2315_LB_RXEN 0x01
++
++#define AR2315_LB_RX_CHAIN_DIS (AR2315_LOCAL + 0x0404)
++#define AR2315_LB_RX_DESC_PTR (AR2315_LOCAL + 0x0408)
++
++#define AR2315_LB_INT_STATUS (AR2315_LOCAL + 0x0500)
++#define AR2315_INT_TX_DESC 0x0001
++#define AR2315_INT_TX_OK 0x0002
++#define AR2315_INT_TX_ERR 0x0004
++#define AR2315_INT_TX_EOF 0x0008
++#define AR2315_INT_RX_DESC 0x0010
++#define AR2315_INT_RX_OK 0x0020
++#define AR2315_INT_RX_ERR 0x0040
++#define AR2315_INT_RX_EOF 0x0080
++#define AR2315_INT_TX_TRUNC 0x0100
++#define AR2315_INT_TX_STARVE 0x0200
++#define AR2315_INT_LB_TIMEOUT 0x0400
++#define AR2315_INT_LB_ERR 0x0800
++#define AR2315_INT_MBOX_WR 0x1000
++#define AR2315_INT_MBOX_RD 0x2000
++
++/* Bit definitions for INT MASK are the same as INT_STATUS */
++#define AR2315_LB_INT_MASK (AR2315_LOCAL + 0x0504)
++
++#define AR2315_LB_INT_EN (AR2315_LOCAL + 0x0508)
++#define AR2315_LB_MBOX (AR2315_LOCAL + 0x0600)
++
++/*
++ * IR Interface Registers
++ */
++#define AR2315_IR_PKTDATA (AR2315_IR + 0x0000)
++
++#define AR2315_IR_PKTLEN (AR2315_IR + 0x07fc) /* 0 - 63 */
++
++#define AR2315_IR_CONTROL (AR2315_IR + 0x0800)
++#define AR2315_IRCTL_TX 0x00000000 /* use as tranmitter */
++#define AR2315_IRCTL_RX 0x00000001 /* use as receiver */
++#define AR2315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */
++#define AR2315_IRCTL_SAMPLECLK_SHFT 1
++#define AR2315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */
++#define AR2315_IRCTL_OUTPUTCLK_SHFT 14
++
++#define AR2315_IR_STATUS (AR2315_IR + 0x0804)
++#define AR2315_IRSTS_RX 0x00000001 /* receive in progress */
++#define AR2315_IRSTS_TX 0x00000002 /* transmit in progress */
++
++#define AR2315_IR_CONFIG (AR2315_IR + 0x0808)
++#define AR2315_IRCFG_INVIN 0x00000001 /* invert input polarity */
++#define AR2315_IRCFG_INVOUT 0x00000002 /* invert output polarity */
++#define AR2315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */
++#define AR2315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */
++#define AR2315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */
++#define AR2315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */
++#define AR2315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */
++#define AR2315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */
++#define AR2315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */
++
++#define HOST_PCI_DEV_ID 3
++#define HOST_PCI_MBAR0 0x10000000
++#define HOST_PCI_MBAR1 0x20000000
++#define HOST_PCI_MBAR2 0x30000000
++
++#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
++#define PCI_DEVICE_MEM_SPACE 0x800000
++
++#endif /* __AR2315_REG_H */
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/ar2315_spiflash.h linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/ar2315_spiflash.h
+--- linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/ar2315_spiflash.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/ar2315_spiflash.h 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,116 @@
++/*
++ * SPI Flash Memory support header file.
++ *
++ * Copyright (c) 2005, Atheros Communications Inc.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++ *
++ * This code is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++#ifndef __AR2315_SPIFLASH_H
++#define __AR2315_SPIFLASH_H
++
++#define STM_PAGE_SIZE 256
++
++#define SFI_WRITE_BUFFER_SIZE 4
++#define SFI_FLASH_ADDR_MASK 0x00ffffff
++
++#define STM_8MBIT_SIGNATURE 0x13
++#define STM_M25P80_BYTE_COUNT 1048576
++#define STM_M25P80_SECTOR_COUNT 16
++#define STM_M25P80_SECTOR_SIZE 0x10000
++
++#define STM_16MBIT_SIGNATURE 0x14
++#define STM_M25P16_BYTE_COUNT 2097152
++#define STM_M25P16_SECTOR_COUNT 32
++#define STM_M25P16_SECTOR_SIZE 0x10000
++
++#define STM_32MBIT_SIGNATURE 0x15
++#define STM_M25P32_BYTE_COUNT 4194304
++#define STM_M25P32_SECTOR_COUNT 64
++#define STM_M25P32_SECTOR_SIZE 0x10000
++
++#define STM_64MBIT_SIGNATURE 0x16
++#define STM_M25P64_BYTE_COUNT 8388608
++#define STM_M25P64_SECTOR_COUNT 128
++#define STM_M25P64_SECTOR_SIZE 0x10000
++
++#define STM_128MBIT_SIGNATURE 0x17
++#define STM_M25P128_BYTE_COUNT 16777216
++#define STM_M25P128_SECTOR_COUNT 256
++#define STM_M25P128_SECTOR_SIZE 0x10000
++
++#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT
++#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
++#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE
++#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT
++#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
++#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE
++#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT
++#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
++#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE
++#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT
++#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
++#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE
++#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT
++#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
++#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE
++
++/*
++ * ST Microelectronics Opcodes for Serial Flash
++ */
++
++#define STM_OP_WR_ENABLE 0x06 /* Write Enable */
++#define STM_OP_WR_DISABLE 0x04 /* Write Disable */
++#define STM_OP_RD_STATUS 0x05 /* Read Status */
++#define STM_OP_WR_STATUS 0x01 /* Write Status */
++#define STM_OP_RD_DATA 0x03 /* Read Data */
++#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */
++#define STM_OP_PAGE_PGRM 0x02 /* Page Program */
++#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */
++#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */
++#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */
++#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */
++
++#define STM_STATUS_WIP 0x01 /* Write-In-Progress */
++#define STM_STATUS_WEL 0x02 /* Write Enable Latch */
++#define STM_STATUS_BP0 0x04 /* Block Protect 0 */
++#define STM_STATUS_BP1 0x08 /* Block Protect 1 */
++#define STM_STATUS_BP2 0x10 /* Block Protect 2 */
++#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */
++
++/*
++ * SPI Flash Interface Registers
++ */
++#define AR531XPLUS_SPI_READ 0x08000000
++#define AR531XPLUS_SPI_MMR 0x11300000
++#define AR531XPLUS_SPI_MMR_SIZE 12
++
++#define AR531XPLUS_SPI_CTL 0x00
++#define AR531XPLUS_SPI_OPCODE 0x04
++#define AR531XPLUS_SPI_DATA 0x08
++
++#define SPI_FLASH_READ AR531XPLUS_SPI_READ
++#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR
++#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE
++#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL
++#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE
++#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA
++
++#define SPI_CTL_START 0x00000100
++#define SPI_CTL_BUSY 0x00010000
++#define SPI_CTL_TXCNT_MASK 0x0000000f
++#define SPI_CTL_RXCNT_MASK 0x000000f0
++#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
++#define SPI_CTL_SIZE_MASK 0x00060000
++
++#define SPI_CTL_CLK_SEL_MASK 0x03000000
++#define SPI_OPCODE_MASK 0x000000ff
++
++#define SPI_STATUS_WIP STM_STATUS_WIP
++
++#endif
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/ar231x.h linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/ar231x.h
+--- linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/ar231x.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/ar231x.h 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,54 @@
++#ifndef __AR531X_H
++#define __AR531X_H
++
++#define AR531X_MISC_IRQ_BASE 0x20
++#define AR531X_GPIO_IRQ_BASE 0x30
++
++/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
++#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0
++#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
++
++/* Miscellaneous interrupts, which share IP6 */
++#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0
++#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1
++#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2
++#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3
++#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4
++#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5
++#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6
++#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7
++#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8
++#define AR531X_MISC_IRQ_SPI AR531X_MISC_IRQ_BASE+9
++#define AR531X_MISC_IRQ_COUNT 10
++
++/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
++#define AR531X_GPIO_IRQ_NONE AR531X_GPIO_IRQ_BASE+0
++#define AR531X_GPIO_IRQ(n) AR531X_GPIO_IRQ_BASE+n
++#define AR531X_GPIO_IRQ_COUNT 22
++
++static inline u32
++ar231x_read_reg(u32 reg)
++{
++ return __raw_readl((u32 *) KSEG1ADDR(reg));
++}
++
++static inline void
++ar231x_write_reg(u32 reg, u32 val)
++{
++ __raw_writel(val, (u32 *) KSEG1ADDR(reg));
++}
++
++static inline u32
++ar231x_mask_reg(u32 reg, u32 mask, u32 val)
++{
++ u32 ret;
++
++ ret = ar231x_read_reg(reg);
++ ret &= ~mask;
++ ret |= val;
++ ar231x_write_reg(reg, ret);
++
++ return ret;
++}
++
++#endif
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/ar231x_platform.h linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/ar231x_platform.h
+--- linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/ar231x_platform.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/ar231x_platform.h 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,83 @@
++#ifndef __AR531X_PLATFORM_H
++#define __AR531X_PLATFORM_H
++
++/*
++ * This is board-specific data that is stored in a "fixed" location in flash.
++ * It is shared across operating systems, so it should not be changed lightly.
++ * The main reason we need it is in order to extract the ethernet MAC
++ * address(es).
++ */
++struct ar231x_boarddata {
++ u32 magic; /* board data is valid */
++#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
++ u16 cksum; /* checksum (starting with BD_REV 2) */
++ u16 rev; /* revision of this struct */
++#define BD_REV 4
++ char boardName[64]; /* Name of board */
++ u16 major; /* Board major number */
++ u16 minor; /* Board minor number */
++ u32 flags; /* Board configuration */
++#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
++#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
++#define BD_UART1 0x00000004 /* UART1 is stuffed */
++#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
++#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
++#define BD_SYSLED 0x00000020 /* System LED stuffed */
++#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
++#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
++#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
++#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
++#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
++#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
++#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
++#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
++#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
++#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
++#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
++#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
++ u16 resetConfigGpio; /* Reset factory GPIO pin */
++ u16 sysLedGpio; /* System LED GPIO pin */
++
++ u32 cpuFreq; /* CPU core frequency in Hz */
++ u32 sysFreq; /* System frequency in Hz */
++ u32 cntFreq; /* Calculated C0_COUNT frequency */
++
++ u8 wlan0_mac[6];
++ u8 enet0_mac[6];
++ u8 enet1_mac[6];
++
++ u16 pciId; /* Pseudo PCIID for common code */
++ u16 memCap; /* cap bank1 in MB */
++
++ /* version 3 */
++ u8 wlan1_mac[6]; /* (ar5212) */
++};
++
++#define BOARD_CONFIG_BUFSZ 0x1000
++
++/*
++ * Platform device information for the Wireless MAC
++ */
++struct ar231x_board_config {
++ u16 devid;
++
++ /* board config data */
++ struct ar231x_boarddata *config;
++
++ /* radio calibration data */
++ const char *radio;
++};
++
++/*
++ * Platform device information for the Ethernet MAC
++ */
++struct ar231x_eth {
++ u32 reset_base;
++ u32 reset_mac;
++ u32 reset_phy;
++ u32 phy_base;
++ struct ar231x_board_config *config;
++ char *macaddr;
++};
++
++#endif /* __AR531X_PLATFORM_H */
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/ar5312_regs.h linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/ar5312_regs.h
+--- linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/ar5312_regs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/ar5312_regs.h 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,236 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
++ */
++
++#ifndef AR5312_H
++#define AR5312_H
++
++#include <asm/addrspace.h>
++
++/*
++ * IRQs
++ */
++
++#define AR5312_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
++#define AR5312_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
++#define AR5312_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
++#define AR5312_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
++#define AR5312_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
++
++
++/* Address Map */
++#define AR531X_WLAN0 0x18000000
++#define AR531X_WLAN1 0x18500000
++#define AR531X_ENET0 0x18100000
++#define AR531X_ENET1 0x18200000
++#define AR531X_SDRAMCTL 0x18300000
++#define AR531X_FLASHCTL 0x18400000
++#define AR531X_APBBASE 0x1c000000
++#define AR531X_FLASH 0x1e000000
++#define AR531X_UART0 0xbc000003 /* UART MMR */
++
++/*
++ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
++ * should be considered available. The AR5312 supports 2 enet MACS,
++ * even though many reference boards only actually use 1 of them
++ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
++ * The AR2312 supports 1 enet MAC.
++ */
++#define AR531X_NUM_ENET_MAC 2
++
++/*
++ * Need these defines to determine true number of ethernet MACs
++ */
++#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
++#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
++#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
++#define AR531X_RADIO_MASK_OFF 0xc8
++#define AR531X_RADIO0_MASK 0x0003
++#define AR531X_RADIO1_MASK 0x000c
++#define AR531X_RADIO1_S 2
++
++/*
++ * AR531X_NUM_WMAC defines the number of Wireless MACs that\
++ * should be considered available.
++ */
++#define AR531X_NUM_WMAC 2
++
++/* Reset/Timer Block Address Map */
++#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000)
++#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */
++#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
++#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */
++#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
++#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
++#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
++#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064)
++#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c)
++#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070)
++#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074)
++#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078)
++#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c)
++#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */
++#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */
++
++/* AR531X_WD_CTRL register bit field definitions */
++#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
++#define AR531X_WD_CTRL_NMI 0x0001
++#define AR531X_WD_CTRL_RESET 0x0002
++
++/* AR531X_ISR register bit field definitions */
++#define AR531X_ISR_NONE 0x0000
++#define AR531X_ISR_TIMER 0x0001
++#define AR531X_ISR_AHBPROC 0x0002
++#define AR531X_ISR_AHBDMA 0x0004
++#define AR531X_ISR_GPIO 0x0008
++#define AR531X_ISR_UART0 0x0010
++#define AR531X_ISR_UART0DMA 0x0020
++#define AR531X_ISR_WD 0x0040
++#define AR531X_ISR_LOCAL 0x0080
++
++/* AR531X_RESET register bit field definitions */
++#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */
++#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */
++#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
++#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
++#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
++#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
++#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
++#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
++#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
++#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
++#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
++#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
++#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
++#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */
++#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
++#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
++#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
++#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */
++
++#define AR531X_RESET_WMAC0_BITS \
++ AR531X_RESET_WLAN0 |\
++ AR531X_RESET_WARM_WLAN0_MAC |\
++ AR531X_RESET_WARM_WLAN0_BB
++
++#define AR531X_RESERT_WMAC1_BITS \
++ AR531X_RESET_WLAN1 |\
++ AR531X_RESET_WARM_WLAN1_MAC |\
++ AR531X_RESET_WARM_WLAN1_BB
++
++/* AR5312_CLOCKCTL1 register bit field definitions */
++#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
++#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
++#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
++#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
++#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
++
++/* Valid for AR5312 and AR2312 */
++#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
++#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
++#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
++#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
++#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
++
++/* Valid for AR2313 */
++#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
++#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
++#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
++#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
++#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
++
++
++/* AR531X_ENABLE register bit field definitions */
++#define AR531X_ENABLE_WLAN0 0x0001
++#define AR531X_ENABLE_ENET0 0x0002
++#define AR531X_ENABLE_ENET1 0x0004
++#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
++#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
++#define AR531X_ENABLE_WLAN1 \
++ (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
++
++/* AR531X_REV register bit field definitions */
++#define AR531X_REV_WMAC_MAJ 0xf000
++#define AR531X_REV_WMAC_MAJ_S 12
++#define AR531X_REV_WMAC_MIN 0x0f00
++#define AR531X_REV_WMAC_MIN_S 8
++#define AR531X_REV_MAJ 0x00f0
++#define AR531X_REV_MAJ_S 4
++#define AR531X_REV_MIN 0x000f
++#define AR531X_REV_MIN_S 0
++#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN)
++
++/* Major revision numbers, bits 7..4 of Revision ID register */
++#define AR531X_REV_MAJ_AR5312 0x4
++#define AR531X_REV_MAJ_AR2313 0x5
++
++/* Minor revision numbers, bits 3..0 of Revision ID register */
++#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
++#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
++
++/* AR531X_FLASHCTL register bit field definitions */
++#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
++#define FLASHCTL_IDCY_S 0
++#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
++#define FLASHCTL_WST1_S 5
++#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
++#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
++#define FLASHCTL_WST2_S 11
++#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
++#define FLASHCTL_AC_S 16
++#define FLASHCTL_AC_128K 0x00000000
++#define FLASHCTL_AC_256K 0x00010000
++#define FLASHCTL_AC_512K 0x00020000
++#define FLASHCTL_AC_1M 0x00030000
++#define FLASHCTL_AC_2M 0x00040000
++#define FLASHCTL_AC_4M 0x00050000
++#define FLASHCTL_AC_8M 0x00060000
++#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
++#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
++#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
++#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
++#define FLASHCTL_WP 0x04000000 /* Write protect */
++#define FLASHCTL_BM 0x08000000 /* Burst mode */
++#define FLASHCTL_MW 0x30000000 /* Memory width */
++#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */
++#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */
++#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */
++#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
++#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
++#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
++
++/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
++#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00)
++#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04)
++#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08)
++
++/* ARM SDRAM Controller -- just enough to determine memory size */
++#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
++#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
++#define MEM_CFG1_AC0_S 8
++#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
++#define MEM_CFG1_AC1_S 12
++
++/* GPIO Address Map */
++#define AR531X_GPIO (AR531X_APBBASE + 0x2000)
++#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */
++#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */
++#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */
++
++/* GPIO Control Register bit field definitions */
++#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
++#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */
++#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */
++#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
++#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
++#define AR531X_NUM_GPIO 8
++
++
++#endif
++
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/cpu-feature-overrides.h linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/cpu-feature-overrides.h
+--- linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/cpu-feature-overrides.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/cpu-feature-overrides.h 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,84 @@
++/*
++ * Atheros SoC specific CPU feature overrides
++ *
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This file was derived from: include/asm-mips/cpu-features.h
++ * Copyright (C) 2003, 2004 Ralf Baechle
++ * Copyright (C) 2004 Maciej W. Rozycki
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
++#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
++
++/*
++ * The ATHEROS SoCs have MIPS 4Kc/4KEc core.
++ */
++#define cpu_has_tlb 1
++#define cpu_has_4kex 1
++#define cpu_has_3k_cache 0
++#define cpu_has_4k_cache 1
++#define cpu_has_tx39_cache 0
++#define cpu_has_sb1_cache 0
++#define cpu_has_fpu 0
++#define cpu_has_32fpr 0
++#define cpu_has_counter 1
++/* #define cpu_has_watch ? */
++/* #define cpu_has_divec ? */
++/* #define cpu_has_vce ? */
++/* #define cpu_has_cache_cdex_p ? */
++/* #define cpu_has_cache_cdex_s ? */
++/* #define cpu_has_prefetch ? */
++/* #define cpu_has_mcheck ? */
++#define cpu_has_ejtag 1
++
++#if !defined(CONFIG_ATHEROS_AR5312)
++# define cpu_has_llsc 1
++#else
++/*
++ * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the
++ * ll/sc instructions.
++ */
++# define cpu_has_llsc 0
++#endif
++
++#define cpu_has_mips16 0
++#define cpu_has_mdmx 0
++#define cpu_has_mips3d 0
++#define cpu_has_smartmips 0
++
++/* #define cpu_has_vtag_icache ? */
++/* #define cpu_has_dc_aliases ? */
++/* #define cpu_has_ic_fills_f_dc ? */
++/* #define cpu_has_pindexed_dcache ? */
++
++/* #define cpu_icache_snoops_remote_store ? */
++
++#define cpu_has_mips32r1 1
++
++#if !defined(CONFIG_ATHEROS_AR5312)
++# define cpu_has_mips32r2 1
++#endif
++
++#define cpu_has_mips64r1 0
++#define cpu_has_mips64r2 0
++
++#define cpu_has_dsp 0
++#define cpu_has_mipsmt 0
++
++/* #define cpu_has_nofpuex ? */
++#define cpu_has_64bits 0
++#define cpu_has_64bit_zero_reg 0
++#define cpu_has_64bit_gp_regs 0
++#define cpu_has_64bit_addresses 0
++
++/* #define cpu_has_inclusive_pcaches ? */
++
++/* #define cpu_dcache_line_size() ? */
++/* #define cpu_icache_line_size() ? */
++
++#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/dma-coherence.h linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/dma-coherence.h
+--- linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/dma-coherence.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/dma-coherence.h 2011-05-15 21:41:19.000000000 +0200
+@@ -0,0 +1,76 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
++ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
++ *
++ */
++#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
++#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
++
++#define PCI_DMA_OFFSET 0x20000000
++
++#include <linux/device.h>
++
++static inline dma_addr_t ar231x_dev_offset(struct device *dev)
++{
++#ifdef CONFIG_PCI
++ extern struct bus_type pci_bus_type;
++
++ if (dev && dev->bus == &pci_bus_type)
++ return PCI_DMA_OFFSET;
++ else
++#endif
++ return 0;
++}
++
++static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
++{
++ return virt_to_phys(addr) + ar231x_dev_offset(dev);
++}
++
++static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
++{
++ return page_to_phys(page) + ar231x_dev_offset(dev);
++}
++
++static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
++ dma_addr_t dma_addr)
++{
++ return dma_addr - ar231x_dev_offset(dev);
++}
++
++static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
++ size_t size, enum dma_data_direction direction)
++{
++}
++
++static inline int plat_dma_supported(struct device *dev, u64 mask)
++{
++ return 1;
++}
++
++static inline void plat_extra_sync_for_device(struct device *dev)
++{
++ return;
++}
++
++static inline int plat_dma_mapping_error(struct device *dev,
++ dma_addr_t dma_addr)
++{
++ return 0;
++}
++
++static inline int plat_device_is_coherent(struct device *dev)
++{
++#ifdef CONFIG_DMA_COHERENT
++ return 1;
++#endif
++#ifdef CONFIG_DMA_NONCOHERENT
++ return 0;
++#endif
++}
++
++#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/gpio.h linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/gpio.h
+--- linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/gpio.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/gpio.h 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,84 @@
++#ifndef _ATHEROS_GPIO_H_
++#define _ATHEROS_GPIO_H_
++
++#include <ar231x.h>
++
++struct ar231x_gpiodev {
++ u32 valid_mask;
++ u32 (*get_output)(void);
++ u32 (*set_output)(u32 mask, u32 val);
++ u32 (*get)(void);
++ u32 (*set)(u32 mask, u32 val);
++};
++
++extern const struct ar231x_gpiodev *ar231x_gpiodev;
++
++/*
++ * Wrappers for the generic GPIO layer
++ */
++
++static inline int gpio_direction_input(unsigned gpio) {
++ u32 mask = 1 << gpio;
++
++ if (!(ar231x_gpiodev->valid_mask & mask))
++ return -ENXIO;
++
++ ar231x_gpiodev->set_output(mask, 0);
++ return 0;
++}
++
++static inline void gpio_set_value(unsigned gpio, int value) {
++ u32 mask = 1 << gpio;
++
++ if (!(ar231x_gpiodev->valid_mask & mask))
++ return;
++
++ ar231x_gpiodev->set(mask, (!!value) * mask);
++}
++
++static inline int gpio_direction_output(unsigned gpio, int value) {
++ u32 mask = 1 << gpio;
++
++ if (!(ar231x_gpiodev->valid_mask & mask))
++ return -ENXIO;
++
++ ar231x_gpiodev->set_output(mask, mask);
++ ar231x_gpiodev->set(mask, (!!value) * mask);
++ return 0;
++}
++
++/* Reads the gpio pin. Unchecked function */
++static inline int gpio_get_value(unsigned gpio) {
++ u32 mask = 1 << gpio;
++
++ if (!(ar231x_gpiodev->valid_mask & mask))
++ return 0;
++
++ return !!(ar231x_gpiodev->get() & mask);
++}
++
++static inline int gpio_request(unsigned gpio, const char *label) {
++ return 0;
++}
++
++static inline void gpio_free(unsigned gpio) {
++}
++
++/* Returns IRQ to attach for gpio. Unchecked function */
++static inline int gpio_to_irq(unsigned gpio) {
++ return AR531X_GPIO_IRQ(gpio);
++}
++
++/* Returns gpio for IRQ attached. Unchecked function */
++static inline int irq_to_gpio(unsigned irq) {
++ return (irq - (AR531X_GPIO_IRQ(0)));
++}
++
++static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
++{
++ return -ENOSYS;
++}
++
++#include <asm-generic/gpio.h> /* cansleep wrappers */
++
++#endif
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/reset.h linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/reset.h
+--- linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/reset.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/reset.h 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,6 @@
++#ifndef __AR531X_RESET_H
++#define __AR531X_RESET_H
++
++void ar531x_disable_reset_button(void);
++
++#endif /* __AR531X_RESET_H */
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/war.h linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/war.h
+--- linux-2.6.39-rc7.orig/arch/mips/include/asm/mach-ar231x/war.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/arch/mips/include/asm/mach-ar231x/war.h 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,25 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
++ */
++#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H
++#define __ASM_MIPS_MACH_ATHEROS_WAR_H
++
++#define R4600_V1_INDEX_ICACHEOP_WAR 0
++#define R4600_V1_HIT_CACHEOP_WAR 0
++#define R4600_V2_HIT_CACHEOP_WAR 0
++#define R5432_CP0_INTERRUPT_WAR 0
++#define BCM1250_M3_WAR 0
++#define SIBYTE_1956_WAR 0
++#define MIPS4K_ICACHE_REFILL_WAR 0
++#define MIPS_CACHE_SYNC_WAR 0
++#define TX49XX_ICACHE_INDEX_INV_WAR 0
++#define RM9000_CDEX_SMP_WAR 0
++#define ICACHE_REFILLS_WORKAROUND_WAR 0
++#define R10000_LLSC_WAR 0
++#define MIPS34K_MISSED_ITLB_WAR 0
++
++#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */
+diff -Nur linux-2.6.39-rc7.orig/arch/mips/kernel/cevt-r4k.c linux-2.6.39-rc7/arch/mips/kernel/cevt-r4k.c
+--- linux-2.6.39-rc7.orig/arch/mips/kernel/cevt-r4k.c 2011-05-10 04:33:54.000000000 +0200
++++ linux-2.6.39-rc7/arch/mips/kernel/cevt-r4k.c 2011-05-15 21:34:57.000000000 +0200
+@@ -168,20 +168,23 @@
+ struct clock_event_device *cd;
+ unsigned int irq;
+
+- if (!cpu_has_counter || !mips_hpt_frequency)
+- return -ENXIO;
+-
+- if (!c0_compare_int_usable())
+- return -ENXIO;
+-
+ /*
+ * With vectored interrupts things are getting platform specific.
+ * get_c0_compare_int is a hook to allow a platform to return the
+ * interrupt number of it's liking.
+ */
+ irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+- if (get_c0_compare_int)
++ if (get_c0_compare_int) {
+ irq = get_c0_compare_int();
++ if ((irq >= MIPS_CPU_IRQ_BASE) && (irq < MIPS_CPU_IRQ_BASE + 8))
++ cp0_compare_irq = irq - MIPS_CPU_IRQ_BASE;
++ }
++
++ if (!cpu_has_counter || !mips_hpt_frequency)
++ return -ENXIO;
++
++ if (!c0_compare_int_usable())
++ return -ENXIO;
+
+ cd = &per_cpu(mips_clockevent_device, cpu);
+
+diff -Nur linux-2.6.39-rc7.orig/drivers/mtd/devices/Kconfig linux-2.6.39-rc7/drivers/mtd/devices/Kconfig
+--- linux-2.6.39-rc7.orig/drivers/mtd/devices/Kconfig 2011-05-10 04:33:54.000000000 +0200
++++ linux-2.6.39-rc7/drivers/mtd/devices/Kconfig 2011-05-15 21:34:57.000000000 +0200
+@@ -112,6 +112,10 @@
+ Set up your spi devices with the right board-specific platform data,
+ if you want to specify device partitioning.
+
++config MTD_AR2315
++ tristate "Atheros AR2315+ SPI Flash support"
++ depends on ATHEROS_AR2315
++
+ config MTD_SLRAM
+ tristate "Uncached system RAM"
+ help
+diff -Nur linux-2.6.39-rc7.orig/drivers/mtd/devices/Makefile linux-2.6.39-rc7/drivers/mtd/devices/Makefile
+--- linux-2.6.39-rc7.orig/drivers/mtd/devices/Makefile 2011-05-10 04:33:54.000000000 +0200
++++ linux-2.6.39-rc7/drivers/mtd/devices/Makefile 2011-05-15 21:34:57.000000000 +0200
+@@ -17,3 +17,4 @@
+ obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
+ obj-$(CONFIG_MTD_M25P80) += m25p80.o
+ obj-$(CONFIG_MTD_SST25L) += sst25l.o
++obj-$(CONFIG_MTD_AR2315) += ar2315.o
+diff -Nur linux-2.6.39-rc7.orig/drivers/mtd/devices/ar2315.c linux-2.6.39-rc7/drivers/mtd/devices/ar2315.c
+--- linux-2.6.39-rc7.orig/drivers/mtd/devices/ar2315.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/drivers/mtd/devices/ar2315.c 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,517 @@
++
++/*
++ * MTD driver for the SPI Flash Memory support on Atheros AR2315
++ *
++ * Copyright (c) 2005-2006 Atheros Communications Inc.
++ * Copyright (C) 2006-2007 FON Technology, SL.
++ * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++ *
++ * This code is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/version.h>
++#include <linux/errno.h>
++#include <linux/slab.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++#include <linux/sched.h>
++#include <linux/root_dev.h>
++#include <linux/delay.h>
++#include <asm/delay.h>
++#include <asm/io.h>
++
++#include <ar2315_spiflash.h>
++#include <ar231x_platform.h>
++#include <ar231x.h>
++
++
++#define SPIFLASH "spiflash: "
++#define busy_wait(_priv, _condition, _wait) do { \
++ while (_condition) { \
++ spin_unlock_bh(&_priv->lock); \
++ if (_wait > 1) \
++ msleep(_wait); \
++ else if ((_wait == 1) && need_resched()) \
++ schedule(); \
++ else \
++ udelay(1); \
++ spin_lock_bh(&_priv->lock); \
++ } \
++} while (0)
++
++enum {
++ FLASH_NONE,
++ FLASH_1MB,
++ FLASH_2MB,
++ FLASH_4MB,
++ FLASH_8MB,
++ FLASH_16MB,
++};
++
++/* Flash configuration table */
++struct flashconfig {
++ u32 byte_cnt;
++ u32 sector_cnt;
++ u32 sector_size;
++};
++
++const struct flashconfig flashconfig_tbl[] = {
++ [FLASH_NONE] = { 0, 0, 0},
++ [FLASH_1MB] = { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE},
++ [FLASH_2MB] = { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE},
++ [FLASH_4MB] = { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE},
++ [FLASH_8MB] = { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE},
++ [FLASH_16MB] = { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE}
++};
++
++/* Mapping of generic opcodes to STM serial flash opcodes */
++enum {
++ SPI_WRITE_ENABLE,
++ SPI_WRITE_DISABLE,
++ SPI_RD_STATUS,
++ SPI_WR_STATUS,
++ SPI_RD_DATA,
++ SPI_FAST_RD_DATA,
++ SPI_PAGE_PROGRAM,
++ SPI_SECTOR_ERASE,
++ SPI_BULK_ERASE,
++ SPI_DEEP_PWRDOWN,
++ SPI_RD_SIG,
++};
++
++struct opcodes {
++ __u16 code;
++ __s8 tx_cnt;
++ __s8 rx_cnt;
++};
++const struct opcodes stm_opcodes[] = {
++ [SPI_WRITE_ENABLE] = {STM_OP_WR_ENABLE, 1, 0},
++ [SPI_WRITE_DISABLE] = {STM_OP_WR_DISABLE, 1, 0},
++ [SPI_RD_STATUS] = {STM_OP_RD_STATUS, 1, 1},
++ [SPI_WR_STATUS] = {STM_OP_WR_STATUS, 1, 0},
++ [SPI_RD_DATA] = {STM_OP_RD_DATA, 4, 4},
++ [SPI_FAST_RD_DATA] = {STM_OP_FAST_RD_DATA, 5, 0},
++ [SPI_PAGE_PROGRAM] = {STM_OP_PAGE_PGRM, 8, 0},
++ [SPI_SECTOR_ERASE] = {STM_OP_SECTOR_ERASE, 4, 0},
++ [SPI_BULK_ERASE] = {STM_OP_BULK_ERASE, 1, 0},
++ [SPI_DEEP_PWRDOWN] = {STM_OP_DEEP_PWRDOWN, 1, 0},
++ [SPI_RD_SIG] = {STM_OP_RD_SIG, 4, 1},
++};
++
++/* Driver private data structure */
++struct spiflash_priv {
++ struct mtd_info mtd;
++ void *readaddr; /* memory mapped data for read */
++ void *mmraddr; /* memory mapped register space */
++ wait_queue_head_t wq;
++ spinlock_t lock;
++ int state;
++};
++
++#define to_spiflash(_mtd) container_of(_mtd, struct spiflash_priv, mtd)
++
++enum {
++ FL_READY,
++ FL_READING,
++ FL_ERASING,
++ FL_WRITING
++};
++
++/***************************************************************************************************/
++
++static u32
++spiflash_read_reg(struct spiflash_priv *priv, int reg)
++{
++ return ar231x_read_reg((u32) priv->mmraddr + reg);
++}
++
++static void
++spiflash_write_reg(struct spiflash_priv *priv, int reg, u32 data)
++{
++ ar231x_write_reg((u32) priv->mmraddr + reg, data);
++}
++
++static u32
++spiflash_wait_busy(struct spiflash_priv *priv)
++{
++ u32 reg;
++
++ busy_wait(priv, (reg = spiflash_read_reg(priv, SPI_FLASH_CTL)) &
++ SPI_CTL_BUSY, 0);
++ return reg;
++}
++
++static u32
++spiflash_sendcmd (struct spiflash_priv *priv, int opcode, u32 addr)
++{
++ const struct opcodes *op;
++ u32 reg, mask;
++
++ op = &stm_opcodes[opcode];
++ reg = spiflash_wait_busy(priv);
++ spiflash_write_reg(priv, SPI_FLASH_OPCODE,
++ ((u32) op->code) | (addr << 8));
++
++ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
++ reg |= SPI_CTL_START | op->tx_cnt | (op->rx_cnt << 4);
++
++ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
++ spiflash_wait_busy(priv);
++
++ if (!op->rx_cnt)
++ return 0;
++
++ reg = spiflash_read_reg(priv, SPI_FLASH_DATA);
++
++ switch (op->rx_cnt) {
++ case 1:
++ mask = 0x000000ff;
++ break;
++ case 2:
++ mask = 0x0000ffff;
++ break;
++ case 3:
++ mask = 0x00ffffff;
++ break;
++ default:
++ mask = 0xffffffff;
++ break;
++ }
++ reg &= mask;
++
++ return reg;
++}
++
++
++/*
++ * Probe SPI flash device
++ * Function returns 0 for failure.
++ * and flashconfig_tbl array index for success.
++ */
++static int
++spiflash_probe_chip (struct spiflash_priv *priv)
++{
++ u32 sig;
++ int flash_size;
++
++ /* Read the signature on the flash device */
++ spin_lock_bh(&priv->lock);
++ sig = spiflash_sendcmd(priv, SPI_RD_SIG, 0);
++ spin_unlock_bh(&priv->lock);
++
++ switch (sig) {
++ case STM_8MBIT_SIGNATURE:
++ flash_size = FLASH_1MB;
++ break;
++ case STM_16MBIT_SIGNATURE:
++ flash_size = FLASH_2MB;
++ break;
++ case STM_32MBIT_SIGNATURE:
++ flash_size = FLASH_4MB;
++ break;
++ case STM_64MBIT_SIGNATURE:
++ flash_size = FLASH_8MB;
++ break;
++ case STM_128MBIT_SIGNATURE:
++ flash_size = FLASH_16MB;
++ break;
++ default:
++ printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n");
++ return 0;
++ }
++
++ return flash_size;
++}
++
++
++/* wait until the flash chip is ready and grab a lock */
++static int spiflash_wait_ready(struct spiflash_priv *priv, int state)
++{
++ DECLARE_WAITQUEUE(wait, current);
++
++retry:
++ spin_lock_bh(&priv->lock);
++ if (priv->state != FL_READY) {
++ set_current_state(TASK_UNINTERRUPTIBLE);
++ add_wait_queue(&priv->wq, &wait);
++ spin_unlock_bh(&priv->lock);
++ schedule();
++ remove_wait_queue(&priv->wq, &wait);
++
++ if(signal_pending(current))
++ return 0;
++
++ goto retry;
++ }
++ priv->state = state;
++
++ return 1;
++}
++
++static inline void spiflash_done(struct spiflash_priv *priv)
++{
++ priv->state = FL_READY;
++ spin_unlock_bh(&priv->lock);
++ wake_up(&priv->wq);
++}
++
++static void
++spiflash_wait_complete(struct spiflash_priv *priv, unsigned int timeout)
++{
++ busy_wait(priv, spiflash_sendcmd(priv, SPI_RD_STATUS, 0) &
++ SPI_STATUS_WIP, timeout);
++ spiflash_done(priv);
++}
++
++
++
++static int
++spiflash_erase (struct mtd_info *mtd, struct erase_info *instr)
++{
++ struct spiflash_priv *priv = to_spiflash(mtd);
++ const struct opcodes *op;
++ u32 temp, reg;
++
++ if (instr->addr + instr->len > mtd->size)
++ return -EINVAL;
++
++ if (!spiflash_wait_ready(priv, FL_ERASING))
++ return -EINTR;
++
++ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
++ reg = spiflash_wait_busy(priv);
++
++ op = &stm_opcodes[SPI_SECTOR_ERASE];
++ temp = ((u32)instr->addr << 8) | (u32)(op->code);
++ spiflash_write_reg(priv, SPI_FLASH_OPCODE, temp);
++
++ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
++ reg |= op->tx_cnt | SPI_CTL_START;
++ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
++
++ spiflash_wait_complete(priv, 20);
++
++ instr->state = MTD_ERASE_DONE;
++ mtd_erase_callback(instr);
++
++ return 0;
++}
++
++static int
++spiflash_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
++{
++ struct spiflash_priv *priv = to_spiflash(mtd);
++ u8 *read_addr;
++
++ if (!len)
++ return 0;
++
++ if (from + len > mtd->size)
++ return -EINVAL;
++
++ *retlen = len;
++
++ if (!spiflash_wait_ready(priv, FL_READING))
++ return -EINTR;
++
++ read_addr = (u8 *)(priv->readaddr + from);
++ memcpy_fromio(buf, read_addr, len);
++ spiflash_done(priv);
++
++ return 0;
++}
++
++static int
++spiflash_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u8 *buf)
++{
++ struct spiflash_priv *priv = to_spiflash(mtd);
++ u32 opcode, bytes_left;
++
++ *retlen = 0;
++
++ if (!len)
++ return 0;
++
++ if (to + len > mtd->size)
++ return -EINVAL;
++
++ bytes_left = len;
++
++ do {
++ u32 read_len, reg, page_offset, spi_data = 0;
++
++ read_len = min(bytes_left, sizeof(u32));
++
++ /* 32-bit writes cannot span across a page boundary
++ * (256 bytes). This types of writes require two page
++ * program operations to handle it correctly. The STM part
++ * will write the overflow data to the beginning of the
++ * current page as opposed to the subsequent page.
++ */
++ page_offset = (to & (STM_PAGE_SIZE - 1)) + read_len;
++
++ if (page_offset > STM_PAGE_SIZE)
++ read_len -= (page_offset - STM_PAGE_SIZE);
++
++ if (!spiflash_wait_ready(priv, FL_WRITING))
++ return -EINTR;
++
++ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
++ spi_data = 0;
++ switch (read_len) {
++ case 4:
++ spi_data |= buf[3] << 24;
++ /* fall through */
++ case 3:
++ spi_data |= buf[2] << 16;
++ /* fall through */
++ case 2:
++ spi_data |= buf[1] << 8;
++ /* fall through */
++ case 1:
++ spi_data |= buf[0] & 0xff;
++ break;
++ default:
++ break;
++ }
++
++ spiflash_write_reg(priv, SPI_FLASH_DATA, spi_data);
++ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code |
++ (to & 0x00ffffff) << 8;
++ spiflash_write_reg(priv, SPI_FLASH_OPCODE, opcode);
++
++ reg = spiflash_read_reg(priv, SPI_FLASH_CTL);
++ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
++ reg |= (read_len + 4) | SPI_CTL_START;
++ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
++
++ spiflash_wait_complete(priv, 1);
++
++ bytes_left -= read_len;
++ to += read_len;
++ buf += read_len;
++
++ *retlen += read_len;
++ } while (bytes_left != 0);
++
++ return 0;
++}
++
++
++#ifdef CONFIG_MTD_PARTITIONS
++static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "MyLoader", NULL };
++#endif
++
++
++static int
++spiflash_probe(struct platform_device *pdev)
++{
++ struct spiflash_priv *priv;
++ struct mtd_partition *parts;
++ struct mtd_info *mtd;
++ int index, num_parts;
++ int result = 0;
++
++ priv = kzalloc(sizeof(struct spiflash_priv), GFP_KERNEL);
++ spin_lock_init(&priv->lock);
++ init_waitqueue_head(&priv->wq);
++ priv->state = FL_READY;
++ mtd = &priv->mtd;
++
++ priv->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
++ if (!priv->mmraddr) {
++ printk(KERN_WARNING SPIFLASH "Failed to map flash device\n");
++ goto error;
++ }
++
++ index = spiflash_probe_chip(priv);
++ if (!index) {
++ printk (KERN_WARNING SPIFLASH "Found no serial flash device\n");
++ goto error;
++ }
++
++ priv->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
++ if (!priv->readaddr) {
++ printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
++ goto error;
++ }
++
++ platform_set_drvdata(pdev, priv);
++ mtd->name = "spiflash";
++ mtd->type = MTD_NORFLASH;
++ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
++ mtd->size = flashconfig_tbl[index].byte_cnt;
++ mtd->erasesize = flashconfig_tbl[index].sector_size;
++ mtd->writesize = 1;
++ mtd->numeraseregions = 0;
++ mtd->eraseregions = NULL;
++ mtd->erase = spiflash_erase;
++ mtd->read = spiflash_read;
++ mtd->write = spiflash_write;
++ mtd->owner = THIS_MODULE;
++
++#ifdef CONFIG_MTD_PARTITIONS
++ /* parse redboot partitions */
++ num_parts = parse_mtd_partitions(mtd, part_probe_types, &parts, 0);
++ if (!num_parts)
++ goto error;
++
++ result = add_mtd_partitions(mtd, parts, num_parts);
++#endif
++
++ return result;
++
++error:
++ if (priv->mmraddr)
++ iounmap(priv->mmraddr);
++ kfree(priv);
++ return -ENXIO;
++}
++
++static int
++spiflash_remove (struct platform_device *pdev)
++{
++ struct spiflash_priv *priv = platform_get_drvdata(pdev);
++ struct mtd_info *mtd = &priv->mtd;
++
++ del_mtd_partitions(mtd);
++ iounmap(priv->mmraddr);
++ iounmap(priv->readaddr);
++ kfree(priv);
++
++ return 0;
++}
++
++struct platform_driver spiflash_driver = {
++ .driver.name = "spiflash",
++ .probe = spiflash_probe,
++ .remove = spiflash_remove,
++};
++
++int __init
++spiflash_init (void)
++{
++ return platform_driver_register(&spiflash_driver);
++}
++
++void __exit
++spiflash_exit (void)
++{
++ return platform_driver_unregister(&spiflash_driver);
++}
++
++module_init (spiflash_init);
++module_exit (spiflash_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc");
++MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC");
++
+diff -Nur linux-2.6.39-rc7.orig/drivers/mtd/redboot.c linux-2.6.39-rc7/drivers/mtd/redboot.c
+--- linux-2.6.39-rc7.orig/drivers/mtd/redboot.c 2011-05-10 04:33:54.000000000 +0200
++++ linux-2.6.39-rc7/drivers/mtd/redboot.c 2011-05-15 21:34:57.000000000 +0200
+@@ -55,6 +55,22 @@
+ return 1;
+ }
+
++static uint32_t mtd_get_offset_erasesize(struct mtd_info *mtd, uint64_t offset)
++{
++ struct mtd_erase_region_info *regions = mtd->eraseregions;
++ int i;
++
++ for (i = 0; i < mtd->numeraseregions; i++) {
++ if (regions[i].offset +
++ regions[i].numblocks * regions[i].erasesize <= offset)
++ continue;
++
++ return regions[i].erasesize;
++ }
++
++ return mtd->erasesize;
++}
++
+ static int parse_redboot_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ unsigned long fis_origin)
+@@ -70,36 +86,38 @@
+ int namelen = 0;
+ int nulllen = 0;
+ int numslots;
++ int first_slot;
+ unsigned long offset;
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ static char nullstring[] = "unallocated";
+ #endif
+
++ buf = vmalloc(master->erasesize);
++ if (!buf)
++ return -ENOMEM;
++
++ restart:
+ if ( directory < 0 ) {
+ offset = master->size + directory * master->erasesize;
+- while (master->block_isbad &&
++ while (master->block_isbad &&
+ master->block_isbad(master, offset)) {
+ if (!offset) {
+ nogood:
+ printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++ vfree(buf);
+ return -EIO;
+ }
+ offset -= master->erasesize;
+ }
+ } else {
+ offset = directory * master->erasesize;
+- while (master->block_isbad &&
++ while (master->block_isbad &&
+ master->block_isbad(master, offset)) {
+ offset += master->erasesize;
+ if (offset == master->size)
+ goto nogood;
+ }
+ }
+- buf = vmalloc(master->erasesize);
+-
+- if (!buf)
+- return -ENOMEM;
+-
+ printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+ master->name, offset);
+
+@@ -171,13 +189,21 @@
+ }
+ if (i == numslots) {
+ /* Didn't find it */
++ if (offset + master->erasesize < master->size) {
++ /* not at the end of the flash yet, maybe next block :) */
++ directory++;
++ goto restart;
++ }
+ printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+ master->name);
+ ret = 0;
+ goto out;
+ }
+
+- for (i = 0; i < numslots; i++) {
++ first_slot = (buf[i].flash_base & (master->erasesize - 1)) /
++ sizeof(struct fis_image_desc);
++
++ for (i = first_slot; i < first_slot + numslots; i++) {
+ struct fis_list *new_fl, **prev;
+
+ if (buf[i].name[0] == 0xff) {
+diff -Nur linux-2.6.39-rc7.orig/drivers/net/Kconfig linux-2.6.39-rc7/drivers/net/Kconfig
+--- linux-2.6.39-rc7.orig/drivers/net/Kconfig 2011-05-10 04:33:54.000000000 +0200
++++ linux-2.6.39-rc7/drivers/net/Kconfig 2011-05-15 21:34:57.000000000 +0200
+@@ -251,6 +251,12 @@
+ help
+ Select this if your platform comes with an external 93CX6 eeprom.
+
++config AR231X_ETHERNET
++ tristate "AR231x Ethernet support"
++ depends on ATHEROS_AR231X
++ help
++ Support for the AR231x/531x ethernet controller
++
+ config MACE
+ tristate "MACE (Power Mac ethernet) support"
+ depends on PPC_PMAC && PPC32
+diff -Nur linux-2.6.39-rc7.orig/drivers/net/Makefile linux-2.6.39-rc7/drivers/net/Makefile
+--- linux-2.6.39-rc7.orig/drivers/net/Makefile 2011-05-10 04:33:54.000000000 +0200
++++ linux-2.6.39-rc7/drivers/net/Makefile 2011-05-15 21:34:57.000000000 +0200
+@@ -226,6 +226,7 @@
+ obj-$(CONFIG_KORINA) += korina.o
+ obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
+ obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
++obj-$(CONFIG_AR231X_ETHERNET) += ar231x.o
+ obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
+ obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
+ obj-$(CONFIG_DECLANCE) += declance.o
+diff -Nur linux-2.6.39-rc7.orig/drivers/net/ar231x.c linux-2.6.39-rc7/drivers/net/ar231x.c
+--- linux-2.6.39-rc7.orig/drivers/net/ar231x.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/drivers/net/ar231x.c 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,1293 @@
++/*
++ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device.
++ *
++ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++ *
++ * Thanks to Atheros for providing hardware and documentation
++ * enabling me to write this driver.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * Additional credits:
++ * This code is taken from John Taylor's Sibyte driver and then
++ * modified for the AR2313.
++ */
++
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/ioport.h>
++#include <linux/pci.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/skbuff.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/mm.h>
++#include <linux/highmem.h>
++#include <linux/sockios.h>
++#include <linux/pkt_sched.h>
++#include <linux/mii.h>
++#include <linux/phy.h>
++#include <linux/ethtool.h>
++#include <linux/ctype.h>
++#include <linux/platform_device.h>
++
++#include <net/sock.h>
++#include <net/ip.h>
++
++#include <asm/system.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/byteorder.h>
++#include <asm/uaccess.h>
++#include <asm/bootinfo.h>
++
++#define AR2313_MTU 1692
++#define AR2313_PRIOS 1
++#define AR2313_QUEUES (2*AR2313_PRIOS)
++#define AR2313_DESCR_ENTRIES 64
++
++
++#ifndef min
++#define min(a,b) (((a)<(b))?(a):(b))
++#endif
++
++#ifndef SMP_CACHE_BYTES
++#define SMP_CACHE_BYTES L1_CACHE_BYTES
++#endif
++
++#define AR2313_MBOX_SET_BIT 0x8
++
++#include "ar231x.h"
++
++/*
++ * New interrupt handler strategy:
++ *
++ * An old interrupt handler worked using the traditional method of
++ * replacing an skbuff with a new one when a packet arrives. However
++ * the rx rings do not need to contain a static number of buffer
++ * descriptors, thus it makes sense to move the memory allocation out
++ * of the main interrupt handler and do it in a bottom half handler
++ * and only allocate new buffers when the number of buffers in the
++ * ring is below a certain threshold. In order to avoid starving the
++ * NIC under heavy load it is however necessary to force allocation
++ * when hitting a minimum threshold. The strategy for alloction is as
++ * follows:
++ *
++ * RX_LOW_BUF_THRES - allocate buffers in the bottom half
++ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate
++ * the buffers in the interrupt handler
++ * RX_RING_THRES - maximum number of buffers in the rx ring
++ *
++ * One advantagous side effect of this allocation approach is that the
++ * entire rx processing can be done without holding any spin lock
++ * since the rx rings and registers are totally independent of the tx
++ * ring and its registers. This of course includes the kmalloc's of
++ * new skb's. Thus start_xmit can run in parallel with rx processing
++ * and the memory allocation on SMP systems.
++ *
++ * Note that running the skb reallocation in a bottom half opens up
++ * another can of races which needs to be handled properly. In
++ * particular it can happen that the interrupt handler tries to run
++ * the reallocation while the bottom half is either running on another
++ * CPU or was interrupted on the same CPU. To get around this the
++ * driver uses bitops to prevent the reallocation routines from being
++ * reentered.
++ *
++ * TX handling can also be done without holding any spin lock, wheee
++ * this is fun! since tx_csm is only written to by the interrupt
++ * handler.
++ */
++
++/*
++ * Threshold values for RX buffer allocation - the low water marks for
++ * when to start refilling the rings are set to 75% of the ring
++ * sizes. It seems to make sense to refill the rings entirely from the
++ * intrrupt handler once it gets below the panic threshold, that way
++ * we don't risk that the refilling is moved to another CPU when the
++ * one running the interrupt handler just got the slab code hot in its
++ * cache.
++ */
++#define RX_RING_SIZE AR2313_DESCR_ENTRIES
++#define RX_PANIC_THRES (RX_RING_SIZE/4)
++#define RX_LOW_THRES ((3*RX_RING_SIZE)/4)
++#define CRC_LEN 4
++#define RX_OFFSET 2
++
++#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
++#define VLAN_HDR 4
++#else
++#define VLAN_HDR 0
++#endif
++
++#define AR2313_BUFSIZE (AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + RX_OFFSET)
++
++#ifdef MODULE
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>");
++MODULE_DESCRIPTION("AR231x Ethernet driver");
++#endif
++
++#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
++
++// prototypes
++static void ar231x_halt(struct net_device *dev);
++static void rx_tasklet_func(unsigned long data);
++static void rx_tasklet_cleanup(struct net_device *dev);
++static void ar231x_multicast_list(struct net_device *dev);
++static void ar231x_tx_timeout(struct net_device *dev);
++
++static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
++static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
++static int ar231x_mdiobus_reset(struct mii_bus *bus);
++static int ar231x_mdiobus_probe (struct net_device *dev);
++static void ar231x_adjust_link(struct net_device *dev);
++
++#ifndef ERR
++#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
++#endif
++
++#ifdef CONFIG_NET_POLL_CONTROLLER
++static void
++ar231x_netpoll(struct net_device *dev)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++ ar231x_interrupt(dev->irq, dev);
++ local_irq_restore(flags);
++}
++#endif
++
++static const struct net_device_ops ar231x_ops = {
++ .ndo_open = ar231x_open,
++ .ndo_stop = ar231x_close,
++ .ndo_start_xmit = ar231x_start_xmit,
++ .ndo_set_multicast_list = ar231x_multicast_list,
++ .ndo_do_ioctl = ar231x_ioctl,
++ .ndo_change_mtu = eth_change_mtu,
++ .ndo_validate_addr = eth_validate_addr,
++ .ndo_set_mac_address = eth_mac_addr,
++ .ndo_tx_timeout = ar231x_tx_timeout,
++#ifdef CONFIG_NET_POLL_CONTROLLER
++ .ndo_poll_controller = ar231x_netpoll,
++#endif
++};
++
++int __init ar231x_probe(struct platform_device *pdev)
++{
++ struct net_device *dev;
++ struct ar231x_private *sp;
++ struct resource *res;
++ unsigned long ar_eth_base;
++ char buf[64];
++
++ dev = alloc_etherdev(sizeof(struct ar231x_private));
++
++ if (dev == NULL) {
++ printk(KERN_ERR
++ "ar231x: Unable to allocate net_device structure!\n");
++ return -ENOMEM;
++ }
++
++ platform_set_drvdata(pdev, dev);
++
++ sp = netdev_priv(dev);
++ sp->dev = dev;
++ sp->cfg = pdev->dev.platform_data;
++
++ sprintf(buf, "eth%d_membase", pdev->id);
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf);
++ if (!res)
++ return -ENODEV;
++
++ sp->link = 0;
++ ar_eth_base = res->start;
++
++ sprintf(buf, "eth%d_irq", pdev->id);
++ dev->irq = platform_get_irq_byname(pdev, buf);
++
++ spin_lock_init(&sp->lock);
++
++ dev->features |= NETIF_F_HIGHDMA;
++ dev->netdev_ops = &ar231x_ops;
++
++ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
++ tasklet_disable(&sp->rx_tasklet);
++
++ sp->eth_regs =
++ ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs));
++ if (!sp->eth_regs) {
++ printk("Can't remap eth registers\n");
++ return (-ENXIO);
++ }
++
++ /*
++ * When there's only one MAC, PHY regs are typically on ENET0,
++ * even though the MAC might be on ENET1.
++ * Needto remap PHY regs separately in this case
++ */
++ if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs))
++ sp->phy_regs = sp->eth_regs;
++ else {
++ sp->phy_regs =
++ ioremap_nocache(virt_to_phys(sp->cfg->phy_base),
++ sizeof(*sp->phy_regs));
++ if (!sp->phy_regs) {
++ printk("Can't remap phy registers\n");
++ return (-ENXIO);
++ }
++ }
++
++ sp->dma_regs =
++ ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000),
++ sizeof(*sp->dma_regs));
++ dev->base_addr = (unsigned int) sp->dma_regs;
++ if (!sp->dma_regs) {
++ printk("Can't remap DMA registers\n");
++ return (-ENXIO);
++ }
++
++ sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4);
++ if (!sp->int_regs) {
++ printk("Can't remap INTERRUPT registers\n");
++ return (-ENXIO);
++ }
++
++ strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
++ sp->name[sizeof(sp->name) - 1] = '\0';
++ memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
++
++ if (ar231x_init(dev)) {
++ /*
++ * ar231x_init() calls ar231x_init_cleanup() on error.
++ */
++ kfree(dev);
++ return -ENODEV;
++ }
++
++ if (register_netdev(dev)) {
++ printk("%s: register_netdev failed\n", __func__);
++ return -1;
++ }
++
++ printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
++ dev->name, sp->name,
++ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
++ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
++
++ sp->mii_bus = mdiobus_alloc();
++ if (sp->mii_bus == NULL)
++ return -1;
++
++ sp->mii_bus->priv = dev;
++ sp->mii_bus->read = ar231x_mdiobus_read;
++ sp->mii_bus->write = ar231x_mdiobus_write;
++ sp->mii_bus->reset = ar231x_mdiobus_reset;
++ sp->mii_bus->name = "ar231x_eth_mii";
++ snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "%d", pdev->id);
++ sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL);
++ *sp->mii_bus->irq = PHY_POLL;
++
++ mdiobus_register(sp->mii_bus);
++
++ if (ar231x_mdiobus_probe(dev) != 0) {
++ printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
++ rx_tasklet_cleanup(dev);
++ ar231x_init_cleanup(dev);
++ unregister_netdev(dev);
++ kfree(dev);
++ return -ENODEV;
++ }
++
++ /* start link poll timer */
++ ar231x_setup_timer(dev);
++
++ return 0;
++}
++
++
++static void ar231x_multicast_list(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned int filter;
++
++ filter = sp->eth_regs->mac_control;
++
++ if (dev->flags & IFF_PROMISC)
++ filter |= MAC_CONTROL_PR;
++ else
++ filter &= ~MAC_CONTROL_PR;
++ if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 0))
++ filter |= MAC_CONTROL_PM;
++ else
++ filter &= ~MAC_CONTROL_PM;
++
++ sp->eth_regs->mac_control = filter;
++}
++
++static void rx_tasklet_cleanup(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ /*
++ * Tasklet may be scheduled. Need to get it removed from the list
++ * since we're about to free the struct.
++ */
++
++ sp->unloading = 1;
++ tasklet_enable(&sp->rx_tasklet);
++ tasklet_kill(&sp->rx_tasklet);
++}
++
++static int __devexit ar231x_remove(struct platform_device *pdev)
++{
++ struct net_device *dev = platform_get_drvdata(pdev);
++ struct ar231x_private *sp = netdev_priv(dev);
++ rx_tasklet_cleanup(dev);
++ ar231x_init_cleanup(dev);
++ unregister_netdev(dev);
++ mdiobus_unregister(sp->mii_bus);
++ mdiobus_free(sp->mii_bus);
++ kfree(dev);
++ return 0;
++}
++
++
++/*
++ * Restart the AR2313 ethernet controller.
++ */
++static int ar231x_restart(struct net_device *dev)
++{
++ /* disable interrupts */
++ disable_irq(dev->irq);
++
++ /* stop mac */
++ ar231x_halt(dev);
++
++ /* initialize */
++ ar231x_init(dev);
++
++ /* enable interrupts */
++ enable_irq(dev->irq);
++
++ return 0;
++}
++
++static struct platform_driver ar231x_driver = {
++ .driver.name = "ar231x-eth",
++ .probe = ar231x_probe,
++ .remove = __devexit_p(ar231x_remove),
++};
++
++int __init ar231x_module_init(void)
++{
++ return platform_driver_register(&ar231x_driver);
++}
++
++void __exit ar231x_module_cleanup(void)
++{
++ platform_driver_unregister(&ar231x_driver);
++}
++
++module_init(ar231x_module_init);
++module_exit(ar231x_module_cleanup);
++
++
++static void ar231x_free_descriptors(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ if (sp->rx_ring != NULL) {
++ kfree((void *) KSEG0ADDR(sp->rx_ring));
++ sp->rx_ring = NULL;
++ sp->tx_ring = NULL;
++ }
++}
++
++
++static int ar231x_allocate_descriptors(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ int size;
++ int j;
++ ar231x_descr_t *space;
++
++ if (sp->rx_ring != NULL) {
++ printk("%s: already done.\n", __FUNCTION__);
++ return 0;
++ }
++
++ size =
++ (sizeof(ar231x_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
++ space = kmalloc(size, GFP_KERNEL);
++ if (space == NULL)
++ return 1;
++
++ /* invalidate caches */
++ dma_cache_inv((unsigned int) space, size);
++
++ /* now convert pointer to KSEG1 */
++ space = (ar231x_descr_t *) KSEG1ADDR(space);
++
++ memset((void *) space, 0, size);
++
++ sp->rx_ring = space;
++ space += AR2313_DESCR_ENTRIES;
++
++ sp->tx_ring = space;
++ space += AR2313_DESCR_ENTRIES;
++
++ /* Initialize the transmit Descriptors */
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ ar231x_descr_t *td = &sp->tx_ring[j];
++ td->status = 0;
++ td->devcs = DMA_TX1_CHAINED;
++ td->addr = 0;
++ td->descr =
++ virt_to_phys(&sp->
++ tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]);
++ }
++
++ return 0;
++}
++
++
++/*
++ * Generic cleanup handling data allocated during init. Used when the
++ * module is unloaded or if an error occurs during initialization
++ */
++static void ar231x_init_cleanup(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ struct sk_buff *skb;
++ int j;
++
++ ar231x_free_descriptors(dev);
++
++ if (sp->eth_regs)
++ iounmap((void *) sp->eth_regs);
++ if (sp->dma_regs)
++ iounmap((void *) sp->dma_regs);
++
++ if (sp->rx_skb) {
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ skb = sp->rx_skb[j];
++ if (skb) {
++ sp->rx_skb[j] = NULL;
++ dev_kfree_skb(skb);
++ }
++ }
++ kfree(sp->rx_skb);
++ sp->rx_skb = NULL;
++ }
++
++ if (sp->tx_skb) {
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ skb = sp->tx_skb[j];
++ if (skb) {
++ sp->tx_skb[j] = NULL;
++ dev_kfree_skb(skb);
++ }
++ }
++ kfree(sp->tx_skb);
++ sp->tx_skb = NULL;
++ }
++}
++
++static int ar231x_setup_timer(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ init_timer(&sp->link_timer);
++
++ sp->link_timer.function = ar231x_link_timer_fn;
++ sp->link_timer.data = (int) dev;
++ sp->link_timer.expires = jiffies + HZ;
++
++ add_timer(&sp->link_timer);
++ return 0;
++
++}
++
++static void ar231x_link_timer_fn(unsigned long data)
++{
++ struct net_device *dev = (struct net_device *) data;
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ // see if the link status changed
++ // This was needed to make sure we set the PHY to the
++ // autonegotiated value of half or full duplex.
++ ar231x_check_link(dev);
++
++ // Loop faster when we don't have link.
++ // This was needed to speed up the AP bootstrap time.
++ if (sp->link == 0) {
++ mod_timer(&sp->link_timer, jiffies + HZ / 2);
++ } else {
++ mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
++ }
++}
++
++static void ar231x_check_link(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ u16 phyData;
++
++ phyData = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR);
++ if (sp->phyData != phyData) {
++ if (phyData & BMSR_LSTATUS) {
++ /* link is present, ready link partner ability to deterine
++ duplexity */
++ int duplex = 0;
++ u16 reg;
++
++ sp->link = 1;
++ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMCR);
++ if (reg & BMCR_ANENABLE) {
++ /* auto neg enabled */
++ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_LPA);
++ duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
++ } else {
++ /* no auto neg, just read duplex config */
++ duplex = (reg & BMCR_FULLDPLX) ? 1 : 0;
++ }
++
++ printk(KERN_INFO "%s: Configuring MAC for %s duplex\n",
++ dev->name, (duplex) ? "full" : "half");
++
++ if (duplex) {
++ /* full duplex */
++ sp->eth_regs->mac_control =
++ ((sp->eth_regs->
++ mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO);
++ } else {
++ /* half duplex */
++ sp->eth_regs->mac_control =
++ ((sp->eth_regs->
++ mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F);
++ }
++ } else {
++ /* no link */
++ sp->link = 0;
++ }
++ sp->phyData = phyData;
++ }
++}
++
++static int ar231x_reset_reg(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned int ethsal, ethsah;
++ unsigned int flags;
++
++ *sp->int_regs |= sp->cfg->reset_mac;
++ mdelay(10);
++ *sp->int_regs &= ~sp->cfg->reset_mac;
++ mdelay(10);
++ *sp->int_regs |= sp->cfg->reset_phy;
++ mdelay(10);
++ *sp->int_regs &= ~sp->cfg->reset_phy;
++ mdelay(10);
++
++ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
++ mdelay(10);
++ sp->dma_regs->bus_mode =
++ ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
++
++ /* enable interrupts */
++ sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
++ DMA_STATUS_NIS |
++ DMA_STATUS_RI |
++ DMA_STATUS_TI | DMA_STATUS_FBE);
++ sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring);
++ sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring);
++ sp->dma_regs->control =
++ (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
++
++ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
++ sp->eth_regs->vlan_tag = (0x8100);
++
++ /* Enable Ethernet Interface */
++ flags = (MAC_CONTROL_TE | /* transmit enable */
++ MAC_CONTROL_PM | /* pass mcast */
++ MAC_CONTROL_F | /* full duplex */
++ MAC_CONTROL_HBD); /* heart beat disabled */
++
++ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
++ flags |= MAC_CONTROL_PR;
++ }
++ sp->eth_regs->mac_control = flags;
++
++ /* Set all Ethernet station address registers to their initial values */
++ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
++ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
++
++ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
++ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
++ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
++ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
++
++ sp->eth_regs->mac_addr[0] = ethsah;
++ sp->eth_regs->mac_addr[1] = ethsal;
++
++ mdelay(10);
++
++ return (0);
++}
++
++
++static int ar231x_init(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ int ecode = 0;
++
++ /*
++ * Allocate descriptors
++ */
++ if (ar231x_allocate_descriptors(dev)) {
++ printk("%s: %s: ar231x_allocate_descriptors failed\n",
++ dev->name, __FUNCTION__);
++ ecode = -EAGAIN;
++ goto init_error;
++ }
++
++ /*
++ * Get the memory for the skb rings.
++ */
++ if (sp->rx_skb == NULL) {
++ sp->rx_skb =
++ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
++ GFP_KERNEL);
++ if (!(sp->rx_skb)) {
++ printk("%s: %s: rx_skb kmalloc failed\n",
++ dev->name, __FUNCTION__);
++ ecode = -EAGAIN;
++ goto init_error;
++ }
++ }
++ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
++
++ if (sp->tx_skb == NULL) {
++ sp->tx_skb =
++ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
++ GFP_KERNEL);
++ if (!(sp->tx_skb)) {
++ printk("%s: %s: tx_skb kmalloc failed\n",
++ dev->name, __FUNCTION__);
++ ecode = -EAGAIN;
++ goto init_error;
++ }
++ }
++ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
++
++ /*
++ * Set tx_csm before we start receiving interrupts, otherwise
++ * the interrupt handler might think it is supposed to process
++ * tx ints before we are up and running, which may cause a null
++ * pointer access in the int handler.
++ */
++ sp->rx_skbprd = 0;
++ sp->cur_rx = 0;
++ sp->tx_prd = 0;
++ sp->tx_csm = 0;
++
++ /*
++ * Zero the stats before starting the interface
++ */
++ memset(&dev->stats, 0, sizeof(dev->stats));
++
++ /*
++ * We load the ring here as there seem to be no way to tell the
++ * firmware to wipe the ring without re-initializing it.
++ */
++ ar231x_load_rx_ring(dev, RX_RING_SIZE);
++
++ /*
++ * Init hardware
++ */
++ ar231x_reset_reg(dev);
++
++ /*
++ * Get the IRQ
++ */
++ ecode =
++ request_irq(dev->irq, &ar231x_interrupt,
++ IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
++ dev->name, dev);
++ if (ecode) {
++ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
++ dev->name, __FUNCTION__, dev->irq);
++ goto init_error;
++ }
++
++
++ tasklet_enable(&sp->rx_tasklet);
++
++ return 0;
++
++ init_error:
++ ar231x_init_cleanup(dev);
++ return ecode;
++}
++
++/*
++ * Load the rx ring.
++ *
++ * Loading rings is safe without holding the spin lock since this is
++ * done only before the device is enabled, thus no interrupts are
++ * generated and by the interrupt handler/tasklet handler.
++ */
++static void ar231x_load_rx_ring(struct net_device *dev, int nr_bufs)
++{
++
++ struct ar231x_private *sp = netdev_priv(dev);
++ short i, idx;
++
++ idx = sp->rx_skbprd;
++
++ for (i = 0; i < nr_bufs; i++) {
++ struct sk_buff *skb;
++ ar231x_descr_t *rd;
++
++ if (sp->rx_skb[idx])
++ break;
++
++ skb = netdev_alloc_skb(dev, AR2313_BUFSIZE);
++ if (!skb) {
++ printk("\n\n\n\n %s: No memory in system\n\n\n\n",
++ __FUNCTION__);
++ break;
++ }
++
++ /*
++ * Make sure IP header starts on a fresh cache line.
++ */
++ skb->dev = dev;
++ skb_reserve(skb, RX_OFFSET);
++ sp->rx_skb[idx] = skb;
++
++ rd = (ar231x_descr_t *) & sp->rx_ring[idx];
++
++ /* initialize dma descriptor */
++ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
++ DMA_RX1_CHAINED);
++ rd->addr = virt_to_phys(skb->data);
++ rd->descr =
++ virt_to_phys(&sp->
++ rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]);
++ rd->status = DMA_RX_OWN;
++
++ idx = DSC_NEXT(idx);
++ }
++
++ if (i)
++ sp->rx_skbprd = idx;
++
++ return;
++}
++
++#define AR2313_MAX_PKTS_PER_CALL 64
++
++static int ar231x_rx_int(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ struct sk_buff *skb, *skb_new;
++ ar231x_descr_t *rxdesc;
++ unsigned int status;
++ u32 idx;
++ int pkts = 0;
++ int rval;
++
++ idx = sp->cur_rx;
++
++ /* process at most the entire ring and then wait for another interrupt
++ */
++ while (1) {
++
++ rxdesc = &sp->rx_ring[idx];
++ status = rxdesc->status;
++ if (status & DMA_RX_OWN) {
++ /* SiByte owns descriptor or descr not yet filled in */
++ rval = 0;
++ break;
++ }
++
++ if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
++ rval = 1;
++ break;
++ }
++
++ if ((status & DMA_RX_ERROR) && !(status & DMA_RX_LONG)) {
++ dev->stats.rx_errors++;
++ dev->stats.rx_dropped++;
++
++ /* add statistics counters */
++ if (status & DMA_RX_ERR_CRC)
++ dev->stats.rx_crc_errors++;
++ if (status & DMA_RX_ERR_COL)
++ dev->stats.rx_over_errors++;
++ if (status & DMA_RX_ERR_LENGTH)
++ dev->stats.rx_length_errors++;
++ if (status & DMA_RX_ERR_RUNT)
++ dev->stats.rx_over_errors++;
++ if (status & DMA_RX_ERR_DESC)
++ dev->stats.rx_over_errors++;
++
++ } else {
++ /* alloc new buffer. */
++ skb_new = netdev_alloc_skb(dev, AR2313_BUFSIZE + RX_OFFSET);
++ if (skb_new != NULL) {
++
++ skb = sp->rx_skb[idx];
++ /* set skb */
++ skb_put(skb,
++ ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
++
++ dev->stats.rx_bytes += skb->len;
++ skb->protocol = eth_type_trans(skb, dev);
++ /* pass the packet to upper layers */
++ netif_rx(skb);
++
++ skb_new->dev = dev;
++ /* 16 bit align */
++ skb_reserve(skb_new, RX_OFFSET);
++ /* reset descriptor's curr_addr */
++ rxdesc->addr = virt_to_phys(skb_new->data);
++
++ dev->stats.rx_packets++;
++ sp->rx_skb[idx] = skb_new;
++ } else {
++ dev->stats.rx_dropped++;
++ }
++ }
++
++ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
++ DMA_RX1_CHAINED);
++ rxdesc->status = DMA_RX_OWN;
++
++ idx = DSC_NEXT(idx);
++ }
++
++ sp->cur_rx = idx;
++
++ return rval;
++}
++
++
++static void ar231x_tx_int(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ u32 idx;
++ struct sk_buff *skb;
++ ar231x_descr_t *txdesc;
++ unsigned int status = 0;
++
++ idx = sp->tx_csm;
++
++ while (idx != sp->tx_prd) {
++ txdesc = &sp->tx_ring[idx];
++
++ if ((status = txdesc->status) & DMA_TX_OWN) {
++ /* ar231x dma still owns descr */
++ break;
++ }
++ /* done with this descriptor */
++ dma_unmap_single(NULL, txdesc->addr,
++ txdesc->devcs & DMA_TX1_BSIZE_MASK,
++ DMA_TO_DEVICE);
++ txdesc->status = 0;
++
++ if (status & DMA_TX_ERROR) {
++ dev->stats.tx_errors++;
++ dev->stats.tx_dropped++;
++ if (status & DMA_TX_ERR_UNDER)
++ dev->stats.tx_fifo_errors++;
++ if (status & DMA_TX_ERR_HB)
++ dev->stats.tx_heartbeat_errors++;
++ if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK))
++ dev->stats.tx_carrier_errors++;
++ if (status & (DMA_TX_ERR_LATE |
++ DMA_TX_ERR_COL |
++ DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER))
++ dev->stats.tx_aborted_errors++;
++ } else {
++ /* transmit OK */
++ dev->stats.tx_packets++;
++ }
++
++ skb = sp->tx_skb[idx];
++ sp->tx_skb[idx] = NULL;
++ idx = DSC_NEXT(idx);
++ dev->stats.tx_bytes += skb->len;
++ dev_kfree_skb_irq(skb);
++ }
++
++ sp->tx_csm = idx;
++
++ return;
++}
++
++
++static void rx_tasklet_func(unsigned long data)
++{
++ struct net_device *dev = (struct net_device *) data;
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ if (sp->unloading) {
++ return;
++ }
++
++ if (ar231x_rx_int(dev)) {
++ tasklet_hi_schedule(&sp->rx_tasklet);
++ } else {
++ unsigned long flags;
++ spin_lock_irqsave(&sp->lock, flags);
++ sp->dma_regs->intr_ena |= DMA_STATUS_RI;
++ spin_unlock_irqrestore(&sp->lock, flags);
++ }
++}
++
++static void rx_schedule(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
++
++ tasklet_hi_schedule(&sp->rx_tasklet);
++}
++
++static irqreturn_t ar231x_interrupt(int irq, void *dev_id)
++{
++ struct net_device *dev = (struct net_device *) dev_id;
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned int status, enabled;
++
++ /* clear interrupt */
++ /*
++ * Don't clear RI bit if currently disabled.
++ */
++ status = sp->dma_regs->status;
++ enabled = sp->dma_regs->intr_ena;
++ sp->dma_regs->status = status & enabled;
++
++ if (status & DMA_STATUS_NIS) {
++ /* normal status */
++ /*
++ * Don't schedule rx processing if interrupt
++ * is already disabled.
++ */
++ if (status & enabled & DMA_STATUS_RI) {
++ /* receive interrupt */
++ rx_schedule(dev);
++ }
++ if (status & DMA_STATUS_TI) {
++ /* transmit interrupt */
++ ar231x_tx_int(dev);
++ }
++ }
++
++ /* abnormal status */
++ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
++ ar231x_restart(dev);
++ }
++ return IRQ_HANDLED;
++}
++
++
++static int ar231x_open(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned int ethsal, ethsah;
++
++ /* reset the hardware, in case the MAC address changed */
++ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
++ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
++
++ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
++ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
++ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
++ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
++
++ sp->eth_regs->mac_addr[0] = ethsah;
++ sp->eth_regs->mac_addr[1] = ethsal;
++
++ mdelay(10);
++
++ dev->mtu = 1500;
++ netif_start_queue(dev);
++
++ sp->eth_regs->mac_control |= MAC_CONTROL_RE;
++
++ return 0;
++}
++
++static void ar231x_tx_timeout(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned long flags;
++
++ spin_lock_irqsave(&sp->lock, flags);
++ ar231x_restart(dev);
++ spin_unlock_irqrestore(&sp->lock, flags);
++}
++
++static void ar231x_halt(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ int j;
++
++ tasklet_disable(&sp->rx_tasklet);
++
++ /* kill the MAC */
++ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
++ MAC_CONTROL_TE); /* disable Transmits */
++ /* stop dma */
++ sp->dma_regs->control = 0;
++ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
++
++ /* place phy and MAC in reset */
++ *sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy);
++
++ /* free buffers on tx ring */
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ struct sk_buff *skb;
++ ar231x_descr_t *txdesc;
++
++ txdesc = &sp->tx_ring[j];
++ txdesc->descr = 0;
++
++ skb = sp->tx_skb[j];
++ if (skb) {
++ dev_kfree_skb(skb);
++ sp->tx_skb[j] = NULL;
++ }
++ }
++}
++
++/*
++ * close should do nothing. Here's why. It's called when
++ * 'ifconfig bond0 down' is run. If it calls free_irq then
++ * the irq is gone forever ! When bond0 is made 'up' again,
++ * the ar231x_open () does not call request_irq (). Worse,
++ * the call to ar231x_halt() generates a WDOG reset due to
++ * the write to 'sp->int_regs' and the box reboots.
++ * Commenting this out is good since it allows the
++ * system to resume when bond0 is made up again.
++ */
++static int ar231x_close(struct net_device *dev)
++{
++#if 0
++ /*
++ * Disable interrupts
++ */
++ disable_irq(dev->irq);
++
++ /*
++ * Without (or before) releasing irq and stopping hardware, this
++ * is an absolute non-sense, by the way. It will be reset instantly
++ * by the first irq.
++ */
++ netif_stop_queue(dev);
++
++ /* stop the MAC and DMA engines */
++ ar231x_halt(dev);
++
++ /* release the interrupt */
++ free_irq(dev->irq, dev);
++
++#endif
++ return 0;
++}
++
++static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ ar231x_descr_t *td;
++ u32 idx;
++
++ idx = sp->tx_prd;
++ td = &sp->tx_ring[idx];
++
++ if (td->status & DMA_TX_OWN) {
++ /* free skbuf and lie to the caller that we sent it out */
++ dev->stats.tx_dropped++;
++ dev_kfree_skb(skb);
++
++ /* restart transmitter in case locked */
++ sp->dma_regs->xmt_poll = 0;
++ return 0;
++ }
++
++ /* Setup the transmit descriptor. */
++ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
++ (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED));
++ td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
++ td->status = DMA_TX_OWN;
++
++ /* kick transmitter last */
++ sp->dma_regs->xmt_poll = 0;
++
++ sp->tx_skb[idx] = skb;
++ idx = DSC_NEXT(idx);
++ sp->tx_prd = idx;
++
++ return 0;
++}
++
++static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
++{
++ struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
++ struct ar231x_private *sp = netdev_priv(dev);
++ int ret;
++
++ switch (cmd) {
++
++ case SIOCETHTOOL:
++ spin_lock_irq(&sp->lock);
++ ret = phy_ethtool_ioctl(sp->phy_dev, (void *) ifr->ifr_data);
++ spin_unlock_irq(&sp->lock);
++ return ret;
++
++ case SIOCSIFHWADDR:
++ if (copy_from_user
++ (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
++ return -EFAULT;
++ return 0;
++
++ case SIOCGIFHWADDR:
++ if (copy_to_user
++ (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
++ return -EFAULT;
++ return 0;
++
++ case SIOCGMIIPHY:
++ case SIOCGMIIREG:
++ case SIOCSMIIREG:
++ return phy_mii_ioctl(sp->phy_dev, data, cmd);
++
++ default:
++ break;
++ }
++
++ return -EOPNOTSUPP;
++}
++
++static void ar231x_adjust_link(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned int mc;
++
++ if (!sp->phy_dev->link)
++ return;
++
++ if (sp->phy_dev->duplex != sp->oldduplex) {
++ mc = readl(&sp->eth_regs->mac_control);
++ mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO);
++ if (sp->phy_dev->duplex)
++ mc |= MAC_CONTROL_F;
++ else
++ mc |= MAC_CONTROL_DRO;
++ writel(mc, &sp->eth_regs->mac_control);
++ sp->oldduplex = sp->phy_dev->duplex;
++ }
++}
++
++#define MII_ADDR(phy, reg) \
++ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
++
++static int
++ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
++{
++ struct net_device *const dev = bus->priv;
++ struct ar231x_private *sp = netdev_priv(dev);
++ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
++
++ ethernet->mii_addr = MII_ADDR(phy_addr, regnum);
++ while (ethernet->mii_addr & MII_ADDR_BUSY);
++ return (ethernet->mii_data >> MII_DATA_SHIFT);
++}
++
++static int
++ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
++ u16 value)
++{
++ struct net_device *const dev = bus->priv;
++ struct ar231x_private *sp = netdev_priv(dev);
++ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
++
++ while (ethernet->mii_addr & MII_ADDR_BUSY);
++ ethernet->mii_data = value << MII_DATA_SHIFT;
++ ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE;
++
++ return 0;
++}
++
++static int ar231x_mdiobus_reset(struct mii_bus *bus)
++{
++ struct net_device *const dev = bus->priv;
++
++ ar231x_reset_reg(dev);
++
++ return 0;
++}
++
++static int ar231x_mdiobus_probe (struct net_device *dev)
++{
++ struct ar231x_private *const sp = netdev_priv(dev);
++ struct phy_device *phydev = NULL;
++ int phy_addr;
++
++ /* find the first (lowest address) PHY on the current MAC's MII bus */
++ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
++ if (sp->mii_bus->phy_map[phy_addr]) {
++ phydev = sp->mii_bus->phy_map[phy_addr];
++ sp->phy = phy_addr;
++ break; /* break out with first one found */
++ }
++
++ if (!phydev) {
++ printk (KERN_ERR "ar231x: %s: no PHY found\n", dev->name);
++ return -1;
++ }
++
++ /* now we are supposed to have a proper phydev, to attach to... */
++ BUG_ON(!phydev);
++ BUG_ON(phydev->attached_dev);
++
++ phydev = phy_connect(dev, dev_name(&phydev->dev), &ar231x_adjust_link, 0,
++ PHY_INTERFACE_MODE_MII);
++
++ if (IS_ERR(phydev)) {
++ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
++ return PTR_ERR(phydev);
++ }
++
++ /* mask with MAC supported features */
++ phydev->supported &= (SUPPORTED_10baseT_Half
++ | SUPPORTED_10baseT_Full
++ | SUPPORTED_100baseT_Half
++ | SUPPORTED_100baseT_Full
++ | SUPPORTED_Autoneg
++ /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
++ | SUPPORTED_MII
++ | SUPPORTED_TP);
++
++ phydev->advertising = phydev->supported;
++
++ sp->oldduplex = -1;
++ sp->phy_dev = phydev;
++
++ printk(KERN_INFO "%s: attached PHY driver [%s] "
++ "(mii_bus:phy_addr=%s)\n",
++ dev->name, phydev->drv->name, dev_name(&phydev->dev));
++
++ return 0;
++}
++
+diff -Nur linux-2.6.39-rc7.orig/drivers/net/ar231x.h linux-2.6.39-rc7/drivers/net/ar231x.h
+--- linux-2.6.39-rc7.orig/drivers/net/ar231x.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/drivers/net/ar231x.h 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,302 @@
++/*
++ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device.
++ *
++ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++ *
++ * Thanks to Atheros for providing hardware and documentation
++ * enabling me to write this driver.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef _AR2313_H_
++#define _AR2313_H_
++
++#include <generated/autoconf.h>
++#include <linux/bitops.h>
++#include <asm/bootinfo.h>
++#include <ar231x_platform.h>
++
++/*
++ * probe link timer - 5 secs
++ */
++#define LINK_TIMER (5*HZ)
++
++#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
++#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0)
++#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0)
++
++#define AR2313_TX_TIMEOUT (HZ/4)
++
++/*
++ * Rings
++ */
++#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
++#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
++
++#define AR2313_MBGET 2
++#define AR2313_MBSET 3
++#define AR2313_PCI_RECONFIG 4
++#define AR2313_PCI_DUMP 5
++#define AR2313_TEST_PANIC 6
++#define AR2313_TEST_NULLPTR 7
++#define AR2313_READ_DATA 8
++#define AR2313_WRITE_DATA 9
++#define AR2313_GET_VERSION 10
++#define AR2313_TEST_HANG 11
++#define AR2313_SYNC 12
++
++#define DMA_RX_ERR_CRC BIT(1)
++#define DMA_RX_ERR_DRIB BIT(2)
++#define DMA_RX_ERR_MII BIT(3)
++#define DMA_RX_EV2 BIT(5)
++#define DMA_RX_ERR_COL BIT(6)
++#define DMA_RX_LONG BIT(7)
++#define DMA_RX_LS BIT(8) /* last descriptor */
++#define DMA_RX_FS BIT(9) /* first descriptor */
++#define DMA_RX_MF BIT(10) /* multicast frame */
++#define DMA_RX_ERR_RUNT BIT(11) /* runt frame */
++#define DMA_RX_ERR_LENGTH BIT(12) /* length error */
++#define DMA_RX_ERR_DESC BIT(14) /* descriptor error */
++#define DMA_RX_ERROR BIT(15) /* error summary */
++#define DMA_RX_LEN_MASK 0x3fff0000
++#define DMA_RX_LEN_SHIFT 16
++#define DMA_RX_FILT BIT(30)
++#define DMA_RX_OWN BIT(31) /* desc owned by DMA controller */
++
++#define DMA_RX1_BSIZE_MASK 0x000007ff
++#define DMA_RX1_BSIZE_SHIFT 0
++#define DMA_RX1_CHAINED BIT(24)
++#define DMA_RX1_RER BIT(25)
++
++#define DMA_TX_ERR_UNDER BIT(1) /* underflow error */
++#define DMA_TX_ERR_DEFER BIT(2) /* excessive deferral */
++#define DMA_TX_COL_MASK 0x78
++#define DMA_TX_COL_SHIFT 3
++#define DMA_TX_ERR_HB BIT(7) /* hearbeat failure */
++#define DMA_TX_ERR_COL BIT(8) /* excessive collisions */
++#define DMA_TX_ERR_LATE BIT(9) /* late collision */
++#define DMA_TX_ERR_LINK BIT(10) /* no carrier */
++#define DMA_TX_ERR_LOSS BIT(11) /* loss of carrier */
++#define DMA_TX_ERR_JABBER BIT(14) /* transmit jabber timeout */
++#define DMA_TX_ERROR BIT(15) /* frame aborted */
++#define DMA_TX_OWN BIT(31) /* descr owned by DMA controller */
++
++#define DMA_TX1_BSIZE_MASK 0x000007ff
++#define DMA_TX1_BSIZE_SHIFT 0
++#define DMA_TX1_CHAINED BIT(24) /* chained descriptors */
++#define DMA_TX1_TER BIT(25) /* transmit end of ring */
++#define DMA_TX1_FS BIT(29) /* first segment */
++#define DMA_TX1_LS BIT(30) /* last segment */
++#define DMA_TX1_IC BIT(31) /* interrupt on completion */
++
++#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */
++
++#define MAC_CONTROL_RE BIT(2) /* receive enable */
++#define MAC_CONTROL_TE BIT(3) /* transmit enable */
++#define MAC_CONTROL_DC BIT(5) /* Deferral check */
++#define MAC_CONTROL_ASTP BIT(8) /* Auto pad strip */
++#define MAC_CONTROL_DRTY BIT(10) /* Disable retry */
++#define MAC_CONTROL_DBF BIT(11) /* Disable bcast frames */
++#define MAC_CONTROL_LCC BIT(12) /* late collision ctrl */
++#define MAC_CONTROL_HP BIT(13) /* Hash Perfect filtering */
++#define MAC_CONTROL_HASH BIT(14) /* Unicast hash filtering */
++#define MAC_CONTROL_HO BIT(15) /* Hash only filtering */
++#define MAC_CONTROL_PB BIT(16) /* Pass Bad frames */
++#define MAC_CONTROL_IF BIT(17) /* Inverse filtering */
++#define MAC_CONTROL_PR BIT(18) /* promiscuous mode (valid frames only) */
++#define MAC_CONTROL_PM BIT(19) /* pass multicast */
++#define MAC_CONTROL_F BIT(20) /* full-duplex */
++#define MAC_CONTROL_DRO BIT(23) /* Disable Receive Own */
++#define MAC_CONTROL_HBD BIT(28) /* heart-beat disabled (MUST BE SET) */
++#define MAC_CONTROL_BLE BIT(30) /* big endian mode */
++#define MAC_CONTROL_RA BIT(31) /* receive all (valid and invalid frames) */
++
++#define MII_ADDR_BUSY BIT(0)
++#define MII_ADDR_WRITE BIT(1)
++#define MII_ADDR_REG_SHIFT 6
++#define MII_ADDR_PHY_SHIFT 11
++#define MII_DATA_SHIFT 0
++
++#define FLOW_CONTROL_FCE BIT(1)
++
++#define DMA_BUS_MODE_SWR BIT(0) /* software reset */
++#define DMA_BUS_MODE_BLE BIT(7) /* big endian mode */
++#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
++#define DMA_BUS_MODE_DBO BIT(20) /* big-endian descriptors */
++
++#define DMA_STATUS_TI BIT(0) /* transmit interrupt */
++#define DMA_STATUS_TPS BIT(1) /* transmit process stopped */
++#define DMA_STATUS_TU BIT(2) /* transmit buffer unavailable */
++#define DMA_STATUS_TJT BIT(3) /* transmit buffer timeout */
++#define DMA_STATUS_UNF BIT(5) /* transmit underflow */
++#define DMA_STATUS_RI BIT(6) /* receive interrupt */
++#define DMA_STATUS_RU BIT(7) /* receive buffer unavailable */
++#define DMA_STATUS_RPS BIT(8) /* receive process stopped */
++#define DMA_STATUS_ETI BIT(10) /* early transmit interrupt */
++#define DMA_STATUS_FBE BIT(13) /* fatal bus interrupt */
++#define DMA_STATUS_ERI BIT(14) /* early receive interrupt */
++#define DMA_STATUS_AIS BIT(15) /* abnormal interrupt summary */
++#define DMA_STATUS_NIS BIT(16) /* normal interrupt summary */
++#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
++#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
++#define DMA_STATUS_EB_SHIFT 23 /* error bits */
++
++#define DMA_CONTROL_SR BIT(1) /* start receive */
++#define DMA_CONTROL_ST BIT(13) /* start transmit */
++#define DMA_CONTROL_SF BIT(21) /* store and forward */
++
++
++typedef struct {
++ volatile unsigned int status; // OWN, Device control and status.
++ volatile unsigned int devcs; // pkt Control bits + Length
++ volatile unsigned int addr; // Current Address.
++ volatile unsigned int descr; // Next descriptor in chain.
++} ar231x_descr_t;
++
++
++
++//
++// New Combo structure for Both Eth0 AND eth1
++//
++typedef struct {
++ volatile unsigned int mac_control; /* 0x00 */
++ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */
++ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
++ volatile unsigned int mii_addr; /* 0x14 */
++ volatile unsigned int mii_data; /* 0x18 */
++ volatile unsigned int flow_control; /* 0x1c */
++ volatile unsigned int vlan_tag; /* 0x20 */
++ volatile unsigned int pad[7]; /* 0x24 - 0x3c */
++ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
++
++} ETHERNET_STRUCT;
++
++/********************************************************************
++ * Interrupt controller
++ ********************************************************************/
++
++typedef struct {
++ volatile unsigned int wdog_control; /* 0x08 */
++ volatile unsigned int wdog_timer; /* 0x0c */
++ volatile unsigned int misc_status; /* 0x10 */
++ volatile unsigned int misc_mask; /* 0x14 */
++ volatile unsigned int global_status; /* 0x18 */
++ volatile unsigned int reserved; /* 0x1c */
++ volatile unsigned int reset_control; /* 0x20 */
++} INTERRUPT;
++
++/********************************************************************
++ * DMA controller
++ ********************************************************************/
++typedef struct {
++ volatile unsigned int bus_mode; /* 0x00 (CSR0) */
++ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
++ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
++ volatile unsigned int rcv_base; /* 0x0c (CSR3) */
++ volatile unsigned int xmt_base; /* 0x10 (CSR4) */
++ volatile unsigned int status; /* 0x14 (CSR5) */
++ volatile unsigned int control; /* 0x18 (CSR6) */
++ volatile unsigned int intr_ena; /* 0x1c (CSR7) */
++ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */
++ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */
++ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
++ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
++} DMA;
++
++/*
++ * Struct private for the Sibyte.
++ *
++ * Elements are grouped so variables used by the tx handling goes
++ * together, and will go into the same cache lines etc. in order to
++ * avoid cache line contention between the rx and tx handling on SMP.
++ *
++ * Frequently accessed variables are put at the beginning of the
++ * struct to help the compiler generate better/shorter code.
++ */
++struct ar231x_private {
++ struct net_device *dev;
++ int version;
++ u32 mb[2];
++
++ volatile ETHERNET_STRUCT *phy_regs;
++ volatile ETHERNET_STRUCT *eth_regs;
++ volatile DMA *dma_regs;
++ volatile u32 *int_regs;
++ struct ar231x_eth *cfg;
++
++ spinlock_t lock; /* Serialise access to device */
++
++ /*
++ * RX and TX descriptors, must be adjacent
++ */
++ ar231x_descr_t *rx_ring;
++ ar231x_descr_t *tx_ring;
++
++
++ struct sk_buff **rx_skb;
++ struct sk_buff **tx_skb;
++
++ /*
++ * RX elements
++ */
++ u32 rx_skbprd;
++ u32 cur_rx;
++
++ /*
++ * TX elements
++ */
++ u32 tx_prd;
++ u32 tx_csm;
++
++ /*
++ * Misc elements
++ */
++ char name[48];
++ struct {
++ u32 address;
++ u32 length;
++ char *mapping;
++ } desc;
++
++
++ struct timer_list link_timer;
++ unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */
++ unsigned short mac;
++ unsigned short link; /* 0 - link down, 1 - link up */
++ u16 phyData;
++
++ struct tasklet_struct rx_tasklet;
++ int unloading;
++
++ struct phy_device *phy_dev;
++ struct mii_bus *mii_bus;
++ int oldduplex;
++};
++
++
++/*
++ * Prototypes
++ */
++static int ar231x_init(struct net_device *dev);
++#ifdef TX_TIMEOUT
++static void ar231x_tx_timeout(struct net_device *dev);
++#endif
++static int ar231x_restart(struct net_device *dev);
++static void ar231x_load_rx_ring(struct net_device *dev, int bufs);
++static irqreturn_t ar231x_interrupt(int irq, void *dev_id);
++static int ar231x_open(struct net_device *dev);
++static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev);
++static int ar231x_close(struct net_device *dev);
++static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr,
++ int cmd);
++static void ar231x_init_cleanup(struct net_device *dev);
++static int ar231x_setup_timer(struct net_device *dev);
++static void ar231x_link_timer_fn(unsigned long data);
++static void ar231x_check_link(struct net_device *dev);
++#endif /* _AR2313_H_ */
+diff -Nur linux-2.6.39-rc7.orig/drivers/watchdog/Kconfig linux-2.6.39-rc7/drivers/watchdog/Kconfig
+--- linux-2.6.39-rc7.orig/drivers/watchdog/Kconfig 2011-05-10 04:33:54.000000000 +0200
++++ linux-2.6.39-rc7/drivers/watchdog/Kconfig 2011-05-15 21:34:57.000000000 +0200
+@@ -990,6 +990,12 @@
+ To compile this driver as a loadable module, choose M here.
+ The module will be called bcm63xx_wdt.
+
++config ATHEROS_WDT
++ tristate "Atheros wisoc Watchdog Timer"
++ depends on ATHEROS_AR231X
++ help
++ Hardware driver for the Atheros wisoc Watchdog Timer.
++
+ # PARISC Architecture
+
+ # POWERPC Architecture
+diff -Nur linux-2.6.39-rc7.orig/drivers/watchdog/Makefile linux-2.6.39-rc7/drivers/watchdog/Makefile
+--- linux-2.6.39-rc7.orig/drivers/watchdog/Makefile 2011-05-10 04:33:54.000000000 +0200
++++ linux-2.6.39-rc7/drivers/watchdog/Makefile 2011-05-15 21:34:57.000000000 +0200
+@@ -120,6 +120,7 @@
+ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
++obj-$(CONFIG_ATHEROS_WDT) += ar2315-wtd.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
+ octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
+diff -Nur linux-2.6.39-rc7.orig/drivers/watchdog/ar2315-wtd.c linux-2.6.39-rc7/drivers/watchdog/ar2315-wtd.c
+--- linux-2.6.39-rc7.orig/drivers/watchdog/ar2315-wtd.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.39-rc7/drivers/watchdog/ar2315-wtd.c 2011-05-15 21:34:57.000000000 +0200
+@@ -0,0 +1,200 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ * Copyright (C) 2008 John Crispin <blogic@openwrt.org>
++ * Based on EP93xx and ifxmips wdt driver
++ */
++
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/types.h>
++#include <linux/miscdevice.h>
++#include <linux/watchdog.h>
++#include <linux/fs.h>
++#include <linux/ioport.h>
++#include <linux/notifier.h>
++#include <linux/reboot.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++
++#include <asm/io.h>
++#include <asm/uaccess.h>
++#include <asm/system.h>
++#include <asm/addrspace.h>
++#include <ar231x_platform.h>
++#include <ar2315_regs.h>
++#include <ar231x.h>
++
++#define CLOCK_RATE 40000000
++#define HEARTBEAT(x) (x < 1 || x > 90)?(20):(x)
++
++static int wdt_timeout = 20;
++static int started = 0;
++static int in_use = 0;
++
++static void
++ar2315_wdt_enable(void)
++{
++ ar231x_write_reg(AR2315_WD, wdt_timeout * CLOCK_RATE);
++ ar231x_write_reg(AR2315_ISR, 0x80);
++}
++
++static ssize_t
++ar2315_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
++{
++ if(len)
++ ar2315_wdt_enable();
++ return len;
++}
++
++static int
++ar2315_wdt_open(struct inode *inode, struct file *file)
++{
++ if(in_use)
++ return -EBUSY;
++ ar2315_wdt_enable();
++ in_use = started = 1;
++ return nonseekable_open(inode, file);
++}
++
++static int
++ar2315_wdt_release(struct inode *inode, struct file *file)
++{
++ in_use = 0;
++ return 0;
++}
++
++static irqreturn_t
++ar2315_wdt_interrupt(int irq, void *dev_id)
++{
++ if(started)
++ {
++ printk(KERN_CRIT "watchdog expired, rebooting system\n");
++ emergency_restart();
++ } else {
++ ar231x_write_reg(AR2315_WDC, 0);
++ ar231x_write_reg(AR2315_WD, 0);
++ ar231x_write_reg(AR2315_ISR, 0x80);
++ }
++ return IRQ_HANDLED;
++}
++
++static struct watchdog_info ident = {
++ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
++ .identity = "ar2315 Watchdog",
++};
++
++static int
++ar2315_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
++{
++ int new_wdt_timeout;
++ int ret = -ENOIOCTLCMD;
++
++ switch(cmd)
++ {
++ case WDIOC_GETSUPPORT:
++ ret = copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)) ? -EFAULT : 0;
++ break;
++
++ case WDIOC_KEEPALIVE:
++ ar2315_wdt_enable();
++ ret = 0;
++ break;
++
++ case WDIOC_SETTIMEOUT:
++ if((ret = get_user(new_wdt_timeout, (int __user *)arg)))
++ break;
++ wdt_timeout = HEARTBEAT(new_wdt_timeout);
++ ar2315_wdt_enable();
++ break;
++
++ case WDIOC_GETTIMEOUT:
++ ret = put_user(wdt_timeout, (int __user *)arg);
++ break;
++ }
++ return ret;
++}
++
++static struct file_operations ar2315_wdt_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .write = ar2315_wdt_write,
++ .unlocked_ioctl = ar2315_wdt_ioctl,
++ .open = ar2315_wdt_open,
++ .release = ar2315_wdt_release,
++};
++
++static struct miscdevice ar2315_wdt_miscdev = {
++ .minor = WATCHDOG_MINOR,
++ .name = "watchdog",
++ .fops = &ar2315_wdt_fops,
++};
++
++static int
++ar2315_wdt_probe(struct platform_device *dev)
++{
++ int ret = 0;
++
++ ar2315_wdt_enable();
++ ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, IRQF_DISABLED, "ar2315_wdt", NULL);
++ if(ret)
++ {
++ printk(KERN_ERR "ar2315wdt: failed to register inetrrupt\n");
++ goto out;
++ }
++
++ ret = misc_register(&ar2315_wdt_miscdev);
++ if(ret)
++ printk(KERN_ERR "ar2315wdt: failed to register miscdev\n");
++
++out:
++ return ret;
++}
++
++static int
++ar2315_wdt_remove(struct platform_device *dev)
++{
++ misc_deregister(&ar2315_wdt_miscdev);
++ free_irq(AR531X_MISC_IRQ_WATCHDOG, NULL);
++ return 0;
++}
++
++static struct platform_driver ar2315_wdt_driver = {
++ .probe = ar2315_wdt_probe,
++ .remove = ar2315_wdt_remove,
++ .driver = {
++ .name = "ar2315_wdt",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init
++init_ar2315_wdt(void)
++{
++ int ret = platform_driver_register(&ar2315_wdt_driver);
++ if(ret)
++ printk(KERN_INFO "ar2315_wdt: error registering platfom driver!");
++ return ret;
++}
++
++static void __exit
++exit_ar2315_wdt(void)
++{
++ platform_driver_unregister(&ar2315_wdt_driver);
++}
++
++module_init(init_ar2315_wdt);
++module_exit(exit_ar2315_wdt);
diff --git a/target/linux/patches/3.0.4/gemalto.patch b/target/linux/patches/3.0.4/gemalto.patch
new file mode 100644
index 000000000..f3c223b5e
--- /dev/null
+++ b/target/linux/patches/3.0.4/gemalto.patch
@@ -0,0 +1,11 @@
+diff -Nur linux-2.6.36.orig/drivers/tty/serial/serial_cs.c linux-2.6.36/drivers/serial/serial_cs.c
+--- linux-2.6.36.orig/drivers/tty/serial/serial_cs.c 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/drivers/tty/serial/serial_cs.c 2010-12-13 23:03:40.000000000 +0100
+@@ -794,6 +794,7 @@
+ PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
+ PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
+ PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
++ PCMCIA_DEVICE_MANF_CARD(0x0157, 0x0100), /* Gemalto SCR */
+ PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */
+ PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */
+ PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
diff --git a/target/linux/patches/3.0.4/mips-malta.patch b/target/linux/patches/3.0.4/mips-malta.patch
new file mode 100644
index 000000000..cc8789dca
--- /dev/null
+++ b/target/linux/patches/3.0.4/mips-malta.patch
@@ -0,0 +1,135 @@
+http://lkml.indiana.edu/hypermail/linux/kernel/1105.3/02199.html
+
+diff -Nur linux-2.6.39.orig/arch/mips/include/asm/smp-ops.h linux-2.6.39/arch/mips/include/asm/smp-ops.h
+--- linux-2.6.39.orig/arch/mips/include/asm/smp-ops.h 2011-05-19 06:06:34.000000000 +0200
++++ linux-2.6.39/arch/mips/include/asm/smp-ops.h 2011-08-29 04:39:03.360480881 +0200
+@@ -56,8 +56,43 @@
+
+ #endif /* !CONFIG_SMP */
+
+-extern struct plat_smp_ops up_smp_ops;
+-extern struct plat_smp_ops cmp_smp_ops;
+-extern struct plat_smp_ops vsmp_smp_ops;
++static inline int register_up_smp_ops(void)
++{
++#ifdef CONFIG_SMP_UP
++ extern struct plat_smp_ops up_smp_ops;
++
++ register_smp_ops(&up_smp_ops);
++
++ return 0;
++#else
++ return -ENODEV;
++#endif
++}
++
++static inline int register_cmp_smp_ops(void)
++{
++#ifdef CONFIG_MIPS_CMP
++ extern struct plat_smp_ops cmp_smp_ops;
++
++ register_smp_ops(&cmp_smp_ops);
++
++ return 0;
++#else
++ return -ENODEV;
++#endif
++}
++
++static inline int register_vsmp_smp_ops(void)
++{
++#ifdef CONFIG_MIPS_MT_SMP
++ extern struct plat_smp_ops vsmp_smp_ops;
++
++ register_smp_ops(&vsmp_smp_ops);
++
++ return 0;
++#else
++ return -ENODEV;
++#endif
++}
+
+ #endif /* __ASM_SMP_OPS_H */
+diff -Nur linux-2.6.39.orig/arch/mips/mipssim/sim_setup.c linux-2.6.39/arch/mips/mipssim/sim_setup.c
+--- linux-2.6.39.orig/arch/mips/mipssim/sim_setup.c 2011-05-19 06:06:34.000000000 +0200
++++ linux-2.6.39/arch/mips/mipssim/sim_setup.c 2011-08-29 04:39:03.390480572 +0200
+@@ -59,18 +59,17 @@
+
+ prom_meminit();
+
+-#ifdef CONFIG_MIPS_MT_SMP
+- if (cpu_has_mipsmt)
+- register_smp_ops(&vsmp_smp_ops);
+- else
+- register_smp_ops(&up_smp_ops);
+-#endif
++ if (cpu_has_mipsmt) {
++ if (!register_vsmp_smp_ops())
++ return;
++
+ #ifdef CONFIG_MIPS_MT_SMTC
+- if (cpu_has_mipsmt)
+ register_smp_ops(&ssmtc_smp_ops);
+- else
+- register_smp_ops(&up_smp_ops);
++ return;
+ #endif
++ }
++
++ register_up_smp_ops();
+ }
+
+ static void __init serial_init(void)
+diff -Nur linux-2.6.39.orig/arch/mips/mti-malta/malta-init.c linux-2.6.39/arch/mips/mti-malta/malta-init.c
+--- linux-2.6.39.orig/arch/mips/mti-malta/malta-init.c 2011-05-19 06:06:34.000000000 +0200
++++ linux-2.6.39/arch/mips/mti-malta/malta-init.c 2011-08-29 04:39:03.700480601 +0200
+@@ -29,6 +29,7 @@
+ #include <asm/system.h>
+ #include <asm/cacheflush.h>
+ #include <asm/traps.h>
++#include <asm/smp-ops.h>
+
+ #include <asm/gcmpregs.h>
+ #include <asm/mips-boards/prom.h>
+@@ -358,15 +359,14 @@
+ #ifdef CONFIG_SERIAL_8250_CONSOLE
+ console_config();
+ #endif
+-#ifdef CONFIG_MIPS_CMP
+ /* Early detection of CMP support */
+ if (gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ))
+- register_smp_ops(&cmp_smp_ops);
+- else
+-#endif
+-#ifdef CONFIG_MIPS_MT_SMP
+- register_smp_ops(&vsmp_smp_ops);
+-#endif
++ if (!register_cmp_smp_ops())
++ return;
++
++ if (!register_vsmp_smp_ops())
++ return;
++
+ #ifdef CONFIG_MIPS_MT_SMTC
+ register_smp_ops(&msmtc_smp_ops);
+ #endif
+diff -Nur linux-2.6.39.orig/arch/mips/pmc-sierra/msp71xx/msp_setup.c linux-2.6.39/arch/mips/pmc-sierra/msp71xx/msp_setup.c
+--- linux-2.6.39.orig/arch/mips/pmc-sierra/msp71xx/msp_setup.c 2011-05-19 06:06:34.000000000 +0200
++++ linux-2.6.39/arch/mips/pmc-sierra/msp71xx/msp_setup.c 2011-08-29 04:39:03.790480302 +0200
+@@ -228,13 +228,11 @@
+ */
+ msp_serial_setup();
+
+-#ifdef CONFIG_MIPS_MT_SMP
+- register_smp_ops(&vsmp_smp_ops);
+-#endif
+-
++ if (register_vsmp_smp_ops()) {
+ #ifdef CONFIG_MIPS_MT_SMTC
+- register_smp_ops(&msp_smtc_smp_ops);
++ register_smp_ops(&msp_smtc_smp_ops);
+ #endif
++ }
+
+ #ifdef CONFIG_PMCTWILED
+ /*
diff --git a/target/linux/patches/3.0.4/mmc-host.patch b/target/linux/patches/3.0.4/mmc-host.patch
new file mode 100644
index 000000000..3d0e37add
--- /dev/null
+++ b/target/linux/patches/3.0.4/mmc-host.patch
@@ -0,0 +1,36 @@
+diff -Nur linux-2.6.39-rc6.orig/drivers/mmc/host/Kconfig linux-2.6.39-rc6/drivers/mmc/host/Kconfig
+--- linux-2.6.39-rc6.orig/drivers/mmc/host/Kconfig 2011-05-04 04:59:13.000000000 +0200
++++ linux-2.6.39-rc6/drivers/mmc/host/Kconfig 2011-05-10 23:39:01.000000000 +0200
+@@ -253,13 +253,6 @@
+
+ If unsure, say N.
+
+-choice
+- prompt "Atmel SD/MMC Driver"
+- depends on AVR32 || ARCH_AT91
+- default MMC_ATMELMCI if AVR32
+- help
+- Choose which driver to use for the Atmel MCI Silicon
+-
+ config MMC_AT91
+ tristate "AT91 SD/MMC Card Interface support"
+ depends on ARCH_AT91
+@@ -268,18 +261,6 @@
+
+ If unsure, say N.
+
+-config MMC_ATMELMCI
+- tristate "Atmel Multimedia Card Interface support"
+- depends on AVR32 || ARCH_AT91
+- help
+- This selects the Atmel Multimedia Card Interface driver. If
+- you have an AT32 (AVR32) or AT91 platform with a Multimedia
+- Card slot, say Y or M here.
+-
+- If unsure, say N.
+-
+-endchoice
+-
+ config MMC_ATMELMCI_DMA
+ bool "Atmel MCI DMA support (EXPERIMENTAL)"
+ depends on MMC_ATMELMCI && (AVR32 || ARCH_AT91SAM9G45) && DMA_ENGINE && EXPERIMENTAL
diff --git a/target/linux/patches/3.0.4/non-static.patch b/target/linux/patches/3.0.4/non-static.patch
new file mode 100644
index 000000000..a967703d0
--- /dev/null
+++ b/target/linux/patches/3.0.4/non-static.patch
@@ -0,0 +1,33 @@
+diff -Nur linux-2.6.39-rc6.orig/fs/namei.c linux-2.6.39-rc6/fs/namei.c
+--- linux-2.6.39-rc6.orig/fs/namei.c 2011-05-04 04:59:13.000000000 +0200
++++ linux-2.6.39-rc6/fs/namei.c 2011-05-05 11:30:14.000000000 +0200
+@@ -1769,7 +1769,7 @@
+ * needs parent already locked. Doesn't follow mounts.
+ * SMP-safe.
+ */
+-static struct dentry *lookup_hash(struct nameidata *nd)
++struct dentry *lookup_hash(struct nameidata *nd)
+ {
+ return __lookup_hash(&nd->last, nd->path.dentry, nd);
+ }
+diff -Nur linux-2.6.39-rc6.orig/fs/splice.c linux-2.6.39-rc6/fs/splice.c
+--- linux-2.6.39-rc6.orig/fs/splice.c 2011-05-04 04:59:13.000000000 +0200
++++ linux-2.6.39-rc6/fs/splice.c 2011-05-05 11:31:04.000000000 +0200
+@@ -1081,7 +1081,7 @@
+ /*
+ * Attempt to initiate a splice from pipe to file.
+ */
+-static long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
++long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
+ loff_t *ppos, size_t len, unsigned int flags)
+ {
+ ssize_t (*splice_write)(struct pipe_inode_info *, struct file *,
+@@ -1109,7 +1109,7 @@
+ /*
+ * Attempt to initiate a splice from a file to a pipe.
+ */
+-static long do_splice_to(struct file *in, loff_t *ppos,
++long do_splice_to(struct file *in, loff_t *ppos,
+ struct pipe_inode_info *pipe, size_t len,
+ unsigned int flags)
+ {
diff --git a/target/linux/patches/3.0.4/sparc-include.patch b/target/linux/patches/3.0.4/sparc-include.patch
new file mode 100644
index 000000000..2f8ffd061
--- /dev/null
+++ b/target/linux/patches/3.0.4/sparc-include.patch
@@ -0,0 +1,11 @@
+diff -Nur linux-2.6.39-rc7.orig/arch/sparc/boot/btfixupprep.c linux-2.6.39-rc7/arch/sparc/boot/btfixupprep.c
+--- linux-2.6.39-rc7.orig/arch/sparc/boot/btfixupprep.c 2011-05-10 04:33:54.000000000 +0200
++++ linux-2.6.39-rc7/arch/sparc/boot/btfixupprep.c 2011-05-21 13:34:40.000000000 +0200
+@@ -25,7 +25,6 @@
+ #include <errno.h>
+ #include <unistd.h>
+ #include <stdlib.h>
+-#include <malloc.h>
+
+ #define MAXSYMS 1024
+
diff --git a/target/linux/patches/3.0.4/startup.patch b/target/linux/patches/3.0.4/startup.patch
new file mode 100644
index 000000000..68e8987b0
--- /dev/null
+++ b/target/linux/patches/3.0.4/startup.patch
@@ -0,0 +1,20 @@
+diff -Nur linux-2.6.34.orig/init/main.c linux-2.6.34/init/main.c
+--- linux-2.6.34.orig/init/main.c 2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/init/main.c 2010-05-20 20:13:26.321613615 +0200
+@@ -842,6 +842,7 @@
+ printk(KERN_WARNING "Failed to execute %s. Attempting "
+ "defaults...\n", execute_command);
+ }
++ run_init_process("/init");
+ run_init_process("/sbin/init");
+ run_init_process("/etc/init");
+ run_init_process("/bin/init");
+@@ -889,6 +890,8 @@
+ if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
+ printk(KERN_WARNING "Warning: unable to open an initial console.\n");
+
++ printk(KERN_WARNING "Starting Linux (built with OpenADK).\n");
++
+ (void) sys_dup(0);
+ (void) sys_dup(0);
+ /*
diff --git a/target/linux/patches/3.0.4/usb-defaults-off.patch b/target/linux/patches/3.0.4/usb-defaults-off.patch
new file mode 100644
index 000000000..31367108a
--- /dev/null
+++ b/target/linux/patches/3.0.4/usb-defaults-off.patch
@@ -0,0 +1,32 @@
+diff -Nur linux-2.6.37.orig//drivers/usb/core/Kconfig linux-2.6.37/drivers/usb/core/Kconfig
+--- linux-2.6.37.orig//drivers/usb/core/Kconfig 2011-01-05 01:50:19.000000000 +0100
++++ linux-2.6.37/drivers/usb/core/Kconfig 2011-04-12 19:04:23.000000000 +0200
+@@ -59,7 +59,7 @@
+ config USB_DEVICE_CLASS
+ bool "USB device class-devices (DEPRECATED)"
+ depends on USB
+- default y
++ default n
+ ---help---
+ Userspace access to USB devices is granted by device-nodes exported
+ directly from the usbdev in sysfs. Old versions of the driver
+diff -Nur linux-2.6.37.orig//drivers/usb/host/Kconfig linux-2.6.37/drivers/usb/host/Kconfig
+--- linux-2.6.37.orig//drivers/usb/host/Kconfig 2011-01-05 01:50:19.000000000 +0100
++++ linux-2.6.37/drivers/usb/host/Kconfig 2011-04-12 19:04:48.000000000 +0200
+@@ -62,6 +62,7 @@
+ config USB_EHCI_ROOT_HUB_TT
+ bool "Root Hub Transaction Translators"
+ depends on USB_EHCI_HCD
++ default n
+ ---help---
+ Some EHCI chips have vendor-specific extensions to integrate
+ transaction translators, so that no OHCI or UHCI companion
+@@ -74,7 +75,7 @@
+ config USB_EHCI_TT_NEWSCHED
+ bool "Improved Transaction Translator scheduling"
+ depends on USB_EHCI_HCD
+- default y
++ default n
+ ---help---
+ This changes the periodic scheduling code to fill more of the low
+ and full speed bandwidth available from the Transaction Translator
diff --git a/target/linux/patches/3.0.4/uuid.patch b/target/linux/patches/3.0.4/uuid.patch
new file mode 100644
index 000000000..2529fdab5
--- /dev/null
+++ b/target/linux/patches/3.0.4/uuid.patch
@@ -0,0 +1,255 @@
+diff -Nur linux-2.6.38.4.orig/block/genhd.c linux-2.6.38.4/block/genhd.c
+--- linux-2.6.38.4.orig/block/genhd.c 2011-04-21 23:34:46.000000000 +0200
++++ linux-2.6.38.4/block/genhd.c 2011-04-27 19:21:18.668912036 +0200
+@@ -34,7 +34,7 @@
+ static DEFINE_MUTEX(ext_devt_mutex);
+ static DEFINE_IDR(ext_devt_idr);
+
+-static struct device_type disk_type;
++struct device_type disk_type;
+
+ static void disk_add_events(struct gendisk *disk);
+ static void disk_del_events(struct gendisk *disk);
+@@ -1118,7 +1118,7 @@
+ return NULL;
+ }
+
+-static struct device_type disk_type = {
++struct device_type disk_type = {
+ .name = "disk",
+ .groups = disk_attr_groups,
+ .release = disk_release,
+diff -Nur linux-2.6.38.4.orig/init/do_mounts.c linux-2.6.38.4/init/do_mounts.c
+--- linux-2.6.38.4.orig/init/do_mounts.c 2011-04-21 23:34:46.000000000 +0200
++++ linux-2.6.38.4/init/do_mounts.c 2011-04-27 19:26:52.721413000 +0200
+@@ -32,6 +32,132 @@
+
+ dev_t ROOT_DEV;
+
++#ifdef CONFIG_EXT2_FS
++/* support for root=UUID=ce40d6b2-18eb-4a75-aefe-7ddb0995ce63 bootargs */
++
++#include <linux/ext2_fs.h>
++
++__u8 root_dev_uuid[16];
++int root_dev_type; /* 0 = normal (/dev/hda1, 0301); 1 = UUID; 3 = bad */
++
++/* imported from block/genhd.c after removing its static qualifier */
++extern struct device_type disk_type;
++
++/* helper function */
++static __u8 __init fromhex(char c)
++{
++ if (c >= '0' && c <= '9')
++ return (c - '0');
++ c &= ~32;
++ if (c >= 'A' && c <= 'F')
++ return (c - 'A' + 10);
++ return (0xFF);
++}
++
++static void __init parse_uuid(const char *s)
++{
++ int i;
++ __u8 j, k;
++
++ if (strlen(s) != 36 || s[8] != '-' || s[13] != '-' ||
++ s[18] != '-' || s[23] != '-')
++ goto bad_uuid;
++ for (i = 0; i < 16; i++) {
++ if (*s == '-')
++ ++s;
++ j = fromhex(*s++);
++ k = fromhex(*s++);
++ if (j == 0xFF || k == 0xFF)
++ goto bad_uuid;
++ root_dev_uuid[i] = (j << 4) | k;
++ }
++ return;
++ bad_uuid:
++ /* we cannot panic here, defer */
++ root_dev_type = 3;
++}
++
++/* from drivers/md/md.c */
++static void __init initcode_bi_complete(struct bio *bio, int error)
++{
++ complete((struct completion*)bio->bi_private);
++}
++
++static int __init initcode_sync_page_read(struct block_device *bdev,
++ sector_t sector, int size, struct page *page)
++{
++ struct bio *bio = bio_alloc(GFP_NOIO, 1);
++ struct completion event;
++ int ret, rw = READ;
++
++ rw |= REQ_SYNC;
++
++ bio->bi_bdev = bdev;
++ bio->bi_sector = sector;
++ bio_add_page(bio, page, size, 0);
++ init_completion(&event);
++ bio->bi_private = &event;
++ bio->bi_end_io = initcode_bi_complete;
++ submit_bio(rw, bio);
++ wait_for_completion(&event);
++
++ ret = test_bit(BIO_UPTODATE, &bio->bi_flags);
++ bio_put(bio);
++ /* 0 = failure */
++ return ret;
++}
++
++/* most of this taken from fs/ext2/super.c */
++static int __init check_dev(struct gendisk *thedisk, dev_t devt,
++ int blocksize, struct page *page)
++{
++ struct ext2_super_block * es;
++ struct block_device *bdev;
++ unsigned long sb_block = 1;
++ unsigned long logic_sb_block;
++ unsigned long offset = 0;
++ int rv = /* not found */ 0;
++ char bff[22];
++
++ bdev = bdget(devt);
++ if (blkdev_get(bdev, FMODE_READ, NULL)) {
++ printk(KERN_ERR "VFS: opening block device %s failed!\n",
++ format_dev_t(bff, devt));
++ return (0);
++ }
++
++ if (blocksize != BLOCK_SIZE) {
++ logic_sb_block = (sb_block*BLOCK_SIZE) / blocksize;
++ offset = (sb_block*BLOCK_SIZE) % blocksize;
++ } else {
++ logic_sb_block = sb_block;
++ }
++
++// printk(KERN_ERR "D: attempting to read %d @%lu from "
++// "bdev %p devt %08X %s\n", blocksize, logic_sb_block,
++// bdev, devt, format_dev_t(bff, devt));
++ if (!initcode_sync_page_read(bdev, logic_sb_block, blocksize, page)) {
++// printk(KERN_ERR "D: failed!\n");
++ goto out;
++ }
++ es = (struct ext2_super_block *)(((char *)page_address(page)) + offset);
++ if (le16_to_cpu(es->s_magic) == EXT2_SUPER_MAGIC) {
++// printk(KERN_ERR "D: has uuid "
++// "%02X%02X%02X%02X-%02X%02X-%02X%02X-%02X%02X-%02X%02X%02X%02X%02X%02X\n",
++// es->s_uuid[0], es->s_uuid[1], es->s_uuid[2], es->s_uuid[3],
++// es->s_uuid[4], es->s_uuid[5], es->s_uuid[6], es->s_uuid[7],
++// es->s_uuid[8], es->s_uuid[9], es->s_uuid[10], es->s_uuid[11],
++// es->s_uuid[12], es->s_uuid[13], es->s_uuid[14], es->s_uuid[15]);
++ if (!memcmp(es->s_uuid, root_dev_uuid, 16))
++ rv = /* found */ 1;
++ }
++// else printk(KERN_ERR "D: bad ext2fs magic\n");
++ out:
++ blkdev_put(bdev, FMODE_READ);
++ return (rv);
++}
++#endif /* CONFIG_EXT2_FS for UUID support */
++
+ static int __init load_ramdisk(char *str)
+ {
+ rd_doload = simple_strtol(str,NULL,0) & 3;
+@@ -218,6 +344,13 @@
+ static int __init root_dev_setup(char *line)
+ {
+ strlcpy(saved_root_name, line, sizeof(saved_root_name));
++#ifdef CONFIG_EXT2_FS
++ root_dev_type = 0;
++ if (!strncmp(line, "UUID=", 5)) {
++ root_dev_type = 1;
++ parse_uuid(line + 5);
++ }
++#endif /* CONFIG_EXT2_FS for UUID support */
+ return 1;
+ }
+
+@@ -403,6 +536,83 @@
+
+ void __init mount_root(void)
+ {
++#ifdef CONFIG_EXT2_FS
++ /* UUID support */
++// printk_all_partitions();
++ if (root_dev_type == 1) {
++ int blocksize;
++
++ /* from block/genhd.c printk_all_partitions */
++ struct class_dev_iter iter;
++ struct device *dev;
++
++ /* from drivers/md/md.c */
++ struct page *sb_page;
++
++ if (!(sb_page = alloc_page(GFP_KERNEL))) {
++ printk(KERN_ERR "VFS: no memory for bio page\n");
++ goto nomemforbio;
++ }
++
++// printk(KERN_ERR "D: root is: "
++// "%02X%02X%02X%02X-%02X%02X-%02X%02X-%02X%02X-%02X%02X%02X%02X%02X%02X\n",
++// root_dev_uuid[0], root_dev_uuid[1], root_dev_uuid[2], root_dev_uuid[3],
++// root_dev_uuid[4], root_dev_uuid[5], root_dev_uuid[6], root_dev_uuid[7],
++// root_dev_uuid[8], root_dev_uuid[9], root_dev_uuid[10], root_dev_uuid[11],
++// root_dev_uuid[12], root_dev_uuid[13], root_dev_uuid[14], root_dev_uuid[15]);
++ /* from block/genhd.c printk_all_partitions */
++// printk(KERN_ERR "D: begin iter\n");
++ class_dev_iter_init(&iter, &block_class, NULL, &disk_type);
++ while (root_dev_type && (dev = class_dev_iter_next(&iter))) {
++// char bff[22];
++ struct gendisk *disk = dev_to_disk(dev);
++ struct disk_part_iter piter;
++ struct hd_struct *part;
++ if (get_capacity(disk) == 0 ||
++ (disk->flags & GENHD_FL_SUPPRESS_PARTITION_INFO)) {
++// printk(KERN_ERR "D: ignoring\n");
++ continue;
++ }
++ blocksize = queue_logical_block_size(disk->queue);
++// printk(KERN_ERR "D: gendisk, blocksize %d "
++// "name '%s' devt %08X %s #part %d\n", blocksize,
++// disk->disk_name, dev->devt,
++// format_dev_t(bff, dev->devt),
++// disk_max_parts(disk));
++ disk_part_iter_init(&piter, disk, DISK_PITER_INCL_PART0);
++ while (root_dev_type && (part = disk_part_iter_next(&piter))) {
++ /* avoid empty or too small partitions */
++// printk(KERN_ERR "D: part #%d start %llu "
++// "nr %llu\n", part->partno,
++// (__u64)part->start_sect,
++// (__u64)part->nr_sects);
++ if (part->nr_sects < 8)
++ continue;
++ if (check_dev(disk, MKDEV(MAJOR(dev->devt),
++ MINOR(dev->devt) + part->partno),
++ blocksize, sb_page)) {
++ ROOT_DEV = part_devt(part);
++// printk(KERN_ERR "D: got match!\n");
++ // comment out below for debugging
++ root_dev_type = 0;
++ }
++ }
++ disk_part_iter_exit(&piter);
++ }
++// printk(KERN_ERR "D: end iter\n");
++ class_dev_iter_exit(&iter);
++ put_page(sb_page);
++ }
++ nomemforbio:
++ if (root_dev_type == 1)
++ printk(KERN_ERR "VFS: Unable to find root by UUID %s.\n",
++ saved_root_name + 5);
++ else if (root_dev_type == 3)
++ /* execute deferred panic from parse_uuid */
++ panic("Badly formatted UUID %s was supplied as kernel "
++ "parameter root", saved_root_name + 5);
++#endif /* CONFIG_EXT2_FS for UUID support */
++
+ #ifdef CONFIG_ROOT_NFS
+ if (MAJOR(ROOT_DEV) == UNNAMED_MAJOR) {
+ if (mount_nfs_root())
diff --git a/target/linux/patches/3.0.4/vga-cons-default-off.patch b/target/linux/patches/3.0.4/vga-cons-default-off.patch
new file mode 100644
index 000000000..178aeeeb9
--- /dev/null
+++ b/target/linux/patches/3.0.4/vga-cons-default-off.patch
@@ -0,0 +1,12 @@
+diff -Nur linux-2.6.37.orig//drivers/video/console/Kconfig linux-2.6.37/drivers/video/console/Kconfig
+--- linux-2.6.37.orig//drivers/video/console/Kconfig 2011-01-05 01:50:19.000000000 +0100
++++ linux-2.6.37/drivers/video/console/Kconfig 2011-04-12 16:29:34.000000000 +0200
+@@ -7,7 +7,7 @@
+ config VGA_CONSOLE
+ bool "VGA text console" if EMBEDDED || !X86
+ depends on !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !SUPERH && !BLACKFIN && !AVR32 && !MN10300 && (!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER)
+- default y
++ default n
+ help
+ Saying Y here will allow you to use Linux in text mode through a
+ display that complies with the generic VGA standard. Virtually
diff --git a/target/linux/patches/3.0.4/wlan-cf.patch b/target/linux/patches/3.0.4/wlan-cf.patch
new file mode 100644
index 000000000..fc20759e2
--- /dev/null
+++ b/target/linux/patches/3.0.4/wlan-cf.patch
@@ -0,0 +1,11 @@
+diff -Nur linux-2.6.39.orig/drivers/net/wireless/hostap/hostap_cs.c linux-2.6.39/drivers/net/wireless/hostap/hostap_cs.c
+--- linux-2.6.39.orig/drivers/net/wireless/hostap/hostap_cs.c 2011-05-19 06:06:34.000000000 +0200
++++ linux-2.6.39/drivers/net/wireless/hostap/hostap_cs.c 2011-09-12 02:46:26.987984145 +0200
+@@ -623,6 +623,7 @@
+ static struct pcmcia_device_id hostap_cs_ids[] = {
+ PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100),
+ PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300),
++ PCMCIA_DEVICE_MANF_CARD(0x0004, 0x2003),
+ PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777),
+ PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000),
+ PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002),
diff --git a/target/linux/patches/3.0.4/x86-build.patch b/target/linux/patches/3.0.4/x86-build.patch
new file mode 100644
index 000000000..339140f41
--- /dev/null
+++ b/target/linux/patches/3.0.4/x86-build.patch
@@ -0,0 +1,11 @@
+diff -Nur linux-2.6.39-rc6.orig/arch/x86/boot/tools/build.c linux-2.6.39-rc6/arch/x86/boot/tools/build.c
+--- linux-2.6.39-rc6.orig/arch/x86/boot/tools/build.c 2011-05-04 04:59:13.000000000 +0200
++++ linux-2.6.39-rc6/arch/x86/boot/tools/build.c 2011-05-05 20:10:07.000000000 +0200
+@@ -29,7 +29,6 @@
+ #include <stdarg.h>
+ #include <sys/types.h>
+ #include <sys/stat.h>
+-#include <sys/sysmacros.h>
+ #include <unistd.h>
+ #include <fcntl.h>
+ #include <sys/mman.h>
diff --git a/target/linux/patches/3.0.4/zlib-inflate.patch b/target/linux/patches/3.0.4/zlib-inflate.patch
new file mode 100644
index 000000000..58e1f6d21
--- /dev/null
+++ b/target/linux/patches/3.0.4/zlib-inflate.patch
@@ -0,0 +1,12 @@
+diff -Nur linux-2.6.37.orig/lib/Kconfig linux-2.6.37/lib/Kconfig
+--- linux-2.6.37.orig/lib/Kconfig 2011-01-05 01:50:19.000000000 +0100
++++ linux-2.6.37/lib/Kconfig 2011-03-01 20:10:29.833370667 +0100
+@@ -95,7 +95,7 @@
+ # compression support is select'ed if needed
+ #
+ config ZLIB_INFLATE
+- tristate
++ boolean
+
+ config ZLIB_DEFLATE
+ tristate
diff --git a/target/x86_64/kernel.config b/target/x86_64/kernel.config
index a9195da35..c9abf6e36 100644
--- a/target/x86_64/kernel.config
+++ b/target/x86_64/kernel.config
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.36
-# Thu Nov 18 20:10:57 2010
+# Linux/x86 2.6.39 Kernel Configuration
+# Thu Oct 13 08:46:44 2011
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
@@ -46,25 +46,20 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_HAVE_EARLY_RES=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
-CONFIG_X86_TRAMPOLINE=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
+CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
@@ -72,10 +67,12 @@ CONFIG_LOCALVERSION=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
-CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZMA is not set
+CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
@@ -83,13 +80,27 @@ CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_IRQ_FORCED_THREADING=y
+# CONFIG_SPARSE_IRQ is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -100,14 +111,15 @@ CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
@@ -124,6 +136,7 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
#
@@ -140,6 +153,7 @@ CONFIG_SLAB=y
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
@@ -147,12 +161,14 @@ CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
#
# GCOV-based kernel profiling
@@ -211,7 +227,7 @@ CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
#
# Processor type and features
@@ -221,22 +237,21 @@ CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
-# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
-# CONFIG_NO_BOOTMEM is not set
+CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
-CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
+CONFIG_CMPXCHG_LOCAL=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
@@ -253,12 +268,14 @@ CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
+# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
@@ -275,6 +292,7 @@ CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
@@ -289,9 +307,11 @@ CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_HAVE_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_COMPACTION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
@@ -300,12 +320,14 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
+# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
-CONFIG_X86_RESERVE_LOW_64K=y
+CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
+# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
@@ -319,7 +341,7 @@ CONFIG_SCHED_HRTICK=y
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
-# CONFIG_HOTPLUG_CPU is not set
+CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=tty0 console=ttyS0,115200n8"
@@ -329,14 +351,48 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
-# CONFIG_PM is not set
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+# CONFIG_ACPI_PROCFS is not set
+# CONFIG_ACPI_PROCFS_POWER is not set
+# CONFIG_ACPI_EC_DEBUGFS is not set
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BUTTON=y
+CONFIG_ACPI_FAN=y
+# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_HOTPLUG_CPU=y
+# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
+CONFIG_ACPI_THERMAL=y
+CONFIG_ACPI_CUSTOM_DSDT_FILE=""
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+# CONFIG_ACPI_PCI_SLOT is not set
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=y
+# CONFIG_ACPI_SBS is not set
+# CONFIG_ACPI_HED is not set
+# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_INTEL_IDLE is not set
#
# Memory power savings
@@ -348,18 +404,24 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
+# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
+# CONFIG_DMAR is not set
+# CONFIG_INTR_REMAP is not set
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_STUB is not set
# CONFIG_HT_IRQ is not set
# CONFIG_PCI_IOV is not set
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
-CONFIG_K8_NB=y
+CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_RAPIDIO is not set
#
# Executable file formats / Emulations
@@ -373,6 +435,7 @@ CONFIG_IA32_EMULATION=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
#
@@ -384,10 +447,9 @@ CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
@@ -428,7 +490,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
+# CONFIG_BATMAN_ADV is not set
CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
#
# Network testing
@@ -444,6 +509,7 @@ CONFIG_RPS=y
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
#
# Device Drivers
@@ -461,10 +527,19 @@ CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_ARCH_NO_SYSDEV_OPS=y
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
# CONFIG_BLK_DEV is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -484,16 +559,7 @@ CONFIG_SCSI_MOD=y
#
# IEEE 1394 (FireWire) support
#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
@@ -541,10 +607,13 @@ CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
+# CONFIG_N_GSM is not set
+# CONFIG_DEVKMEM is not set
#
# Serial drivers
@@ -553,6 +622,7 @@ CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
@@ -567,9 +637,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-# CONFIG_LEGACY_PTYS is not set
+# CONFIG_SERIAL_PCH_UART is not set
+# CONFIG_TTY_PRINTK is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
@@ -579,6 +648,7 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
+# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
@@ -591,12 +661,20 @@ CONFIG_DEVPORT=y
# PPS support
#
# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
+CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -613,7 +691,9 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_AGP is not set
# CONFIG_VGA_ARB is not set
+# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
+# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
@@ -638,6 +718,7 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_NFC_DEVICES is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
@@ -656,6 +737,7 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
+# CONFIG_DMI_SYSFS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
#
@@ -666,18 +748,19 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
+# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
+# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -720,14 +803,53 @@ CONFIG_TMPFS=y
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
@@ -736,8 +858,10 @@ CONFIG_FRAME_WARN=1024
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
@@ -752,6 +876,7 @@ CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
@@ -760,9 +885,11 @@ CONFIG_TRACING_SUPPORT=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
@@ -780,6 +907,7 @@ CONFIG_DEFAULT_IO_DELAY_TYPE=0
# Security options
#
# CONFIG_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
@@ -881,6 +1009,8 @@ CONFIG_CRYPTO_AES=m
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not set
#
@@ -905,7 +1035,11 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+# CONFIG_XZ_DEC is not set
+# CONFIG_XZ_DEC_BCJ is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_CPU_RMAP=y
CONFIG_NLATTR=y
+# CONFIG_AVERAGE is not set
diff --git a/target/x86_64/sys-available/shuttle-sa76 b/target/x86_64/sys-available/shuttle-sa76
new file mode 100644
index 000000000..f27898bda
--- /dev/null
+++ b/target/x86_64/sys-available/shuttle-sa76
@@ -0,0 +1,13 @@
+config ADK_TARGET_SYSTEM_SHUTTLE_SA76
+ bool "Shuttle SA76"
+ select ADK_x86_64
+ select ADK_shuttle_sa76
+ select ADK_CPU_AMDFAM10
+ select ADK_LINUX_64
+ select ADK_TARGET_WITH_VGA
+ select ADK_TARGET_WITH_SATA
+ select ADK_TARGET_WITH_INPUT
+ select ADK_TARGET_WITH_PCI
+ select ADK_TARGET_WITH_USB
+ help
+ Support for Shuttle SA76 XPC.
diff --git a/toolchain/kernel-headers/patches/3.0.4/aufs2.patch b/toolchain/kernel-headers/patches/3.0.4/aufs2.patch
new file mode 100644
index 000000000..eafbe6814
--- /dev/null
+++ b/toolchain/kernel-headers/patches/3.0.4/aufs2.patch
@@ -0,0 +1,240 @@
+diff -Nur linux-2.6.36.orig/include/linux/Kbuild linux-2.6.36/include/linux/Kbuild
+--- linux-2.6.36.orig/include/linux/Kbuild 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/include/linux/Kbuild 2011-01-10 19:52:38.000000000 +0100
+@@ -60,6 +60,7 @@
+ header-y += atmsap.h
+ header-y += atmsvc.h
+ header-y += audit.h
++header-y += aufs_type.h
+ header-y += auto_fs.h
+ header-y += auto_fs4.h
+ header-y += auxvec.h
+diff -Nur linux-2.6.36.orig/include/linux/aufs_type.h linux-2.6.36/include/linux/aufs_type.h
+--- linux-2.6.36.orig/include/linux/aufs_type.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.36/include/linux/aufs_type.h 2011-01-10 19:54:22.000000000 +0100
+@@ -0,0 +1,197 @@
++/*
++ * Copyright (C) 2005-2011 Junjiro R. Okajima
++ *
++ * This program, aufs is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
++ */
++
++#ifndef __AUFS_TYPE_H__
++#define __AUFS_TYPE_H__
++
++#include <linux/ioctl.h>
++#include <linux/kernel.h>
++#include <linux/limits.h>
++#include <linux/types.h>
++
++#define AUFS_VERSION "2.1-standalone.tree-36-20110110"
++
++/* todo? move this to linux-2.6.19/include/magic.h */
++#define AUFS_SUPER_MAGIC ('a' << 24 | 'u' << 16 | 'f' << 8 | 's')
++
++/* ---------------------------------------------------------------------- */
++
++#ifdef CONFIG_AUFS_BRANCH_MAX_127
++typedef __s8 aufs_bindex_t;
++#define AUFS_BRANCH_MAX 127
++#else
++typedef __s16 aufs_bindex_t;
++#ifdef CONFIG_AUFS_BRANCH_MAX_511
++#define AUFS_BRANCH_MAX 511
++#elif defined(CONFIG_AUFS_BRANCH_MAX_1023)
++#define AUFS_BRANCH_MAX 1023
++#elif defined(CONFIG_AUFS_BRANCH_MAX_32767)
++#define AUFS_BRANCH_MAX 32767
++#endif
++#endif
++
++#ifdef __KERNEL__
++#ifndef AUFS_BRANCH_MAX
++#error unknown CONFIG_AUFS_BRANCH_MAX value
++#endif
++#endif /* __KERNEL__ */
++
++/* ---------------------------------------------------------------------- */
++
++#define AUFS_NAME "aufs"
++#define AUFS_FSTYPE AUFS_NAME
++
++#define AUFS_ROOT_INO 2
++#define AUFS_FIRST_INO 11
++
++#define AUFS_WH_PFX ".wh."
++#define AUFS_WH_PFX_LEN ((int)sizeof(AUFS_WH_PFX) - 1)
++#define AUFS_WH_TMP_LEN 4
++/* a limit for rmdir/rename a dir */
++#define AUFS_MAX_NAMELEN (NAME_MAX \
++ - AUFS_WH_PFX_LEN * 2 /* doubly whiteouted */\
++ - 1 /* dot */\
++ - AUFS_WH_TMP_LEN) /* hex */
++#define AUFS_XINO_FNAME "." AUFS_NAME ".xino"
++#define AUFS_XINO_DEFPATH "/tmp/" AUFS_XINO_FNAME
++#define AUFS_XINO_TRUNC_INIT 64 /* blocks */
++#define AUFS_XINO_TRUNC_STEP 4 /* blocks */
++#define AUFS_DIRWH_DEF 3
++#define AUFS_RDCACHE_DEF 10 /* seconds */
++#define AUFS_RDCACHE_MAX 3600 /* seconds */
++#define AUFS_RDBLK_DEF 512 /* bytes */
++#define AUFS_RDHASH_DEF 32
++#define AUFS_WKQ_NAME AUFS_NAME "d"
++#define AUFS_WKQ_PRE_NAME AUFS_WKQ_NAME "_pre"
++#define AUFS_MFS_DEF_SEC 30 /* seconds */
++#define AUFS_MFS_MAX_SEC 3600 /* seconds */
++#define AUFS_PLINK_WARN 100 /* number of plinks */
++
++/* pseudo-link maintenace under /proc */
++#define AUFS_PLINK_MAINT_NAME "plink_maint"
++#define AUFS_PLINK_MAINT_DIR "fs/" AUFS_NAME
++#define AUFS_PLINK_MAINT_PATH AUFS_PLINK_MAINT_DIR "/" AUFS_PLINK_MAINT_NAME
++
++#define AUFS_DIROPQ_NAME AUFS_WH_PFX ".opq" /* whiteouted doubly */
++#define AUFS_WH_DIROPQ AUFS_WH_PFX AUFS_DIROPQ_NAME
++
++#define AUFS_BASE_NAME AUFS_WH_PFX AUFS_NAME
++#define AUFS_PLINKDIR_NAME AUFS_WH_PFX "plnk"
++#define AUFS_ORPHDIR_NAME AUFS_WH_PFX "orph"
++
++/* doubly whiteouted */
++#define AUFS_WH_BASE AUFS_WH_PFX AUFS_BASE_NAME
++#define AUFS_WH_PLINKDIR AUFS_WH_PFX AUFS_PLINKDIR_NAME
++#define AUFS_WH_ORPHDIR AUFS_WH_PFX AUFS_ORPHDIR_NAME
++
++/* branch permission */
++#define AUFS_BRPERM_RW "rw"
++#define AUFS_BRPERM_RO "ro"
++#define AUFS_BRPERM_RR "rr"
++#define AUFS_BRPERM_WH "wh"
++#define AUFS_BRPERM_NLWH "nolwh"
++#define AUFS_BRPERM_ROWH AUFS_BRPERM_RO "+" AUFS_BRPERM_WH
++#define AUFS_BRPERM_RRWH AUFS_BRPERM_RR "+" AUFS_BRPERM_WH
++#define AUFS_BRPERM_RWNLWH AUFS_BRPERM_RW "+" AUFS_BRPERM_NLWH
++
++/* ---------------------------------------------------------------------- */
++
++/* ioctl */
++enum {
++ /* readdir in userspace */
++ AuCtl_RDU,
++ AuCtl_RDU_INO,
++
++ /* pathconf wrapper */
++ AuCtl_WBR_FD
++};
++
++/* borrowed from linux/include/linux/kernel.h */
++#ifndef ALIGN
++#define ALIGN(x, a) __ALIGN_MASK(x, (typeof(x))(a)-1)
++#define __ALIGN_MASK(x, mask) (((x)+(mask))&~(mask))
++#endif
++
++/* borrowed from linux/include/linux/compiler-gcc3.h */
++#ifndef __aligned
++#define __aligned(x) __attribute__((aligned(x)))
++#define __packed __attribute__((packed))
++#endif
++
++struct au_rdu_cookie {
++ __u64 h_pos;
++ __s16 bindex;
++ __u8 flags;
++ __u8 pad;
++ __u32 generation;
++} __aligned(8);
++
++struct au_rdu_ent {
++ __u64 ino;
++ __s16 bindex;
++ __u8 type;
++ __u8 nlen;
++ __u8 wh;
++ char name[0];
++} __aligned(8);
++
++static inline int au_rdu_len(int nlen)
++{
++ /* include the terminating NULL */
++ return ALIGN(sizeof(struct au_rdu_ent) + nlen + 1,
++ sizeof(__u64));
++}
++
++union au_rdu_ent_ul {
++ struct au_rdu_ent __user *e;
++ __u64 ul;
++};
++
++enum {
++ AufsCtlRduV_SZ,
++ AufsCtlRduV_End
++};
++
++struct aufs_rdu {
++ /* input */
++ union {
++ __u64 sz; /* AuCtl_RDU */
++ __u64 nent; /* AuCtl_RDU_INO */
++ };
++ union au_rdu_ent_ul ent;
++ __u16 verify[AufsCtlRduV_End];
++
++ /* input/output */
++ __u32 blk;
++
++ /* output */
++ union au_rdu_ent_ul tail;
++ /* number of entries which were added in a single call */
++ __u64 rent;
++ __u8 full;
++ __u8 shwh;
++
++ struct au_rdu_cookie cookie;
++} __aligned(8);
++
++#define AuCtlType 'A'
++#define AUFS_CTL_RDU _IOWR(AuCtlType, AuCtl_RDU, struct aufs_rdu)
++#define AUFS_CTL_RDU_INO _IOWR(AuCtlType, AuCtl_RDU_INO, struct aufs_rdu)
++#define AUFS_CTL_WBR_FD _IO(AuCtlType, AuCtl_WBR_FD)
++
++#endif /* __AUFS_TYPE_H__ */
+diff -Nur linux-2.6.36.orig/include/linux/namei.h linux-2.6.36/include/linux/namei.h
+--- linux-2.6.36.orig/include/linux/namei.h 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/include/linux/namei.h 2011-01-10 19:52:38.000000000 +0100
+@@ -73,6 +73,9 @@
+ extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry,
+ int (*open)(struct inode *, struct file *));
+
++extern struct dentry *lookup_hash(struct nameidata *nd);
++extern int __lookup_one_len(const char *name, struct qstr *this,
++ struct dentry *base, int len);
+ extern struct dentry *lookup_one_len(const char *, struct dentry *, int);
+
+ extern int follow_down(struct path *);
+diff -Nur linux-2.6.36.orig/include/linux/splice.h linux-2.6.36/include/linux/splice.h
+--- linux-2.6.36.orig/include/linux/splice.h 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/include/linux/splice.h 2011-01-10 19:52:38.000000000 +0100
+@@ -89,4 +89,10 @@
+ extern void splice_shrink_spd(struct pipe_inode_info *,
+ struct splice_pipe_desc *);
+
++extern long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
++ loff_t *ppos, size_t len, unsigned int flags);
++extern long do_splice_to(struct file *in, loff_t *ppos,
++ struct pipe_inode_info *pipe, size_t len,
++ unsigned int flags);
++
+ #endif
+
diff --git a/toolchain/kernel-headers/patches/3.0.4/cleankernel.patch b/toolchain/kernel-headers/patches/3.0.4/cleankernel.patch
new file mode 100644
index 000000000..f8d5448ee
--- /dev/null
+++ b/toolchain/kernel-headers/patches/3.0.4/cleankernel.patch
@@ -0,0 +1,11 @@
+diff -Nur linux-2.6.29.1.orig/scripts/Makefile.headersinst linux-2.6.29.1/scripts/Makefile.headersinst
+--- linux-2.6.29.1.orig/scripts/Makefile.headersinst 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/scripts/Makefile.headersinst 2009-04-17 20:56:09.143476927 +0200
+@@ -65,7 +65,6 @@
+
+ targets += $(install-file)
+ $(install-file): scripts/headers_install.pl $(input-files) FORCE
+- $(if $(unwanted),$(call cmd,remove),)
+ $(if $(wildcard $(dir $@)),,$(shell mkdir -p $(dir $@)))
+ $(call if_changed,install)
+
diff --git a/toolchain/kernel-headers/patches/3.0.4/etrax-header.patch b/toolchain/kernel-headers/patches/3.0.4/etrax-header.patch
new file mode 100644
index 000000000..0c644ce25
--- /dev/null
+++ b/toolchain/kernel-headers/patches/3.0.4/etrax-header.patch
@@ -0,0 +1,75 @@
+diff -Nur linux-2.6.36.orig/arch/cris/include/arch-v10/arch/Kbuild linux-2.6.36/arch/cris/include/arch-v10/arch/Kbuild
+--- linux-2.6.36.orig/arch/cris/include/arch-v10/arch/Kbuild 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/arch/cris/include/arch-v10/arch/Kbuild 2010-11-15 17:35:24.000000000 +0100
+@@ -1,4 +1,9 @@
++header-y += dma.h
++header-y += io_interface_mux.h
+ header-y += user.h
+ header-y += svinto.h
+ header-y += sv_addr_ag.h
+ header-y += sv_addr.agh
++header-y += elf.h
++header-y += page.h
++header-y += ptrace.h
+diff -Nur linux-2.6.36.orig/arch/cris/include/arch-v32/arch/Kbuild linux-2.6.36/arch/cris/include/arch-v32/arch/Kbuild
+--- linux-2.6.36.orig/arch/cris/include/arch-v32/arch/Kbuild 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/arch/cris/include/arch-v32/arch/Kbuild 2010-11-15 17:35:24.000000000 +0100
+@@ -1,2 +1,6 @@
+ header-y += user.h
+ header-y += cryptocop.h
++header-y += elf.h
++header-y += page.h
++header-y += ptrace.h
++
+diff -Nur linux-2.6.36.orig/arch/cris/include/asm/Kbuild linux-2.6.36/arch/cris/include/asm/Kbuild
+--- linux-2.6.36.orig/arch/cris/include/asm/Kbuild 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/arch/cris/include/asm/Kbuild 2010-11-15 17:37:57.000000000 +0100
+@@ -1,10 +1,13 @@
+ include include/asm-generic/Kbuild.asm
+
+-header-y += arch-v10/
+-header-y += arch-v32/
+-
++header-y += ../arch-v10/arch/
++header-y += ../arch-v32/arch/
++
++header-y += elf.h
+ header-y += ethernet.h
+ header-y += etraxgpio.h
+ header-y += rs485.h
+ header-y += rtc.h
+ header-y += sync_serial.h
++header-y += page.h
++header-y += user.h
+diff -Nur linux-2.6.36.orig/include/asm-generic/Kbuild linux-2.6.36/include/asm-generic/Kbuild
+--- linux-2.6.36.orig/include/asm-generic/Kbuild 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/include/asm-generic/Kbuild 2010-11-15 17:37:02.000000000 +0100
+@@ -3,14 +3,17 @@
+ header-y += errno-base.h
+ header-y += errno.h
+ header-y += fcntl.h
++header-y += getorder.h
+ header-y += int-l64.h
+ header-y += int-ll64.h
+ header-y += ioctl.h
+ header-y += ioctls.h
+ header-y += ipcbuf.h
++header-y += memory_model.h
+ header-y += mman-common.h
+ header-y += mman.h
+ header-y += msgbuf.h
++header-y += page.h
+ header-y += param.h
+ header-y += poll.h
+ header-y += posix_types.h
+diff -Nur linux-2.6.36.orig/include/linux/Kbuild linux-2.6.36/include/linux/Kbuild
+--- linux-2.6.36.orig/include/linux/Kbuild 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/include/linux/Kbuild 2010-11-15 17:36:11.000000000 +0100
+@@ -365,6 +365,7 @@
+ header-y += un.h
+ header-y += unistd.h
+ header-y += usbdevice_fs.h
++header-y += user.h
+ header-y += utime.h
+ header-y += utsname.h
+ header-y += veth.h
diff --git a/toolchain/kernel-headers/patches/3.0.4/linux-gcc-check.patch b/toolchain/kernel-headers/patches/3.0.4/linux-gcc-check.patch
new file mode 100644
index 000000000..7cc381845
--- /dev/null
+++ b/toolchain/kernel-headers/patches/3.0.4/linux-gcc-check.patch
@@ -0,0 +1,18 @@
+diff -Nur linux-2.6.32.orig/arch/mips/include/asm/sgidefs.h linux-2.6.32/arch/mips/include/asm/sgidefs.h
+--- linux-2.6.32.orig/arch/mips/include/asm/sgidefs.h 2009-12-03 04:51:21.000000000 +0100
++++ linux-2.6.32/arch/mips/include/asm/sgidefs.h 2010-02-14 11:49:21.000000000 +0100
+@@ -11,14 +11,6 @@
+ #define __ASM_SGIDEFS_H
+
+ /*
+- * Using a Linux compiler for building Linux seems logic but not to
+- * everybody.
+- */
+-#ifndef __linux__
+-#error Use a Linux compiler or give up.
+-#endif
+-
+-/*
+ * Definitions for the ISA levels
+ *
+ * With the introduction of MIPS32 / MIPS64 instruction sets definitions
diff --git a/toolchain/kernel-headers/patches/3.0.4/microperl.patch b/toolchain/kernel-headers/patches/3.0.4/microperl.patch
new file mode 100644
index 000000000..2955b7421
--- /dev/null
+++ b/toolchain/kernel-headers/patches/3.0.4/microperl.patch
@@ -0,0 +1,24 @@
+diff -Nur linux-2.6.30.5.orig/scripts/headers_check.pl linux-2.6.30.5/scripts/headers_check.pl
+--- linux-2.6.30.5.orig/scripts/headers_check.pl 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/scripts/headers_check.pl 2009-09-14 21:16:21.000000000 +0200
+@@ -18,7 +18,7 @@
+ #
+ # 3) Check for leaked CONFIG_ symbols
+
+-use strict;
++#use strict;
+
+ my ($dir, $arch, @files) = @ARGV;
+
+diff -Nur linux-2.6.30.5.orig/scripts/headers_install.pl linux-2.6.30.5/scripts/headers_install.pl
+--- linux-2.6.30.5.orig/scripts/headers_install.pl 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/scripts/headers_install.pl 2009-09-14 21:16:11.000000000 +0200
+@@ -16,7 +16,7 @@
+ # 2) Drop include of compiler.h
+ # 3) Drop all sections defined out by __KERNEL__ (using unifdef)
+
+-use strict;
++#use strict;
+
+ my ($readdir, $installdir, $arch, @files) = @ARGV;
+